Pnevmatsk orodje ENG - nazwa.plnrz.nazwa.pl/wordpress/wp-content/uploads/2018/04/1/ENG... ·...

www.uniortools.com

Pneumatic tools

Future tools

Such tools have a lot of advantages over electric tools due to its safety, duration, and economy. Up until now, these tools have convinced many vehicle painters, welders or construction workers, but they found their place also in industrial manu-facturing and in the process of setting up various products.

Unior’s pneumatic tools are a welcome addition during hard work on steel constructions, bridges and in shipbuilding. There are always tasks which demand feeling and accuracy, or difficult-to-reach places which cannot be reached with larger tools.

With Unior’s pneumatic tools, each task will be mas-tered properly and with feeling, and you will save hours of time-consuming handwork.

Warning!

•Read instructions before using the tool!

•Always wear protective equipment!

Have you ever asked yourself why modern industri-al plants and workshops are equipped with pneu-matic and not with electric hand tools?

Guarantee 2 y

ears

Hig

h quality

Hig

h quality

2 years of Guarantee

Hig

h quality


Vis

oka kakovost

2 leti garancije

Why pneumatic tools?

EconomyThe advantage over pneumatic tools can already be noticed on the electricity bill. It is considerably lower when these tools are used intensely, because the compressor for the production of certain kinetic energy uses less electricity than an equal sum of electric tools.

DurabilityPneumatic tools last for hours of uninterrupted intense work and have longer useful life than electric tools. Because they do not have a motor, they cannot overheat and overload. Practically they do not need any maintenance.

SafetyThere is no risk of electrical stroke or explosion – among all working appliances with their own propulsion, pneumatic tools are the safest and can be used with no hesitation also in damp places or wet surfaces.

ErgonomicsBecause there is no (electro) motor that could hinder work, planners can closer the form to ideal ergonomic shape and intended use. For the same reason, pneumatic tools are lighter than electric tools, which is especially important when working with the tools the whole day.

Legend of symbols used in catalogue

Code

Weight in grams

Packaging

Dimension

Number of items

Outer dimension in mm

1/2” point

3/8” point

3/4” point

1” point

1. 1/2” point

Guarantee 2 y

ears

Hig

h quality

Hig

h quality


Hig

h quality


Vis

oka kakovost

2 leti garancije

Contact information

Photographs in this catalogue are symbolic.

UNIOR d.d.Kovaška cesta 10, 3214 ZREČE, Slovenia

T: +386 3 757 81 00F: +386 3 576 26 43

I: www.uniorotools.comE: [email protected]

2

1/4”

3/8”

1/4”

3/8”

1/2”

1/4”

3/8”

3/8”

1/4”

1/2”

1/4”

3/8”

1/4”

3/8”

1/2”

1/2”

1/2”

1/2”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”1/4”

1/4”

3/8”

1/4”

3/8”

3/8”

1/4”

1/2”

3/8”

1506 KN 617795 1/4” 20

1506 KN 617796 3/8” 20

1506 KZ 617793 1/4” 20

1506 KZ 617794 3/8” 20

1506 PN 617791 1/4” 19

1506 PN 617792 3/8” 19

1506 PZ 617788 1/4” 19

1506 PZ 617789 3/8” 19

1506 PZ 617790 1/2” 22

1507 N 617799 1/4” 15

1507 N 617800 3/8” 19

1507 Z 617797 1/4” 14

1507 Z 617798 3/8” 19

1507 Z 618483 1/2” 22

How to fasten with the right wrench?

How to connect Unior Pneumatic tools?

Alternative connection between article 1508 A and 1508 B when working on the cleanest surfaces (for example the dashboard of a car).

Air inlet

Maximum air pressure: 9,5 bar

600l/min

617735 Art. 1500

1800l/min

617736 Art. 1501

2300l/min

617737 Art. 1502 618483 Art. 1507 Z

3/8” = 617798

617798 Art. 1507 Z

1/4” = 617797

617797 Art. 1507 Z

617788 Art. 1506 PZ

617789 Art. 1506 PZ

617793 Art. 1506 KZ

617794 Art. 1506 KZ

Art. 1505

3/8” = 617745 (11x16/9m)3/8” = 617748 (11x16/12m)

1/4” = 617743 (6.5x10/9m)1/4” = 617744 (8x12/9m)1/4” = 617746 (6.5x10/12m)1/4” = 617747 (8x12/12m)

3/8” = 617745 (11x16/9m)3/8” = 617748 (11x16/12m)

1/4” = 617743 (6.5x10/9m)1/4” = 617744 (8x12/9m)1/4” = 617746 (6.5x10/12m)1/4” = 617747 (8x12/12m)

617767 Art. 1508 A

617768 Art. 1508 B

Code Inlet thread mm

3

1/4”

3/8”

1/4”

3/8”

1/2”

1/4”

3/8”

3/8”

1/4”

1/2”

1/4”

3/8”

1/4”

3/8”

1/2”

1/2”

1/2”

1/2”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”1/4”

1/4”

3/8”

1/4”

3/8”

3/8”

1/4”

1/2”

3/8”

How to connect Unior Pneumatic tools?

Alternative connection between article 1508 A and 1508 B when working on the cleanest surfaces (for example the dashboard of a car).

www.uniortools.com

617788 Art. 1506 PZ

617789 Art. 1506 PZ

617793 Art. 1506 KZ

617794 Art. 1506 KZ

1/4” = 617797

617797 Art. 1507 Z

618483 Art. 1507 Z

617798 Art. 1507 Z

617728 Art. 1517 P

617729 Art. 1517 S

615320 Art. 1541

615322 Art. 1561

615319 Art. 1551

615321 Art. 1562

615324 Art. 1571

617718 Art. 1514 A1

617719 Art. 1514 A2

617720 Art. 1514 A3

617721 Art. 1514 A4

617722 Art. 1514 A5

617723 Art. 1514 A6

615325 Art. 1591

615326 Art. 1592

617690 Art. 1596

617691 Art. 1597

615323 Art. 1572

617733617713 Art. 1510

617714617715 Art. 1514

617726 Art. 1515

617727 Art. 1515 H

617731 Art. 1516

617732 Art. 1516 A

615318 Art. 1531

617730 Art. 1518

Art. 1205/1610501 D = 115 mm610502 D = 125 mm

Art. 1205/2610505 D = 115 mm610506 D = 125 mm

Art. 1207/2610509 D = 115 mm610510 D = 115 mm610511 D = 125 mm610512 D = 125 mm

Art. 1200/1610484 D = 115 mm610485 D = 125 mm

Art. 1200/2610488 D = 115 mm610489 D = 125 mm

Art. 1202/2610492 D = 115 mm610493 D = 115 mm610494 D = 125 mm610495 D = 125 mm

Art. 1216610539 D = 115 mm610540 D = 115 mm610541 D = 115 mm610542 D = 115 mm610543 D = 115 mm610544 D = 125 mm610545 D = 125 mm610546 D = 125 mm610547 D = 125 mm610548 D = 125 mm

4

Pneumatic sander

For a perfect surfaceThe advantage of this silent and compact tool is its ergonomically shaped handle, which al-lows good grip and prevents slipping, on the other hand it is suitable for lefthanders as well as for right-handers. The sander has an additional function of sucking dust that is produced during work. It is also distinguished with a handy switch and a silent and powerful drive. It operates on the principle of eccentric circular moves without producing vibrations. On the working platform, the pneumatic sander does not leave edges and is therefore suitable for larger surfaces. An integrated speed regulator allows all kinds of works – from aggressive sanding to soft smoothening during finishing works.

Pneumatic sander1510

No. L A D 617733 2.5 220 105 150 1186 1

617713 5 220 105 150 1186 1

Advantages• the ergonomic shape of the handle enables good

grip and prevents gliding

• suitable for lefthanders as well as for right-handers

• silent and powerful drive

•handy on/off switch

•exhaustion of parts into a bag for a cleaner workplace

• flexible and robust pipe for cleaning dust

• it does not leave edges on the working platform

•better work conditions due to minimal vibrations

•extreme power based on its weight (1.2 kg)

Use•vehicle workshops

•preparation of different working platforms for further process

• ideal for grinding construction steel, metals and wood

• free speed 10.000 revolutions per minute

•maximum working pressure: 6.2 bar

•air consumption: 368 l/min

•mir inlet: 1/4”

•VELCRO™ sander pad

5

1510-2.5 mm (617733) 1510-5 mm (617713)

Operating principle of the sanderIt operates on the principle of eccentric circular

moves, as shown in the picture. The VELCRO™ system enables a simple fastening of the sanding

pad. An additional exhaust of the sander prevents dusting in the room.

Environmentally friendly polyurethane foam which prevents vibrations.

Durable and fiberglass-covered surface.

The VELCRO™ system for fastening sander pads.

Suction of dust from the working platform.

The basis of sander is VELCRO™ system which is: quick,

simple and safe to mount and unmount various sander pads.

This system is being used for various occasions - the best known example is training

shoes with VELCRO™ fastening.

The advantage of the sander pad

6

•used for cutting sheet, bolts and removing welding slags, rivets, plaster and tiles

•with spring, quick change retainer as spare parts

•bore diameter: 9.1 mm


•air inlet: 1/4”

Stroke pneumatic hammer

Enormous striking powerThe stroke pneumatic hammer is used for repairing and handling of bodywork, cutting body sheet and screws, removing welds and other things.

Besides that, it is also suitable for working on various types of walls, concrete, stones, bricks, steel, and alloy of light metals. For each type of material and work, a suitable Unior chisel is needed. The pneumatic stroke hammer has a change retainer, with which change of chisels is much easier, so the work with such tool becomes more efficient and safe to use.

Stroke pneumatic hammer1514

Advantages• light and compact tool, used also in

small rooms

•wide range of use

•change retainer

Use•car industry

•cutting of sheet metal and screws

• removal of welds

•working on walls, concrete, stones, bricks, steel, light metals

Spare parts

alternate change retainer for art. 1514 (617717)

alternate spring for art. 1514 (617716)

stroke per minute L A D

617714 3000 170 150 19 1600 1

617715 2100 225 150 19 2400 1

7

Chisels for stroke pneumatic hammer art. 1514

Flat chisel 1514 A1Shaping and cleaning of welds, trimming of bolts and nails, production of slots, cleaning and evening of uneven surfaces.

Pointed chisel 1514 A2 Removing pins and rivets, making holes.

Rivet and welding slag chisel 1514 A3Removing rivets and welding slags.

Sheet cutting chisel 1514 A4 Cutting sheet metal.

“v” edge chisel 1514 A5Cutting sheet metal.

Spade chisel 1514 A6Shaping and cleaning of welds, trimming of bolts and nails, production of slots, cleaning and evening of uneven surfaces.

8

• reversible turning

• free speed: 1.800 revolutions per minute




•chuck capacity: 1.0-10 mm

• spindle thread: 3/8”, 24 UNF

• internal hose size: 10 mm

Pneumatic drills

Less vibrations, more powerThe pneumatic drill enables exact drilling into metals. The speed and rotation direction are adaptable, the handle, made of plastic material, eases the vibrations, which enables full controlled drilling. This lightweight, handy, but powerful drill is suitable also because of its quick change retainer. The robust body and qualitative production ensure a long useful life of the product. Pneumatic drills are an ideal working solution in workshops and industrial manufacturing.

L A 617726 190 150 1150 1

Advantages•extreme power based on its size

• lightweight, compact and easy-to-master tool

•handy turn-on switch

•ergonomically shaped handle of plastics material dampens vibrations


•quick change retainer

Set includes•pneumatic drill

•warranty statement

• instructions for use

Quick change retainer 3/8”enables simple exchange ofvarious drills.

Fast switch which needs a minimal force for turning on the tool.

The handle is soft and protects the user from “cold” and vibrations.

Durable housing with very goodweight/power ratio.

Simple switching of the direction of

rotation.

Pneumatic drill 1515

9


• free speed: 800 revolutions per minute



•air Inlet: 1/4”

•chuck capacity: 1.5-13 mm

• spindle thread: 3/8”, 24 UNF


L A 617727 220 260 1570 1

Pneumatic drill with handle1515 H

Advantages•extreme power based on size

• lightweight and easy-to-master tool

•adjustable handle for better support


•ergonomically shaped handle for work without effort

•plastic cover for handle dampens vibrations


•quick change retainer

Set includes•pneumatic drill

•adjustable handle



Quick change retainer 3/8” enables simple exchange of various drills.

Fast switch which needs a minimal force for turning on the tool.

The handle is soft and protects the user from “cold” and vibrations.

Durable housing with very goodweight/power ratio.

Simple switching of the direction of rotation.

The adjustable handle offers additional support, prevents slipping of hands.

10





•chuck capacity: 6 mm


Pneumatic die grinder

Extensive power in small packagesThe pneumatic die grinder is meant for finishing precision engineering, tooling, car- and aero-nautical industry. It is especially suitable for grinding, polishing, milling, shaping or cleaning of welds and products of metal, glass, plastic materials or wood. All kinds of standard grind, polish plugs and grinding caps that are available on the market can be used.

Pneumatic die grinder 1516

L A 617731 155 60 390 1

Quick change retainer of the grinder makes the work much easier and saves time when retaining due to two enclosed wrenches.

The rubber protecting the user from vibrations is soft to the touch.Fast and simple

continuously variable regula-tion of rpm.

Safety lever which prevents accidental turn-on and

injuries to the user.

Advantages• safety lever for prevention of accidental

turn-on

• simple clamping of thin cut-off wheels (grinding/polishing pins) and other parts/extensions

•extreme power based on size

• lightweight and compact tool

•continuously variable regulation of rpm

Use•precise grinding

• full grinding

• tool industry

•car industry

•aeronautical industry

•cleaning of welds

•cleaning of concrete and wall surfaces

•cleaning of wooden surfaces

• removal of colors and varnish

• removal of rust

•grinding of bearings

•grinding of motor valves

•grinding of gears and coils

•various other surfaces

Set includes•pneumatic die grinder

• two wrenches



11

”







Advantages• this angle edition enables access to

difficult-to-reach places which normal grinders cannot reach

• safety lever which prevents accidental turn-on

• simple clamping of thin cut-off wheels (grinding/polishing pins) and other parts/extensions

•extreme power based on size

• small and compact tool

•continuously variable regulation of rpm

Use•precise grinding

• full grinding

• tool industry

•car industry



•cleaning of concrete and wall surfaces

•cleaning of wooden surfaces

• removal of colors and varnish

• removal of rust

•grinding of bearings

•grinding of motor valves

•grinding of gears and coils

•various other surfaces

Set includes•pneumatic angle die grinder

• two wrenches



L A 617732 162 76 520 1

Quick change retainer of the grinder makes the work much easier and saves time when retaining due to two enclosed wrenches.

The rubber protecting the user from vibrations is soft to the touch.Fast and simple

continuously variable regula-tion of rpm.

Safety lever which pre-vents accidental turn-on and injuries to the user.

The angle type of the pneumatic die grinder allows us to reach places unable to reach with standard pneumatic die grinders.

Pneumatic angle die grinder 1516 A

12







• spindle thread: 5/8”

Pneumatic sander

Adaptability on requestThe handy pneumatic angle sander is used for light works in manufacturing, espe-cially in the car industry.

This angle sander is well-built and equipped with a handle which can be placed on the left or on the right side of the tool. When trying to work in small and difficult-to-reach places, the handle can be removed.

The polishing paper is placed on the carrying surface of the tool with the help of a fastening nut, which has to be fastened by hand first and afterwards with the en-closed wrench.

Pneumatic angle sander1517 S

Advantages• light and compact tool

• suitable for lefthanders as well as right-handers

• removable handle


Use•grinding of welds

•grinding of sharp edges

• reparation of small uneven surfaces

Set includes•pneumatic angle grinder

• two wrenches



L A D 617729 375 100 175 2165 1

13

Pneumatic polisher

Polishing without effortThe pneumatic polisher is used especially in the car industry. The polisher is well-built and equipped with an adjustable handle which can be placed on the left or on the right side of the tool. When trying to work in small and difficult-to-reach places, the handle can be removed.

This polisher has less rpm than grinding machines; therefore special polishing textile can be placed on the carrying surface. It is not fastened with a nut, but only with a suction cup to the polishing textile.


• suitable for lefthanders as well as right-handers



Pneumatic angle polisher1517 P







• spindle thread: 5/8”

L A D 617728 375 100 175 2165 1

Use•grinding of welds

•grinding of sharp edges

• reparation of small uneven surfaces

Set include•pneumatic angle grinder

• two wrenches



14

Pneumatic grinder

Without extra layersIt is used to perform various kinds of work. It removes extra material like rust, color and similar very fast. It is suitable for shaping of welds and for grinding various complex forms and cut-ting construction materials.

Tool is supplied with replaceable handle and protection from fast spinning parts which pro-tects the user from injuries of potential flying parts.

A tool safety mechanism prevents unwanted switch-on of the tool and so protects the user from accidental threats or injuries. Saying so, the user cannot turn on the switch by pressing only the switch, but first has to shift the safety lever which prevents unwanted turn-on.

Pneumatic angle grinder1518

Advantages• safety lever prevents unwanted turn-on


•protection from rotating parts

•also usable in small rooms/places

Use• tooling


•cutting profile carriers and sheet metal

•cleaning of concrete, walls and wooden surfaces

• removal of colors varnish and rust

•other home use

L A D 617730 230 90 125 1920 1





15

Pneumatic ratchets

Unlimited ways of useThe Unior ratchet is a must-have tool in car repairs, domestic workshops, and nearly all other demanding industrial businesses. Various different types of Unior sockets can be used with this tool, which expands its field of use to infinity. This well-produced implementation of the tool’s head enables greater flexibility in difficult-to-reach places and a wider specter of use.

It is adaptable to the user's hand, making it easy to use and at the same time enables fast change of the tool working direction. Endurable gear wheels are produced in accordance with the most demanding quality standards.

A L Torque 615319 1/2” 45 254 81 1200 1

A L Torque 615318 3/8” 37 165 27 520 1

Pneumatic reversible ratchet 3/8”

1531


•max. torque: 27 Nm




•max. bolt size: M6

Pneumatic reversible ratchet 1/2”

1551








•quality production


• fast and handy adjustment of the rotation direction

• sluice-gate enabling prevention of air inlet into the tool

Use•car industry

•agricultural equipment

•heavy industry

• larger construction machinery

• individual mounting

Important!The use of Unior IMPACT sockets is recommended.

16

Universal use for different types of workUnior’s pneumatic hammers with controlled torque enable fast screwing (fastening and unfastening) and can handle the most hard-to-handle nuts and oxidized screws. They are uni-versal and can therefore be used in different types of mounting where maximum torques and forces are needed. They are becoming more and more popular also in domestic garages.

The basic functions of all Unior pneumatic hammers are the same as – they all enable torque adjustment and determination of the direction of rotation, but differ from the maximum torque, way of regulation and overall maximum socket size.

Pneumatic hammers

3/8” pneumatic reversible hammer1541

A L Torque 615320 3/8” 175 139 271 1350 1







Advantages•controlled torque

• fast screwing

•wide range of use

Use•car industry

•agricultural equipment

•heavy industry

• shipbuilding


• larger construction machinery

• individual mounting

How to set the rotation direction of the tool

Important!Always use Unior IMPACT sockets.

17

271 Nmart. 1541

542 Nmart. 1561

813 Nmart. 1562

1016 Nmart. 1571

1491 Nmart. 1572

2439 Nmart. 1591

2439 Nmart. 1592

3388 Nmart. 1596

4065 Nmart.1597

1/2” pneumatic reversible hammer

1561 1/2” pneumatic reversible hammer

1562

A L Torque 615321 1/2” 200 200 813 2800 1

A L Torque 615322 1/2” 175 139 542 2600 1

• free speed: 8.000 revolution per minutes












Max. torque [Nm]

18

A L Torque 615325 1” 180 495 2439 12500 1

A L Torque 615323 3/4” 235 220 1491 5600 1


1572

1” pneumatic reversible hammer

1591

1” pneumatic reversible hatchet

1592

1.1/2” pneumatic reversible hammer

1596

1.1/2” pneumatic reversible hatchet

1597

A L Torque 617690 1.1/2” 145 450 3388 15800 1

A L Torque 617691 1.1/2” 145 465 4065 19700 1


•max. torque: 1.491 Nm

•maximum woking pressure: 6.2 bar
















A L Torque 615326 1” 280 307 2439 10620 1














1571

A L Torque 615324 3/4” 240 236 1016 4550 1



•maximum working pressure : 6.2 bar




19

Sets of stroke pneumatic hammers

Pneumatic ratchet and IMPACT socket set 3/8” in metal box

1535

615513 13 1

Art. Dim.

1531 37

230.4 75, 125 (12,5)

230.8 6-12, 13-21

230 3/8” 8, 10, 11, 12, 13, 15, 17

1374 50 ml

Pneumatic hammer and IMPACT socket set 3/8” in metal box

1545

615514 13 1

Art. Dim.

1541 175

230.4 75, 125 (12,5)

230.8 6-12, 13-21

230 3/8” 8, 10, 11, 12, 13, 15, 17

1374 50 ml

Pneumatic ratchet and IMPACT socket set 1/2” in metal box

1555

615515 12 1

Art. Dim.

1551 45

231.4 125 (16,9)

231.5 75 (16,9)

231.8 10-15, 16-32

231 1/2” 10, 13, 14, 17, 19, 21, 22, 24

1374 50 ml

Pneumatic hammer and IMACT socket set 3/4” in box

1575

617161 7 1

Art. Dim.

1571 240

232 3/4” 19, 24, 27, 32, 36, 41

Pneumatic hammer and IMPACT socket set 1/2” in metal box

1565

615516 20 1

Art. Dim.

1561 175

231.4 125 (16,9)

231.5 75 (16,9)

231.8 10-15, 16-32

231 1/2” 10, 13, 14, 17, 19, 21, 22, 24

231 L 17, 19, 21, 22, 24, 27

1374 50 ml

Stroke pneumatic hammer, with set of chisels

1514 PB

619964 8 1

Art. Dim.

1514 170

1514 A1 182

1514 A2 180

1514 A3 180

1514 A4 180

1514 A5 190

1514 A6 178

981 PB2 307

20

Pneumatic equipment

•maximum working pressure: 10.9 Bar

•air consumption: 220 l/m



Long pneumatic duster1508 B

Pneumatic duster1508 A




•working pressure: 0.5-8.5 bar

•working temperature: 5-60 °C

• filtering grade: 5µ

• filter capacity: 15 ml

• lubricator capacity: 25 m



•air consumption: 1.800 l/min

•working pressure: 0,5-8,5 bar




• lubricator capacity: 90 ml

Pneumatic filter regulator and lubricator 1/4”

1500

Pressure gauge for 1501 in 1502

1501 PG


1501

Pressure gauge for 15001500 PG

Cups set for 15001500 C

L A D 617768 420 135 6 145 10

L A D 617767 260 135 6 130 10

617742 20 1

617738 70 1

L A 617736 150 220 1195 1

L A 617735 90 155 415 1

617741 55 1

21

•plastic housing

•outside tread

•metal housing

•outside tread

• inside hose diameter Ø 7 mm

•outside tread

•plastic housing

• inside tread

•metal housing

• inside tread

• inside hose diameter Ø 7 mm

• inside tread

Coupling, female part1506 PZ

Coupling, female part1506 KZ

Coupling, male part1507 Z

Coupling, female part1506 PN

Coupling, female part1506 KN

Coupling, male part1507 N

L 617788 R1/4” 19 72 124 10

617789 R3/8” 19 70 136 10

617790 R1/2” 22 75 340 10

L 617791 R1/4” 19 60.5 123 10

617792 R3/8” 19 60.5 114 10

L 617797 R1/4” 14 34 18 10

617798 R3/8” 19 36.5 28 10

618483 R1/2” 22 39 38 11

L 617799 R1/4” 15 37.5 24 10

617800 R3/8” 19 39 30 10

618484 R1/2” 25 40 40 1

L 617793 R1/4” 20 58 104 10

617794 R3/8” 20 54 94 10

L 617795 R1/4” 20 54.5 110 10

617796 R3/8” 20 55 102 10

Spiral pneumatic hose 1505

L D 617743 1/4” 9 6.5 x 10 800 1

617744 1/4” 9 8 x 12 1000 1

617745 3/8” 9 11 x 16 1500 1

617746 1/4” 12 6.5 x 10 1000 1

617747 1/4” 12 8 x 12 1200 1

617748 3/8” 12 11 x 16 2300 1



•air consumption: 2.300 l/min

•working pressure: 0.5-8.5 bar




• lubricator capacity: 90 ml


1502

L A 617737 150 220 1395 1

UNIOR d.d.Kovaška cesta 10

3214 ZrečeSlovenia

T: +386 (0) 3 757 81 00F: +386 (0) 3 576 26 43

E: [email protected]: www.uniortools.com

Pnevmatsk orodje ENG - nazwa.plnrz.nazwa.pl/wordpress/wp-content/uploads/2018/04/1/ENG... ·...

Documents

Transcript of Pnevmatsk orodje ENG - nazwa.plnrz.nazwa.pl/wordpress/wp-content/uploads/2018/04/1/ENG... ·...