1. Online Recruitment SystemAbstract:

Project Details: The project entitled “Online Recruitment System” is assigned by the organization.

The aim is to provide services to both the Employer and the Graduate by recruiting Graduates according to the employer specifications. The main flow of the project goes as follows.

The three main users involved in this system are1. Graduate 2. Employer3. Administrator

Graduate is the one who is looking for a job in the same organization who can be either a fresher or an experienced.

Employer is a resource of the organization who specifies the requirements. From each department only one authorized person acts as an employer.

Administrator is also a resource of the organization from HR department. He/she acts as a mediator between the employer and the graduate.

Graduate gives the complete details about his/her Personal, Educational and Skills which can be updated accordingly until a valid period of three months.

Whenever there is a vacancy, the employer comes into play by specifying the requirements which are viewed by the registered graduate.

Administrator is responsible to intimate the eligible students for that particular post through e-mail and also updates the employee database according to the instructions given by the employer after the complete process of interview.

Existing System: The company recruits graduates by maintaining manual records which involves many loop holes.

Drawbacks:

1. Redundancy: Manual records tend to contain data which are redundant. This is because Normalization followed is consistent data base is missing feature in manual records.

2. Inconsistency: Because of redundant data, there is no consistency in the data.

3. Time Consuming: Maintaining each students and employees data with much number of fields is a tedious process and takes more time to retrieve back.

4. Improper Validation: There are many cases where validation is to be performed between the existing data and yet to be entered data. Also, a graduate who appears for the interview and fails to succeed should not be reconsidered until a period of 3 months.

5. Tedious: An organization data base goes through many numbers of updates each day

which is hard to maintain in registers.

6. More HR: In order to maintain the information of all the employees and students who

applied for different jobs a special group of employees should be hired, which ultimately tends to the waste of resources.

Problem Solution:

The existing system should be replaced with a totally automated “online recruitment system” which enables easy and flexible manipulations of various activities.

The first step of system analysis involves the identification of need.

The lists of requirements that are identified are:

Registered graduates should be eligible to apply for one or many available jobs only if the given job requirements match with their skill sets.

Unregistered graduates cannot interactive and user friendly site is required for all graduates, employers and administrator.

New graduates cannot access the system functionality until they are registered. From each department administrator assigns a single employee as an employer. The employer is responsible to post the job requirements along with the

selected student information after the complete recruitment process. The administrator is the mediator between the graduate and the employer. Normalized database should be maintained which yields in consistent results. Generating reports at regular intervals which are helpful in decision making.

The product developed shall be named as “ONLINE RECRUITMENT SYSTEM”

Analysis:

Existing System: The company recruits graduates by maintaining manual records which involves many loop holes.

Drawbacks:

1. Redundancy: Manual records tend to contain data which are redundant. This is because Normalization followed is consistent data base is missing feature in manual records.

2. Inconsistency: Because of redundant data, there is no consistency in the data.3. Time Consuming: Maintaining each students and employees data with much number of fields is a tedious process and takes more time to retrieve back.

4. Improper Validation: There are many cases where validation is to be performed between the existing data and yet to be entered data. Also, a graduate who appears for the interview and fails to succeed should not be reconsidered until a period of 3 months.

5. Tedious: An organization data base goes through many numbers of updates each day

which is hard to maintain in registers.

6. More HR: In order to maintain the information of all the employees and students who

applied for different jobs a special group of employees should be hired, which ultimately tends to the waste of resources.

Proposed System:

The developed system overcomes all the above listed drawbacks.

All the Graduates, Employer and Administrator information is maintained in normalized database instead of manual records.

This feature helps in maintaining database which is consistent, not redundant and easily maintainable.

This system helps in restricting any graduate to register itself multiple times. The three main users are

1. Graduate

2. Employer3. Administrator

Graduate is the one who is looking for a job in the same organization who can be a fresher or an experienced.

After entering all the details, the graduate can view a page containing all the vacancies available.

Graduate can now apply to one or any number of jobs whose interview details are later intimated by the Administrator.

Employer is a resource of the organization from HR department. He/she acts as a mediator between the employer and the graduate.

The graduate gives the complete details about his/her Personal, Educational and Skills which can be updated accordingly until a valid period of six months.

Whenever there is a vacancy the employer comes into play by specifying the requirements to the administrator.

Administrator generates report to view the systems usage by the graduates and the employers in the recruitment process in a periodical base.

The report specifies the number of applied and selected graduates for all the designations with the details in brief.

Feasibility study: Whenever we design a new system, normally the management will ask for a feasibility report of the new system. The management wants to know the technicalities and cost involved in creation of new system.

- Technical feasibility - Economic feasibility - Physical feasibility

Technical feasibility: Technical feasibility involves study to establish the technical capability of the system being created to accomplish all requirements to the user. The system should be capable of handling the proposed volume of data and provide users and operating environment to increase their efficiency. For example, system should be capable of handling the proposed volume of data and provide users.

Economic feasibility:

Economic feasibility involves study to establish the cost benefit analysis. Money spent on the system must be recorded in the form of benefit from the system. The benefits are of two types: Tangible benefits:

- Saving man labor to do tedious tasks saves time. Intangible benefits:

- Improves the quality of organization.

Physical feasibility: It involves study to establish the time responses of the new system being created. For e.g., if the new system takes more than one day to prepare crucial finance statement for the management, wherever it was required in an hour, the system fails to provide the same. It should be clearly establish that the new system requirements in the form of time responses would be completely met with. It may call for increase in cost. If the required cost is sacrificed then the purpose of the new system may not be achieved even if it was found to be technically feasible.

Scope of the Project:

The proposed system will affect or interface with the activities of graduate, employer and administrator. The system works and fulfills all the functionalities as per the proposed system. It will provide reduced response time against the queries made by different users. The administrator will have a clear view of number of vacancies for a particular job, number of candidates applied and number of candidates selected. All possible features such as verification, validation, security, user friendliness etc have been considered.

The different types of modules present in this project are

Proposed System:1. User Interface

- Login- Register - Change password- Edit profile

- Apply for jobs2. Online exam

- Deployment of question paper - Automatic uploading- Evaluation of answer sheets

3. Check status- employer- graduate

4. Verification - Voter id - Passport no - Driving license no - Graduation registration no 5. Administration - Create employer - Delete employer 6. Generate report - Generates the no of graduates registered - Generates the no of graduates selected

Software Requirements:

Programming language - .NET (ASP.NET 3.5, C#.NET) Web server - IISDatabase - Oracle 9iWeb technologies - HTML, Java scriptOperating system - Windows XP, 98, 2000

Hardware Requirements:

Processor - Intel Pentium III or IVMemory - 2 GB RAM or greater

Design:

In the present use case diagram we have three actors.The actors are Graduate, Administrator and Employer.The use cases are user interface, online exam, and check status, mailing and generating reports.

USER INTERFACE

REGISTER

EDIT PROFILE

LOGIN

APPLYING FOR JOBS

<<extend>>

<<include>>

<<extend>>

<<extend>>

USER INTERFACE

In the user interface module we have sub modules like register, login, edit profile and apply for jobs.Registering is mandatory for the user.The user can edit his profile by going to edit profile. During registering the graduate would be given a unique id which he has to use as his further proceedings.

CHECK STATUS

INTERVIEW RESULTS

STATUS UPDATION

CHECK STATUS

Check status is used by the graduate to see his status whether he is selected or not. It is also used by the employer to see whether he is eligible for the post. It is used by the administrator to change the status of both the graduate and the administrator.

ONLINE EXAM

QUESTION PAPEWR DEPLOYMENT

AUTOMATIC UPLOADING

EVALUATION

<<include>>

<<include>>

<<include>>

ONLINE EXAM

During the online exam the student goes to the prometric center and writes the exam. There initial validation will be done. (His photo)First the deployment of the question paper will be done at the main server of the prometric center. The uploading of the answer sheet will be done to the main server.The answer sheet will be loaded in the database and will be evaluated.

Reports will be generated by the administrator.He will generate both weekly and monthly reports. He will be preparing the reports based on the number of people applied and the number of people who got selected.

GENERATING

REPORTS

WEEKLY REPORTS

MONTHLY REPORTS

<<include>>

<<include>>

GENERATING REPORTS

In the class diagram we have three classes that is the graduate, administrator and the employer.

Activity diagram:

In the user interface register the user has to give all his mandatory fields then only he will get the form if not he will not be given form. After entering all the details he has to submit his form His entire details will be stored in the database server.

In the administrative interface login the administrator has to give his e-mail id and password to access his details. From here he can interact with the

graduate and the employer He can select employer in each and every department.

Edit profile

enter the graduate id and passwd

Edit profile

YES

Update profile

Please enter the id correctly

NO

is valid

Edit profile is used by the graduate to change his profile. He can change his profile if in the mean time he completes any certification courses. For this he has to give his emailed and password or his registration number to access his account.

Enter the graduate id and passwd

Incorrect id

Get job deatails

Ap[ply for job

Eligibility check

you are inelligible

Store in DB details

Applying for job

yes

no

yes

no

The graduate can apply for one or many no of jobs. But he has to first satisfy the eligibility check. Depending upon the eligibility he will be given the form. If he meets the company’s requirements he will be notified in his homepage.

Deploy the question paper to the local server

Get the time set by the administrator

Get the time from internet server

If both times are same

NO

YES

ONLINE EXAM

If the time set by the administrator and the time set the internet server becomes same then the deployment of the question paper will be done This will be done in the main server. Then from here it will be transformed to all the clients (i.e. all the systems.)

Sequence diagrams:

:personaldetailsform

:personal details servlet

:grad details table

educational & reference form

1:Enter Data & Check form

2:Submit

3:Mountdb & setquery4:process db

5:Accept results

6:Show form

PERSONAL DETAILS ENTRY

First the user has to give his details in the educational details entry form, there the self checking will be done and it will be submitted to the personal details servlet. From there the user can mount the database and set the query in the grad details table where the processing will be done in the database. Then the educational and reference form will be show.

:educational&reference form

:educational servlet

:graduate table :grad tech skills form

:grad ref table

EDUCATIONAL & REFERENCE DETAILS ENTRY

1:Enter details & Check form

2:submit

3:Mount db&set query4:Process db

5:Accept result

6:Set query7:Process db

8:Accept result

9:Show form

In the educational and reference form he has to give his details where self checking will be done. Then he will submit his form to the educational servlet. He can mount the database and set the query. Then the form will be showed to him.

:grad experience form

:experience servlet

:grad experience table

1:Enter details & check form

2:Submit

3:Mount db & set query

4:Process db

5:Accept Values

6:Display Unique id

EXPERIENCE DETAILS ENTRY

In the experience details entry form the graduate has to give the entire details in the graduate experience form where self checking will be done and the form will be done to the experience servlet. Then he can mount the database and set the query in the graduate experience table and he will be given the unique id.

:login form :login servlet :grad login table

:grad options form

1:Give user id & pwd

2:Submit

3:Mount db

4:Set query

5:Check db

6:Accept results

7:Display message

8:Show formmismatch

GRADUATE LOGIN

In the graduate login form the graduate has to give his user id and password then his details will be submitted to login servlet. There he can mount the database and set the query where the self checking will be done and the graduate details form will be shown.

:web application

:change pwd :grad details

1:Give existing & new pwd with confirmation

2:Submit

3:Post query

4:Verify & Update db

5:Send results

6:Display results

New pwd confirmation

CHANGE PASSWORD

In the change passwd module the user has to give his email id and passwd then he has to submit to the change passwd object. Then he can set the query in the graddetails form where the verification will be done and the results will be displayed by giving the confirmation to the new passwd.

:check status form

:status servlet :applied grad

1:Check Status

2:Mount db

3:Set query

4:Process query

5:Accept Values

6:Display status

CHECK STATUS

In the check status form the graduate and the employer interact with it. This is used by the graduate and the employer to see the status. He will be seeing his status in the status servlet. He can mount the database and set the query in the applied graduate object where the query will be processed and the result will be shown in the check status form.

:apply servlet :emp requirements

:grad details :applied grad:grad options page

1:Apply

2:Mount db

3:set query

4:Process query

5:Accept details

6:set query

7:Process query

8:Accept Values

9:Failure notice

10:Insert values

11:Update db

12:Accept results

13:Display successfully applied notice

APPLY FOR AVAILABLE JOBS

In the sequence of the apply for available jobs the graduate has to give his entire details in the grad options page and he has to mount the database in the apply servlet and set the query in the emp requirement table. There he can insert the values processing of the database will be done and the result will be displayed to grad details page

:login :employer login :emp login :employer options form

1:Give id & pwd

2:Submit3:Mount db

4:Set query

5:Validate db

6:Accept values

7:Show the same form

8: Display forminvalid

valid

EMPLOYER LOGIN

First the employer has to login into company’s website. Then he has to login in the employer login form. Then he can mount the database and set the query .Validation will be done at the emp login. If it is correct the form will be displayed.

:employer options form

:post req :emp req :emp skills

1:enter requirements & check form

2:Submit

3:Mount db

4: Set query

5:Update db

6:Accept values

7:Set query8:Update db

9:Accept values

10:Display result

POST REQUIREMENTS

In the post requirements sequence diagram the employer has to give his entire details where the self validation will be done. Then the form will be submitted to the post requirements object where he can set the query in the employee skills form. Then the result will be showed to employer options form.

:generate report form

:generate report :appliedgrad :empselect

1:generatereport2:mount db

3:set query 4:process DB

5:accept values

6:set query7:process DB

8:accept values

9:display result

GENERATING REPORT

Generating the report will be done by the administrator .From the generate report form he has to mount the database and set the query in the applied grad object. There he can set the query in the emp select where the processing will be done and the report will be shown in the generate report form.