Flexiform Freestor Acoustic Tambours Revit User Guide

FREESTOR ACOUSTIC TAMBOURS

REVIT USER GUIDECompatible with Revit 2013 onwards

Version 1.0

Freestor Acoustic Tambours4 Tambour front4 Separate block for 800mm and 1000mm wide

4 Multiple finishes4 Acoustic shutters to absorb office noise

Freestor Acousitc TamboursRevit Blocks

800mm:

Cabinet-Flexiform-Freestor_

Acoustic_Tambour_1322H_

FS132208AS_13.rfa

1000mm:



FS132210AS_13.rfa

800mm:



FS111008AS_13.rfa

825mm:



FS11100825AS_13.rfa

1000mm:



FS111010AS_13.rfa

800mm:



FS120008AS_13.rfa

1000mm:



FS120010AS_13.rfa

800mm:



FS200708AS_13.rfa

1000mm:



FS200710AS_13.rfa

Loading the components into a project.

Flexiform Flexilink Racking blocks are standard family components. After downloading the file, save it locally, then load into your project using the Insert – Load Family Tab.

1. In the project folder that you are working in, go to ‘Insert Tab/ Load Family’ … Select the component from your saved location as shown below:

2. Navigate to the location of the saved Flexilink Racking folder. Select the desired family to load from appropriate folder.

Using the Flexilink Racking component families.

Flexilink Racking is a range consisting of a vast number of components. For ease of use it has been grouped into a starter and extension bay that can be used for visual reference in your model. For a specific arrangement containing product codes, please contact Flexiform Customer Services.

1. Flexilink Racking folder contains two families-‐ a starter and an extension bay. Load in both families into your project. Place a starter bay on the ground plane, type in the required width, height and depth.

2. Note-‐ Sizes available are listed in the component properties. If incorrect value is entered, an error message will appear in floor plan view.

LOADING THE COMPONENTS INTO A PROJECT

MATERIALS

Flexiform Freestor Acousitc Tambour Storage blocks are standard family components. After downloading the file, unzip contents and move it to your project folder, then load into your project using the Insert – Load Family Tab.

In the project folder that you are working in, go to ‘Insert Tab/ Load Family’… Select the component from your saved location as shown below:

Navigate to the location of the saved Flexiform Acoustic Tambour folder. Select the desired family to load from appropriate folder.

Some of the components contain manufacturer specific render materials. Revit will try and find images linked to these materials in following location on your computer:C:\LocalRVT\Flexiform

The first time you use these components, you will need to copy the materials contained in the “Materials JPEG” folder included in the download into the Flexiform file above. You may need to create the folder structure if you have not used Bimstore components with custom materials before.

Performing the above steps will allow automatic linking of custom finishes from the mentioned location.

Alternatively use the Flexiform material library (Revit 2013 upwards only) also included in the download.

General notes:When applying TambourFinish material “Flexiform-Plastic-Tambour-Shutter-Acoustic_Creamy_White-CW” the material selected for Tambour2Finish should always be “Flexiform-Plastic-Tambour-Shutter-White-WH”.

When applying TambourFinish material “Flexiform-Plastic-Tambour-Shutter-Acoustic_Silver-SL” the material selected for Tambour2Finish should always be “Flexiform-Plastic-Tambour-Shutter-Silver-SL”.

More files are available to download at www.bimstore.co.uk/flexiform For help and support please contact 01274 706206 or email [email protected]

1.

2.

BradfordFlexiform1392 Leeds RoadBradfordWest YorkshireBD3 7AE

t: 01274 706206f: 01274 665760

LondonFlexiform1st Floor45 Gee StreetLondonEC1V 3RS

t: 0207 226 9955f: 0203 301 0435

ScotlandFlexiformUnit 7 Bloom FarmMain StreetLivingston VillageWest LothianEH54 7AF

t: 01506 417410f: 01506 418970

www.flexiform.co.uk

Company Registration Number 02542123

Flexiform Freestor Acoustic Tambours Revit User Guide

Documents

Transcript of Flexiform Freestor Acoustic Tambours Revit User Guide