TAMBOUR STORAGE

FLEXIMETRIC

Unit FeaturesCarcass: 20 gauge steel outer with 20 gauge inner with integral ladder track on 12.7mm slot centresLevelling: Floor Levelling feet suppliedShutter: Vertical Plastic tambour shutter with finger grip handle.Locking: Mid Height Lock located in RH side panel

Standard Unit DimensionsHeights: 1215mm, 1600mm, 1930mm or 2200mmWidths: 800mm, 1000mm, 1200mm (1200mm only on 1215mm and 1600mm high cabinets)Depth: 500mm

Shallow Unit DimensionsHeights: 1350mm, 1400mm, 1900mm, 2200mmWidths: 800mm or 1000mmDepth: 300mm

ComponentsPlain shelf, shallow drawer, lockable document unit, universal lateral rail, universal pull out frame, coat shelf, slide lock blocks to be in conjunction with pull out fitments DeliverySupplied ready assembled, knocked down version available.

Tested ToBS EN 14073-2:2004, BS EN 14073-3:2004, BS EN14074:2004.

www.flexiform.co.uk

MaterialsMFC Top Panel: 25mm melamine faced chipboard (M.F.C) with 2mm ABS matching edging. British standard 476 class 1 surface spread of flame. Meets E1 European standards on Formladehyde emissions. Steel: Powder coated steel with minimum paint coverage thickness of 35 Microns. Indentation, cross cut+adhesion and bend tested. FinishesStandard Flexiform finishes. Additional colour options available (may incur an upcharge).

MFC: Light Oak (MOK), White (WHM), Beech (MOB), Maple (MOM), Grey (MOG), Walnut (MOW), Romano Cherry (RCM).

Steel: RAL 9006 Silver (JOS), RAL 7024 Graphite (GGS), RAL 7035 Pale Grey (PGS) and RAL9016 White (JWS).

Recyclable Content94% recyclable.

Warranty15 years from installation.

Fleximetric Storage

Standard FleximetricUnit

Standard FleximetricUnit Open Unit

Shallow FleximetricUnit

Shallow FleximetricUnit Open Unit