7/30/2019 Winter detailing
1/20
Detailing WorldWinter Detailing
-Mat-1
7/30/2019 Winter detailing
2/20
Detailing WorldWinter Detailing
-Mat-2
Contents
Subject Page
INTRODUCTION 3
Why the fuss? 3
Prevention is better than the cure! 3
LOOKING AFTER YOURSELF
General Welfare 3
Clothing 3
Hats & Gloves 4
Finally 5
DETAILING IN THE WINTER 5
Concerns & Issus 5
Washing Hints & Tips 5
Touchless Washing 7Environmentally Friendly Washing 7
Watch Those Wheels 8
PROTECTION IS KEY 9LSP Advice 9Decontamination 9Time To Protect 10Wheels, Arches & Suspension 10Underbody & Chassis 10
WINTER DETAILING PRODUCTS & STORAGE 11
What Do I Use 11Storage 11
DE-ICING 12
Which Method 12
Aerosol De-Icers 12
Ice Scrapers 13
Water 13
Other Methods 13
So Then 14
CAR MAINTENANCE 14
Stay Safe 14Essential Winter Checks 14
General Car Safety 15
Take Precautions 15
Winter Necessities 15
RECOMMENDED PRODUCTS 16Paste Waxes 16Sealants 17Under-Body Protection 18
ACKNOWLEDGEMENTS 20
7/30/2019 Winter detailing
3/20
Detailing WorldWinter Detailing
-Mat-3
Winter Detailingby -Mat-
INTRODUCTION
Why the fuss?
So, why all of the fuss about winter detailing? Every year like clockwork, detailers, enthusiasts and
hobbyists all start to worry about how best to protect their car but why? Well, we recognise that our
car is one of the most expensive items we may purchase, and we take pride and joy in keeping up its
appearance.
The harsh conditions that the winter weather brings can have a serious effect on our cars, both short
term and long term. In the short term, we have to deal with frozen windows, frozen door shuts/seals,
grit & salt on our paintwork. In the long run, the salt & grit used to keep us safer on the roads, has anegative impact on the cars chassis and other components, by causing rust. This can lead to costly
repair bills, unsightly surface rust and even MOT failure. Theres also the long term effect of washing
during the winter, in the form of swirl marks and random scratches.
Prevention is better than the cure!
We now know why we worry about the winter weather coming, but what can we do about it? Well, as
the saying goes, prevention is better than the cure. Im not going to claim theres a miracle must
have product that will 100% prevent rust, or prevent getting swirl marks in the paintwork. However,
with the right knowledge we can take measures to delay the onset of rust and swirl marks, and treatthem should they occur. So let us take a look at what we can do.
LOOKING AFTER YOURSELF
General Welfare
Before we start to take care of our car, we need to make sure we take care of ourselves. The last
thing you want is an injury. So before starting any work on your car, assess the situation. Take into
account the current weather conditions, and your working environment.
Keeping warm is essential when detailing in cold conditions. Cold muscle can be damaged very
easily, which could mean an early end to your day, and even time off work. Before we begin, we need
to make sure were wrapped up warm.
Clothing
Layering up is an easy way to keeping warm, however, it can restrict movement. The key is to wear
light and flexible clothing that is also warm and water proof. Long underwear, typically called Long
Johns or Thermal Underwear are great as a first layer. These are usually made from cotton, and
7/30/2019 Winter detailing
4/20
Detailing WorldWinter Detailing
-Mat-4
blended with wool (usually Merino), some can be 100% wool. These are designed to keep you well
insulated, and as warm as possible
Your next layer should be a set of lightweight waterproofs. Ski clothing is ok for keeping you dry, even
motorcycle clothing would be ok. I recommend anything made from Gore-Tex material. Whilst most
waterproof clothing keeps you dry, it doesnt allow your skin to breath, this is where Gore-Tex clothing
has the edge. Not only do you stay dry, but your body is also able to breath, thus reducing sweating.
Cross section of Gore-Tex material
Image Source: Wikipedia
Hats & Gloves
Now were wrapped up warm, we need to think about parts of us that are exposed the most. That
would be our hands and our head. You may have read reports saying that we lose 40%-75% of ourbody heat through our heads. There are other reports dismissing this as being a myth. Regardless of
how true this is, it is a fact that any exposed part of our body will lose heat. So we need to keep as
much of our body covered as we can.
Starting with the head, lets talk about woolly hats.Dont worry; you dont have to look like the douche
from N-Dubz to stay warm. I personally will wear any kind of beanie hat, and I like to make sure my
ears are covered. These do offer protection for your head, but can hold dampness in. What you need
in a Thinsulate hat (made by our friends at 3M), or a Trapper Hat.
Fleece Trapper Hat Thinsulate Snow Hat Fur Trapper Hat
Image Source: www.woolyhats.com
A Thinsulate hat works similar to the Gore-Tex clothing. They are designed to let your body breath
and let sweat escape, whilst at the same time keeping your head dry and warm. Make sure you get
one big enough to pull over your ears. The Trapper hat uses fur or fleece to keep you warm. Like the
Long Johns that use wool, these use other materials to keep heat in. They also have side flaps to
cover your ears, and tie under your chin, very useful if it becomes very windy.
7/30/2019 Winter detailing
5/20
Detailing WorldWinter Detailing
-Mat-5
Now to protect your most important tools, your hands. You may already wear latex gloves when
detailing, these are great for keeping your hands protected from chemicals, but dont offer much in
terms of warmth. What you need is a good quality pair of waterproof gloves. A highly recommended
brand by detailers is SealSkinz. I would also suggest purchasing a pair of Thinsulate gloves to wear
underneath. Combining the two together will give you the best of both worlds. Thinsulate will keep
your hands nice and warm, whilst the SealSkinz gloves will do a great job of keeping you dry.
Thinsulate Thermal Gloves SealSkinz All Season Gloves
Image Source: Amazon Image Source: Specialist Socks.co.uk
When washing the car, make sure the cuffs are a tight fit to your wrist to prevent water getting under
the gloves (but not too tight to restrict circulation). If theyre not, it may be a worthwhile idea to wear
some big long rubber gloves for the wash process (the type used for washing the pots). Its also a
good idea to make sure the water you are using to wash is nice and warm. Cold water will quickly
draw heat away from your hands/wrists/arms.
Finally
One final part to remember is shoes and socks. Keep your feet dry. If you need to, carry an extra pair
of socks if youre detailing away from home. Also, make sure your shoes/boots/trainers are waterproof
and provide plenty of grip. Remember, all that water you are using may turn into sheet ice.
Well, I think that just about covers everything on your own well-being. Just a few simple steps will
keep you safe and warm. Oh, and a final thought, if youre detailing away from home, make sure you
take a nice warm flask of tea/coffee/Bovril/soup etc. Just to keep you warm on the inside.
DETAILING IN THE WINTER
Concerns & Issus
What are the concerns and issues around detailing during the colder months? Well, if youve read the
introduction, you will now understand whywe want/need to detail, yet theres always a panic as to
what products we should use, what wash technique and what methods for applying LSPs. Hopefully
this section will cover all of your concerns.
Washing Hints & Tips
Winter detailing is essentially the same as detailing any other time of the year. The only difference is
the amount of dirt you will find on your car, and the type of dirt that is. What we need to do is take alittle more time, and a little more caution when cleaning our cars. The usual process of rinse, foam,
7/30/2019 Winter detailing
6/20
Detailing WorldWinter Detailing
-Mat-6
and two bucket method wash still apply, we just need to use a little more caution.
Snow Foam Bath Thorough Rinse 2 Bucket Method Wash
Image Source: -Mat-
Ok, so for this part of the guide I will assume you are pretty adept when it comes to washing a carsafely and using the 2 Bucket Method (2BM).
To begin with, you need to give the car a thorough rinse down to remove any loose surface dirt,grime, grit and salt. For this, a pressure washer would be ideal or a garden hose on a fairly strongsetting (not a jet stream, but more than a light spray). Remember to give the wheels and arches avery thorough rinse. This is where most of the salt and grime will be collected. Also try to get underthe body and sills. You can purchase an under body lance attachment for this, or possibly use agarden sprinkler, and drive the car back and forth over it.
After giving the car a thorough rinse down, its time to begin the wash stage. However, were still notready to touch the paintwork yet. The key to a good, safe winter wash is to touch the paint as little aspossible. So the next stage is to give the car a through snow foam. I would suggest doing this twice. Ifthis isnt an option, then you can get a hosepipe attachment that does a similar job. Alternatively, youcan give the car a pre-soak with some All Purpose Cleaner (APC), usually diluted to around 10:1depending on the brand you use. After you have left the foam/APC to do its work, give the car anotherthorough rinse. We are now ready for the wash stage.
2 Bucket Method Wash Merino Lambswool Mitt Ultra Plush Drying Towel
Image Source: -Mat-
The most important stage of any winter detail is the wash stage. This is where swirls, scratches andother defects can be inflicted. The key here is to use a good quality car shampoo to help lift andlubricate the dirt, and also a good quality, clean, lambswool mitt. As said, this guide assumes youalready know how to wash a car safely with the 2BM. Essentially what you need to remember, is towash less in one pass than you normally would and visit the rinse bucket more often. So if youwould usually wash half the roof, and then rinse the mitt, try just washing a quarter, and then rinsing.
You will also need to keep an eye on your rinse water. Whether or not you use grit guards, the waterwill become dirtier, quicker. So dont be scared of changing the water for fresh water every now andthen.
Finally onto drying the paintwork. Using an open ended hose, try to sheet off as much water aspossible. This will ensure that you will have to touch the car less in order to dry it. When you do dry
the car, use a super absorbent microfiber drying towel, and pat the car dry. Do not rub the car. Patdrying will soak up any water, without risking any damage caused by any possible remaining grit.
7/30/2019 Winter detailing
7/20
Detailing WorldWinter Detailing
-Mat-7
Touchless Washing
During the winter months, my personal wash method is to wash the car as little as possible well, atleast the paintwork anyway. Providing your car has a good coat of wax/sealant, there is nothing wrongwith letting dirt sit on the paintwork. My own personal winter wash method includes a rinse downpossibly every 1-2 weeks, followed by a wash using the process above, every 3
rdweek or so.
Snow Foam Bath
Image Source: -Mat-
As we know at this time of the year the days are shorter, and we have less light to work with. This isoften why people are unable to wash their car after work. So a quick pressure wash down, followed bya foam/APC coating, and another rinse, it usually enough to keep the dirt at bay. After you have givenyour car a touchless wash, remember to rinse well with an open ended host to sheet off as muchwater as possible.
Environmentally Friendly Washing
No you dont have to wear tie-die, make love beads, and say peace to everyone to use this method.Environmentally Friendly Washing (or EFW for short) is a quick way of washing your car. It also usesfewer chemicals, less water and is lighter on the pocket, so its an all-round winner. The only tools youwill need are; a bottle of ONR (Optimum No Rinse), 1 Bucket (Grit Guard optional), a wash sponge ormicrofibre, a microfibre to dry with, and about 5L of water. As an additional extra, some people makeup a bottle of ONR solution in a spray bottle.
As this topic doesnt seem to be covered as much, well spend a bit of time looking into how exactlyyou wash using ONR. Now Im no expert on EFW, and I have never used ONR, so heres someinformation provide from Detailing World member Lowiepete (Steve).
The biggest hurdle to overcome with winter s ONR is salt, and this is where the biggest judgement
calls need to be made. ONR is really designed for the balmy hills of California, rather than for use onUK roads. Nevertheless, it is possible to adapt it successfully for winter washing here.
The biggest "leap of faith" is in believing in the technology that this product brings. How can such athin liquid hold all the muck in suspension and not inflict swirls? As many will testify, it just does! So,the next stage is to put the product on the car and allow time for it to do its work. A small garden spraybottle with ONR diluted at between 30 and 40 to 1 is your starting point.
Spray one panel at a time and leave it to dwell. The way to test it is to apply another spray - if there isdirt movement, and then it's ready. As stated, the biggest judgement call is salt - don't try and beat thelaws of physics, you will need sufficient water to completely dilute it to a "scratch-free" liquid. Usingjust 1 capful of ONR in a half-filled bucket of warm water, initially drop the mixture from a few inchesabove, using a reasonably filled grouting sponge over as wide an area of the panel as you can, again
leaving a few moments before the sponge touches the paint. Then, as gently as you can, wipe thepaintwork to rid it of the salt. When the sponge goes back in the bucket, give it a good agitation to free
7/30/2019 Winter detailing
8/20
Detailing WorldWinter Detailing
-Mat-8
out the muck. It will fall safely to the bottom. It's a case of not being in a rush. Replenishing the half-bucket is another judgement call only you can make. I'd _not_ cut the corner and use full buckets,especially with heavy salting!
In position and ready to start After 1 pass The roof completed
Image Source: Lowiepete (Detailing World Member)
In the summer, you'd normally attempt to dry the panel, before going to the next. Remember, ONR is"no rinse" and attempting to dry the car at this stage is not necessary and there's an increased risk ofmarring. However, if you're intending to apply some QD protection, then the next stage is to spray
ONR from the garden sprayer once more and then gently wipe the panel dry with a microfibre cloth,turning the cloth regularly. With ONR, I'd recommend folding the cloth into 4 and then always use thefolded side as the leading edge. At no time is there any rubbing involved! The paint will be ready for aQD.
Many thanks to Steve for providing that information. Remember, during the winter months your carwill collect a whole lot more dirt. So keep an eye on your wash sponge/MF and rinse it well. Thismethod also allows for those quick washes after work when you dont have the time to get thePressure Washer out.
Watch Those Wheels
Ok, so weve covered the bodywork, but what about your wheels? For most car enthusiasts a nice setof alloys really makes the car stand out from the crowd. Even at the best of times, we have to contendwith tar, brake dust and industrial fallout damaging our wheels. With the onset of bad weather, wealso have the added presence of grit and salt to make matters worse. This can speed up thecorroding process of the alloys!
Keep those wheels clean
Image Source: -Mat-
With that in mind, make sure you wash your wheels at least once a week. Even if you dont wash thecar itself, it only takes 5 minutes. Just do your best to get as much brake dust, grit and salt off thewheels. If you have protected your wheels before the winter period, this should be an easymaintenance job.
Whilst cleaning the wheels, its important to check the arches, brakes and suspension. Some arches
can be prone to rust, and if grit and salt gets trapped between the arch and plastic lining, this mayspeed up the process. The same applies for the suspension, brakes and steering mechanism. With
7/30/2019 Winter detailing
9/20
Detailing WorldWinter Detailing
-Mat-9
this in mind, it would be a good idea to try and rinse these areas thoroughly at least once a month. Ifneeds be, jack up the car slightly, just enough to get under the arch.
PROTECTION IS KEY
LSP Advice
Last step product. Ok, so were not strictly talking about wax and sealants in this section, but more soabout protection in general. Protection for the paintwork, undercarriage, wheels, arches, etc.Protection is vital to keeping our cars looking its best, keeping the rust at bay, and also makingmaintenance washes much easier.
Before the winter weather sets in, its highly recommended that you have a good detailing session onyour car (or pay a professional to do it for you). Well assume that you are going to protect the caryourself for the purpose of this article.
Decontamination
Your usual wash/detail method should be sufficient for a winter detail, but as with the washingmaintenance, you may need to alter/tweak a few aspects. Firstly you need to ensure the car has beenthoroughly cleaned (including the wheels). The next step would be to ensure all surface contaminantshave been removed. Again, your usual process should suffice, but just as a quick reference, heres aguide of what should be done.
De-tarring in action Clay process Clay after decontamination
Image Source: -Mat-
First up is the wash process, following the guide above should see you through that. Once you have
completed your wash routine, its time to fully decontaminate the car. The next stage is usually toremove any tar and bug deposits, followed by a thorough rinse. Once this has been done, you can goahead and clay the car, before one final rinse and dried.
Now all clean and dry, it would be worthwhile at this stage to cleanse the paintwork. There are acouple of options available at this stage; a full machine correction, a light correction with a finishingpad (by hand or machine), or a paint cleansing option. At the very minimum I would recommend thatyou cleanse the paint with something like Dodo Juice Lime Prime or Swissvax Cleaner Fluid.
7/30/2019 Winter detailing
10/20
Detailing WorldWinter Detailing
-Mat-10
Time To Protect
Now the paintwork is perfectly clean, its time to apply your chosen wax and/or sealant. The key toapplying a wax during this time of year is to allow a bit longer than usual for the wax to cure. Also,apply it thinner than you may normally apply it. I would also suggest applying 2 or 3 layers to ensureeven coverage.
I would like to take a quote from a post by Gordon (AKA, Caledonia on Detailing World) in which hegives advice for applying wax in cold conditions.
Temperature is only one fact. It is more to do with humidity and mainly dew point. This iswhen microscopic particles of water form on horizontal panels on your car. Roof, bonnet andboot if you have one. As you already know wax due to its oily nature will not adhere to water.So this is when you get premature failure of the wax layer. It can also affect sealants too.Dependant on there make up. Caledonia, Detailing World, 19/10/10
So, with that in mind, try to wax indoors. However, this isnt an option to everyone, so if you do needto apply wax/sealant, then try to do so around mid-day which is likely to be the warmest part of any
day during the winter.
Wheels, Arches & Suspension
Its not only our paintwork that needs protecting in the winter, but also are wheels, and other vitalparts. As with protecting the paintwork, preparation is key. So just like the paintwork, you will need tothoroughly clean your wheels, arches and even your brakes & suspension. Using the advice above,you should get these parts as clean as you can. If needs be, spend a day just on this area of the car,and even take the wheels of if required.
There are plenty of choices on the market for wheels sealants to protect from brake dust, salt, grit andtar. My personally preference is Poorboys Wheel Sealant; however, OptiSeal is also a good choice forwheels. Your arches and suspension can be waxed with the same stuff you use on your paintwork.
Underbody & Chassis
Now on to the hard to reach parts of the car. The cars underbody and chassis that it is built aroundis quite possibly the most vital part of your car. The entire underside of the car is exposed to theelements more than any other area. And with the amount of steal and unprotected paint there is, rustis inevitable. Any corrosion caused here could lead to expensive MOT repairs and maybe even theend of your pride and joy.
Some professional detailers or garages will offer an underbody protection service. However, if youfancy taking on the challenge yourself, then take care. You will need to get the car off the ground soyou can get access underneath. A hydraulic lift would be ideal, failing that get your car onto someramps or axle stands. Ensure that the car is on a flat, level surface before lifting off the ground.
Once the underside is accessible, clean off any surface rust and dirt that you can see. There is nopoint protecting a dirty chassis. A wire brush would be handy to remove any surface rust, whilst astrong mix of APC and/or degreaser can be used to remove and dirt and grime. Once everything isclean to your liking, thoroughly dry everything. Then its time to apply your protection of choice.
7/30/2019 Winter detailing
11/20
Detailing WorldWinter Detailing
-Mat-11
WINTER DETAILING PRODUCTS & STORAGE
What Do I Use
When it comes to product choice, there is no right or wrong answer. Most of the time it is down topersonal preference. However, when picking what wax/sealant you wish to use/purchase, it would bewise to consider ease of application, curing times and durability. For a winter protection, you wouldwant something that goes on quick and easy, and will see out the winter months. I will list a selectionof products at the end of this article that have been recommended by professional and enthusiasticdetailers alike.
Storage
Again, there seems to be confusion every year as to how we should store our products in the coldermonths. The general consensus amongst detailers is to bring as much as possible into the house andkeep it warm. However, with a few precautions, you should be fine with storing them in your
shed/garage as usual.
If youre using a traditional garden type shed for your storage area, then ensure that it is wellinsulated. You can either insulate the entire shed, or place your products in a box, and wrap yourmicrofibers etc around them to keep them warm. The same would apply if you use a garage and thetemperature gets cold in there.
Having emailed several manufacturers regarding product storage, the general feedback given was to
not let products freeze; however, if they do freeze then usually they are fine once thawed. Here are a
couple of quotes from the many emails I received.
I did an experiment last winter by freezing a bottle of RG Clearmist Detailer (left it in for about
3 days!) and its performed perfectly.
In general terms, waxes should be kept cold but not freeze, so I suggest bringing them inside
if its a shed/very cold garage and from a potential theft viewpoint, best to have the pricier
stuff safer indoors. I cant be specific on other stuff, but a general rule of thumb is that
freezing is not a good idea but cold shouldnt affect most products. Mark Wibberley @ More ThanPolish
----------
Our water based products (NanoWax, Premium Textile & Leather, Shampoo) should not
freeze in any case, they are very likely damaged if they do.
The solvent based products (basically the rest of all products) should be stored in an
environment that is as temperature-stable as possible. If temps drop below 0C it wont
damage them and they wont freeze but large temperature differences can make the products
unstable (in general, the water based ones as well). Florian Kessler @ Nano SurfaceSolutions
----------
There is a simple rule of thumb. If its a water based product, ie you can dilute it with water,like a shampoo, polish or water based cleaner wax/AIO then you are going to get it freezing at0 degrees. Waxes and other solvent based products will have much more impressive freezingpoints. Dom Colbeck @ Dodo Juice
7/30/2019 Winter detailing
12/20
Detailing WorldWinter Detailing
-Mat-12
So, with that in mind, its a good idea to protect any water based products. Whether you bring themindoors, or wrap them up warm in your usual storage area is your choice. From personal experience, Ihave seen Meguiars Next Generation Shampoo split and I left it next to the radiator for a few daysuntil it mixed back together.
Another cause for concern is pressure washers. Some brands of pressure washers suffer from
cracked water pumps. This is usually due to water being left in the machine, and then freezing. Whenwater freezes it expands, which will put strain on the pump, hence the cracking. So before puttingaware your pressure washer, ensure you have fully drained all the water from it, the same applies toyour hose pipe, the last thing you want is a frozen hose, which may also split. Finally, before puttingthe pressure washer away, wrap it up in an old blanket or carpet/rug again, this will help keep thecold out, and protect the pump.
DE-ICING
Which Method
There are several options when it comes to de-icing your car in the morning. From switching on the
heaters, and letting the engine do the work to using aerosol de-icers. Lets take a look at the options
available, and which will suit you the best.
Ice Scraper with Squeegee Jug of Water Aerosol De-Icer
Image Source: Halfords
Aerosol De-Icers
Ok, so every year there are numerous threads about the best way to de-ice the car. One subject that
always crops up is de-icers and we are always told that these are bad for our paintwork but why?
No-one ever seems to give a good reason as to why we shouldnt use de-icers.
Well, let us take a look at the main ingredients of a typical de-icer; butane (
7/30/2019 Winter detailing
13/20
7/30/2019 Winter detailing
14/20
Detailing WorldWinter Detailing
-Mat-14
So Then
So weve looked at the most common de-icing methods. Which you choose to use is your choice. Mypersonal advice would be to use cold water. This de-ices the windows, and wont strip any wax
protection. You could also have the engine running whilst doing this, so by the time you have finished,the heaters will be up to temperature, without excessive use of the engine.
CAR MAINTENANCE
Stay Safe
Whilst driving safe sounds like something we should be doing regardless of weather, time of the yearetc, it is easy to forget how a change in conditions can affect your driving. Remember, during thewinter months keep a bigger gap from the car in front. This gives you a greater field of vision, andallows more time for braking in sudden emergencies. Also, keep an eye on vital aspects of your car.Brakes, tyres, wiper blades are all very important during these harsh months.
Essential Winter Checks
The colder weather that comes with the winter months puts a lot of strain and demand on your car,particularly on the engine and tyres. Before the weather becomes too severe, it is advisable to checkyour cars vital fluids and tyres. Most modern day cars have a dedicated coolant tank for your radiator,check that this is topped up with the recommended fluid, and to the appropriate levels (check you carshandbook for information.
Other things to check include your wiper blades and washer fluid levels. A smeared windscreen is thelast thing you want when visibility is bad enough. Smears are usually caused by worn wipers, so getthese checked, and replaced if needs be. Remember to check the washer fluid level. Windscreensget dirtier, quicker in the winter months, and the last thing you want to do is run out of any cleaningfluid.
Checking tyre tread depth Check those wiper blades Keep your oil topped up
Image Source: About.com
Finally, check your tyres. These are the only four things that keep your car on the road! Check thetread depth, and also the pressures (consult your manual for pressure ratings). The legal minimumlimit for tyre tread depth is 1.6mm, this isnt much at all. In fact, studies suggest that anything below3mm sufficiently reduces grip and stopping distance.
7/30/2019 Winter detailing
15/20
Detailing WorldWinter Detailing
-Mat-15
General Car Safety
Whilst this may not be winter specific, its always a good idea to check other things on your carbefore winter sets in. Check your oil levels, this will help your engine run smoother and last longer, itgives you the opportunity to diagnose any potential problems before things get worse. It is also agood idea to check your brakes. Its all well and good having tyres that meet requirements, and to grip
in corners, but what about slowing down, and stopping? If youre unsure how to check these, yourlocal garage will usually give you a free inspection.
Take Precautions
So, what can we do to try to make our lives easier? Well, the first easy thing it to leave your wiperblades up, and off the windscreen for the night. This will prevent the blades freezing to the window,and help them last longer in turn. Its also wise to allow extra time for your journey, keep up-to-datewith traffic news by turning on your local radio station. One other tip is to assume all other drivers areidiots. Therefore you will be ready to expect anything. Not every driver on the road may be as
confident as you are, so give them time and space. Dont rush anyone, and keep your distance fromthe vehicle in front.
Winter Necessities
Not exactly car maintenance, but a bit of general advice next. At some point during the winter youmay need to visit out of town friends/family, or take an extra-long journey. You never know what mighthappen once on the open roads. Now Im not going to say make sure you have a pair of skies withyou, and a knowledge of how to build a shelter using nothing other than snow and a plastic fork, butthere are a few things you should have with you at all times.
A few things to carry in your car at all times during the colder months should be, a blanket, a torch(wind up one are great as no chance of batteries running out), a mobile phone (and a car charger ifyou have one) and your information for your breakdown company. Should the worse happen whilst onthe road, at least you have a blanket to keep you warm and a phone to contact someone for help. Itmight also be worthwhile to carry a hot flask of water, and a pot of tea/coffee to keep you toasty andwarm whilst you wait for help to arrive.
7/30/2019 Winter detailing
16/20
Detailing WorldWinter Detailing
-Mat-16
RECOMMENDED PRODUCTS
PASTE WAXES
Collinite 476s
Without doubt Collinite 476 is the most durable car wax wehave come across. It doesn't smell great but once you see justhow good the results are and how easy to apply you willforgive it that. Buffing of is also childs play and the results lookabsolutely stunning. It adds depth to solid colours whilst notmuting the flake on metallics.
Super Double coat paste wax #476 is a Carnauba based waxpackaged in a tin that looks like it belongs in the 50's. Don't letthat fool you though this is one of the finest waxes on the
market. It is a true paste wax and contains absolutely nocleaners so by applying multiple thin layers you leave a finish
which is more durable than not just any wax, but just about any sealant on the market.
Infact Collinite #476 is so durable that the manufacture claims one application will last a full 12months come rain, snow and sun! This is the it's true forte. Somehow Collinite has managed tomanufacture a wax so extremely durable it becomes the ideal choice all year round protection. All thismakes Super DoubleCoat #476s a very popular choice for winter, throwing off the worst weather withease. Source (text & image): Clean Your Car
FinishKare 1000p
Developed from a West German process called SynthesisFinishKare 1000P is a blend of advanced pure syntheticmaterials.
The result is a paste wax characterized by melting temps. of250+ degrees, extreme hardness, extreme slickness, highgloss, and intensive wear without the quality fluctuations foundin natural waxes.
FinishKare 1000P delivers heavy duty resistance to UV, hard
water, acid rain, bug spatter, tree sap etc while creating acustomer appearance. Excellent for use on all automotivepaint, gel coat and metal surfaces includingcritical aircraft surfaces. Source (text & image): Clean Your Car
7/30/2019 Winter detailing
17/20
Detailing WorldWinter Detailing
-Mat-17
Meguiars #16 Paste Wax
Meguiars never produce anything that is less than ordinaryand #16 Paste Wax follows that tradition. Using an exoticblend of waxes, this is a pure wax that contains no cleaners orabrasives.
Suitable for all paint finishes including clear coats. It leaves areally wet glossy coat, with absolutely insane beading!
As with all waxes, apply thin coats a panel at a time. Source(text & image): Clean Your Car
Collinite Insulator Wax (845)
Collinite Insulator Wax (845) is a heavy duty liquid wax that was originally designed for
industrial use, but its usage and performance characteristics also make it ideal forautomotive use in situations where ease of use and durability are paramount, such as
fleet maintenance for example. Like other Collinite products, it is very easy to apply and
contains no cleaners or abrasives of any kind, meaning that it can be easily layered. If
you are looking for a highly durable, time saving car wax then Collinite Insulator Wax
(845) ticks all the right boxes. Source (text & image): Polished Bliss
SEALANTS
Zaino Z-8
Z-8 Grand Finale Spray Seal utilizes twenty-five new
ingredients to bring you the highest level of shine, the deepest
depths of gloss, the slickest feel, and the most protection
available in any detail spray, period. But keep in mind, Z-8 isn't
for everyone, and it hasn't been designed for everyday use. It's
for those special occasions and extreme instances when you
need extra performance from the Zaino Show Car Polish
System.
If you're ready to take your paint to the next level and treat
your eyes to the richest, most detailed paint they've ever seen,
order a bottle of Z-8 Grand FinaleSpray Seal and prepare to be impressed.
Z-8 Grand Finale Spray Seal:
Leaves a high gloss, high shine, deep, rich, wet finish thanks to advanced optical-clarifying
polymers
Leaves an ultra-slick finish that repels dust, dirt, environmental fallout and other stains Locks in the improved looks and protection for weeks - not days
7/30/2019 Winter detailing
18/20
Detailing WorldWinter Detailing
-Mat-18
Contains anti-UV agents to protect your vehicle's finish against damaging sun rays
Is easy to use: wipe on, wipe off
Should be used in conjunction with the Zaino Show Car Polish System, including Z-2 PRO, Z-
3 or Z-5Source (text & image): Zaino Europe
Werkstat Acrylic Jett Trigger
Werkstat Acrylic Jett Trigger extends the durability of the protective coat of
polyethylene-acrylic nano-scale polymers laid down by Werkstat Prime Acrylic and
builds an ever smoother, more uniformly reflective finish. Because it contains no
cleaning agents whatsoever, Werkstat Acrylic Jett Trigger is well suited to being
layered many times, as each fresh application will not strip or degrade the existing
elastic sealing layer. As a result, Werkstat Acrylic Jett Trigger further improves
resistance to environmental factors, such as heat, acid and ultraviolet radiation, and
mechanical damage, such as wash-induced marring and scratching. In addition to its
generous protective qualities, the resulting ultra-smooth coating ensures that low-angle
incident light is brilliantly reflected to produce mirror-like images, while the high
refractive index of the polymers allows high-angle light to refract into the finish and
improve flake pop. In fact, the light transmittance of the coating laid down by Werkstat Acrylic Jett
Trigger actually exceeds that of optical glass, thus ensuring that the beauty of your paint will stand out
with unobstructed clarity. As the most durable product in the Werkstat line, Acrylic Jett Trigger is ideal
for daily drivers that experience higher than average exposure to the elements, and for this reason is
absolutely ideal for winter use too. Source (text & image): Polished Bliss
UNDER-BODY PROTECTION
Waxoyl
WaxoylRust Proofing prolongs your vehicles life by protecting against rust and
damp.
Features and Benefits:
Kills old rust
Prevents new rust
Spray inside doors, panels, box sections and other internal structures
Forms flexible, weather-proof skin
Doesn't crack, dry out or wash off
Use with Waxoyl High Pressure Sprayer Source (text & image): Halfords
Bilt Hamber Dynax Under Body
Dynax UB is a high-performance anti-corrosion wax that provides exceptionally long lasting
protection to steel surfaces. Dynax UB contains elastic polymers that create a tougher wax coatingthat is more resistant to abrasion than normal wax coatings - this property enables this wax to protect
7/30/2019 Winter detailing
19/20
Detailing WorldWinter Detailing
-Mat-19
vehicle undersides for prolonged periods and unlike traditionalbitumen underseals Dynax UB will not peel.
Dynax UB when dry, has the consistency and feel of soft rubber, butis intelligently formulated to expand and contract and as such, isperfect for use on cars which get put away in garages at the end of
the day or are used all year long.
It dries to a tough matt black finish and is ideal for application to allunprotected road facing areas of the underside of the car or forareas which need to resist damage from grit/stones etc. In salt-spraytrials (to ASTM B117 conditions) Dynax UB substantiallyoutperforms competitive materials.
Dynax UB may be applied to another coating of UB, a wide range of painted/coated surfaces or tobare steel. It is not designed to be painted over. Source (text & image): Rubbish Boys Carnauba Wax Shop
7/30/2019 Winter detailing
20/20
Detailing WorldWinter Detailing
Mat
ACKNOWLEDGEMENTS
Special thanks to:
Wikipedia
Woolyhats.co.uk Amazon
Specialistsocks.co.uk
Halfords
About.com
For the use of their images.
I would also like to acknowledge the following for their use of images and product descriptions:
Clean Your Car Halfords
Rubbish Boys Carnauba Wax Shop
Zaino Europe
Polished Bliss
And finally, an extra special thanks to the members of Detailing World. Without some of the posts on
there this article would have not been possible. Also a shout to Gordon (Caledonia) for his post on
applying wax which I have quoted in this article. A thank you to Steve (Lowiepete) for his input in how
And a thank you to all the manufacturers for theirto wash using ONR during the winter months.
advice on product storage. Particularly to the following, as I have quoted your emails directly:
Mark Wibberley (More Than Polish)
Florian Kessler (Nano Surface Solutions)
Dom Colbeck (Dodo Juice)
And thank you to all the other manufacturers who replied
Thanks to you all.
Top Related