The Industry Resource Center «Space Vehicles and Systems» FSBEI of HPE «Siberian State Aerospace...

The Industry Resource Center «Space Vehicles and Systems»

FSBEI of HPE «Siberian State Aerospace University named after academician M.F. Reshetnev»

Krasnoyarsk Semafornaya St., 433/1 [email protected] www.rckas.pro

RESOURCE CENTER «SPACE VEHICLES AND SYSTEMS» SIBSAU


WORKSHOP

• manufacturing (processing) of solids of revolution with a diameter up to 200 mm and a length up to 700 mm on lathe tools;

• manufacturing (processing) of devices with a size of up to 800х360х300 mm on milling machines using programmed turning table (4 coordinate positions);

• development of control software on the base of models designed in CAD/CAM systems for lathe tools and milling machines.


WORKSHOP

• water jet cutting of various materials;

• preparing of components for assembly;

• testing of assembly steps;

• assembly, engineering development;

• preparing of a blank for further processing;

• assembly of products after mechanical processing

• identification, manufacture of product packaging;

• transportation and product delivery to a customer.


COMPOSITE MATERIALS LABORATORY

•analysis of actual properties of polymer composites and creation of database of composite materials’ actual properties;

•creation of information infrastructure for the research findings’ application;

•development of technical processes for the manufacture of complicated constructions made from polymer composite materials;

•development of technical operations in the process of precision products’ manufacture;

•development of contemporary remote-sensing methods of control for the polymerization process.


OUTPUT SCIENTIFIC AND TECHNICAL PRODUCTS

Press mold Gear wheel

Mass-size evaluation model


Radome

Evaluating measuring transmission loss of super-high frequency energy

on a frequency of 8-15 GHz0,15 dB

Height 600 mm

Diameter 1345 mm

Reflector made from carbon composite, fiberglass plastic

and aramid materials

Weight Is 30-40 % lighter than aluminum

Accuracy Maximum mean square deviation is 0, 05 mm



Transport basket of space vehicle «Cosmos-CX»

Canting device for transport basket Tire jack for space vehicle «Cosmos-CX»



Manufacture of mass-size evaluation models of the base station

Manufacture of a bushing plate

Mass-size evaluation models for space vehicle «Express-AM5»



Manufacture of tools for the assembly of a skirt for the device

«KБK» and manufacture of a press mold for a basecoat component



Mobile transformable parabolic antenna designed for operation in satellite communication terminal Ku band (VSAT - Very Small Aperture Terminal)

Name Value

Aperture diameter 1,3 m

Navigation rangeAzimuth ±180°;

Elevation angle 0…90°

Polarization twisting ±95°

Setup time 10 min max

Number of packages for transportation

1 piece

Package size 800 mm х 500 mm х 200 mm

Maximum wind force Wind speed up to 20 m/s

Environment temperature from ˗45 to +60 °C

Antenna mass ~ 16 kg

Operating band Reception Transmission

Design factor of multiplication

~ 41,2 dB ~ 42,9 dB

Signal polarizationlinear, orthogonal

polarization to transit channel

linear, orthogonal polarization to

reception channel

Electrical characteristics

Technical characteristics


Model of the platform of space vehicle «Express-AM5»

for experimental development of the onboard cable system’s assembly


03-КИ Model «Express-AM5»


Large magnetic set designed for testing electronic devices under the effect of constant uniform magnetic

fields

Small magnetic set designed for measuring the magnetic

behavior of magnetic thin film


Address: 660059, Krasnoyarsk, Semafornaya St., 433/1Telephone: 8 (391) 291-90-95

E-mail: [email protected]: www.rckas.pro

The Industry Resource Center «Space Vehicles and Systems» FSBEI of HPE «Siberian State Aerospace...

Documents

Transcript of The Industry Resource Center «Space Vehicles and Systems» FSBEI of HPE «Siberian State Aerospace...