Solution Rev00 Giu12 ING 00L0059103L-Small

7/31/2019 Solution Rev00 Giu12 ING 00L0059103L-Small

http://slidepdf.com/reader/full/solution-rev00-giu12-ing-00l0059103l-small 1/164

scmsolutions



The best global partner that is very close to woodworking companies.



An industrial group which is leader in the creation, production and distribution of technologically advanced solutions toprocess a vast range of materials (wood, glass, stone, plastic, metals and composite materials), with specialist brandsfor specific technologies and centres of excellence expert in industrial components, present on all 5 continents for morethan 50 years.

PASSIONit’s the passion for our work,it’s the central role of man,his creative genius,the spirit of initiativeand the ability to work within a team.

if you want to build a ship,don’t drum up people to collectwood and don’t assign them tasksand work, but rather teach them toyearn for the endless immensity of the sea.

Antoine de Saint-Exupéry

TECHNOLOGYit is the scientific rigourthat transforms creativityin highly technological solutions,which are accessible and are ableto provide competitive advantages.

every difficulty is overcomeby our determination.Leonardo da Vinci

PERFORMANCEIt is the commitment that is transformedin results and the success of our partnersthat rely on the Scm Group solutions.It’s being recognised as suppliers of “competitive advantages that last over time”.

an organisation’s ability to learn,and translate that learning into action and results rapidly,is the ultimate competitive advantage.Jack Welch

scmgroup



5

“Scm is part of the Premium Division of Scm Group and has been created to offer configured products and servicesdedicated to the trade”. Scm distributes classic and automatic machines through a partnership with the best dealers inthe world, built on business training, technical assistance training, innovative tools for continuous updating.These exclusive tools combined with knowledge of the market allow the dealer to successfully meet customer requirements.The distribution network has 21 branches and more than 350 select dealers.

the best global partner that is very close to woodworking companies.From L’invincibile onwards, Scm has offered the widest range of machines for machining panels and solid wood.Scm’s objective is to guarantee customers high quality technologies which meet their requirements in such a way as tomake Scm Group the partner to go to for any future needs.

scm



scmstrengthpoints

EXPERIENCE60 years experienceproducing and distributing“state-of-the-art”woodworking machines.

THE BESTDISTRIBUTION NETWORK15 subsidiaries and 350 distributorsworldwide, to always be constantlyclose to all our customers.

THE RANGEFrom L’invincibile onwards,the widest range of machinesto process panels and solid wood.

CONSTANT TRAINING1,200 hours training per yearand effective updating toolsfor continuous and accuratetraining of our sales network.

QUALITYA wide range which guaranteescustomer loyalty with Scm who arecommitted to each sale for theirsatisfied customers, to ensure theycontinue to choose Scm for all theirfuture machinery requirements.

INTEGRATIONThe Partners portal providesmaximum integrationbetween the customer,distributor and manufacturer.



7



index classical machines

PROGRAMMEDCIRCULARSAWSpage 16

MANUALCIRCULARSAWSpage 23

SPINDLEMOULDERSWITH FIXEDAND TILTABLESPINDLEpage 32

SURFACEPLANERSpage 48

SI 4OO NOVApage 29

SI 4OO NOVApage 26

TI 12O CLASSpage 39

SI 3OO S NOVApage 29

SI 3OO NOVApage 29

SI 35O CLASSpage 23

TI 1O5 NOVApage 42

TF 11O NOVApage 45

TF 1OO NOVApage 45

F 52OO L’INVINCIBILEpage 48

F 52O CLASSpage 54

F 52O NOVApage 62

F 41O CLASSpage 55

F 41O NOVApage 63

SI 75OO L’INVINCIBILE

page 16

SI 55O CLASS

page 20

SI 4OO CLASS

page 23

SI 3OO CLASSpage 23

TI 26OO L’INVINCIBILEpage 32

TF 24OO L’INVINCIBILEpage 33

TI 155 CLASSpage 36

TF 135 CLASSpage 39

TF 13O CLASSpage 39



9

COMBINEDSURFACE/THICKNESSINGPLANERSpage 58

COMBINEDSAW/SPINDLEMOULDERSpage 70

AUTOMATICPLANERS ANDTHROUGHFEEDMOULDERS

page 78

SEMI-AUTOMATICBORINGMACHINESpage 86

SEMI-AUTOMATICEDGE BANDERSAND TRIMMINGMACHINESpage 82

THICKNESSINGPLANERSpage 50

TENONINGMACHINESpage 74

MULTIBLADERIP SAWSpage 76

S 63O CLASS

page 57

S 63O NOVA

page 64

S 52O CLASS

page 56

S 52O NOVA

pag 65

S 63OO L’INVINCIBILE

page 50

S 52OO L’INVINCIBILE

page 51

FS 41O NOVApage 66

FS 52O CLASSpage 58

ST 35O CLASSpage 70

PROFISET 4Opage 78

TOP 35 E PLUSpage 89

OLIMPIC M 8Opage 82

OLIMPIC M 8O Tpage 83

TEN 22O CLASSpage 74

M 3page 76

STARTECHpage 86

MULTITECH PLUSpage 89

PROFISET 6Opage 81



index advanced machinery

SIGMA P

AUTOMATICBEAM SAWSWITHPLATFORMpage 96

SIGMA

AUTOMATICBEAM SAWSpage 102

TECH

CNC MACHININGCENTRESWITH BARWORKTABLEpage 124

OLIMPIC S

AUTOMATICEDGE BANDERSpage 110

VERTICUT

VERTICALBEAW SAWSpage 108

OLIMPIC K

AUTOMATICEDGE BANDERSpage 116

SIGMA IMPACTpage 102

TECH Z 1page 127

OLIMPIC S 2OOOpage 113

OLIMPIC S 3 OOOpage 113

OLIMPIC K 8OOpage 116



TECH Z 2page 127

OLIMPIC S 1OOOpage 110

VERTICUT 6Opage 108

OLIMPIC K 26O EVOpage 121

TECH Z 5page 124

SIGMA IMPACT P

page 96

SIGMA PRIMA P

page 99

OLIMPIC K 13Opage 121

SIGMA PRIMApage 105



11

CYFLEX

CNC BORINGCENTRESpage 138

GS

PRESSESpage 144

SANDYA

WIDE BELTSANDERS

WITH 2 OR 3OPERATINGGROUPSpage 150

SANDYA

WIDE BELTSANDERSWITH 1 OR 2OPERATINGGROUPSpage 156

PRATIX

CNC MACHININGCENTRES WITHMULTIFUNCTIONWORKTABLEpage 130

CABINETASSEMBLYCLAMPSpage 146

PRATIX N

page 135

PRATIX Z 5

page 130

PRATIX Spage 135

PRATIX Z 2

page 132

SMpage 146

SM-Kpage 147

ASSEMBLA Ppage 148

ASSEMBLA Epage 149

SANDYA 3OOpage 156

CYFLEX H 8OOpage 140

CYFLEX F 9OOpage 138

GSpage 144

SANDYA 9Spage 151

SANDYA 6OOpage 153

SANDYA SYSTEM FIVEpage 157

SANDYA 1Spage 159

SANDYA 16Spage 150



scmclassicalmachinesDesign, cutting, thicknessing and finishing, routing, sanding, assembly.



13



scmtoptechclassical machines

Main toptech

circular sawsSLIDING CARRIAGE:HIGHEST QUALITY OF CUT GUARANTEEDFOR A LONG TIME.The carriage will never require adjustment due to to itsstructure with arch-ground steel slide ways (Scm exclusiveand patented solution) and it can accept loads four timeshigher.

spindle moulders

TOOL DETECTION SYSTEM: SETTING UP SPEEDILY AND SAFELY.This system eliminates any manual operation for settingup the required work allowing the operator to automaticallyinput all the work data and selecting only the programsassociated with the tool installed. Less input data , fewer errors, immediately ready to work.

spindle moulders

ELECTROSPINDLE: MACHINING CENTRETECHNOLOGY SERVICE FOR THE WOODWORKER.Absolute machining precision and absence of vibration dueto the perfectly balanced structure of the electrospindle.Top performance and finishing quality due to the electronicspeed control from 900 to 12.000 rpm. The electrospindle’s

direct drive eliminates maintenance procedures commonwith conventional belt driven systems.

circular saws

“FULL SUPPORT” FRAME WITH “WIRELESS” FUNCTION: WHEN TECHNOLOGY REALLY HELPS.It provides maximum support for the panel for both angledand tilted cuts. It consists of a single centre of rotationfor maximum reliability over time and a robust designto support all angles even with large, heavy panels. Theelectronic control with the integrated “wireless” systemupdates in real-time the data for the positions of the stops,always showing the actual size of the required work piece.



15

planers

INTERCHANGEABLE ROLLERS:ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of therollers that allows the operator to configure the machinedrive function in case of special requirements such as aminimum removal of fine wood and / or batches wheremultiple pieces of different thicknesses are processed. Theoperator does this by simply replacing the first toothedsteel roller with a rubber roller.

planers

PNEUMATIC ADJUSTMENT:THE PERFECT FEED IN ANY WORKING CONDITION.The pressure exerted on the work piece can be changedat any time by adjusting the pneumatic load on the rollersfor the best finish and effectiveness of the feeding of anymaterial and in any working condition.The unique ability to differentially set the pressure on theinfeed and outfeed rollers allows the operator to combinemaximum efficiency of the feed with the need for limited

material removal.

semi-automatic boring machine

THE ONLY BORER THAT DRILLS FROM THE TOP.The system of boring from the top uses the outside of thepanel as a reference concealing any defects; the result isto always move any difference in panel thickness to the

inside of the cabinet.

multiblades rip sawANTI-KICKBACK FINGER BARRIERS:GUARANTEES OPERATOR SAFETY.Maximum degree of safety that is available on the marketdue to the exclusive Scm system using finger barriers thatensure the anti-kickback of the work piece and protectionagainst the splinters produced during machining



SI 75OO L’INVINCIBILE

Machine type electronic programmed

Squaring capacity with carriage and extended stop mm 3200x3200

Blade tilting 90°/46°

Main blade rotating speed rpm 2500 - 3500 - 5000

Scoring blade rotating speed rpm 8500

Cutting height at 90°/45° with 450 mm scoring blade mm 149 / 94

Cutting height at 90°/45° without 550 mm scoring blade mm 200/130

Main blade motor power Hz 50 kW (HP) 9 (12)

Scoring blade motor power Hz 50 kW (HP) 0,9 (1,2)

l’invincibile circular sawsThe exclusive choice for your success.

Circular saw



17

Experience, technical research, Italian creativity:buying a “L’invincibile” machine means you get anexclusive, customised solution.



SAW UNIT:A PERFECT CUT.Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unitwhich ensures perfect alignment of the blades during tiltedand troublesome cuts.

toptech

SLIDING CARRIAGE:MAXIMUM CUT QUALITY GUARANTEED OVER TIME.The carriage will never require adjustment and thanks to itsstructure with arch-ground steel slideways (Scm exclusiveand patented solution) it can bear loads four times higher.

l’invincibile circular sawsadvantages

“ARC” PROFILE: FOR EXCELLENCE IN MACHINING.

• no play and no need for adjustments over time• higher loading capacity• ± 0,05 mm tolerance on the entire carriage length

for straight and high quality cutting.The horizontal positioning of the guides ensures protectionfrom dust therefore improving the sliding of the carriage.



SI 55O CLASS

Machine type electronic programmed

Squaring capacity with carriage and extended stop mm 3200x3200

Blade tilting 90°/46°

Main blade rotating speed rpm 2500 - 3500 - 5000

Scoring blade rotating speed rpm 8500

Cutting height at 90°/45° with 450 mm scoring blade mm 149/94

Cutting height at 90°/45° without 550 mm scoring blade mm 200/130

Main blade motor power Hz 50 kW (HP) 7 (9,5)

Scoring blade motor power Hz 50 kW (HP) 0,9 (1,2)

class circular sawsThe best solution for every application.

Circular saw



21



CLASS SI 3OO SI 35O SI 4OO SI 55O

Machine type M* M or P* M or P* P*

Squaring capacity with carriage and extended stop mm 3200x3200 3200x3200 3200x3200 3200x3200

Main blade rotating speed mm 315 350 400 550

Cutting height at 90°/45° mm 100/70 118/81 140/97 200/130

Main blade motor power Hz 50 kW (HP) 5 (7) 7 (9,5) 7 (9,5) 7 (9,5)

Scoring blade motor power Hz 50 kW (HP) 0,9 (1,2) 0,9 (1,2) 0,9 (1,2) 0,9 (1,2)

* = M manual / P programmed

class circular sawsrange



23

3

4

2 SI 3OO CLASS

SI 35O CLASS

SI 4OO CLASS

Circular saw

Circular saw

Circular saw



class circular sawsadvantages

OPERATOR’S SUPPORT: ONE CUT ONLY, THE CORRECT ONE.The large display suggests to the operator information forthe correct use of any cutting configuration. In particular itdisplays in real time (Scm patent) the correct position of the stop on the basis of the known measurements of thework piece.

SAW UNIT:

A PERFECT CUT.Maximum torsional rigidity and the total absence of vibrationthrough the closed loop structure of the saw unit whichensures perfect alignment of the blades during tilted andtroublesome cuts.

toptech

SLIDING CARRIAGE:MAXIMUM CUT QUALITY GUARANTEED OVER TIME.The carriage will never require adjustment and thanks to itsstructure with arch-ground steel slideways (Scm exclusiveand patented solution) it can bear loads four times higher.



SI 4OO NOVA

Machine type manual/programmed

Squaring capacity 3200 x 3200

Main blade diameter mm 400

90°/45° cutting height mm 140 /97

Main blade motor power Hz 50 kW(HP) 7 (9,5)

Scoring blade motor power Hz 50 kW(HP) 0,9 (1,2)

nova circular sawsGuaranteed quality at your fingertips

Circular saw



27



NOVA SI 3OO S SI 3OO SI 4OO

Machine type M C* M* M or P*

Squaring capacity mm 1600 x 2600 3200 x 3200 3200 x 3200

Main blade diameter (opt) mm 315 (400) 315 400

90°/45° cutting height mm 100 / 70 100/ 70 140/ 97

Main blade motor power Hz 50 kW(HP) 5 (7) 5 (7) 7 (9,5)

Scoring blade motor power Hz 50 kW(HP) 0,9 (1,2) 0,9 (1,2) 0,9 (1,2)

* = M C manual compact / M manual / P programmed

nova circular sawsrange



29

4

2

SI 4OO NOVA

SI 3OO S NOVA

3 SI 3OO NOVA

N V

N VA

Manual circular saw

Compact manualcircular saw

Manual circular saw



nova circular sawsadvantages

“READY” CONTROL SYSTEM: WORK PROGRAMMING BECOMES SIMPLE AND EFFECTIVE.Easy to use due to the “Ready” last generation electroniccontrol for managing:• blade lifting and tilting• programmable parallel fence• display of blade rotation speed• counting and calculator

SLIDING CARRIAGE:SMOOTH OPERATION MOTION GUARANTEED OVERTIME.By the system of sliding bearings running on hardened steelguides using an exclusive method of mechanical fixing.

SAW UNIT:

A PERFECT CUT.Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unitwhich ensures perfect alignment of the blades during tiltedand troublesome cuts.



31



TI 26OO - TF 24OO L’INVINCIBILE

l’invincibile spindle moulderAn immediately recognisable style.

Spindle moulder

TI 26OO TF 24OO

Worktable dimensions mm 2500x750 2500x730

Spindle tilting ±45,50° -

Working length of spindle mm 140 140

Rapid tool change HSK B 63 HSK B 63

Max. tool diameter retractable under table mm 300x75 300x75

“Flex” spindle moulder stroke (positioning with respect to the spindle axis) mm 250 (da -125 a +125) 230 (da -125 a +125)



33

No limit to the creativityand customisationof manufactured products.



toptech

ELECTROSPINDLE: MACHINING CENTRETECHNOLOGY SERVICE FOR THE WOODWORKER.Absolute machining precision and absence of vibration dueto the perfectly balanced structure of the electrospindle.Top performance and finishing quality due to the electronicspeed control from 900 to 12.000 rpm. The electrospindle’sdirect drive eliminates maintenance procedures commonwith conventional belt driven systems.

l’invincibile spindle moulderadvantages

toptech

“FLEX” FENCE:IMMEDIATELY IN THE CORRECT POSITION.A single simple movement to retract and re-position in aninstant and accurately position the fence on the worktablewith such precision that no other control is necessary (Scm patent). The exclusive stroke of 250mm on linear guideswith recirculating ball-bearings ensures maximum flexibilityof use for each type of application (with ±45,50° tilting and

head machining)

toptech

TOOL DETECTION SYSTEM: SETTING UP SPEEDILY AND SAFELY.This system eliminates any manual operation for settingup the required work allowing the operator to automaticallyinput all the work data and selecting only the programsassociated with the tool installed.Less input data , fewer errors, immediately ready to work.



35

toptech

LESS MOVEMENT FOR AFASTER SET-UP.Speed of setting-up due to the unique movement mechanismof the spindle (Scm patent), which allows the operator toposition independently the height of the tool with the tiltedspindle and the moulder fence.All using the last technology:• tilting by screw with recirculating ball-bearings• linear guides for the vertical movement

TENONING CARRIAGE: ABOVE THE WORK SURFACE ONLY WHEN YOU NEED IT.

The only quick and easy exclusion system that allows theoperator to leave its base as an extension to the machineworktable to ensure out-feed continuity of support for thework piece during profiling operations. Simple and precise processing due to robust construction and movements onlinear guides with recirculating ball-bearings.

“FAST” SECTIONAL WORKTABLE:THE BEST SUPPORT FOR THE WORK PIECE.Provides support for the work piece being machined as itis close to the tool, allowing the adjustment with mountedtools and the best quality finish when machining narrowpieces. The extremes in machineable material eliminate thedisadvantages of a possible collision with the tool.



TI 155 CLASS

Worktable dimensions mm 1200x780

Spindle tilting ±45,50°

Working length of spindle mm 140

Rapid tool change HSK B 63

Max. tool diameter retractable under table mm 300 x 80

“Flex” spindle moulder stroke (positioning with respect to the spindle axis) mm 250 (from -125 a +125)

class spindle mouldersThe best solution for every application.

More quality, more performance, more reliability combined with the technological

devices of the class range of spindle moulders. This means reduced machine setup times, greater safety and ease-of-use.

Spindle moulder with tilting spindle



37



CLASS TF 13O TF 135 TI 12O TI 155

Machine type M or E* P* M or E* M or P*

Worktable dimensions mm 1200x730 1200x730 1200x810 1200x780

Spindle tilting - - ±45,50° ±45,50°

Working length of spindle 30-35 (40-50) diameter mm 140 (180) 140 (180) 140 (180) 140 (180)

Electrospindle - option - standard

Max. tool diameter retractable under table mm 320x85 300x85 320x60 300x 80

* = M manual / P programmed / E electric

class spindle moulderrange



39

4

2

3

TI 12O CLASS

TF 135 CLASS

TF 13O CLASS

Spindle moulder with tilting spindle

Spindle moulder with fixed spindle

Spindle moulder with fixed spindle



class spindle moulderadvantages

toptech

ELECTROSPINDLE: MACHINING CENTRETECHNOLOGY FOR THE WOODWORKER.Absolute machining precision and absence of vibration dueto the perfectly balanced structure of the electrospindle.Top performance and finishing quality due to the electronicspeed control from 900 to 12.000 rpm. The electrospindle’sdirect drive eliminates maintenance procedures commonwith conventional belt driven systems.

toptech

“FLEX” FENCE:IMMEDIATELY IN THE CORRECT POSITION.

A single simple movement to retract and re-position in aninstant and accurately position the fence on the worktablewith such precision that no other control is necessary (Scm patent). The exclusive stroke of 250mm on linear guides withrecirculating ball-bearings ensures maximum flexibility of usefor each type of application (with ±45,50° tilting and headmachining).

TENONING CARRIAGE: ABOVE THE WORK SURFACE ONLY WHEN YOU NEED IT.The only quick and easy exclusion system that allows theoperator to leave its base as an extension to the machineworktable to ensure out-feed continuity of support for thework piece during profiling operations. Simple and preciseprocessing due to robust construction and movements onlinear guides with recirculating ball-bearings.



TI 1O5 NOVATI 1O5 NOVASpindle moulder with tilting spindle

nova spindle moulderAn immediately recognisable style.

Worktable dimensions mm 1200x855

Spindle tilting 0° / +45°

Working length of CE spindle 30-35 (40-50) diameter mm 125 (125)

Max. tool diameter retractable under table mm 240x80



43



NOVA TF 1OO TF 11O TI 1O5

Worktable dimensions mm 1080x655 1200X730 1200x855

Spindle tilting - - 0° / +45°

Working length of CE spindle 30-35 (40-50) diameter mm 125 (125) 140 (180) 125 (125)

Max. tool diameter retractable under table mm 240x80 320X85 240x80

nova spindle moulderrange



45

32 TF 11O NOVATF 1OO NOVA

Spindle moulder with fixed spindleSpindle moulder with fixed spindle



nova spindle moulderadvantages

SET UP PRECISION AND RELIABILITY.The operator easily adjusts all movements due to a hand wheelwith mechanical decimal readouts located on the front of themachine, designed to ensure maximum accuracy and highspeeds all with minimal effort.

SPINDLE MOULDER FENCEWITH MECHANICAL PROGRAMMING:MAXIMUM SET-UP SPEED AND EASE-OF-USE.No more test runs due to digital readouts that ensure accuracyto a tenth of a millimetre in positioning the two worktables.



F 52OO L’INVINCIBILE

Working width mm 520

Worktable length mm 3.008

Cutterblock diameter (no. of knives) mm 120 (4)

Cutterblock speed rpm 5000

Surface fence tilting from 90° to -45°

Main motor power kW (HP) 7 (9,5)

l’invincibile surface planerTop quality and reliability

Surface planer



49



S 63OO - S 52OO L’INVINCIBILEThicknessing planers

l’invincibile thicknessing planersPractical and safe.

S 63OO S 52OO


Working width mm 630 520

Maximum working height (minimum) mm 300 (3,5) 300 (3,5)

Maximum stock removal mm 8 8

Electronically adjustable feed speed m/min 4-20 4-20

Main motor power kW (HP) 9 (12) 7 (9,5)



51



E

E

l'invincibile planersadvantages

toptech

CAST IRON WORK TABLES:ETERNITY IS AVAILABLE.Maximum stability and durability over time are guaranteedby the large cast iron ground worktops (3 sqm) that alwaysallows easy and accurate machining.All this is due to the perfect flatness of the table and thesmoothness of the ground surface.

CONCAVE/CONVEX FUNCTION:

PERFECT JOINTS EVERY TIME.The available settings allow perfect bonding of the piecesgiving excellent coupling and eliminating any joint line.Functionality particularly useful in working with long workpieces.

toptech

INTERCHANGEABLE ROLLERS:ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of therollers that allows the operator to configure the machinedrive function in case of special requirements such as aminimum removal of fine wood and / or batches wheremultiple pieces of different thicknesses are processed. Theoperator does this by simply replacing the first toothed steel

roller with a rubber roller.



53

toptech

“SMART LIFTER” INTEGRATED PROTECTION:ERGONOMICS AND SAFETY.The Scm patented protection system is perfectly integratedinto the machine base for maximum protection whileexcluding any hindrance or obstruction in the work. Theprotection with automatic vertical, horizontal and tiltedmovements provides complete coverage of the tool before,during and after machining.

ELECTRONIC ADJUSTMENT OF THE FEED SPEED:THE BEST FINISH AT MAXIMUM SPEED.The optimum feed speed is automatically adjusted by theScm specific management system, which controls thepower consumption of the main motor (planer group),ensuring the best possible finishing quality and avoiding theoverloading of the motor.

toptech

PNEUMATIC ADJUSTMENT:THE PERFECT FEED IN ANY WORKING CONDITION.The pressure exerted on the work piece can be changedat any time by adjusting the pneumatic load on the rollersfor the best finish and effectiveness of the feeding of anymaterial and in any working condition.The unique ability to differentially set the pressure on theinfeed and outfeed rollers allows the operator to combine

maximum efficiency of the feed with the need for limitedmaterial removal.



F 52O - F 41O CLASS

class surface planersQuality oriented solutions.

F 52O F 41O


Total worktables length mm 2750 2610

Cutterblock diameter (no. of knives) mm 120 (4) 120 (4)

Cutterblock speed rpm 5000 5000

Surface fence tilting from 90° to -45° from 90° to -45°

Main motor power kW (HP) 5 (7) 5 (7)

Surface planers



55



S 63O - S 52O CLASS

class thicknessing planersEfficient, top quality finishing - guaranteed.

Thicknessing planers

S 63O S 52O



Maximum working height (minimum) mm 300 (3,5) 300 (3,5)

Maximum stock removal mm 8 8

Feed speed m/min 4 - 20 4 - 20

Main motor power kW (HP) 7 (9,5) 7 (9,5)



57



FS 52O CLASS

class combined surfacing/thicknessing planerEasy to use with rapidity combined with reliability and precision.

Combined surface/thicknessing planer



Motor power kW(HP) 7 (9,5)

Surface planer

Total worktables length mm 2300

Surface fence dimensions mm 1200 x 190


Thicknessing planer

Working height (min-max) mm 3/250

Feed speed m/min 5 - 8 - 12 - 18



59



E

E

class planersadvantages

SERVO SYSTEM FOR THE OPENING OF THE TABLES: SPEED, ERGONOMICS AND SAFETY.Changing the process from surfacing to thicknessing is noweasy, safe and effortless due to the two buttons on the frontof the machine that, as well as automatically raising thework tables, position the related extraction hood and thesafety system. fs520 class

CONCAVE / CONVEX FUNCTION: PERFECT JOINTS EVERY TIME.The available settings allow perfect bonding of the piecesgiving excellent coupling and eliminating any joint line.Functionality particularly useful in working with long workpieces.

toptech

INTERCHANGEABLE ROLLERS:ONE MACHINE FOR EVERY REQUIREMENT.

Perfect finish obtained by quick and easy changeover of therollers that allows the operator to configure the machinedrive function in case of special requirements such as aminimum removal of fine wood and / or batches wheremultiple pieces of different thicknesses are processed.The operator does this by simply replacing the first toothedsteel roller with a rubber roller.



61

toptech

“SMART LIFTER” INTEGRATED PROTECTION:ERGONOMICS AND SAFETY.The Scm patented protection system is perfectly integratedinto the machine base for maximum protection whileexcluding any hindrance or obstruction in the work.The protection with automatic vertical, horizontal and tiltedmovements provides complete coverage of the tool before,during and after machining.

toptech

DUAL DENSITY ROLLER: THE OPTIMAL FEEDON WORK PIECES WITH DIFFERENT THICKNESSES.The fluid feeding also provides the best quality in thesimultaneous processing of multiple boards with differentthicknesses. The edges are not damaged even when thework pieces are not perfectly aligned giving great resultseven with minimum removal.

PNEUMATIC ADJUSTMENT:THE PERFECT FEED IN ANY WORKING CONDITION.The pressure exerted on the work piece can be changedat any time by adjusting the pneumatic load on the rollersfor the best finish and effectiveness of the feeding of anymaterial and in any working condition.



F 52O - F 41O NOVA

nova surface planersGuaranteed quality at your finger tips.

F 52O F 41O


Total worktables length mm 2750 2610

Cutterblock diameter (no. of knives) mm 120 (4) 120 (4)

Spindle speed rpm 5000 5000

Surface fence tilting from 90° to -45° from 90° to -45°

Main motor power kW (HP) 5 (7) 5 (7)

Surface planers



65



FS 41O NOVA

nova combined surfacing/thicknessing planerEasy to use with rapidity combinedwith high productivity.

Combined surface/thicknessing planer



Motor power kW(HP) 5 (7)

Surface planer

Total worktables length mm 2200

Surface fence dimensions mm 1200 x 160


Thicknessing planer

Working height (min-max) mm 3,5/240

Feed speed m/min 6-12



67



nova planersadvantages

toptech

INTERCHANGEABLE ROLLERS:ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of therollers that allows the operator to configure the machinedrive function in case of special requirements such as aminimum removal of fine wood and / or batches wheremultiple pieces of different thicknesses are processed. Theoperator does this by simply replacing the first toothed steelroller with a rubber roller.



ST 35O CLASS

Maximum cutting height at 90° (45°) mm 118 (81)

Blade tilting 45°

Cross movement of the entire saw unit mm 165

Squaring capacity with 2200 mm carriage mm 2200 x 3200

Squaring capacity with 3200 mm carriage mm 3200 x 3200

combined saw and spindle moulderThe versatility of the very best spindle moulderscombined with the cutting quality of Scm circular saws.

Combined saw/spindle moulder



71

The st350s version is even more compact and easy to use thanks to theshort carriage 2200 mm.



combined saw/spindle mouldersadvantages

ALL CONTROLSAT YOUR FINGERTIPS.The operator easily manages every working operation dueto the 4 hand wheels with mechanical digital readoutspositioned on the front of the machine that guaranteesprecise settings. This ideal positioning includes the horizontalsaw unit movement with respect to the spindle ensuring themaximum flexibility during end cutting machining.

SPINDLE MOULDER FENCE

WITH MECHANICAL PROGRAMMING:MAXIMUM SET-UP SPEED AND EASE-OF-USE.No more test runs due to digital readouts that ensureaccuracy to a tenth of a millimetre in positioning the twoworktables.

toptech

SLIDING CARRIAGE:HIGHEST QUALITY OF CUT GUARANTEED FOR A LONG TIME.The carriage will never require adjustment due to to itsstructure with arch-ground steel slide ways (Scm exclusiveand patented solution) and it can accept loads four timeshigher.



73

SAW UNIT:A PERFECT CUT.Maximum torsional rigidity and the total absence of vibrationthrough the closed loop structure of the saw unit whichensures perfect alignment of the blades during tilted andtroublesome cuts.



TEN 22O CLASS

Max. tool diameter mm 350

Tool rotating speed rpm 3600

Rapid tool changer ISO 40

Max. tool diameter mm 400

Max. cutting height mm 120

Blade rotation speed rpm 3000

tenoning machineRapidity and precisionwith the rapid tool changer.

Tenoning machine



75

TOOL CHANGE:INCOMPARABLE WORKING RAPIDITY.A few seconds to change the tool due to the interchangeablespindle with rapid taper. The cleaning system uses thecombination of the air blowers to maintain the cleaning of the contact surfaces with the tool guaranteeing the very bestsafety and coupling accuracy.



M 3

Feed track wide mm 300

Max. width of blades pack mm 350

Min. cutting length mm 250

Continuously adjustable feed track speed m/min 6-48

Motor powers kW (HP) 18,5/ 25,5/ 37 (25/ 35/ 50)

multiblade rip sawCompact and simply designed constructionfor a high performance multiblade rip saw.

Multiblade rip saw

toptech

ANTI-KICKBACK FINGER BARRIERS:GUARANTEES OPERATOR SAFETY.Maximum degree of safety that is available on the marketdue to the exclusive Scm system using finger barriers thatensure the anti-kickback of the work piece and protectionagainst the splinters produced during machining.



77



PROFISET 4O

Min/max working width (finished section) mm 23/180

Min/max working height (finished section) mm 6/105

Feed speed m/min 6-12

Spindles speed rpm 6000

Automatic planer and throughfeed moulder

planers and throughfeed mouldersVersatile, ergonomic and safe.



81

2 PROFISET 6O

Automatic planers and throughfeed moulders with up to 6 spindlesVersatile, ergonomic and safe.The planers / throughfeed moulders are sturdy machineswith high quality components to always ensure the very best performance.

Automatic planer and throughfeed moulder.



OLIMPIC M 8O - M 8O T

edge bander and trimming machineVersatility and ease-of-use.

Edge bander - Trimming machine

OLIMPIC M 8O OLIMPIC M 8O T

Edge thickness mm 0,5 -3 0,5 - 3

Panel thickness mm 10 - 80 12 - 80

Minimum panel width mm 50 50

Minimum panel length mm 200 200

Minimum internal radius mm 20 20

Feed speed m/min 2-10 -

Compressed air bar 6 6



edge bander and trimming machineadvantages

SIMPLE AND PRECISE SETTING OF THE TRIMMING GROUPThe trimming adjustment is carried out in few seconds andwithout errors by means of the Scm exclusive device whichprovides a pivoting ring with a decimal dial which allowsthe adjustment of the vertical copier without using any tool.m 80 t

A PATENTED SUPPORT SURFACETO FACILITATE THE WORKNo preparation of panel support jigs because theworktable provides supports that can be freely positionedand rotated creating a large support surface for maximumstability when processing the panel.m 80 t

toptech

GLUING THE MOST CRITICAL EDGES WITHOUT COMPROMISEOptimum application of the edge on curved panels and alsowith particularly rigid edges due to the 2 powered pressurerollers, removable when required (Scm patent), which allowthe choice of the correct configuration depending upon thegeometry of the panel.m 80



85



STARTECH 27

semi-automatic multi-head boring machinesExcellence in semi-automatic boring.Multi-head boring machine for horizontal and vertical boring.

Multihead boring machine

STARTECH 27

Spindles no. 27

Distance between spindles mm 32

Spindles speed rpm 3000

Spindles motor power kW (HP) 1,5 (2)



BORING MACHINES MULTITECH 3PLUS

MULTITECH 2PLUS

TOP 35 PLUSTOP 35 E PLUS

STARTECH 27

Spindles no. 21+21+21 21+21 35 27

Distance between spindles mm 32 32 32 32

Spindles speed rpm 2800 2800 2800 3000

Spindles motor power kW (HP) 1,1 (1,5) 1,1 (1,5) 4,4 (6) 2 motors 1,5 (2)

semiautomatic multihead boring machinesrange



2 MULTITECH PLUS

3 TOP 35 PLUS

89

Semi-automatic multiheadboring machine

Semi-automatic multiheadboring machine



semiautomatic multihead boring machinesadvantages

toptech

THE ONLY BORER THAT DRILLS FROM THE TOPThe system of boring from the top uses the outside of thepanel as a reference concealing any defects; the result is toalways move any difference in panel thickness to the insideof the cabinet.top 35

EVERYTHING INCLUDED AS STANDARDThe basic supply includes everything you need to makea “rich” composition for the machine: pneumatic headrotation, side guides which can be excluded from the tableand extensions L=3 metre with 4 retractable stops.startech

QUICK ATTACHMENTSFOR EASY SETTING UPThis solution enables a quick tool replacement, essentialto move smoothly from one job to another, eliminatingdowntime.



91



scmadvancedmachinerycutting, edge banding, boring-routing, calibrating-sanding, assembling.



9333



scmtoptechadvanced machinery

Main toptech

sigma beam sawsSELECTABLE AIR BLOWING TABLE:AN ESSENTIAL TOOL.The possibility to enable / disable the air blowing featureon each table section via 4 independent motors, ensuringoptimal sliding of the panels only where it is needed andavoids accidental falling of cut panels temporarily storedon the tables. This solution also provides energy saving.

sigma beam sawsFLOATING CLAMPS:THE GUARANTEE OF THE END RESULT.The special shape of the clamps gently grips thepanels giving the grip at the maximum speed and alsoperfect parallelism when panels are not perfectly planar.

olimpic edge banders

“ROUND 2M”: INCOMPARABLE PRODUCTIVITYAND QUALITY WITH 2 MOTOR TECHNOLOGY. The features of the group (Scm patent) allows an18 m/min rounding speed as well as the possibility of thesimultaneous edge trimming operation. Two operations,in a single group, occupying less space, allows for areduction in time for the edge banding of panels.

olimpic edge banders

PANEL MOVEMENT SYSTEM: DESIGNED FOR A PERFECT FINISH. The best finish of the panel edge is also guaranteed by theconveying track (Scm patent), which prevents the panelhaving the feed affected by the typical pulse generated by

the pinion of a traditional feed track.



1 4 3 2

A

A

95

cyflex cnc boring centres

BORING FROM THE TOP =PERFECT FINISH.The system of boring from the top utilises the outside of the panel as a reference so concealing defects; the resultis to always move any difference in the panel thickness tothe inside of the cabinet.

tech and pratix cnc machining centres

“BUMPERS”: THE PERFECT COMBINATIONOF SAFETY AND PRODUCTIVITY.The “bumpers” safety system is the only one that can fullyexploit the potential of machining centres, without placingrestrictions or constraints on the use of the machine:• maximum productivity• ease-of-use• more compact dimensions• guaranteed safety

sandya wide belt sanders

DIAMOND-SHAPED BELT: NO SLIPPING OF THE WORK PIECES.The special rubberised diamond-shaped profile providesthe best traction surface for the work piece and theincreased support area also ensures maximum stability.

sandya wide belt sanders

“MESAR” SECTIONAL PAD:THE BEST FINISH WITH ANY MATERIAL.Higher quality results due to the special shape of thesectors that allows the operator to intervene “softly”but also in an “aggressive” way, simply by varying theworking pressure. The setting of the pad position and the

possibility of using foils of different thicknesses increasesits versatility.



SIGMA IMPACT PHorizontal beam saw with loading platform

Cutting length mm 3200/3800/4500

Cutting depth on platform mm 1850/2200

Max. height of panel stack on platform with support beams mm 600

Blade projection mm 107

Variable saw carriage speed m/min 0-80

Variable pusher speed m/min 0-50

Main blade motor power (S6 –40%) kW (HP) 9 (12)

sigma pThe best solution forany cutting requirement.



97

Advanced technological solutions for perfect cutting quality.At the “pinnacle” of technology but with a reduced price.



sigma padvantages

toptech

FLOATING CLAMPS:THE GUARANTEE OF THE END RESULT.The special shape of the clamps gently grips the panelsgiving the grip at the maximum speed and also perfectparallelism when panels are not perfectly planar.

CARRIAGE GUIDES:GUARANTEED CUT QUALITY.Parallelism and absolute perpendicularity of the guides onwhich the carriage runs is guaranteed by machining of theentire frame on cnc machines. The ideal solution gives a cutthat is always perpendicular and perfect.impact p

AIR BLOWING

ALSO ON THE MACHINE TABLE.The sliding of heavy or delicate materials is achieved throughthe air blowing on the cutting table that protects against therisks of friction.impact p



101

rgb

toptech

LOADING PLATFORM: WHEN STURDINESS AND PRECISION MAKE THE DIFFERENCE.The lifting system, running on 4 large trapezoidal screws, as well as to maximize the load capacity in any material andformat, always ensures parallel lifting of the stacks of panels avoiding downtime and achieving maximum productivity.

ADAPTIVE CONTROL OF THE CARRIAGE SPEED: SAFE WORKING.The automatic monitoring of energy absorption of the motor according to the material and the type of the saw bladeused gives the best results and avoids errors and wastage.impact p



SIGMA IMPACTHorizontal beam saw

sigmaDesigned to be the very best.

87 1O7

Cutting length mm 3200/3800/4500 3200/3800/4500

Cutting depth mm 2100/3200/3800/4300 2100/3200/3800/4300

Blade projection mm 87 107

Variable saw carriage speed m/min 6-30 6-30

Variable pusher speed m/min 27 38

Main motor power (S6 –40%) kW (HP) 7 (9,5) 9 (12)



103

The machine within everybody’s reach.Integration in the Netline process which manages the Design, the Programmingand Furniture Automatic Production in all machining phases: Sizing, EdgeBanding, Boring-Routing.



sigmarange

SIGMA PRIMA 5O PRIMA 67 IMPACT 87 IMPACT 1O7

Cutting length mm 3300/3800/4300 3300/3800/4300 3200/3800/4500 3200/3800/4500

Cutting depth mm 2100/3200/3800/4300

2100/3200/3800/4300

2100/3200/3800/4300

2100/3200/3800/4300

Blade projection mm 50 67 87 107

Variable sawcarriage speed

m/min 6-30 6-30 6-30 6-30

Variable pusher speed m/min 24 24 27 38

Main blade motor power(S6 –40%)

kW (HP) 7 (9,5) 7 (9,5) 7 (9,5) 9 (12)



SIGMA PRIMARIMA P2

105

Beam saw



sigmaadvantages

scontornarergb

toptech

SELECTABLE AIR BLOWING TABLE:

AN ESSENTIAL TOOL.The possibility to enable / disable the air blowing featureon each table section via 4 independent motors, ensuringoptimal sliding of the panels only where it is needed andavoids accidental falling of cut panels temporarily stored onthe tables. This solution also provides energy saving.

“HIGH SPEED” DEVICE:ABSOLUTE SPEED.High productivity due to:• axes speed up to 150 m/min on the beam saw carriage and

120 m/min on the pusher• optimised logic of cutting cycles on the carriage, pressure

beam and pusher groups



107

OVERHEAD SIDE PROTECTIONS:MORE SPACE FOR THE WOODWORKING WORKSHOP.The shape of the protections allows operators to use thelarge space under the rear of the machine as storage spacefor additional panels.

DIFFERENTIATED PRESSURE:

THE PERFECT RESULT ON ANY MATERIAL.Optimal machining of “soft” materials and the onesdeformable due to incorrect pressure, due to automatic andindependent management of the pressure beam and clamps.impact

WINCUT:WORKING MADE EASY.Complete management of the beam saw, easily and intuitively,through the use of graphic functions including:• report of the total production• diagnostics• materials management and related processing parameters



VERTICUT 6O

verticutAbsolutely easy to use.

Maximum cutting thickness mm 60

Vertical cutting height mm 2200

Horizontal cutting height mm 2080

Horizontal cutting width mm 4300

Main blade motor power -50 Hz kW (HP) 4 (5)

Main blade diameter (spindle diameter) mm 250 (30)

Scoring blade diameter (spindle diameter) mm 70 (20)

Exhaust outlets diameter mm 2 x 100 + 5 x 50

Vertical beam saw



109

The vertical beam saw equipped also with the scoring blade group thatguarantees optimum results on all surfaces. The semi-automatic version is alsocapable of satisfying the more intensive working cycles.

LINEAR GUIDES:MINIMUM EFFORT FOR THE OPERATOR.All moving groups are equipped with linear guides mounted on ball bushing padsthat improve the smoothness and easy movements during the cutting phase.



OLIMPIC S 1OOOHeavy-duty edge bander

Edge thickness mm 0,4 - 15

Panel thickness mm 10 - 60

Feed speed m/min 12 - 18 (22 opt.)

Compressed air bar 6

olimpic sThe perfect solution for alledge banding production requirements.



111

The best finishing quality with any type of edge.Innovative solutions at the top of edge banding specialisation.



olimpic srange

OLIMPIC S S 3OOO S 2OOO S 1OOO

Edged thickness mm 0,4 - 22 0,4 - 15 0,4 - 15

Panel thickness mm 10 - 60 10 - 60 10 - 60

Feed speed m/min 12 - 18 12 - 18 12 - 18 (22 opt.)

Compressed air bar 6 6 6



2 OLIMPIC S 2OOO

113

3 OLIMPIC S 3OOO

For industrial productionat the very best levels.

Heavy-duty edge bander

Heavy-duty edge bander



“RT-E” PANEL EDGE TRIMMING GROUP:A PERFECT JOINT LINE ON THE EDGE.An optimum panel edge trimming group before edge gluing,due to the use of the front copying devices that allow constantmaterial removal over the entire panel length, maintaining thesame work piece geometry.s 1000 - s 2000

toptech

“ROUND 2M”: INCOMPARABLE PRODUCTIVITYAND QUALITY WITH 2 MOTOR TECHNOLOGY.The features of the group (Scm patent) allows an18 m/min rounding speed as well as the possibility of thesimultaneous edge trimming operation. Two operations, ina single group, occupying less space, allows for a reductionin time for the edge banding of panels.s 1000 - s 2000

“STARTOUCH” CONTROL:

JUST A “TOUCH” FOR USING THE MACHINE.Error free programming with the large dimensioned touch-screen display and its customised graphics that allows anintuitive and easy selection of the main machine functions.s 1000

olimpic sadvantages



115

T-1OOO SPINDLE MOULDER GROUP: A SUITABLEGROUP FOR EVERY MACHINING REQUIREMENT.Maximum machining precision, guaranteed on the edge andon both the upper and lower panel surfaces, due to the front andvertical copiers that follow the perfect geometry of the panel.

“RAS/S 2P” EDGE SCRAPING GROUP:2 RADII, ALWAYS AVAILABLE.The change of the machining radius is performed automaticallyand without errors using the two-position pneumatic device,that allows fast and precise positioning of tools and frontcopiers in relation to the selected edge thickness.s 1000

toptech

“3 EDGE”DEVICE:

A PATENT ROUNDING 3 DIFFERENT EDGES.The change of the rounding radius of the 4M rounding groupis automatically carried out thanks to the exclusive patenteddual tool solution that allows the immediate selection of theprocessing of 3 different edge thicknesses.s 1000



OLIMPIC K 8OOAutomatic edge bander

Edge thickness mm 0,4 - 8 (12 opt.)

Panel thickness mm 8 - 60

Feed speed m/min 12 - 18

Compressed air bar 6

olimpic k Sturdy and reliable for highest productivity andhigh quality machining.



117

Ease of use and a high level of technology: ideal solutionfor smaller woodworking companies.



olimpic k range

OLIMPIC K K 4OO K 6OO K 8OO

Edge thickness mm 0,4 - 6 0,4-3 (8 opt.) 0,4 - 8 (12 opt.)


Feed speed m/min 11 (13 opt.) 11 - 16 12 - 18




2

OLIMPIC K 6OO

OLIMPIC K 4OO

119

3

Compact edge bander

Compact edge bander



olimpic k range

OLIMPIC K K 13O K 26O EVO K 8OO

Edge thickness mm 0,4 - 3 0,4 - 6 0,4 - 8 (12 opt.)


Feed speed m/min 9 9 12 - 18




5

4

OLIMPIC K 13O

OLIMPIC K 26O EVO

121

Compact edge bander

Compact edge bander



123

“K-2” END CUTTING UNIT:CUT AND “RADIUS” IN A SINGLE OPERATION.Automatic and error free cut of thick edge due to theparticular system with two blades that allows also the solidwood straight cut and the chamfering of the thin edge.k 130 - k 260 evo - k 400

toptech

PANEL MOVEMENT SYSTEM:DESIGNED FOR A PERFECT FINISH.The best finish of the panel edge is also guaranteed by theconveying track (Scm patent), which prevents the panelhaving the feed affected by the typical pulse generated bythe pinion of a traditional feed track.k 130 - k 260 evo

“VC-VM” GLUE POT:ONLY A FEW SECONDS TO CHANGE THE TYPE OF GLUE.The use of different types of glue is carried out easily bythe convenient patented system that with a few operations,in only 90 seconds, allows the substitution of the glue potwithout the necessity of further adjustments.k 260 evo - k 400



TECH Z 55-axes cnc machining centre with bar worktable

techDesigned to be the very best.

* = with vertical cutter

Z5-31 Z5-52

Working area along X-Y*-Z axes mm 3050 - 1550 - 160 5200 - 1550 - 160

Panel clearance in Y axis mm 1550 1550

Panel length (for alternated work process) mm 1390 2460

f18 boring head with electrospindle up to: kW (HP) - S6 12 (16,5) 12 (16,5)

Tool changers up to: 22 22



125

Ideal solution to machine the sectioned panel and equippedwith devices allowing solid wood machining as well.Optimised time and resources thanks to the Netline integration.



TECH Z 13

TECH Z 22

127

CNC machining centrewith bar worktable

CNC machiningcentre withbar worktable



tech zadvantages

HORIZONTAL ELECTROSPINDLE:HIGH WORKING SPEED.The direct output of motion power without gears andsprockets, a guarantee of sturdiness, allows the processingof heavy duty work easily and fast, without having to worryabout the possible breaking of the wood or the tooling.tech z2

“NETLINE”:

PROGRAMMING MACHINES AUTOMATICALLY.The automatic programming of beam saws, edge banders andmachining centres, interconnected via a PC with advancedsoftware, allows the creation of complete projects without anyoperator intervention and no risk of errors.

• maximum productivity• ease-of-use• more compact dimensions• guaranteed safety

toptech

“BUMPERS”: THE PERFECT COMBINATIONOF SAFETY AND PRODUCTIVITY.The “bumpers” safety system is the only one that can fullyexploit the potential of machining centres, without placingrestrictions or constraints on the use of the machine:



129

“AUTOSET”: BARS AND VACUUM CUPSAUTOMATICALLY IN THE CORRECT PLACE.The most practical and economical system that, using aspecial driving device, uses the movements of themachine body to position bars and suction cups. While theoperator works on the other field, the machine prepareseverything independently and without any alignmentinspection required (no laser, metric rules, or LEDs,…)

toptech

“PRISMA 5” 5 AXIS ELECTROSPINDLE:OPERATING EASILY IN REDUCED SPACES WITHOUTRISK OF COLLISIONS.No limits to the possible uses of the 5-axis “Prisma 5” groupwhich, with the patented Scm solution, allows the keepingof the overall dimensions in each direction of travel to aminimum. This results in maximum operator convenienceand flexibility of use.tech z5

MECHANICAL FIXING OF VACUUM CUPS:CERTAINLY BEST RESULTS.The certainty of quality results is guaranteed by a powerfulmechanical grip that locks into position the vacuum cups;instead of the widespread vacuum system. It is unrivalledwhen working in heavy duty conditions and unique in beingfree from dust (Scm patent).



PRATIX Z 55-axes cnc machining centre with multifunction table

pratix “Multifunction”par excellence.

Z5-31 Z5-52

Working area along X-Y*-Z axes mm 3110 - 1550 - 160 5200 - 1550 - 160

Panel clearance in Y axis mm 1550 1550

Panel length (for alternated work process) mm 1390 2460

f18 boring head with electrospindle up to: kW (HP) - S6 12 (16,5) 12 (16,5)

Tool changers up to: 22 22

* = with vertical cutter



131

5-axes cnc machining centre with multifunction aluminium table and “T”-shapedgrooves: “top-of-the-range” for those who consider flexibility as a way of life.The very best multipurpose machine available due to the possibility to sizenested panels and bore-router already sized panels.



133

Cnc machining centre with multifunction aluminium table and “T”-shapedgrooves: “top-of-the-range” for those who consider flexibility as a way of life.The very best multipurpose machine available due to the possibility to sizenested panels and bore-router already sized panels.



pratix range

PRATIX PRATIX N 12 PRATIX N 15 PRATIX S 12 PRATIX S 15 PRATIX S 22-31

Working area along X-Y*-Z axes mm 2440-1220-150 3660-1550-150 2480-1250-150 3686-1555-150 3100-2250-150

Vectorial speed along X-Y axes mm 56 56 35 35 35

Boring head withelectrospindle up to:

(HP) - S6 12 (16,5) 12 (16,5) 6,6 (9) 6,6 (9) 6,6 (9)

Tool changers up to: 20 20 8 10 14

* = with all tools



2 PRATIX N

PRATIX S3

135

High performance cnc machining centrewith multifunction table

“Entry-level” cnc machining centrewith multifunction table

Why choose the pratix?Because it is the ideal machine for those who have machining with nesting requirements.



pratix advantages

SAFE AND COMPACT.Ideal for those with limited available space,it is distinguished by:• absence of perimeter protections• protections mounted directly on the mobile upright• also free access to the rear of the machinepratix s

BORING HEADS:NO MORE MACHINE DOWNTIME.The sturdiness of Scm boring heads is proven by thefrequency of required maintenance, only every 1000 hours,five times better than that imposed by the majority of other machine manufacturers: indestructible and with lowmaintenance.

• maximum productivity• ease-of-use• more compact dimensions• guaranteed safety

toptech

“BUMPERS”: THE PERFECT COMBINATIONOF SAFETY AND PRODUCTIVITY.The “bumpers” safety system is the only one that can fullyexploit the potential of machining centres, without placingrestrictions or constraints on the use of the machine:



137

“TECPAD”EASE OF USE AND PRODUCTIVITY AT FINGER TIPS.The “Tecpad” standard remote control with LCD display,with 7” colour touch-screen allows the operator to fullymanage the machine intuitively. The commands are alwaysclose to both the machine and the operator.pratix s

“HE” WORKTABLE:DESIGNED FOR EFFICIENCY AND SAVING.Careful studies and tests allow us to achieve a high level

of work piece holding down without resorting to severalhigh-power vacuum pumps. The result:• secure hold down of the work piece = excellent machining speed• internal flows’ speed of up to 250Km/h = efficiency on the

whole worktable• less consumption = energy saving (ecologically beneficial)pratix s - pratix n

toptech

“PRISMA 5” 5 AXIS ELECTROSPINDLE:OPERATING EASILY IN REDUCED SPACES WITHOUTRISK OF COLLISIONS.No limits to the possible uses of the 5-axis “Prisma 5” groupwhich, with the patented Scm solution, allows the keepingof the overall dimensions in each direction of travel to aminimum. This results in maximum operator convenienceand flexibility of use.pratix z5

fluid dynamic analysis



CYFLEX F 9OOCnc boring centre

cyflex Very high flexibility, very high productivity,very high precision.

Why choose the cyflex?

• carries out all boring and vertical routing operations• carries out grooving• no operator’s intervention for work table tooling• very compact overall dimensions

F 9OO

Max. panel dimensions along X-Y-Z axes mm 3050 x 900 x 50

Min. panel dimensions along X-Y-Z axes mm 150 x 70 x 10

Max. X-Y axes speed m/min 40

Boring head: vertical/horizontal spindles, blade in X no. 12/6

Electrospindle motor power kW (Hp) 5,5 (7,5)



cyflex range

CYFLEX H 8OO F 9OO

Max. panel dimensions along X-Y-Z axes mm 3050 x 800 x 60 3050 x 900 x 50

Min. panel dimensions along X-Y-Z axes mm 200 x 80 x 10 150 x 70 x 10

Max .X-Y axes speed m/min 18 40

Boring head: vertical spindles/horizontal spindles, blade in X no. 8/6 12/6

Electrospindle motor power kW (Hp) - 5,5 (7,5)



2 CYFLEX H 8OO

141

Cnc boring centre

The perfect machine to commence boring successfully.The new Scm boring centre: the matching point betweena woodworking workshop and industrial companies.



143



GSAutomatic press

gsThe best choice for pressingpanels, doors and furniture.

GS 25-13 GS 3O-13 GS 35-13 GS 35-16 GS 38-16

Dimensions 2500 X 1300 3000 X 1300 3500 X 1300 3500 X 1600 3800 X 1600

No. of. cylinders 6 6 8 8 10

Tonns 90/120 90/120 120/160 160 200



2 GS

145

High technology for pressingpanels, doors and furniture.

Press with intermediate worktable



SM - SM K

smFrom the small woodworking workshopto the window production plant.

SM 3O-17 SM 3O-2O SM 35-25 SM K 3O-17 SM K 3O-2O SM K 35-25

Dimensions 3000 X 1700 3000 X 2000 3500 X 2500 3000 X 1700 3000 X 2000 3500 X 2500

Vertical thrust (tonns) 14 14 14 10 10 10

Horizontal thrust (tonns) 6 6 6 4 4 4

Frame press



SM K2

147

High power combined to high gluing performance on any kindof window system: windows, slatted shutters, shutters and solid wood doors.

Frame press



SANDYA 16 SAutomatic wide belt sander

sandyaAutomatic wide belt sanderswith 2 or 3 operating groups.

11O 135


Min/max working thickness mm 4-170 4-170

Sanding belt width mm 1115 1370

Sanding belt length mm 2620 2620

Standard main motor power (model with 2 groups) kW (HP) 11 (15) 11 (15)

Standard motor power of the two main motors (model with 3 groups) kW (HP) 11 (15) 11 (15)

Feed belt speed m/min 4,5/9 4,5/9



SANDYA 9 S

151

High quality and production performance: “typical” of the industrial level of machines.High degree of finishing and optimum production levels with every type of machining: solid wood calibratingand sanding, plus veneer, lacquer and painted panel sanding.

Automatic wide belt sander

11O 135






Standard motor power of the two main motors (model with 3 groups) kW (HP) 11 (15) 11 (15)




sandyarange

SANDYA 6OO 9 S 16 S

11O 135 11O 135 11O 135

Working width mm 1100 1350 1100 1350 1100 1350

Min/max working thickness mm 4-170 4-170 4-170 4-170 4-170 4-170

Sanding belt width mm 1115 1370 1115 1370 1115 1370

Sanding belt length mm 2150 2150 2620 2620 2620 2620

Standard main motor power (model with 2 groups) kW (HP) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15)

Standard motor power of the two main motors (model with 3 groups) kW (HP) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15)

Feed belt speed m/min 4,5/9 4,5/9 4,5/9 4,5/9 4,5/9 4,5/9



SANDYA 6OO3

153


Always at the “top” level of performance with the Scm wide belt sandersthat ensures maximum versatility, productivity and quality



sandyaadvantages

toptech

“MESAR” SECTIONAL PAD:THE BEST FINISH WITH ANY MATERIAL.Higher quality results due to the special shape of the sectorsthat allows the operator to intervene “softly” but also in an“aggressive” way, simply by varying the working pressure.The setting of the pad position and the possibility of usingfoils of different thicknesses increases its versatility.

AUTOMATIC TABLE POSITIONING:

PRACTICALITY AND PRECISION TOGETHER.The automatic detection of the work piece thickness allowsprecise machining at all times and without the risk of operatorerror. The decimal setting of this system also allows settingthe work depth independently of the material.

“HPL” PLANER GROUP:MAXIMUM REMOVAL COUPLED WITH MAXIMUM SAVINGS.One single pass to perform heavy material removal withthe absorption of low power; a degree of finish comparableto 4 abrasive belts due to the helicoidal positioning of theknives mounted on the group. The easy access allowed bythe exclusion of the infeed rollers simplifies maintenanceoperations.



155

“LOGIC SC” ELECTRONIC PROGRAMMER:EASILY AVOID MISTAKES.Simple and intuitive, allowing the operator to set all processingparameters in sequence and then launch them with thetouch of a button. The possibility to store various workprograms to retrieve the machine settings most commonlyused makes it ideal even for unskilled operators.

toptech

DIAMOND-SHAPED BELT:NO SLIPPING OF THE WORK PIECES.The special rubberised diamond-shaped profile provides thebest traction surface for the work piece and the increasedsupport area also ensures maximum stability.

LONG BELTS: 2.620 MM LENGTH FOR GREATERFINISHING AND PRODUCTIVITY.Better cooling of the abrasive grit due to the greaterdevelopment of the belts that reduces the adherence of processed dust. An extended belt length lasts longer , requiresfewer replacements and consequently less downtime. sandya 9s - sandya 16s



SANDYA 3OO

sandyaWide belt sanderswith 1 or 2 groups.

95 11O

Working width mm 95o 1100






Automatic wide belt sanders



SANDYA SYSTEM FIVE

157



Min/max working thickness mm 4-170

Sanding belt width mm 1115

Sanding belt length mm 2.150

Standard main motor power (model with 2 groups) kW (HP) 11 (15)

Feed belt speed m/min 4,5/9

Designed for the woodworker who is looking to the future.Best solutions for all requirements with the availability of machines set-up. “System Five” group: one group, fivedifferent settings for every type of surface.



sandyarange

SANDYA 1 S SYSTEM FIVE 3OO

95 11O 95 11O

Working width mm 950 1100 950 1100

Min/max working thickness mm 4-170 4-170 4-170 4-170

Sanding belt width mm 970 1115 970 1115

Sanding belt length mm 1.525 2.150 1900 1900

Standard main motor power (model with 2 groups) kW (HP) 5,5 (7,5) 11 (15) 11 (15) 11 (15)

Feed belt speed m/min 4,5/9 4,5/9 4,5/9 4,5/9



159

SANDYA 1 S3

Automatic widebelt sander



sandyaadvantages

toptech

“MESAR” SECTIONAL PAD:THE BEST FINISH WITH ANY MATERIAL.Higher quality results due to the special shape of the sectorsthat allows the operator to intervene “softly” but also in an“aggressive” way, simply by varying the working pressure.The setting of the pad position and the possibility of usingfoils of different thicknesses increases its versatility.

AUTOMATIC TABLE POSITIONING:

PRACTICALITY AND PRECISION TOGETHER.The automatic detection of the work piece thickness allowsprecise machining at all times and without the risk of operatorerror. The decimal setting of this system also allows settingthe work depth independently of the material.

“LOGIC SC” ELECTRONIC PROGRAMMER:EASILY AVOIDING MISTAKES.Simple and intuitive, allowing the operator to set all processingparameters in sequence and then launch them with the touchof a button. The possibility to store various work programsto retrieve the machine settings most commonly usedmakes it ideal even for unskilled operators.



161

COMPACT TO PROVIDE MORE FLOOR SPACE.The very much reduced size of all Sandya wide belt sanders

simplifies their positioning in the workshop, while maintainingthe performance and production potential of the sanders.

“SYSTEM FIVE”:1 GROUP , 5 TYPES OF WORK.Maximum versatility and extremely compact machine sizewith the possibility to run different processes ranging fromcalibration to sanding with only the use of the systemfive group.sandya system five

toptech

DIAMOND-SHAPED BELT:NO SLIPPING OF THE WORK PIECES.The special rubberised diamond-shaped profile provides thebest traction surface for the work piece and the increasedsupport area also ensures maximum stability.

Solution Rev00 Giu12 ING 00L0059103L-Small

Documents

Transcript of Solution Rev00 Giu12 ING 00L0059103L-Small