Inside Automation, Issue 2, 2012

issue 2 2012

Transcabopen slot

cable ductingpage 2

New Linearbrochurefrom Motorspages 6 & 7

ValCo range oflevel switchesand sensorspage 3

OEM can now offer thecomplete range of Transcabopen slot cable ducting that iseasily snapped to length without theneed for a hacksaw or blades.

The trunking has 6mm gaps and 6.5mm fingers withunique support ribs for a rigid construction especially onthe taller profiles. The base and rounded end fingers areinternally pre scored and can be removed at support ribor base level making it easy to break to length andcreate T-junctions without the need for a saw.

Covers easily clip into place and have raised lines eitherside making it easy to align labels.

OEM INSIDE AUTOMATION 2012-2 WWW.OEM.CO.UK2

DDeeddiiccaatteedd ccuussttoommeerrssuuppppoorrtt tteeaammWe believe that one of the reasons ourcustomers keep coming back to us is thatwe try to make doing business as easy,efficient and friendly as possible. To facilitate this we have a dedicatedcustomer support team. They handlemost orders, basic queries and returnsand can also give updates on theprogress of your order. You can reachthem by dialling our main number 0116 2849900 or emailing their dedicatedaddress [email protected]

We are always looking for ways toimprove our products and service so withthis in mind please send any feedback orcomments you may have to me [email protected] ortelephone me directly on 0116 2846701.

In our last issue of Inside Automation weran a level products survey where allrespondents were entered into a draw towin an iPod Nano. I’m pleased toannounce the lucky recipient was Mr Richard Murden of Hiden Isochema.Congratulations Richard and we hope youenjoy it!

Richard ArmstrongManaging Director

MD’scomment

Publisher OEM Automatic LtdEditor Anne Massey

Graphic design Byrån + Yarwood Associates

Printer NovaprintCirculation 17,102

Contact details OEM Automatic LtdWhiteacresCambridge RoadWhetstone, LeicesterLE8 6ZG

Tel 0116 2849900Fax 0116 2841721

Internet [email protected]

Cable trunking iseasy to cut with nohacksaw required

For more information please contact Anthony Wrighton on 0116 2849900 or e-mail [email protected]

• No hacksaw / blades required for cutting• Unique support ribs give rigidconstruction

• Cutting tool facilitates break to lengthfeature

• Clip on cover with marking alignment• UL & CSA approved S

PECIAL OFFER FREE CUTTING TOOL

Place a first order for minimum£500 net spend on Transcabproduct and receive a free supportbar cutting tool!Offer limited to one tool per customerPromotion valid on purchases until 29th June 2012.Minimum spend level exclusive of vat.Subject to availability.Terms & conditions apply.

Remove reinforcementsupport ribs at requiredlength

Simply snap to length no hacksaw or bladesrequired

Snap out fingers to quickly and easily create T-junctions

OEM INSIDE AUTOMATION 2012-2 WWW.OEM.CO.UK 3

Pressure & Flow add levelsensing products to range

OEMAutomatic is pleased to announcethe addition of the ValCo range of levelswitches and sensors to their portfolio ofproducts. This perfectly complements ourexisting range of products for themeasurement of pressure, flow andcontrol of liquids and gases.

Valco srl is a well established andrespected Italian manufacturer offering afull range of liquid level products that cansolve nearly every level switching orsensing requirement.

Level switches:• Vertical and side wall mount• Various materials; plastic/stainless steel• Choice of float size and material• Switches: normally open or normally

closed options and change overavailable

• Stem lengths up to 6 metres• Up to 6 separate switch points• ATEX versions

Level sensors:• Stem lengths up to 6metres• Various output options• Float and Stemmaterials in plastic,

brass and stainless steel• ATEX option available• Float size andmaterial to suit application• Conductive and capacitive level

detection technologies

For standard products or customisedsolutions please contact the Pressure &Flow business area with your level sensingrequirements.

For more information please contactNeil Bailey on 0116 2849900or e-mail [email protected]

For more information please contactGareth Ford on 0116 2849900or e-mail [email protected]

Rugged Micro-change® connectors andreceptacles provide a high-pin-densityM12 solution and are ideal for use inharsh commercial and industrialenvironments.

Micro-change® connectors are designed towithstand harsh, industrial and weatherenvironments; their superior quality assuresa very reliable connection for controlelements in automated equipment.

These high quality connectors allow fastand simple replacement of sensors,encoders, switches and other input andoutput devices in industrial machinery.

Available in 2, 3, 4, 5, 8 and 12-pole IECcompliant configurations, single- and dual-keyway designs with straight and 90° maleand female connections these versatileMicro-change® connectors help to increaseoverall plant production.

Features:• Gold over palladium/nickel platingdesign contacts

• IP68 moisture resistant construction• Anti-vibration feature prevents thecoupler from loosening even underextreme vibration

• M12 design meets industry standardIEC specifications

Please request our ConnectorGuide detailing our stock items forimmediate delivery.


The new Safe Box fromConta-Clip offers you aquick & easy protectionsolution for din rail mountedterminal blocks andcomponents.

The Safe Box effectively preventsunauthorised access to terminals and isideal for applications on the metering sideof a power distribution system wherepotential damage could be caused byincorrect configurations.

The side panels are directly mounted to thedin rail and completely enclose theterminals or components within. There arethree sealing location points enabling you touse security wires or tabs to secure the lidin place.

When the transparent lid is removed thesliding mechanism of the two halves canextend to a further 16mm. This makesmaintenance work or the changing of theterminals or components much easier.

• 3 sealing locations• Transparent lid• Locks to TS35 din rail• Suit RK & SRK terminals• Quick & Easy installation• 91 x 101 68.5mm (LxWxD)

Brad® Micro-change®

(M12) connectors

For more information please contactPaul Adkins on 0116 2849900or e-mail [email protected]

Protect with ‘RK-Safe Box’



For more information please contact Paul Adkins on 0116 2849900 or e-mail [email protected]

GRP enclosures ideal fordemanding environments Ensto have extended their product offer with theintroduction of a new family of GRP (glass reinforcedpolyester) wall mounted enclosures.

GRP is extremely durable with superb temperatureresistance and offers a good alternative to using stainlesssteel in demanding environments. This cost effective solutionis sturdy and uses polyester that is UV resistant, selfextinguishing and halogen free with a high resistance tocorrosion and solvents.

There are 7 standard sizes ranging from 250x300x140mm to600x800x300mm with a plain hinged door or optional polycarbonatewindow. The enclosures are ideally suited to many applications includingmaritime, metering & control, renewable energies, agricultural and water /waste treatment.

GRP can be a difficult material to machine but this is no problem asEnsto can offer a full customisation service to your exact requirements.

• Extremely durable• IP66 protection• IK10 impact rating• Polycarbonate window option• Available in 7 standard sizes• Machining service available

The ND10 is the latest generation power network meter thatoffers a cost effective & high accuracy solution for themeasurement of 3-phase power network parameters.

This device enables you to highlight, control and optimize powerelectronic devices, systems and industrial installations. This in turncan help identify areas where energy consumption can be reducedleading to significant savings in energy costs.

The meter has IP65 front panel protection and is a standard DIN 96size with easy to read 3.5” backlit display. The ND10 can beprogrammed by the front panel or using the free LPconfig software.

The unit comes as standard with two alarm relay outputs and activeenergy pulse output with the option of adding RS-485 if required.The password protection function enables you to lock down thefunctions preventing unauthorised users from changing parameters.

Affordable highaccuracynetwork meter

ND10 features:• Cost effective• Easy setup• Built in kWh meter• IP65• RS-485 option


From Bologna, Italy, MecVel hasproduced high quality linear actuatorsand screw jacks since the 1980’s.

• DC and AC Actuators• Screw jacks• Bevel gearboxes• Electronic drives

• Agricultural machinery• Marine • Renewable energy• Medical• MOD• Nuclear

With over 15 years of experience,TiMotion Technology continues todesign and manufacture actuatorsolutions for today’s demanding market.

• Linear actuators• Control boxes • Handsets• Power supplies• Accessories

• Medical• Agricultural• Renewable energy• Building Automation• Furniture

New overview for linear solutions


To receive your free copy, please fill in the fax form on the back cover or contact usdirectly on 0116 2849900 or email [email protected]

With production and offices throughoutthe world, the Japanese company THK is a world leader in high qualitymechanical guide solutions.

• High quality precision manufactured• Linear guides• Rotary guides• Motor driven options

• Industrial machinery• Medical • Robotics• Agricultural• MOD

Based in Victoria, BC, Canada, Firgellimanufacture a range of compact costeffective linear actuators for manyapplications.

• Miniature linear actuators• Potentiometer or limit switch control• Universal drive board• Full range of accessories

• Industrial machinery• Medical• Defence• Toys


30 years partnershipwith Baco control gear

Control & Signalling Devices• Excellent modularity & wide range ofoptions

• IP66 with IK05 impact rating• Ergonomic design with optimiseddimensions

• LED blocks with 100,00 hours lifetime• Contact blocks with 4 connectionoptions including new push fit

Cam Switches• Current ratings from 10 to 250A• Over 50,000 schemes available• Panel or enclosure mounted• Widest choice of legend plates & handles• Metal shaft capable of withstanding morethan one million operations

• Custom cam switches delivered in 24 hours

Switch Disconnectors• Modular design, simply snap onadditional contacts

• Panel or DIN rail mount• Clutch drive with door interlock shroudoption

• Enclosure mount with IP66 ingressprotection

Baco is one of the main suppliers to the OEM group and this year we celebrate a 30 year partnership.

Baco is a specialist manufacturer of control and signalling devices as well as cam switchesand switch disconnectors. Their products offer a modern ergonomic design withexceptional reliability. All conform to the latest European directives and have internationalapprovals such as UL & CSA. To reinforce their commitment to quality Baco offer a 10 yearguarantee on all new purchased products!

For more information please contactAnthony Wrighton on 0116 2849900or e-mail [email protected]

Plug & Play –the easy way

For more information please contactPaul Adkins on 0116 2849900 or e-mail [email protected]

These touch safe terminals and connectorscan be individually coded, fitted with snap-on locking latches and have the option ofadditional strain relief clamps for the cables.

The connectors are made up by justsnapping together the number of terminalsand plug modules required for yourapplication. They are available in rail mountor as a free coupling module.

Using the tension spring cable connectiontechnology you can be assured of a reliableand maintenance free solution.

• Ratings – 500V, 24A • 2.5mm cable size• Cross connectable plugs• Touch-safe construction• TS15/TS35 & coupler versions

The new ZST-2.5 plug-in connection system isdesigned to speed up installation and reducewiring errors in all types of applications.

Reer’s new heated cylindrical protectivehousing (with built in light curtain) isdesigned for use in severe conditionsincluding rain, sun and environmentsthat generate condensation or extremecold.

There is also a version specifically foruse in food applications.

• Ideal for external use• Resistant to pressurised water jets,highly humid environments, coldtemperatures, saline environments andfood applications

Features:• IP69K degree of protection• Operating temperature from -25° to+55°

• Integrated anti-condensation systemthrough GORE™ vent

• Thermostatic heating control system


IP69K safety light curtains – left in the cold!

For more information please contactMartin Illston on 0116 2849900 or e-mail [email protected]

For more information please contactNeil Bailey on 0116 2849900 or e-mail [email protected]

Safety level:

Type 2SIL 2 – SILCL 2 PL d – Cat. 2

Safety level:

Type 4SIL 3 – SILCL 3 PL e – Cat. 4

❅❄❆❅❉✽❄❆❇❈✼

The changes will make the already versatilesensor suitable for more arduous andchallenging applications found in industrialand process markets.

Applications include static differentialpressure measurement and control incombustion chambers and clean rooms.Also condition and filter monitoring in highpressure hydraulic systems or anyapplication for liquid or gas requiring reliabledifferential pressure measurement evenwith aggressive media.

• Silicon on Sapphire sensing technology(SoS)

• Pressure ranges 250mbar - 200 bar DP• 4- 20mA output (13-36vdc supply)• Titanium wetted parts• ATEX certified version available

Improved differentialpressure sensor launched!

In line with their continuous improvement programme, Ellison Sensors have re-engineered the PR3200 differential pressure sensor to include full SoS (Silicon on Sapphire) sensing technology and Titanium pressure ports.


50 years of peakperformance relays

Releco is very well known as a leading brand of industrial plugin relays thanks to their high quality, long lifetime andinnovative “fully featured” product range.

In 2006 the Swiss company, Comat, acquired Releco andintegrated them into their international organisation. Bothcompanies benefit from each other’s experience and knowhow meaning the latest product range has more to offer thanever before.

Releco is a company specialised in the design anddevelopment of relays, sockets and accessories for industrialapplications.

Releco was founded in 1962 and currently produceover 5 million relays per year at their factory inMadrid with full control over all processes.

• Design & development• Laboratory• Tooling• Metal stamping• Plastic injection moulding• Coil winding• Contact mounting• Final assembly• 100% Test & quality control

Releco has been one of the main suppliers to the OEM group almostfrom the start and this year celebrates a 50 year anniversary.

Built in retaining clip

Marking of coil voltage

Twin mechanical flag

Coil LED indication

High isolation between contacts

3 function test button Timer module

Marking label on socket & relay

Bridge bars for coil & contacts

Touch proof screw terminals

Ergonomic grip for easy removal

For more information please contact AnthonyWrighton on0116 2849900 or e-mail [email protected]


Encoders for direct drives withnew mounting solutionKuebler has developed an innovative solution for mountingabsolute single turn encloders on gearless drives (directdrives). Its great advantage compared to the mounting versionsused until now lies in its easy and fast mounting thanks to aninnovative torque stop. A Set button allowing a fast start-upand the open absolute BiSS interface, including an incrementalSinCos track, are further highlights of these encoders.

This solution offers reduced manufacturing time and ease ofmaintenance. The installation is easy since the encoder isequipped with a tapered shaft ensuring a high accuracy and directcoupling. The tapered shaft is fastened on to the drive shaft by acentral screw.

Features:• Single turn resolution up to max. 17 bits with BiSS-C or SSI interface

• Optional zero point setting button for an easy start up• Incremental SinCos track with 2048 pulses/revolution• Quick mounting thanks to the innovative torque stop• Tangential cable outlet for optimal connection

For more information please contact Gareth Ford on 0116 2849900 or e-mail [email protected]


Plug in solid state relays inelectromechanical relaypackage Crydom’s proven solid state technology offers substantial

performance advantages over electromechanical relays includingsignificantly greater lifetime expectancy, silent operation and highshock / vibration resistance. Contactless high speed switchingwithout any contact bounce or arcing also eliminates the associatedproblems of electrical noise.

AC output types incorporate Crydom’s proven back to back SCRtechnology while DC output types utilise high efficiency FETs, bothtechnologies ensure lowest possible on state power dissipation andhigh surge current ratings. This makes the ED series an ideal choicefor applications such as small motors, solenoids, heaters andlamps.

• Industry standard plug in package• 3 & 5A AC output (24 to 280VAC)• 5A DC output (1 to 80VDC)• DIN rail mount or PCB sockets• Various control input voltage options

The ED series of solid state relays are designed to easily replaceindustry standard single pole plug in electromechanical relays.

�� Reer Safety Guide

Whiteacres, Cambridge Road, Whetstone, Leicester LE8 6ZG, UK. Tel: 0116 284 9900 Fax: 0116 284 1721www.oem.co.uk e-mail: [email protected]

COMPANY NAME: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contact Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Position: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Postcode: . . . . . . . . . . . . . . . . . . . . .Country: . . . . . . . . . . . . . . . . . . . . .

Tel: . . . . . . . . . . . . . . . . . . . . . . . . . .Fax: . . . . . . . . . . . . . . . . . . . . . . . . .

Email: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Please remove me from your mailing list

�� Molex Connector Guide �� Ensto Cubo �� Crydom �� Lumel

�� Company Profile �� Pressure & Flow �� Machine �� Motors Overview

Please request a copy of our catalogues

I would like the NewMotors Linear Overview

Inside Automation, Issue 2, 2012

Documents

Transcript of Inside Automation, Issue 2, 2012