Flexiform Revit User Guide: Jot Combination Storage
-
Upload
flexiform-business-furniture -
Category
Documents
-
view
214 -
download
1
description
Transcript of Flexiform Revit User Guide: Jot Combination Storage
JOT COMBINATION STORAGE
REVIT USER GUIDECompatible with Revit 2012 onwards
Version 1.0
Jot Combination Storage/ Hinged Door & Drawers4 997mm or 1912mm high4 800mm or 1000mm wide
4 MFC top (not included on all products)4 See specification guides for full product variants
Jot Combination StorageRevit Blocks
Cabinet-Flexiform-Jot-Combination-
1302_High-2x12_Inch_Drawer_And
_Hinged_Doors.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-3x12_Inch_Drawer_And
_Hinged_Doors.rfa
Cabinet-Flexiform-Jot-Combination-
1607_High-1x6_2x9_1x12_Inch_
Drawer_And_Hinged_Doors.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-4x12_Inch_
Drawer_And_Hinged_Doors.rfa
Cabinet-Flexiform-Jot-Combination-
1607_High-3x12_Inch_Drawer_And
_Hinged_Doors.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-2x6_1x12_Inch_Drawer_And
_Hinged_Doors.rfa
Jot Combination Storage/ Hinged Door & Drawers with Individual Locking Drawers
Cabinet-Flexiform-Jot-Combination-
1912_High-1x12_Inch_Drawer_And
_Hinged_Doors(individual_Locks).rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-3x12_Inch_Drawer_And_
Hinged_Doors(individual_Locks).rfa
Jot Combination Storage/ Flippers & Drawers
Cabinet-Flexiform-Jot-Combination-
997_High-2x12_Drawer_1x12_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1607_High-2x15_Drawer_2x15_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-1x12_2x15_Inch_
Drawer_2x15_Inch_Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1302_High-2x12_Inch_Drawer_2x-
Shelves.rfa
Cabinet-Flexiform-Jot-Combination-
1073_High-2x12_Drawer_1x15_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1607_High-2x12__And_4x6_Inch_
Drawer_1x12_Inch_Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-3x12_1x6_Inch_Drawer_1x12_
Inch_Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1302_High-2x12_Inch_Drawer_2x-
Shelves(Individual_Locks).rfa
Cabinet-Flexiform-Jot-Combination-
1302_High-1x12_Drawer_3x12_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1607_High-3x12_Drawer_2x12_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-3x12_Drawer_3x12_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1302_High-3x12_Drawer_1x12_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1607_High-4x12_Drawer_1x12_Inch_
Flipper.rfa
Cabinet-Flexiform-Jot-Combination-
1912_High-4x12_Drawer_2x12_Inch_
Flipper.rfa
Jot Combination Storage/ Open Shelving and Drawers
Jot Combination Storage/ Jot Carcass
Cabinet-Flexiform-Jot-Carcass_Only-
997_High.rfa
Loading the components into a project.
Flexiform Flexilink Racking blocks are standard family components. After downloading the file, save it locally, then load into your project using the Insert – Load Family Tab.
1. In the project folder that you are working in, go to ‘Insert Tab/ Load Family’ … Select the component from your saved location as shown below:
2. Navigate to the location of the saved Flexilink Racking folder. Select the desired family to load from appropriate folder.
Using the Flexilink Racking component families.
Flexilink Racking is a range consisting of a vast number of components. For ease of use it has been grouped into a starter and extension bay that can be used for visual reference in your model. For a specific arrangement containing product codes, please contact Flexiform Customer Services.
1. Flexilink Racking folder contains two families-‐ a starter and an extension bay. Load in both families into your project. Place a starter bay on the ground plane, type in the required width, height and depth.
2. Note-‐ Sizes available are listed in the component properties. If incorrect value is entered, an error message will appear in floor plan view.
LOADING THE COMPONENTS INTO A PROJECT
MATERIALS
Flexiform Jot Combination Storage blocks are standard family components. After downloading the file, unzip contents and move it to your project folder, then load into your project using the Insert – Load Family Tab.
In the project folder that you are working in, go to ‘Insert Tab/ Load Family’… Select the component from your saved location as shown below:
Navigate to the location of the saved Flexiform Jot Combination Storage folder. Select the desired family to load from appropriate folder.
Flexiform MFC Top materials have been created using bespoke finish images. There is a folder called “Materials JPEG” included in the download of Jot Combination Storage. Save it locally together with downloaded files. When using an MFC Top material, re-link the image to appropriate file in the materials folder.
More files are available to download at www.bimstore.co.uk/flexiform For help and support please contact 01274 706206.
1.
2.
BradfordFlexiform1392 Leeds RoadBradfordWest YorkshireBD3 7AE
t: 01274 706206f: 01274 665760
LondonFlexiform1st Floor45 Gee StreetLondonEC1V 3RS
t: 0207 226 9955f: 0203 301 0435
ScotlandFlexiformUnit 7 Bloom FarmMain StreetLivingston VillageWest LothianEH54 7AF
t: 01506 417410f: 01506 418970
www.flexiform.co.uk
Company Registration Number 02542123