Flexiform Revit User Guide: Freestor Tambours

5
FREESTOR TAMBOURS REVIT USER GUIDE Compatible with Revit 2012 onwards Version 1.1

description

Download Flexiform's BIM blocks at www.bimstore.co.uk/manufacturers/flexiform Version 1

Transcript of Flexiform Revit User Guide: Freestor Tambours

Page 1: Flexiform Revit User Guide: Freestor Tambours

FREESTOR TAMBOURSREVIT USER GUIDE

Compatible with Revit 2012 onwards

Version 1.1

Page 2: Flexiform Revit User Guide: Freestor Tambours

Freestor Tambours4 Tambour front4 Seperate block for 800mm and 1000mm wide

4 Multiple finishes4 See specification guides for full product variants

Freestor TamboursRevit Blocks

800mm:

Cabinet-Flexiform-Freestor_

Tambour_695_High_FS069508_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_695_High_FS069510_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1017_High_FS101708_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1017_High_FS101710_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1322_High_FS132208_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1322_High_FS132210_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_715_High_FS071508_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_715_High_FS071510_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1090_High_FS109008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1090_High_FS109010_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1490_High_FS149008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1090_High_FS149010_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_720_High_FS072008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_720_High_FS072010_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1110_High_FS111008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1110_High_FS111010_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1677_High_FS167708_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1677_High_FS167710_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_740_High_FS072008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_740_High_FS072010_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1200_High_FS120008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1200_High_FS120010_12.rfa

800mm:

Cabinet-Flexiform-Freestor_

Tambour_1720_High_FS172008_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_1720_High_FS172010_12.rfa

Page 3: Flexiform Revit User Guide: Freestor Tambours

800mm:

Cabinet-Flexiform-Freestor_

Tambour_2007_High_FS200708_12.rfa

1000mm:

Cabinet-Flexiform-Freestor_

Tambour_2007_High_FS200710_12.rfa

Page 4: Flexiform Revit User Guide: Freestor Tambours

Loading  the  components  into  a  project.  

Flexiform  Flexilink  Racking  blocks  are  standard  family  components.  After  downloading  the  file,  save  it  locally,  then  load  into  your  project  using  the  Insert  –  Load  Family  Tab.    

1. In  the  project  folder  that  you  are  working  in,  go  to  ‘Insert  Tab/  Load  Family’  …  Select  the  component  from  your  saved  location  as  shown  below:    

2. Navigate  to  the  location  of  the  saved  Flexilink  Racking    folder.  Select  the  desired  family  to  load  from  appropriate  folder.  

   

Using  the  Flexilink  Racking  component  families.  

Flexilink  Racking  is  a  range  consisting  of  a  vast  number  of  components.  For  ease  of  use  it  has  been  grouped  into  a  starter  and  extension  bay  that  can  be  used  for  visual  reference  in  your  model.  For  a  specific  arrangement  containing  product  codes,  please  contact  Flexiform  Customer  Services.    

1. Flexilink  Racking  folder  contains  two  families-­‐  a  starter  and  an  extension  bay.  Load  in  both  families  into  your  project.  Place  a  starter  bay  on  the  ground  plane,  type  in  the  required  width,  height  and  depth.        

2. Note-­‐  Sizes  available  are  listed  in  the  component  properties.  If  incorrect  value  is  entered,  an  error  message  will  appear  in  floor  plan  view.  

LOADING THE COMPONENTS INTO A PROJECT

MATERIALS

Flexiform Freestor Tambour Storage blocks are standard family components. After downloading the file, unzip contents and move it to your project folder, then load into your project using the Insert – Load Family Tab.

In the project folder that you are working in, go to ‘Insert Tab/ Load Family’… Select the component from your saved location as shown below:

Navigate to the location of the saved Flexiform Freestor Tambour folder. Select the desired family to load from appropriate folder.

Flexiform MFC Top materials have been created using bespoke finish images. There is a folder called “Materials JPEG” included in the download of Freestor Tambour Storage.Save it locally together with downloaded files. When using an MFC Top material, re-link the image to appropriate file in the materials folder.

More files are available to download at www.bimstore.co.uk/flexiform For help and support please contact 01274 706206 or email [email protected]

1.

2.

Page 5: Flexiform Revit User Guide: Freestor Tambours

BradfordFlexiform1392 Leeds RoadBradfordWest YorkshireBD3 7AE

t: 01274 706206f: 01274 665760

LondonFlexiform1st Floor45 Gee StreetLondonEC1V 3RS

t: 0207 226 9955f: 0203 301 0435

ScotlandFlexiformUnit 7 Bloom FarmMain StreetLivingston VillageWest LothianEH54 7AF

t: 01506 417410f: 01506 418970

www.flexiform.co.uk

Company Registration Number 02542123