ECE_M.Tech nit warangal

1

M.Tech. Electronics and Communication Engineering - Scheme and Syllabi

DEPARTMENT OF ELCTRONICS ANDCOMMUNICATION ENGINEERING

RULES AND REGULATIONS

SCHEME OF INSTRUCTION AND SYLLABI

of

M.Tech. Programs

2


NATIONAL INSTITUTE OF TECHNOLOGYWARANGAL 506 004

SCHEME OF INSTRUCTION AND EVALUATION

M.Tech. (Electronic Instrumentation)

I Year I Semester

I Year II Semester

S. CourseCourse Name L T P C

No. No.

1 EC5101 Modern Spectral Estimation 4 0 0 4

2 EC5102 Transducers and SignalConditioning Circuits 4 0 0 4

3 EC5103 Micro Processors andMicro Controllers 4 0 0 4

4 EC5104 Structured Digital SystemDesign 4 0 0 4

5 Elective - I 3 0 0 3

6 EC5105 Transducers and SignalConditioning Laboratory 0 0 4 3

7 EC5106 EDA Laboratory 0 0 3 2

8 EC5107 Micro Controller Laboratory 0 0 3 2

TOTAL 19 0 10 26


No. No.

1 EC5151 Data Acquisition andDisplay Systems 4 0 0 4

2 Elective-II 3 0 0 3

3 Elective-III 3 0 0 3

4 EC5152 PC Based Instrumentation 4 0 0 4

5 Elective - IV 3 0 0 3

6 Elective - V 3 0 0 3

7 EC5153 Advanced InstrumentationLaboratory 0 0 3 2

8 EC5154 PC Based InstrumentationLaboratory 0 0 3 2

9 EC5191 Seminar 0 0 3 2

TOTAL 20 0 9 26

3


II Year I Semester


No. No.

1 EC6192 Comprehensive Viva-voce 0 0 0 04

2 EC6149 Dissertation Part-A 0 0 0 08

TOTAL 0 0 0 12

II Year II Semester


No. No.

1 EC6199 Dissertation Part-B 0 0 0 18

TOTAL 0 0 0 18

Consolidated Credits

Category ISem

IISem

IIISem

IVSem

Total

Core courses 16 08 00 00 24

Electives 03 12 00 00 15

Lab Courses 07 04 00 00 11

Seminar 00 02 00 00 02

ComprehensiveViva-Voce 00 00 04 00 04

Project 00 00 08 18 26

Total 26 26 12 18 82

LIST OF ELECTIVES

S.No. Course No. Course Title

Elective - I EC5111 Quality and Reliability of Electronics SystemsEC5112 Electronic Equipment DesignEC5113 Software Defined Radio

Elective - II EC5161 VLSI System DesignEC5162 Digital Control SystemsEC5163 Analytical Instrumentation

Elective - III EC5164 Advanced Digital Signal ProcessingEC5165 Biomedical InstrumentationEC5166 Advanced Computer Architecture

Elective - IV EC5167 FPGA DesignEC5168 Embedded System and RTOSEC5169 Special Topics in Instrumentation

Elective - V EC5170 Wireless Sensor NetworksEC5171 Advanced Image ProcessingEC5172 Process Control Instrumentation

4


SYLLAB US

M.Tech. (Electronic Instrumentation)

EC5101 MODERN SPECTRAL ESTIMATION 4-0-0 (4)

Introduction, Classical Spectral Estimation, Modern Spectral Estimation: Time series models, Relationshipbetween auto-correlation and the model parameters, AR parameters by Yule-walker, Burg and sequentialestimation methods, Selection of AR model order, MA and ARMA models for power spectrum estimator,Maximum entropy spectral estimator, Minimum variance spectral estimator. Adaptive Filters: Introduction,Search Techniques, LMS, RLS, NRLS algorithm, Applications.

Reading:

1. J.G.Proakis: DSP Principles, Algorithms and Applications, PHI,1992.

2. Steven M.Kay: Modern Spectral Estimation, Theory and Applications, PHI, 1988.

3. Simon Haykin: Adaptive Filters, 4th Edition, Pearson Education Asia, New Delhi, 2002.

EC5102 TRANSDUCERS AND SIGNAL CONDITIONING CIRCUITS 4-0-0 (4)

Generalized Performance Characteristics of Instruments, Transducers for Motion and DimensionalMeasurements, Force Measurement, Pressure Measurements, FlowMeasurement, Temperature Measure-ments, Introduction to Signal Conditioning Circuits, Bridge Circuits, Operational Amplifiers, Isolation Amplifiers,PLLs, Instrumentation Amplifiers, Grounding and Shielding.

Reading:

1. Doeblin, E.O, Measurement Systems - Application and Design, 4th Edition, McGraw Hill, 1990.

2. David F Stout and Milton Kaufman: Handbook of Operational Amplifier Circuit Design, McGraw Hill,1976.

EC5103 MICROPROCESSORS AND MICROCONTROLLERS 4-0-0(4)

Microcomputer Organization, Microcomputer Systems, 80386 Processor, Memory Management,Microcontrollers, Introduction to ARM and Intel Atom processor architecture, 80196 Microcontrollers Family:Architecture, instruction set, pin out, memory interfacing. Case study: Industrial Applications ofMicrocontrollers.

Reading:

1. Barry B. Brey: Intel Microprocessors, Architecture, Programming and Interfacing - 8086/ 8088, 80186,80286, 80386 and 80486, PHI, 1995.

2. Muhammad Ali Mazidi and Mazidi: The 8051 Microcontrollers and Embedded Systems, PHI, 2008.

3. Intel and ARM Data Books on Microcontrollers.

EC5104 STRUCTURED DIGITAL SYSTEM DESIGN 4-0-0(4)

Digital system design process, EDA tools and design viewpoints, Hardware description languages: VHDLand Verilog modeling concepts, Building blocks for digital systems, Design methodology - Synchronoussystems, Algorithmic State Machine charts. Implementation issues, Power Distribution and noise in digitalsystems, Timing and Signal conventions and circuits, Introduction to Programmable logic devices.

Reading:

1. William Fletcher: An Engineering Approach to Digital Design, Prentice-Hall India,1980.

2. William J Dally and John W Poulton, Digital Systems Engineering, Cambridge University Press, 1998.

3. Jayaram Bhaskar A, VHDL Primer, Prentice-Hall India,1999.

EC5111 QUALITY AND RELIABILITY OF ELECTRONIC SYSTEMS 3-0-0 (3)

Introduction, Concepts of Reliability, Failure Analysis Technique, System Reliability and Modeling, Simulationand Reliability Prediction, Maintainability and Availability, Quality Reliability and Safety.

5


Reading:

1. A.K.Govil: Reliability Engineering, TMH, 1983.

2. B.S.Dhillion: Reliability Engineering in Systems Design and Operation, Van Nostrand Reinhold Co.,1983.

3. A.E.Green and A.J.Bourne: Reliability Technology, Wiley-Interscience, 1972.

EC5112 ELECTRONIC EQUIPMENT DESIGN 3-0-0 (3)

From Requirement to Product, Electronic Product Design, Thermal Design of Electronic Equipment,Electromagnetic Interference and Design for Electromagnetic Compatibility, Electronic Design AutomationTools.

Reading:

1. Karl T. Ulrich and Steven D. Eppinger: Product Design and Development, MGH, 2003.

2. John R. Lindberg: Product Design and Manufacturing, PHI, 1990.

3. Thermal Design of Electronic Equipment- Monogram by CEDT, IISc. Bangalore.

EC5113 SOFTWARE DEFINED RADIO 3-0-0 (3)

Software radio concepts, Design principles, Receiver front end topologies, Noise and Distortion in RF chain,Common ADC and DAC architectures, Object oriented software radios, Direct digital synthesizers, CORDICalgorithm, Pulse shaping and interpolation filters, DDS with tunable DSM, Transmitter and receiverarchitectures, Case studies in software radio design.

Reading:

1. Paul Burns, Software Defined Radio for 3G, Artech House, 2002.2. Tony J Rouphael, RF and DSP for SDR, Elsevier Newnes Press, 2008.3. Jouko Vanakka, Digital Synthesizers and Transmitter for Software Radio, Springer, 20054. P Kenington, RF and Baseband Techniques for Software Defined Radio, Artech House, 2005

EC5105 TRANSDUCERS AND SIGNAL CONDITIONING LABORATORY 0-0-4 (3)

Study Experiments: Tektronix TDS 1002 Oscilloscope, APLAB 15MHz Dual Trace Oscilloscope, GoldStarOscilloscope 9040D. Experiments using Anshuman Kit: Temperature Measurement, DisplacementMeasurement, Speed Measurement. Experiments using Op-amps: Inverting and Non Inverting Amplifier,Integrator and Differentiator, Astable and Monostable Multivibrator, RC Phase shift Oscillator, Wein BridgeOscillator, Second order Low Pass Butterworth Filter, Precision Rectifier, Instrumentation Amplifier, Astablemultivibrator using 555.

EC5106 ELECTRONIC DESIGN AUTOMATION LABORATORY 0-0-3 (2)

Design of Booth's Multiplier, Design of 4 Bit ALU, Design of 32 Bit ALU using ripple carry and carry lookahead logic, Design of counters and shift registers, Design of MIPS processor. Design of Washing. MachineController using VHDL and Verilog.

EC5107 MICROCONTROLLER LABORATORY 0-0-3 (2)

Introduction to microcontroller 8051 and microcontroller kit, Simple arithmetic program, Glowing LED program,Data transfer between ports, Programs on Interrupts and Timer, Square wave generation, Interfacing LCDand related programs, Serial communication program using UART, ADC 0804 interfacing programs.

EC5151 DATA ACQUISITION AND DISPLAY SYSTEMS 4-0-0 (4)

Data Loggers and Data Acquisition Systems: Data acquisition systems - configurations - components.Analog multiplexers and sample and hold circuits - specifications and design considerations. DACs:Specifications - Characteristics,Types of DACs, Interfacing of DACs to microprocessors and PCs. ADCs:Specifications - Characteristics, Types of ADCs, Interfacing of ADCs to microprocessors and PCs. HybridDAS: Schematic diagram - configurations - specifications. Error Budget of DACs and ADCs: Error sources,error reduction and noise reduction techniques in DAS. Error budget analysis of DAS. Case study of a DACand an ADC. Display Systems: LCD Flat panel displays, Storage CRT displays, Plasma displays, ProjectionSystems and their interfacing.

6


Reading:

1. E.R. Hnatek: Users Handbook of D/A and A/D Converters, Krieger Pub Co, 1988.

2. H. Schmid: Electronic Analog/Digital Converters, 1970.

3. G.B. Clayton: Data Converters, John Wiley & Sons, 1982.

EC5161 VLSI DESIGN 3-0-0 (3)

MOS Transistor Theory, CMOS Processing Technology, Circuit Characterization And Performance Estimation,CMOS Circuit And Logic Design: CMOS Logic Gate Design, CMOS Testing, CMOS Subsystem Design.

Reading:

1. Pucknell and Eshraghian: Basic VLSI Design, Prentice Hall College Div, 1994.

2. Neil H.E. Weste and Kamran Eshraghian: Principles of CMOS VLSI Design, Addison Wesley, 2010.

3. Wayne Wolf: Modern VLSI Design, Pearson Education Asia, 2002.

EC5162 DIGITAL CONTROL SYSTEMS 3-0-0 (3)

Introduction, State Variable Techniques, Stability of Digital Control Systems, Time-Domain Analysis, FrequentlyDomain Analysis, and Design of Digital Control Systems, Case studies.

Reading:

1. Benjamin C. Kuo Holt: Digital Control Systems, Rinehart and Winston, Inc, 1980.

2. M. Gopal: Digital Control Systems, New Age Int., 1992..EC5163 ANALYTICAL INSTRUMENTATION 3-0-0 (3)

Review of the basic principles of molecular spectroscopy, Ultraviolet and visible spectrophotometry, Flameemission spectroscopy, Infra red spectrophotometry, Gas chromatography, pH and Ion selective potentiometry:Introduction to continuous on-line process control - on-line potentiometric analyzers - Automatic chemicalanalyzers- Automatic elemental analyzers.

Reading:

1. Willard, Merrit, Dean and Settle: Instrumental Methods of Analysis, 6th Edition, CBS Publishers, 1996.

2. R. S. Khandapur: Hand Book of Analytical Instruments, Tata McGraw Hill, 1989.

EC5164 ADVANCED DIGITAL SIGNAL PROCESSING 3-0-0 (3)

Transform Techniques. Multirate Signal Processing, Linear Prediction and Optimum Linear Filters, LeastSquare Methods for System Modeling and Filter Design Adaptive Filter Theory, Digital Signal Processors,Signal Analysis with Higher Order Spectra.

Reading:

1. JG Proakis, DG Manolakis: DSP - Principles, Algorithms and Applications, 3rd Edition, PHI Private Ltd.,2001

2. S. Haykin: Adaptive Filter Theory, 2nd Edition, Prentice Hall, 2001.

3. Janes V.Candy: Signal Processing, The Model Based Approach, McGraw-Hill Book Company, 1987.

EC5165 BIO MEDICAL INSTRUMENTATION 3-0-0 (3)

Basics of Biomedical Instrumentation, Biomedical Transducers, Biomedical Signal Measurement Basics,Cardiovascular Measurements, Medical Imaging Systems: Radiography, MRI, Computed Tomography,Ultrasonography Noninvasive Instrumentation: Temperature Measure-ments, Principles of UltrasonicMeasurements, Ultrasonics and Its Applications in Medicine. Biotelemetry: Introduction to Biotelemetry,Physiological Parameters Adaptable to Biotelemetry, Biotelemetry System Components, Implantable Unitsand Applications of Telemetry in Patient Care.

Reading:

1. L.A. Geddes and L.E.Baker: Principles of Biomedical Instrumentation, 2nd Edition, Wiley, 1989.

2. L. Cromwell: Biomedical Instrumentation and Measurements, Prentice Hall, 1980.

7


EC5166 ADVANCED COMPUTER ARCHITECTURE 3-0-0 (3)

Parallel computer models, Principles of scalable performance, Hardware technologies, Processors andmemory hierarchy, Pipelining and super scalar techniques, Linear pipeline processors, Non linear pipelineprocessors, Parallel and Scalable architectures, Microprocessors and multicomputers, Microprocessor systeminterconnects.

Readings:

1. Hwang. Kai: Advanced Computer Architecture, 5th Edition, McGraw Hill, 2001.

2. Patterson, David and Hennessey John: Computer Architecture, 3rd Edition, Morgan Kaufmann, 2007.

EC5152 PC BASED INSTRUMENTATION 3-0-0 (3)

Introduction, Hardware Overview, Operating System, Bus Standards, Study of Standard I/O Controller Cards,Additional Hardware, A Case Study.

Reading:

1. Dexter Arthur L., The Microcomputer Bus Structures and Interface Design, Marcel Dekker, 1986.

2. N. Mathivanan: PC Based Instrumentation Concepts and Practice, PHI Learning Pvt. Ltd., 2009.

3. Michel H. Toolay: PC Based Instrumentation and Control, 3rd Edition, CRC Press, 2005.

4. Tom Shanley, Don Anderson: PCI System Architecture, 3rd Edition, Adison Wesley Pub. Co., 1999.

EC5167 FPGA DESIGN 3-0-0 (3)

Architecture vs organization, Design styles, Implementation styles, Design Examples using programmablelogic devices, Design of Universal block. Design of memory, Floating point multiplier, Barrel shifter, Specialpurpose Processors - Xilinx Vertex and Spartan - II; Altera FLEX 10k and other architectures. Design ofparameterized library cells, Implementation and Testing- Xilinx and Altera FPGA based systems. Design -Case study- Actel.

Reading:

1. John V. Old Field, Richrad C.Dorf: Field Programmable Gate Arrays, John Wiley, 1995.

2. Michel John Sebastian Smith: Application Specific Integrated Circuits, Pearson, 1997.

EC5168 EMBEDDED AND REAL TIME OPERATING SYSTEMS 3-0-0 (3)

Introduction to Embedded Computing, Computing, Design example, Embedded system design process,ARM processor, CPU performance, CPU power consumption, Computing Platform and Design analysis,Process and Operating systems, Multiple tasks and multi processes, Context switching, Hardwareaccelerators, Case study.Reading:1. Wayne Wolf: Computers as Components - Principles of Embedded Computer System Design, Morgan

Kaufmann Publisher, 2006.2. David E-Simon: An Embedded Software Primer, Pearson Education, 2007.3. K.V.K.K.Prasad: Embedded Real-Time Systems: Concepts, Design and Programming, Dreamtech Press,

2005.

EC5169 SPECIAL TOPICS IN INSTRUMENTATION 3-0-0 (3)

Introduction to Virtual instrumentation, LABVIEW techniques and programming concepts, Inputs and Outputs,Data transmission Concepts, Telemetry, Distributed Automation and Control systems, SCADA, Current trendsin Instrumentation, MEMS, Calibration and standards, Topics in Intelligent Instrumentation.

Reading:

1. S. Sumathi, Surekha: Labview Based Advanced Instrumentation Systems, Springer Publications, 2007.

2. Handouts from web sources.

8


EC5170 WIRELESS SENSOR NETWORKS 3-0-0 (3)

Sensor networks, Advantages and applications, Localization and Tracking, Networking sensors, Clusteringand Time Synchronization, Sensor tracking and Control, Sensor networks, Node hardware, Node levelsoftware, Operating systems, Practical sensor networks, Taxonomy of routing techniques, Transport layerand Security protocols.

Reading:

1. F. Zhao, C. Guibas: Wireless Sensor Network, Morgan Kaufmann, 2001.

2. Mohmmad Illyas, Imad Mahgoub; Hand book of Sensor Networks, CRC Press, 2005.

EC5171 ADVANCED IMAGE PROCESSING 3-0-0 (3)

REVIEW OF: Digital image representation, Fundamental steps in image processing, Elements of digitalimage processing systems. Digital Image Fundamentals, Image Enhancement, Image Restoration,Morphological Image Processing, Image Compression, Image Segmentation, Representation and Description,Recognition and Interpretation.

Reading:

1. Rafael C.Gonzalez and Richard E.Woods: Digital Image Processing, Addison Wesley PublishingCompany, 2010.

2. Rafael C.Gonzalez, Richard E.Woods, L Eddins: Digital Image Processing using MATLAB, Pearson,2004.

EC5172 PROCESS CONTROL INSTRUMENTATION 3-0-0 (3)

Introduction To Process Control, Mathematical Modeling of Chemical Processes, Dynamic Behavior ofSystems, Controller Principles, Analog Controllers, Control System Instrumentation, Dynamic Behavior ofClosed Loop Control Systems, Controller Design, Controller Tuning, Feed Forward and Ratio Control,Advanced Control Strategies, Supervisory Control, Digital Computer Control.

Reading:

1. Dale E Seborg etal,: Process Dynamics and Control, John Wiley & Sons, 1989.

2. Donald R.Coughanowr: Process Systems Analysis and Control, 2nd Edition, McGraw Hill, 1991.

3. Curtis D. Johnson: Process Control Instrumentation Technology, 7th Edition, Pearson Education, 2003.

EC5153 ADVANCED INSTRUMENTATION LABORATORY 0-0-3 (2)

Lab VIEW and NI ELVIS, Lab VIEW based experiments on NI ELVIS Kits, Mini Project.

EC5154 PC BASED INSTRUMENTATION LABORATORY 0-0-3 (2)

Instrument controller using HP 488.2 controller, HP 34970A data acquisition systems/switch, Arbitrarywaveform generator, Process control simulator PCS327, Tektronix dual trace oscilloscope - GPIB interface,HP34401A multimeter - GPIB interface, HP54600 oscilloscope-GPIB interface, Keithley 2000 multimeter-GPIB interface, Investigation of positional accuracy using robot controller, Experiments using DAC08 andADC08 IC's.

9


I Year II Semester


No. No.

1 MA5017 Computational Techniquesin Microelectronics 3 0 0 3

2 EC5201 Device Modeling 3 0 0 3

3 EC5202 Digital IC Design 4 0 0 4

4 EC5203 Analog IC Design 4 0 0 4


6 Elective - II 3 0 0 3

7 EC5204 Analog IC DesignLaboratory 0 0 6 4

8 EC5205 Digital IC DesignLaboratory 0 0 3 2

TOTAL 20 0 9 26


No. No.

1 EC5251 Testing and Testability 3 0 0 3

2 EC5252 Mixed Signal Design 4 0 0 4

3 EC5253 RF IC Design 3 0 0 3

4 Elective - III 3 0 0 3



7 EC5254 Mixed Signal Design Laboratory 0 0 6 4

8 EC5255 Physical Design AutomationLaboratory 0 0 3 2

9 EC5291 Seminar 0 0 3 2

TOTAL 19 0 12 27

M.Tech. (VLSI Desgin)

I Year I Semester

10


II Year I Semester


No. No.



TOTAL 0 0 0 12

II Year II Semester


No. No.


TOTAL 0 0 0 18

Total Number of Credits 83

Credit Structure

Category ISem

IISem

IIISem

IVSem

Total

Core courses 14 10 00 00 24

Electives 06 09 00 00 15

Lab Courses 06 06 00 00 12


Seminar 00 02 00 00 02

Project 00 00 08 18 26

Total 26 27 12 18 83

Consolidated Credits


Elective - I EC5211 Microchip Fabrication TechniquesEC5212 Cleanroom Technology and MaintenanceEC5213 ULSI Technology

Elective - II EC5214 VLSI DSP ArchitecturesEC5215 Hardware/Software Co-designEC5216 Hardware Description Languages

Elective - III EC5261 FPGA DesignEC5262 Full Custom DesignEC5263 ASIC System Design

Elective - IV EC5264 Low Power VLSI DesignEC5265 Ga As TechnologyEC5266 Formal Verification

Elective - V EC5267 CAD for VLSIEC5268 MEMS and MicrosystemsEC5269 Physical Design Automation

11


M.Tech. (VLSI Design)

MA5017 COMPUTATIONAL TECHNIQUES IN MICROELECTRONICS (3-0-0) 3

Linear and non-linear circuit simulation techniques, Numerical solution of differential equations-FEM, FVMand FDM, Grid generation, Error estimates, Transient and small signal solutions, Applications to device andprocess simulation, Layout algorithms, Yield estimation algorithms, Symbolic analysis and Synthesis ofAnalog ICs, Introduction to physical design.

Reading:

1. L.O.Chua And P.M.Lin, Computer Aided Analysis of Electronic Circuits: Algorithms and ComputationalTechniques, Prentice Hall, 1975.

2. L.Pallage, R.Rohrer And C.Visweswaraiah, Electronic Circuit and System Simulation Methods, McGrawHill, 1995.

3. Naveed Shewani, Algorithms for VLSI Physical Design Automation, 3rd Edition, Kluwer Academic, 1999.

EC5201 DEVICE MODELLING (3-0-0) 3

Review of energy bands in solids, Characteristics of p n junctions BJT: ac small signal equivalent circuit, TheEbers-Moll model, capacitances in a BJT, operation at high frequencies, second order effects in BJTs, MOSdiode, MOSFET: channel length modulation, breakdown and punch-through, Sub-threshold current, Smallsignal analysis, Scaling, MISFET, small signal equivalent circuit.

Reading:

1. M.S. Tyagi, Introduction to Semiconductor Materials and Devices, Wiley, 2008.

2. Ben G Streetman, Solid State Electronic Devices, 6th Edition, Pearson Prentice-Hall, 2009.

3. Yuan Taur and T H Ning, Fundamentals of Modern VLSI Devices, 2nd Edition, Cambridge UniversityPress, 2009.

EC5202 DIGITAL IC DESIGN (4-0-0) 4

Quality metrics of Digital design, MOS Inverters, CMOS inverter delay time definitions and calculations,Design of Combinational logic Gates in CMOS, Design of Sequential logic circuits, Pipelining, Non bi-stablesequential circuits, Timing issues in digital circuits, Designing arithmetic building blocks, Memory Design.

Reading:

1. Jan M Rabaey, Digital Integrated Circuits, 2nd Edition, Pearson Education, 2003.

2. Sung-Mo Kang, CMOS Digital Integrated Circuits, 3rd Edition, McGraw-Hill, 2003.

EC5203 ANALOG IC DESIGN (4-0-0) 4

Basic building blocks and basic cells-Switches, active resistors, Current sources and sinks, Current mirrors,Voltage and current references Biasing techniques, Gain boosting techniques, Differential amplifier,Operational amplifier-characterization, 2 stage OP amp, Band Gap Reference Design.

Reading:

1. Pr Gray and Rg Meyer, Analysis and Design of Analog Integrated Circuits, 5th Edition, Wiley, 2009.

2. Mohammed Ismail and Terri Fiez, Analog VLSI: Signal and Information Processing, McGraw-Hill, 1994.

3. Geiger, Allen and Stradder, VLSI Design Techniques for Analog and Digital Circuits, Tata McGraw-HillEducation, 2010.

EC5204 ANALOG IC DESIGN LABORATORY (0-0-6) 4

Introduction to spice, Extraction of parameters using systematic experimental setup, Design of variousAnalog building blocks viz., Current sources and sinks, Design of Single stage amplifier, Gain boostingtechniques, Design of Differential amplifier, Design of Operational amplifier, Design of Temperature andProcess independent robust biasing circuits.

12


EC5205 DIGITAL IC DESIGN LABORATORY (0-0-3) 2

Design of CMOS inverter with customized power dissipation and propagation characteristics, implementationof pass transistor logic, design of digital circuits based on pseudo NMOS, Introduction to VHDL, Developmentof VHDL models for various combinational and sequential digital IC building blocks design and simulation of32 bits MIPS processor.

EC5211 MICRO CHIP FABRICATION TECHNIQUES (3-0-0) 3

Stages of Manufacturing, Process and product trends, Crystal growth, Wafer preparation, process yields.Semiconductor material preparation, Basic wafer fabrication operations, Yield measurement, Contaminationsources, Clean room construction, Oxidation and Photolithography, Doping and Depositions, Metallization,Design rules and Scaling, BICMOS ICs, Packaging.

Reading:

1. Peter Van Zant, Microchip Fabrication, 5th Edition, McGraw-Hill, 2004.

2. C.Y. Chang and S.M.Sze, ULSI Technology, McGraw-Hill, 2000.

3. Eugene D.Fabricius, Introduction to VLSI Design, McGraw-Hill, 1990.

EC5212 CLEANROOM TECHNOLOGY AND MAINTENANCE (3-0-0) 3

Introduction, Cleanroom Classification Standards, Design of Turbulently Ventilated and Ancillary Cleanrooms,Design of Unidirectional Cleanrooms and Clean Air Devices, Construction Materials and Surface Finishes,Cleanroom Testing and Monitoring, Measurement of Air Quantities and Pressure Differences, Filter InstallationLeak Testing, Contamination Control, Cleanroom Disciplines.

Reading:

1. William White, Cleanroom Technology: Fundamentals of Design, Testing and Operation, 2nd Edition,Wiley, 2010.

2. Matts Ramstorp, Introduction to Contamination Control and Cleanroom Technology, Wiley, 2008.

EC5213 ULSI TECHNOLOGY (3-0-0) 3

ULSI process technology, Transmission Electron Microscopy (TEM), Epitaxy, Conventional and Rapid ThermalProcesses, Dielectric and Polysilicon Film Deposition, Lithography, Etching, Metallization and Interconnects,Process Integration, Assembly and Packaging, Wafer Fab Manufacturing Technology, Reliability, ULSI devices:DRAM cell, SRAM cell.

Reading:

1. C. Y. Chang, S.M.Sze, ULSI Technology, McGraw-Hill, 2000.

2. Chih-Hang Tung, George T.T.Sheng, Chih-Yuan Lu, ULSI Semiconductor Process Technology Atlas,John Wiley & Sons, 2003.

EC5214 VLSI DSP ARCHITECTURES (3-0-0) 3

Essential features of Instruction set architectures of CISC, RISC and DSP processors and their implicationsfor Implementation as VLSI Chips, Micro programming approaches for implementation of control part of theprocessor, Pipelined implementation of RISC instruction sets, Hazards of various types and pipeline stalling,Scheduling (Static and Dynamic)

Reading:

1. D.A, Patterson And J.L.Hennessy, Computer Organization and Design: Hardware / Software Interface,4th Edition, Elsevier, 2011.

2. A.S. Tannenbaum, Structured Computer Organization, 4th Edition, Prentice-Hall, 1999

3. W.Wolf, Modern VLSI Design: Systems on Silicon, 2nd Edition, Pearson Education, 1998.

EC5215 HARDWARE / SOFTWARE CO-DESIGN (3-0-0) 3

Nature of hardware and software, Data flow modeling and implementation, Analysis of control flow and dataflow, Finite state machine with datapath, Microprogrammed architectures, System on chip, On chip Buses,Hardware / Software interfaces, Control shell design, Trivium Crypto-Coprocessor, CORDIC Coprosessor.

13


Reading:

1. Patrick Schaumont, A Practical Introduction to Hardware/Software Co-design, Springer, 2010.

2. Ralf Niemann, Hardware/Software Co-Design for Data flow Dominated Embedded Systems, Springer,1998.

EC5216 HARDWARE DESCRIPTION LANGUAGES (3-0-0) 3

Introduction to VHDL, Code Structure, Data types, Operators and Attributes, Concurrent Code, SequentialCode, Signal and Variable, System level VHDL, Extended and Advanced Designs, Introduction to VerilogAMS, Analog Modeling, Language References

Reading:

1. Volnei A. Pedroni, Circuit Design and Simulation with VHDL, 2nd Edition, MIT Press, 2010.

2. Kenneth S Kundert, Olaf Zinke, Designers Guide to Verilog AMS, Springer, 2004.

EC5251 TESTING AND TESTABILITY (3-0-0) 3

Defects and their modeling as faults at gate level and transistor level, Various types of faults, Complexity ofthe testing problem, Generating test for a single stuck at fault in combinational logic, D-algorithm, FAN andPODEM algorithms, Test optimization and fault coverage, Sequential Circuit Testing, DFT, Memory testing,Testing with random patterns, BIST.

Reading:

1. M.Abramovici, M.A. Breuer and A.D. Friedman, Digital Systems Testing and Testable Design, IEEEPress, 1995.

2. V. Agrawal and S.C.Seth, Test Generation for VLSI Chips, Computer Society Press, 1989.

EC5252 MIXED SIGNAL DESIGN (4-0-0) 4

Review of basic building blocks, Frequency compensation schemes, CMFB circuits, Switched capacitorcircuits, Design of sample and hold circuits and comparators, Fundamentals of data converters, Nyquistrate A/D converters, Design of PLL's and DLL's and Frequency synthesizers.

Reading:

1. David A Johns, Ken Martin, Analog Integrated Circuit Design, Wiley, 2008.

2. R.Gregorian and G C Temes, Analog MOS Integrated Circuits for Signal Processing, Wiley, 1986.

3. Roubik Gregorian, Introduction to CMOS Opamps and Comparators, Wiley, 1999.

EC5253 RFIC DESIGN (3-0-0) 3

Design bottle necks, Nonlinearity and time variance, ISI, Random process and Noise, Sensitivity and dynamicrange, passive impedance transformation, FDMA, TDMA, CDMA, Wireless standards, Receiver architecture,Transmitter Architectures, Design of LNA, Mixers, Oscillators, Power amplifiers.

Reading:1. Behzad Razavi, RF Microelectronics, 2nd Edition, Prentice Hall, 2011.2. Bosco Leung, VLSI for Wireless Communication, 2nd Edition, Springer, 2011.3. Thomas H. Lee, The Design of CMOS Radio Frequency Integrated Circuits, 2nd Edition, Cambridge,

2004.

EC5254 MIXED SIGNAL DESIGN LABORATORY (0-0-6) 4

Design of Common mode feed-back circuits, Design of switched capacitor circuits, Design of High SpeedComparator, Design of High Gain comparator, Design of Ring oscillator, Design of PLL, Design of ADC andDACs.

EC5255 PHYSICAL DESIGN AUTOMATION LABORATORY (0-0-3) 2

Simulation of various Partitioning, Routing and Floor planning algorithms.

14


EC5261 FPGA DESIGN (3-0-0) 3

Design and Implementation styles, Design Examples using PLDs, Design of Universal block, memory, Floatingpoint multiplier, Barrel shifter, Special purpose Processors - Xilinx Vertex and Spartan-II, Altera FLEX 10kand other architectures, Parameterized library cell design, Implementation and Testing, Design - Case study-Actel.

Reading:

1. John V.Old Field, Richrad C.Dorf, Field Programmable Gate Arrays, Wiley, 2008.

2. Michel John Sebastian Smith, Application Specific Integrated Circuits, Addison Wesley Professional,2008.

3. Stephen D. Brown, Robert J. Francis, Jonathan Rose, Zvonko G. Vranesic, Field Programmable GateArrays, 2nd Edition, Springer, 1992.

EC5262 FULL CUSTOM DESIGN (3-0-0) 3

Significance of full custom IC design, Layout design flows, Advanced techniques for specialized buildingblock layout design, and Interconnect layout design, Layout design techniques to address electricalcharacteristics, Layout considerations due to process constraints, Guard rings, Constructing the pad ring,Minimizing Stress effects, Layout design techniques in an uncertain environment, CAD tools for layout.

Reading:

1. Dan Clein, CMOS IC Layout Concepts Methodologies and Tools, Newnes, 2000.

2. Ray Alan Hastings, The Art of Analog Layout, 2nd Edition, Prentice Hall, 2006.

EC5263 ASIC SYSTEM DESIGN (3-0-0) 3

Introduction to ASIC, ASIC library design, Programmable ASICs, Programmable ASIC logic cells, I/O cellsand interconnects, Programmable ASIC design software, low level design entry, logic synthesis, simulation,Test, ASIC construction.

Reading:

1. Michel John Sebastian Smith, Application Specific Integrated Circuits, Addison Wesley Professional,2008.

2. Himanshu Bhatnagar, Advanced ASIC Chip Synthesis,: Using Synopsys Design Compiler, 2nd Edition,Kluwer Academic, 2001.

EC5264 LOW POWER VLSI DESIGN (3-0-0) 3

Introduction, Sources of Power Dissipation, Designing for Low power, Physics of power dissipation in CMOSFET devices, Power estimation, Synthesis for Low power, Design and test of low-voltage CMOS circuits,Low power static RAM architectures, Low energy computing using energy recovery techniques, Softwaredesign for low power.

Reading:

1. Kaushik Roy, Sharat C Prasad, Low Power CMOS VLSI Circuit Design, Wiley, 2009.

2. Gary. K.Yeap, Farid N.Najm, Low Power VLSI Design and Technology, World Scientific, 1996

EC5265 GaAs TECHNOLOGY (3-0-0) 3

Non Silicon MOSFET technology, Properties and trade-offs of compound semiconductor MOSFETs, Devicephysics and performance potential of III-V FETs, Theory of HfO2 based high-k dielectric gate stacks, Sub-100nm Gate-III-V MOSFET for Digital applications, Technology/circuit co-design for III-V FETs.

Reading:

1. Serge Oktyabrsky, Peide D.Ye, Fundamentals of III-V Semiconductor MOSFETs, Springer, 2010.

2. C.Y.Chang, Francis Kai, GaAs High-speed Devices, Physics Technology and Circuit Applications, JohnWiley, 1994.

15


EC5266 FORMAL VERIFICATION (3-0-0) 3

Verification process, Current verification techniques, Introduction to formal techniques, Formal test planprocess, Techniques for proving properties, Final system simulation, Introduction to IEEE 1850 propertyspecification language and IEEE 1800 Verilog assertions.

Reading:

1. Douglas L Perry Harry D Foster, Applied Formal Verification, McGraw Hill, 2005.

2. William K Lam, Hardware Design Verification: Simulation and Formal Method-based Approaches, PrenticeHall, 2008.

EC5267 CAD FOR VLSI (3-0-0) 3

Concepts, Features, Algorithms and data structures for Layout editors, Design rule checkers, Circuit extractionat transistor level, LVS, Parasitic extraction, Stick-to-layout conversion and compaction, Circuit Simulation,Event driven simulation of discrete systems, Timing analysis, Floor Planning, Automatic placement androuting, High Level CAD Tools.

Reading:

1. S.H.Gerez, Algorithms for VLSI Design Automation, Wiley, 2006.

2. M.Sarrafzadeh And C.K.Wong, An Introduction to VLSI Physical Design, McGraw Hill, 1996.

EC5268 MEMS AND MICROSYSTEMS (3-0-0) 3

Overview of MEMS and Microsystems, Working principles, Engineering science for Microsystem designand fabrication, Engineering mechanics for Microsystems design, Thermo fluid engineering and Microsystemsdesign, Scaling laws in miniaturization, Materials for MEMS and Microsystems, Fabrication processes,Overview of micro manufacturing, Introduction to Nano scale engineering.

Reading:

1. Tai-Ran Hsu, MEMS and Microsystems, 2nd Edition, Wiley, 2008.

2. Mohamad Gad El Hak, MEMS Design and Fabrication, 2nd Edition, CRC Press, 2006.

EC5269 PHYSICAL DESIGN AUTOMATION (3-0-0) 3

VLSI design Cycle, Physical Design Cycle, Design Rules, Layout of Basic Devices, and Additional FabricationFactors, Complexity Issues and NP-hard Problems, Basic Algorithms (Graph and Computational Geometry),Basic Data Structures, Partitioning algorithms, placement, Floor planning and pin assignment, Routingalgorithms.

Reading:

1. Naveed Sherwani, Algorithms for VLSI Physical Design Automation, 3rd Edition, Kluwer Academic,1999.

2. Charles J Alpert, Dinesh P Mehta, Sachin S Sapatnekar, Handbook of Algorithms for Physical DesignAutomation, CRC Press, 2008.

16


M.Tech. (Advanced Communication Systems)

I Year I Semester

I Year II - Semester


No. No.

1 EC5301 Detection and EstimationTechniques 4 0 0 4

2 EC5302 Digital Modulation Techniques 3 0 0 3

3 EC5303 Coding Techniques 4 0 0 4




7 EC5304 Digital CommunicationLaboratory 0 0 4 3

8 EC5305 Networking Laboratory 0 0 3 2

TOTAL 20 0 7 26


No. No.

1 EC5351 Communication System Modeling 3 0 0 3

2 EC5352 Multimedia Communications 3 0 0 3

3 EC5353 Mobile Networks 3 0 0 3

4 EC5354 Secured Communication 3 0 2 4



7 EC5355 Multimedia CommunicationLaboratory 0 0 3 2

8 EC5356 Modeling and SimulationLaboratory 0 0 4 3

9 EC5391 Seminar 0 0 3 2

TOTAL 18 0 12 26

17


II Year I Semester


No. No.



TOTAL 0 0 0 12

II Year II Semester


No. No.


TOTAL 0 0 0 18

Total Number of Credits 83

Credit Structure

Category ISem

IISem

IIISem

IVSem

Total

Core 11 13 00 00 24

Electives 09 06 00 00 15

Lab Courses 05 05 00 00 10

Seminar 00 02 00 00 02


Project 00 00 08 18 26

Total 25 26 12 18 81

LIST OF ELECTIVES


Elective - I EC5311 Advanced Computer AchitectureEC5312 Software Defined RadioEC5313 Adaptive Signal Processing

Elective - II EC5314 Advanced Computer NetworksEC5315 Telecom Network ManagementEC5316 VLSI System Design

Elective - III EC5317 Advanced Image ProcessingEC5318 Satellite CommunicationEC5319 Quality and Reliability Engineering

Elective - IV EC5361 Fuzzy Systems and Neutral NetworksEC5362 Digital Signal Processing ArchitecturesEC5363 Embedded Systems and RTOS

Elective - V EC5364 Wireless Sensor NetworksEC5365 Optical NetworksEC5366 Mobile Handset Design

18


M.Tech. (Advanced Communication Systems)

EC5301 DETECTION AND ESTIMATION TECHNIQUES (4-0-0) 4

Introduction: Review of Gaussian variables and processes, Statistical Decision Theory: Bayesian, minimax,and Neyman-Pearson decision rules. Detection of Deterministic signals, Detection of random signals,Nonparametric Detection, Estimation of signal parameters, Signal Estimation in Discrete-Time.

Reading:

1. Vantrees, Detection and Estimation Theory, Wiley, 2001.

2. S.M Kay, Estimation Theory, Prentice Hall, 1993.

3. S.M.Kay, Detection Theory, Prentice Hall, 1998.

EC5302 DIGITAL MODULATION TECHNIQUES (3-0-0) 3

Bandpass channels, Bandpass digital modulation techniques, Coherent and Incoherent detection schemes,Noise performance, Partial Response modulation, DPM, GMSK, Wireless QAM, Modulation Techniques forWireless and cellular systems. Spread spectrum communications.

Reading:

1. JG Proakis, Digital Communications, MGH, 4th Edition, 2001

2. R. Steele, Mobile Radio Communication, John Wiley, 2nd Edition, 1999.

3. N.Benvenuto, G. Cherubini, Algorithms for Communication Systems and Applications, John Willey, 2005

EC5303 CODING TECHNIQUES (4-0-0) 4

Coding Algebra, Block codes, Cyclic codes, Convolutional codes, Turbo codes, Low density parity codes.Non-binary parity codes, Trellis Code Modulation, Modulation codes for storage systems, Coding for recordingchannels, Constrained codes, Iterative coding, Turbo coding for multi track recording channels.

Reading:

1. N. Benvenuto, G. Cherubini, Algorithms for Communication Systems and Applications, John Wiley, 2005.

2. B. Vasic, Emkurts, Coding and Signal Processing for Magnetic Recording Systems, CRC Press, 2005.

3. K Moon Todd, Error Control Coding, John Wiley, 2nd Edition, 2005.

EC5304 DIGITAL COMMUNICATION LABORATORY (0-0-4) 3

Data Conditioning and Reconditioning, Baseband digital data transmission, BPSK/DPSK/DEPSK generationand Detection, QPSK/DQPSK generation and Detection, QAM/DQAM generation and Detection,Convolutional code generation and detection, Simulation of digital communication systems.

EC5305 NETWORKING LABORATORY (0-0-3) 2

LAN trainer, Study of topologies, Data Link layer protocols, Routing protocols, Simulation of networks,Network traffic analysis using protocol analyzer, File transfer using sockets, Windows network administration,Linux network administration, Simulation of wired and wireless network scenarios.

EC5311 ADVANCED COMPUTER ARCHITECTURES (3-0-0) 3

Parallel computer models, Principles of scalable performance, Hardware technologies, Processors andmemory hierarchy, Pipelining and superscalar techniques, Linear Pipeline processors, Non-linear pipelineprocessors, Parallel and Scalable Architectures, Multiprocessors and Multicomputers, Multiprocessor systeminterconnects.

Reading:

1. Hwang Kai, Advanced Computer Architecture, 5th Edition, McGraw Hill, 2001.

2. Patterson, David and Hennessy John, Computer Architecture, 3rd Edition, Morgan Kaufmann, 2001.

19


EC5312 SOFTWARE DEFINED RADIO (3-0-0) 3

Software radio concepts, Design principles, Receiver front end topologies, Noise and Distortion in RF chain,Common ADC and DAC architectures, Object oriented software radios, Direct digital synthesizers, CORDICalgorithm, Pulse shaping and interpolation filters, DDS with tunable DSM, Transmitter and receiverarchitectures, Case studies in software radio design.

Reading:1. Paul Burns, Software Defined Radio for 3G, Artech House, 2002.2. Tony J Rouphael, RF and DSP for SDR, Elsevier Newnes Press, 2008.3. Jouko Vanakka, Digital Synthesizers and Transmitter for Software Radio, Springer, 2005.4. P Kenington, RF and Baseband Techniques for Software Defined Radio, Artech House, 2005.

EC5313 ADAPTIVE SIGNAL PROCESSING (3-0-0) 3

Adaptive filter structures, Discrete time stochastic processes, Revisiting probability and random variables.Wiener filter, Search methods and the LMS algorithm, Convergence and Stability analysis, Variants of theLMS algorithm, Vector space framework for optimal filtering, Lattice filter and estimator, RLS lattice filter.

Reading:

1. Simon Haykin, Adaptive Filter Theory, Prentice Hall, Englewood Cliffs, NJ, 1991.

2. B.Farhang-Boroujeny, Adaptive Filters Theory and Applications, John Wiley & v Sons, 1999.

EC5314 ADVANCED COMPUTER NETWORKS (3-0-0) 3

Review of data communication standards, topologies, OSI, TCP/IP models, MAC layer analysis, Introductionto Delay models, Routing in data networks, Fast Ethernet, PPP, WLANs, Bluetooth, WiMax, Virtual LANs,RSVP, ATM architectures, VPN architectures, IPv6, Socket interface, DNS, FTP, SMTP, WWW, SNMP, VoIP,Network security, Digital Signatures, IPSec, Firewalls, IP over ATM.

Reading:

1. A Tanenbaum, Computer Networks, Pearson, 4th Edition, 2003.

2. Halsall. H, Data Communications Computer Networks and Open Systems, 4th Edition, Addison Wesley,2000.

3. Behrouz A. Forouzan, Data Communications and Networking, 3rd Edition, TMH, New Delhi, 2003.

EC5315 TELECOM NETWORK MANAGEMENT (3-0-0) 3

LAN administration, managing wireless networks, virtual networks, managing TDM systems, Managing linkperformance, managing high speed packet networks, network management systems, SNMP tools, Telecommanagement networks, open source management tools, managing network security, mobility managementin wireless networks.

Reading:

1. N J Muller, LANs to WANs: The Complete Management Guide, Artech House, 2003.

2. J W Mark and W. Zhuang, Wireless Communications and Networking, PHI, 2005.

3. Terplan, Telecom Network Management, PHI,1998.

EC5316 VLSI SYSTEM DESIGN (3-0-0) 3

MOS Transistor Theory, CMOS Processing Technology, Circuit Characterization and Performance Estimation,CMOS Circuit And Logic Design, CMOS Design Methods, CMOS Testing, Manufacturing Test Principles,CMOS Subsystem Design, Data path Operations, Memory Elements, Control.

Reading:

1. Pucknell and Eshraghian, Basic VLSI Design, PHI, 3rd Edition,1995.

2. Neil H.E. Weste and Kamran Eshraghian, Principles of CMOS VLSI Design, Wesley, 2000.

3. Wayne Wolf, Modern VLSI Design, Pearson Education Asia, 2002.

20


EC5317 ADVANCED IMAGE PROCESSING (3-0-0) 3

Digital image representation, Fundamental steps in image processing, Digital image fundamentals, Samplingand Quantization, Image Enhancement, Morphological Image Processing, Image Compression, ImageSegmentation, Representation and Description, Boundary descriptions, Regional descriptors, Recognitionand Interpretation.

Reading:

1. Rafael C.Gonzalez and Richard E.Woods, Digital Image Processing, 3rd Edition, Pearson, 2009.

2. AK Jain, Digital Image Processing, PHI, 2002.

3. Pratt, Digital Image Processing, John Wiley, 2003.

EC5318 SATELLITE COMMUNICATIONS (3-0-0) 3

Satellite orbits, Orbital mechanisms, Communication link design, Modulation techniques, Satellite sub systems,Earth station technology, Mobile satellite systems architecture, Satellite packet Communications transmissionby FDMA,TDMA, VSAT Networks, Network error control, Mobile Satellite Networks, Satellite navigation andGPS, Mobile base station antennas.

Reading:1. Tri T. Ha, Digital Satellite Communications, 2nd Edition, McGraw Hill, 2009.2. WL Pritchard, Satellite Communication Systems Engineering, 2nd Edition, Pearson, 2003.3. T. Pratt, Satellite Communications, 4th Edition, John Wiley, 2003.

EC5319 QUALITY AND RELIABILITY ENGINEERING (3-0-0) 3

Definition and Importance of Quality and Reliability, Concepts of reliability, Life characteristic pattern, FailureAnalysis Technique, System Reliability and Modeling, Types of Systems, Types of Standby redundancy,Reliability of different systems, Simulation and Reliability Prediction, Generation of Random Numbers,Maintainability and Availability, Quality Reliability and Safety.

Reading:1. A.K.Govil, Reliability Engineering, TMH, 1983.2. B.S.Dhillion, Reliability Engineering in Systems Design and Operation, Van Nostrand Reinhold Co, 1983.3. A.E.Green and A.J.Bourne, Reliability Technology, 2nd Edition, Wiley-Interscience, 1972.

EC5351 COMMUNICATION SYSTEM MODELING (3-0-0) 3

Space time propagation model, ST channel and signal models, Low pass simulation models for Bandpasssignals and systems, Modeling and Simulation of nonlinearities and time varying systems, spatial diversity,ST coding, ST receivers, spread spectrum model, MIMO and SISO modulation, Time varying fading channel.

Reading:

1. A. Paulraj, Introduction to Space Time Wireless Communications, Cambridge University Press, 2003.

2. GB Giannakis, Signal Processing Advances in Wireless and Mobile Communication, PHPTR, 2001.

3. M. Ibankahla, SP for Mobile Communication Hand Book, CRC Press, 2005.

EC5352 MULTIMEDIA COMMUNICATIONS (3-0-0) 3

Multimedia communications, Audio Visual integration, Multimedia terminals, A-V Coding, Multimediaprocessing in communication ANNs for multimedia processing, distributed multimedia systems, Networking,Multimedia OS, Multimedia comm., MPEG 1 to 7, Real time multimedia across Internet, Packet audio/videomultimedia transport across IP/ATM Network.

Reading:

1. K.R. Rao, Multimedia Communication Systems: Techniques and Standards, Pearson, 2002.

2. D. Bull, Insight into Mobile Multimedia Communication, Academic Press, 1999.

3. PK Andleigh, K. Thakkar, Multimedia Systems Design, PHI, 2002.

21


EC5353 MOBILE NETWORKS (3-0-0) 3

Cellular systems, GSM and CDMA cellular networks, 3G cellular Systems, FPLMTS, Packet data radio,TETRA, DECT reference model, Wireless ATM architecture, Routing and services, Wireless LAN architecture,physical and MAC layers, Mobility management in Wireless Networks, Mobile IP, WAP, Mobile Ad-hocNetworking with 4G.

Reading:

1. B.H Walke, Mobile Radio Networks, John Wiley, 1999.

2. JW Mark, W Zhuang, Wireless Communication and Networking, PHI, 2005.

3. R. Nicopolitids, Wireless Networks, John Wiley, 2003.

EC5354 SECURED COMMUNICATIONS (3-0-2) 4

Security Attacks, CIA Model, Symmetric Ciphers, Number Theory, AES, Block Cipher operation, PRBSgeneration and stream ciphers, Asymmetric Ciphers, PKC and RSA, ECC, Data Integrity algorithms, Hashfunctions, MACs, Digital Signatures, Key management and distribution, User Authentication, Digital Envelope,Transport-Level Security, WLAN security, E-mail security, IP Security, IDS, Malicious Software, Firewalls,WSN security.

Reading:

1. William Stallings, Cryptography and Network Security, Pearson, 2011.

2. Bruice Schneier, Applied Cryptography, 2nd Edition, Wiley India Pvt. Ltd. 2009.

EC5355 MULTIMEDIA COMMUNICATION LABORATORY (0-0-3) 2

Movie maker, Multimedia authoring tool, Image steganography, Watermarking, DVI coding, Entropy encoding,Hybrid coding techniques, YIQ and YUV video encoding standards, Spatial and temporal characteristic ofHDTV, NTC, PAL, ECAM, CD-I (CD-interactive) audio and image encoding standards.

EC5356 MODELING AND SIMULATION LABORATORY (0-0-4) 3

Sampling (up and down), Simulation of Digital Modulation Scheme (QPSK, 16 QAM), Random numbergenerator, Monte Carlo Simulation, Postprocessing, Modelling of Non linearity.

EC5361 FUZZY SYSTEMS AND NEURAL NETWORKS (3-0-0) 3

Neural Information Processing, Multi layer perceptrons, Kohonen Networks, Supervised and Unsupervisedlearning, Statistical learning, ART Networks, Genetic Algorithms, Rule-based Neural networks, Incrementallearning, Probabilistic NNs, Incremental RBCN, NN applications, Fuzzy Sets and Systems.

Reading:

1. Limin FU, Neural Networks in Computer Intelligence, McGraw Hill Co., 1994.

2. B.Kosko, Neural Networks and Fuzzy Systems, Prentice Hall,1992.

3. S.Haykin, Neural Networks: A Comprehensive Foundation, Maxell MacMillan International, 1991.

EC5362 DIGITAL SIGNAL PROCESSING ARCHITECTURES (3-0-0) 3

Programmable DSP architectures, On chip peripherals, Architecture of TMS 320 C5X, Bus structure,Programmable controller, On chip memory, Assembly language, Instruction pipelining, Applications programsin C5X, Least Square methods for system modeling, Signal analysis with higher order spectra, Adaptivetransversal filters.

Reading:

1. B. Venkatramani, M. Bhaskar, DSP Architectures and Algorithms, TMH 2002.

2. J.G. Proakis, Algorithms for Statistical Signal Processing, Pearson 2002.

3. N. Benvenuto, G. Cherubini, Algorithms for Communication Systems and Applications, John Wiley 2005.

22


EC5363 EMBEDDED SYSTEMS AND RTOS (3-0-0) 3

Introduction to Embedded Computing, Design example, Embedded system design process, ARM Processor,CPU performance, CPU power consumption, Computing Platform and Design Analysis, Process andOperating Systems, Multiple tasks and multi processes, Context Switching, Hardware Accelerates, Casestudy.

Reading:

1. Wayne Wolf, Computers as Components, Morgan Kaufmann Publisher, 2006.

2. David E-Simon, An Embedded Software Primer, Pearson Education, 2007.

3. K.V.K.K. Prasad, Embedded Real-Time Systems, Dreamtech Press, 2005.

EC5364 WIRELESS SENSOR NETWORKS (3-0-0) 3

Sensor networks, Advantages and applications, Localization and tracking, Networking sensors, Clusteringand Time synchronizations, Sensor tracking and control, Sensor Network, Node hardware, Node levelsoftware, Operating systems, Practical sensor networks, Industrial sensor networks, Taxonomy of routingtechniques, Transport layer and Security protocols.

Reading:

1. F. Zhao, C Guibas, Wireless Sensor Network, Morgan Kaufmann, 2004.

2. Mohammad Ilyas, Imad Mahgoub, Hand Book of Sensor Networks, CRC Press, 2005.

EC5365 OPTICAL NETWORKS (3-0-0) 3

Combining WDM and TDM, Local and backbone connections, Layers protocol model and internet Layers,SONET and SDH, Architecture of Optical transport Network, Dense WDM, BLSR and PON, Multi protocolLambda switching, IP frame work over optical networks, Link Management protocol, Optical routers, Opticalinternet.

Reading:

1. Uyless Black, Optical Networks-3G Transport Systems,Pearson, 2002.

2. R Ramaswamy, Kn Sivarajan, Optical Networks, 3rd Edition, Elsevier, 2010.

3. Jun Zheng, Optical WDM Networks, IEEE Press, 2004.

EC5366 MOBILE HANDSET DESIGN (3-0-0) 3

Problem analysis in Mobile Communications, High Frequency amplifier design, Voltage references andbiasing, Noise, LNA design, Mixers, Feedback systems, RF Power amplifiers, PLL's, Oscillators andsynthesizers, Phase noise, Transmitter architectures, Design solution analysis for mobile handsets, GSMRadio modem design, GSM Mobile Phone Software Design, Anatomy of mobile handset, UMTS RadioModem Design.

Reading:

1. Thomas H Lee: The Design of CMOS Radio Frequency Integrated Circuits, 2nd Edition, CambridgeUniversity Press, 2009.

2. Sajal K Das, Mobile Handset Design, John Wiley & Sons (Asia) Pvt. Ltd. 2010.

ECE_M.Tech nit warangal

Documents

Transcript of ECE_M.Tech nit warangal