CMQ2513WL OM 110117 - Rock The Boat AudioTHIELE SMALL PARAMTERS PARAMÉTRES THIELE-SMALL PARÁMETROS...
Transcript of CMQ2513WL OM 110117 - Rock The Boat AudioTHIELE SMALL PARAMTERS PARAMÉTRES THIELE-SMALL PARÁMETROS...
GENERAL SPECIFICATIONSSPÉCIFICATIONS GÉNÉRALESESPECIFICACIONES GENERALES
THIELE SMALL PARAMTERSPARAMÉTRES THIELE-SMALLPARÁMETROS THIELE-SMALL
Speaker SizeTaille de haut-parleurTamaño de los altavoces
DCR
Sd
Fs
Qes
Qms
Qts
Vas
Mms
Mmd
BL
10” (250mm)
Subwoofer
800 Watts
250 Watts
2-Ohms DVC
30~800 Hz
87dB
4.2 Ohm (2.1 Ohm + 2.1 Ohm)
0.033329 m²
48.636 Hz
0.649
6.520
0.591
21.754 L
77.647 g
74.149 g
12.090
Xmax 10.65 mm
Speaker TypeGenre de haut-parleurTipo de altavoz
Peak PowerGestion de la puissance maximaleManipulación de potencia máxima
RMS PowerGestion de la puissance continueManipulación de potencia continua
ImpedanceImpédanceImpedancia
Frequency ResponseRésponse en fréquenceRespuesta a la frecuencia
SensitivitySensibilitéSensibilidad
Owners's manual & Installation manualManuel du propriétaire et manuel d'installationManual de instrucciones y manual de instalación
CM2513WL
For more information please visit Clarion website www.clarion.com or call 1-800-GO-CLARIONClarion Corporation of America Designed in California. Manufactured in China.
Color Output
RedRed
Green
Blue
Red + Green
Red + Blue
Green + Blue
Red + Green + Blue
Green
Blue
Yellow
Magenta
Light Blue
White
RGB Wire(s)
Note: When paired with an LED controller, speaker LEDs can achieve up to 16 million color variations
To activate speaker LED, Black wire must be connected to +12V positive and RGB wires must be grounded. To
Ensure arrow is facing downward forproper speaker orientation
10.83” (275mm)
8.66” (220mm)
5.04
” (1
28m
m)
6.99
” (1
77.5
mm
)
Blue (GND)
Red (GND)
Green (GND)
Black + 12V Positive
Black - Negative
Red + Positive
Jumper Wire
10” (250MM) MARINE 2-OHMS DVC SUBWOOFERCAISSON DE BASSES DVC MARINE 2 OHMS, 10 PO (250MM)
SUBWOOFER DVC MARINO DE 2-OHMS DE 10” (250MM)
43
21
21
21
CutoutHole
Dual Voice Coil Configurations
Option 1 (Default) Option 2
4-Ohm Configuration Cut White wire to create Dual 2-Ohm Configuration
4-Ohm
White
Red Black White Red
Black White
2-Ohm
2-Ohm
Red Black
White
4-Ohm