THIELE FORGING TECHNOLOGY

THIELEFORGING TECHNOLOGY

2 | THIELE Forging Technology

THIELE GMBH & CO. KG

Place and date: For the issuing office:Barendrecht, 03 October 2020 DNV GL - Business Assurance

Zwolseweg 1, 2994 LB Barendrecht, Netherlands

Erie KoekManagement Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB, Barendrecht, Netherlands. TEL:+31(0)102922689. www.dnvgl.com/assurance

MANAGEMENT SYSTEM CERTIFICATECertificate No:10000406166-MSC-RvA-DEU

Initial certification date:08 February 1994

Valid:01 May 2018 - 30 April 2021

This is to certify that the management system of

Thiele GmbH & Co. KGWerkstrasse 3, 58640 Iserlohn / Kalthof, Germany

has been found to conform to the Quality Management System standard:ISO 9001:2015

This certificate is valid for the following scope:Design, Development, Production, Sales and Service of link chains and conveyor chains as well as components and accessories for - Mining - Lifting Technology - Bulk Material Handling

Place and date: For the issuing office: Essen, 10. July 2020 DNV GL - Business Assurance

Schnieringshof 14, 45329 Essen, Germany

Thomas Beck Management Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance Zertifizierung & Umweltgutachter GmbH, Schnieringshof 14, 45329 Essen, Germany. TEL:+49 201 7296 515. www.dnvgl.de/assurance

Certificate No: 194938-2016-AHSO-GER-DAkkS

Initial certification date: 10. July 2020

Valid: 10. July 2020 - 14. August 2022


Thiele GmbH & Co. KG Werkstrasse 3, 58640 Iserlohn / Kalthof, Germany

has been found to conform to the Occupational Health and Safety Management System standard: ISO 45001:2018

This certificate is valid for the following scope: Design, Development, Production, Sales and Service of link chains and conveyor chains as well as components and accessories for - Mining - Lifting Technology - Bulk Material Handling

Place and date: For the issuing office: Essen, 10. July 2020 DNV GL - Business Assurance

Schnieringshof 14, 45329 Essen, Germany

Thomas Beck Technical Manager

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance Zertifizierung und Umweltgutachter GmbH, Schnieringshof 14, 45329 Essen, Germany. TEL:+49 201 7296-222. www.dnvgl.de/assurance

Certificate No: 91891-2011-AE-GER-DAkkS

Initial certification date: 16. August 2011

Valid: 16. August 2020 - 15. August 2023



has been found to conform to the Environmental Management System standard:

ISO 14001:2015

This certificate is valid for the following scope:

Design, Development, Production, Sales and Service of link chains and conveyor chains as well as components and accessories for - Mining - Lifting Technology- Bulk Material Handling

Place and date: For the issuing office: Essen, 10. July 2020 (replaces the certificate 134186-2013-AE-GER-DAkk; Edition of 29. September 2019)

DNV GL - Business Assurance Schnieringshof 14, 45329 Essen, Germany

Thomas Beck Management Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance Zertifizierung & Umweltgutachter GmbH, Schnieringshof 14, 45329 Essen, Germany. TEL:+49 201 7296-555. www.dnvgl.de/assurance

Certificate No: 134186-2013-AE-GER-DAkkS

Initial certification date: 15. August 2013

Valid: 10. Juli 2020 - 22. August 2022



has been found to conform to the Energy Management System standard: ISO 50001:2018

This certificate is valid for the following scope: Design, Development, Production, Sales and Service of link chains and conveyor chains as well as components and accessories for - Mining - Lifting Technology - Bulk Material Handling

The scope of the system includes all processes and assets under the company's control at the certified site

Our promise to you

1. Our highly skilled workforce and modernmanufacturing facilities guarantee productsof the highest quality.

2. We will work with you to supply customer-specificproducts tailored to meet your requirements

3. We are constantly improving our processes forenhanced resource efficiency and sustainability.

A partner you can rely on for chain systems and forging services

THIELE was established in Iserlohn-Kalthof more than 85 years ago and the company is now one of the world‘s foremost manufacturers of chain systems. The forging of quality compon-ents has become one of our core competence areas. Customers benefit from our established expertise in product design and manufacturing, with everything we supply being produced at our Iserlohn plant in Germany.

As well as supplying the traditional markets for conveying and lifting equipment we also operate in new future-oriented sectors like mobility and renewable energies.

Our company values are born out of loyalty and respect. We believe in treating our customers as partners with a shared interest in developing successful, long-term business relationships based on product quality and punctual delivery.

THIELE is well known for its responsible and forward thinking management approach. The integration of THIELE GmbH & Co KG into the THIELE Foundation has placed the company in a secure position for the future.

| 3THIELE Forging Technology

WHAT YOU CAN EXPECT FROM USHigh level of value-added based around state-of-the-art forging lines

Our product range:

Forging machines (16 - 160 kJ) | forging press (bis 1600 t)

component weight from 100 g to 100 kg | component length up to 1.100 mm

Heat treatment:

A process-based heat treatment stage delivers the final product characte-ristics. Here a state-of-the-art, fully-automated heat treatment plant ensures that the end-products meet the highest mechanical specifications.

Square billets (edge length 50 to 120 mm) or round stock (18.5 to 200 mm in diameter) can be used as feedstock material.

Our forged products are based around a large selection of materials:

• chain steels (DIN 17115) • non-alloy heat-treatable steels (DIN EN ISO 683-1) • alloy heat-treatable steels (DIN EN ISO 683-2)• case-hardened steels (DIN EN ISO 683-3) • non-alloy structural steels (DIN EN ISO 10025-2)

Special steels, e.g. high-alloy, corrosion-resistant, heat-resistant and anti-magnetic steels, are available on request.


YOUR ONE-STOP PROVIDER

Our range of services:

• metal forging • a range of welding processes • laser, plasma and gas cutting• multi-spindle milling machines • CNC machining • assembly and end production • heat treatment • painting and surface finishing


Product development

Our in-house manufacturing base can cover the entire process from raw material through to final product. High-level expertise makes for short lead times, especially when new products are being deve-loped.

FEM simulation

We use precise calculations backed up by the experience of our engineering team to carry out stress analyses before production begins. This makes for a product development process that is both highly efficient and optimised to the maximum.

Material flow simulation

3D simulations optimise the forging process, enable precise volume calculations, increase efficiency and have a positive impact on product quality.

Manufacture of dies, trim dies and calibration tools

Material flow simulation CNC machining

Modern 5-spindle machining centre

Our range of services:

• metal forging • a range of welding processes • laser, plasma and gas cutting• multi-spindle milling machines • CNC machining • assembly and end production • heat treatment • painting and surface finishing

FEM simulation of a ringbolt


WHEN COMPROMISE IS NOT AN OPTIONExamples from our product range: Component weight: 23 kg

Dimensions: 420 x 450 mmForging line: 100 kJ

Component weight: 60 kgDimensions: 1075 x 160 mmForging line: 160 kJ


Component weight: 1,3 kgDimensions: 185 x 60 mmForging line: 31,5 kJ

Component weight: 5,5 kgDimensions: 252 x 160 mmForging line: 40 kJ

Component weight: 1 kgDimensions: 150 x 50 mmForging line: 31,5 kJ


• we are a system supplier • we offer a mobile service providing technical

advice on-site • more than 85 years experience in metal

forging • user-specific product development • 3D simulations with material flow analysis • FEM-optimised forgings • state-of-the-art heat treatment and machining

facilities

What are the advantages?

We know and understand your product

The THIELE product development team will work alongside you to complete one-off production runs and manage joint projects. Our engineers can provide advice on all aspects of the project and will produce customised specifications so that the end-product meets your exact requirements.

If you have any enquiries or would like an informal quotation -

our qualified technical personnel will be pleased to help. Contact them on

+49 23 71 9 47 - 251 [email protected]

Component weight: 3,3 kgDimensions: 160 x 140 mmForging line: 31,5 kJ


THIELE GmbH & Co. KG

Werkstr. 358640 Iserlohn - KalthofGermany

phone: +49 23 71 9 47 - 251fax: +49 23 71 9 47 - 295web: www.thiele.demail: [email protected]

Artik

elnu

mm

er/ N

M/ 0

1.20

21

Follow us

THIELE FORGING TECHNOLOGY

Documents

Transcript of THIELE FORGING TECHNOLOGY