Brought to you by AMI MARINE (UK) LTD. Support before, during and after Fully Type Approved...
-
Upload
isabella-flax -
Category
Documents
-
view
213 -
download
0
Transcript of Brought to you by AMI MARINE (UK) LTD. Support before, during and after Fully Type Approved...
KW810 - BNWASBrought to you byAMI MARINE (UK) LTD
Support before,during and after
Why AMI?
• Fully Type Approved
• Worldwide Sales, Service and
Support
• System configuration and
drawings
• When installed and commissioned
by an AMI approved agent:
3 Year Warranty
Durable Touchscreen Panels
Modern Functional Design
• Uses same technology as
iPhone
• All printing and coatings are
inside the panel, so it will not
wear out
• No moving parts or membrane
switches for long life and
reliability
Future-proof from the start
Designed to be Better
• No hidden costs
• Interface board included
(4 x NMEA, 4 x dry contact)
• Automatic timer reset from ECDIS,
RADAR etc.
• Auto mode allows Autopilot or GPS
to initiate / disable BNWAS
• 4th Stage alarm output for SSAS / GMDSS to alert
ship owner and /or other vessels if the bridge remains
unattended.
All AMI BNWAS alarmsSound Morse B
Smart Alarms
• Distinct sound signature
• Differentiate BNWAS from other
alarms e.g. fire alarm etc.
• Ship’s general alarm can be used
(check with surveyor)
• All panels have audio and visual
alarms built in.
� B for BNWAS
Product Range
KW810 BNWAS
Main Alert Panel
KW810-MAP
• Primary BNWAS Panel
• Ships with Main Electronic Unit
• Audio Visual Alert
• Reset & Test button
• Emergency Call Button
• Light Sensing cell for night vision
• Connects with 2 x 6 core interconnect
cable
Remote Alert Panel
KW810-R
• Audio Visual Alert Panel
• Reset & Test Button
• Durable polycarbonate touch screen
• IP65 rated for internal / external use
(e.g. Bridge Wings)
Dual TechnologyMotion Sensor
KW810-P
• Infrared and Microwave
• Needs live body mass of at least 38kg to
activate
• Prevents false resets
• Range: 12m Beam width: 90°
• Type Approved for use with AMI BNWAS
Duty OfficerSelection Switch
KW810-DOS
• 4-way Officer Selection switch
• Comes with junction box and Touch
screen switch panel
• Can be installed so that Captain is
“Always On”
• Type Approval in progress
• Available Oct 2011
Watch Alarm Panel
KW810-W
• For 2nd / 3rd stage – no reset button
• Audio Visual Alarm Panel
• BNWAS Status always displayed
• Can be wired in parallel or daisy
chained to reduce cable runs
Sound Alarm Beacon
KW810-SAB
• 110dB Sounder / Beacon
• Adjustable Volume
• Blue Flashing strobe
• Internal / External use
• Can be wired as Beacon only (without
sound)
• Ships with junction box
• Available October 2011
Typical System Layout
Block Diagram
Parts List
KW810 BNWAS
KW810-MAP MONITOR ALERT PANELKW810-W WATCH ALERT PANELKW810-R REMOTE ACKNOWLEDGE PANELKW810-P BNWAS MOTION SENSORKW810-DOS DUTY OFFICER SELECTOR PANELKW810-SAB SOUNDER ALERT BEACONCAB-2CP 2 core AC Power CABLE / metreCAB-2CD 2 core Data CABLE /metreCAB-6IC 6 core low smoke, halogen free interconnect CABLE / metreKW810-DC BNWAS DEMO CASEKW810-DC1 BNWAS DEMO CASE with DUTY OFFICER PANELKW8001 SMALL VESSEL STD SYSTEMKW8002 MEDIUM VESSEL STD SYSTEMKW8003 LARGE VESSEL STD SYSTEM
AMI Marine (UK) LtdUnit 2 Tower Industrial Estate,
Tower Lane, Eastleigh, Southampton SO50 6NZUK
Tel: +44 (0)2380 480 450
Fax: +44 (0)2380 480 451
www.amimarine.net