Arch 112
Transcript of Arch 112
-
7/28/2019 Arch 112
1/2
University of Asia Pacific
Spring 2013
Level 1 term1
Arch 112: Architectural Graphics I
Course duration-14 weeksDate: April 22, 2013
Course Coordinator: Naushad E Haque & Md. Nawrose Fatemi
COURSE OUTLINE:
Understanding the purpose of graphics as artistic & technical tool. Lettering & Graphic presentation symbols. Multi view drawing such as plan, section & elevation. Para line drawings such as isometric, axonometric etc. Understanding the comparative merits of different ways of presentation.
COURSE CONTENT:
Week 1 Lecture 1 General introduction, providing list of instruments
Lecture 2 Sheet Layout, Lettering
Week 2 Lecture 3 Introduction to Architectural Drawing> Plan+ Elevation
Lecture 4 Plan+ Elevation
Week 3 Lecture 5 Plan+ Elevation
Lecture 6 Plan+ Elevation
Week 4 Lecture 7 Introduction to Architectural Drawing> Section
Lecture 8 Section
Week 5 Lecture 9 Section
Lecture 10 Plan+ Elevation+ Section
Week 6 Lecture 11 Plan+ Elevation+ Section
Lecture 12 Plan+ Elevation+ Section
Week 7 Mid Term Examination Week
Week 8 Lecture 13 Introduction to Axonometric Drawing, 3D View perception with hand
sketches
Lecture 14 3D View perception with hand sketches
Week 9 Lecture 15 3D View perception with hand sketchesLecture 16 Axonometric Drawing
Week 10 Lecture 17 Axonometric Drawing
Lecture 18 Axonometric Drawing
Week 11 Lecture 19 Plan+ Elevation+ Section+ Axonometric Drawing
Lecture 20 Plan+ Elevation+ Section+ Axonometric Drawing
Week 12 Lecture 21 Plan+ Elevation+ Section+ Axonometric Drawing
Lecture 22 Plan+ Elevation+ Section+ Axonometric Drawing
-
7/28/2019 Arch 112
2/2
Week 13 Lecture 23 Examination 1
Lecture 24 Examination 2
Week 14 Lecture 25 Examination 3
Lecture 26 Examination 4
Week 15 Lecture 27 Examination 5
Lecture 28 Examination 6
Week 16 Preparatory leave before final examination
Week 17
Final Examination WeeksWeek 18
LIST OF INSTRUMENTS REQUIRED FOR THE CLASS
Drafting Board (2 X 3) with Parallel Bar Thread for Parallel Bar Masking Tape NT Cutter+ Extra Blade for cutter 12 Triangular Scale Set Square (45o & 30o/60o) Tracing Paper (20 X30) Lead holder (0.3, 0.5, 0.7 HB+2B) + extra lead Eraser (soft) Erasing Shield (optional Piece of cloth (to clean the drafting table)) Piece of cloth (to keep the sheet clean)
Pencils (2B, 4B, 6B) Sketch Book
GENERAL INSTRUCTIONS:
Please be present at the studio on time; you will not be allowed to enter the studio after 15minutes from the starting time of the class.
Please keep your tables clean all the time. You are expected to submit projects on due time; no late submissions will be accepted.
REFERENCE BOOKS
Design graphics by C. Leslie Martin Architectural Graphics by Francis DK Ching Rendering with pen & Ink by Robert W Gill