95039632 SACS Software

Engineering Dynamics, Inc. has developed the SACS® system of software for both offshore

structures and general civil engineering applications. SACS® consists of several compatible

structural analysis programs which are interfaced to each other to eliminate the requirement, but

not the ability, for user interaction with the output of one program before input to another. All

programs include a full complement of standard engineering defaults in both English and Metric

units to simplify input. The relationships among the programs comprising the system are

schematically illustrated in the flow diagram below. All structural data: geometry, member

dimensions, material properties and environmental conditions are generated by the input gener-

ating programs and reside in the common input file. The solution programs operate on this data

and produce the common solution file which contains joint displacements and element internal

forces. The post processing programs, using this information, evaluate the performance of the

structure with respect to any of several structural codes. Any structure not satisfying the code

may be automatically redesigned. Additionally, plots of the structural geometry, deformed

shapes and code checking information are available. Finally, complete dimensioned structural

drawings, bills of materials and lofting data are automatically produced.

SACS Described

The SACS® system is available for the PC environment using Windows NT/2000/XP. The

system is modular and may be purchased or leased monthly as a complete package, as bundles

or as individual modules. The following prices apply to a single user system which allows

execution only on the machine to which the security key is attached.

STATIC I Pro: Professional Static Offshore PackageThe Professional Static Offshore package contains capabilities required for typical offshore

jackets, wharfs, and dolphin structures. The package includes the interactive graphics modeled

with advanced 3D capabilities, SACS IV solver and interactive graphics postprocessor. The

package also includes SEASTATE, JOINT CAN, PILE, COMBINE, GAP, TOW and LDF large

deflection. This package

includes automatic model generation, beam and finite element capability, steel code check and

redesign, environmental load generation, tubular connection check, single pile/soil interaction,

inertia and moving load generation, tension/compression nonlinear elements with initial gap,

load case combination, linear large deflection analysis and full output report and plotting

capabilities.

STATIC II Pro: Professional Static Analysis PackageThe Professional Static package contains capabilities required for static structural analysis. The

package includes the interactive graphics modeled with advanced 3D capabilities, SACS IV

solver and interactive graphics post-processor. The package also includes COMBINE, GAP,

TOW and LDF large deflection. This package includes automatic model generation, beam and

finite element capability, steel code check and redesign, inertial and moving load generation,

tension/compression nonlinear elements with initial

gap, load case combination, linear large deflection analysis and full output report and plotting

capabilities.

STATIC III Pro: Professional Static Topsides PackageThe Professional Static topsides package contains capabilities required for typical topside and

deck analysis. The package includes the interactive graphics modeled with advanced 3D

capabilities, SACS IV solver and interactive graphics post-processor. The package also includes

TOPSIDES LOADING, COMBINE, GAP, TOW and LDF large deflection. This package

includes automatic model generation, beam and finite element capability, steel code check and

redesign, wind and gravity load generation, inertia and moving load generation,

tension/compression nonlinear elements with initial gap, load case combination, linear large

deflection analysis and full output report and plotting capabilities.

NON-LINEAR I: Basic Non-Linear Add-on The Basic Non-linear Add-on package permits non-linear soil/pile/structure interaction analysis

of fixed offshore structures with multiple fixed supports using the PSI program modules.

Requires use of the STATIC I Pro, STATIC II Pro or STATIC III Pro package.

Analysis Packages

NON-LINEAR II: Plastic Non-Linear Add-onThe Plastic Non-Linear Add-on package includes non-linear foundation and non-linear and

plastic analysis capabilities. Plastic analysis includes pushover, ship impact and blast non-linear

analysis. The PSI non-linear soil/pile/structure interaction program module, the COLLAPSE

non-linear plastic analysis program module and the COLLAPSE VIEW interactive collapse

results processor are included in this package. Requires use of the STATIC I Pro, STATIC II Pro

or STATIC III Pro package.

DYNAMIC I: Basic Dynamic Add-onThe Basic Dynamic Add-on package includes the DYNPAC dynamic characteristics module and

a choice of either the DYNAMIC RESPONSE seismic and vibration analysis module or the

WAVE RESPONSE dynamic wave load generation module. This add-on package permits either

response spectrum and time history seismic analysis, including CQC and SRSS modal

combination techniques, vibration analysis, including evaluation of results vs. vibration

allowable curves, and ice dynamics (DYNAMIC RESPONSE program module) or random, time

history and deterministic wave response analysis (WAVE RESPONSE program module).

Requires use of the STATIC I Pro, STATIC II Pro or STATIC III Pro package.

DYNAMIC II: Advanced Dynamic Add-onThe Advanced Dynamic Add-on package includes the DYNPAC dynamic characteristics module

and the DYNAMIC RESPONSE seismic and vibration analysis module and the WAVE

RESPONSE dynamic wave load generation module. This add-on package permits response

spectrum and time history seismic analysis, including CQC and SRSS modal combination

techniques, vibration analysis, including evaluation of results vs. vibration allowable curves, and

ice dynamics and random, time history and deterministic wave response analysis. Requires use of

the STATIC I Pro, STATIC II Pro or STATIC III Pro package.

DYNAMIC FATIGUE I: Basic Dynamic Fatigue PackageThe Basic Dynamic Fatigue Package contains the modules required to determine the fatigue

damage of a dynamic system. This package contains the modules of the DYNAMIC I Add-on

Package and the FATIGUE Pro module. Requires use of the STATIC I Pro, STATIC II Pro or

STATIC III Pro package.

DYNAMIC FATIGUE II: Advanced Dynamic Fatigue PackageThe Advanced Dynamic Fatigue Package contains the modules required to perform any dynamic

deterministic, time history or spectral fatigue analysis. This package contains the modules of the

DYNAMIC II Add-on Package and the FATIGUE Pro module. Requires use of the STATIC I

Pro, STATIC II Pro or STATIC III Pro package.

MARINE II: Marine Installation Add-onThe Marine Installation Add-on package permits launch and upending analysis. The package

includes the LAUNCH and FLOTATION program modules. Requires use of the STATIC I Pro,

STATIC II Pro or STATIC III Pro package.

MARINE III: Advanced Marine Transportation/Installation Add-onThe Advanced Marine Transportation and Installation add-on permits transportation, stability,

motion, upending and launch analysis. The package contains the MOTION/STABILITY,

FLOTATION and LAUNCH program modules. Requires use of the STATIC I Pro, STATIC II

Pro or STATIC III Pro package.

DIFFRACTION WAVE I: Linear Diffraction Wave Add-onThe Linear Diffraction Wave Add-on allows for single body linear diffraction wave analyses. The

add-on package contains LINEAR DIFFRACTION and the GLOBAL LOAD program modules

and requires use of the STATIC I Pro, STATIC II Pro or STATIC III Pro package.

DIFFRACTION WAVE II: Time Domain Diffraction Wave Add-onThe Time Domain Diffraction Wave Add-on allows for single body time history second order

diffraction wave analyses. The add-on package contains TIME DOMAIN DIFFRACTION and

the GLOBAL LOAD program modules and requires use of the STATIC I Pro, STATIC II Pro or


DIFFRACTION INTERFACE I: Single Body Wamit/Mora Interface Add-onThe Single Body Wamit/Mora Interface add-on allows the SACS system to interface with either

the Wamit or Mora diffraction wave program for single-body floating studies. The add-on

package contains either the SACS/Wamit or SACS/Mora Interface and the GLOBAL LOAD

program modules and requires use of the STATIC I Pro, STATIC II Pro or STATIC III Pro

package in addition to either the Wamit or Mora diffraction wave package.

DIFFRACTION INTERFACE II: Multi Body Wamit Interface Add-onThe Multi-Body Wamit Interface add-on allows the SACS system to interface with the Wamit

diffraction wave program for multi-body floating studies. The add-on package contains the

SACS/Wamit Interface, SUPERELEMENT and GLOBAL LOAD program modules and requires

use of the STATIC I Pro, STATIC II Pro or STATIC III Pro package in addition to the Wamit

diffraction wave package.

MARINE II: Marine Installation Add-onThe Marine Installation Add-on package permits launch and upending analysis. The package

includes the LAUNCH and FLOTATION program modules. Requires use of the STATIC I Pro,

STATIC II Pro or STATIC III Pro package.

MARINE III: Advanced Marine Transportation/Installation Add-onThe Advanced Marine Transportation and Installation add-on permits transportation, stability,

motion, upending and launch analysis. The package contains the MOTION/STABILITY,

FLOTATION and LAUNCH program modules. Requires use of the STATIC I Pro, STATIC II

Pro or STATIC III Pro package.

DIFFRACTION WAVE I: Linear Diffraction Wave Add-onThe Linear Diffraction Wave Add-on allows for single body linear diffraction wave analyses. The

add-on package contains LINEAR DIFFRACTION and the GLOBAL LOAD program modules

and requires use of the STATIC I Pro, STATIC II Pro or STATIC III Pro package.

DIFFRACTION WAVE II: Time Domain Diffraction Wave Add-onThe Time Domain Diffraction Wave Add-on allows for single body time history second order

diffraction wave analyses. The add-on package contains TIME DOMAIN DIFFRACTION and

the GLOBAL LOAD program modules and requires use of the STATIC I Pro, STATIC II Pro or


DIFFRACTION INTERFACE I: Single Body Wamit/Mora Interface Add-onThe Single Body Wamit/Mora Interface add-on allows the SACS system to interface with either

the Wamit or Mora diffraction wave program for single-body floating studies. The add-on

package contains either the SACS/Wamit or SACS/Mora Interface and the GLOBAL LOAD

program modules and requires use of the STATIC I Pro, STATIC II Pro or STATIC III Pro

package in addition to either the Wamit or Mora diffraction wave package.

DIFFRACTION INTERFACE II: Multi Body Wamit Interface Add-onThe Multi-Body Wamit Interface add-on allows the SACS system to interface with the Wamit

diffraction wave program for multi-body floating studies. The add-on package contains the

SACS/Wamit Interface, SUPERELEMENT and GLOBAL LOAD program modules and requires

use of the STATIC I Pro, STATIC II Pro or STATIC III Pro package in addition to the Wamit

diffraction wave package.

Program Details

SACS Executive: Common interface to programsuite

• Controls and connects all elements of the

SACS system.

• Launches all SACS interactive programs.

• Executes all batch program analyses.

• Allows access to all SACS system

configuration settings, including system file

location and security key settings.

• Includes command line help and power

buttons for the most commonly executed tasks.

•Specifies analysis options without changing

data input file.

PrecedePro: Interactive full screen color graphics modeled

• Model generation capabilities include geometry,

material and section properties and loading.

• Automatic input error detection.

• Maintains data backup.

• Beam and/or finite element modeling including

plate and shell elements.

• Automatic offshore jacket and deck generation.

• Automatic Cartesian, cylindrical or spherical

mesh generation.

• Automatic weight or load generation including

gravity, pressure and skid mounted equipment

loads.

• Seastate data generation capabilities.

• Extensive plotting and reporting capabilities.

• Code check parameter generation including

K-factors and compression flange unbraced

lengths.

• Allows SACS model files to be converted into

3D SAT file format compatible with AutoCAD,

CADKey, TurboCAD Professional and other

Acis enabled CAD packages.

• Supports full 3D geometry and section

properties.

• Allows SACS model files to be ported directly

to a PDMS macro file which creates the 3D

model in PDMS.

• Supports PDMS section libraries in addition to creating PDMS

sections for sections defined in the SACS model.

Data Generator: Interactive data generation for all programs

• Full screen editor which labels and highlights

data fields, and provides help for data input.

• Automatic data checking.

Prevue: Interactive plot view utility• Ability to view plot files on screen.

• Supports HP-GL, Postscript, DXF, Windows

Metafile (WMF), and SACS NPF plot file

formats.

• Sends viewed plots to printer/plotter

devices.

• Allows plot size, character size, margins,

etc.

• Form-filling data input available as well

as full screen mode.

Seastate: Environmental loads generator• Full implementation of API 21st edition.

• Supports five wave theories.

• Current included or excluded.

• Generates load due to wind, gravity, buoyancy

and mud flow.

• Marine growth, flooded and non-flooded

members.

• RAO and acceleration loading including non-

structural weights.

•Moving loads generation

• Diameter, Reynolds number and wake

encounter effects dependent drag and iner-

tia coefficients.

• Weight load cases.

• Forces on non-structural bodies.

• Deterministic and random wave modeling

fordynamic response.

• Member hydrodynamic modeling for

staticand dynamic analysis modeling.

SACS IV: Static beam and finite element

analysis

• Beam elements including tubulars, tees, wide

flanges, channels, angles, cones, plate and box

girders and stiffened cylinders and boxes.

• Solid and plate elements (isotropic and

stiffened).

• Discrete Kirchoff Theory (DKT) thin-plates.

• Isoparametric 6, 8 and 9 node shell elements.

• Library of AISC, UK, European, German,

Chinese and Japanese cross sections.

• Member, plate and shell local and global

offsets.

• Beam and finite element thermal loads.

• Elastic supports defined in global or

reference joint coordinate system.

• Specified support joint displacements.

• Unlimited load cases.

• P-delta effects

•Master/slave DOF

Post: Beam and finite element code check andredesign• Beam and plate element code check and

redesign.

• API (incl. 21st edition), AISC, LRFD,

Norsok, Eurocode 3, Canadian, DNV, British

Standards and Danish DS449 code check.

• Creates updated model with redesigned ele-

ments.

• Modify code check parameters.

• Load combination capabilities.

• Supports codes from 1977 to present.

• Detailed and summary reports.

• Hydrostatic collapse analysis.

•Span (multi-member effects).

Joint Can: Tubular joint code check andredesign• Present and past codes including latest API

21st ed. supplement 2 and LRFD, Norsok,

DS449 and Canadian.

• API earthquake and simplified fatigue

analysis.

• Connection strength (50%) check.

• Overlapping joints analyzed.

• Minimum & extreme seismic analysis.

FEMGV: General Purpose Finite ElementData modeled and Results Viewer• Produced by Femsys Ltd.

• Generate complex finite element models.

• Exchange model data with Precede.

• Create meshes for ship hulls and

semisubmersibles.

• View post processor results in 3D.

• View detailed results contours, vectors,

deformed shapes, graphs and animations

for plate, shell and solid finite elements.

Concrete I / Concrete II: Reinforced concrete code check and redesign• Rectangular, Circular, Tee and L cross

sections.

• Beam, bi-axial beam-column, slab and wall

elements supported.

• Multiple reinforcement patterns can be

specified.

• Code check per ACI 318-89 (Revised

1992).

• Shear reinforcement check and redesign.

• Reinforcement development length check.

• Deflection and creep calculation.

• Second order/P-delta analysis capabilities.

Fatigue: Fatigue life evaluation and redesign• Spectral, time history and deterministic

fatigue analysis.

• Cyclic stress range calculation procedures

include wave search, curve fit and

interpolation.

• SCF calculations recommended by, API

(including 21st ed. supplements), HSE, DNV,

DS449 and Norsok Codes.

• Auto redesign.

• API (including 21st ed. supplements), AWS,

HSE and Norsok thickness dependent recom-

mended S-N curves.

•Multiple run damage accumulation

• Pierson-Moskowitz, JONSWAP, Ochi-

Hubble

double peaked and user defined spectra.

• Automated or user specified connection

details.

• Pile fatigue analysis.

• Creates wave spectra from scatter dia-

gram.

• Uses Paris equation to predict crack

growth

rate due to cyclic stresses.

• Load path dependent joint classifications.

• Includes wave spreading effects.

Interactive Fatigue: Interactive fatigue life evaluation• Shows the 3-D view of the connection and

allows for braces to be selected with the

mouse.

• Reads connection defaults when joint and/or

brace is/are selected, thus eliminating the need

to calculate and display SCFs before viewing

capacity or modifying properties.

• Recognizes all SCF and S-N options available

in the batch program.

• Allows SCF theory to be changed for any

type connection, including in-line

connections and connections with user

defined SCFs.

• Reports have been expanded and

reworked to make them easier to read.

• Reports and plots can be displayed on the

screen and/or saved to a file.

• Auto redesign.

PSI: Non-linear soil, pile and structure interaction• Beam column effects included.

• Non-uniform piles.

• P-Y and T-Z curves, axial adhesion and

springs.

• API P-Y, T-Z, skin friction and adhesion data

generated from soil properties per API.

• Shifted P-Y curves for mudslides.

• Full structural analysis and pile code

check API, LRFD, Norsok, HSE, DS449,

Canadian and DNV.

• Full plotting and graphical representation

of soil data and results, incl. stresses, P-Y,

T-Z curves.

• Pile stub superelements.

Pile: Isolated 3D pile analysis• Beam column and pile batter effects included.

• Uses PSI soil data.

• Optional pilehead springs.

• Graphical representation of soil data.

•Specify force at or below pilehead

•Specify pilehead displacements

• Specified pilehead forces or

displacements.

• Automatic generation of linear equivalent

pile stubs for dynamic or static analysis.

• Same plotting and code check features as

PSI.

Postvue: Interactive graphics postprocessor• Interactive member code check and redesign.

• Display shear and bending moment diagrams.

• Display deflected shapes for static and

dynamic analyses.

• Color plate stress contour plots.

• User control of all code check parameters.

• Code check and redesign by individual or

group of elements.

• Supports same codes as Post module.

• Extensive reporting and plotting capabilities.

• Color coded results and unity check plots.

• Creates updated input model file for

reanalysis.

• Labels UC ratio, stresses and internal forces

on elements.

Superelement: Automated substructure cre-ation and application• Unlimited number of superelements.

• Up to 1000 interface joints per superelement.

• User defined stiffness matrices.

• Full stress recovery.

• Superelements can contain other

superelements.

• Translation and rotation of superelements.

Combine: Common solution file utility• Combines dynamic and static results from one

or multiple solution files.

• Formats solution files for transfer between

different types of computers.

• Superimposes mode shapes.

• “Worst case” combination of dead loads

with earthquake response.

• Determine extreme wave loads from input

spectra.

Large Deflection (LDF): Large deflectionanalysis• Iterative solution for geometric

non-linearities.

• Solves plate membrane problems.

• Accounts for P-delta effects.

Collapse: Non-linear collapse analysis• Linear and non-linear material behavior.

• Non-linear springs.

• Sequential load stacking capability.

• Activate and deactivate elements.

• Joint Flexibility options.

• Impact analysis with automatic unloading,

built in DnV ship indentation curves and energy

absorption functionality.

• Load cases may contain loading and/or

specified displacements.

• Includes geometric non-linearities.

• Plastic members and finite elements.

• Includes piles with non-linear soils and

plasticity.

•Plastic DKT plates.

Collapse View: Interactive program for presentation and visualization of Collapse results• The program allows the user to display the

analysis procedure graphically including color

coded plasticity, formation of hinges,

foundation axial capacity utilization and

connection failures.

• DNV ship impact curves have also been added

to the program to determine the energy absorbed

by the ship during an impact with an offshore

installation.

• The structural deformation and the

progression of plasticity can be viewed as the

load is incrementally applied to show the

collapse mechanism clearly.

•Wide variety of graphing options including

base shear.

Dynpac: Dynamic characteristics• Householder-Givens solution.

• Guyan reduction of non-essential degrees of

freedom.

• Lumped or consistent structural mass genera-

tion.

• Automatic virtual mass generation.

• Complete Seastate hydrodynamic modeling.

• User input distributed and concentrated mass.

• Non-structural weight modeling.

• Full 6 DOF modes available for forced

response

analysis.

Wave Response: Dynamic wave response• Deterministic and random waves.

• Pierson-Moskowitz, JONSWAP, Ochi-Hubble

and user spectra.

• Fluid-structure relative velocity and

acceleration accounted for.

• “Modal Acceleration” and non-linear fluid

damping.

• Closed form steady state response in the

frequency domain.

• Zero crossing and RMS responses.

•Time history analysis of wave and wind

and time history load.

• Buoyancy dynamic loads included.

• Stress, internal load, base shear and overturn-

ing moment transfer function plots available.

• Full coupling with Fatigue program.

• Elastic dynamic response of floating

structures including stingers.

• Input and output Power Spectral Densities

with Probability Distributions.

Dynamic Response: General dynamic response and earthquake analysis• Frequency domain analysis.

• Time history, response spectrum or PSD base

driven input.

• Time history and harmonic force driven input.

• SRSS, CQC and Peak modal combinations.

• API response spectra library and user input

spectra.

• Earthquake time history library.

• Wind spectral loading capability

• Structural and fluid damping.

• Vibration analysis with multiple input points

with user specified frequencies and phasing.

• General periodic forces decomposed by

Fourier analysis (e.g., gas torques).

• Ice dynamics and impact load analysis.

• Engine/compressor vibration analysis.

• Response spectrum output at any joint.

•Equivalent static load and incremental

load output resulting from earthquake, ship

impact, dropped object and blast analysis.

This loading can be used for subsequent

linear static analysis or for non-linear

Collapse analysis.

Launch: Jacket launch analysis• Full launch motion time history analysis

including hydrodynamic forces in all directions.

• Time history of jacket and barge motions.

• All phases of launch included.

• Unbalanced loads generated for any

position.

• Launch sequence plot capability including

barge and jacket silhouette for designated

steps.

Flotation: Jacket flotation and upending analysis• Color coded snapshots of each upending step.

• Stability and upending analyses.

• Initial floating and on bottom positions provided.

• Upending steps can include multiple commands.

• Dual hook capabilities.

• Buoyancy tanks, valves, user specified buoyancy

and weights and hydrodynamic overrides.

• Properties, forces and positions plotted vs. step.

• Upending forces including gravity, sling loads,

buoyancy, and buoyancy tank loads generated for

any step of the upending sequence.

• Upending phase summary reports including

pitch, roll, and yaw angles, mudline clearance etc.

Tow: Transportation inertia load generator• Input motion for six degrees of freedom.

• Output location for selected points.

• Automatic weight calculation.

• User input member and joint weights.

• Generates distributed member and plate

loads.

• Converts user defined loads into inertias.

Motion/Stability: Ship Motion Analysis• Prediction of motions, displacements,

velocities and accelerations.

• Regular or Irregular seas.

• Bretschneider wave spectral model.

Linear Diffraction: Linear Diffraction Analysis• Produced by Martec Ltd.

• Prediction of ship motions.

• Includes mooring forces, current and

wind

forces.

• Hydrodynamic pressure distribution on

wetted hull of floating structures with/

without

steady forward speed or arbitrary headings.

Time-Domain Diffraction: Time History Second Order Wave Diffraction• Produced by Martec Ltd.

• Non-linear ship motions.

• Sea loads and hydrodynamic pressure

distribution.

• Time history.

• Regular or Irregular waves.

• Nonlinear Froude-Krylov and restoring

forces.

SACS/WAMIT and SACS/MORA: WAMIT a• Converts SACS model and wave information

into wave diffraction program model (eg.,

MORATM).

• Creates all input required for wave diffraction

analysis.

• Transfer functions include real and imaginary

portions for fatigue or extreme wave analysis.

SACS/WAMIT and SACS/MORA: WAMIT and MORA diffraction wave analysis interface• Converts SACS model and wave information

into wave diffraction program model (eg.,

MORATM).

• Creates all input required for wave diffraction

analysis.

• Transfer functions include real and imaginary

portions for fatigue or extreme wave analysis.

• Analyses multi-body problems with

connecting stiffnesses.

• Includes mooring lines.

• Performs workability analyses.

• Converts frequency and wave direction

dependent coefficients into SACS transfer

functions.

Gap: Non-linear analysis with one-way ele• Accurate simulation of loadout or

transportation analysis using one-way

elements.

Gap: Non-linear analysis with one-way elements• Accurate simulation of loadout or

transportation analysis using one-way

elements.

• Tension or compression gap elements

with initial gap.

• General non-linear elements.

•Friction element.

MTO: Material take-off, weight control and • Member lengths including cuts.

• Steel tonnage and C.G. location.

• Material list, cost estimate and weight control

reports.

MTO: Material take-off, weight control and cost estimation• Weld volume requirements and cost.

• Required protective anodes and cost.

• Surface area calculations by elevation.

Engineering Dynamics, Inc. has developed and marketed on a worldwide basis the proprietary SACS®

programs since 1973. The programs have been used by over 300 companies to design over 1000 offshore

platforms from the North Sea to the coast of Australia. The programs are completely supported and

maintained by EDI with the main support locations listed below.

Worldwide Support

HOME OFFICE

Engineering Dynamics Inc.

2113 38th Street

Kenner, LA 70065

USA

Tel: +1-504-443-5481

Fax: +1-504-443-6120

[email protected]

www.sacs-edi.com

AUSTRALIA

Representative:

WorleyParsons

Level 12, 333 Collins Street

Melbourne VIC 3000

Australia

Tel: +61 3 8612 5180

Fax: +61 3 8676 3573

[email protected]

www.worleyparsons.com

BRAZIL

Representative:

Dr. Nelson Szilard Galgoul

SUPORTE Consultoria e Projetos Ltda.

Rua Visconde de Inhuama 134/Gr. 505

20091-007 Rio de Janeiro

Brazil RJ

Tel: +55-21-2113-1717

Fax: +55-21-2113-1799

[email protected]

www.suporte-cp.com.br

EUROPE, CIS AND TURKMENISTAN

Representative:

MAREAL Engineering & Consulting

SACS Europe

Henry Dupouy or Olga Boiche

12, avenue du General de Gaulle 94550

Chevilly-Larue

Tel: 33 (0)1 4740 31 61

Fax: 33 (0)1 4665 81 30

[email protected]

[email protected]

www.mareal.eu

CHINA

Engineering Dynamics Inc.

2113 38th Street

Kenner, LA 70065

USA

Tel: +1-504-443-5481

Fax: +1-504-443-6120

[email protected]

www.sacs-edi.com

INDIA

Authorized Representative:

Aryatech Marine & Offshore Services

Pvt. Ltd.

B-1 Hauz Khas

New Delhi, 110016

India

Tarun Rewari

[email protected]

Mob: +91-9999009126

Tel: +91 (11) 46018102

Fax: + 91 (11) 46018103

INDONESIA

Agent:

PT Indonesian Service Bureau

Pradip Didwania

Jl. Pluit Karang Cantik VII

Blok R 3 U No. 9

Pluit

Jakarta 14450

Indonesia

Tel: +62-21-663 0164

Fax: +62-21-660 4521

PT Indonesian Service Bureau

Prince Centre, 6th Floor, Suit # 605

JI. Jend. Sudirman, Kav 3-4

Jakarta Pusat 10220

Indonesia

Tel: +6221 5733966

Fax: +6221 5738808

[email protected]

www.zee-eng.com

KOREA

Representative:

SACS Korea, Inc.

Suite 507, 508

Olympia Bldg. 196

Jamsilbon-Dong

Songpa-Ku

Seoul 138-759

Korea

Tel: +82-2-421-8018/8019/8155

Fax: +82-2-421-8154

[email protected]

www.sacs.co.kr

MALAYSIA & SINGAPORE

Representative:

Shrad Services

Ramesh Ramasundram

Level P, Block C

Kelana Square

Jalan SS 7/17

47301 Kelana Jaya

Selangor, Malaysia

Tel: 60 (3) 2073 7667

Mobile: 6012-288-5373

[email protected]

MEXICO

Representative:

DIPLAMAR, SA

Antonio Castillo Flores

Hda. de Xalpa 561-103

Col. Hda. del Parque

54769 Cuautitlan Izcalli,

Estado de Mexico

Tel: +52 (55) 5886-0042

+52(55) 5886-1294

Fax: +52 (55) 5886-0042

[email protected]

[email protected]

www.diplamar.com

MIDDLE EAST

(UAE, Qatar, Egypt, Saudi Arabia,

Kuwait & Bahrain)

Authorized Representative:

Aryatech Marine & Offshore Services

Tarun Rewari

Mob: +971 50 6519248

e-mail: [email protected]

NIGERIA

Representative:

Dr. Lola Amao

Lonadek Oil and Gas Consultants

285 Akin Olugbade Street

Victoria Island

Lagos, Nigeria

Tel: +01-7940883

Fax: +01-7912090

Mobile: 08033216064

[email protected]

www.lonadek.com

TEXAS

Representative:

enautix

16203 Park Row, Suite 130

Houston, TX 77084

Tel: 281-579-1913

Fax: 281-579-1982

Heather Mack, Analyst

[email protected]

mob: 281-455-1514

Curtis Owens, P.E., Engineer

[email protected]

Josh Olson

[email protected]

Kay McCallum

[email protected]

WESTERN AUSTRALIA

Representative:

John Caro

Application Technology & Specialties

108 Railway Street

Cottesloe

Western Australia 6011

Australia

Tel: +61-8-9384-0928

Mobile: +61-(0) 401 099765

[email protected]

95039632 SACS Software

Documents

Transcript of 95039632 SACS Software