Professional solar mounting systems
2
Rely on us as your competent part-ner for high quality and innovative products, with optimum service and certified safety.
40 years of experience in steel and aluminium processing as well as in light metal construction design.
Worldwide references
Schletter is the biggest supplier of solar mounting systems in Europe with more than 1200 staff members.
Experience from projects with a total power of more than 1500 MW.
Your professional partner for plan-ning, advice and production!
Schletter GmbH - Your partner for fast and safe solutions
3
Due to an in-house manufacturing of 100 % in our factory, you can rely on the high quality of our products.
For a production company, innovation means modern machine equipment and rational production. The new company building has sufficient space for a state-of-the-art machine park on a production area of 50,000 m². Thus, we can offer you constantly marketable product prices and react to your needs with flexibility, customer friendliness and speediness.
System competence and state-of-the-art production from one source
4
Comprehensive service
Fast delivery
Qualified technical advice
Free support programmes for plant planning on our website
Complete packaging
Special constructions on short notice
Project-related individual structural analyses
Documentation (system structural analyses, mounting instructions and much more)
Safety by means of quality
Quality management according to ISO 9001:2008
Comprehensive system certifications
Utilization of high quality materials (alu-minium /stainless steel 1.4301)
Production site in Bavaria/Germany 10-year durability guarantee* on all system components
*Further information and warranty conditions at www.schletter.eu
Universal and individual
Cost-efficient standard systems make any plant size possible
Comprehensive unit assembly system
Universal mounting solutions for any case of application
Minimum mounting times by means of patented detail solutions and pre-assembly in our plant
Permanent product development on the basis of our customers’ requests
Your advantages
5
Universal and individual
CompactVario
Roof hooks (tiled roof)
Wide range of fastening solutions for any case of application
Modular system solutions for any kind of roof construction
Individually optimized systems for big plants
Standard beams GridNorm with KlickTop
Supports
Hanger bolts (eternit roof)
Clamps (metal standing seams)
CompactDirect
Fix 2000 (Trapezoidal sheet metal)
CompactGrid
Loading systems
In-roof solutions
Industrial roof solutions
Module fastening systemsOptiBond
Park@Sol ®
…and many more solutions!
Open areaFS
Open areaPvMax3
Standard systems Project-specific solutions
Components
6
The wide range of different compo-nents and systems makes it possible to fix almost any module configuration on almost any roof by using Schletter systems! Due to high-quality and ela-borate components, you achieve short mounting times and reliable structural calculations.
Cost-efficient systems for pitched roofs
GridNorm
For all cases in which the module ar-rangement or the module type requires a two-layer cross-rail construction, GridNorm offers the most econo-mic solution! By combining different optimized profiles for the respective application with the patented Schlet-ter KlickTop rail-cross connector also here, time-optimized mounting is guaranteed.
Standard systems for pitched roofs
Schletter systems offer compatible fastening elements for nearly any kind of roof covering from tiled roofs up to different kinds of sheet metal roofs. Thus, in combination with the wide ran-ge of structurally optimized load-bearing profiles, economic and safe solutions are created for any roof size. The well-proven Schletter KlickSystem grants short mounting times with all systems.
Roof-integrated systems
Roof-integrated systems by Schletter can be combined with any current mo-dule type and offer the solution for the architectonically demanding customer.
Rapid 2+
The new system Rapid 2+ ® can be adjusted even better especially to tiled roofs and thus can satisfy our custo-mers in this quite frequent mounting situation with even shorter mounting times, minimization of the tools required and further structural optimizations. Of course, also with this system the known mounting rails and system solutions are used in order to be able to provide our customers maximum convenience with a minimum of storage space required.
7
Schletter flat roof systems
IsoTop
The system IsoTop allows the installa-tion of PV plants on membrane roofs of industrial buildings with big girder distances (up to 10m), even if the roof covering itself cannot absorb any ad-ditional loads. By means of individually produced fastening beams, all occur-ring forces are directly transmitted into the roof construction. Both planning and structural analysis are always indi-vidually carried out on the basis of data provided by the customer.
Economic solutions on flat roofs are always created when an optimum adaptation of the mounting system to the respective roof construction takes place. For this purpose, optimized support geometries according to the latest standard requirements with different inclinations and dimensions are used for Schletter flat roof systems. The multitude of accessories makes an installation on almost any roof possible. For every system, an individual plan-ning on the basis of data provided by the customer is carried out including a detailed structural analysis.
WindSafe
With the WindSafe system, special rear panel metal sheets are used in order to reduce the wind loads that impact flat roof plants to a minimum. Thus, either unit assembly systems (e.g. Compact-Vario) can be further optimized or individually optimized single solutions with special module arrangements for large-scale plants can be configured.
Flat roof system of the Compact series
By means of the systems CompactVario, CompactGrid and CompactDirect, an adaptation of the elevated system to any roof geometry is possible. In this manner, always the optimum and safest solution is created from an extensive system construction kit for any application with minimum load transmission into the roof or with a minimum loading on the flat roof. Bigger distances in the substructure can be bridged easily and safely.
8
PvMax3
The system PvMax3 is optimized for mounting on concrete strip foundations if a cast-in-place concrete or ready-mixed concrete construction technique is applied. In all cases in which a pile-driven foundation is not possible or not economic due to the soil conditions or the project dimensions, the PvMax3 system represents the alternative with concrete foundations. With this tech-nique, also foundations on landfill sites are possible, for example.
FS System
The system FS makes the fast and economic realization of big PV-projects with any module design possible. Pile-driven steel profiles with an optimized geometry are the basis of all systems of this construction series and at the same time guarantee long durability, optimum ground anchoring, minimum soil surface sealing and good accessibility for future plant maintenance operations. The module bearing construction is made of of aluminium and is delivered punc-tually and prefabricated to 100% in any required quantity on site: unfold it – put it on – done!
The mounting of the foundations, the bearing construction and also the instal-lation of modules can also be included in the offer on customer request. A complete machine park with more than 10 hydraulic pile drivers and our expe-rienced staff guarantee short assembly times also in case of bigger projects.
Schletter open area systems excel due to short mounting times, mounting times that are as short as possible, long durability and optimum efficiency for the respective project size. The structural analysis of every system is always car-ried out using project data based on the respective country-specific standards and grants absolute structural safety without any restrictions.
Schletter open area systems
9
This is the optimum solution for solar energy generation on big parking areas of any kind. The system can be combined with charging pillars of the construction type P-Charge® for a future electric company vehicle fleet.
More and more companies want to actively display their positive attitude towards alternative energies and thus also their future-orientated company philosophy. As a unit assembly system, the carport system Park@Sol® can be adapted individually to different module arrangements, different forms of par-king areas and last but not least to the respective company design.
The parking area of the future - Park@Sol ®S
ourc
e: ju
wi A
G
10
DIN 6700-2 component class C2
Manufacturer qualification according to DIN 18800-7:2002-09 class E
Manufacturer’s qualification according to DIN V 4113-3 class C aluminium
Our company is certified according to
DIN EN ISO 9001:2008
DIN EN ISO 3834 Part 2 Comprehensive quality requirements to the welding process
DIN EN 15085-2 Certification level CL1
Due to our wide-ranging measures regarding quality assurance, we grant you an extra voluntary durability guarantee* of 10 years!
*Further information and warranty conditions at www.schletter.eu
Safety on the basis of certified quality
11
Individual structural analyses for special constructions
Geological surveys for international open area plants
Worldwide mounting service for open area plants; own machine capa-city for installations on a scale of more than 1 MW per day!
www.schletter.eu
Make use of the numerous online features on our website!
International load determination
Calculation of superimposed load for flat roofs
Download area with information and plant planning
Delivery note service
Information on delivery status
Professional logistics service, on request with individual packaging for single plants
Regular workshops and trainings with competent lecturers
Technical department for advice and system planning including free structu-ral analysis for any individual project
Our service for your plant planning
© S
chle
tter G
mbH
, 201
1, I4
0000
2GB
, V8
Ordering and order processing Phone: +49 8072 9191 – 205Fax: +49 8072 9191 – 9205E-mail: [email protected]
Logistics servicePhone: +49 8072 9191 – 206Fax: +49 8072 9191 – 9206E-mail: [email protected]
Training informationPhone: +49 8072 9191 - 209Fax: +49 8072 9191 - 9209E-mail: [email protected]
Sales and distributionTel.: +49 8072 9191 – 480Fax: +49 8072 9191 – 9480E-mail: [email protected]
Technical advice and inquiries Phone: +49 8072 9191 – 201Fax: +49 8072 9191 – 9201E-mail: [email protected]
For a comprehensive and competent consulting with the planning of your plant as well as for questions concer-ning logistics and order processing, our members of staff are available from Monday to Friday from 7 am to 5 pm.
How tocontact us
Schletter GmbHAlustraße 183527 Kirchdorf / Haag i. OBGermanywww.schletter.eu
Top Related