Further information in secutex buffer pads can befound in our catalogue
buffer pads prong protection
Detailed information in the specialdemands of the tile industry canbe found in our secutex video
®
®
© T
OP
ART
200
1
secutex® is a trademark of SpanSet-secutex GmbH.
Impact Protection Catalogue
An Extra Layer of
Protection
secutex fork protection products
One Layer better
Fork shoes and equipment
for fork lift trucks
®
®
Protective Gripping for the Brick and Tile Industry
One Layer Better...
One Layer Better...
2
Take it with the secutex® Soft programme
For more information please contact our specialist or ask for our video.
● Maximum protection of fragile goods
● Very flexible● Easy fastening
● Maximum protectionfor the baked bricks
● Very flexible● Easy fastening
● Secure gripping prevents the brick from falling down
● Very flexible● Easy fastening
secutex® SPL-F-SoftIn the following stages of the brick and tile production secutex buffer pads are used:· loading of the large pallets· clearer lifter · turning lifter· setting machine · unload lifter
secutex® SPL-Soft-wedge
The SPL Soft-wedge is used when bricks often fall offthe lifter. The wedge shape prevents the bricks fromfalling. SPL-Soft wedge is especially suitable whenthe lifters are already quite old and worn.The SPLSoft-wedge must be adapted to suit your lifter. Ourflexible production enables us to manufacture toyour requirements. The fastening with screwsthrough the perforated steel sheet is easy.
secutex® SP-F-Soft-P1 with thinPowerflex coatingSP Soft with thin Powerflex coating is suitable forfragile bricks, tiles or ceramic parts. The thin, wearresistant PU coating does not alter the excellentflexibility of the secufoam. The fastening is madewith an adhesive. On request it is also possible tohave the perforated steel sheet at the bottom, sothat the buffer pad can be fastened with screws.
SPL-F-Soft
SPL-Soft-wedge
SP-F-Soft-P1
3
Technical specifications
®
®
For more information please contact our specialist or ask for our video.
Material secutex impact protection surfacesoptions
secutex-coating
secutex thin coating
secufoam®- Foam thickness* Materialoptions mm hardness
SPL-Soft yellow 5, 10, 20
SPL-Soft green 5, 10, 20
SPL-Soft blue 5, 10, 20
SPL-Soft white 10, 20
secutex impact protection baseoptions
Impact protection flat, with perforated plateImpact protection flat, w/o perf. plate
Available optionssecutex® SPL-F-Softsecutex® SPL-Soft-wedgesecutex® SP-F-Soft-P1
*) 5 mm secu-foam when there is only little space left between the lifter jaws and the bricks..10 mm adapts itself very well to the brick shape.
20 mm secu-foam adapts itself very well to the brick shape.
Other thicknesses are of course available.
DimensionsThickness: min. 10 mmWidth: 30-1000 mmLength: Standard length 3 m
Powerflex
Surface Optional textured surfaces
Smooth Polished Fabric Pyramid
VariationsSoft-wedge
Slots The slots have provento be very efficient forvery fragile bricks orbricks of irregularlengths.
Side Coating The secu-foam has a relatively low tear strength but can be protected on the lifter by the use of side coating.
SPL
SPL
The secu-foamhas a relatively lowtear strength butcan be protectedon the lifter by theuse of side
4
Smooth Grip for Tiles
In its standard version, SPL-Flat is used in manydifferent applications. On the turning lifters forexample, it is mounted onto the pressing plates.Finder lifters, other lifters and pulling devices areequipped with SPL-Flat. The compact secutexmaterial is elastic like rubber and has lowcompression. It can be easily fastened with screwsthrough the perforated steel sheet.
secutex® SPL-Flat
For more information please contact our specialist or ask for our video.
®
®
SPL-Flat with an 8 mm steel plate is a very rigidprofile which is very often used for loader lifters atthe bottom of the pressing plates. The 8 mm steelreinforcement enables strong fastening with screws.The compact secutex material is elastic like rubberand only has little flexibility.
● Can be fastened with screws● No adhesive required● Lasts longer
Secutex® Buffer pad-flatwith 8mm steel plate
secutex® Buffer pad divider
The secutex Buffer pad dividers are used for the safelifting of several rows of bricks at one time. The steelplate welded to the upper part provides a strong anddurable attachment point for screws.
5
®
®
Technical specifications
Perforated plate options
Perforated platePerforated plate normal, welded on8 mm steel plate
PUR-Available options surface thickness
secutex-normal: 75° Shore Asecutex-yellow: 55° Shore Asecutex-yellow: 75° Shore Asecutex-yellow: 90° Shore A
Available options
DimensionsThickness: min. 10 mmWidth: 30-1000 mmLength: Standard length 3 m
SPL-Flat
Quick and easy fastening by bolting, riveting, welding or gluing
For more information please contact our specialist or ask for our video.
Use the comprehensive enquiryform at the end of thiscatalogue to specify yourspecial requirement
i
Surface Optional textured surfaces
Smooth Polished Fabric Pyramid
6
The Right Strip for Conveyor Belts
The problem: Conveyor belts are used extensively in industry and inparticular the mining industry to rationalize the transport of variousgoods. Especially when bulk material is being transportedcontinuously, it is necessary to clean the conveyor belts continuallyfrom the sticking residue and dirt.
The solution: The secutex wear pad is a new wear pad for rubberconveyor belts and laminated belts. Due to the very good elasticity,the conveyor belts are cleaned properly and it is no longerneccessary to re-adjust the pads. The good rigidity of the structuremakes it durable.
®
®
secutex® Buffer pad as wear pad
The secutex wear pad is a modern composite plasticmaterial. It is a combination of:
● secutex polyurethane ( Shore hardness A 75 -80 ) with extreme wear resistance
● with a glass fibre reinforcement for secure fastening by using asteel plate and screws
The glass fibre layer has two functions:– Reinforcement for the elastic secutex which also restricts
elongation. An important advantage of the glass fibre webbingas a reinforcement is that the conveyor belts are not damagedby the glass fibre.
– Due to the glass fibre webbing, all the holes made for fasteningare far more resistant against tearing. Its good flexibilityenables the secutex wear pad to adapt itselt to the belts and toscratch off dirt even in difficult areas. The conveyor beltobviously remains cleaner, which is important for the life andthe wear characteristics of the complete conveyor installation.
With regard to costs, it is important to note that the secutex wearpad can be cut from longer lengths kept on stock - thus cheaper -and that both sides of the pad can be used.
● Simple mounting● Optimal adaptation ● Excellent cleaning / lasts long
PUR-Available options surface thickness
secutex-normal: 75° Shore Asecutex-yellow: 55° Shore Asecutex-yellow: 75° Shore Asecutex-yellow: 90° Shore A
Available options
Fastened types
Standard steel plate
Inlet types
Standard glass fiber reinforcement
For more information please contact our specialist or ask for our video.
Wear pad
DimensionsThickness:min. 10 mmWidth: 30-1000 mmLength: Standard length 5 m
7
Make Short Work of Rough Surfaces
Secutex buffer pad-hollow spaceThe SPL-hollow space is used for bricks with anespecially rough surface (for example coal burnt).The deformation of the hollow space ensures a safegrip of the bricks. The wedge shape prevents thebrick from slipping.
The SPL-hollow space has slots every 20 mm. Theindividual, fingers seize the fragile brick and level outirregularities.
For more information please contact our specialist or ask for our video.
®
®
The secutex SPL-hollow space is available in 2 versions:
secutex SPL-hollow 30 mm if only little space is available between the lifter jaws and the bricks
secutex SPL-hollow 50 mm adapts itself very well to the brick shape
Simple fastening with screws through the perforated steel sheet
PUR-Available options surface thickness
secutex-normal: 75° Shore A
Available optionsSPL-hollowSPL-HK
DimensionsLength: max. 1,5 m
● Maximum grip for rough bricks● Robust construction● Lasts longer
Available with all absorbing foams.
Available Options:
Soft-Tip
PUR-Tip Wedge Slots
Surface options:Structured surface Pyramid
Structured surface Fabric
®
®
secutex® Impact Protection-Soft
20 30 30 5010 15 25 10 15 25 15 20 30 10 15 20
SPL-soft SPL-soft SPL-soft SPL-soft SPL-soft SPL-soft SPL-HK SPL-Fwhite blue green white blue green hollow Powerflex Powerflex Powerflex space
profile
Minim
um in
form
ation
Minim
um in
form
ation
Enquiry Order form
Thickness totalin mm
Length: x
Width: mmSpecial options:
Soft tip
PUR-tip
Wedge
Slots
Surfaces:Fabric
Pyramid
Material hardness
15 25 15 20 30
Company:
Name:
Phone:/Fax:
Street/P.O.BOX:
Postal code/Town:
✘
Date Signature
Excellent impact absorption due to theflexible secu-foam layer. Variousabsorption material layersare available toprovide theoptimal solutionfor yourapplication.
SPL-
soft
whi
te
Pow
erfle
x
SPL-
soft
blue
Pow
erfle
x
SPL-
soft
gree
nPo
wer
flex
SPL-
soft
whi
te
SPL-
soft
blue
SPL-
soft
gree
n
hollo
w s
pace
prfil
e SP
L-H
K
SPL-
F
15 25 20 30 30 5010 15 25 10 15 25 15 20 30 15 20 30 10 15 20
Green and dryproducts
Applications
Thickness mm
Impactprotection
products
Sensitive,burned tiles
Burnedbricks
Feldbrannt-steine
Handformbricks withlarge tolerance
Package,Unload
Materialhardness
✘ ✘✘ ✘ ✘ ✘
✘ ✘✘ ✘
✘✘ ✘
®
®
secutex® Impact Protection
The upper layer is extremelyhard wearing
The middle layer is impactabsorbingThe lower layer provides asecure base for fastening
✘
Top Related