Automotive Interiors India 2016
©2016 H.B. Fuller Company
2
©2016 H.B. Fuller Company
Agenda
H.B. Fuller overview Markets we serve Adhesive technologies for the interior trim
3
H.B. Fuller Overview
Automotive
H.B. Fuller at a Glance
©2016 H.B. Fuller Company
5
©2016 H.B. Fuller Company
H.B. Fuller Around the World
6
©2016 H.B. Fuller Company
Enabling Sustainability
Helping customers minimise energy and water use and lessen waste through:
• Faster processing• Adhesion to lighter and
renewable materials• Reduction in waste• Safer use
7
Markets We Serve
8
©2016 H.B. Fuller Company
spoiler
automotivelighting
bumper assembly and plateswheel arch
cover wheel
pillars
bright work
protector
wheel trim
Automotive Exterior Trim
9
©2016 H.B. Fuller Company
trunk trim
headrest
glove box
instrument panel
headliner
door panel trunk floor
Acoustic : Noise Vibrations and Harshness
center console
A,B,C pillars
Automotive Interior Trim
10
H.B. Fuller Adhesive Technologies for the Interior Trim
11
©2016 H.B. Fuller Company
Water-based Adhesives
Thermonex™ water-based adhesives offer minimised production time through low activation temperature and short cooling time:• Reactive adhesives with very good heat
resistance performance and bonding strength, compared with non-reactive products
• Applied at ambient temperatures and are reactivated at low temperature therefore suitable for heat sensitive substrates
• Can be pre-applied to deliver a pre-coated substrate – end user to reactivate complex only
• Supports error reduction due to inadequate adhesive quantity and or adhesive spills
12
©2016 H.B. Fuller Company
Reactive Hot Melt Adhesives
Swift®lock reactive hot melt adhesives offer high performance bonds:
• Chemistry of the reactive hot melt makes them very compatible with a large variety of substrates used in the automotive industry
• Fast setting time of the reactive hot melts improve bonding process and reduce manufacturing costs
13
©2016 H.B. Fuller Company
Solvent-based Lamination Adhesives
Swift®col solvent based adhesives offer high performance in all applications:• Easy to use in lamination• Good for processes where variability may be
present
14
©2016 H.B. Fuller Company
Two Component PU Adhesives
Swift®bond adhesives offer fast set times to achieve high production rates across a wide range of substrates:• These adhesives yield a thermoset that boosts
high performance• Set times can be adjusted with proper formulations to be
adapted to the different manufacturing set lines
15
©2016 H.B. Fuller Company
Hot Melt Adhesives
Swift®melt and Swift®therm hot melt adhesives offer high tack:• Particularly indicated for fixation of a
wide range of wires, clips, and trim items together
• Special grades for lamination• Different types of hot melt adhesives for polar and non polar
substrates – the right selection provides a reliable bonding
16
©2016 H.B. Fuller Company
It’s the little things that can deliver the biggest innovations!
This presentation is for informational purposes only and does not constitute an offer by H.B. Fuller to sell or a warranty of any kind.
Join the Conversationwww.hbfuller.com/connect
17
18
©2016 H.B. Fuller Company
Disclaimer
Swift® and Thermonex® are trademarks of H.B. Fuller Company (“H.B. Fuller”) or an affiliated company of H.B. Fuller, and are registered in the European Community. Flexel™ is a trademark of H.B. Fuller Company (“H.B. Fuller”) and is registered in the USA.
IMPORTANT: The information, specifications, procedures and recommendations herein (together “information”) are based on our experience and we believe these to be accurate. No representation, guarantee or warranty is made as to the accuracy or completeness of the information or that the information will avoid losses or damages or give desired results. It is purchaser’s sole responsibility to test and determine the suitability of any product for the intended use. Tests should be repeated if materials or conditions change in any way. No employee, distributor or agent has any right to change these facts and offer a guarantee of performance. NOTE TO USER: by ordering/receiving product you accept the H.B. Fuller General Terms and Conditions of Sale applicable in the region. Please request a copy if you have not received these. These Terms and Conditions contain disclaimers of implied warranties (including but not limited to disclaiming warranties of fitness for a particular purpose) and limits of liability. All other terms are rejected. In any event, the total aggregate liability of H.B. Fuller for any claim or series of related claims however arising, in contract, tort (including negligence), breach of statutory duty, misrepresentation, strict liability or otherwise, is limited to replacement of affected products or refund of the purchase price for affected products. H.B. Fuller shall not be liable for loss of profit, loss of margin, loss of contract, loss of business, loss of goodwill or any indirect or consequential losses arising out of or in connection with product supply. Nothing in any term shall operate to exclude or limit H.B. Fuller’s liability for fraud, gross negligence or for death or personal injury caused by negligence or for breach of any mandatory implied terms.
Top Related