COM
MU
NIC
ATIO
NS
SYST
EM O
WN
ER’S
MA
NU
AL
Ingl
és 6
J001
2006
AG
(07
.09)
(G
T9)
6J00
1200
6AG
Portada Sist Comunicacion.qxd:Maquetación 1 7/9/09 16:52 Página 3
efully to familiarise yourself with
ill help preserve its value.
s and parts changes.
as it should be kept with the
Sist Comunicacion_EN.book Seite 1 Mittwoch, 15. Juli 2009 6:45 18
ForewordThis Instruction Manual and its corresponding supplements should be read car
your vehicle.
Besides the regular care and maintenance of the vehicle, its correct handling w
For safety reasons, note the information concerning accessories, modification
If selling the vehicle, give all of the onboard documentation to the new owner,
vehicle.
Sist Comunicacion_EN.book Seite 2 Mittwoch, 15. Juli 2009 6:45 18
Contents 3
Contents
Manual structure . . . . . . . . . . . . . . . . . . . .
Controls and equipment . . . . . . . . . . .
Communication . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice command mobile telephone installation -
Models: Altea / Altea XL / Altea Freetrack / Toledo
/ Leon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voice command mobile telephone installation -
Models: Ibiza / Ibiza SC . . . . . . . . . . . . . . . . . . .
Radiophones and business equipment . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
5
5
6
19
32
33
Sist Comunicacion_EN.book Seite 3 Mittwoch, 15. Juli 2009 6:45 18
Manual structure4
Manual structureWhat you should know before reading the on-board manualThis manual contains a description of the equipment supplied with the
vehicle at the time of press. Some of the equipment hereunder described will
not be available until a later date, or is only available in certain markets.
Because this is a general manual, some of the equipment and functions that are described in this manual are not included in all types or variants of the model or model year; they may vary or be modified depending on the tech-nical requirements and on the market or model year; this can not be inter-preted as dishonest advertising.
The illustrations are intended as a general guide and may vary from the
equipment fitted in your vehicle in some details.
The direction indications (left, right, front, rear) appearing in this manual
refer to the normal forward working direction of the vehicle except when
otherwise indicated.
The equipment marked with an asterisk* is supplied as standard on certain
versions of the model only, it can be supplied as an option on some models,
or else it is only on sale in certain countries.
® All registered marks are indicated with ®. Although the copyright symbol
does not appear, it is a copyrighted mark.
The section is continued on the following page.
This shows the end of the section.
WARNING
Texts preceded by this symbol contain safety information. They warn you of serious dangers, possibly involving accident or injury.
CautionTexts preceded by this symbol draw your attention to a possible risk of
damage to your vehicle.
For the sake of the environmentTexts preceded by this symbol refer to relevant points concerning environ-
mental protection.
NoteTexts preceded by this symbol contain additional information.
Sist Comunicacion_EN.book Seite 4 Mittwoch, 15. Juli 2009 6:45 18
Communication 5
Controls a
Sist Comunicacion_EN.book Seite 5 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Controls and equipment
Communication
Introduction
This system allows you to connect your mobile phone to the
vehicle and to use the hands-free mode.
The hands-free device means that the telephone can be used inside the
vehicle; the driver will not have to remove their hands from the steering wheel
nor will be distracted from traffic.
Note• The voice command system is only available in the following languages:
Spanish, German, English, French, Italian and Czech. Other languages (such
as Dutch or Portuguese) will have Spanish as the default language for voice
instructions, and the vehicle must be taken to an Authorised Service Centre
for the change to be made.
• There are certain versions of mobile telephone software that contain
errors. These errors may give rise to faulty operation of the vehicle hands-free
system. In this case, consult the Authorised Service Centre for your mobile
telephone.
• Some mobile devices do not respond correctly to the orders of the keypad
in hands-free mode. Always use the vehicle controls to interact with the
mobile phone.
Communication6
”
n be activated by the “press to talk” button
steering wheel ⇒ fig. 1.
ed while using the speech control system, the
k” button , wait a few seconds for the sound
mmands may be used. These commands may
ns of the hands-free telephone system as well
fers the option of creating and using a phone
system and independent of the mobile tele-contain 50 entries.
is made between the telephone and the hands-
dapter or Bluetooth adapter is available), the
ne SIM card are downloaded by the hands-free
Fig. 2 Steering wheel controls, depending on model version
AF
AF
Sist Comunicacion_EN.book Seite 6 Mittwoch, 15. Juli 2009 6:45 18
Voice command mobile telephone installation - Models: Altea / Altea XL / Altea Freetrack / Toledo / Leon
Basic functions
The voice command system can be activated by the “press to
talk” button, located on the multi-function steering wheel.
See ⇒ page 31, “Bluetooth®
Talk button
The voice command system ca
located on the multi-function
If one of these buttons is press
function is cancelled.
After pressing the “press to tal
signal, after which the vocal co
be used to manage the functio
as the phone book.
Phone book
The voice command system of
book belonging to the vehiclephone. This phone book may
Also, as soon as a connection
free system (if a compatible a
numbers stored in the telepho
Fig. 1 Controls on the steering wheel
Communication 7
Controls a
ystem from the steering wheel
can be used from the steering wheel.
mand system, it is possible to use the functions
the controls on the steering wheel and the
ed between your mobile telephone and the
book in your telephone and/or your SIM card
downloaded to the hands-free device.
to four minutes to fully download to the commu-
the system is used. The download process is
display.
en the connection is established between your
nds-free device, the phonebook in the tele-
hands-free device as well as lost calls, received
moment, the phone book of the telephone as
lls and last calls are available on the screen of
.
Fig. 3 Agenda menu depending on version
Sist Comunicacion_EN.book Seite 7 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
system and can be displayed on the vehicle instrument panel. These
numbers may be selected using the multi-function steering wheel and calls
can be made using the multi-function steering wheel.
WARNING
• Please concentrate on driving. As the driver, you have the responsibility for your safety and that of others. For this reason, you should only use the functions in a manner that allows you to maintain control of the vehicle in all situations - otherwise, you may create an accident risk!
• The speech system must not be used in cases of emergency, since the voice changes in stressful situations. This could result in a failed or delayed telephone connection. Always dial emergency numbers manually!
Note• If your mobile phone allows you to store several numbers (home, mobile,
office..) under the same name or entry, they will all be listed as independent
entries on the instrument panel screen, but under the same name.
• Depending on the mobile phone model, these entries will appear under
the same name with one different letter or character at the end. For example:
Antonio W, Antonio H, Antonio M.
Using the hands-free s
The hands-free system
As well as using the voice com
of the hands-free system from
radio.
When connection is establish
hands-free device, the phone
(depending on the phone) is
The phonebook may take up
nication system the first time
indicated on the dash panel
Depending on the version, wh
mobile telephone and the ha
phone is downloaded to the
calls and last calls. From this
well as lost calls, received ca
the vehicle instrument panel
Communication8
ge 6, fig. 2 to move around the options. The
d by pressing button ⇒ page 6, fig. 1 or
the steering wheel controls.
e 6, fig. 2 to scroll all the names in your phone-
ssed calls (phonebook only, depending on
to the selected number by pressing button
steering wheel controls or by selecting the
pressing button ⇒ page 6, fig. 2.
ted by pressing button ⇒ page 6, fig. 1 on
by selecting the option on the dash panel and
, fig. 2. The call can also be accepted by
nction button A on the radio ⇒ page 9, fig. 7.
Fig. 5 Example of a received call on the instru-ment panel
AE
AE
AK
AE
Sist Comunicacion_EN.book Seite 8 Mittwoch, 15. Juli 2009 6:45 18
The following options are available in the dash panel telephone menu:
PHONEBOOK, MISSED CALLS, RECEIVED CALLS, LAST CALLS. The telephone
menu can be accessed on the dash panel. Press button ⇒ page 6, fig. 1
or change menus in the panel using the steering wheel control buttons
and ⇒ page 6, fig. 2.
Example: Last calls / received calls
Use buttons and ⇒ pa
desired option may be selecte
button ⇒ page 6, fig. 2 on
Once selected on the menu:
Use buttons and ⇒ pag
book, last calls received or mi
versions). A call may be made
⇒ page 6, fig. 1 again on the
option on the dash panel and
An incoming call can be accep
the steering wheel controls or
pressing button ⇒ page 6
pressing using the multifu
AE
AI
AJ
Fig. 4 Example of the last call on the instrument panel
AG AH
AK
AG AH
AK
ok
Communication 9
Controls a
n.
ook ⇒ fig. 7. First access the telephone
, by pressing button ⇒ page 6, fig. 1.
to move around the menu and use button
honebook”. Once selected, the operation
g a name.
e display indicates ⇒ fig. 7 . To accept,
ge 6, fig. 1 or select “Accept” on the dash
, ⇒ page 6, fig. 2. If you want to reject
, press the multi-function button on
ep button on the steering wheel
.
port call waiting (see telephone manual to acti-
g on the version, you can manage call waiting
g. 6 Incoming call on the radio screen.
AE
AG
cel AB
AE
Sist Comunicacion_EN.book Seite 9 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Information on the dash panel and radio display
The hands-free system uses the screen on the dash panel and radio to display informatio
– To access the phone b
menu ⇒ page 7, fig. 3
Use buttons and
to select. Select “P
is the same for selectin
– For an incoming call th
press button ⇒ pa
panel using buttons
the incoming call,
the radio ⇒ fig. 6 or ke
controls pressed down
Some mobile telephones sup
vate this function). Dependin
Fi
Fig. 7 Phone book on the instrument panel
AG AH
AK
AE
AH
can
Communication10
alogue is immediately interrupted. The call can
he “answer call” button on the multi-
ressing multi-function button on the radio
ands when orders are not recognized.
d by the system, it will answer with the cue
can then be given once again clearly. After a
swer with <Cancel> and the dialogue will be
hat you are properly understood:
d without pauses or exaggerated pronuncia-
words.
nd sun roof closed if possible to avoid back-
ct the system.
away from the microphone (located on the
need to speak louder to drown out background
ehicle during a dialogue (e.g. other passengers
ystem is saying a cue.
e is directed towards the driver, therefore, only
e the system.
is heavy background noise we recommend
lephone book instead of speaking individual
takes when specifying telephone numbers.
t to be heard by the person on the other end of
cle microphone can be temporarily disabled
AE
AA
Sist Comunicacion_EN.book Seite 10 Mittwoch, 15. Juli 2009 6:45 18
(incoming call while another call is being taken). When the second call is
received, the information on the dash panel will be updated to indicate “Call
waiting” and the identity of the person/number calling. Use buttons ,
and on the steering wheel controls to select “Replace” to disconnect the
first conversation and start a conversation with the second incoming caller
(the call waiting) or “Reject” to continue talking with the first caller.
Dialogue
The voice command system can be activated via the “press to
talk” key on the phone adapter or the key on the multi-func-
tion wheel.
In this manual, Dialogue is defined as the time in which the speech control
system may receive vocal commands and provide assistance for completion
of different functions in case the user is hesitant and unsure how to proceed.
The system also responds by vocal messages. The dialogue is started and
interrupted by pressing the “press to talk” button ⇒ page 6, fig. 1.
If a call is received, then the di
be accepted by pressing t
function steering wheel or by p
⇒ page 9, fig. 6.
Assistance from control comm
If a command is not recognise
<Pardon?> and the command
third failure the system will an
ended.
Note the following to ensure t
• Speak in a normal tone an
tion.
• Avoid poor articulation of
• Keep the doors, windows a
ground noises that might affe
• Keep the air vents directed
interior light).
• At high speeds, you might
noises.
• Avoid other noises in the v
speaking in the vehicle).
• Avoid speaking when the s
• The hands-free microphon
the driver should try to operat
• To make a call when there
using the speech controlled te
digits. This will help avoid mis
Micro off
If, at any time, you do not wan
the line during a call, the vehi
AG AH
AK
Fig. 8 Current phone call
AF
ok
Communication 11
Controls a
ting the internal telephone book:
are used to carry out functions that
en.
ed during or at the end of a dialogue to carry out
tion
er this command, you can call a number that
s been recorded in the phone book under a
me.
er this command you can store a name with a
ephone number in the phone book
er this command you can delete a name from
phone book.
er this command you can listen to the names
red in the phone book
er this command you can choose to delete the
tire phone book or just a single name
tion
lephone number already entered is dialled.
ame is saved in the phonebook with its phone
mber
ncels a running dialogue.
Sist Comunicacion_EN.book Seite 11 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
. To do so, press the multi-function button on the radio ⇒ page 9,
fig. 6. To switch the microphone back on, press the multi-function button
on the radio again ⇒ page 9, fig. 6.
Controlling the hands-free unit by voice
The hands-free functions are also operated via voice
commands.
Help commands
The system confirms acceptance of speech commands verbally and guides
you through the dialogue if necessary.
Commands for operating the hands-free system
Speech commands for opera
Control commands
The control commands
have already been chos
The control commands are us
certain functions.
Possible commands
Speech command Action
HELP Following this command the system announces
possible orders
Speech command Action
DIAL NUMBER After this command you can specify a telephone
number and establish a connection
REDIAL After this command the last dialled telephone
number will be redialled
micro AA
AA
Speech command Ac
SELECT NAME Aft
ha
na
STORE NAME Aft
tel
DELETE NAME Aft
the
PLAY PHONE BOOK Aft
sto
DELETE PHONE BOOK Aft
en
Speech command Ac
DIAL Te
STORE A n
nu
CANCEL Ca
Communication12
e numbers:
as more than 20 digits, the system will decline
is too long>.
ed ahead of the 20 digits.
one number:
celled at any time by pressing button to
Message Action
tched <The number, please?>
Dialogue
<Zero, seven, three, one>
Dialogue
he system responds after about 5 seconds
<Possible com-mands are: Dial, repeat, back, or you can specify additional digits>
Dialogue
<Three, nine, two> Dialogue
<The number is being dialled.>
Dialogue -The
telephone
number
0731492 will be
dialled
End of dialogue
AF
Sist Comunicacion_EN.book Seite 12 Mittwoch, 15. Juli 2009 6:45 18
Dial number
A telephone number can be vocally specified to the system
and then dialled.
– Press button to talk ⇒ page 6, fig. 1. Activation of the system
is confirmed with by a tone.
– After the tone, say the command DIAL NUMBER.
After this command the system will then request you to specify a telephone
number. A connection will then be established to the specified number. The
telephone number can be specified all at once, in blocks of digits (separated
by a brief pause), or as single digits. You can specify the digits from zero to
nine. After each block of digits you specify (separated by a brief pause) the
system will repeat the digits. The system can only recognise single digits
(two, three, etc.), and not combinations of digits (e.g. twenty-three).
Notes on specifying telephon
• If the telephone number h
and give the cue <The number
• A Plus (+) can also be plac
Example for entering a teleph
A running dialogue can be can
talk.
REPEAT The specified name or all of the digits specified
up to this point will be repeated. The system will
then give the cue <Please proceed> so that you
can specify additional digits or commands.
CORRECTION The specified name or the last entered block of
digits will be deleted. The system will then give
the cue <Please proceed> so that you can specify
additional digits or commands.
ERASE All specified digits will be deleted. The system
will then give the cue <The number is deleted. Please, proceed> so that you can specify new
digits or commands.
AF
Speech com-mand
Condition
DIAL NUMBER Phone swi
on
for example, ZERO, SEVEN, THREE, ONE
If no command is specified, t
with the next cue.
No command
THREE, NINE, TWO
DIAL
Communication 13
Controls a
r 50 names and numbers. You can specify the
e specified all at once, in blocks of digits (sepa-
single digits. After each block of digits you
pause) the system will repeat the digits. The
ngle digits (two, three, etc.), and not combina-
ree).
into the telephone book.
Message Action
e book <The name, please?>
Dialogue
<Please repeat the name>
Dialogue
<The number, please?>
Dialogue
<Zero, one, two, three>
Dialogue
<Four, five, six> Dialogue
the system responds after about 5 seconds
Sist Comunicacion_EN.book Seite 13 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Redial
– Press button to talk ⇒ page 6, fig. 1.
– After the tone, say the command REDIAL.
After giving the command the last number dialled via the hands-free system
will be dialled again.
Example for the REDIAL command:
A running dialogue can be cancelled at any time by pressing button to
talk.
To record names in the phone book
You can store names along with a telephone number in the
internal telephone book.
– Press button to talk ⇒ page 6, fig. 1. The beep tone indicates
that the system is ready.
– After the tone, say the command STORE NAME.
After giving the command the system will request you to specify a name and
telephone number to store in the internal telephone book. The telephone
book has enough memory fo
digits from zero to nine.
The telephone number can b
rated by a brief pause), or as
specify (separated by a brief
system can only recognise si
tions of digits (e.g. twenty-th
Say STORE to store the entry
Speech command Condition Message Action
REDIAL Phone switched
on
<The number is being dialled.>
Dialogue
End of dialogue
AF
AF
AF
Speech command Condition
STORE NAME Telephon
is not full
COMPANY XYZ
COMPANY XYZ
ZERO, ONE, TWO, THREE
FOUR, FIVE, SIX
If no command is specified,
with the next cue.
Communication14
one book
⇒ page 6, fig. 1.
ommand SELECT NAME
d this command, you may select a stored entry
ll the required number. The system best recog-
rson who stored the name.
from the internal telephone book
celled at any time by pressing button to
Message Action
n, tele-
k con-
es.
<The name, please?>
Dialogue
<Company XYZ> Dialogue
he system responds after about 5 seconds
<Possible com-mands are: dial, repeat, back>
Dialogue
<The number is being dialled.>
Dialogue - The
telephone
number for Com-
pany XYZ is
being dialled
End of dialogue
AF
Sist Comunicacion_EN.book Seite 14 Mittwoch, 15. Juli 2009 6:45 18
A running dialogue can be cancelled at any time by pressing button to
talk.
Note• If the telephone number has more than 20 digits, the system will decline
and give the cue <The number is too long>.
• A Plus (+) can also be placed ahead of the 20 digits.
• Say the command delete or back to delete or correct the corresponding
block of digits.
• Say repeat to have all the digits that have been recognised up to that
point repeated.
• If two or more names sound alike, it is better to save the names including
the first name or some other distinguishing entry.
• A running dialogue can be cancelled at any time by pressing button to
talk.
• The telephone book works only in conjunction with the hands-free speech
control system; the entries are not stored on the phone's SIM card.
Calling a name in the ph
– Press button to talk
– After the tone, say the c
After the system has recognise
from the telephone book to ca
nises names spoken by the pe
Example for selecting a name
A running dialogue can be can
talk.
No command <Possible com-mands are: Store, repeat, back, delete, or you can specify addi-tional digits>
Dialogue
STORE <The name is saved.>
Dialogue - The
name COMPANY
XYZ with the tele-
phone number
0123456 will be
stored
End of dialogue
AF
AF
Speech command Condition
SELECT NAME Phone is
switched o
phone boo
tains entri
COMPANY XYZ
If no command is specified, t
with the next cue.
No command
DIAL
AF
Communication 15
Controls a
ry:
e phone book
rom the internal telephone book.
⇒ page 6, fig. 1. The beep tone indi-
s ready.
command DELETE NAME.
u can delete a stored entry from the internal tele-
ames from the internal telephone book:
Message Action
ebook
entries -
talk
on
he entry
led.
<The number is being dialled.>
The selected
name will be
repeated. The tel-
ephone number
will be dialled.
End of dialogue
Message Action
hone
tains
<The name, please?> Dialogue
<Do you want to delete the entry Company XYZ?>
Dialogue
F
Sist Comunicacion_EN.book Seite 15 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Listening to the phone book
You can have the entries stored in the internal telephone book
read out to you.
– Press button to talk ⇒ page 6, fig. 1. The beep tone indicates
that the system is ready.
– Say the command PLAY PHONE BOOK.
After giving the command the system will read out the entries stored in the
phone book. If you press button to talk, the corresponding telephone
number will be dialled on hearing a name. Once the dialogue is complete and
the system is reactivated, you can also select an entry to call by specifying the
stored name.
Example for the PLAY PHONE BOOK command:
Example for selecting an ent
To erase names from th
You can delete entries f
– Press the talk button
cates that the system i
– After the tone, say the
After giving this command yo
phone book.
Example for deleting single n
Speech command Condition Message Action
PLAY PHONE BOOK
The telephone
book contains
entries.
The telephone
book will then be
read out.
End of dialogue
AF
AF
Speech command Condition
PLAY PHONE BOOK
The phon
contains
Press the
button
hearing t
to be dia
Speech command Condition
DELETE NAME The telep
book con
entries.
COMPANY XYZ
AF
A
Communication16
e internal telephone book:
Message Action
one
ains
<Would you like to delete the whole phone book?>
Dialogue
he system responds after
t cue.
Dialogue
<Possible com-mands are: Yes, no>
Dialogue
<Are you sure?> Dialogue
he system responds after
t cue.
Dialogue
<Possible com-mands are: Yes, no>
Dialogue
<The phone book is deleted.>
All entries in the
phone book will
be deleted.
End of dialogue
Sist Comunicacion_EN.book Seite 16 Mittwoch, 15. Juli 2009 6:45 18
A running dialogue can be cancelled at any time by pressing button to
talk.
Note• Say the command Repeat, if you would like to have the specified name
repeated by the system.
• If you then say No, the system will answer with <Cancel> and the dialogue
will be ended.
To erase the phone book
You can delete the entire phone book or single entries.
– Press the talk button ⇒ page 6, fig. 1.
– After the tone, say the command DELETE PHONE BOOK.
After giving this command you can delete the entire internal phone book or
single entries as desired.
Example for deleting the entirIf no command is specified, the system responds after about 5
seconds with the next cue.
Dialogue
No command <Possible commands are: yes, no, repeat, back>
Dialogue
YES <The name is deleted.> Dialogue
End of
dialogue
AF
AF
Speech command Condition
DELETE PHONE BOOK
The teleph
book cont
entries.
If no command is specified, t
about 5 seconds with the nex
No command
YES
If no command is specified, t
about 5 seconds with the nex
No command
YES
Communication 17
Controls a
ok
and suggestions when using the
stored in the phone book have a noticeable
them so the system can recognise the entries.
hone book entry is not recognised (e.g. if
a name), the phone book entries can be read out
PHONE BOOK.
are recognised by the system. Say the numbers
recognise them easily.
unction is not possible>, check the status of the
.
?
tered?
<Possible com-mands are: Yes, no>
Dialogue
<The name is deleted.>
The entry will be
deleted and the
remaining
entries will be
read out.
s are End of dialogue
Sist Comunicacion_EN.book Seite 17 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Example for deleting single names from the internal telephone book:
Notes on the phone bo
Take note of these tips
phone book.
• It is important that names
acoustic difference between
• In the event that an telep
someone else tries to call-up
by giving the command PLAY
• The numbers zero to nineclearly so that the system can
Should the system say <The fhands-free system as follows
• Is the phone switched on
• Has the PIN code been en
Speech command Condition Message Action
DELETE PHONE BOOK
The telephone
book contains
entries.
<Would you like to delete the whole phone book?>
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
No command <Possible com-mands are: Yes, no, repeat>
Dialogue
NO The telephone
book will then be
read out.
No command Talk button
pressed as the
entry to be
deleted is read
out.
<Do you want to delete the entry (name)?>
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
No command
YES
All entrie
read out.
Communication18
<Three, nine, two> Dialogue
<The number is being dialled.>
Dialogue
End of
dialogue
Sist Comunicacion_EN.book Seite 18 Mittwoch, 15. Juli 2009 6:45 18
WARNING
The speech system must not be used in cases of emergency, since the voice changes in stressful situations. This could result in a failed or delayed tele-phone connection. For this reason, always enter emergency numbers manually.
International calls
Country and area codes can be entered as follows.
Notes on entering telephone numbers for calls abroad:
• When making a call abroad, you can say plus (+) before specifying the
digits.
• After the plus (+) the country code must be specified. The country code
follows the conventional format (e.g. 49 for Germany or 44 for Great Britain.
• After the country code, the zero (0) should be left out before the area
code.
Example for making a call to Great Britain:
Speech command Condition Message Action
DIAL NUMBER Phone is
switched on.
<The number, please?> Dialogue
PLUS, FOUR, FOUR
<Plus, four, four> Dialogue
SEVEN, THREE, ONE
<Seven, three, one> Dialogue
THREE, NINE, TWO
DIAL
Communication 19
Controls a
anage the functions of the hands-free telephone
book.
fers the option of creating and using an phone
e system and independent of the mobile tele-
contain 50 entries.
iving. As the driver, you have the responsibility thers. For this reason, you should only use the llows you to maintain control of the vehicle in u may create an accident risk!
not be used in cases of emergency, since the uations. This could result in a failed or delayed ys dial emergency numbers manually!
Sist Comunicacion_EN.book Seite 19 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Voice command mobile telephone installation - Models: Ibiza / Ibiza SC
Basic functions
The voice command system can be activated with the “press
to talk” button, located on the multi-function control.
See ⇒ page 31, “Bluetooth®”
Talk button
The voice command system can be activated with the “press to talk”
button located on the multi-function control.
If one of these buttons is pressed while using the voice command system, the
function is cancelled.
After pressing the “press to talk” button ⇒ fig. 9, wait a few seconds for
the sound signal, after which the vocal commands may be used. These
commands may be used to m
system as well as the phone
Phone book
The speech control system of
book belonging to the vehicl
phone. This phone book may
WARNING
• Please concentrate on drfor your safety and that of ofunctions in a manner that aall situations - otherwise, yo
• The speech system mustvoice changes in stressful sittelephone connection. Alwa
Fig. 9 Talk button on the multi-function control
AC
AC
Communication20
Sist Comunicacion_EN.book Seite 20 Mittwoch, 15. Juli 2009 6:45 18
Using the hands-free system from the multi-function control
The hands-free system can be activated using the multi-func-
tion control.
As well as using the voice command system, it is possible to use the functions
of the hands-free system from the multi-function controls.
When connection is established between your mobile telephone and the
hands-free device, the phonebook in your telephone and/or your SIM card
(depending on the phone) is downloaded to the hands-free device.
Depending on the version, when the connection is established between your
mobile telephone and the hands-free device, the phonebook in the tele-
phone is downloaded to the hands-free device to recognise the contact of the
incoming call and the outgoing call. This phonebook cannot be managed
from the multi-function control. It cannot be viewed on the radio screen.
Fig. 10 Multi-function control:
Communication 21
Controls a
incoming call is being made is associated with
book then the name will be displayed on the
g. 11 Example of an incoming call from the radio splay
Sist Comunicacion_EN.book Seite 21 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Example of incoming call
An incoming call can be accepted by pressing the “answer call” button
⇒ fig. 12 on the multi-function control and from the radio control
⇒ fig. 11.
If the number from which the
a name in the existing phone
radio display.
Fidi
Fig. 12 Multi-function control:
AE
AA
Communication22
he call, press multi-function button on the
ess multi-function button on the radio
bile phone coverage is displayed on the radio
tem can be activated with the “press
on the multi-function control.
fined as the time in which the speech control
mands and provide assistance for completion
he user is hesitant and unsure how to proceed.
vocal messages. The dialogue is started and
AB
AB
Fig. 15 Current phone call
Sist Comunicacion_EN.book Seite 22 Mittwoch, 15. Juli 2009 6:45 18
Information on radio display
An incoming call is indicated on the display. To accept, press button on
the multifunction control or multi-function button on the radio
⇒ page 21, fig. 11. To reject t
radio ⇒ page 21, fig. 11.
To cancel the outgoing call, pr
⇒ page 21, fig. 11.
Information regarding the mo
display.
Dialogue
The voice command sys
to talk” button, located
In this manual, Dialogue is de
system may receive vocal com
of different functions in case t
The system also responds by
Fig. 13 Incoming call
Fig. 14 Outgoing phone call
AE
AA
Communication 23
Controls a
ulti-function button on the radio ⇒ page 21,
k on, press the multi-function button on the
1.
free unit by voice
s are also operated via voice
nce of speech commands verbally and guides
ecessary.
hands-free system
tion
llowing this command the system announces
ssible orders
tion
ter this command you can specify a telephone
mber and establish a connection
ter this command the last dialled telephone
mber will be redialled
AA
AA
Sist Comunicacion_EN.book Seite 23 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
interrupted by pressing the “press to talk” button ⇒ page 21, fig. 12 or
by pressing on the radio screen.
If a call is received, then the dialogue is immediately interrupted. The call may
be accepted by pressing the key “answer” on the multi-function control.
Assistance from control commands when orders are not recognized.
If a command is not recognised by the system, it will answer with the cue
<Pardon?> and the command can then be given once again clearly. After a
third failure the system will answer with <Cancel> and the dialogue will be
ended.
Note the following to ensure that you are properly understood:
• Speak in a normal tone and without pauses or exaggerated pronuncia-
tion.
• Avoid poor articulation of words.
• Keep the doors, windows and sun roof closed if possible to avoid back-
ground noises that might affect the system.
• Keep the air vents directed away from the microphone (located on the
interior light).
• At high speeds, you might need to speak louder to drown out background
noises.
• Avoid other noises in the vehicle during a dialogue (e.g. other passengers
speaking in the vehicle).
• Avoid speaking when the system is saying a cue.
• The hands-free microphone is directed towards the driver, therefore, only
the driver should try to operate the system.
• To make a call when there is heavy background noise we recommend
using the speech controlled telephone book instead of speaking individual
digits. This will help avoid mistakes when specifying telephone numbers.
Micro off
If, at any time, we do not wish to be heard by the person on the other end of
the line during a call, the vehicle microphone can be temporarily discon-
nected. To do so, press the m
fig. 11 during the call.
To switch the microphone bac
radio again ⇒ page 21, fig. 1
Controlling the hands-
The hands-free function
commands.
Help commands
The system confirms accepta
you through the dialogue if n
Commands for operating the
AC
ok
Speech command Ac
HELP Fo
po
Speech command Ac
DIAL NUMBER Af
nu
REDIAL Af
nu
Communication24
be vocally specified to the system
⇒ page 21, fig. 12. Activation of the
th by a tone.
ommand DIAL NUMBER.
will then request you to specify a telephone
n be established to the specified number. The
cified all at once, in blocks of digits (separated
digits. You can specify the digits from zero to
you specify (separated by a brief pause) the
he system can only recognise single digits
binations of digits (e.g. twenty-three).
specified name or all of the digits specified
o this point will be repeated. The system will
n give the cue <Please proceed> so that you
specify additional digits or commands.
specified name or the last entered block of
its will be deleted. The system will then give
cue <Please proceed> so that you can specify
itional digits or commands.
pecified digits will be deleted. The system
then give the cue <The number is deleted. ase, proceed> so that you can specify new dig-
r commands.
Sist Comunicacion_EN.book Seite 24 Mittwoch, 15. Juli 2009 6:45 18
Speech commands for operating the internal telephone book:
Control commands
The control commands are used to carry out functions that
have already been chosen.
The control commands are used during or at the end of a dialogue to carry out
certain functions.
Possible commands
Dial number
A telephone number can
and then dialled.
– Press the talk button
system is confirmed wi
– After the tone, say the c
After this command the system
number. A connection will the
telephone number can be spe
by a brief pause), or as single
nine. After each block of digits
system will repeat the digits. T
(two, three, etc.), and not com
Speech command Action
SELECT NAME After this command, you can call a number that
has been recorded in the phone book under a
name.
STORE NAME After this command you can store a name with a
telephone number in the phone book
DELETE NAME After this command you can delete a name from
the phone book.
PLAY PHONE BOOK After this command you can listen to the names
stored in the phone book
DELETE PHONE BOOK After this command you can choose to delete the
entire phone book or just a single name
Speech command Action
DIAL Telephone number already entered is dialled.
STORE A name is saved in the phonebook with its phone
number
CANCEL Cancels a running dialogue.
REPEAT The
up t
the
can
CORRECTION The
dig
the
add
ERASE All s
will
Pleits o
AC
Communication 25
Controls a
.
command REDIAL.
last number dialled via the hands-free system
and:
ncelled at any time by pressing the talk button
phone book
ong with a telephone number in the
k.
. The beep tone indicates that the system
command STORE NAME.
system will request you to specify a name and
the internal telephone book. The telephone
Message Action
itched <The number is being dialled.>
Dialogue
End of dialogue
C
Sist Comunicacion_EN.book Seite 25 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Notes on specifying telephone numbers:
• If the telephone number has more than 20 digits, the system will decline
and give the cue <The number is too long>.
• A Plus (+) can also be placed ahead of the 20 digits.
Example for entering a telephone number:
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 19, fig. 9.
Redial
– Press the talk button
– After the tone, say the
After giving the command the
will be dialled again.
Example for the REDIAL comm
A running dialogue can be ca
⇒ page 20, fig. 10.
To record names in the
You can store names al
internal telephone boo
– Press the talk button
is ready.
– After the tone, say the
After giving the command the
telephone number to store in
Speech command Condition Message Action
DIAL NUMBER Phone switched
on
<The number, please?>
Dialogue
for example, ZERO, SEVEN, THREE, ONE
<Zero, seven, three, one>
Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.
No command <Possible com-mands are: Dial, repeat, back, or you can specify additional digits>
Dialogue
THREE, NINE, TWO
<Three, nine, two>
Dialogue
DIAL <The number is being dialled.>
Dialogue -The tel-
ephone number
0731492 will be
dialled
End of dialogue
AC
Speech command Condition
REDIAL Phone sw
on
A
AC
AC
Communication26
celled at any time by pressing the talk button
as more than 20 digits, the system will decline
is too long>.
ed ahead of the 20 digits.
r back to delete or correct the corresponding
digits that have been recognised up to that
d alike, it is better to save the names including
istinguishing entry.
cancelled at any time by pressing the talk
only in conjunction with the hands-free speech
not stored on the phone's SIM card.
<Possible com-mands are: Store, repeat, back, delete, or you can specify addi-tional digits>
Dialogue
<The name is saved.>
Dialogue - The
name COMPANY
XYZ with the tele-
phone number
0123456 will be
stored
End of dialogue
Sist Comunicacion_EN.book Seite 26 Mittwoch, 15. Juli 2009 6:45 18
book has enough memory for 50 names and numbers. You can specify the
digits from zero to nine.
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (two, three, etc.), and not combina-
tions of digits (e.g. twenty-three).
Say STORE to store the entry into the telephone book.
A running dialogue can be can
⇒ page 20, fig. 10.
Note• If the telephone number h
and give the cue <The number
• A Plus (+) can also be plac
• Say the command delete o
block of digits.
• Say repeat to have all the
point repeated.
• If two or more names soun
the first name or some other d
• A running dialogue can be
button .
• The telephone book works
control system; the entries are
Speech command Condition Message Action
STORE NAME Telephone book
is not full
<The name, please?>
Dialogue
COMPANY XYZ <Please repeat the name>
Dialogue
COMPANY XYZ <The number, please?>
Dialogue
ZERO, ONE, TWO, THREE
<Zero, one, two, three>
Dialogue
FOUR, FIVE, SIX <Four, five, six> Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.
No command
STORE
AC
AC
Communication 27
Controls a
book
stored in the internal telephone book
⇒ page 20, fig. 10. The beep tone indi-
s ready.
Y PHONE BOOK.
system will read out the entries stored in the
talk button as an entry is being read, the
number for that entry. Once the dialogue is
activated, you can also select an entry to call by
BOOK command:
Message Action
hone
tains
The telephone
book will then be
read out.
End of dialogue
C
AC
Sist Comunicacion_EN.book Seite 27 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Calling a name in the phone book
– Press the talk button .
– After the tone, say the command SELECT NAME
After the system has recognised this command, you may select a stored entry
from the telephone book to call the required number. The system best recog-
nises names spoken by the person who stored the name.
Example for selecting a name from the internal telephone book
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 20, fig. 10.
Listening to the phone
You can have the entries
read out to you.
– Press the talk button
cates that the system i
– Say the command PLA
After giving the command the
phone book. If you press the
system will call the telephone
complete and the system is re
specifying the stored name.
Example for the PLAY PHONE
Speech command Condition Message Action
SELECT NAME Phone is
switched on, tele-
phone book con-
tains entries.
<The name, please?>
Dialogue
COMPANY XYZ <Company XYZ> Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.
No command <Possible com-mands are: dial, repeat, back>
Dialogue
DIAL <The number is being dialled.>
Dialogue - The
telephone
number for Com-
pany XYZ is being
dialled
End of dialogue
AC
AC
Speech command Condition
PLAY PHONE BOOK
The telep
book con
entries.
A
Communication28
mes from the internal telephone book:
celled at any time by pressing the talk button
if you would like to have the specified name
em will answer with <Cancel> and the dialogue
Message Action
one
ains
<The name, please?> Dialogue
<Do you want to delete the entry Company XYZ?>
Dialogue
he system responds after about 5 Dialogue
<Possible commands are: yes, no, repeat, back>
Dialogue
<The name is deleted.> Dialogue
End of dia-
logue
Sist Comunicacion_EN.book Seite 28 Mittwoch, 15. Juli 2009 6:45 18
Example for selecting an entry:
To erase names from the phone book
You can delete entries from the internal telephone book.
– Press the talk button ⇒ page 19, fig. 9. The beep tone indi-
cates that the system is ready.
– After the tone, say the command DELETE NAME.
After giving this command you can delete a stored entry from the internal tele-
phone book.
Example for deleting single na
A running dialogue can be can
⇒ page 19, fig. 9.
Note• Say the command Repeat,repeated by the system.
• If you then say No, the syst
will be ended.
Speech command Condition Message Action
PLAY PHONE BOOK
The telephone
book contains
entries; the talk
button is
pressed as the
entry is being
read out.
<The number is being dialled.>
The selected
name will be
repeated. The tel-
ephone number
will be dialled.
End of dialogue
AC
AC
Speech command Condition
DELETE NAME The teleph
book cont
entries.
COMPANY XYZ
If no command is specified, t
seconds with the next cue.
No command
YES
AC
Communication 29
Controls a
ames from the internal telephone book:
<Possible com-mands are: Yes, no>
Dialogue
<The phone book is deleted.>
All entries in the
phone book will
be deleted.
End of dialogue
Message Action
hone
tains
<Would you like to delete the whole phone book?>
Dialogue
the system responds after
xt cue.
Dialogue
<Possible com-mands are: Yes, no, repeat>
Dialogue
The telephone
book will then be
read out.
n
s the
e
read
<Do you want to delete the entry (name)?>
Dialogue
the system responds after
xt cue.
Dialogue
AC
Sist Comunicacion_EN.book Seite 29 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
To erase the phone book
You can delete the entire phone book or single entries.
– Press the talk button ⇒ page 19, fig. 9.
– After the tone, say the command DELETE PHONE BOOK.
After giving this command you can delete the entire internal phone book or
single entries as desired.
Example for deleting the entire internal telephone book:
Example for deleting single n
Speech command Condition Message Action
DELETE PHONE BOOK
The telephone
book contains
entries.
<Would you like to delete the whole phone book?>
Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
No command <Possible com-mands are: Yes, no>
Dialogue
YES <Are you sure?> Dialogue
If no command is specified, the system responds after
about 5 seconds with the next cue.
Dialogue
AC
No command
YES
Speech command Condition
DELETE PHONE BOOK
The telep
book con
entries.
If no command is specified,
about 5 seconds with the ne
No command
NO
No command Talk butto
pressed a
entry to b
deleted is
out.
If no command is specified,
about 5 seconds with the ne
Communication30
e used in cases of emergency, since the voice s. This could result in a failed or delayed tele-ason, always enter emergency numbers
can be entered as follows.
umbers for calls abroad:
d, you can say plus (+) before specifying the
try code must be specified. The country code
at (e.g. 49 for Germany or 44 for Great Britain.
zero (0) should be left out before the area
reat Britain:
Message Action
n.
<The number, please?> Dialogue
<Plus, four, four> Dialogue
<Seven, three, one> Dialogue
Sist Comunicacion_EN.book Seite 30 Mittwoch, 15. Juli 2009 6:45 18
Notes on the phone book
Take note of these tips and suggestions when using the
phone book.
• It is important that names stored in the phone book have a noticeable
acoustic difference between them so the system can recognise the entries.
• In the event that an telephone book entry is not recognised (e.g. if
someone else tries to call-up a name), the phone book entries can be read out
by giving the command PLAY PHONE BOOK.
• The numbers zero to nine are recognised by the system. Say the numbers
clearly so that the system can recognise them easily.
Should the system say <The function is not possible>, check the status of the
hands-free system as follows.
• Is the phone switched on?
• Has the PIN code been entered?
WARNING
The speech system must not bchanges in stressful situationphone connection. For this remanually.
International calls
Country and area codes
Notes on entering telephone n
• When making a call abroa
digits.
• After the plus (+) the coun
follows the conventional form
• After the country code, the
code.
Example for making a call to G
No command <Possible com-mands are: Yes, no>
Dialogue
YES <The name is deleted.>
The entry will be
deleted and the
remaining entries
will be read out.
All entries are
read out.
End of dialogue
Speech command Condition
DIAL NUMBER Phone is
switched o
PLUS, FOUR, FOUR
SEVEN, THREE, ONE
Communication 31
Controls a
me mobile telephones contain errors or limited
load phone book”). These errors may give rise
icle hands-free system. In this case, consult the
your mobile telephone.
onality of the Bluetooth connection
phone and the hands-free system for
tion of the connection is required.
ands-free system and the mobile telephone
eed, first the Bluetooth function on the mobile
Then, after switching on the ignition, select the
one to search for other Bluetooth communica-
ich will include the hands-free system of the
tep is to select this hands-free system. The
pleting this operation should be found in the
ephone.
the connection is to enter the PIN code for the 234). Where the PIN code for the SEAT_BT
tact any official SEAT dealer. Once the PIN code
is established and the system can be used with
oment that the connection is established, the
ute sound.
procedure is complete, whenever your mobile vice are within range of establishing a Blue-blished as long as the ignition is switched on,
onfiguration.
Sist Comunicacion_EN.book Seite 31 Mittwoch, 15. Juli 2009 6:45 18
nd equipment
Bluetooth®
Bluetooth technology enables wireless connections between
mobile and fixed devices without needing cables.
Mobile communication and information is gaining ever greater importance
for personal use as well as in today's modern business world.
Information transfer between mobile devices up until recently was only
possible through wired and infrared connections.
These non-standardised connections greatly limited the range of use and
were very complicated to operate.
For this reason, the introduction of the Bluetooth® technology represents a
great change, allowing the establishment of a standardised remote connec-
tion between mobile devices from different manufacturers.
WARNING
The Bluetooth function must be switched off during air travel (please refer to the phone manual).
NoteCertain software version of so
functions (for example “Down
to faulty operation of the veh
Authorised Service Centre for
Bluetooth®
Before using the functi
between the mobile tele
the first time configura
It will be necessary that the h
recognise each other. To proc
telephone must be activated.
option on your mobile teleph
tion devices within range, wh
vehicle (SEAT_BT). The next s
complete instructions for com
instruction manual for the tel
The final step for establishing
hands-free device (initially 1system is to be changed, con
is input then the connection
the Bluetooth system. The m
hands-free kit will emit an ac
Once this initial configuration
phone and the hands-free detooth connection, this is esta
without the need for further c
THREE, NINE, TWO
<Three, nine, two> Dialogue
DIAL <The number is being dialled.>
Dialogue
End of
dialogue
Communication32
ower does not exceed 10 Watts at the aerial
e will be able to inform you about options for
phones with a higher transmitting power.
usiness equipment is permitted provided that
the concentration of the driver and that they
trofitted to the vehicle that may have an effect
iver must come with a specific licence for this
E symbol
ctric and electronic equipment in this vehicle
uld lead to the withdrawal of the vehicle regis-
n circumstances.
pay special attention to the instructions
lephones and radio transmitters.
Sist Comunicacion_EN.book Seite 32 Mittwoch, 15. Juli 2009 6:45 18
The connection between the telephone and the hands-free system will not be established if this system is already communicating with another phone.
If there are two or more Bluetooth telephones within communication range of
the hands-free system then the system will connect with the one that was
most recently connected.
WARNING
• When your mobile phone establishes a connection with the hands-free system, it emits both a visual and audible signal.
• It should be noted that when driving at night with the radio off, the visual signal involves the screen lighting up for approximately 3 seconds.
NoteIt is important to personalise the device PIN code using a personal 4 digit
code. Consult an official SEAT workshop.
Radiophones and business equipment
Radiophones and fixed installation business equipment
Radiophones
Any retrofit installations of radiophones in the vehicle require prior approval.
SEAT generally authorises in-vehicle installations of approved types of radio-
phones provided that:
• the aerial is installed correctly,
• the aerial is installed on the exterior of the vehicle (and shielded cables
are used together with non-reflective aerial trimming),
• the effective transmitting p
base.
Your Authorised Service Centr
installing and operating radio
Business equipment
The retrofit of domestic and b
these do not have an effect on
are CE approved. Equipment re
on the concentration of the dr
type of vehicle and with the C
Note• The posterior fitting of ele
affects its licence type and co
tration document under certai
• We would request that you
regarding the use of mobile te
Index 33
Index
BBasic functions . . . . . . . . . . . . . . . . . . . . . . . . 6, 19
Bluetooth® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Bluetooth® communication configuration . . . . 31
CCalling a name in the phone book . . . . . . . . 14, 27
Control commands . . . . . . . . . . . . . . . . . . . . 11, 24
Controlling the hands-free unit by voice . . . 11, 23
DDial number . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 24
Dialogue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 22
EExample of incoming call . . . . . . . . . . . . . . . . . . 21
IInformation on the dash panel and radio display 9
International calls . . . . . . . . . . . . . . . . . . . . . 18, 30
LLast calls / received calls . . . . . . . . . . . . . . . . . . . 8
Listening to the phone book . . . . . . . . . . . . . 15, 27
NNotes on the phone book . . . . . . . . . . . . . . . 17, 30
RRadiophones and fixed installation business
equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 25
TTo erase names from the phone book . . . . . 15, 28
To erase the phone book . . . . . . . . . . . . . . . 16, 29
To record names in the phone book . . . . . . . 13, 25
UUsing the handsfree system from the multi-function
control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the hands-free system from the steering
wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sist Comunicacion_EN.book Seite 33 Mittwoch, 15. Juli 2009 6:45 18
COM
MU
NIC
ATIO
NS
SYST
EM O
WN
ER’S
MA
NU
AL
Ingl
és 6
J001
2006
AG
(07
.09)
(G
T9)
6J00
1200
6AG
Portada Sist Comunicacion.qxd:Maquetación 1 7/9/09 16:52 Página 3
Top Related