GENERAL CATALOGUE
R
Italiana Membrane S.p.A. was established in 1988 and has
been increasingly successful in its sales activity becoming one of
the main manufacturers in the field of waterproofing products
for building, not only in Italy but also on an international scale.
The constant technological development of the manufacturing
lines has led Italiana Membrane to extend its range of prod-
ucts. Now it includes all kinds of APP and SBS bitumen
modified membranes, thermal insulation materials laminat-
ed to waterproofing membranes and bituminous shingles.
Italiana Membrane's premises are at Pasiano (Porde-
none) and occupy an area of 50,000 m2 of which about
25,000 are covered.
Approx. 65% of the total produced quantities is
absorbed by the Italian market while the remaining
35% is exported to most of the European coun-
tr ies, Middle East, Far East, Afr ica, USA and
Canada.
To be competitive on the expor t markets
Italiana Membrane manufactures products
complying with the most severe standards,
achieving quality certificates issued by presti-
gious certification bodies.
The key of the successful activity of Italiana
Membrane resides in the high quality of
research and controls before and during
production.
Besides carefully checking the raw materials used (bitumens, polymers, carri-
ers), control on finished products is constantly carried out by testing cold flexibility, mechanical
performances, etc., also after thermal ageing.
The manufacturing lines of Italiana Membrane are extremely adaptable and the technical staff consists of experienced
technicians. This enables us to produce a very wide range of products utilising many different carriers and compounds
with a variety of finishes.
2
CONCESSIONI E COSTRUZIONI AUTOSTRADE S.p.A.
R
tecnotteesstt ag
3
INDEX
ANTI-ROOT
VAPOUR
LAMINATED
METAL
Elastomeric membranes (SBS)SCUDOELAST P4 AGRÉMENT 4SCUDOELAST FCTR 180/V 4GAMMAELAST FCTR 160/V 4DELTAELAST TNT 5ECOELAST TNT/V 5BETAELAST TNT 5
Self-adhesive SBSmembranesSCUDOTENE FC/V 6SCUDOTENE V POLYNET 6SCUDOTENE FOUND 6
Elastoplastomeric membranes(APP)SCUTUMPLAST FCTR 180 AGRÉMENT 7SCUTUMPLAST BIARMATO AGRÉMENT 7SCUTUMPLAST FCTR 250/180/160 7SCUDOPLAST CAR 10SCUDOPLAST TNT/V 8GAMMAPLAST / GAMMAGUM 8DELTAPLAST / DELTAGUM 8SIGMAPLAST 9TROPICAL 9OMEGA 9SCUDOBASE 10
Poe membranes (POE) SCUDOCENE M25/MINERAL 11SCUDOCENE L20/MINERAL 11
Anti-root membranesSCUDOGARDEN PP 10
Radon barriersRADONSTOP 11RADONSTOP P 11
Metal surfaced membranesRAME 45 ALLUMINIO 30/40 - 40 COLOR 12
Products forasbestos-sheetsencapsucationVERFIX 13ELASTOCOVER 13
Liquid waterproofing productsSCUDOFLEX 13SCUDOCOLOR 13
Vapourbarriers, vapourdiffusion layers, separationlayers, seal stripsFIX POINT ALU / V 11DIFO POINT ALU / V 11SCUDOVAPOR 10PERFOPLAST 10BITUMINISED PAPERFELTS 12
Ancillary productsSCUDOFOND 10AIR VENTS 14VERPRIM 14BASEBIT 14SCUDOALL 14BITOX 14DRAINING OUTLETS 14ROOFING TORCHES 14LAYERTEX - LAYERGLASS 14RECUPERBIT 14LEAF-GRATE 14SEAL STRIP 12
Insulation panelsSCUDOTHERM PST 15SCUDOTHERM PSE/H25 AE 15SCUDOTHERM PSE/L20 AE 15SCUDOTHERM PU/VV 16SCUDOTHERM PU/CL 16SCUDOTHERM LR/H150 17SCUDOTHERM LR/L100 17SCUDOTHERM BOARD LR/H150 18SCUDOTHERM BOARD PSE/H25 AE - L20 AE 18SCUDOTHERM ONDA 19SCUDOTHERM GRECA 19
Bituminous shinglesWIDE RANGE OF STYLES 22WIDE RANGE OF COLOURS 23
Ancillary products forbituminous shinglesPREFABRICATED RIDGE SHINGLE 23BITUMEN BASED MASTIC 23AIR VENTS 23PUNTO APP BITUMINOUS MEMBRANE 23PINEWOOD BATTENS 23PLYWOOD 23FIXING NAILS 23NAILING MACHINE 23EXPANSIONS BOLTS 23SELF TAPPING SCREW 23SNOW BREAKER 23INSECT BARRIER 23
4
SCUDOELAST
SCUDOELAST is a very high quality SBS (styrenebutadiene styrene) polymer bitumen modifiedmembrane.It is available with the following reinforcements:
• spunbond non-woven polyester (type FCTR180). Other weights are available on request.
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks subjected tostrong mechanical stresses, e.g. tensile structures,metal deckings, pre-fabricated decks and/or when-ever operation temperatures down to -25 °C arerequired. Plain versions require suitable protectionagainst UV rays.Mineral versions are used mainly as a cap sheet.
GAMMAELAST
GAMMAELAST is a high quality SBS (styrenebutadiene styrene) polymer bitumen modifiedmembrane.It is available with the following reinforcements:
• spunbond non-woven polyester (types FCTR160). Other weights are available on request.
• glass fibre (types V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks subjected tomechanical stresses, e.g. tensile structures, metaldeckings, pre-fabricated decks and/or with verycold climates.Plain versions require suitable protection againstUV rays.Mineral versions are used mainly as a cap sheet.
SCUDOELAST P4
SCUDOELAST P4 is a very high quality SBS(styrene butadiene styrene) polymer bitumenmodified membrane.
The carrier is a spunbond composite polyesterwith glass fibre reinforcement threads.
The Mineral version is surfaced with natural greyslate chips. Other colours (red, green, brown andwhite) are available on request.
The product has obtained the I.T.C. TechnicalApproval Certificate No. 609/03 dated 22/09/03.
Use: on civil and industrial decks subjected tostrong mechanical stresses, with operation tem-peratures down to -25 °C, also in single layerapplications.
Plain version requires suitable protection againstUV rays. Mineral version is used mainly as a capsheet.BBA certification 99/2640/C
SCUDOELAST P4Thickness Rolls per pallet
4.1 mm 25**
SCUDOELAST P4 MINERALThickness Rolls per pallet
4 mm (on selvedge) 23**
GAMMAELAST FCTR 160 - VThickness Rolls per pallet
3 mm 25
4 mm 20
5 mm 16
GAMMAELAST FCTR 160 MINERALWeight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 18
GAMMAELAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
3 kg/m2 23
4 kg/m2 20
SCUDOELAST FCTR 180 - VThickness Rolls per pallet
3 mm 25
4 mm 20
5 mm 16
SCUDOELAST FCTR 180 MINERALWeight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 16
SCUDOELAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
-25 °C -25 °C -20 °C
** Roll length 7.5 mt
For the mineral (SLATED) coloured version white, red, green and brown, etc,the company does not guarantee the permanence in time of the colour.
All the rolls are 10 m long, unless differently specified.Technical data could be
modified without prior notice.
99/2640/C
5
DELTAELAST
DELTAELAST is a high quality SBS (styrene buta-diene styrene) polymer bitumen modified mem-brane.It is available with the following reinforcements:
• non-woven polyester (type TNT). Other typeof polyester are available on request.
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks subjected tomechanical stresses, e.g. tensile structures, metaldeckings, pre-fabricated decks and/or with verycold climates.Plain versions require suitable protection againstUV rays.Mineral versions are used mainly as a cap sheet.
BETAELAST
BETAELAST is an SBS (styrene butadiene styrene)polymer bitumen modified membrane .It is available with a non-woven polyester rein-forcement (TNT).
• glass fibre (typeV).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey red,green, brown and white).Use: on civil and industrial decks subjected tomechanical stresses, e.g. tensile structures, metaldeckings, pre-fabricated decks and/or with cold cli-mates. Plain versions require suitable protectionagainst UV rays.Mineral versions are used mainly as a cap sheet.
ECOELAST
ECOELAST is an SBS (styrene butadiene styrene)polymer bitumen modified membrane .It is available with the following reinforcements:
• non-woven polyester (type TNT) Other type ofpolyester are available on request.
• glass fibre (typeV).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks subjected tomechanical stresses, e.g. tensile structures, metaldeckings, pre-fabricated decks and/or with verycold climates. Plain versions require suitable pro-tection against UV rays.Mineral versions are used mainly as a cap sheet.
DELTAELAST TNTThickness Rolls per pallet
3 mm 25
4 mm 20
5 mm 16
DELTAELAST TNT MINERALWeight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 18
ECOELAST TNTThickness/Weight Rolls per pallet
4 mm 20
5 mm 16
3 mm 25
ECOELAST TNT MINERALWeight Rolls per pallet
4 kg/m2 25
4,5 kg/m2 23
ECOELAST VThickness/Weight Rolls per pallet
2 mm 30 (15 m long)
3 mm 30
ECOELAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 25
4,5 kg/m2 23
BETAELAST TNTWeight Rolls per pallet
3 kg/m2 33
4 kg/m2 25
5 kg/m2 20
BETAELAST TNT MINERALWeight Rolls per pallet
4 kg/m2 20
4.5 kg/m2 18
BETAELAST VWeight Rolls per pallet
2 kg/m2 35 (15 m long)
3 kg/m2 33
4 kg/m2 25
DELTAELAST VThickness Rolls per pallet
2 mm 25 (15 m long)
3 mm 25
4 mm 20
DELTAELAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
-20 °C -10 °C-15 °C
** Roll length 7.5 mt
For the mineral (SLATED) coloured versionwhite, red, green and brown, etc,the company does not guarantee the permanence in time of the colour.
All the rolls are 10 m long, unless differently specified.
6
SCUDOTENE
These products are available with the followingreinforcements:
• spunbond non-woven polyester (type FC)
• non-woven polyester (type TNT)
• glass fibre (type V)
• aluminium foil or glass fibre + aluminium foil(type ALU).
The Mineral versions are surfaced with slate chipsavailable in different colours.
Use: types FC,TNT and V can be cold applied inany roofing system.Type ALU is used as a vapour barrier.
SCUDOTENE FOUND
This product is reinforced with glass fibre.The top face is covered with a polyester geotex-tile.The product is also available with polyester film +glass fibre reinforcement giving excellent resis-tance to perforation (mechanical anti-root).
Use: cold applied on foundations, vertical walls,underground structures, etc. where high protec-tion and draining characteristics are required.
SCUDOTENE V POLYNET
This product is reinforced with glass fibre and issurfaced with a special high resistance polypropy-lene net.
Use: cold applied in any roofing system where avery high resistance to perforation and/or punc-ture is required, e.g. on flat roofs protected withgravel ballasting or concrete pavings, as a mechani-cal anti-root layer in roof gardens, on foundationsand vertical walls.
SCUDOTENE V POLYNETThickness Rolls per pallet
2.5 mm 23 (15 m long)
3 mm 25
3.5 mm 23
SCUDOTENE FOUNDThickness Rolls per pallet
approx. 5 mm(2 mm on selvedge) 16
SCUDOTENE FC - TNTThickness Rolls per pallet
2 mm 25 (15 m long)
2.5 mm 23 (15 m long)
3 mm 25
SCUDOTENE VThickness Rolls per pallet
1.5 mm 25 (20 m long)
2 mm 25 (15 m long)
2.5 mm 23 (15 m long)
SCUDOTENE ALUThickness Rolls per pallet
2 mm 25 (15 m long)
3 mm 25
SCUDOTENE FC - TNT - V - MINERALWeight Rolls per pallet
3.5 kg/m2 25
4 kg/m2 23
4.5 kg/m2 20
-20 °C -20 °C -20 °C
For the mineral (SLATED) version in white, red, green and brown, the company does not guarantee thepermanence in time of the colour.All the rolls are 10 m long, unless differently specified.
SCUDOTENE is a complete range of SBS (styrene butadiene styrene) polymer bitumen modified membranes.The compound is formulated with specialtackifying resins, to achieve high adhesive properties.They can be installed without torching in all the cases where traditional torch applied products are not advisable, such as on non-fire resistant foam insula-tion materials, in presence of inflammable materials (metal cisterns or tanks, underground pipes), on wooden decks, etc. Using SCUDOTENE products it isalso possible to build up full cold applied self-adhesive waterproofing systems.The Mineral versions are used mainly as a cap sheet, also for single layer roofrenewal. Plain versions require suitable protection against UV rays.
SELF-ADHESIVE SELF-ADHESIVE SELF-ADHESIVE
SCUTUMPLAST FCTR180/MINERAL
SCUTUMPLAST P/MINERALSCUTUMPLAST FCTR 180 is a very high qualityAPP (atactic polypropylene) polymer bitumenmembrane.
SCUTUMPLAST P/MINERAL renforced withcomposite stabilized spunbond polyester. Theproduct has an excellent dimensional stability.
It is reinforced with a 180 g/sqm spunbond non-woven polyester.The Mineral version is surfaced with natural greyslate chips.Other colours (red, green, brown and white) areavailable on request.SCUTUMPLAST FCTR 180 and P have obtainedthe ICITE Technical Approval Certificate n°598/03 dated 26/05/03.
SCUDOPLASTFCTR 250 / 180 / 160
SCUDOPLAST is a very high quality APP (atacticpolypropylene) polymer bitumen modified mem-brane.
The product is reinforced with a high perfor-mance spunbond non-woven polyester with dif-ferent weights (type FCTR 250 / 180 / 160).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: SCUDOPLAST FCTR 250 is mainly used onroad engineering works and whenever high elas-ticity and mechanical resistance are required.SCUDOPLAST FCTR 180 / 160: on civil andindustrial decks where high resistance to mechani-cal stresses and/or operation temperatures downto -15 °C are required.
SCUTUMPLASTDOUBLE REINFORCEMENT
SCUTUMPLAST BIARMATO is a very high quali-ty APP (atactic polypropylene) polymer bitumenmembrane.It has a double reinforcement consisting of a glassfibre mat and a spunbond non-woven polyesterThe product features excellent dimensional stabili-ty and mechanical performances.
SCUTUMPLAST BIARMATO has obtained theICITE Technical Approval Certificate n° 540/99.
Use: on civil and industrial decks, foundations,parkings, pre-fabricated, wooden or metal decks.It is particularly suitable to use on road and bridgedecks, viaducts, etc.The product can also be used for single layer roofrenewal.
Also available in fire resistant version AgrémentUBAtc 99/2859.
Use: on civil and industrial decks, foundations,parkings, pre-fabricated, wooden or metal decks.The product can also be used for single layer roofrenewal.
The Mineral version is used mainly as a cap sheet,also in single layer roofing systems.
BBA Certification 97/3397/C
Also available in fire resistant version.
Fire certification UBAtc 99/2859.
SCUTUMPLAST FCTR 180Thickness Rolls per pallet
4.1 mm 23
SCUTUMPLAST FCTR 180 MINERALThickness Rolls per pallet
4 mm (on selvedge) 16
SCUTUMPLAST BIARMATOThickness Rolls per pallet
4.1 mm 20
SCUTUMPLAST BIARMATOFIRE RESISTANT
Thickness Rolls per pallet
4 mm 20
SCUDOPLAST FCTR 250Thickness Rolls per pallet
4 mm 23
5 mm 16
SCUDOPLAST FCTR 180 / 160Thickness Rolls per pallet
3 mm 28
4 mm 23
SCUDOPLAST FCTR 180160 MINERAL
Weight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 16
-15 °C -15 °C -15 °C
7
For the mineral (SLATED) coloured version white, red, green and brown, etc,the company does not guarantee the permanence in time of the colour.
All the rolls are 10 m long, unless differently specified.
CERTIFIEDp r E N 1 1 8 7 - 1
SCUDOPLAST TNTSCUDOPLAST V
SCUDOPLAST is a very high quality APP (atacticpolypropylene) polymer bitumen modified mem-brane.It is available with the following reinforcements:
• non-woven polyester (type TNT)
• glass fibre (typeV).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks where operationtemperatures down to -15 °C are required.
8
SCUDOPLAST TNTThickness Rolls per pallet
3 mm 28
4 mm 23
5 mm 16
SCUDOPLAST TNT MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 16
SCUDOPLAST VThickness Rolls per pallet
2 mm 28 (15 m long)
3 mm 28
4 mm 23
SCUDOPLAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
-15 °C
GAMMAPLASTGAMMAGUM
GAMMAPLAST is a high quality APP (atacticpolypropylene) polymer bitumen modified mem-brane.
It is available with the following reinforcements:
• spunbond non-woven polyester (typeGAMMAGUM FC 160)
• non-woven polyester (type TNT)
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks where operationtemperatures down to -10 °C are required.
GAMMAPLAST TNTGAMMAGUM FC 160
Thickness Rolls per pallet
3 mm 28
4 mm 23
5 mm 16
GAMMAPLAST TNTGAMMAGUM FC 160 MINERAL
Weight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 16
GAMMAPLAST VThickness Rolls per pallet
2 mm 28 (15 m long)
3 mm 28
4 mm 23
GAMMAPLAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
-10 °C
DELTAPLASTDELTAGUM
DELTAPLAST is a good quality APP (atacticpolypropylene) polymer bitumen modified mem-brane.It is available with the following reinforcements:
• spunbond non-woven polyester (typeDELTAGUM FC)
• non-woven polyester (type TNT)
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks where operationtemperatures down to -10 °C are required.
DELTAPLAST TNT - DELTAGUM FCThickness Rolls per pallet
3 mm 28
4 mm 23
5 mm 16
DELTAPLAST TNT - DELTAGUM FCMINERAL
Weight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
5 kg/m2 16
DELTAPLAST VThickness Rolls per pallet
2 mm 28 (15 m long)
3 mm 28
4 mm 23
DELTAPLAST V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
-10 °C
For the mineral (SLATED) version in white, red, green and brown, the company does not guarantee the permanence in time of the colour.
All the rolls are 10 m long, unless differently specified.
9
SIGMAPLAST
SIGMAPLAST is an APP (atactic polypropylene)polymer bitumen modified membrane.
It is available with the following reinforcements:
• spunbond non-woven polyester (type FC)
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks where operationtemperatures down to -5 °C are required.
SIGMAPLAST FCThickness Rolls per pallet
3 mm 28
4 mm 23
5 mm 16
SIGMAPLAST FC - V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 20
SIGMAPLAST VThickness Rolls per pallet
2 mm 28 (15 m long)
3 mm 28
4 mm 23
-10 °C
OMEGA
OMEGA is an APP (atactic polypropylene) poly-mer bitumen modified membrane.
It is available with the following reinforcements:
• non-woven polyester (type TNT)
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks where operationtemperatures of about 0 °C are required. Plainversions can be used also as an underlayer.
TROPICAL
TROPICAL is an APP (atactic polypropylene)polymer bitumen modified membrane.
It is available with the following reinforcements:
• non-woven polyester (type TNT)
• glass fibre (type V).
The Mineral versions are surfaced with slate chipsavailable in different colours (natural grey, red,green, brown and white).
Use: on civil and industrial decks where operationtemperatures down to -5 °C are required.
TROPICAL TNTWeight Rolls per pallet
3 kg/m2 33
4 kg/m2 25
5 kg/m2 20
TROPICAL TNT - V MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 23
4,5 kg/m2 23
TROPICAL VWeight Rolls per pallet
2 kg/m2 33 (15 m long)
3 kg/m2 33
4 kg/m2 25
OMEGA TNTWeight Rolls per pallet
3 kg/m2 33
4 kg/m2 25
5 kg/m2 20
OMEGA TNT MINERALWeight Rolls per pallet
3,5 kg/m2 25
4 kg/m2 25
4,5 kg/m2 23
OMEGA VWeight Rolls per pallet
2 kg/m2 33 (15 m long)
3 kg/m2 33
4 kg/m2 25
-5 °C 0 °C
For the mineral (SLATED) version in white, red, green and brown, the company does not guarantee the permanence in time of the colour.
All the rolls are 10 m long, unless differently specified.
SCUDOPLAST CAR
SCUDOPLAST CAR is a very high quality APP(atactic polypropylene) polymer bitumen modifiedmembrane.It is reinforced with a special high weight spun-bond non-woven polyester giving ver y highmechanical performances.The product complies with the technical require-ments issued by the Italian Motorway Company.Use: on road engineering works such as bridgedecks, viaducts, car parks, etc.
10
SCUDOPLAST CARThickness Rolls per pallet
4 mm 23
5 mm 16
SCUDOGARDEN PPThickness Rolls per pallet
3 mm 28
4 mm 23
SCUDOGARDEN PP
SCUDOGARDEN PP is an APP (atactic polypropy-lene) polymer bitumen modified membrane.The compound is formulated with PREVENTOL,a special chemical substance giving the productanti-root properties.The product is reinforced with a spunbond non-woven polyester having a high puncture resistance.Use: on any underground structures subjected toperforation by roots, such as roof gardens, founda-tions, containing walls, tunnels, etc.
ANTI-ROOT
SCUDOBASE
SCUDOBASE is a waterproofing membrane con-sisting of a spunbond non-woven polyester coatedon the upper face with a polymer bitumen modi-fied compound.Use: mechanically fixed by nailing on plywood/tim-ber decks as an underlayer to allow torching ofwaterproofing membranes.It can be used also as a separating layer on roofswith heavy protection (gravel ballast, paving, soil)or to smoothen rough application substrates.
SCUDOBASEWeight Rolls per pallet
1,2 kg/m2 25 (20 m long)
For the mineral (SLATED) coloured version white, red, green and brown, etc, the company does not guarantee the permanence in time of the colour.
All the rolls are 10 m long, unless differently specified.
CONCESSIONI E COSTRUZIONI AUTOSTRADE S.p.A.
-10 °C
-10 °C -10 °C -10 °C
SCUDOVAPOR
SCUDOVAPOR is an APP (atactic polypropylene)polymer bitumen modified membrane.It is available with the following reinforcements:• aluminium foil only (2 kg/m2 type)• aluminium foil and glass fibre (other types).The 3 mm - 4 mm versions are available in SBScompound on request.Use: as a water vapour barrier in roofing systemswith thermal insulation.
VAPOUR
SCUDOVAPORThickness/Weight Rolls per pallet
2 kg/m2 28 (15 m long)
3 mm 28
4 mm 23
SCUDOFOND
HDPE High density polyetilene membrane withrusticated surface, weight abt. 500 g/m2.
Use: drainge of foundations and undergroundworks, and containing walls.
SCUDOFONDLenght Rolls Rolls per pallet
2 x 20 m 12
1,5 x 20 m 12
PERFOPLASTPERFOPLAST is a perforated glass fibre matimpregnated with a polymer bitumen modifiedcompound.
Use: as an intermediate layer to carry out partiallybonded systems or as a venting sheet.
VAPOUR
PERFOPLASTWeight Rolls per pallet
0,8 kg/m2 25 (30 m long)
11
SCUDOCENE M25/MINERALSCUDOCENE M25 is a waterproof membranemade of distilled bitumen and elastomeric poly-olefines (POE). The products is reinforced withspunbond stabilized composite polyester. TheMineral version has the upper surface coated withslate chips.The product has an optimal dimension-al stability and can be used in the most rigidweather conditions.Use: on civil and industrialdecks, foundations, parkings etc.These membraneshave obtained an I.T.C. Technical Agrèment n°616/03 of 02/12/2003.
SCUDOCENE L20/MINERALSCUDOCENE L20 is a waterproof membranemade of distilled bitumen and elastomeric poly-olefines (POE). The products is reinforced withspunbond stabilized composite polyester. TheMineral version has the upper surface coated withslate chips.The product has an optimal dimension-al stability and can be used in the most rigidweather conditions. Use: on civil and industrialdecks, foundations, parkings etc. We suggest theMineral for underslate works.
RADONSTOPRADONSTOP is a waterproof membrane madeof distilled bitumen modified with SBS resins. It isreinforced with glassfibre and aluminium sheet.The absolute Radon barrier characteristics havebeen assessed by the CSI Institute with certificaten° 26/LCF/MAT/00. Use: it can be used both invertical and horizontal in contact with the ground(undertile in floors and verticals in foundations).
RADONSTOP PRADONSTOP P is a waterproof membranemade of distilled bitumen modified with elasto-plastomeric resins. It is reinforced with spunbondnon woven polyester . The good Radon barriercharacteristics have been assessed by the CSIInstitute with certificate n° 151/LCF/MAT/00. Use:it can be used both vertical and horizontal in con-tact with the ground (undertile in floors and verti-cals in foundations).
SCUDOCENE M25Thickness Length Rolls per pallet
4 mm 10 m 25
SCUDOCENE M25 MINERALThickness Length Rolls per pallet
4 mm (on selvedge) 7,5 m 23
SCUDOCENE L20Thickness Rolls per pallet
3 mm 28
4 mm 23
SCUDOCENE L20 MINERALWeight Rolls per pallet
4 kg/m2 23
4,5 kg/m2 20
RADONSTOPThickness Rolls per pallet
4 mm 20
RADONSTOP PThickness Rolls per pallet
4 mm 23
-25 °C -15 °C
-20 °C -10 °C
FIX POINT ALU / VFIX POINT ALU/V is a waterproof membranemade of distilled bitumen modified with elasto-plastomeric resins. FIX POINT ALU is reinforcedwith glassfibre and aluminium sheet and it is useda vapour barrier. FIX POINT V is reinforced withglassfibre and it is used as vapour control layer.The upper face presents knobs made of specialcompound that enable, through torching, theadhesion of insulation panels (polystirene(expanded and extruded), polyurethane).
VAPOUR
DIFO POINT ALU / VDIFO POINT ALU/V is a waterproof membranemade of distilled bitumen modified with elasto-plastomeric resins. DIFO POINT ALU is rein-forced with glassfibre and aluminium sheet and isused a vapour barrier. DIFO POINT V is rein-forced with glassfibre and is used as vapour con-trol layer. The lower face presents knobs made ofspecial compound that enable, through torching, agood adhesion to the deck and the vapour diffu-sion.
VAPOUR
FIX POINT ALU / VWeight Rolls per pallet
3 kg/sqm2 * 23
4 kg/sqm2 16
* Only for FIX POINT ALU
DIFO POINT ALU / VWeight Rolls per pallet
4 kg/m2 16
-10 °C
-10 °C
12
RAME 45Weight Rolls per pallet
4,5 kg/m2 24
ALLUMINIO 30Weight Rolls per pallet
3,5 kg/m2 28
LAMINATED
METAL
RAME 45ALLUMINIO 30 / 40 - 40 COLOR
RAME 40/ERAME 45. Waterproofing membrane reinforcedwith glass fibre and surfaced with an 8/100 mmthick embossed copper foil.
ALLUMINIO 30 / 40. Waterproofing membranesreinforced with glass fibre and surfaced with an8/100 mm thick embossed aluminium foil.
ALLUMINIO 40 COLOR. As above, but facedwith coloured (red, green) aluminium foil.
ALLUMINIO 30/E - 40/E. Waterproof membranereinforced with glass fibre and surfaced with an8/100 mm thick aluminium foil.
Use: as a finishing layer on roofs where a specialaesthetical effect is required (residential, religiousbuildings, etc.).Aluminium facing is suitable to achieve goodreflection of the UV rays in case of very hot cli-mates.The products can be used also in detail worksalternatively to traditional sheet metal materials.
TAGLIAMURORoll height cm Linear metres per roll
14-20-25-28-33-40-50 10
SEAL STRIPS
Seal strips obtained cutting APP polymer bitumenmodified membranes at different heights.They arereinforced with non-woven polyester (types TNT)or glass fibre (types V).
The product range consists of:
• TNT 3 : 3 kg/m2
• TNT 4 : 4 kg/m2
• V 3 : 3 kg/m2.
Use: protection and waterproofing of continuousfoundations.
BITUMINISED PAPERFELTS
BISABBIATOBituminised paperfelt obtained saturating the rein-forcement with oxidised bitumen. Both faces aresanded.
CILINDRATOBituminised paperfelt obtained saturating the rein-forcement with distilled bitumen.
Use: as a separating layer between waterproofingand heavy protection (gravel ballast, paving, etc.)or on foam insulation materials, in case of partiallybonded membranes.The products can be used also as an underlayerfor flooring of basements and generally damprooms.
VAPOUR
BISABBIATOWeight Rolls per pallet
1,2 kg/m2 30 (20 m long)
CILINDRATOWeight Rolls per pallet
0,3 kg/m2 85 (20 m long)
0,5 kg/m2 68 (20 m long)
0,7 kg/m2 52 (20 m long)
1 kg/m2 42 (20 m long)
All the rolls are 10 m long, unless differently specified.
RAME 40/EWeight Rolls per pallet
4 kg/m2 25
ALLUMINIO 40/EWeight Rolls per pallet
4 kg/m2 25
ALLUMINIO 30/EWeight Rolls per pallet
3 kg/m2 30
ALLUMINIO 40ALLUMINIO 40 COLOR
Weight Rolls per pallet
4,2 kg/m2 24
13
VERFIXPackaging Weight
Bucket 10 - 20 kg
SCUDOFLEXPackaging Weight
Bucket 5 - 10 - 20 kg
COLOURbrick red green cement grey white
COLOURbrick red
COLOURbrick red green cement grey white
COLOURbrick red green cement grey white
SCUDOCOLORPackaging Weight
Bucket 5 - 10 - 20 kg
ELASTOCOVERPackaging Weight
Bucket 10 - 20 kg
ELASTOCOVERELASTOCOVER: Waterproof encapsulating coat-ing, based on elastomer ic resins in a water-based emulsion. Suitable as a coating whenencapsulating asbestos-cement components.Can be stretched by over 500% and is still flexibleat -20 °C. Highly resistant to UV rays, acid rainand industrial atmospheric pollution.
COLOUR
brick red green cement grey white
VERFIXVERFIX: Adhesive primer containing modifiedresing an water-based emulsion.
APPLICATION METHOD
SCUDOFLEXSCUDOFLEX: Waterproof liquid membranemade of elastomeric resins dispersed in water.After drying, the applied product forms a layerperfectly adhering to the components and offersexcellent resistance to UV rays and acid rain.
SCUDOCOLORSCUDOCOLOR: Waterproof paint based onelastomeric resins in an water-based emulsionpresents excellent resistance to UV rays, acid rainand industrial pollution.Excellent adhesion to any support (except slakedlime or gypsum).
PRODUCTS FOR ENCAPSULATION ORRECOVERY OF ASBESTOS CEMENT SHEETS
LIQUID MEMBRANES FOR WATERPROOFING
LIQUID PRODUCTS
14
AIR VENTSAir vents used to release the water vapour pres-sure built up under the waterproof covering.
AERATOREDiameter mm Height mm
75 240
VERPRIMBitumen, fast drying solvent based primer, used toprepare the application surface improving theadhesion of polymer bitumen membranes.The product is available on request also in 200litre drums suitable for use on bridge decks,viaducts and any road engineering work.
VERPRIMPackaging Litres per tin
Tins 5 - 10 - 20
BASEBITWater bituminous emulsion used for waterproof-ing of roofs and vertical foundations.
BASEBITPackaging Litres per tin
Tins 4 - 10 - 17
SCUDOALLAluminium based paint used for protection ofpolymer bitumen modified membrane roofings.
SCUDOALLPackaging Litres per tin
Tins 5 - 10 - 20
BITOX85/25 oxidised bitumen in 25÷30 kg bags orblocks, used for hot applications.
DRAINING OUTLETSStandardAnti-gushing Dutral draining outlet with outletwith standard tail.
LongAnti-gushing Dutral draining outlet with long tail.
SuperAnti-gushing Dutral draining outlet with very longtail for special applications.
EPDM typeAnti-gushing EPDM draining outlet for use with-out extensions.
STANDARDDiameter mm Height mm
80 - 100 - 125 170
LONGDiameter mm Height mm
80 - 100 - 125 240
SUPERDiameter mm Height mm
140 - 150 - 160 - 200 600
EPDMDiameter mm Height mm
150 - 200 180
LEAF-GRATEUniversal type, for drain outlets with diameter of75 ÷ 125 mm.
ROOFING TORCHESCOMPLETE PIEZOELECTRIC TORCHINGEQUIPMENTPropane gas blow torch for membrane installa-tion. Piezoelectric ignition, furnished with valve and10 m hose.STANDARD TORCHING EQUIPMENTPropane gas blow torch for membrane installa-tion. Normal ignition, furnished with valve and 10m hose.BLOW TORCHPropane gas blow torch for membrane installa-tion. For standard equipment.VALVE with 10 m hose.
LAYERTEX - LAYERGLASSLAYERTEXNon-impregnated non-woven polyester mat.LAYERGLASSNon-impregnated glass fibre mat.Use: as a separation or filter layer.
LAYERTEXRoll size Weight
3 x 70 m 300 g/m2
3 x 100 m 200 g/m2
LAYERGLASSRoll size Weight
1 x 100 m 40 g/m2
RECUPERBITBituminous conglomerate for cold application inroad repairs.
Packing: 30 Kg plastic bags.
15
SCUDOTHERM PST
Thermal insulation rolls consisting of strips of fire-retardant extruded polystyrene with 35 kg/m3
density, laminated to a polymer bitumen modifiedmembrane reinforced with glass fibre or non-woven polyester.The underslating versions have a polyester rein-forced laminated membrane surfaced with slatechips.
Because of its very high resistance to compressionScudotherm PST can be applied also on roofswith concrete paving slabs on plastic corner sup-ports.
It can be fixed mechanically, or slightly torching theunderlying vapour barrier in case of gravel ballast-ing or heavy protection.
Characteristics:
• excellent resistance to compression
• very high thermal insulation
• fire-retardant
• very low water absorption
SCUDOTHERM PSE/L20 AE
Thermal insulation rolls consisting of strips of fire-retardant expanded polystyrene with 20 kg/m3
density, laminated to a polymer bitumen modifiedmembrane reinforced with glass fibre or non-woven polyester.The underslating versions have apolyester reinforced laminated membrane sur-faced with slate chips.
Scudotherm PSE/L20 AE can be fixed mechanical-ly, or with suitable cold adhesives, or slightly torch-ing the underlying vapour barrier in case of gravelballasting or heavy protection (paving, concretecast, etc.).
Characteristics:
• light and easy to handle and apply on site
• good thermal insulation
• fire-retardant
• low water absorption
SCUDOTHERM PSE/H25 AE
Thermal insulation rolls consisting of strips of fire-retardant expanded polystyrene with 25 kg/m3
density, laminated to a polymer bitumen modifiedmembrane reinforced with glass fibre or non-woven polyester.The underslating versions have apolyester reinforced laminated membrane sur-faced with slate chips.
Scudotherm PSE/H25 AE can be fixed mechani-cally, or with suitable cold adhesives, or slightlytorching the underlying vapour barrier in case ofgravel ballasting or heavy protection (paving, con-crete cast, etc.).
Characteristics:
• light and easy to handle and install on site
• good thermal insulation
• fire-retardant
• low water absorption
Laminated Thicknessmembrane Weight
Glass fibre reinforced 2 - 3 - 4 mm
Polyester reinforced 3 - 4 mm
Mineral faced polyester3,5 - 4,5 kg/m2
reinforced (Underslating)
Insulation Roll Thermal resistance R (m2 K/W)thickness size PST PSE/H25 AE PSE/L20 AE
20 mm 1 x 10 m 0,66 0,51 0,49
30 mm 1 x 7,5 m 0,97 0,76 0,74
40 mm 1 x 6 m 1,30 1,01 0,98
50 mm 1 x 5 m 1,62 1,26 1,23
60 mm 1 x 4 m - 1,52 1,47
The thermal resistance values mentioned in the table are usable for practical calculation as they were obtained considering the increasing coefficient for the different materials and the insulation loss due to cutting of the strips.
SCUDOTHERM PU/VV
Thermal insulation rolls consisting of strips of fire-retardant expanded polyurethane with 35 kg/m3
density, finished on both faces with a polythenetreated glass fibre mat, laminated to a polymerbitumen modified membrane reinforced with glassfibre or non-woven polyester. The underslatingversions have a polyester reinforced laminatedmembrane surfaced with slate.
Scudotherm PU/VV can be fixed with hot oxi-dised bitumen at a rate of 1.5 kg/m2, or mechani-cally (with a minimum of 5 nails per m2), or slightlytorching the underlying vapour barrier in case ofgravel ballasting or heavy protection (paving, con-crete casts, etc.).
Characteristics:
• very high thermal insulation
• good resistance to compression
• fire-retardant
SCUDOTHERM PU/CL
Thermal insulation rolls consisting of strips of fire-retardant expanded polyurethane with 35 kg/m3
density, finished on both faces with a bitumencoated paperfelt, laminated to a polymer bitumenmodified membrane reinforced with glass fibre ornon-woven polyester.
The underslating versions have a polyester rein-forced laminated membrane surfaced with slate.
Scudotherm PU/CL can be fixed with hot oxi-dised bitumen at a rate of 1.5 kg/m2, or mechani-cally (with a minimum of 5 nails per m2), or slightlytorching the underlying vapour barrier in case ofgravel ballasting or heavy protection (paving, con-crete casts, etc.).
Characteristics:
• excellent thermal insulation
• good resistance to compression
• fire-retardant
16
Laminated Thicknessmembrane Weight
Glass fibre reinforced 2 - 3 - 4 mm
Polyester reinforced 3 - 4 mm
Mineral faced polyester 3,5 - 4,5 kg/m2
reinforced (Underslating)
Insulation Roll Thermal resistance R (m2 K/W)thickness size PU / VV PU / CL
20 mm 1 x 10 m 0,64 0,62
30 mm 1 x 7,5 m 0,96 0,92
40 mm 1 x 6 m 1,28 1,21
50 mm 1 x 5 m 1,60 1,60
60 mm 1 x 4 m 1,92 1,92
The thermal resistance values mentioned in the table are usable for practical calculation as they wereobtained considering the increasing coefficient for the different materials and the insulation loss due tocutting of the strips.
17
Laminated Thicknessmembrane Weight
Glass fibre reinforced 2 - 3 - 4 mm
Polyester reinforced 3 - 4 mm
Mineral faced polyester 3,5 - 4,5 kg/m2
reinforced (Underslating)
SCUDOTHERM LR/L100
Thermal insulation rolls consisting of strips of ver-tically positioned fibre rock wool with 100 kg/m3
density, laminated to a polymer bitumen modifiedmembrane reinforced with glass fibre or non-woven polyester.
The underslating versions have a polyester rein-forced laminated membrane surfaced with slatechips.
Density and thickness being equal, vertically posi-tioned fibres offer a higher resistance to compres-sion than horizontally oriented.Scudotherm LR/L100 can be fixed with hot oxi-dised bitumen at a rate of 1.5 kg/m2 or mechani-cally fixed.
Characteristics:
• dimensionally stable and unaffected by changesin temperature and humidity
• absolutely non-combustible
• good acoustic insulation
• adaptable to any roofing deck
SCUDOTHERM LR/H150
Thermal insulation rolls consisting of strips of ver-tically positioned fibre rock wool with 150 kg/m3
density, laminated to a polymer bitumen modifiedmembrane reinforced with glass fibre or non-woven polyester.
The underslating versions have a polyester rein-forced laminated membrane surfaced with slatechips.
Density and thickness being equal, vertically posi-tioned fibres offer a higher resistance to compres-sion than horizontally oriented.
Scudotherm LR/H150 can be fixed with hot oxi-dised bitumen at a rate of 1.5 kg/m2 or mechani-cally fixed.
Characteristics:
• dimensionally stable and unaffected by changesin temperature and humidity
• absolutely non-combustible
• good acoustic insulation
• adaptable to any roofing deck
The thermal resistance values mentioned in the table are usable for practical calculation as they wereobtained considering the increasing coefficient for the different materials and the insulation loss due tocutting of the strips.
Insulation Roll Thermal resistance R (m2 K/W)thickness size LR / H150 LR / L100
25 mm 1 x 10 m 0,52 0,54
30 mm 1 x 7,5 m 0,62 0,65
40 mm 1 x 6 m 0,83 0,87
50 mm 1 x 5 m 1,03 1,08
60 mm 1 x 4 m 1,24 1,30
70 mm 1 x 3 m 1,45 1,52
80 mm 1 x 2 m 1,65 1,73
18
SCUDOTHERM BOARDLR/H150
Thermal insulation boards consisting of rock woolwith 150 kg/m3 density, laminated to a polymerbitumen modified membrane reinforced with glassfibre. A side selvedge is needed for the sealing ofthe joints.
The underslating version with a mineral facedpolyester reinforced laminated membrane is avail-able on request.
Scudotherm Board LR/H150 can be fixed withhot oxidised bitumen at a rate of 1.5 kg/m2 ormechanically fixed.
Characteristics:
• dimensionally stable and unaffected by changesin temperature and humidity
• absolutely non-combustible
• good acoustic insulation
• adaptable to any application surface
Insulation Board Thermal resistance R (m2 K/W)thickness size LR/H150 PSE/H25 AE PSE/L20 AE
20 mm - 0,51 0,49
30 mm 1 x 1,20 mm - 0,76 0,74
40 mm (LR/H150) - 1,01 0,89
50 mm 1,23 1,26 1,23
60 mm 1 x 2 mm - 1,52 1,47
70 mm (PSE/H25 AE) - 1,77 1,72
80 mm (PSE/L20 AE) - 2,02 1,97
SCUDOTHERM BOARDPSE/H25 AE - L20 AE
Thermal insulation boards consisting of fire-retar-dant expanded polystyrene with 25 kg/m3 (typeH25 AE) or 20 kg/m3 (type L20 AE) density, lami-nated to a polymer bitumen modified membranereinforced with glass fibre and having twoselvedges.
The underslating version with a mineral facedpolyester reinforced laminated membrane is avail-able on request.
Scudotherm Board PSE can be fixed mechanically,with suitable cold adhesives, or slightly torchingthe underlying vapour barrier in case of gravel bal-lasting or heavy protection (paving, cast concrete,etc.).
Characteristics:
• light and easy to handle and apply on site
• good thermal insulation
• fire-retardant
• low water absorption
The thermal resistance values mentioned in the table are usable for practical calculation as they wereobtained considering the increasing coefficient for the different materials and the insulation loss due tocutting of the strips.
Laminated ThicknessmembraneGlass fibre reinforced 2 mm
19
SCUDOTHERM ONDA
Thermal insulation system consisting of a wave profile expanded polystyreneboard with different density (18 - 20 -25 kg/m3), laminated to a polymer bitu-men modified membrane reinforced with glass fibre or non-woven polyesterhaving two selvedges.
The system is fixed mechanically to the roof deck by expansion bolts havinglarge diameter washer.
The system is used for the refurbishment of asbestos cement corrugateddecks, together with a cap sheet consisting of a mineral surfaced polymerbitumen membrane, fully bonded on the laminated membrane.
Characteristics:
• eliminates the costs of removal of the old roofing materials;
• eliminates the costs of removal and transport of the rubble to dump
• eliminates the costs of disposal in the dump
• creates a good thermal insulation
• allows a good waterproofing
• greatly reduces refurbishment times
• allows to continue the activities within the building
SCUDOTHERM GRECA
Thermal insulation system consisting of a standing seam profile expandedpolystyrene board with different density (18 - 20 - 25 kg/m3), laminated to apolymer bitumen modified membrane reinforced with glass fibre or non-woven polyester having two selvedges.
The system is fixed mechanically to the roof deck by self-tapping screws hav-ing large diameter washer.
The system is used for the refurbishment of galvanised steel roof decks,together with a cap sheet consisting of a mineral surfaced polymer bitumenmembrane, fully bonded on the laminated membrane.
Characteristics:
• eliminates the costs of removal of the old roofing materials;
• eliminates the costs of removal and transport of the rubble to dump
• eliminates the costs of disposal in the dump
• creates a good thermal insulation
• allows a good waterproofing
• greatly reduces refurbishment times
• allows to continue the activities within the building
LaminatedThicknessmembrane
Glass fibre reinforced 2 mm
Polyester reinforced 2 mm
Wave profile N°of waves Pitch Wave height Board sizeA1 7 146 mm 48 mm 1020x1000 mm
A2 6 152 mm 52 mm 910x1000 mm
A3 6 177 mm 51 mm 1060x1000 mm
A4 5 177 mm 51 mm 880x1000 mm
Average insulation Scudotherm Thermal resistance R (m2 K/W)thickness ONDA 18 kg/m3 20 kg/m3 25 kg/m3
55 mm A1-A2-A3-A4 1,32 1,39 1,43
Average insulation Scudotherm Thermal resistance R (m2 K/W)insulation GRECA 18 kg/m3 20 kg/m3 25 kg/m3
thickness Board size
60 mm 1,515 1,562 1,613
65 mm 1,666 1,724 1,754
70 mm 1,818 1,852 1,923
75 mm 1,960 2,00 2,041
Varies with the roof deck
profile
The thermal resistance values mentioned in the table are usable for practical calculation as they were obtained considering the increasing coefficient for thedifferent materials and the insulation loss due to cutting of the strips.
20
Coldflexibility
Softeningpoint
(Ring & ball)
Heat resistance
Long. Transv. Long. Transv.N/5 cm N/5 cm
Product
Tensile strength Elongation
UNI EN 12311-1EN-1110UNI EN 1427UNI EN 1109
* R
efer
red
to th
ickn
ess
4 m
m.
Density
Averageresistance tocompression
(at 10%deformation)*
Water vapourpermeability
(µ factor)
Increasingcoefficient
Thermal conductivityat 20 °C
Kcal/hm °C W/mK
SCUDOTHERM PST
SCUDOTHERM PSE/H25 AE
SCUDOTHERM PSE/L20 AE
SCUDOTHERM PU/VV
SCUDOTHERM PU/CL
SCUDOTHERM LR/H150
SCUDOTHERM LR/L100
35 kg/m3
25 kg/m3
20 kg/m3
35 kg/m3
35 kg/m3
150 kg/m3
100 kg/m3
4 kg/cm2
1,4 kg/cm2
1 kg/cm2
1,8 kg/cm2
1,8 kg/cm2
0,6 kg/cm2
0,4 kg/cm2
200
40 ÷ 70
30 ÷ 50
100
100
1
1
10%
10%
10%
30%
30%
10%
10%
0,024
0,031
0,032
0,021
0,021
0,038
0,036
0,028
0,036
0,037
0,024
0,024
0,044
0,042
NOTE: values are referred to our corrent production. Tolerances are according to UNI-EN norms and, for loads and elongations, according to UEAtc norms ofDecember 2001. Values can be changed without prior notice.
SCUDOELAST P4 -25 °C ≥ 115 °C ≥ 100 °C 900 700 50% 50%
SCUDOELAST FCTR 180 -25 °C ≥ 115 °C ≥ 100 °C 870 680 50% 50%
SCUDOELAST V -25 °C ≥ 115 °C ≥ 100 °C 300 200 2% 2%
GAMMAELAST FCTR 160 -20 °C ≥ 115 °C ≥ 100 °C 830 600 45% 50%
GAMMAELAST V -20 °C ≥ 115 °C ≥ 100 °C 300 200 2% 2%
DELTAELAST TNT -20 °C ≥ 110 °C ≥ 95 °C 750 450 40% 45%
ECOELAST TNT -20 °C ≥ 110 °C ≥ 95 °C 600 400 40% 40%
ECOELAST V -20 °C ≥ 110 °C ≥ 95 °C 300 200 2% 2%
SCUDOTENE -20 °C ≥ 110 °C ≥ 90 °C 780 550 45% 50%
SCUDOCENE M25 -25 °C ≥ 150 °C ≥ 140 °C 850 650 45% 45%
SCUDOCENE L20 -20 °C ≥ 150 °C ≥ 140 °C 550 400 40% 45%
RADONSTOP -15 °C ≥ 110 °C ≥ 95°C 500 400 3% 3%
RADONSTOP P -10 °C ≥ 150 °C ≥ 120 °C 850 600 50% 50%
SCUDOPLAST CAR -10 °C ≥ 150 °C ≥ 120 °C 1250 1100 45% 50%
SCUDOGARDEN PP -10 °C ≥ 150 °C ≥ 120 °C 850 600 45% 50%
SCUDOBASE -10 °C ≥ 150 °C ≥ 120 °C 800 370 30% 50%
SCUDOVAPOR (3 mm e 4 mm) -10 °C ≥ 150 °C ≥ 120 °C 550 450 3% 3%
SCUTUMPLAST FCTR 180 -15 °C ≥ 150 °C ≥ 120 °C 950 700 50% 50%
SCUTUMPLAST P -15 °C ≥ 150 °C ≥ 120 °C 850 650 45% 45%
SCUTUMPLAST BIARMATO -15 °C ≥ 150 °C ≥ 120 °C 850 600 60% 60%
SCUDOPLAST FCTR 250 -15 °C ≥ 150 °C ≥ 120 °C 1200 1000 50% 50%
SCUDOPLAST FCTR 180 -15 °C ≥ 150 °C ≥ 120 °C 900 680 50% 50%
SCUDOPLAST FCTR 160 -15 °C ≥ 150 °C ≥ 120 °C 880 660 50% 50%
SCUDOPLAST TNT -15 °C ≥ 150 °C ≥ 120 °C 880 560 40% 45%
SCUDOPLAST V -15 °C ≥ 150 °C ≥ 120 °C 450 250 2% 2%
SCUDOPLAST 2 -15 °C ≥ 150 °C ≥ 120 °C 580 500 40% 45%
GAMMAGUM FC 160 -10 °C ≥ 150 °C ≥ 120 °C 850 600 45% 50%
GAMMAPLAST TNT -10 °C ≥ 150 °C ≥ 120 °C 850 550 40% 45%
GAMMAPLAST V -10 °C ≥ 150 °C ≥ 120 °C 450 250 2% 2%
DELTAGUM FC -10 °C ≥ 150 °C ≥ 120 °C 830 530 40% 45%
DELTAPLAST TNT -10 °C ≥ 145 °C ≥ 115 °C 800 500 40% 45%
SIGMAPLAST FC -10 °C ≥ 145 °C ≥ 115 °C 750 500 40% 45%
SIGMAPLAST V -10 °C ≥ 145 °C ≥ 115 °C 450 250 2% 2%
ECOPLAST TNT -5 °C ≥ 145 °C ≥ 110 °C 700 450 35% 45%
ECOPLAST V -5 °C ≥ 145 °C ≥ 110 °C 450 250 2% 2%
TROPICAL TNT -5 °C ≥ 145 °C ≥ 110 °C 600 400 35% 45%
TROPICAL V -5 °C ≥ 145 °C ≥ 110 °C 450 250 2% 2%
OMEGA TNT 0 °C ≥ 140 °C ≥ 110 °C 500 350 35% 45%
OMEGA V 0 °C ≥ 140 °C ≥ 110 °C 450 250 2% 2%
UNI 10351/94
Product
21
Bi tuminous Sh ing le s
Ceramic Slate granules
Self adhesive tabs
Distilled bitumen modifiedwith atactic polypropylene (APP)
Double reinforcement non-woven polyesterand glass fibre, or single reinforcement with
high weight glass fibre (125 g/m2)
Distilled bitumen modified withatactic polypropylene (APP)
Anti-adherent sand
INNOVATIONTegola Italiana Roofing Shingles are the firstshingles in the World manufactured using adouble reinforcement non-woven polyesterplus glass fibre and APP modified bitumen,therefore far superior to competing typesoffering single layer glass reinforcement onlyand manufactured with oxidised bitumen.
WIDE RANGE OF STYLESaaaaaaaaaaaaaaaaaaaaaaaaaaa1000
115135
330
140
140
242
50
1000aaaaaaaaaaaaaaaaaaaaaaaaaaa500
330
1000
500100
330
140
110
190
aaaaaaaaaaaaaaaaaaaaaaaaaaa80
1000
155175
320
140
140
40
1000
175160
330
140
140
325
aaaaaaaaaaaaaaaaaaaaaaaaaaa50
1000
500165 165
320
140
140
40
CLASSIC
CASTOR
MAJOR
ELEGANCE
GEMMA ONDA
22
WIDE RANGE OF COLOURS
Because of the printingprocess the colours must beconsidered only an indication.
BITUMEN BASED MASTIC
PUNTO APP BITUMINOUS MEMBRANEReinforced with non-woven polyester andsurfaced with ceramic state granules incolour that is manufactured to match withshingles.
AIR VENTS
PLYWOOD
NAILING MACHINE
VENTILATED RIDGE
PREFABRICATED RIDGESHINGLE
SNOW BREAKER
INSECT BARRIER
Disclaimer / Note:Italiana Membrane reserves the right to modify the technical data in this catalogue which is based on current pro-duction without prior warning. All indications in this catalogue are based upon our experience and current workingpractices. No representation or warranty is made by Italiana Membrane as to the suitability or fitness of the goodsfor any particular purpose. The buyer shall satisfy himself and shall therefore be totally responsible in this respect.
Weight percovered sqm
Kg
10.5
11
10.5
16
9
9
Single sizecm
100 x 33
100 x 33
100 x 33
100 x 33
100 x 32
100 x 32
sqmper pack
2.52
2.52
2.52
1.5
2.52
2.52
Singlesper pack
18
18
18
12
18
18
Packsper pallet
45
45
45
45
45
45
sqmper pallet
113.4
113.4
113.4
67.5
113.4
113.4
CASTOR
GEMMA
MAJOR
ELEGANCE
ONDA
CLASSIC
PINEWOOD BATTENS
F48 Light brownD48 Slate E48 Cathedral grey
I48 Dark greenG48 Brown H48 Light green
Q48 Dark brownM48 Light grey P48 Brindle red
U48 Dark blue N48 Light blue
ANCILLARY PRODUCTS
WIDE RANGE OF FIXING NAILS, EXPANSION BOLTS,SELF-TAPPING SCREW
C48 BlackB48 Dark redA48 Red T 100
23
ITALIANA MEMBRANE S.p.A.Via Galoppat 134 - 33087 PASIANO (PN)
Tel. +39 0434.614611 - Fax +39 0434.628178Internet: www.itmembrane.it - E-mail: [email protected]
PROFESSIONAL WATERPROOFING
R
ISO 9001
Q
uality Sy ste
m
Com
pa
nyC
ert
ifie
d
Rev
.01/
04 w
ww
.eu
rop
rin
t.it
- 0
6.04
Top Related