MODEL: SE 303

WATER FLOW MEASUREMENT AND

CALIBRATION SYSTEM

SOLTEQ®Equipment for Engineering Education & Re-

THE Water Flow Measurement and Calibration System (Model: SE 303) has been designed for students

demonstration on various types of flow measurement devices as well as to give the students a hands-on

experience on the configuration and calibration of water flow transmitter. The equipment consists of industrialgrade instrumentation to exhibit a realistic working environment of a true flow measurement using various types of

measuring instruments.

The equipment is self-contained constructed on an

epoxy coated mild steel checker plate platform with

frame and four lockable castor wheels. The pump,

tanks, instrumentation and valves are strategically

located for easy access. For safety reasons, the control

panel is protected against water splashes. The process

pipings are made of stainless steel.

All electrical wirings are laid in flexible PVC conduit and

instrument cables are screened. Individual starters to

the pumps are provided. Power cable for the pump is

laid in separate conduit from instrument cables.

Identification tags are provided for every major item

found in the equipment. A mimic diagram is also included

showing the Process and Instrumentation Diagram.

Equipment for Engineering Education & ResearchSOLTEQ®

SOLTEQ

EXPERIMENTAL CAPABILITIES

♦ Flow rate measurement using DP transmitter across

an orifice

♦ Flow rate measurement using an electromagnetic

flow meter

♦ Flow rate measurement using a variable area flow

meter

♦ Flow rate measurement methods comparison

♦ Configurations and parameters study of flow

transmitter

♦ Calibration of various flow transmitters

♦ ISO 9000 Standard Calibration Procedure

SPECIFICATIONS

a) Output Receiver/Recorder

Type : Continuous pen

No of pen : 2

Chart : Z-fold

Chart speed : 3600 m/hr, Stepped

b) Differential Pressure Transmitters

Type : NPT female

Size : ½”

Range : 2 to 100 kPa

Output : 4 to 20mA

Electrical connections : 2

c) Hand Valve:

Type : Ball/globe

Material : Brass/Stainless Steel

d) Sump Tank:

Capacity : 120-L

Material : stainless steel

e) Calibration Tank:

Capacity : 60-L

Material :stainless steel

f) Orifice Flow Element:

Type : Primary flow device

Range : 0 to 20 LPM

g) Magnetic Flow meter

Flowmeter : Highly accurate low measurement

device using the magnetic laws

Range : 0 to 20 LPM

Output : 4 to 20 mA

Communication : HART communication

h) Variable Area Flow meter:

Principle : Variable area

Range : 0 to 20 LPM

REQUIREMENTS

Electrical : 230VAC/1-phase/50Hz/13Amp

Water supply : Laboratory tap water

OVERALL DIMENSIONS

Height : 2.00 m

Width : 1.22 m

Depth : 0.61 m

MANUAL

The unit comes with Operating and Experimental

manuals in English.

TRAINING

Training shall be provided upon handing over of the

unit.

Our range of teaching equipment can be complemented with our

SOLDAS and SOLCAL software.

SOFTWARE & E - LEARNING

SOLDAS - Supervisory Control & Data Acquisition

- Data Logging

- Signal Analysis

- Process Control

- Real-Time Display

- Tabulated Results

- Graph of Experimental Results

SOLCAL - Computer Aided Learning

- Multimedia Features

- Interactive

- Graphic Simulation

- Experiment Result Samples

- Full Experiment Manuals

SOLTEQ®

Contact us for a catalog CD

SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)

Sales Office :

No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784

R&D Office :

G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023

Email : solution@solution.com.myWeb site : http//www.solution.com.my/

AGENT:

Equipment for Engineering Education & Research

BUATAN MALAYSIA

MSC- StatusCompany

®

®