MODEL: SE 303
WATER FLOW MEASUREMENT AND
CALIBRATION SYSTEM
SOLTEQ®Equipment for Engineering Education & Re-
THE Water Flow Measurement and Calibration System (Model: SE 303) has been designed for students
demonstration on various types of flow measurement devices as well as to give the students a hands-on
experience on the configuration and calibration of water flow transmitter. The equipment consists of industrialgrade instrumentation to exhibit a realistic working environment of a true flow measurement using various types of
measuring instruments.
The equipment is self-contained constructed on an
epoxy coated mild steel checker plate platform with
frame and four lockable castor wheels. The pump,
tanks, instrumentation and valves are strategically
located for easy access. For safety reasons, the control
panel is protected against water splashes. The process
pipings are made of stainless steel.
All electrical wirings are laid in flexible PVC conduit and
instrument cables are screened. Individual starters to
the pumps are provided. Power cable for the pump is
laid in separate conduit from instrument cables.
Identification tags are provided for every major item
found in the equipment. A mimic diagram is also included
showing the Process and Instrumentation Diagram.
Equipment for Engineering Education & ResearchSOLTEQ®
SOLTEQ
EXPERIMENTAL CAPABILITIES
♦ Flow rate measurement using DP transmitter across
an orifice
♦ Flow rate measurement using an electromagnetic
flow meter
♦ Flow rate measurement using a variable area flow
meter
♦ Flow rate measurement methods comparison
♦ Configurations and parameters study of flow
transmitter
♦ Calibration of various flow transmitters
♦ ISO 9000 Standard Calibration Procedure
SPECIFICATIONS
a) Output Receiver/Recorder
Type : Continuous pen
No of pen : 2
Chart : Z-fold
Chart speed : 3600 m/hr, Stepped
b) Differential Pressure Transmitters
Type : NPT female
Size : ½”
Range : 2 to 100 kPa
Output : 4 to 20mA
Electrical connections : 2
c) Hand Valve:
Type : Ball/globe
Material : Brass/Stainless Steel
d) Sump Tank:
Capacity : 120-L
Material : stainless steel
e) Calibration Tank:
Capacity : 60-L
Material :stainless steel
f) Orifice Flow Element:
Type : Primary flow device
Range : 0 to 20 LPM
g) Magnetic Flow meter
Flowmeter : Highly accurate low measurement
device using the magnetic laws
Range : 0 to 20 LPM
Output : 4 to 20 mA
Communication : HART communication
h) Variable Area Flow meter:
Principle : Variable area
Range : 0 to 20 LPM
REQUIREMENTS
Electrical : 230VAC/1-phase/50Hz/13Amp
Water supply : Laboratory tap water
OVERALL DIMENSIONS
Height : 2.00 m
Width : 1.22 m
Depth : 0.61 m
MANUAL
The unit comes with Operating and Experimental
manuals in English.
TRAINING
Training shall be provided upon handing over of the
unit.
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
SOFTWARE & E - LEARNING
SOLDAS - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experimental Results
SOLCAL - Computer Aided Learning
- Multimedia Features
- Interactive
- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals
SOLTEQ®
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023
Email : [email protected] site : http//www.solution.com.my/
AGENT:
Equipment for Engineering Education & Research
BUATAN MALAYSIA
MSC- StatusCompany
®
®
Top Related