Traffic Signal Pole Leaflet
-
Upload
sapa-pole-products -
Category
Documents
-
view
99 -
download
2
Transcript of Traffic Signal Pole Leaflet
Traffic Signal Poles
by Sapa Pole Products
gives you the green light
Traffic Regulation Installations come in all shapes
and sizes. From gantries to push button poles. Sapa
Pole Products has developed a range of Traffic Signal
Poles that are suitable for all kinds of traffic situations.
Socket They are suitable for a 114 socket/root section which is often the existing situation in case of replacements/renovations.
Passive safe Sapa offers fully crash tested Traffic Signal Poles which are tested to EN12767 and certified to EN12899.
Low weight because of the material aluminium the poles have
The advantages of aluminium Traffic Signal Poles are:
a low weight, which makes them easy to install.
Doors The Traffic Signal Poles can be supplied with a reïnforced door to easily access the electricity functions.
Advice We can give you advice on the foundation of the pole according to the sign structures guide (SSG2010).
Traffic Signal Pole Selection Matrix
Push button pole Traffic Signal Pole 6m Cranked Traffic Signal Pole
Push button pole Traffic Signal Pole Cranked Traffic Signal Pole
Traffic Signal Pole 6m
Traffic Signal Pole ≥ 6**
Dimension bottom-top Dm 114-145 114-145 114-145 cr* 114-145 165-145
Length of post M 2 4 4,2 6 ≥ 6
Passive Safety classes 70NE2 70NE2 70NE2 70NE2 70NE2
100NE2 100NE2 100NE2 100NE2 100NE2
Max. bending moment Mu kNm 4,0 4,6 6,5 6,5 9,0
* Cranked pole (swan neck) ** D165 can be supplied with shear-off inside to reach 70NE3 or 100NE3. D165 can also be upgraded to bigger diameters up to d250 if more strength is needed. In those cases a shear-off inside the column is always needed to become passive safe (class 70NE3/100NE3).
Sapa Pole Products
Postal address
P.O. Box 75
NL-5150 AB Drunen
Netherlands
Visiting address
Alcoalaan 1
NL-5151 RW Drunen
Netherlands
Phone +31 416 386 200
Fax +31 416 386 230
Email [email protected]
Website www.sapapoleproducts.com
Sap
a P
ole
Pro
duct
s R
ev 1
UK
Sig
nal P
, Sub
ject
to p
rodu
ct c
hang
es, m
ispr
ints
and
prin
ting
erro
rs
Suitable for all kinds of traffic situations
_________________________________________________________________________________OCAB OCBS Boulevard de la Plaine Pleinlaan, 5 B-1050 BRUSSELS
Phone : + 32 2 509 14 09 Fax : + 32 2 509 14 00 E-mail : [email protected] : www.ocab-ocbs.com
©2004 OCAB/OCBS
Certificate of Conformity (CE-Certificate) 1
Boulevard de la Plaine Pleinlaan, 5 B-1050 BRUSSELS
1148 - CPD – (20)090709 According to the laws in force about the application of the directive 89/106/EEC of the Council of the
European Communities of 21 December 1988 regarding the construction products (Construction
Products Directive - CPD), it is certified by OCBS-OCAB (notified body Nr 1148) that
Sapa Pole Products Alcoalaan 1, NL-5151 RW Drunen P.O. Box 75, NL-5150 AB Drunen
In its factory of DRUNEN
applies a
Factory Production Control (FPC) according to EN 12899 for supports for use with fixed vertical road traffic signs.
The notified body has performed the Initial Type-Testing of the products, the Initial inspection of
the factory and of the factory production control and achieves the Continuous Surveillance,
Assessment and Approval of factory production control imposed by the harmonised standard EN
12899-1:2007.
This certificate stipulates that all the provisos relating to the attestation of conformity described in
Annex ZA of the standards under consideration have been applied. This certificate remains valid three
years from the date hereunder mentioned and so long as the conditions specified in the harmonised
standards, the conditions of production in the factory or the Factory Production Control do not change
significantly.
Brussels, July 09, 2009 (update of February 10, 2012)
Jacques DEFOURNY, Chairman of the Board
1/3
______________________________________________________________________________________________________OCAB OCBS Boulevard de la Plaine Pleinlaan, 5 B-1050 BRUSSELS
Phone : + 32 2 509 14 09 Fax : + 32 2 509 14 00 E-mail : [email protected] : www.ocab-ocbs.com
©2004 OCAB/OCBS
1148 - CPD – (20)090709
Sapa Pole Products in its factory of DRUNENCE-Certificate: List of Approved Products
Products Qualities and categories Dimensions
Harmonised standard under reference: hEN 12899-1:2007
Supports for use with fixed vertical road traffic signs including signal heads according to EN 12368:2006 and variable message traffic signs according to EN 12966-1:2009
Material – Extruded aluminium stepped or conical circular tubesGrade – fy = 160 N/mm² (characteristic elastic limit)
Dimensions expressed in nominal diameter and nominal wall thickness from 114 mm by 2.5 mm to 250 mm by 5.25 mm with
Structural Performance declared by the Producer according to hEN12899-1:2007, §5
Durability: Resistance to corrosion – Aluminium; SP1 with or without Performance under vehicle impact (passive safety) for single post supports:
1. Products with nominal diameter / nominal wall thickness 250 mm / 4.0 mm, with nominal height of 15 m and all smaller members, but over 2 m, supplied with internal shear mechanism and founded
using Standard Soil or Rigid (backfill type S or R). Performance under vehicle impact type 100,NE,3 (*)
2. Products with nominal diameter / nominal wall thickness 250 mm / 4.0 mm, with nominal height of 15 m and all smaller members, but over 2 m, supplied with internal shear mechanism and founded
using Standard Soil or Rigid (backfill type S or R). Performance under vehicle impact type 70,NE,3
3. Products with nominal diameter / nominal wall thickness 165 mm / 3.3 mm, with nominal height of 10 m and all smaller members, but over 2 m using Standard Soil or Rigid (backfill type S or R).
Performance under vehicle impact type 100,NE,2 (*)
4. Products with nominal diameter / nominal wall thickness 165 mm / 3.3 mm, with nominal height of 10 m and all smaller members, but over 2 m using Standard Soil or Rigid (backfill type S or R).
Performance under vehicle impact type 70,NE,2
(*) also including multilegged supports with clear distances greater than 1 600 mm in class 100,NE,2(according to EN 12767:2007, §4.3.7 and Annex F note C ; 1 600mm = 1 500/cos20°)
2/3
______________________________________________________________________________________________________OCAB OCBS Boulevard de la Plaine Pleinlaan, 5 B-1050 BRUSSELS
Phone : + 32 2 509 14 09 Fax : + 32 2 509 14 00 E-mail : [email protected] : www.ocab-ocbs.com
©2004 OCAB/OCBS
1148 - CPD – (20)090709
Sapa Pole Products in its factory of DRUNENCE-Certificate: List of Approved Products
Products Qualities and categories Dimensions
Harmonised standard under reference: hEN 12899-1:2007
Supports for use with fixed vertical road traffic signs including signal heads according to EN 12368:2006 and variable message traffic signs according to EN 12966-1:2009
Material – Extruded aluminium stepped or conical circular tubesGrade – fy = 160 N/mm² (characteristic elastic limit)
Dimensions expressed in nominal diameter and nominal wall thickness from 114 mm by 2.5 mm to 250 mm by 5.25 mm with
Structural Performance declared by the Producer according to hEN12899-1:2007, §5
Durability: Resistance to corrosion – Aluminium; SP1 with or without
Performance under vehicle impact (passive safety) for shored up multi-legged supports:
5. Products made of multi-legged and shored up supports with nominal diameter / nominal wall thickness 145 mm / 3.0 mm and an offset of 2250 mm at ground level, supplied with internal shear-
mechanisms in each leg, used for a maximum sign plate-height of totally 7.5 m and all smaller heights, founded using standard Soil or Rigid (backfill type S or R).
Performance under vehicle impact type 100,NE,2 (*)
(*) also including multilegged supports with clear distances greater than 1 600 mm in class 100,NE,2(according to EN 12767:2007, §4.3.7 and Annex F note C ; 1 600mm = 1 500/cos20°)
Brussels, July 09, 2009 (update of February 10, 2012)
Jacques DEFOURNY, Chairman of the Board
3/3