Stitch Overseas Private Limited

Company Profile – Die and Mold Division

Stitch

Sourcing Technology Globally

Partners – Molds & Dies

Steady Stream Business Company Limited

Pioneer in Plastic Injection Mold manufacturing, Taiwan

Since 1987. www.steady-stream.com

Sandhar Tooling Private Limited

Equity holding company. Manufacturers of High Pressure

and Low Pressure Aluminum die casting dies, Manesar

India since 1985. www.sldl.com

Partners – Press Dies

Endwell Enterprise Company Limited

An Expert Manufacturer of Progressive Dies, Compound Dies, Fine

Blanking Dies, Draw Dies and Hand Transfer Dies Since 1976.

www.endwell.com.tw

Shin Young Co. Limited

Pioneer in Automotive Skin Panel, High Tensile & Hot Forming Die

Manufacturing, from Korea since 1996. www.shym.co.kr

COC Tooling & Stamping Co. Limited

Pioneer in Automotive Skin Panel Die Manufacturing. Previously

Ogihara, Taiwan since 1990. www.twcoc.com.tw

KianShen Corporation

Pioneer in Frame and Chassis Die Manufacturing and Stamping,

from Taiwan since 1955. www.kianshen.com.tw

Partner – Prototype

ZYBODY CO. LTD.

Pioneer in Proto Parts and Proto Assemblies for A Class (Skin

Panels), B Class (BIW underbody parts), High Strength Steel Parts

(up to 590Mpa), Ultra High Strength Steel Parts (up to 980Mpa) and

Hot Forming Parts (above 980Mpa) for Automotive application.

Have ability to make complete BIW assembly.

www.zybody.net

Activity Profile-1(Progressive Dies)

We have executed many Turnkey Projects for Supply of Press Tools and High Speed Presses to companies like Havells Group and for the requirements of ABB at Haridwar. This is besides Progressive Tools being supplied to other companies viz. JBM, Neel Metal, Cosmo, Sigma and Larsen & Turbo Limited, Caparo, Schneider etc.

We has the capability to offer solutions for different materials like Stamping Dies for Carbon Steel- Cold & Hot Rolled Steels, High Strength Low Alloy (HSLA) Steels, Dual Phase Steels, Ultra High Strength Steels, Stainless Steels, Copper, Brass, Beryllium Copper in sheet thickness ranging from 0.015 mm to 12 mm, Die Casting Dies for Aluminum, Magnesium, Zinc and Molds for a wide range of Plastics etc.

Progressive Die: Reference Component

Outer Metal (3.2mm Thick, SAPH 440)

Deep Draw Progressive Die with 12 station

Die Size:- 2200 x 600 x 550mm

Press Tonnage:- 315 Ton

Ø45.4 +/- 0.2 Draw Height 40mm

Ø 111.38 +/- 0.2mm

Deep Draw Parts Precision Parts

Hand Phone Covers Automotive Parts

Progressive Die: Reference Component

Activity Profile – 2 (Stamping Dies)

Stitch formed an alliance with M/s COC Tooling & Stamping Co. Limited, Taiwan in 2006 for Automotive Class A & B and High Tensile Panel Dies.

Executed Projects of Back Door Dies for Maruti Zen Estilo, Ritz, Wagon R, Swift Hatch Back & Notch Back, Alto Minor with Semiautomatic Welding Jig, Ciaz and Roof & Body Side frame for Fiat Linea & Punto, Mahindra LCV & MPV Models A Class & B Class(High Tensile) Body panels & Ashok Leyland New Cab.

Projects under execution for Maruti Upcoming New Model, Mahindra Upcoming New Model for B Class High Tensile Panels and Body panels for Ashok Leyland New Cab

Executed Dies for B Class High Tensile parts with tensile strength up to 590 MPa of thickness 1 mm to 2.3 mm.

Activity Profile – 3 (Stamping Dies)

Stitch formed an alliance with M/s Shin Young Co. Limited, Korea in 2012 for Automotive Class A & B, High Tensile, Ultra High Tensile and Hot Forming Panel Dies.

Executed Projects of High Tensile panel dies for Maruti Ciaz, Alto K10.

Projects under execution for Maruti Upcoming New Model. Mahindra Model S101 A Class (Side Body Outer) & B Class (High Tensile) ,B515 and B562 Side Body Panels for Ford India.

Executed Dies for B Class High Tensile parts in India with tensile strength up to 780 MPa of thickness 1 mm to 2.3 mm.

Reference Parts: Passenger Cars

Front Fender Body Side ( Rear Quarter)

Hood Assembly Sun Roof Assembly Front Door Assembly Rear Door Assembly

Front Floor Assembly Rear Floor Assembly

Deck Lid Assembly Tail Gate Assembly

Activity Profile – 4 (Stamping Dies)

Stitch formed an alliance with M/s Kian Shen Corporation, Taiwan in 2014 for Heavy Commercial Vehicles.

Projects under execution for Daimler India Commercial Vehicle, Chassis/Frame parts of strength 590 MPa of thickness 6.0 mm with 3.5 meter length, 10mm thickness with 3.0 meter length and 12.0 mm thickness with 1.0 meter length in Upcoming Model.

Reference Parts: Commercial Vehicles

FRONT C/MBR FRONT C/MBR

FRAME

LOWER ARM

Business Content 1. Design and Manufacturing of:

Stamping Die

Checking Fixture

Assembly Fixture

Prototype Parts

Prototype Assemblies

For BIW & Skin Parts

2. Design and Manufacturing of:

Stamping Die

Checking Fixture

Assembly Fixture

For Chassis & Frame Parts

3. Turn Key Management.

Activity Profile – 5 (Prototype)

Stitch formed an alliance with M/s Zybody Co. Ltd., China in 2015 for all kind of Prototype Parts and assemblies for Automotive Applications.

Reference Parts: Prototype

Reference Parts: Prototype

Industry Served

Automotive Industry

Switchgear Industry

HCV & LCV Industry

General Engineering Industry

White Goods Industry

Yellow Goods Industry

Indian Customers

Maruti Suzuki India Limited

Mahindra & Mahindra Limited

Fiat India Limited

Ashok Leyland Limited

Daimler India Commercial Vehicles

Gestamp Automotive India Private Limited

TVS Motor Company Limited

Belsonica India Private Limited

Caparo Engineering Limited

Jay Bharat Maruti Limited

Omax Autos Limited

Neel Metal Products Limited

Havells Group

Schneider Electric India Private Limited

Control & Switch Gear Private Limited etc..

Stitch Advantage !

Well Recognized in the Indian Automotive, Engineering and their Ancillary Industries. Well Experienced in working with International companies. Strong relationship with Existing customers. High reliability to meet the delivery as per allocated schedules. Experience of serving a diverse portfolio of Industries, thus catering

to a wide customer base. Always open to new possibilities to backward/forward integration.

Contact Details

Further any Assistance/Information related to any query

Please Contact

Lovkesh Ashwin Dilish

+91 - 9311361206 +91 - 9311361207

Projects@stitchtools.com Stamping@stitchtools.com

Thank You!!