Steels for the Oil Gas industry - Liberty House · PDF fileSteels for the Oil & Gas industry...
Transcript of Steels for the Oil Gas industry - Liberty House · PDF fileSteels for the Oil & Gas industry...
Steels for the Oil & Gas industryEngineered for extreme environments
Our diverse steel portfolio ranges from alloys to corrosion-resistant stainless steels. These products enable our Oil & Gas customers to improve reliability and durability, while extending component operating life, thereby lowering the total cost of ownership.
Our steels are ideal for both on and off-shore extraction activities which require high strength steels for drill-strings or specialised completion tools used in shale extractions.
www.libertyspecialitysteels.comMEMBER OF
Liberty Speciality Steels7 Fox Valley Way, Stocksbridge, Sheffield, S36 2JA, United Kingdom
T: + 44 (0) 114 288 2361 E: [email protected]
Version Number: 001 Date: July 2017
While care has been taken to ensure that the information contained in this publication is accurate, Liberty Speciality Steels and Liberty House Group do not accept responsibility or liability for information which is found to be misleading.
©Copyright 2017 Liberty House Group
Contact Us
2
Customer Approvals Third Party Approvals
Baker Hughes Germanischer Lloyd
Cameron Lloyds Register
Halliburton
National Oilwell Varco (NOV)
Smith International
Weatherford
Oil & Gas Rolled BarMechanical Properties Diameter
0.2% UTS El R of A HBW CVN Related Specs In 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PS ksi ksi % % (min/max) mean mm 25.4 50.8 76.2 101.6 127.0 152.4 177.8 203.2 228.6 254.0 279.4 304.8 330.2 355.6 381
Alloy Steels4130 75 95 18 35 217/235 27J @ -60°C NACE MR0175/ISO15156,
API 6A
4140 80 100 20 45 217/235 42J@-32°C NACE MR0175/ISO15156, API 6A
4140 Mod 80 100 20 45 217/ 235 42J@-32°C API 6A
4140 110 125 13 35 285/ 341 27J@-32°C API 6A
4140 125 135 11 40 301/352 25J@0°C
4140 Mod 110 125 13 40 286/ 341 27J@-32°C API 6A
4145H Mod 110 140 14 45 285/ 341 27J@-32°C API 7-1
4145H Mod 120 140 14 45 285/ 341 42J@-32°C API 7-1
4145H Mod 125 140 14 45 285/ 341 30J@-32°C API 7-1
8630 Mod 85 100 17 35 /235 42J@ 60°C
8630 Mod 110 130 13 35 /241 27J@-30°C
4330V 135 145 14 50 286/341 50J@-40°C
4330V 150 160 14 45 321/ 375 32J@-20°C
4330V 155 165 14 45 341/ 388 32J@-20°C
EN30B 135 160 13 50 /388 30J@-46°C BS970
4340 105 120 14 35 /321 40J@-20°C
4340 135 150 13 40 /375 27J@-20°C
9CrMo1 80 100 45 40 217/235 50J@-10°C NACE MR0175/ISO15156
Stainless Steels410 80 100 18 45 217/235 27J@-10°C NACE MR0175/ISO15156
420 80 100 20 45 217/235 25J@-10°C NACE MR0175/ISO15156
17/4PH 105 135 18 50 /311 27J@-60°C NACE MR0175/ISO15156
Super13Cr 95 105 20 45 /29 HRC 81J @ -10°C (L) UNS S41427, NACE MR0175/SO15156
67J @ -10°C (T)
Super13Cr 110 125 13 45 /32 HRC 81J @ -10°C (L) UNS S41427, NACE MR0175/SO15156
67J @ -10°C (T)
HyPer GradesHyPer 30 95 105 18 40 19/25 HRC 42ft.lbs@-40°C M0177 - Method A
HyPer 30 125 135 14 40 29/34 HRC 2ft.lbs@-40°C TM0177 – Method A
HyPer 45 130 145 13 35 302/352 42J@-20°C
HyPer 30 V 165 175 14 45 350/392 47J@-23°C
AccreditationsBS EN ISO 9001BS EN 9100BS EN ISO 17025 (testing)Nadcap: Heat treatment, NDT, Material testingISO 14001NORSOK M650
Product Range
ProductsBars & Billets
Hot Rolled Rounds 1” >15” 25.4mm >381mm
Technical support We have a comprehensive technical support team available to advise on grade selection and product range to achieve the maximum benefit. Customer Technical Support provide specialist advice and help with day-to-day problem solving.
Works based metallurgists and the full resources of our Steel Research and Development Laboratories are available to assist with longer-term developments.
For further information, enquiries or any technical guidance on our range of Oil & Gas products please contact the Commercial Department at the address below.
Capable at mid-radius Capable at 1” below Please enquire