SPRAY GUNS & ACCESSORIES for CAR REFINISHING · Airbrush Compressors ARTOOL Templates _____ 14...
Transcript of SPRAY GUNS & ACCESSORIES for CAR REFINISHING · Airbrush Compressors ARTOOL Templates _____ 14...
SPRAY GUNS &ACCESSORIES for
CAR REFINISHING
• Nozzle orifice
• Air pressure
• Air consumption
• Fluid output
• Pattern width
• Air cap set
• Max. fluid pressure
• Pressure ratio
• Max fluid pressure
• Delivery/cycle
• No. of cycles per minute
• Max fluid delivery
• Suction filter
• Weight
WB BASECOATS & CLEARCOATSWS 400 EVO ______________________________________________________ 2 LS 400 ENTECH __________________________________________________ 3
WB BASECOATS & CLEARCOATSW 400 WBX W 400 WB W 300 WB _________________________________________________________ 4
WB & SOLVENT BASECOATSW 400 BellAria W 300 _____________________________________________________________ 5
WB & SOLVENT BASECOATSLPH 400 LV LPH 300 LV ________________________________________________________ 6
SPOT REPAIR & PRIMERSLPH 80 AZ3 HTE-S Impact / AZ3 HTE 2 ____________________________________ 7
INDUSTRIAL BODYSHOPComplete SetPC18 D ____________________________________________________________ 8
ACCESSORIESMIX&SPRAY CupMANOMETER for spray guns Swivel quick couplingSupports for gravity guns ________________________________________ 9Magnetic Support MAG-STAND ___________________________________ 10
INFRARED DRYING SYSTEM NFRARED UNITSAQUADRY _________________________________________________________ 11
CLEANING SYSTEMKUIKIWK H2OINOX LINE AQUA (mod. ILA)INOX LINE SOL (mod. SLD) ________________________________________ 12
OPERATOR PROTECTIONAIRFED MASK 2010VIPER GUARD MASK ______________________________________________ 13
CUSTOM PAINTINGAirbrushCompressorsARTOOL Templates _______________________________________________ 14
RECOMMENDATION CHART WS 400 / LS 400 __________________________________________________ 15
INDEX
ANEST IWATA PATENTEDPRE-ATOMIZATION TECHNOLOGY
0,05 bar
0,1 bar
0,2 bar
0,3 bar
STANDARD WB
2
Large and medium areasLS 400 ENTECH GRAVITY
ENVIRONMENT AND PERFORMANCE
The new Entech LS400 represents the completion of the Supernova
range of products. Entech LS400 offers to professional users a wide range
of applications for Water Base Coats of second and third generation
according to weather conditions (hot and dry climates and cold and high
humidity climates) with a choice of 2 different set ups, ET and ETS.
HVLP technology and Pre atomization technology coupled together
give to users a very high comfort of application, a stable and large fan pattern,
high stability in droplet sizes and maximum material savings at only 400 lt air volume.
designed by
Model Type ofapplication
LS-400-1205 ET 1.2
1.8
400
150
spra
y di
stan
ce 1
30 m
m
250
spra
y di
stan
ce 2
00 m
m
350sp
ray
dist
ance
300
mm
LS-400-05
695with cup
475without cup
Standardapplication
LS-400-1305 ET 1.3 160
LS-400-1405 ET 1.4 170 260 360
LS-400-1505 ET 1.5 180 265 365
LS-400-ETS12 ETS 1.2
420
150 230 305 390Wetter & Longer
spray distanceapplication
LS-400-ETS13 ETS 1.3 160235 310
400
LS-400-ETS14 ETS 1.4 180 410
LS-400-ETS15 ETS 1.5 190 240 320 425
ø mm bar Nℓ/min m/min MIN gNo.MAX MAX
DRY application WET application
STANDARD climate HOT & DRY climate
COMPLIANTEVOTECH
HVLPENTECH
ET series1.2 - 1.5 ET
STANDARD series1.3 - 1.4B - 1.3 OBS
HD series 1.3 - 1.5 HD
ETS series1.2 - 1.5 ETS
High humidityLow temperature
Low humidityHigh temperature
A long flat uniform spray pattern with a fineand consistent droplet size achieves
an easily controlled paint overlap,this also gives you a premium quality application
of all paints with its superior wet control.
HVLP
STANDARD SUPERNOVALS400 & WS400
WB BASECOATS & CLEARCOATS
3
designed by
Large and medium areasWS 400 EVO GRAVITY
KAI [to change]ZEN [to improve]
An evolving intelligenceThere is a word that can be found throughout Japanese history which is still usedto this day: The word “KAIZEN” is made up of two words, “KAI” & “ZEN”.KAI when translated means to change, while ZEN means to make good or best.When you put these two words together you get “ change for the best”.KAIZEN is a daily Japanese process that strives for improvement and perfection.The WS400 Evo has new features which take the WS400 to an even higher level of KAIZEN.
New and improved easy release paint cup system The new locking thread system enables you to experience a secure and precise screwing and unscrewing of the paint cup.
Reliable and Precise settingWS400 Evo has new sturdy constructed high precision adjusters.The carefully designed grip delivers the professional painter a reliable and more importantly comfortable feeling even when wearing latex gloves.
ANEST IWATA TechnologyPininfarina DesignThe WS400 has always stimulated passion within the painter with its looks as well the wayit performs. The new WS400 Evo steps it up again with its new corrosion resistant parts.These new parts not only help the gun stay functional but also help keep the WS400 Evo’s stunning looks throughout its working life.
Model Type ofapplication
WS-400-1201 EVO 1.2
2.0 370
120
spra
y di
stan
ce 1
30 m
m
250
spra
y di
stan
ce 2
00 m
m
350
WS-400-01
695with cup
475without cup
Standardapplication
WS-400-1301 EVO Base BASE 1.3 140
260
365WS-400-1301 EVO Clear CLEAR 1.3170
WS-400-1401 EVO Base BASE 1.4
WS-400-1401 EVO Clear CLEAR 1.4 190 370
WS-400-1301OBS EVO Base 1.3 OBS 160 365
WS-400-1301HD EVO Base1.3 HD 220 265 365
Wetterapplication
WS-400-1301HD EVO Clear
WS-400-1401HD EVO Base1.4 HD 240 270
370WS-400-1401HD EVO Clear
WS-400-1501HD EVO Base1.5 HD 260 275
WS-400-1501HD EVO Clear
ø mm bar Nℓ/min m/min MIN gNo.MAX
manometer
HIGH TRANSFEREFFICIENCY
Large and medium areas
W 400 WB GRAVITY
• Twilightchromeplatedbody• HighTransferEfficiency(upto90%)• LowAirConsumption:230l/min• Flat&Thinspraypattern• Paintpassagesinstainlesssteel• Extraairvalveforcolourfading• Onlyonevalveforairandfluid• Testedandapprovedby the major paint producers
pre-atomization technology
W300WB-101G 1.0
1.5 190
65 230
WB1 320W300WB-121G 1.2 100 240
W300WB-141G 1.4 125 250
Model
ø mm bar Nl/min ml/min mm gNo.
Medium and small areasW 300 WB GRAVITY
• Twilightchromeplatedbody• HighTransferEfficiency(upto90%)• LowAirConsumption:190l/min• Flat&Thinspraypattern• Paintpassagesinstainlesssteel• Extraairvalveforcolourfading• Onlyonevalveforairandfluid• Testedandapprovedbythemajorpaintproducers
pre-atomization technology
250cc
4
Large and medium areasW 400 WBX GRAVITY
• TheWBXapplieswaterbornebasecoatsandHSclearcoats with superior atomization and control.
• TheWBXaircaphasalong,flatfanpattern, which gives an even overlap on modern paints. This is essential for mottle-free basecoat application and a flat and even lay down on clears.
• TheWBXdeliversaconsistentdropletsizewhenatomizing. This is vital to achieve a consistent application of waterborne basecoats.
• Fluiddeliverycontrolisessentialforcolourreproduction of waterborne basecoats.
Model
ø mm bar Nl/min ml/min mm gNo.
W400 WBX-124G 1.2
2.0 370
150 360
WBX 380W400 WBX-134G 1.3 195390
W400 WBX-144G 1.4 200
pre-atomizationtechnology
W400 WB-101G 1.0
1.8
230
90 230
WB1
380
W400 WB-121G 1.2 120 260
W400 WB-131G 1.3 140 280
W400 WB-141G 1.4
160
290
W400 WB-132G 1.3
390
300
WB2W400 WB-142G 1.4 310
W400 WB-162G 1.6 250 340
Model
ø mm bar Nl/min ml/min mm gNo.
WB BASECOATS & CLEARCOATS
W300 - 081 G 0.8 2.0 80 65 100 E1
320W300 - 101 G 1.02.5
145 100 130 K1
W300 - 132 G 1.3 225 160 175 H2
Model
ø mm bar Nl/min ml/min mm gNo.
Medium and small areasW 400 BellAria GRAVITY
• WehaveimprovedtheoutstandingLV2aircap with two unique new air caps with technology Flat & Thin™
• Only250/270l/minairconsumption,givingthesprayer an excellent control of the fluid build
• Stable,largeandcompactpatternshape
• PerfectforClearCoatHS
W400-104G 1.0
2.0
250130 200
BA4-1
380
W400-124G 1.2 180 220
W400-134G 1.3
270
220 280
BA4-2
W400-144G 1.4 250 300
W400-164G 1.6 285 330
W400-184G 1.8 360 375
W400-204G 2.0 375 390
Model
ø mm bar Nl/min ml/min mm gNo.
Medium and small areasW 300 GRAVITY
• Twilightchromeplatedbody• HighTransferEfficiency(upto90%)• LowAirConsumption:80/225l/minat2.5bar• Flat&Thinspraypattern• Paintpassagesinstainlesssteel• Extraairvalveforcolourfading• Onlyonevalveforairandfluid• Testedandapproved by the major paint producers
5
250cc
Others
STANDARD BELLARIA
WB & SOLVENT BASECOATS
Large and medium areas
LPH 400 LV GRAVITY
• LowVolumeLowPressure• Twilightchromeplatedbody• HighTransferEfficiency• Lightandeasytouse• LowAirConsumption:280l/min• Paintpassagesinstainlesssteel• Extraairvalveforcolourfading• Onlyonevalveforairandfluid• Weight:380gr.• Testedandapproved by the major paint producers
Medium and small areasLPH 300 LV GRAVITY
• Idealfortouchupwork• Twilightchromeplatedbody• Lightandeasytouse• Paintpassagesinstainlesssteel• Weight:320gr.
patentedpre-atomization
technology
Model
LPH 400 124LV 1.2
1.1
270
90 260
LV4 380
LPH 400 134LV 1.3 110 280
LPH 400 144LV 1.4 130 290
LPH 400 164LV 1.6 150 270
LPH 400 184LV 1.8 190 320
ø mm bar Nl/min ml/min mm gNo.
patentedpre-atomization
technology
Model
LPH 300 104LV 1.0
1.0 200
80 180
LV4 320
LPH 300 124LV 1.2 90 210
LPH 300 134LV 1.3 120 220
LPH 300 144LV 1.4 130
230LPH 300 164LV 1.6
1.3 240
110
LPH 300 184LV 1.8 130
LPH 300 204LV 2.0 150
bar Nl/min ml/min mm gNo.ø mm
6
SPOT REPAIR & PRIMERS
Spot-RepairLPH 80 GRAVITY
• Forsmallrepairs• Compactandlightweight(only205gr.)• Fineatomization• Twilightchromeplatedbody• Suitableforsolventandwaterbasedpaints• PTFEpacking• 70ccor250ccgravitycup• Testedandapprovedbythemajorpaintproducers
PrimersAZ 3 HTE-S Impact - AZ 3 HTE 2
• NEWHTE-Shighperformancespraytechnology. Homogeneus and fine atomization with all modern WB and HS coatings.• Partsincontactwithfluidinstainlesssteel• Responsivetriggeraction• Highqualitychromeplatedbody
• Lightweight,wellbalancedbody• Newairflowvalve• ImprovedAKULONcup• Pressureassistedcupmodel• SparepartscompatiblewithpreviousAZ3HTE
Model
LPH 80 044G 0.4
1.0 50
8 40
E4 205
LPH 80 064G 0.6 25 60
LPH 80 084G 0.8 40 80
LPH 80 104G 1.0 55 100
LPH 80 124G 1.2 80 120
bar Nl/min ml/min mm gNo.ø mm
7
Model
AZ3 HTE-S IMPACT
1.2
HTE-S2
2.0 - 2.5
250
375
19
1.3 275 210
1.4 290 230
1.6
HTE-S2
300
362
230
1.6 315 250
2.0 330 270
AZ3 HTE 2
1.3
-
2.0
150200
240
1.5 190 260
1.8 260205
300
2.0 265 310
2.5
3.0
424 279 340
3.0 489 288 360
3.5 490 307 340
ø mm bar Nl/minml/min mmNo.
INDUSTRIAL BODYSHOP
PC 18 D Pressurized container
• Maxoperatingfluidpressure:3.5bar• Capacity:2litres• Airregulator• Safetyvalve• Checkvalve
Available in two versionsPC 18 DPC 18 DT, Internal teflon coating
COMPLETE SET
• 1PumpDPS 120• 1SprayGunW 200 WB• 1twinhoseair/paint10m
Model
DPS 120 C / DPS 120 C WB 1:1 7.0 7.0 150 200 30 50
bar
BA
n:n bar ml/cycle cycles/min l/min mesh
Model
W200WB-081P 0.8
1.6 340
200340
WB1 380W200WB-101P 1.0 250
W200WB-121P 1.2 300 380
bar Nl/min ml/min mm gNo.ø mm
8
W200 WB SUCTION
With PCL10 suction container
Model
W200WB-081P 0.8
1.6 340
200340
WB1
380
W200WB-101P 1.0 250
W200WB-121P 1.2 300 380
W200WB-141P 1.4 350 420
W200WB-162S 1.62.0
170250
315WB2
W200WB-182S 1.8 200 330
bar Nl/min ml/min mm gNo.ø mm
ACCESSORIES
MANOMETER for SPRAY GUNS
• Airpressurecontrolfrom0to10bar
• Nipple1/4”F-1/4”M
SWIVEL QUICK COUPLING
Profile EURO F 1/4” G
SUPPORTS FOR GRAVITY GUNS
Different models available
9
BASECOAT FILTER 125µ
PRIMER AND CLEARCOAT FILTER 250µ
MIX&SPRAY CUP
•Environmentallyfriendly
•OnlyonecontainerforMixingandSpraying
•Antidripsystem
•Verylowcost
•Saveoncleaningtimeandcleaningmaterials
•Recyclableorreusable
MAGNETIC SUPPORTS
ACCESSORIES
Model Cod. Note
MAG-STAND Gravity Gun HolderW2COM6120 450g L80 x H152 x P134 for 1 gun
W2COM6052 1650g L320 x H152 x P134 for 3 guns
MAG-STAND disposal cup adaptor holder W2COM6093 65 g L45 x H54 x P83 for one each gun (for a gun with PPS, RPS adaptor)
MAG-STAND Hose holder W2COM6094 1730g L320 x H198 x P138 max. hose length approx. 20m
g mm
10
INFRARED UNITS
The use of short wave infrared technology enables body fillers,
primers and paints to be cured in
10 minutes as opposed to 45 minutes in an oven.
Anest lwata infrared mobile drying systems provide
a fast, efficient answer for all your local body repairs.
Infrared units are a cost effective method of paint drying,
and curing can be achieved in just minutes,
using the highly effective short wave infrared lamp.
Anest Iwata infrared units are available in a number of options.
Max adjustable length 80 cm
2 Aquadry gunsindependently adjustable height from 0 to 210 cm
Sturdy and dismountablesteel basewith rubber foot62x62 cm
Models available:1 KW and 2 KW on stand 3 KW, 4 KW and 6 KW on cart
INFRARED DRYING SYSTEM
AQUADRY KITFOR THE ACCELERATED DRYINGOF WATERBASED COATINGS
• Gunsareprovidedwithquickcouplings which allow fast disassembly.
• Airregulatorincluded
• Gunsareeasilyadjustable
• Eachguncanbeusedindependently
• Venturiairentrainmentincreasesairflowby6:1
• Thestandhasaslideandlockheightadjustment. Gun brackets can be moved along the length of the arm and positioned to suit.
• Variableairflow
• Maxpressure:7bar
• Maxairconsumption:2x600l/min
210
cm
80 cm
11
Available with distance / temperature sensor.
CLEANING SYSTEM
IWK H2O FOR WATER BASED PAINT ONLY
INOX LINE AQUA (mod. ILA) FOR WATER-BASED PAINTSINOX LINE SOL (mod. SLD) FOR SOLVENT-BASED PAINTS
A small and cost-effective pneumatically operated machine for manually washingwater-based paint from spray guns and small objects.The instruments, located on the front section, make it easy to use.The spray-washer is fitted with a small pump and sprayer whict draws clean water froma container located at the bottom of the machine and a second sprayer for final washing which is connected to the company’s water supply.A blowing gun then cleans and dries the guns and washed pieces.
SEPARATING THE PAINT FROM THE WATER:The stainless steel washing tank has an internal system that mixes the dirty waterwith flocculating powder. The water and coagulated colour deposit are then discharged by a valve in the filter bag kit, where the solid particles are separated from the waterparticles. The filtered water can be re-used for washing.
Stainless Steel (Electroclean) Spray Gun Washers • Weight:ILA53kg/SLD63kg• Dimensions:60x70x149cm• Operatingpressure6˜10bar• Airconsumption6bar:130l/min• Mod.SLD:2pumps(washingandrinsing)• Mod.ILA:1pump
12
MINI GUN WASHER Water/Solvent
KUIK is a small, compact and unique Water and SolventGun Wash Machine possible to be used inside or outsidespray booth and easy to be transported.
This Gun Washer has separate nozzle for cleaning insidethe paint channel or outside the bodywith clean and dirty water and solvent,so it is possible to pre-clean with dirty water or solventand to do the final wash with clean water or solvent.
The Gun Washer has an aspiration system to avoidresidual gasses remain trapped.An air blow gun is also available to dry the gun.
DIMENSIONS:450 x 280 x 840 h mm
WEIGHT:: 15 kg
AIRFED MASK 2010
VIPER GUARD MASK
The ANEST IWATA Europe Airfed 2100 is functional and stylish.
Suitable for use with previously filtered compressed air.
Conforms to the European Standards for light duty
• Floatingheadbandadjustmentformaximumcomfort
• Comfortsweatband
• Easilyadjustableheadbandratchet
• Widevisionvizor
• Cartridgetypevisioncassette
• Replaceablevizorcover
• Lownoiseairdiffuser
• Airfilterregulatormountedonpliablebracket
• Carbonfilter
• Adjustableaircontrolregulator
• Visualairflowcheck
• 1,25metrehose(innerø8mm)forHVLPspraygun
• Airregulator1barpre-set
• Downwardairflowforgreatercomfort
• Yconnectionandairhoseforthegun
VIPER GUARD MASK filters feature a low profile angle designfor minimal visual impairment, and easy to use bayonet fittings.They also have a built in inhalation valve that means each timea new filter is used the valve is replaced making VIPER GUARDrespirator itself easier to maintain.
OPERATOR PROTECTION
13
1
2
3
4
1
2
3
4
1. Low Profile Angle Filter Designed for minimum visual impairment
2. Bayonet fitting Easily attached to VIPER GUARD respirator with a secure fit when applied
3. Inhalation Valve The filter features a built in inhalation valve making the respirator easier to maintain
4. Reduced Breathing Resistance Large open area allows for lower breathing resistance and improved comfort
AIRBRUSH
COMPRESSORS
ARTOOL TEMPLATES
While all Iwata products are designed and manufactured to the highest standards without compromise, each series has a distinct advantage for different types of applications.
Powerful, compact and remarkably quiet, these reliable compressors,with oil-less piston motors, are low maintenance and affordably priced.All Studio Series Compressors are sold complete with fi ttings, fi lters,airhoses and an adpater to fi t any airbrush.
The Artool™ Freehand™ Airbrush Templates are a real asset to anyone who uses an airbrush.
These SOLVENT PROOF templates can be easily fl exed or curved around irregular shaped surfaces and cleaned with solvents without being damaged.
For further information please visit: www.airbrush-iwata.com
High Performance Plus• HP-BCPlus
Eclipse• HP-BCS
CUSTOM PAINTING
Custom Micron• CM-CPlus
Hi-Line• HP-TH
IS 975 Power Jet ProIS 850 Smart Jet
14
www.anest-iwataeu.comwww.supernovaspray.com
WS 400 BASEWS 400 CLEAR
LS400 (HVLP)
BASE COAT CLEAR COAT
AKZO
NOB
EL G
ROUP
LS400 1.3 ETLS400 1.4 ET
1.3 HD1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETLS400 1.4 ET
1.3 HD1.4 HD Ø
1.8 2.0 AIRPRESSURE
BASF
GRO
UP
LS400 1.5 ETS 1.3 HD (1.3.2)1.4 HD (1.4.2) Ø
1.8 2.0 AIRPRESSURE
LS400 1.4 ETS 1.3 HD (1.3.2)1.4 HD (1.4.2) Ø
1.8 2.0 AIRPRESSURE
AXAL
TA G
ROUP
WS400 1.3 OBSLS400 1.3 ET 1.4 HD Ø
2.0 2.0 AIRPRESSURE
WS400 1.3 OBSLS400 1.3 ET 1.4 HD Ø
2.0 2.0 AIRPRESSURE
WS400 1.3 OBSLS400 1.3 ET 1.4 HD Ø
2.0 2.0 AIRPRESSURE
PPG
GROU
P
LS400 1.3 ETSLS400 1.4 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETSLS400 1.4 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETSLS400 1.4 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETSLS400 1.4 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ET 1.4 HD Ø
1.8 2.0 AIRPRESSURE
LS400 1.3 ETS 1.4 HD Ø
1.8 2.0 AIRPRESSURE
RECOMMENDATION CHARTS
A new constellationfor professional sprayers
ANEST IWATA Europe - Corso Vigevano 46, 10155 Torino - Italy
Tel. +39 011 22 74 402 - Fax +39 011 22 74 000
[email protected] - www.anest-iwataeu.com
ANEST IWATA Italia Corso Vigevano 4610155 Torino - ItalyTel.+39 011 24 80 868Fax +39 011 85 19 44
ANEST IWATA CORP.Yokohama - JAPAN
www.anest-iwata.co.jpANEST IWATA France25 rue de Madrid 38070Saint Quentin Fallavier - FranceTél. +33 (0)4 74 94 59 69Fax +33 (0)4 74 94 34 39
Ed
. 201
4/50
0
ANEST IWATA U.K.7 Chester Road,Colmworth Business Park, Eaton SoconSt.Neots, Cambridgeshire - PE19 8YTTel. +44 (0)1480 40 54 19Fax +44 (0)1480 21 76 10
ANEST IWATA ScandinaviaÖgärdesvägen 6C 433 30 PARTILLE - Sweden Tel. +46 31 340 28 60Fax +46 31 340 28 69
ANEST IWATA Iberica Calle de Les Teixidores 3-508918 - Badalona - BarcelonaTel. +34 93 32 05 993Fax +34 93 32 05 965
ANEST IWATA DeutschlandMommsenstrasse 504329 LeipzigTel. +49 (0)341 241 443 0Fax +49 (0)341 252 559 5
ANEST IWATA CORP.Akita - JAPAN
www.anest-iwata.co.jp
AIR GUNSA s.r.l. Cardano al Campo (VA) - ITALY
www.airgunsa.com