Specialist EoD/iEDD and tactical Equipment€¦ · The DX10U Dual Initiator is a safety initiator...
Transcript of Specialist EoD/iEDD and tactical Equipment€¦ · The DX10U Dual Initiator is a safety initiator...
DX10U DUal initiator Specialist EoD/iEDD and tactical Equipment
Due to continual product development, descriptions and specifications are subject to change without prior notification and such details must not be used for contractual purposes.
ALLEN VANGUARD and the Allen Vanguard logo are trademarks of Allen-Vanguard Corporation.
Allen Vanguard is ISO 9001:2000 Certified.
Forced-Entry Tools are for demanding, precise operations, especially when there are no second chances. All Allen Vanguard equipment is durable and built to perform when you need it most.
Prin
ted
in C
anad
a D
X10
U_3
0 JU
NE
08_
EN
_V1
The DX10U Dual Initiator is a safety initiator used for explosive firing. The dual initiator directly fits threaded nonel line or uses the breach block for custom length applications using standard shotgun primers. There are two safety systems to prevent unintentional firing of the initiator: a colour-coded safety knob and a safety pin. The colour-coded safety knob indicates when the initiator can be fired. The safety pin prevents accidental firing. The revised design accommodates both short and long styles of pre-terminated nonel line.
These lightweight initiators are coated with a hard anodize finish, giving it a hard, smooth, yet durable surface that won’t wear down during repetitive firing. The casing is made of aircraft strength aluminum, which has the added advantage of being nonmagnetic and non-sparking.
Specifications:
Materials: Aluminum/stainless steel hardware
Finish: Hard anodized
Length: 6.0 in. (15 cm)
Width: 1.550 in. (39.5 mm)
Thickness: 0.600 inches (15.25 mm)
Weight: .88 lbs (.40 kg)
Breach block: for 0.125 in. (3.2 mm) Nonel line
NSN: 1375-99-256-6901
N-CAGE: 3751