Dismounted EOD & IEDD Operator Kit - Kirintec · DISMOUNTED EOD & IEDD OPERATOR KIT Understanding...
Transcript of Dismounted EOD & IEDD Operator Kit - Kirintec · DISMOUNTED EOD & IEDD OPERATOR KIT Understanding...
Dismounted EOD & IEDD Operator Kit
KT-964-005
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.02 03
Page 04 Lightweight Firing
Cable
CONTENTS
Page 04 Lightscale Rigging Line
Photographs are not to scale
Page 06 Light Scale Rigging Kit
Page 07 Grappling Hook
Page 08 Korona Non-Explosive
Wire Cutter Kit
Page 9 Lightweight
A-Frame
Page 10 Metal Detector
Page 11 Cutting Hook
Page 11Mini Tactical
Binoculars
Page 12Basic EOD Tools
Page 12Forensic Kit
Page 13 Tactical Gloves
Page 13 EOD Bergan &
Pouch Set
Page 14Ceramic
Cutting Knife
EXTRAS
Page 15 Optional Extras
Page 05 Manual Initiator
Page 10 Pocket Search
Mirror
KT-964-005 is packed in a Bergan, ready to be used by an EOD/IEDD operator.
1. 110m lightweight firing cable
2. Lightscale pulling line 110m
3. Kirintec manual initiator*
4. Lightscale rigging kit
5. Grappling hooks, (flat packed) x 2
6. Korona command wire cutter, comes with 1 x metal and 1 x ceramic cutting blade
7. Lightweight A-frame complete with carriage pouch
8. Metal detector. Finished in non-reflective and colour with graduation scale markings*
9. Pocket search mirror*
10. Cutting hook
11. Mini tactical binoculars
12. Basic EOD tools:
• Needle point and flat head pliers
• Medium snips
• 2 x flat and 2 x Phillips screwdrivers (2 sizes)
• Heavy duty tape (large roll)
• Door wedges x 2
• Adjustable bungee cord x 2
• Small hammer
• Pitons
13. Forensic items:
• Digital camera*
• Nitrile gloves x 100 pairs
• Anti-static bags
• Evidence bags bar coded
KIT LIST
• Plastic sample containers x 2
• Forensic over boots x 5 pairs
• Scalpels x 1 box
• Sharps box
• Plastic tweezers x 5
• Forensic photo scale
• Forensic photo rule
• Forensic face mask x 5
• Bollé safety goggles x 1
• Small hammer
• Various pitons
14. EOD Bergan and pouch
15. Tactical gloves
16. Cutting tools
*Batteries are required for these items
Dismounted Explosive Ordnance Disposal (EOD) & Improvised Explosive Device Disposal (IEDD) Operator Kit
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
[email protected] 04 05
Part No Description
KT-600-111 110m (120yds) Lightweight reusable firing cable on winding reel
KT-600-112 110m (120yds) Lightweight reusable firing cable on winding reel with self fit terminal plugs
KT-200-398 Heavy duty pulling line 2mm diameter x 110m (120 yards) on winding reel with karabiner
LIGHTSCALE RIGGING LINEUltra strong solution
Line: 2mm (0.078”) diameter x 110m (120 yds)
Load: 535kg (1,200lbs)
Stretch: 2.2% at 50% of breaking load
Karabiner: 5 x 50mm (0.2 x 1.9”)
Diameter: 14cm (5.5”)
Width including handle: 18cm (7”)
Total weight: 800g (1.7lbs)
Colour: Blue
Features
• Heavy duty ultra strong low stretch tactical pulling line • 2mm diameter heavy duty line on 110m reusable reel • Non-absorbent, it allows the line to float in water.
MANUALINITIATORClever solution with a rugged enclosure
Our manual initiator is powered by an easily sourced 9V battery (not included), to initiate electrical matches and detonators.
It can also test for continuity with a vibration and LED response, ensuring safety even in direct sunlight or noisy environments.
Part No Description
KT-962-005 Hand held single channel Initiator - Black
Specifications
Specifications
• 320 VDC @ 10 Joules (minimum) firing energy
• Max output 340 VDC at 13 Joules
• Capable of firing 75 electrical igniters connected via 3,000ft of two-conductor 18 gauge. Copper firing line (tested through 340 ohms)
• Uses standard 9V battery (not included)
• Operating temperature range -20ºC to +55ºC
• Dimensions 9 x 17 x 3cm (3.5 x 6.7 x 1.1”)
• Weight with battery 270g (9.5oz)
• Battery weight 44g (1.5oz)
• IP 51 compliant
Fully compatible with Kirintec KT-600-111 lightweight reusable firing cable.
Safety Features Include• Abort with auto-discharge
• Internal shunt
• Boot-protected switches
• Touch-proof output terminals
LIGHTWEIGHT FIRING CABLE110 metres with reel
Construction: Tin plated copper with two cores uniformly twisted together and no less than sixty complete twists per meter (2.7mm nominal diameter).
Voltage rating: 600V AC
Current rating: 10A
Insulation: ETFE
Resistance: 33.6 ohms/km at 20ºC Cable breaking strength 12-14kg (26-30lbs) before continuity is lost
DEF STAN: 61-12 (Part 29)
Diameter: 14cm (5.5”)
Width including handle: 18cm (7”)
Weight: 1.9kg (4.2lbs)
Specifications
61.5mm Insulated 4mm black and red self fit terminal plugs (Optional extra supplied in a box)
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
[email protected] 06 07
LIGHTSCALE RIGGING KITAll items neatly packed as part of complete kit
Key Part No Spares NSN
A KT-200-608 50m (55 yards) of 2mm line on reel with karabiner x 2
4020-99-690-7739
B KT-200-628 Sacrificial lines in two pouches, 20m of 2mm line in each x 2
4020-99-837-0427
C KT-200-610 Mini locking grip wrench with loop
5120-99-667-8289
D KT-200-611 Straight forceps 150mm 5120-99-213-5951
E KT-200-631 Straight forceps 200mm 5120-99-459-1743
F KT-200-629 Large flat hook 5340-99-936-3750
G KT-200-630 Small flat hook 5340-99-162-4779
H KT-200-621 Karabiner 16mm screwgate x 2
5340-99-374-7525
I KT-200-622 Karabiner 25mm screwgate x 2
5340-99-737-2700
J KT-200-623 EOD ceramic knife 1385-99-151-5443
K KT-200-626 EOD DET multi-to ol 5110-99-229-5124
L KT-200-636 LED hand torch
M KT-200-632 K-Grip 5120-99-455-9708
N KT-200-633 K-Block mini pulleys x 2 3940-99-551-9956
O KT-200-634 Snap loops x 2 4020-99-471-5667
P KT-213-629 60mm 3 part Flat grappling hook large
Q KT-213-630 30mm 3 part Flat grappling hook small
Features
Designed for tactical search operations, this is a strong lightweight grappling hook that fits existing hook and line kits for:
• Additional pulling• Lifting • Manipulating.
The hook comes in three flat pieces and is assembled in seconds to form a four-barbed hook. The heads of the barbs interlock through a top slit.
The pieces are kept securely together at the base of the hook by using either a karabiner, or by tying the throwing line directly through the bottom hole.
Specifications
Dimensions: 195 x 150mm (7.6 x 6”) when assembled
Weight: 283g (10oz)
Construction: Black anodised stainless steel
GRAPPLING HOOKFlat pack in three easy to assemble parts
ASSEMBLE IN SECONDS
A
P1P2
P3
Q1
Q2Q3
B
C
D EF
I
J KLMN
O
G
H
Part No Description NSN
KT-212-421 Flat Pack Grappling Hook 1385-99-512-2206
You can also buy the Lightscale Rigging Kit separately. Order using part number: KT-200-547
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.
Complete Kit
KORONA COMMAND WIRE CUTTER KITNon-explosive with dual safety function
Part No Description NSN
KT-600-300 KORONA non-explosive command wire cutter kit
1385-99-979-8746
Features
• Manual spring-wound firing mechanism
• Trigger weight of 786g (28oz)
• Near silent operation
• Ceramic blades cut a 14mm section out of the wire, preventing any possible short-circuit activating the IED
• Remaining wire is released
• Steel blade included for training
• Cuts multi-stranded copper core wire up to 7mm diameter
Specifications
Weight: Full kit: 1.1Kg (2.4lbs) Cutter only: 553g (19.5oz)
Dimensions: Armed 270mm (10.6”) long Unarmed 220mm (8.6”) long Diameter 40mm (1.6”)
Construction: Non-conductive, chemical-resistant casing and ceramic blades
Colour: Black
• Blades rotate to offer multiple fresh cutting edges
• Blades are easily replaced in minutes
• Non-conductive chemical-resistant mechanism and housing
• Sealed mechanism to prevent ingress of sand and dust
• Double safety mechanism to prevent misfire
• Tether points to anchor cutter and prevent pull back of wire when blades slice through the wire.
Operation
1. At stand-off distance, the wire cutter spring is wound to its maximum, where the trigger safety is applied
2. The operator places the cutter near to the command wire, bracing its position with tethered lines
3. The trigger line is attached with a snap hook or carabiner
4. The wire is eased into open cutting slot and trapped in place by the sprung cover
5. Safety is released
6. The operator retreats to stand-off and pulls line to fire ceramic blades.
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
[email protected] 08 09
LIGHTWEIGHTA-FRAMEWith telescopic legs and includes two anchor pegs
Part No Description NSN
KT-200-543 Lightweight A-Frame 3950-99-179-5484
Features
• Lifting capacity of 110kg (242 lbs) with a 2mm diameter rigging line
• Constructed principally of carbon fiber and anodised aluminium
• Weighs less than 2kg
• Detachable leg for added stability on uneven ground or if a tether point is not available
• Telescopic legs which can be locked in three positions:
1. vertical 2. semi-spread 3. fully spread
• Feet have steel points or rubber grips to assist with stability
• Legs may be tethered using metal or plastic anchor pegs depending on ground conditions.
Suggested applications
• Charge extraction
• Vehicle clearance
• High risk search situations
Specifications
Length: 620mm (24.5”)
Width: 120mm (4.7” diameter)
Weight: 1.8kg (4lbs)
Mid leg span: 1,000mm (39”)
Max leg span: 1,700mm (67”)
Min leg length: 620mm (24.5”)
Mid leg length: 860mm (34”)
Max leg length: 1,100mm (43”)
Max weight lift: 110kg (242lbs)
*Anchor Pegs Included
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.
METAL DETECTORHandheld search tool
Features
• Ideal for person search as part of counter Improvised Explosive Device (C-IED) operations such as target confirmation
• Powered by a standard 9 volt PP3 battery giving approx 40hrs use
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
[email protected] 10 11
*Also in black
Part No Description NSN
KT-300-347 Metal Detector 3950-99-179-5484
POCKET SEARCH MIRRORA lightweight telescopic search mirror
Features
• Folds flat into pocket sized format
• Angled head to search under cars, overhead lockers or awkward building recesses
• Illumintaed with a LED pen torch
• Clip to attach discreetly on a jacket
Part No Description
KT-212-776 Pocket Search Mirror
Specifications
Weight: 320g (11.2oz) including batteries
Dimensions closed: 155 x 80 x 20mm (8 x 3.2 x 7/8”)
Extended: 600mm (24)
Power: 2 x AAA alkaline batteries
*Batteries not included
CUTTING HOOKCeramic and metal blades
Part No Description NSN
KT-212-221 Ceramic cutting hook includes protective pouch 1385-99-216-1313
KT-221-821 Replacement ceramic blade for cutting hook 1385-99-190-7659
Features
Our small Kirintec ceramic cutting hook is light and comes with a carrying pouch which conveniently attaches to a belt or a Molle strap. It has ergonomic grip for hand cutting actions and is fitted with a consumable ceramic blade.
Specifications
Dimensions: 140mm x 85mm
(5.5 x 3.3”)
Weight: 5.2g (0.18oz)
Blade: Ceramic
MINI TACTICAL BINOCULARSFor remote observation of targets
Features
Lightweight, ruggadised binoculars for military and soldier use with high magnification.
• 115mm (4.5”) wide
• 70mm (2.7”) long
Part No Description
KT-962-019 Mini tactical binoculars
Specifications
Height: 7cm (2.7”)
Nominal weight: 380g (13.4oz)
Magnification: 10 x 25
Specifications
Weight: including battery 320g (0.7lbs)
Dimensions: 34cm (13.4”) long x 35cm (13.72) wide x 4cm (1.5”) high
Power: 2 x AAA alkaline batteries
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.
BASIC EOD TOOLSEssentials
Contents
• Needle point and flat head pliers• Medium snips• 2 flat and 2 phillips screwdrivers
(2 sizes)• Heavy duty large roll of tape• Door wedges x 2• Adjustable bungee cord x 2• Small hammer• Pitons
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
[email protected] 12 13
Part No Description
KT-964-016 Forensic kit
KT-964-006 Basic EOD tools
Representative: please ask if you require other tools
FORENSIC KITFirst assessment for EOD operators
Contents
• Digital Camera
• Nitrile gloves x 100 pairs
• Anti-static bags
• Evidence bags bar coded
• Sample containers plastic x 2
• Forensic over boots x 5 pairs
• Scalpels x 1 box
• Sharps box
• Plastic tweezers x 5
• Forensic photo scale
• Forensic photo rule
• Forensic face mask x 5
• Bollé safety goggles x 1
• Small hammer
• Pitons various
This picture is for illustrative purposes, the forensic items will be packed within the Bergan and not contained within the black tool box shown above. A separate box version is available as a stand alone item.
TACTICAL GLOVESProtects hands
EOD BERGAN & POUCH SETMolle or leg strap
When ordering choose from either of these two compatibility styles:
• Molle
• Or smaller Light Scale Rigging Kit (LSRK) pouch - to be leg strapped.
Comes in black as standard kit bag. Ask if you would like tan or Multi Terrain Pattern (MTP).
These gloves are comfortable. With activity in mind, you can perform the Explosive Ordnance Disposal (EOD)/Improvised Explosive Device Disposal (IEDD) tasks you would expect, with maxiumum dexterity.
INCLUDES INTERNAL STORAGE POUCHES
Example image
Part No Description
KT-962-020 Tactical gloves
Specifications
Total kit weight: 13.5kg (30lb)
Height: 140cm (15.7”)
Width: 40cm (15.7”)
Depth: 25cm (9.8”)
Part No Description
KT-962-021 EOD Bergan & Pouch Set - Molle
KT-962-035 EOD Bergan & Pouch Set - LSRK Pouch
Features
• Thermal plastic rubber strap (hook and line type)
• Durable synthetic leather palm
• Machine washable
• Large size as standard
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.
CERAMIC CUTTING KNIFECeramic 9mm retractable cutter
1. 110m lightweight firing cable
2. Lightscale pulling line 110m
3. Kirintec manual initiator*
4. Lightscale rigging kit
5. Grappling hooks, (flat packed) x 2
6. Korona command wire cutter, comes with 1 x metal and 1 x ceramic cutting blade
7. Lightweight A-frame complete with carriage pouch
8. Metal detector. Finished in non-reflective and colour with graduation scale markings*
9. Pocket search mirror*
10. Cutting hook
11. Mini tactical binoculars
12. Basic EOD tools:
• Needle point and flat head pliers
• Medium snips
• 2 x flat and 2 x Phillips screwdrivers (2 sizes)
• Heavy duty tape (large roll)
• Door wedges x 2
• Adjustable bungee cord x 2
• Small hammer
• Pitons
13. Forensic items:
• Digital camera*
• Nitrile gloves x 100 pairs
• Anti-static bags
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351
[email protected] 14 15
Features
• These blades will fit any commonly used 9mm retractable blade handle
• No metallic components in this holder.
• Weight: 10g (0.2lbs)
• Length: 130mm
CONTENTS LIST
• Evidence bags bar coded
• Plastic sample containers x 2
• Forensic over boots x 5 pairs
• Scalpels x 1 box
• Sharps box
• Plastic tweezers x 5
• Forensic photo scale
• Forensic photo rule
• Forensic face mask x 5
• Bollé safety goggles x 1
• Small hammer
• Various pitons
14. EOD Bergan and pouch
15. Tactical gloves
16. Cutting tools
*Batteries are required for these items
Colours may vary at time of supply
Part No Description
KT-962-017 Ceramic cutting knife
KT-964-005
Part No Description NSN
KT-200-516 Multi-role disrupter kit 1385-99-471-6683
KT-200-519 Flying ceramic knife* 1385-99-152-8624
KT-200-507 Flying spike* 1385-99-975-1918
KT-200-520 Flying ceramic window breaker* 1385-99-840-3820
KT-399-733 90 Disrupter cartridges 1385-99-153-2869
OPTIONAL EXTRASSabre multi-role disrupter, projectiles and cartridges
The Sabre multi-role disrupter is a very small lightweight and yet very powerful reusable disrupter for use in a wide variety of roles.
The unit is principally constructed from titanium to maintain maximum strength, while minimising weight and size, this makes it ideal for lightweight and Special Forces type applications.
Projectiles*
The Sabre disrupter uses standard electrically initiated 1.4C explosive cartridges, these are supplied separately.
Features
• Titanium body, corrosion resistant articulating arm and stand
• Powerful multi-shot device with minimum recoil
• Accessories for tactical deployments: disrupting, cutting, breaking and attaching
• Deploys on a lightweight stand with excellent stand-off capability
• Custom ROV mounts available on request
• Ideal for assault IEDD, Special Forces and SWAT teams
The kit contents come in a soft pouch holding the disrupter, stand, articulating arm, cleaning tools and cartridges.
Disrupter cartridges
Available with piston and closure cap on separately.
Classification
• Power device 1.4C, UN0276 and packing group 134
• Net Explosive Quantity (NEQ) per box of 90 is 0.060kg (0.3lbs)
Contents
MANUFACTURERS LIABILITYThe nature and precise outcome of EOD, including IEDD opera tions, cannot be predicted and it is essential that all users are con fident and fully competent in the correct methods and procedures. Whilst every effort has been made to ensure that all items of the Hook and line equipment meet the highest standards of quality and safety, KIRINTEC LTD assumes no liability for any injuries to personnel or damage to property arising from the use of the equipment. CONTINUAL PRODUCT IMPROVEMENTDue to continual product development and improvement descrip tions and specifications are subject to change without prior notifica tion.
*Minimum order of 10
DISMOUNTED EOD & IEDD OPERATOR KITUnderstanding the threat, ADVANCING the response.
Kirintec UKWalter Scott House 10 Old Gloucester RoadRoss-on-Wye HR9 5PB
T: +44 (0) 1989 568 350F: +44 (0) 1989 568 [email protected]
Kirintec Inc. USA500 Mongomery Street Suite 400 AlexandriaVA 22314
Kirintec International UAEUnit No: AG-PF-32, AG Tower Plot No: JLT-PH1-I1A, Jumeirah Lakes Towers, Dubai
SP
RIN
G 2
018