Short Form Catalogue valid as of January 1, 2015Short Form Catalogue Safety Equipment Valid as of...

www.dehn-international.com

Safety EquipmentShort Form Catalogue valid as of January 1, 2015

New Products

Ice Removal Rod

• Ice removal rod for removing icicles in the vicinity of live parts e.g. outdoor overhead contact lines or tunnel systems • Massive ice removal hammer made of insulating material• Insulating stick for 15 kV / 16.7 Hz and 25 kV / 50 Hz systems• With telescopic handle up to a total length of 3420 mm to 5270 mm

Page 12

Earthing and Short-Circuiting Devices for Railway Applications with Aluminium Cable

• For earthing and short-circuiting electrical installations at the work location• Weight-reduced • Lower risk of theft compared to copper cables

Page 60

Arc-Fault-Tested Protective Gloves with long Gauntlet

• Good touch sensitivity due to soft leather glove palm• Breathable materials maximise wearing comfort• Protection when removing NH fuse links• Enhanced arc fault protection up to the crook of the arm• Easy to put on

Page 97

• Mobile measuring system for periodic technical tests of portable earthing and short-circuiting devices (EaS)• For determining minimum ohmic resistances of earthing and short-circuiting devices and the quality of electrical connections e.g. in case

of conductor rails or switch contacts• Electronic transfer of measured values to the evaluation software via USB interface• Software-aided procedure and automatic documentation of results• Acoustic signal as soon as the limit values are exceeded• Calibrated when delivered• Software update via USB interface

Page 109

Fixed Arc Fault Protection System DEHNshort

• Arc fault protection system DEHNshort for detecting and extinguishing arc faults• Modular system consisting of a detection device and short-circuiter unit• Low space requirements thanks to compact design• Easy installation and commissioning•

Page 101

Contents

Short Form Catalogue Safety EquipmentValid as of January 1, 2015 This Catalogue replaces the Safety Equipment Short Form Catalogue published in 2014. We reserve the right to introduce changes in

approval of DEHN + SÖHNE.

Notes 150Templates 151Easy Choice 156General Terms of Sale 159Key Words 160

®

Further Equipment

Measuring Devices 109

Discharge devices 115

2 Valid as of January 1, 2015

DEHN protects.

Valid as of January 1, 2015 3

DEHN – worldwide

DEHN + SÖHNE GmbH + Co.KG.

BelgiumBelizeBolivia

BrazilBruneiBulgariaBurundiCambodiaCameroonCanadaCape Verde

ChadChileColombiaComoros

CroatiaDemocratic

the Congo

EcuadorEl Salvador

Equatorial Guinea

FinlandGabonGambiaGreeceGuatemalaGuinea

Honduras

JapanJordanKenyaKorea

MalaysiaMaliMauritiusMacedoniaMozambiqueMyanmarNamibia

NicaraguaNetherlandsNigerNigeriaNorthern

Oman

Qatar

Congo

SenegalSerbiaSeychelles

Singapore

Slovenia

St. Helena

SyriaTanzaniaThailandTogoUganda

EmiratesVenezuelaVietnamYemen

Sales activities in more than 70 countries worldwide

Australia:

Austria:

China:

Czech Republic:

Denmark:

France:

Great Britain:

Hungary:

India:

Italy:

Mexico:

Poland:

Russia:

Singapore:

South Africa:

Spain:

Switzerland:

Turkey:

USA:

InternationalSales Department

[email protected]

International TechnicalServices & Support


DEHN – Information

1. VDE standards for safety equipment and devices

DIN VDE 0680

DIN VDE 0681

“Voltage detectors to be used for over head contact

DIN VDE 0682

DIN VDE 0683

1.1 Further reference:

2. Abbreviations

2.1 Materials

Abbreviation MaterialAlAlMgSiCu Electric copper, copperMs BrassStSt Stainless steelSt SteelMCI Malleable cast ironZDCGRP

2.2 Coating materials

Abbreviation Coating materialgal Sngal Zn GalvanisedtZnBronte gal Sn

2.3 Types of conductors

Abbreviation Type of conductorFl Flat conductor

Valid as of January 1, 2015 5

DEHN – Information

3. Minimum lengths of insulating elements for

Nominal voltage

Rated voltage

Minimum length of the insulating element L I min

UN Ur

500 mm 520 mm 525 mm500 mm 520 mm 525 mm525 mm 520 mm 525 mm

—900 mm —

——

2400 mm ——

above, a rated voltage closest to the required nominal voltage must be selected.

4. Application

Symbol ApplicationNot suitable for use in wet weather conditionsFor indoor and outdoor installations

conditions.

Suitable for use in wet weather conditionsFor indoor and outdoor installations

For indoor installations only!

Switchgear installations

Overhead lines

Components for railway applications

Installation instructions, see www.dehn-international.com

Search products / More

+ New products

EaS Configurator:

www.dehn.de/en/euksee www.dehn-international.com

5. Maintenance tests

2021

Wiederholungsp

rüfung

Nächste

Maintenance test criteria for protective and auxiliary equipmentDGUV regulation 3 (previously BGV A3) VDE 0105-100 Equipment standard

Earthing and short-circuiting devices

tions, general informa

Voltage detectors, phase comparators and voltage detecting systems

before and, if possible,

Operating and earthing sticks

defects must be carried out prior to each tions, general informa

cal tests. DEHN + SÖHNE recommends to use the test intervals of voltage detectors.


Work according to the 5 Safety Rules

Five safety rules:

1. Disconnect completely

The electrical installation must be disconnected from live parts on all poles.

2. Secure against re-connection

3. Verify that the installation is dead

used to verify on all poles that the installation is dead.

4. Carry out earthing and short-circuiting

5. Provide protection against adjacent live parts

parts.

Valid as of January 1, 2015 www.dehn-international.com 7

1. Disconnect completely – Operating Sticks

1. O

pera

ting

Sti

cks


Work according to the 5 Safety Rules

766 323 SCSS 36 STK 30766 324 SCSSN 36 STK 30

766 323 4013364125865 5-2-0 5.8 kg 1 pc(s)766 324 4013364137004 5-2-0 4.5 kg 1 pc(s)

Type SCSS 36 STK 30 SCSSN 36 STK 30Part No. 766 323 766 324Nominal voltage (UN)Max. total length (IG max)ForPU

Switching Stick Kit (Ø30 mm)

766 325 ASS 36 STK 30766 326 ASSN 36 STK 30

766 325 4013364125872 5-2-1 5.6 kg 1 pc(s)766 326 4013364137011 5-2-1 4.3 kg 1 pc(s)

Type ASS 36 STK 30 ASSN 36 STK 30Part No. 766 325 766 326Nominal voltage (UN)Max. total length (IG max)ForPU

Operating Stick Kit (Ø30 mm)

766 452 ASS 36 STK 30 43766 453 ASSN 36 STK 43

766 452 4013364125896 5-2-1 6.6 kg 1 pc(s)766 453 4013364137035 5-2-1 5.3 kg 1 pc(s)

Type ASS 36 STK 30 43 ASSN 36 STK 43Part No. 766 452 766 453Nominal voltage (UN)Max. total length (IG max)ForPU

Operating Stick Kit (Ø43 mm)

1 4

4

5

9

9

9

14 5

2

1

24 6

7

Parts list:Pos. Part No. Pos. Part No.1 766 164 6 766 463

2 766 365 6 766 468

3 766 465 7 766 4564 766 356 8 766 466

5 766 363 9 766 996

5 766 367

For more detailed information on these products,

see Accessories chapter.

For hot stick working when switching and providing protection against adjacent live equipment, for attaching earthing and short-circuiting devices to equipment tested for safe isolation from supply voltage in accordance with EN 50110 (DIN VDE 0105-100).• For indoor and outdoor use• For nominal voltages up to 36 kV• Easy transport due to anti-rotation plastic plug-in coupling• For use as switching, operating or earthing stick• Delivered in a storage bag

IS STK Insulating Stick Kit2021

Wiederholungsp

rüfung

Nächste

Possible lengths:Length lG Pos. No.3420 mm 1+4+4+52590 mm 1+4+51760 mm 1+5

Permissible loads for the insulating stick kit:

Length lG Pos. No. Max. load on the op-erating head

2590 mm 1+4+5 5 kg2390 mm 2+4+5 5 kg1760 mm 1+5 12 kg1560 mm 2+5 12 kg



3420 mm 1+4+6+7 9 kg3220 mm 2+4+6+7 9 kg2590 mm 1+4+6 9 kg2390 mm 2+4+6 9 kg1760 mm 1+6 25 kg1560 mm 2+6 35 kg

8 www.dehn-international.com Valid as of January 1, 2015

1. Disconnect completely – Operating Sticks1.

Ope

rati

ng S

tick

s

766 450 ESS STK 43766 451 ESSN STK 43

766 450 4013364125889 5-4-2 7.6 kg 1 pc(s)766 451 4013364137028 5-4-2 6.2 kg 1 pc(s)

Type ESS STK 43 ESSN STK 43Part No. 766 450 766 451Max. total length (IG max)ForPU

Earthing Stick Kit (Ø43 mm)

766 364 AK 36 SK STK 330

766 364 4013364128262 5-2-1 240 g 1 pc(s)

Type AK 36 SK STK 330Part No. 766 364DiameterTotal length (lG)PU

Accessories for IS STK Insulating Stick Kit

Operating Head with plug-in Coupling, hexagon ShaftFor indoor use

9

2

3 68

8

766 001 IS 36 SK 1000766 002 IS 36 SK 1500766 210 ISN 36 SK 1000766 215 ISN 36 SK 1500

766 001 4013364017825 5-2-1 416 g 1 pc(s)766 002 4013364017832 5-2-1 810 g 1 pc(s)766 210 4013364137257 5-2-1 480 g 1 pc(s)766 215 4013364137264 5-2-1 640 g 1 pc(s)

Type IS 36 SK 1000 IS 36 SK 1500 ISN 36 SK 1000 ISN 36 SK 1500Part No. 766 001 766 002 766 210 766 215Nominal voltage (UN)Total length (lG)ForPU

Insulating Stick, hexagon ShaftOperating head with spring locking mechanism and M12 threaded bushing• Can be used as switching and operating stick by attaching a SSK M12 switching stick head• Can be used as earthing stick• Handle sealed with end cap

766 311 IS 36 SQ 1000766 315 IS 36 SQ 1500766 211 ISN 36 SQ 1000766 216 ISN 36 SQ 1500


Type IS 36 SQ 1000 IS 36 SQ 1500 ISN 36 SQ 1000 ISN 36 SQ 1500Part No. 766 311 766 315 766 211 766 216Nominal voltage (UN)Max. load on the operating head *)

Total length (lG)ForPU

Insulating Stick, T Pin ShaftOperating head with spring-loaded bayonet coupling • Can be used as switching and operating stick by attaching a SSK SQ switching stick head• Can be used as operating stick for inserting insulating protective shutters• Can be used as earthing stick• Handle sealed with end cap

*) Max. shutter weight when inserting insulating protective shutters

For hot stick working when switching and providing protection against adjacent live equipment, for attaching earthing and short-circuiting devices to equipment tested for safe isolation from supply voltage in accordance with EN 50110 (DIN VDE 0105-100).• Insulating stick in accordance with E DIN VDE V 0681-1• Earthing stick based on DIN VDE 0683-100• For indoor and outdoor use• For nominal voltages up to 123 kV• For use as switching, operating and earthing stick• Handle sealed with end cap or plastic plug-in coupling for extending the handle

IS Insulating Sticks2021

Wiederholungsp

rüfung

Nächste



3960 mm 2/3+6+8+8 8 kg2760 mm 2/3+6+8 14 kg1560 mm 2/3+6 35 kg



1. O

pera

ting

Sti

cks

766 100 IS 36 SK STK 1000766 122 IS 123 SK STK 2000766 111 ISN 36 SK STK 1000

766 100 4013364125117 5-2-1 400 g 1 pc(s)766 122 4013364134249 5-2-1 800 g 1 pc(s)766 111 4013364137295 5-2-1 560 g 1 pc(s)

Type IS 36 SK STK 1000 IS 123 SK STK 2000 ISN 36 SK STK 1000Part No. 766 100 766 122 766 111Nominal voltage (UN)Total length (lG)ForPU

Insulating Stick, hexagon Shaft, plug-in CouplingOperating head with spring locking mechanism and M12 threaded bushing• Can be used as switching and operating stick by attaching a SSK M12 switching stick head• Can be used as earthing stick • Handle sealed with plastic plug-in coupling for extending the handle

766 301 IS 36 SQ STK 1000766 322 IS 123 SQ STK 2000766 310 ISN 36 SQ STK 1000

766 301 4013364125124 5-2-1 400 g 1 pc(s)766 322 4013364134256 5-2-1 800 g 1 pc(s)766 310 4013364137318 5-2-1 560 g 1 pc(s)

Type IS 36 SQ STK 1000 IS 123 SQ STK 2000 ISN 36 SQ STK 1000Part No. 766 301 766 322 766 310Nominal voltage (UN)Max. load on the operating head *)

Total length (lG)ForPU

Insulating Stick, T Pin Shaft, plug-in CouplingOperating head with spring-loaded bayonet coupling• Can be used as switching and operating stick by attaching a SSK SQ switching stick head• Can be used as operating stick for inserting insulating protective shutters• Can be used as earthing stick • Handle sealed with plastic plug-in coupling for extending the handle

*) Max. shutter weight when inserting insulating protective shutters

766 222 ISN 123 SK STK 2500

766 222 4013364137301 5-2-1 2.36 kg 1 pc(s)

Type ISN 123 SK STK 2500Part No. 766 222Nominal voltage (UN)Total length (lG)ForPU

Insulating Stick, detachable, hexagon Shaft, plug-in CouplingWith M12 thread, spring locking mechanism and plug-in coupling for extending the handle• Can be used as switching stick by attaching a switching stick head (Part No. 765 005)• Can be used as earthing stick

766 332 ISN 123 SQ STK 2500

766 332 4013364137325 5-2-1 2.38 kg 1 pc(s)

Type ISN 123 SQ STK 2500Part No. 766 332Nominal voltage (UN)Total length (lG)ForPU

Insulating Stick, detachable, T Pin Shaft, plug-in CouplingBayonet locking mechanism and plug-in coupling for extending the handle • Can be used as switching stick by attaching a switching stick head (Part No. 765 009) • Can be used as earthing stick• Can be used as operating stick for inserting insulating protective shutters



Ope

rati

ng S

tick

s

765 005 SSK M12

765 005 4013364051775 5-2-0 116.7 g 1 pc(s)

Type SSK M12Part No. 765 005MaterialPU

Accessories for IS Insulating Sticks

Screw-on Switching Stick Head for IS SK Insulating SticksWith M12 thread.In accordance with E DIN VDE V 0681-2.

765 009 SSK SQ

765 009 4013364051782 5-2-0 145 g 1 pc(s)

Type SSK SQPart No. 765 009MaterialPU

Switching Stick Head for IS SQ Insulating SticksWith T pin shaft (bayonet locking mechanism).In accordance with E DIN VDE V 0681-2.T pin shaft in accordance with DIN 48087.

763 100 SCS 36 STK 1000763 150 SCS 72 STK 1500763 180 SCS 123 STK 2000763 111 SCSN 36 STK 1000


Type SCS 36 STK 1000 SCS 72 STK 1500 SCS 123 STK 2000 SCSN 36 STK 1000Part No. 763 100 763 150 763 180 763 111Nominal voltage (UN)Max. load on the operating head — —Total length (lG)ForPU

Nominal Voltages up to 123 kVHandle sealed with plastic plug-in coupling for extending the handle.

For hot stick working when switching and providing protection against adjacent live equipment in accordance with EN 50110 (DIN VDE 0105-100).• Insulating stick in accordance with DIN VDE 0681-1• Switching stick head in accordance with DIN VDE 0681-2• For indoor and outdoor use• For use as operating stick for inserting insulating protective shutters • Handle sealed with end cap or plastic plug-in coupling for extending the handle

SCS Switching Sticks2021

Wiederholungsp

rüfung

Nächste

763 610 SCS 36 1000763 611 SCS 36 1500763 612 SCS 36 2000763 615 SCS 72 1500763 620 SCS 72 2000763 510 SCSN 36 1000763 511 SCSN 36 1500763 512 SCSN 36 2000

763 610 4013364003286 5-2-0 962 g 1 pc(s)763 611 4013364076921 5-2-0 610 g 1 pc(s)763 612 4013364078635 5-2-0 800 g 1 pc(s)763 615 4013364003309 5-2-0 1.42 kg 1 pc(s)763 620 4013364003316 5-2-0 800 g 1 pc(s)763 510 4013364137172 5-2-0 520 g 1 pc(s)763 511 4013364137189 5-2-0 660 g 1 pc(s)763 512 4013364137196 5-2-0 820 g 1 pc(s)

Type SCS 36 1000 SCS 36 1500 SCS 36 2000 SCS 72 1500Part No. 763 610 763 611 763 612 763 615Nominal voltage (UN)Max. load on the operating head —Total length (lG)ForPU

Nominal Voltages up to 72.5 kVWith end cap.

Type SCS 72 2000 SCSN 36 1000 SCSN 36 1500 SCSN 36 2000Part No. 763 620 763 510 763 511 763 512Nominal voltage (UN)Max. load on the operating head —Total length (lG)ForPU



1. O

pera

ting

Sti

cks

763 181 SCSN 123 STK 2800

763 181 4013364137240 5-2-0 2.54 kg 1 pc(s)

Type SCSN 123 STK 2800Part No. 763 181Nominal voltage (UN)Total length (lG)ForPU

Nominal Voltages up to 123 kV, detachableHandle sealed with plastic plug-in coupling for extending the handle.

765 040 SZ HH 1060765 041 SZ HH 1250765 042 SZ HH 1500

765 040 4013364093751 5-2-2 2.13 kg 1 pc(s)765 041 4013364093768 5-2-2 2.28 kg 1 pc(s)765 042 4013364093775 5-2-2 2.59 kg 1 pc(s)

Type SZ HH ... 1060 1250 1500Part No. 765 040 765 041 765 042Nominal voltage (UN)Total length (lG)PU

Straight SZ Fuse Tong

765 050 SZ HH W20 1070765 051 SZ HH W20 1250765 052 SZ HH W20 1500


Type SZ HH ... W20 1070 W20 1250 W20 1500Part No. 765 050 765 051 765 052Nominal voltage (UN)Total length (lG)PU

20° angled SZ Fuse Tong

700 005 HV 3HH ET

700 005 4013364004160 5-3-4 706.9 g 1 pc(s)

Type HV 3HH ETPart No. 700 005ForPU

Accessories for SZ Fuse Tongs

Storage Devices for HH FusesWall-mounted.

700 004 HV 3HH SZ ET

700 004 4013364004153 5-3-4 1 kg 1 pc(s)

Type HV 3HH SZ ETPart No. 700 004For PU

Storage Devices for HH Fuses and Fuse TongWall-mounted.

700 015 HV 3HH700 014 HV 3HH SZ

700 015 4013364007192 5-3-4 1.41 kg 1 pc(s)700 014 4013364007208 5-3-4 1.71 kg 1 pc(s)

Type HV 3HH HV 3HH SZPart No. 700 015 700 014Consisting ofPU

Storage Device Kit for HH Fuses or HH Fuses and Fuse TongWall-mounted.

For hot stick working when removing HH fuses from live equipment in accordance with EN 50110 (DIN VDE 0105-100).• Insulating stick in accordance with DIN VDE 0681-1• Operating head in accordance with DIN VDE 0681-3• For inserting and removing HH fuses in indoor installations• For nominal voltages up to 36 kV• 20° angled operating head for HH fuses that are not easily accessible• Wide clamping range Ø30 ... 90 mm

SZ Fuse Tongs2021

Wiederholungsp

rüfung

Nächste



Ope

rati

ng S

tick

s

766 040 RST 36 1000766 041 RST 36 1500766 042 RST 36 2000

766 040 4013364113046 5-2-1 820 g 1 pc(s)766 041 4013364113053 5-2-1 1 kg 1 pc(s)766 042 4013364113060 5-2-1 1.12 kg 1 pc(s)

Type RST 36 ... 1000 1500 2000Part No. 766 040 766 041 766 042Nominal voltage (UN)Total length (lG)Insertion depth (IO)PU

Rescue Rod up to 36 kV

766 372 AK 25 ESH STK SN7361

766 372 4013364139916 5-2-1 1.24 kg 1 pc(s)

Type AK 25 ESH STK SN7361Part No. 766 372 +Nominal voltage (UN)Total length (lG)Dimensions (operating head)ForPU

Operating Head (Hammer)With plug-in coupling

766 371 ISN 25 STK 900SN7360

766 371 4013364139909 5-2-1 560 g 1 pc(s)

Type ISN 25 STK 900SN7360Part No. 766 371 +Nominal voltage (UN)Total length (lG)ForPU

Insulating StickWith plug-in coupling for operating head (hammer)

766 469 HVTC STK 4100 SN7359

766 469 4013364139893 5-2-1 3.42 kg 1 pc(s)

Type HVTC STK 4100 SN7359Part No. 766 469 +Total length (lG max / IG min)ForPU

Telescopic Extension Handle

For hot stick working when rescuing persons from the live working zone in close proximity to live equipment in accordance with EN 50110 (DIN VDE 0105-100).• Insulating stick in accordance with DIN VDE 0681-1• For rescuing persons from the live working zone in the event of an electrical accident• For nominal voltages up to 36 kV• Plastic rescue hook (protected against bridging)• For use in indoor and outdoor use

RST Rescue Rods2021

Wiederholungsp

rüfung

Nächste

• Ice removal rod for removing icicles in the vicinity of live parts e.g. outdoor overhead contact lines or tunnel systems • Massive ice removal hammer made of insulating material• Insulating stick for 15 kV / 16.7 Hz and 25 kV / 50 Hz systems• With telescopic handle up to a total length of 3420 mm to 5270 mm

Ice Removal Rod2021

Wiederholungsp

rüfung

Nächste


2. Secure against Re-Connection – Lock-out Systems

2. L

ock-

out

Syst

ems

785 639 SE E14785 650 SE E18785 640 SE E27 E33

785 639 4013364087019 5-8-2 15 g 10 pc(s)785 650 4013364106536 5-8-2 22 g 10 pc(s)785 640 4013364087026 5-8-2 55 g 10 pc(s)

Type SE ... E14 E18 E27 E33Part No. 785 639 785 650 785 640SizeDimensions Ø Ø ØPU

Insulating PlugFor screw inserts.

785 641 SE NH00785 642 SE NH0785 643 SE NH1785 644 SE NH2 3


Type SE ... NH00 NH0 NH1 NH2 3Part No. 785 641 785 642 785 643 785 644SizeDimensionsPU

Insulating BladeFor NH fuse holders and distribution blocks.

785 638 SE REG 1TE785 652 SE REG 2TE785 637 SE REG 3TE

785 638 4013364086920 5-8-2 6 g 10 pc(s)785 652 4013364111479 5-8-2 8.5 g 10 pc(s)785 637 4013364100701 5-8-2 14 g 10 pc(s)

Type SE ... REG 1TE REG 2TE REG 3TEPart No. 785 638 785 652 785 637SizeDimensionsPU

Lock-out SystemFor single-pole and multipole circuit breakers with a clamping range of 45 mm.

In accordance with VBG 125 and DIN 40008.• For nominal voltages up to 1000 V• For indoor installations• Protection against re-connection• Symbol “Nicht schalten“ [Do not close the circuit] acc. to German regulations (VBG 125)

Lock-out Systems

DEHN protects.

Valid as of January 1, 2015 ww.dehn-international.com 15

3. Verify that the Installation is dead – Voltage Detectors

3. V

olta

ge D

etec

tors

767 711 PHE3 3 10 S767 721 PHE3 6 20 S767 731 PHE3 10 30 S


Type PHE3 ... 3 10 S 6 20 S 10 30 SPart No. 767 711 767 721 767 731Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, M12 ThreadCategory “S“ for switchgear installations and overhead lines.

Capacitive voltage detector as a complete device in accordance with EN/IEC 61243-1 (DIN VDE 0682-411) for verifying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For indoor and outdoor use• With self-testing element• Visual and acoustic indicator• Easy transport due to detachable insulating stick (M12) and test prod• Insulating stick sealed with plug-in coupling for extending the handle• Easy battery replacement without additional tools

PHE III Voltage Detector2021

Wiederholungsp

rüfung

Nächste

767 125 PHE3 25 S 50 1P

767 125 4013364130319 5-1-1 1.26 kg 1 pc(s)

Type PHE3 ... 25 S 50 1PPart No. 767 125Nominal voltage (UN)Total length (lG)PU

Nominal Voltages up to 25 kV / 50 HzFor the overhead contact lines of electric railways.Category “S“ for single-ended monophase systems.

767 703 PHE3 3 S767 706 PHE3 6 S767 710 PHE3 10 S767 720 PHE3 20 S767 730 PHE3 30 S

767 703 4013364070899 5-1-1 1.01 kg 1 pc(s)767 706 4013364070837 5-1-1 1.01 kg 1 pc(s)767 710 4013364070851 5-1-1 1.01 kg 1 pc(s)767 720 4013364070844 5-1-1 1.07 kg 1 pc(s)767 730 4013364070813 5-1-1 1.13 kg 1 pc(s)

Type PHE3 ... 3 S 6 S 10 SPart No. 767 703 767 706 767 710Nominal voltage (UN)Total length (lG)PU

Nominal Voltages up to 30 kV / 50 Hz, M12 ThreadCategory “S“ for switchgear installations and overhead lines.

Type PHE3 ... 20 S 30 SPart No. 767 720 767 730Nominal voltage (UN)Total length (lG)PU

767 903 PHE3 3 S ZK767 906 PHE3 6 S ZK767 910 PHE3 10 S ZK767 920 PHE3 20 S ZK767 930 PHE3 30 S ZK

767 903 4013364134737 5-1-1 992 g 1 pc(s)767 906 4013364134744 5-1-1 992 g 1 pc(s)767 910 4013364134751 5-1-1 992 g 1 pc(s)767 920 4013364134768 5-1-1 1.1 kg 1 pc(s)767 930 4013364134775 5-1-1 1.17 kg 1 pc(s)

Type PHE3 ... 3 S ZK 6 S ZK 10 S ZKPart No. 767 903 767 906 767 910Nominal voltage (UN)Total length (lG)PU

Nominal Voltages up to 30 kV / 50 kV, Gear CouplingCategory “S“

Type PHE3 ... 20 S ZK 30 S ZKPart No. 767 920 767 930Nominal voltage (UN)Total length (lG)PU

Voltage detectors for other nominal voltages and frequencies available on request.


3. Verify that the Installation is dead – Voltage Detectors3.

Vol

tage

Det

ecto

rs

767 941 PHE3 3 10 S ZK767 951 PHE3 6 20 S ZK767 961 PHE3 10 30 S ZK


Type PHE3 ... 3 10 S ZK 6 20 S ZK 10 30 S ZKPart No. 767 941 767 951 767 961Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, Gear CouplingCategory “S“

767 733 PHE3 U 3 30 S

767 733 4013364070882 5-1-1 1.29 kg 1 pc(s)

Type PHE3 ... U 3 30 SPart No. 767 733Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, switchable, M12 ThreadCategory “S“ for switchgear installations and overhead lines.

767 960 PHE3 U 3 30 S ZK

767 960 4013364134812 5-1-1 1.32 kg 1 pc(s)

Type PHE3 ... U 3 30 S ZKPart No. 767 960Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, switchable, Gear CouplingCategory “S“

767 940 PHE3 6 20 SL ZK767 950 PHE3 10 30 SL ZK

767 940 4013364134829 5-1-1 1.38 kg 1 pc(s)767 950 4013364134836 5-1-1 1.44 kg 1 pc(s)

Type PHE3 ... 6 20 SL ZK 10 30 SL ZKPart No. 767 940 767 950Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, Test Set, Gear CouplingWith two test prods of category “S“ for switchgear installations and overhead lines and of category “L“ for overhead lines.

767 740 PHE3 6 20 SL767 750 PHE3 10 30 SL

767 740 4013364071063 5-1-1 1.45 kg 1 pc(s)767 750 4013364071070 5-1-1 1.51 kg 1 pc(s)

Type PHE3 ... 6 20 SL 10 30 SLPart No. 767 740 767 750Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, Test Set, M12 ThreadWith two test prods of category “S“ for switchgear installations and overhead lines and of category “L“ for overhead lines.




3. V

olta

ge D

etec

tors

767 921 PHE3 PK6 20 S SB ZK767 931 PHE3 PK10 30 S SB ZK

767 921 4013364097360 5-1-1 1.65 kg 1 pc(s)767 931 4013364097377 5-1-1 1.08 kg 1 pc(s)

Type PHE3 ... PK6 20 S SB ZK PK10 30 S SB ZKPart No. 767 921 767 931Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, Category “S“Category „S“ for switchgear installations and overhead lines.

767 922 PHE3 PK6 20 L SB ZK767 932 PHE3 PK10 30 L SB ZK

767 922 4013364097384 5-1-1 1.07 kg 1 pc(s)767 932 4013364097391 5-1-1 1.07 kg 1 pc(s)

Type PHE3 ... PK6 20 L SB ZK PK10 30 L SB ZKPart No. 767 922 767 932Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, Category “L“Category “L“ for overhead lines.

766 037 ISMTC N 36 ZK 10600

766 037 4013364125940 5-2-1 6.56 kg 1 pc(s)

Type ISMTC N 36 ZK 10600Part No. 766 037Nominal voltage (UN)Total length (lG max / IG min)PU

Accessories for PHE III ZK Indicator with Test Prod

For PHE III Indicator with Test Prod, with universal Gear CouplingWith scale for measuring the ground clearance, mounted support included.

766 368 IS ZK STK 670

766 368 4013364115026 5-2-1 340 g 1 pc(s)

Type IS ZK STK 670Part No. 766 368Nominal voltage (UN)Total length (lG)PU

For PHE III, with universal Gear Coupling

Capacitive voltage detector as a separate device in accordance with EN/IEC 61243-1 (DIN VDE 0682-411) for verifying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110 (DIN VDE 0105-100).With universal gear coupling in accordance with EN/IEC 60832 (DIN VDE 0682-211) that allows the voltage detector to be mounted on an insulating stick.• For use in wet weather conditions• For indoor and outdoor use• With self-testing element• Standby function• Universal gear coupling• Visual and acoustic indicator• Easy battery replacement without additional tools• Detachable test prods

PHE III ZK Indicator with Test Prod2021

Wiederholungsp

rüfung

Nächste




Vol

tage

Det

ecto

rs

767 724 PHE3S 20 S ZK

767 724 4013364125902 5-1-1 4.22 kg 1 pc(s)

Type PHE3S 20 S ZKPart No. 767 724Nominal voltage (UN)PU

Nominal Voltage 20 kV / 50 Hz, Category “S“Category „S“ for switchgear installations and overhead lines.

767 725 PHE3S 20 L ZK

767 725 4013364125919 5-1-1 9.1 kg 1 pc(s)

Type PHE3S 20 L ZKPart No. 767 725Nominal voltage (UN)PU

Nominal Voltage 20 kV / 50 Hz, Category “L“Category “L“ for overhead lines.

Parts list:Pos. Part No. Pos. Part No.1 766 924 19 767 1292 766 923 20 766 3523 766 927 21 766 3594 766 960 22 766 3585 767 763 23 766 3686 767 764 24 766 0377 767 766 25 766 3358 767 771 26 766 1149 767 772 27 766 115

10 767 722 28 766 12811 767 972 29 766 12012 767 974 30 766 04913 767 734 31 766 88914 767 726 32 767 99615 767 732 33 766 99616 767 735 34 766 03617 767 963 35 766 99818 767 965 36 766 039

For more detailed information on these products,


767 970 PHE3S 30 60 S

767 970 4013364143746 5-1-1 5.8 kg 1 pc(s)

Type PHE3S 30 60 SPart No. 767 970Nominal voltage (UN)PU

Nominal Voltage Range 30 ... 60 kV / 50 Hz, Category “S“Category “S” for switchgear installations and overhead lines.

Kit includes:Type Part No. Pos. No.

PHE3 30 60 S 767 971 1+8+11+26+29+31KLT 133 34 10 766 996 33

32

233 10

425

5

34

1

30

102 24

7

36

33

8 26

3129

11

Capacitive voltage detector as a complete device in accordance with EN/IEC 61243-1 (DIN VDE 0682-411) for verifying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For indoor and outdoor use• With self-testing element• Visual and acoustic indicator• Easy battery replacement without additional tools• Transport case included

PHE III Voltage Detector Kit2021

Wiederholungsp

rüfung

Nächste

Possible lengths:Length lG Insertion depth l0 Pos. No.3080 mm 1580 mm 4+5+10+23+252290 mm 800 mm 3+5+10+23+251660 mm 800 mm 3+5+10+23



3. V

olta

ge D

etec

tors

767 975 PHE3S 30 60 L

767 975 4013364143708 5-1-1 5.42 kg 1 pc(s)

Type PHE3S 30 60 LPart No. 767 975Nominal voltage (UN)PU

Nominal Voltage Range 30 ... 60 kV / 50 Hz, Category “L“Category “L“ for overhead lines.

767 980 PHE3S2 60 110 S

767 980 4013364125926 5-1-1 5.98 kg 1 pc(s)

Type PHE3S2 60 110 SPart No. 767 980Nominal voltage (UN)PU

Nominal Voltage Range 60 ... 110 kV / 50 Hz, Category “S“Category “S” for switchgear installations and overhead lines.


PHE3 30 60 L 767 973 2+9+12+26+29+31KLT 133 34 10 766 996 33


PHE3 60 110 S 767 990 1+8+13+27+29+31KKL PHE3 60 110 766 998 35


PHE3 60 110 L 767 991 2+9+14+27+29+31KKL PHE3 60 110 766 998 35

767 981 PHE3S2 60 110 L

767 981 4013364125933 5-1-1 5.66 kg 1 pc(s)

Type PHE3S2 60 110 LPart No. 767 981Nominal voltage (UN)PU

Nominal Voltage Range 60 ... 110 kV / 50 Hz, Category “L“Category “L” for overhead lines.

767 982 PHE3S2 60 132 SL

767 982 4013364125841 5-1-1 7.4 kg 1 pc(s)

Type PHE3S2 60 132 SLPart No. 767 982Nominal voltage (UN)PU

Nominal Voltage Range 60 ... 132 kV / 50 Hz, Category “S / L“The test set includes two test prods of different lengths which are labelled “S” (long test prod) and “L” (short test prod) on the rating plate.

Category “S” for switchgear installations and overhead lines.Category “L” for overhead lines.


PHE3 60 132 SL 767 992 1+2+8+9+15+20+ 28+29+31

KLT 133 34 10 766 996 33

2

33

9 26

312912

312935

35

33

13

9

1

3129

27

2

8

14 27

9 31292

15201 8 28



Vol

tage

Det

ecto

rs

767 983 PHE3S2 60 132 SL ZK

767 983 4013364125858 5-1-1 6.38 kg 1 pc(s)

Type PHE3S2 60 132 SL ZKPart No. 767 983Nominal voltage (UN)PU

Nominal Voltage Range 60 ... 132 kV / 50 Hz with Gear Coupling, Category “S / L“The test set includes two test prods of different lengths which are labelled “S“ (long test prod) and “L“ (short test prod) on the rating plate.Category “S“ for switchgear installations and overhead lines.Category “L“ for overhead lines.

767 131 PHE3S 110 132 S

767 131 4013364139411 5-1-1 6.2 kg 1 pc(s)


Nominal Voltage Range 110 ... 132 kV / 50 and 16.7 Hz, Category “S“Category “S“ for 50 Hz three-phase systems and 16.7 Hz centre-earthed monophase traction power lines.

Nominal Voltage Range 10 ... 30 kV / 50 Hz and 60 ... 110 kV / 50 Hz, Category “S“With two voltage detectors of category “S“.

767 984 PHE3S 10 110 S

767 984 4013364136083 5-1-1 6.2 kg 1 pc(s)



PHE3 60 132 SL ZK 767 993 1+2+8+9+16+ 21+28+29+31

KLT 133 34 10 766 996 33


PHE3 110 132 S 767 130 1+8+19+20+28+29+31KLT 133 34 10 766 996 33


PHE3 60 110 S IT 767 962 1+8+17+27PHE3 10 30 S ZK30 767 964 6+18+22

H STK 43 800 766 120 29KLT 133 34 10 766 996 33

33

33

33

9 31292

16211 8 28

3129

19201 8 28

18

29

6

17

221 8

27




3. V

olta

ge D

etec

tors

767 403 PHE 3 S767 406 PHE 6 S767 418 PHE 10 S767 428 PHE 20 S767 438 PHE 30 S

767 403 4013364094024 5-1-1 2.14 kg 1 pc(s)767 406 4013364094031 5-1-1 1.3 kg 1 pc(s)767 418 4013364094048 5-1-1 1.2 kg 1 pc(s)767 428 4013364094055 5-1-1 1.4 kg 1 pc(s)767 438 4013364135628 5-1-1 1.6 kg 1 pc(s)

Nominal Voltages up to 30 kV / 50 HzCategory “S“ for switchgear installations and overhead lines.

767 410 PHE 3 10 S767 420 PHE 6 20 S767 430 PHE 15 30 S


Type PHE ... 3 10 S 6 20 S 15 30 SPart No. 767 410 767 420 767 430Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 HzCategory “S“ for switchgear installations and overhead lines.

767 433 PHE U 3 30 S

767 433 4013364094000 5-1-1 1.5 kg 1 pc(s)

Type PHE ... U 3 30 SPart No. 767 433Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 30 kV / 50 Hz, switchableCategory “S“ for switchgear installations and overhead lines.

Capacitive voltage detector as a complete device in accordance with EN/IEC 61243-1 (DIN VDE 0682-411) for verifying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For indoor and outdoor use• With self-testing element• Visual indicator• Easy battery replacement • Easy transport due to detachable insulating stick

PHE Voltage Detector2021

Wiederholungsp

rüfung

Nächste

767 413 PHE 15 16.7 BEL STK

767 413 4013364128750 5-1-1 1.77 kg 1 pc(s)

Type PHE ... 15 16.7 BEL STKPart No. 767 413Nominal voltage (UN)Total length (lG)PU

Nominal Voltage 15 kV / 16.7 HzFor traction power lines.

Use for traction power linesVoltage detectors for traction power lines have a shorter extension than voltage detectors for overhead contact lines. To ensure reliable indication, the PHE 15 16.7 BEL STK voltage detector may only be used for traction power lines and not for other components of overhead contact lines. Moreover, it must not be used from ladder trolleys for overhead contact lines.Traction power lines are supply lines, line feeders, bypass lines, connecting lines, feeder lines, 15 kV cables, cable sealing ends, switch lines and transverse switch lines.

Type PHE ... 3 S 6 S 10 S 20 S 30 SPart No. 767 403 767 406 767 418 767 428 767 438Nominal voltage (UN)Total length (lG)PU



Vol

tage

Det

ecto

rs

766 617 PHE 15 16.7 6T TA

766 617 4013364101760 5-1-2 4.95 kg 1 pc(s)

Type PHE 15 16.7 ... 6T TAPart No. 766 617Nominal voltage (UN)FrequencyTotal length (lG)DB material No.PU

Nominal Voltage 15 kV / 16.7 Hz (for Transport in Motor Vehicles)Detachable (six elements).

766 616 PHE 15 16.7 4T TA

766 616 4013364126091 5-1-2 5.09 kg 1 pc(s)

Type PHE 15 16.7 ... 4T TAPart No. 766 616Nominal voltage (UN)FrequencyTotal length (lG)DB material No.PU

Nominal Voltage 15 kV / 16.7 HzDetachable (four elements).

6

92 4

10

8 97

11

53

1

Parts list:Pos. Part No. Pos. Part No.1 766 619 7 766 0762 766 678 8 766 0773 766 677 9 766 8894 766 072 10 766 6025 766 075 11 766 7046 766 073For more detailed information

on these products, see Accessories chapter.

767 416 PHE 3 20 S FU 1P

767 416 4013364084247 5-1-2 2.62 kg 1 pc(s)

Type PHE ... 3 20 S FU 1PPart No. 767 416Nominal voltage (UN)Total length (lG)DB material No.PU

Nominal Voltage Ranges 20 kV / 50 Hz or 16.7 Hz, switchableFor three-phase systems and single-ended monophase switchgear installations.

767 415 PHE 6 20 S 16.7 1P

767 415 4013364081116 5-1-1 1.52 kg 1 pc(s)

Type PHE ... 6 20 S 16.7 1PPart No. 767 415Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 20 kV / 16.7 HzFor single-ended monophase switchgear installations and point heating systems.

Capacitive voltage detector in accordance with DIN VDE 0681-6 for verifying safe isolation form supply voltage by making contact with the overhead line of electric railways in accordance with EN 51110 (DIN VDE 0105-100).• For use in wet weather conditions• For overhead contact lines of electric railways• With self-testing element• Visual indication• Easy transport due to detachable insulating sticks • Consisting of six elements for transport in motor vehicles• Storage bag included in delivery

PHE Voltage Detector Kit2021

Wiederholungsp

rüfung

Nächste





3. V

olta

ge D

etec

tors

Parts list:Pos. Part No. Pos. Part No.1 767 576 6 767 5642 767 577 7 766 3693 767 591 8 767 5744 767 592 9 767 9965 767 593For more detailed information


767 571 ASPS 110 420 L

767 571 4013364124967 5-1-9 1.99 kg 1 pc(s)

Type ASPS 110 ... 420 LPart No. 767 571Nominal voltage (UN)FrequencyTotal length (lG)PU

Category “L“, 50 HzFor overhead lines in accordance with the DIN VDE V 0682-417/10.2013 preliminary standard.Category “L“


ASP 110 420 L 767 581 1+3+7KLT 104 9 767 574 8

767 565 ASPS 110 132 16.7 L

767 565 4013364143760 5-1-9 2.03 kg 1 pc(s)

Type ASPS 110 ... 132 16.7 LPart No. 767 565Nominal voltage (UN)FrequencyTotal length (lG)DB drawing No.PU

Category “L“, 16.7 Hz

traction power lines.


ASP 110 132 16.7 L 767 585 1+6+7KLT 104 9 767 574 8

767 572 ASPS 110 420 S

767 572 4013364124974 5-1-9 2.01 kg 1 pc(s)

Type ASPS 110 ... 420 SPart No. 767 572Nominal voltage (UN)FrequencyTotal length (lG)PU

Category “S“, 50 HzFor outdoor switching stations.Category “S“


ASP 110 420 S 767 582 2+4+7KLT 104 9 767 574 8

767 573 ASPS 110 420 S L

767 573 4013364134270 5-1-9 3.57 kg 1 pc(s)

Type ASPS 110 ... 420 S LPart No. 767 573Nominal voltage (UN)FrequencyTotal length (lG)PU

Category “S / L“, 50 HzFor overhead lines and outdoor switching stations.Category “L“ and “S“


ASP 110 420 S L 767 583 1+2+5+7KLT 101 30 10 767 996 9

8731

8

8

9

761

742

751

2

Distance voltage detector for verifying that the installation is dead on all poles by making contact with the earthed part of the insulator in the station in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For overhead lines and outdoor switching stations• With self-testing element• Visual and acoustic indicator• • Easy battery replacement without additional tool• In a suitable storage bag

ASP Distance Voltage Detector2021

Wiederholungsp

rüfung

Nächste



Vol

tage

Det

ecto

rs

767 542 HSA194 110 420 16.7

767 542 4013364086616 5-1-9 5.35 kg 1 pc(s)

Type HSA194 110 420 16.7Part No. 767 542Nominal voltage range (UN)Total length (lG)DB drawing No.PU

Nominal Voltage Range 110 ... 420 kV / 16.7 Hz

766 706 PHG2 6766 710 PHG2 10766 720 PHG2 20

766 706 4013364094307 5-1-0 800 g 1 pc(s)766 710 4013364094314 5-1-0 1.7 kg 1 pc(s)766 720 4013364094321 5-1-0 1.7 kg 1 pc(s)

Type PHG2 ... 6 10 20Part No. 766 706 766 710 766 720Nominal voltage (UN)Total length (lG)PU

Nominal Voltages up to 20 kV / 50 HzCategory “S“ for indoor switchgear installations.

Distance voltage detector for verifying safe isolation from supply voltage by making contact with the earthed part of the insulator in the installation in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For verifying safe isolation from supply voltage of centre-earthed monophase traction current lines without making contact• With self-testing element• Visual and acoustic indicator• Storage bag included in delivery

HSA 194 Distance Voltage Detector2021

Wiederholungsp

rüfung

Nächste

Capacitive voltage detector as a complete device in accordance with EN/IEC 61243-1 (DIN VDE 0682-411) for verifying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For indoor use• Three LEDs allow for better visibility of the indication• Without batteries

PHG II Voltage Detector2021

Wiederholungsp

rüfung

Nächste

Non-contact high-voltage indicator for verifying safe isolation from supply voltage on all poles by maintaining the minimum distance from the live part according to the nominal voltage at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For overhead lines and outdoor switching stations• Wide nominal range• With self-testing element• Visual and acoustic indication• Transport case included in delivery

HSA 205 High-Voltage Indicator

767 552 HSA205 U 1 420 STK

767 552 4013364115736 5-1-9 2 kg 1 pc(s)

Type HSA205 U 1 420 STKPart No. 767 552Nominal voltage range (UN)Total length (lG)PU

Nominal Voltage Ranges up to 420 kV / 50 Hz, switchable



3. V

olta

ge D

etec

tors

767 656 PHEG1.FD P SN7647767 652 PHEG1.FD P SN7544

767 656 4013364157101 5-1-5 4.2 kg 1 pc(s)767 652 4013364157088 5-1-5 4.2 kg 1 pc(s)

Type PHEG1.FD P SN7647 PHEG1.FD P SN7544Part No. 767 656 767 652Response voltage (Ut)Nominal voltage (UN)Length (earthing cable)Total length (lG)PU

PHE/G I for Overhead Contact Lines, positive Pole on Indicator with Test Prod One stick (four elements)• For direct voltage systems with earthed negative pole• Positive pole: Indicator with test prod• Negative pole: Earth clamp•

767 666 PHEG1.S P SN7401

767 666 4013364157071 5-1-5 2.2 kg 1 pc(s)

Type PHEG1.S P SN7401Part No. 767 666Response voltage (Ut)Nominal voltage (UN)Length (earthing cable)Total length (lG)PU

PHE/G I for Switchgear Installations, positive Pole on Indicator with Test Prod One stick • For direct voltage systems with earthed negative pole• Positive pole: Indicator with test prod• Negative pole: Earth clamp

767 671 PHEG2.P SN7517

767 671 4013364156807 5-1-5 2.6 kg 1 pc(s)

Type PHEG2.P SN7517Part No. 767 671Response voltage (Ut)Nominal voltage (UN)Length (connecting cable) Total length (lG)PU

PHE/G II for Switchgear InstallationsTwo sticks• For unearthed direct voltage installations • For d.c. links • Positive pole: Indicator with test prod• Negative pole: Insulating stick

Resistive d.c. voltage detector (two-pole) as a complete device based on EN/IEC 61243-2 (DIN VDE 0682-412) for verifying safe isolation from supply voltage at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For nominal voltages up to 7.5 kV d.c. or 24 kV d.c.• For use in wet weather conditions• For indoor and outdoor use• With self-testing element• Visual indicator• Earth clamp with adjustable handle and magnet• • Easy transport due to detachable insulating stick

PHE/G d.c. Voltage Detector2021

Wiederholungsp

rüfung

Nächste



Vol

tage

Det

ecto

rs

766 544 SPN 500PR766 548 SPN 1000PR

766 544 4013364156111 5-1-3 415 g 1 pc(s)766 548 4013364156128 5-1-3 417 g 1 pc(s)

Type SPN ... 500PR 1000PRPart No. 766 544 766 548Nominal voltage range (UN)Dimensions (indicator)PU

SPN Voltage DetectorBasic devices.

766 542 VS 500 SPN II

766 542 4013364051706 5-1-3 71.4 g 1 pc(s)

Type VS 500 SPN IIPart No. 766 542LengthPU

Accessories for two-pole SPN Voltage Detector

Extension ProdFor use in overhead line networks, to be screwed onto the basic device.

766 543 AT SPN II

766 543 4013364051683 5-1-7 148 g 1 pc(s)

Type AT SPN IIPart No. 766 543DimensionsColour Black1PU

For SPN voltage detectors (basic device with extension prods).

Two-pole voltage detector for low-voltage systems in accordance with DIN VDE 0682-401 for verifying safe isolation from supply voltage on all poles at the work location in accordance with EN 50110 (DIN VDE 0105-100).

Two-pole SPN Voltage Detector2021

Wiederholungsp

rüfung

Nächste

767 639 PHEG2 P SN7346

767 639 4013364155817 5-1-5 2.4 kg 1 pc(s)

Type PHEG2 P SN7346Part No. 767 639Response voltage (Ut)Nominal voltage (UN)Length (connecting cable) Total length (lG)PU

PHE/G II, angled positive PoleTwo sticks• For unearthed direct voltage installations • For d.c. links • Positive pole: Indicator with test prod• Negative pole: Insulating stick

767 645 PHEG2 P SN7259767 647 PHEG2 P SN7552767 637 PHEG2 P SN7194


Type PHEG2 P SN7259 PHEG2 P SN7552 PHEG2 P SN7194Part No. 767 645 767 647 767 637Response voltage (Ut)Nominal voltage (UN)Length (connecting cable) Total length (lG)PU

PHE/G II for Switchgear Installations and d.c. LinksTwo sticks• For unearthed direct voltage installations • For d.c. links (e.g. electric locomotives; Part No. 767 647)• Positive pole: Indicator with test prod• Negative pole: Insulating stick


Valid as of 01.01.2015 www.dehn-international.com 27

3. Verify that the Installation is dead – Phase Comparator

3. P

hase

Com

para

tor

759 300 PHV 3 36 STK

759 300 4013364125964 5-1-6 1.2 kg 1 pc(s)

Type PHV 3 36 STKPart No. 759 300Nominal voltage (UN)Colour Grey1Length (test unit) (l2)PU

PHV Test UnitThe two-pole PHV phase comparator consists of a test unit and two test prods which are attached to the test unit (to be ordered separately).To avoid confusion, the test prods have different colours according to the nominal voltage.

759 111 PS 10 12 PHV D11759 121 PS 20 24 PHV D11

759 111 4013364010376 5-1-6 200 g 1 pc(s)759 121 4013364013971 5-1-6 154 g 1 pc(s)

Type PS 10 12 PHV D11 PS 20 24 PHV D11Part No. 759 111 759 121Nominal voltage (UN)Colour Black1 Black1Length (test prod) (l1)PU

Test Prods (Ø11 mm)For nominal voltage ranges up to 24 kV / 50 Hz.Note: 2 tests prods are required for a test unit.• For type-tested switchgear installations (e.g. Mipak)

Resistive phase comparator (two sticks) in accordance with EN/IEC 61481 (DIN VDE 0682-431) for testing in-phase conditions on all poles by making contact with three-phase systems in accordance with EN 50110 (DIN VDE 0105-100).• Not for use in wet weather conditions• For indoor and outdoor use• Colour-coded test prods according to nominal voltage• Eccentric mounting of the visual indicator ensures high visibility • Easy transport due to detachable test prods• • Without batteries

Two-pole PHV Phase Comparator2021

Wiederholungsp

rüfung

Nächste

759 603 PS 3 3.6 PHV759 605 PS 5 7.2 PHV759 610 PS 10 12 PHV759 615 PS 10 17.5 PHV759 620 PS 15 24 PHV

759 603 4013364097469 5-1-6 205 g 1 pc(s)759 605 4013364097476 5-1-6 336 g 1 pc(s)759 610 4013364097483 5-1-6 405 g 1 pc(s)759 615 4013364097520 5-1-6 400 g 1 pc(s)759 620 4013364097490 5-1-6 340 g 1 pc(s)

Type PS 3 3.6 PHV PS 5 7.2 PHV PS 10 12 PHVPart No. 759 603 759 605 759 610Nominal voltage (UN)Colour Grey1 White2 Yellow1

Length (test prod) (l1)PU

Straight Test ProdsFor nominal voltage ranges up to 24 kV / 50 Hz.Note: 2 tests prods are required for a test unit.

Type PS 10 17.5 PHV PS 15 24 PHVPart No. 759 615 759 620Nominal voltage (UN)Colour Grey1 Green1Length (test prod) (l1)PU

28 www.dehn-international.com Valid as of 01.01.2015

3. Verify that the Installation is dead – Phase Comparator3.

Pha

se C

ompa

rato

r

759 606 PHV1 6 12759 612 PHV1 12 24759 624 PHV1 24 36


Type PHV1 ... 6 12 12 24 24 36Part No. 759 606 759 612 759 624Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 36 kV / 50 Hz

759 616 PHV1 U 6 36

759 616 4013364097353 5-1-6 1.9 kg 1 pc(s)

Type PHV1 ... U 6 36Part No. 759 616Nominal voltage (UN)Total length (lG)PU

Nominal Voltage Ranges up to 36 kV / 50 Hz, switchable via Selector Ring

759 621 PS 15 24 PHV L880

759 621 4013364097513 5-1-6 370 g 1 pc(s)

Type PS 15 24 PHV L880Part No. 759 621Nominal voltage (UN)Colour Grey1Length (test prod) (l1)PU

Long Test ProdsFor nominal voltage ranges up to 24 kV / 50 Hz.Note: 2 tests prods are required for a test unit.• For type-tested switchgear installations (e.g. Driescher D600)

759 604 PS 3 3.6 PHV W90759 608 PS 5 7.2 PHV W90759 611 PS 10 12 PHV W90759 622 PS 15 24 PHV W90


Type PS 3 3.6 PHV W90 PS 5 7.2 PHV W90 PS 10 12 PHV W90 PS 15 24 PHV W90Part No. 759 604 759 608 759 611 759 622Nominal voltage (UN)Colour Grey1 White2 Yellow1 Green1Length (test prod) (l1)PU

90° angled Test ProdsFor nominal voltage ranges up to 24 kV / 50 Hz.Note: 2 tests prods are required for a test unit.• For type-tested switchgear installations (e.g. Alstom)

Capacitive phase comparator in accordance with EN/IEC 61481 (DIN VDE 0682-431) for verifying in-phase conditions on all poles by making contact with three-phase systems in accordance with EN 50110 (DIN VDE 0105-100).• For use in wet weather conditions• For indoor and outdoor use• With self-testing element• Easy battery replacement• Easy transport due to detachable insulating stick

Single-pole PHV I Phase Comparator2021

Wiederholungsp

rüfung

Nächste


3. Verify that the Installation is dead – DEHNcap Voltage Detecting System

3. D

EHN

cap

Volt

age

Det

ecti

ng S

yste

m

767 101 SAG DCA P HR GA

767 101 4013364069541 5-1-4 60 g 1 pc(s)

Type SAG DCA P ... HR GAPart No. 767 101DimensionsPlug spacingPU

DEHNcap/P-HR

767 102 SAG DCA P LRM GA

767 102 4013364074064 5-1-4 62 g 1 pc(s)

Type SAG DCA P ... LRM GAPart No. 767 102DimensionsPlug spacingPU

DEHNcap/P-LRM

767 110 TG DCA

767 110 4013364070905 5-1-4 119.3 g 1 pc(s)

Type TG DCAPart No. 767 110DimensionsPU

Accessories for DEHNcap/P Voltage Indicator

Test Unit for DEHNcap/PTest unit for testing DEHNcap/P voltage indicators or other HR (HO) or LRM indicators for correct operation. Both HR and LRM devices can be tested. The test unit is plugged into the mains socket outlet and generates both test voltages for HR and LRM systems.

Electronic voltage indicator in accordance with EN/IEC 61243-5 (DIN VDE 0682-415) for use in switchgear installations with LRM test sockets (in combination with Part No. 767 133 also with HR test sockets) for verifying safe isolation from supply voltage on all poles at the work location.• Nominal voltages up to 45 kV / 50 Hz (three-phase system)• Active voltage indicator for verifying safe isolation from supply voltage• Indication by two separate LEDs• With integrated self-testing element and battery monitoring function• Automatically deactivated after use

DEHNcap/A Voltage Indicator

767 112 SAG DCA A LRM

767 112 4013364074361 5-1-4 150 g 1 pc(s)

Type SAG DCA A LRMPart No. 767 112DimensionsPlug spacingPU

DEHNcap/A-LRM

Passive voltage indicator in accordance with EN/IEC 61243-5 (DIN VDE 0682-415) for verifying safe isolation from supply voltage on all poles at the work location for switchgear installations with HR or LRM test sockets.• Nominal voltages up to 45 kV / 50 Hz (three-phase system)• Passive voltage indicator without batteries• LED indication• May be installed as permanent voltage indicator

DEHNcap/P Voltage Indicator2021

Wiederholungsp

rüfung

Nächste

2021

Wiederholungsp

rüfung

Nächste


3. Verify that the Installation is dead – DEHNcap Voltage Detecting System3.

DEH

Nca

p Vo

ltag

e D

etec

ting

Sys

tem

767 122 SPG DCA IT LRM

767 122 4013364074385 5-1-4 185 g 1 pc(s)

Type SPG DCA IT LRMPart No. 767 122DimensionsPlug spacingPU

DEHNcap/IT-LRM

767 132 PV DCA PC LRM

767 132 4013364073005 5-1-4 640 g 1 pc(s)

Type PV DCA PC ... LRMPart No. 767 132DimensionsLength (measuring cable)PU

DEHNcap/PC-LRM

767 139 PV DCA PC LRM T

767 139 4013364136953 5-1-4 820 g 1 pc(s)

Type PV DCA PC ... LRM TPart No. 767 139DimensionsLength (measuring cable)PU

DEHNcap/PC-LRM Phase Comparator Set

767 500 KLT 23 16 4

767 500 4013364105676 5-1-8 280 g 1 pc(s)

Type KLT 23 16 4Part No. 767 500DimensionsPU

Accessories for DEHNcap/PC-LRM Phase Comparator

With shoulder strap

LRM test sockets (in combination with Part No. 767 133 also with HR test sockets) in accordance with BGV A3.• Nominal voltages up to 45 kV / 50 Hz (three-phase system)• Active indicator for maintenance tests on coupling systems• Indication by two separate LEDs• With integrated self-testing element and battery monitoring function• Automatically deactivated after use

DEHNcap/IT Interface Test Unit

Electronic phase comparator in accordance with EN/IEC 61243-5 (DIN VDE 0682-415) for verifying in-phase conditions on all poles of switch-gear installations with HR or LRM test sockets.• Nominal voltages up to 45 kV / 50 Hz (three-phase system)• Active indicator for verifying in-phase conditions on LRM test sockets• Can be used for HR test sockets with two HR-LRM test adapters• Indication by three separate LEDs• Comparator detects zero crossings of both systems to be compared• With battery monitoring function

DEHNcap/PC-LRM Phase Comparator2021

Wiederholungsp

rüfung

Nächste

2021

Wiederholungsp

rüfung

Nächste


3. Verify that the Installation is dead – DEHNcap Voltage Detecting System

3. D

EHN

cap

Volt

age

Det

ecti

ng S

yste

m

767 150 PS DCA HR LRM

767 150 4013364139473 5-1-4 1.94 kg 1 pc(s)

Type PS DCA HR LRMPart No. 767 150DimensionsPU

DEHNcap HR-LRM Test Set

Pos. Part No. Pos. Part No.1 1x 767 112 4 2x 767 1332 1x 767 122 5 1x 767 1073 1x 767 132For more detailed information on these products,


5

24 1 3

767 133 MA DCA HR LRM

767 133 4013364073494 5-1-4 85.1 g 1 pc(s)

Type MA DCA ... HR LRMPart No. 767 133DimensionsPlug spacingSocket spacingPU

For electrical and mechanical adaptation of HR (HO) to LRM systems.Used as a measuring impedance with XC = 36 Mohms for maintenance tests on HR coupling systems (with suitable μA meter).

767 136 MA DCA LR LRM

767 136 4013364081109 5-1-4 65 g 1 pc(s)

Type MA DCA ... LR LRMPart No. 767 136DimensionsPlug spacingSocket spacingPU

For mechanical adaptation of LR (NO) to LRM systems.

767 135 MA DCA XC LRM

767 135 4013364077720 5-1-4 85.1 g 1 pc(s)

Type MA DCA ... XC LRMPart No. 767 135DimensionsPlug spacingSocket spacingPU

Used as a measuring impedance with XC = 2 Mohms for maintenance tests on LRM coupling systems (with suitable μA meter).

Set in a plastic case for verifying safe isolation from supply voltage and in-phase conditions in HR and LRM systems.

DEHNcap HR-LRM Test Set2021

Wiederholungsp

rüfung

Nächste

HR-LRM test adapter, LR-LRM test adapter and XC-LRM measuring impedance in accordance with EN/IEC 61243-5 (DIN VDE 0682-415) for mechanical and electrical adaptation e.g.: voltage indicators, interface test units, phase comparators and μA meter, at switchgear installations with HR (HO), LR and LRM test sockets.• Easy mechanical and electrical adaptation to HR, LR or XC test sockets• Measuring impedance for maintenance tests on coupling systems with suitable μA meter• 4 mm safety plugs or sockets• Energised HR plug, insulated

DEHNcap Test Adapter / Measuring Impedance

DEHN protects.


4. Carry out Earthing and Short-Circuiting – EaS Devices

4. E

aS D

evic

es

706 300 KFP 20 S AL 12756 300 KFP 25 S AL 12

706 300 4013364003675 5-3-1 129 g 1 pc(s)756 300 4013364003682 5-3-1 212 g 1 pc(s)

Type KFP ... 20 S AL 12 25 S AL 12Part No. 706 300 756 300Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Angled with Terminal Lug

755 626 KFP 25 M16 25 SKM755 627 KFP 25 M12 35 SKM755 646 KFP 25 M16 45 SKM

755 626 4013364079625 5-5-2 301 g 1 pc(s)755 627 4013364077768 5-5-2 310.9 g 1 pc(s)755 646 4013364079632 5-5-2 330 g 1 pc(s)

Type KFP ... 25 M16 25 SKM 25 M12 35 SKM 25 M16 45 SKMPart No. 755 626 755 627 755 646Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sDB material No.PU

Straight with threaded Pin, Nut and Washer

755 636 KFP 25 M16 25

755 636 4013364079670 5-5-2 309.5 g 1 pc(s)Type KFP ... 25 M16 25Part No. 755 636Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sDB material No.PU

Straight with threaded Pin

754 205 KFP 20 M10754 200 KFP 20 M12754 600 KFP 20 M16755 200 KFP 25 M12755 600 KFP 25 M16

754 205 4013364097865 5-3-1 136.6 g 1 pc(s)754 200 4013364004207 5-3-1 131.3 g 1 pc(s)754 600 4013364004214 5-3-1 116 g 1 pc(s)755 200 4013364000087 5-3-1 220 g 1 pc(s)755 600 4013364000094 5-3-1 204 g 1 pc(s)

Straight with female Thread

Type KFP ... 20 M10 20 M12 20 M16 25 M12 25 M16Part No. 754 205 + 754 200 754 600 755 200 755 600Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

754 235 KFP 20 M12 35 SSM754 645 KFP 20 M16 45 SSM755 225 KFP 25 M12 25 SSM755 245 KFP 25 M12 45 SSM755 645 KFP 25 M16 45 SSM

754 235 4013364004221 5-3-1 183.7 g 1 pc(s)754 645 4013364004238 5-3-1 286.8 g 1 pc(s)755 225 4013364004498 5-3-1 265 g 1 pc(s)755 245 4013364000070 5-3-1 278 g 1 pc(s)755 645 4013364000100 5-3-1 318.9 g 1 pc(s)

Straight with threaded Pin and self-locking Nut

Type KFP ... 20 M12 35 SSM 20 M16 45 SSM 25 M12 25 SSM 25 M12 45 SSM 25 M16 45 SSMPart No. 754 235 754 645 755 225 755 245 755 645Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Line and earth connection point in accordance with EN/IEC 61230 (DIN VDE 0683-100) at the conductor and earth-termination system.• • M12 and M16 threaded pin with self-locking nut• M12 and M16 female thread (not cut)

Fixed Ball Points


4. Carry out Earthing and Short-Circuiting – EaS Devices4.

EaS

Dev

ices

706 235 KFP 20 W45 M12 35SSM706 645 KFP 20 W45 M16 45SSM756 245 KFP 25 W45 M12 45SSM756 645 KFP 25 W45 M16 45SSM

706 235 4013364004290 5-3-1 219.4 g 1 pc(s)706 645 4013364004306 5-3-1 273.8 g 1 pc(s)756 245 4013364004337 5-3-1 434.4 g 1 pc(s)756 645 4013364004344 5-3-1 469.8 g 1 pc(s)

Type KFP ... 20 W45 M12 35SSM 20 W45 M16 45SSM 25 W45 M12 45SSM 25 W45 M16 45SSMPart No. 706 235 706 645 756 245 756 645Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

45° angled with threaded Pin and self-locking Nut

706 200 KFP 20 W45 M12706 600 KFP 20 W45 M16756 200 KFP 25 W45 M12756 600 KFP 25 W45 M16

706 200 4013364004276 5-3-1 172.4 g 1 pc(s)706 600 4013364004283 5-3-1 158.4 g 1 pc(s)756 200 4013364004313 5-3-1 357.2 g 1 pc(s)756 600 4013364004320 5-3-1 356 g 1 pc(s)

Type KFP ... 20 W45 M12 20 W45 M16 25 W45 M12 25 W45 M16Part No. 706 200 706 600 756 200 756 600Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

45° angled with female Thread

707 235 KFP 20 W90 M12 35SSM707 645 KFP 20 W90 M16 45SSM757 245 KFP 25 W90 M12 45SSM757 645 KFP 25 W90 M16 45SSM

707 235 4013364004382 5-3-1 259.2 g 1 pc(s)707 645 4013364004399 5-3-1 298.8 g 1 pc(s)757 245 4013364004429 5-3-1 454.4 g 1 pc(s)757 645 4013364004436 5-3-1 491.2 g 1 pc(s)

Type KFP ... 20 W90 M12 35SSM 20 W90 M16 45SSM 25 W90 M12 45SSM 25 W90 M16 45SSMPart No. 707 235 707 645 757 245 757 645Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

90° angled with threaded Pin and self-locking Nut

707 200 KFP 20 W90 M12707 600 KFP 20 W90 M16757 200 KFP 25 W90 M12757 600 KFP 25 W90 M16

707 200 4013364004368 5-3-1 204.4 g 1 pc(s)707 600 4013364004375 5-3-1 191 g 1 pc(s)757 200 4013364004405 5-3-1 394.8 g 1 pc(s)757 600 4013364004412 5-3-1 370 g 1 pc(s)

Type KFP ... 20 W90 M12 20 W90 M16 25 W90 M12 25 W90 M16Part No. 707 200 707 600 757 200 757 600Fixed ball point ØDimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

90° angled with female Thread

720 010 KFP 20 RL 10720 012 KFP 20 RL 12720 014 KFP 20 RL 14720 016 KFP 20 RL 16720 018 KFP 20 RL 18720 020 KFP 20 RL 20725 010 KFP 25 RL 10725 012 KFP 25 RL 12725 014 KFP 25 RL 14725 016 KFP 25 RL 16725 018 KFP 25 RL 18725 020 KFP 25 RL 20

720 010 4013364077935 5-3-1 314 g 1 pc(s)720 012 4013364077942 5-3-1 346.6 g 1 pc(s)720 014 4013364077959 5-3-1 329 g 1 pc(s)720 016 4013364003729 5-3-1 309 g 1 pc(s)720 018 4013364077973 5-3-1 295.6 g 1 pc(s)720 020 4013364077980 5-3-1 275.6 g 1 pc(s)725 010 4013364003750 5-3-1 410 g 1 pc(s)725 012 4013364003767 5-3-1 400 g 1 pc(s)725 014 4013364003774 5-3-1 385 g 1 pc(s)725 016 4013364003781 5-3-1 365 g 1 pc(s)725 018 4013364078048 5-3-1 345 g 1 pc(s)725 020 4013364003804 5-3-1 320 g 1 pc(s)

Type KFP ... 20 RL 10 20 RL 12 20 RL 14 20 RL 16Part No. 720 010 720 012 720 014 720 016Fixed ball point ØFor round conductor ØdMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Straight with Round Conductor Half Shell for Round Copper Conductors Ø

d





4. E

aS D

evic

es

Earth connection point in accordance with EN/IEC 61230 (DIN VDE 0683-100).• For welding or screwing earth connectors with wing nut or wing bolt to the earth-termination system• Connectors with M12 and M16 threaded bolt• M12 and M16 female thread

Fixed Earthing Points

790 251 EFP 16 RN M12 35 SSM790 261 EFP 16 RN M16 45 SSM

790 251 4013364089501 5-3-1 248 g 1 pc(s)790 261 4013364089525 5-3-1 277 g 1 pc(s)

Type EFP 16 RN M12 35 SSM EFP 16 RN M16 45 SSMPart No. 790 251 790 261DimensionsMax. short-circuit current Ik 0.5 s 42*) 42*)

Max. short-circuit current Ik 1 s 29.6*) 29.6*)

PU

Ring Groove Fixed Point with threaded Pin and Nut

790 250 EFP 16 RN M12790 260 EFP 16 RN M16

790 250 4013364089495 5-3-1 193 g 1 pc(s)790 260 4013364089518 5-3-1 180 g 1 pc(s)

Type EFP 16 RN M12 EFP 16 RN M16Part No. 790 250 790 260DimensionsMax. short-circuit current Ik 0.5 s 42*) 42*)

Max. short-circuit current Ik 1 s 29.6*) 29.6*)

PU

*)

Ring Groove Fixed Point with female Thread

705 501 AS SCHW M12 25755 501 AS SCHW M16 30

705 501 4013364003927 5-3-1 152.2 g 1 pc(s)755 501 4013364003934 5-3-1 298.2 g 1 pc(s)

Type AS SCHW M12 25 AS SCHW M16 30Part No. 705 501 755 501DimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Welding-type Connector with threaded Pin

336 020 AS SCHW M12336 025 AS SCHW M16

336 020 4013364003941 5-3-1 118.1 g 1 pc(s)336 025 4013364003958 5-3-1 252.1 g 1 pc(s)

Type AS SCHW M12 AS SCHW M16Part No. 336 020 336 025DimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Welding-type Connector with female Thread

705 504 AS SCHR M12 M12 40

705 504 4013364008021 5-3-1 183.2 g 1 pc(s)Type AS SCHR M12 M12 40Part No. 705 504DimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Bolted-type Connector with female Thread

705 500 AS SCHR M12 55750 500 AS SCHR M16 65

705 500 4013364000025 5-3-1 122.4 g 1 pc(s)750 500 4013364000032 5-3-1 249.8 g 1 pc(s)

Type AS SCHR M12 55 AS SCHR M16 65Part No. 705 500 750 500DimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Bolted-type Connector with threaded Pin and separate hexagon Nut

705 510 AS SCHR M16 55 M12

705 510 4013364089587 5-3-1 240 g 1 pc(s)Type AS SCHR M16 55 M12Part No. 705 510DimensionsMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Bolted-type Connector for converting from M12 to M16 threaded Pin



EaS

Dev

ices

Earth connection point in accordance with EN/IEC 61230 (DIN VDE 0683-100).• For indoor and outdoor installations

Earth Connecting Plates

728 620 EAPA 3 KFP 20 KKH728 625 EAPA 3 KFP 25 KKH

728 620 4013364147843 5-3-1 985 g 1 pc(s)728 625 4013364147867 5-3-1 984 g 1 pc(s)

Type EAPA 3 KFP 20 KKH EAPA 3 KFP 25 KKHPart No. 728 620 728 625Fixed point ØMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

With three Fixed Ball Points and Ball Head Cap

728 522 EAPA 3 KFP 20 B13728 526 EAPA 3 KFP 25 B13

728 522 4013364147874 5-3-1 676 g 1 pc(s)728 526 4013364147881 5-3-1 934 g 1 pc(s)

Type EAPA 3 KFP 20 B13 EAPA 3 KFP 25 B13Part No. 728 522 728 526Fixed point ØMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

With three Fixed Ball PointsTo be mounted on earth connecting clamps with anti-rotation element (PK1).

728 516 EAPA 3 RN 16 EAB

728 516 4013364147898 5-3-1 1.44 kg 1 pc(s)Type EAPA 3 RN 16 EABPart No. 728 516Fixed point ØMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

With three Ring Groove Fixed Points and Earth Bushing

728 506 EAPA 3 RN 16 B13

728 506 4013364147904 5-3-1 867 g 1 pc(s)

Type EAPA 3 RN 16 B13Part No. 728 506Fixed point ØMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

With three Ring Groove Fixed Points To be mounted on earth connecting clamps with anti-rotation element (PK1).

728 501 EAP 2 25 KKH HG

728 501 4013364079618 5-5-2 900 g 1 pc(s)

Type EAP 2 25 KKH HGPart No. 728 501Fixed point ØDB material No.PU

With two Fixed Ball Points and Ball Head CapØ25 mm.



4. E

aS D

evic

es

Phase connection point in accordance with EN/IEC 61230 (DIN VDE 0683-100) on the conductor.• Clamp in accordance with DIN 48088-3 for use as overhead line clamp• Types for twin conductors or greater clamp widths available on request

Fixed Phase Points

731 011 PFP 11 33 AL 60 82731 013 PFP 34 48 AL 60 98731 015 PFP 49 70 AL 60 126

731 011 4013364004771 5-4-3 690 g 1 pc(s)731 013 4013364004795 5-4-3 850 g 1 pc(s)731 015 4013364004801 5-4-3 1 kg 1 pc(s)

Type PFP ... 11 33 AL 60 82 34 48 AL 60 98 49 70 AL 60 126Part No. 731 011 731 013 731 015Clamp width bFor conductors ØdMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Fixed Phase Points for Al and Al/St Overhead Line Conductors

731 027 PFP 11 33 CU 60 82731 037 PFP 34 48 CU 60 98

731 027 4013364004818 5-4-3 1.97 kg 1 pc(s)731 037 4013364005044 5-4-3 2.66 kg 1 pc(s)

Type PFP ... 11 33 CU 60 82 34 48 CU 60 98Part No. 731 027 731 037Clamp width bFor conductors ØdMax. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Fixed Phase Points for round Copper Conductors

Ød

Ød

728 503 EAP 25 SIT US OL

728 503 4013364079564 5-5-2 453 g 1 pc(s)

Type EAP 25 SIT US OLPart No. 728 503Fixed point ØDB material No.PU

Terminal Lug with one Fixed Ball PointTo be connected to a fuse holder.

728 502 EAP 2 25 MA US OL

728 502 4013364079571 5-5-2 708 g 1 pc(s)

Type EAP 2 25 MA US OLPart No. 728 502Fixed point ØDB material No.PU

Terminal Lug with two Fixed Ball PointsTo be connected to a tower.



EaS

Dev

ices

V4YPRGE EKV1+0 16 V4YPRGEVSY71K4 EKV1+0 25 VSY71K4V9JF26K EKV1+0 35 V9JF26KVRJG23Y EKV1+0 50 VRJG23YVPZBBSL EKV1+0 70 VPZBBSLVZC3FST EKV1+0 95 VZC3FSTV797FE6 EKV1+0 120 V797FE6VB53TC9 EKV1+0 150 VB53TC9

V4YPRGE 4013364165243 5-4-0 1.14 kg 1 pc(s)VSY71K4 4013364163287 5-4-0 0.98 kg 1 pc(s)V9JF26K 4013364163294 5-4-0 2.09 kg 1 pc(s)VRJG23Y 4013364163300 5-4-0 2.93 kg 1 pc(s)VPZBBSL 4013364163317 5-4-0 4 kg 1 pc(s)VZC3FST 4013364163324 5-4-0 5.48 kg 1 pc(s)V797FE6 4013364163188 5-4-0 6.65 kg 1 pc(s)VB53TC9 4013364163270 5-4-0 8.23 kg 1 pc(s)

Type EKV1+0 16 V4YPRGE

EKV1+0 25 VSY71K4

EKV1+0 35 V9JF26K

EKV1+0 50 VRJG23Y

Variant No. V4YPRGE VSY71K4 V9JF26K VRJG23YCable cross-section 2 2 2 2

Max. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 sPU

Single-pole Earthing and Short-Circuiting Cables

V7265NS EKV2+0 16 G V7265NSVZL6TGH EKV2+0 25 G VZL6TGHVPHPZV2 EKV2+0 35 G VPHPZV2VJ13VWW EKV2+0 50 G VJ13VWWVTJKEZU EKV2+0 70 G VTJKEZUVAM7M6H EKV2+0 95 G VAM7M6HVFV1Z7K EKV2+0 120 G VFV1Z7KVLL6JWS EKV2+0 150 G VLL6JWS

V7265NS 4013364163355 5-4-0 1.04 kg 1 pc(s)VZL6TGH 4013364163362 5-4-0 1.31 kg 1 pc(s)VPHPZV2 4013364163379 5-4-0 10 kg 1 pc(s)VJ13VWW 4013364162136 5-4-0 2.26 kg 1 pc(s)VTJKEZU 4013364165250 5-4-0 10 kg 1 pc(s)

VFV1Z7K 4013364163331 5-4-0 10 kg 1 pc(s)VLL6JWS 4013364163348 5-4-0 6.08 kg 1 pc(s)

Type EKV2+0 16 G V7265NS

EKV2+0 25 G VZL6TGH

EKV2+0 35 G VPHPZV2

EKV2+0 50 G VJ13VWW

Variant No. V7265NS VZL6TGH VPHPZV2 VJ13VWWCable cross-section 2 2 2 2


Two-pole Earthing and Short-Circuiting Cables

Earthing and short-circuiting cables with crimped cable lug in accordance with EN/IEC 61230 (DIN VDE 0683-100) for earthing and short-cir-cuiting electrical installations at the work location in accordance with EN 50110 (DIN VDE 0105-100).• Standard anti-rotation PK1 cable lugs •

Earthing and Short-Circuiting Cables, unequipped

EaS Configurator:

www.dehn.de/en/euk

Type EKV1+0 70 VPZBBSL

EKV1+0 95 VZC3FST

EKV1+0 120 V797FE6

EKV1+0 150 VB53TC9

Variant No. VPZBBSL VZC3FST V797FE6 VB53TC9Cable cross-section 2 2 2 2


Type EKV2+0 70 G VTJKEZU

EKV2+0 95 G VAM7M6H

EKV2+0 120 G VFV1Z7K

EKV2+0 150 G VLL6JWS

Variant No. VTJKEZU VAM7M6H VFV1Z7K VLL6JWSCable cross-section 2 2 2 2




4. E

aS D

evic

es

VE5MT89 EKV3+0 16 G VE5MT89VNC1S9W EKV3+0 25 G VNC1S9WV18JQHQ EKV3+0 35 G V18JQHQVJ7VGZD EKV3+0 50 G VJ7VGZDVH95BZZ EKV3+0 70 G VH95BZZVM2J7S3 EKV3+0 95 G VM2J7S3V8D4AQ2 EKV3+0 120 G V8D4AQ2VG3V6T2 EKV3+0 150 G VG3V6T2

VE5MT89 4013364163522 5-4-0 10 kg 1 pc(s)VNC1S9W 4013364163539 5-4-0 1.56 kg 1 pc(s)V18JQHQ 4013364163546 5-4-0 1.91 kg 1 pc(s)VJ7VGZD 4013364163553 5-4-0 2.67 kg 1 pc(s)VH95BZZ 4013364165274 5-4-0 3.54 kg 1 pc(s)VM2J7S3 4013364165281 5-4-0 5.05 kg 1 pc(s)

VG3V6T2 4013364165298 5-4-0 7.32 kg 1 pc(s)

Type EKV3+0 16 G VE5MT89

EKV3+0 25 G VNC1S9W

EKV3+0 35 G V18JQHQ

EKV3+0 50 G VJ7VGZD

Variant No. VE5MT89 VNC1S9W V18JQHQ VJ7VGZDCable cross-section 2 2 2 2


Three-pole Earthing and Short-Circuiting Cables, same Cable Cross-Section

VN35H5D EKV3+0 50 R VN35H5DVTCS2XV EKV3+0 70 R VTCS2XVVLB2F3G EKV3+0 95 R VLB2F3GV8115WA EKV3+0 120 R V8115WAV11E77B EKV3+0 150 R V11E77B

VN35H5D 4013364163560 5-4-0 2.19 kg 1 pc(s)VTCS2XV 4013364163584 5-4-0 2.84 kg 1 pc(s)VLB2F3G 4013364163607 5-4-0 3.83 kg 1 pc(s)

V11E77B 4013364163515 5-4-0 5.52 kg 1 pc(s)

Type EKV3+0 50 R VN35H5D

EKV3+0 70 R VTCS2XV

EKV3+0 95 R VLB2F3G

Variant No. VN35H5D VTCS2XV VLB2F3GCable cross-section 2 2 2


Three-pole Earthing and Short-Circuiting Cables, reduced Cable Cross-Section

Type EKV3+0 70 G VH95BZZ

EKV3+0 95 G VM2J7S3

EKV3+0 120 G V8D4AQ2

EKV3+0 150 G VG3V6T2

Variant No. VH95BZZ VM2J7S3 V8D4AQ2 VG3V6T2Cable cross-section 2 2 2 2


Type EKV3+0 120 R V8115WA EKV3+0 150 R V11E77BVariant No. V8115WA V11E77BCable cross-section 2 2




EaS

Dev

ices

VGUVRRG EKV4U0 16 G VGUVRRGVGM214B EKV4U0 25 G VGM214BV93UVAP EKV4U0 35 G V93UVAPV3NCSHX EKV4U0 50 G V3NCSHXV7GN8WU EKV4U0 70 G V7GN8WUVABRSSE EKV4U0 95 G VABRSSEV27E2GP EKV4U0 120 G V27E2GPV291ZZT EKV4U0 150 G V291ZZT

VGUVRRG 4013364164000 5-4-0 1.67 kg 1 pc(s)VGM214B 4013364164017 5-4-0 10 kg 1 pc(s)

V3NCSHX 4013364164031 5-4-0 10 kg 1 pc(s)V7GN8WU 4013364162389 5-4-0 4.62 kg 1 pc(s)

V27E2GP 4013364163980 5-4-0 10 kg 1 pc(s)V291ZZT 4013364163997 5-4-0 10 kg 1 pc(s)

Type EKV4U0 16 G VGUVRRG

EKV4U0 25 G VGM214B

EKV4U0 35 G V93UVAP

EKV4U0 50 G V3NCSHX

Variant No. VGUVRRG VGM214B V93UVAP V3NCSHXCable cross-section 2 2 2 2


Four-pole Earthing and Short-Circuiting Cables

VQ7PF5A EKV5+0 16 G VQ7PF5AVZKQZB5 EKV5+0 25 G VZKQZB5V76D5TH EKV5+0 35 G V76D5THV6VE249 EKV5+0 50 G V6VE249VDXTBGF EKV5+0 70 G VDXTBGFVGCMAA5 EKV5+0 95 G VGCMAA5VVL7AKP EKV5+0 120 G VVL7AKPVHV1NKR EKV5+0 150 G VHV1NKR

VZKQZB5 4013364164161 5-4-0 10 kg 1 pc(s)V76D5TH 4013364164178 5-4-0 10 kg 1 pc(s)V6VE249 4013364164185 5-4-0 10 kg 1 pc(s)VDXTBGF 4013364164192 5-4-0 10 kg 1 pc(s)

VHV1NKR 4013364164147 5-4-0 10 kg 1 pc(s)

Type EKV5+0 16 G VQ7PF5A

EKV5+0 25 G VZKQZB5

EKV5+0 35 G V76D5TH

EKV5+0 50 G V6VE249

Variant No. VQ7PF5A VZKQZB5 V76D5TH V6VE249Cable cross-section 2 2 2 2


Five-pole Earthing and Short-Circuiting Cables

Type EKV4U0 70 G V7GN8WU

EKV4U0 95 G VABRSSE

EKV4U0 120 G V27E2GP

EKV4U0 150 G V291ZZT

Variant No. V7GN8WU VABRSSE V27E2GP V291ZZTCable cross-section 2 2 2 2


Type EKV5+0 70 G VDXTBGF

EKV5+0 95 G VGCMAA5

EKV5+0 120 G VVL7AKP

EKV5+0 150 G VHV1NKR

Variant No. VDXTBGF VGCMAA5 VVL7AKP VHV1NKRCable cross-section 2 2 2 2




4. E

aS D

evic

es

716 001 ES YM2 16725 001 ES YM2 25735 001 ES YM2 35750 001 ES YM2 50770 001 ES YM2 70795 001 ES YM2 95712 001 ES YM2 120715 001 ES YM2 150

716 001 4013364010406 5-3-0 184 g 1 m725 001 4013364011793 5-3-0 207 g 1 m735 001 4013364011847 5-3-0 366 g 1 m750 001 4013364011809 5-3-0 535 g 1 m770 001 4013364011762 5-3-0 753 g 1 m795 001 4013364011816 5-3-0 1 kg 1 m712 001 4013364011823 5-3-0 1.23 kg 1 m715 001 4013364011830 5-3-0 1.52 kg 1 m

Type ES YM2 16 ES YM2 25 ES YM2 35 ES YM2 50Part No. 716 001 725 001 735 001 750 001Cable cross-section 2 2 2 2

PU

*) Please specify the length of the earthing cable when ordering (in whole metres)

General technical data:Minimum order quantity *)

Earthing Cable in accordance with IEC 61138The cable is delivered without crimped cable lugs and can be ordered by the metre.

Note:

*) Clamping range and cable cross-section of universal clamps used for:

Fixed ball point Ø

T PinCollar width

Rd / FlClamping range Cable cross-section

Max. short-circuit current

lK 0.5 s lK 1 s

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 16 mm2

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 25 mm2

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 35 mm2

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 50 mm2

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 70 mm2

20 / 25 / 30 mm 15 / 18 mm — 95 mm2

— / 25 / 30 mm — — 120 mm2

— — — 150 mm2

Type ES YM2 70 ES YM2 95 ES YM2 120 ES YM2 150Part No. 770 001 795 001 712 001 715 001Cable cross-section 2 2 2 2

PU



EaS

Dev

ices

772 310 KKH 20 SK772 320 KKH 25 SK

772 310 4013364057593 5-4-1 469 g 1 pc(s)772 320 4013364057432 5-4-1 785 g 1 pc(s)

Type KKH 20 SK KKH 25 SKPart No. 772 310 772 320

ØFor cable cross-sections 2 2

Max. short-circuit current Ik 0.5 s

Max. short-circuit current Ik 1 s

PU

Rigid Ball Head Cap, hexagon Shaft• Ø20/25 mm• PK1 anti-rotation element

772 311 KKH 20 SQ772 321 KKH 25 SQ

772 311 4013364057586 5-4-1 482 g 1 pc(s)772 321 4013364057449 5-4-1 756 g 1 pc(s)

Type KKH 20 SQ KKH 25 SQPart No. 772 311 772 321




PU

Rigid Ball Head Cap, T Pin Shaft• Ø20/25 mm• PK1 anti-rotation element

772 330 KKH 20 D SK772 340 KKH 25 D SK

772 330 4013364069220 5-4-1 560 g 1 pc(s)772 340 4013364057456 5-4-1 878 g 1 pc(s)

Type KKH 20 D SK KKH 25 D SKPart No. 772 330 772 340




PU

• Ø20/25 mm• PK1 anti-rotation element

772 331 KKH 20 D SQ772 341 KKH 25 D SQ

772 331 4013364066304 5-4-1 566 g 1 pc(s)772 341 4013364057425 5-4-1 902 g 1 pc(s)

Type KKH 20 D SQ KKH 25 D SQPart No. 772 331 772 341




PU

• Ø20/25 mm• PK1 anti-rotation element

715 312 RBK 35 SQ

715 312 4013364150386 5-4-1 1.5 kg 1 pc(s)

Type RBK 35 SQPart No. 715 312For round pins ØFor cable cross-sections 2



PU

Round Pin Clamp, T Pin Shaft• For round pins in switchgear installations• With PK 1 anti-rotation element

Connection elements in accordance with EN/IEC 61230 (DIN VDE 0683-100) for single-pole/three-pole earthing and short-circuiting cables•

Phase Connecting Elements for Switchgear Installations

EaS Configurator:

www.dehn.de/en/euk



4. E

aS D

evic

es

773 034 UK 25 SK773 130 UK 30 SK

773 034 4013364114562 5-4-1 634.4 g 1 pc(s)773 130 4013364057722 5-4-1 801 g 1 pc(s)

Type UK 25 SK UK 30 SKPart No. 773 034 773 130

ØFor cable cross-sections 16 ... 120*) 2 16 ... 120*) 2



PU

Universal Clamp, hexagon Shaft• Ø20/25 mm or Ø• PK1 anti-rotation element

773 234 UK 25 SQ773 330 UK 30 SQ

773 234 4013364114555 5-4-1 660.6 g 1 pc(s)773 330 4013364057760 5-4-1 830 g 1 pc(s)

Type UK 25 SQ UK 30 SQPart No. 773 234 773 330

ØFor cable cross-sections 16 ... 120*) 2 16 ... 120*) 2



PU

*) see table (page 41) for clamping range and maximum cable cross-section for universal clamps

Universal Clamp, T Pin Shaft• Ø20/25 mm or Ø• PK1 anti-rotation element

771 316 PAS EK SQ 16

771 316 4013364150393 5-4-1 418 g 1 pc(s)

Type PAS EK SQ 16Part No. 771 316For cable cross-sections 2



PU

Phase Connecting Element, T Pin Shaft• With M16 threaded pin for installation in switchgear installations• PK1 anti-rotation element

784 201 PSK 4 30 SQL784 301 PSK 10 65 SQL

784 201 4013364006591 5-4-1 880 g 1 pc(s)784 301 4013364006553 5-4-1 1.7 kg 1 pc(s)

Type PSK 4 30 SQL PSK 10 65 SQLPart No. 784 201 784 301Clamping range ØFor cable cross-sections 2 2


Standard Phase Screw Clamp• PK1 anti-rotation element and long threaded T pin shaft

784 401 PSK 4 30 SQL EH784 501 PSK 10 65 SQL EH

784 401 4013364006614 5-4-1 1.3 kg 1 pc(s)784 501 4013364006560 5-4-1 1.95 kg 1 pc(s)

Type PSK 4 30 SQL EH PSK 10 65 SQL EHPart No. 784 401 784 501Clamping range ØFor cable cross-sections 2 2


Phase Screw Clamp with Coupling Aid• PK1 anti-rotation element and long threaded T pin shaft

Connection elements in accordance with EN/IEC 61230 (DIN VDE 0683-100) for single-pole/three-pole earthing and short-circuiting cables•

Phase Connecting Elements for Overhead Lines

EaS Configurator:

www.dehn.de/en/euk



EaS

Dev

ices

784 480 PSK FV 4 30 SQL

784 480 4013364054479 5-4-1 600 g 1 pc(s)

Type PSK FV 4 30 SQLPart No. 784 480Clamping range ØFor cable cross-sections 2


Spring-loaded Phase Screw Clamp• PK1 anti-rotation element and long threaded T pin shaft

784 085 PSK 10 85 SQL

784 085 4013364018686 5-4-1 872 g 1 pc(s)

Type PSK 10 85 SQLPart No. 784 085Clamping range ØFor cable cross-sections 2


Phase Screw Clamp with Wide Clamping Range• PK1 anti-rotation element and long threaded T pin shaft

784 032 PSK 10 32 SQL

784 032 4013364018679 5-4-1 969.4 g 1 pc(s)

Type PSK 10 32 SQLPart No. 784 032Clamping range ØFor cable cross-sections 2


Phase Screw Clamp• PK2 anti-rotation element and long threaded T pin shaft

784 038 PSK 10 32 SQL SB

784 038 4013364138452 5-4-1 1.01 kg 1 pc(s)

Type PSK 10 32 SQL SBPart No. 784 038Clamping range ØFor cable cross-sections 2


Phase Screw Clamp with Safety Bow• PK2 anti-rotation element, long threaded T pin shaft and additional safety bow

784 490 PK FV 4 25

784 490 4013364118812 5-4-1 533 g 3 pc(s)

Type PK FV 4 25Part No. 784 490Clamping range ØFor cable cross-sections 2


Spring-Loaded Phase Clamp• For use with single-pole or three-pole coupling aid• For single-pole / three-pole earthing and short-circuiting cables with PK1 crimped cable lug

784 461 EH1 PK FV ZK

784 461 4013364118799 5-4-1 1.28 kg 1 pc(s)

Type EH1 PK FV ZKPart No. 784 461Total lengthPU

Accessories for spring-loaded Phase Connecting Elements

Single-pole Coupling Aid with Gear CouplingFor ISMTC N 36 ZK 10600 telescopic sticks for use from the ground.



4. E

aS D

evic

es

784 463 EH3 PK FV SQL

784 463 4013364118805 5-4-1 1.62 kg 1 pc(s)

Type EH3 PK FV SQLPart No. 784 463Total lengthPU

Accessories for spring-loaded Phase Connecting Elements

Three-pole Coupling Aid with T Pin ShaftFor earthing sticks with bayonet locking mechanism for use from towers or aerial working platforms

772 314 KKH 20 SQL772 324 KKH 25 SQL

772 314 4013364080171 5-4-1 446 g 1 pc(s)772 324 4013364080188 5-4-1 719 g 1 pc(s)

Type KKH 20 SQL KKH 25 SQLPart No. 772 314 772 324



Rigid Ball Head Cap• Ø20/25 mm• PK1 anti-rotation element

773 236 UK 25 SQL773 331 UK 30 SQL

773 236 4013364114579 5-4-1 713.5 g 1 pc(s)773 331 4013364069244 5-4-1 793 g 1 pc(s)

Type UK 25 SQL UK 30 SQLPart No. 773 236 773 331

ØRd / Fl clamping rangeFor cable cross-sections 16 ... 120*) 2 16 ... 120*) 2


*) See table (page 41) for clamping ranges and maximum cable cross-sections of universal clamps

Universal Clamp• Ø20/25 mm or Ø• PK1 anti-rotation element

728 312 PAP 2 M12 SSM B13

728 312 4013364128712 5-3-1 270 g 1 pc(s)

Type PAP 2 M12 SSM B13Part No. 728 312Max. short-circuit current Ik 0.5 s


PU

Accessories for Phase Connecting Elements for Overhead Lines

Two-pole Phase Connecting Plate

728 313 PAP 3 M12 SSM B13 RB

728 313 4013364157132 5-3-1 612 g 1 pc(s)

Type PAP 3 M12 SSM B13 RBPart No. 728 313Max. short-circuit current Ik 0.5 s Max. short-circuit current Ik 1 s PU

Three-pole Phase Connecting Plate with Round PinPhase connecting plate for phase clamps.



EaS

Dev

ices

784 755 FEK 4 15 TS FSQL784 756 FEK4 15 TS FSQL AB29

784 755 4013364054202 5-5-2 1.54 kg 1 pc(s)784 756 4013364230118 5-5-2 1.6 kg 1 pc(s)

Type FEK 4 15 TS FSQL FEK4 15 TS FSQL AB29Part No. 784 755 784 756 +Clamping range ØFor cable material Cu AlFor cable cross-section 50 mm2 70 mm2

DB material No. —PU

Earth Clamp for Overhead Contact LinesFor 80 a.c. to 120 a.c. overhead contact lines • • PK2 anti-rotation element, with M10 bolt

784 352 LK 4 40 TS SQL

784 352 4013364006072 5-5-2 806 g 1 pc(s)

Type LK 4 40 TS SQLPart No. 784 352Clamping range ØDB material No.PU

Conductor ClampFor line feeders and traction current lines• With contact electrode and threaded T pin shaft according to DIN 48087• PK2 anti-rotation element, with M10 bolt

799 009 ES 3P FL ER

799 009 4013364123298 5-4-4 5.1 kg 1 pc(s)

Type ES 3P FL ERPart No. 799 009Total length (lG)PU

Earthing KitFor three-pole earthing devices.

644 000 ERO BSP ASSM10 1000 STTZN

644 000 4013364030268 3-7-1 4.45 kg 1 pc(s)Type ERO BSP ASSM10 1000 STTZNPart No. 644 000Length (drill)Military NameStock No. 5975-12-120-0006PU

Accessories for Earthing Kit

Tubular earth electrode with drill

799 019 ESS 3P M10 FM

799 019 4013364123304 5-4-4 328 g 1 pc(s)

Type ESS 3P M10 FMPart No. 799 019DimensionsBolt 3x M10 x 35 mmPU

Three-pole Earthing BusbarWith slot for mounting the earthing busbar on the tubular earth electrode, for hook-type cable lugs of type PK3

12

3

1

2

Kit includes:Pos. Part No. Pos. Part No.1 644 000 3 766 6012 799 019For more detailed information on

chapter.

Phase Connecting Elements for Railway Applications

Earthing kits are connection elements connecting earthing and short-circuiting cables or bars to the ground either directly or via connecting links.

Earthing Kit



4. E

aS D

evic

es

799 006 ESP HVS 1500

799 006 4013364157347 5-1-8 4 kg 1 pc(s)

Type ESP HVS 1500Part No. 799 006Total length (lG)BoltPU

Earth SpikeWith M12 connection bolt.

774 034 UEK 25 FS774 130 UEK 30 FS

774 034 4013364114586 5-4-1 661.6 g 1 pc(s)774 130 4013364057739 5-4-1 780 g 1 pc(s)

Type UEK 25 FS UEK 30 FSPart No. 774 034 774 130Rd / Fl clamping rangeFor cable cross-sections 16 ... 120*) 2 16 ... 120*) 2


*) See table (page 41) for clamping ranges and maximum cable cross-sections of universal clamps.

Universal Clamp with Wing Bolt• Ø20/25 mm or Ø• PK1 anti-rotation element

774 234 UEK 25 HG774 330 UEK 30 HG

774 234 4013364114593 5-4-1 771.6 g 1 pc(s)774 330 4013364057715 5-4-1 941 g 1 pc(s)

Type UEK 25 HG UEK 30 HGPart No. 774 234 774 330Rd / Fl clamping rangeFor cable cross-sections 16 ... 120*) 2 16 ... 120*) 2



Universal Clamp with Handle• Ø20/25 mm or Ø• PK1 anti-rotation element

774 434 UEK 25 SKN774 530 UEK 30 SKN

774 434 4013364114609 5-4-1 712 g 1 pc(s)774 530 4013364057746 5-4-1 700 g 1 pc(s)

Type UEK 25 SKN UEK 30 SKNPart No. 774 434 774 530Rd / Fl clamping rangeFor cable cross-sections 16 ... 120*) 2 16 ... 120*) 2



Universal Clamp with Tommy Bar• Ø20/25 mm or Ø• PK1 anti-rotation element

Earth Spike

Connection elements in accordance with EN/IEC 61230 (DIN VDE 0683-100) for single-pole/three-pole earthing and short-circuiting cables.•

Earth Connecting Elements for Switchgear Installations and Overhead Lines

EaS Configurator:

www.dehn.de/en/euk



EaS

Dev

ices

772 312 KKH 20 FS772 322 KKH 25 FS

772 312 4013364054431 5-4-1 480 g 1 pc(s)772 322 4013364054455 5-4-1 747 g 1 pc(s)

Type KKH 20 FS KKH 25 FSPart No. 772 312 772 322For cable cross-sections 2 2


Rigid Ball Head Cap with Wing Bolt• Ø20/25 mm • PK1 anti-rotation element

772 313 KKH 20 HG772 323 KKH 25 HG

772 313 4013364054448 5-4-1 400 g 1 pc(s)772 323 4013364054462 5-4-1 876 g 1 pc(s)

Type KKH 20 HG KKH 25 HGPart No. 772 313 772 323For cable cross-sections 2 2


Rigid Ball Head Cap with Handle• Ø20/25 mm • PK1 anti-rotation element

775 621 EAS EK FM 12775 631 EAS EK FM 16

775 621 4013364102545 5-4-4 311 g 1 pc(s)775 631 4013364102552 5-4-4 290 g 1 pc(s)

Type EAS EK FM 12 EAS EK FM 16Part No. 775 621 775 631For cable cross-sections 2 2


Earth Connecting Element with Wing Nut• For connecting elements M12/M16• PK1 anti-rotation element

775 626 EAS EK FS 12775 636 EAS EK FS 16

775 626 4013364102569 5-4-4 343 g 1 pc(s)775 636 4013364102576 5-4-4 350 g 1 pc(s)

Type EAS EK FS 12 EAS EK FS 16Part No. 775 626 775 636For cable cross-sections 2 2


Earth Connecting Element with Wing Bolt • For connecting elements M12/M16• PK1 anti-rotation element

790 150 EAB RN 16 FS

790 150 4013364005365 5-4-1 450 g 1 pc(s)

Type EAB RN 16 FSPart No. 790 150For cable cross-sections 16 ... 150*) 2


*) For cable lengths > 4000 mm: max. up to 95 mm2

Earth Bushing with Wing Bolt• Ø16 mm • PK1 anti-rotation element

790 160 EAB RN 16 SKN

790 160 4013364018693 5-4-1 737.4 g 1 pc(s)

Type EAB RN 16 SKNPart No. 790 160For cable cross-sections 16 ... 150**) 2


**) k of 1 s.

Earth Bushing with Tommy Bar• Ø16 mm • PK1 anti-rotation element



4. E

aS D

evic

es

792 190 EFK FL40 SKN

792 190 4013364068315 5-4-1 1.2 kg 1 pc(s)

Type EFK FL40 SKNPart No. 792 190For cable cross-sections 2


• • PK1 anti-rotation element

792 030 EFK FL30 SKN

792 030 4013364005853 5-4-1 610 g 1 pc(s)

Type EFK FL30 SKNPart No. 792 030For cable cross-sections 2


Earth Milling Clamp with Tommy Bar • • PK1 anti-rotation element

Earth Connecting Elements for Railway Applications792 450 SAK PFE KN792 451 SAK PFE KN AB29

792 450 4013364051744 5-5-2 2.95 kg 1 pc(s)792 451 4013364230170 5-5-2 2.6 kg 1 pc(s)

Type SAK PFE KN SAK PFE KN AB29Part No. 792 450 792 451 +Cable material Cu AlCable cross-section 50 mm2 70 mm2

Max. short-circuit current Ik 0.06 sDB material No. —PU

Clamp for Railway Tracks with Tommy Bar

• With detachable tommy bar (locking spring)• PK2 anti-rotation element, with M10 bolt

792 453 SAK PFE RA792 454 SAK PFE RA AB29

792 453 4013364054226 5-5-2 2.95 kg 1 pc(s)792 454 4013364230194 5-5-2 2.94 kg 1 pc(s)

Type SAK PFE RA SAK PFE RA AB29Part No. 792 453 792 454 +Cable material Cu AlCable cross-section 50 mm2 70 mm2

Max. short-circuit current Ik 0.06 sDB material No. —PU

Clamp for Railway Tracks with Ratchet

• With detachable ratchet• PK2 anti-rotation element, with M10 bolt

773 251 UK K25 FL30 SQL

773 251 4013364005990 5-5-2 901 g 1 pc(s)

Type UK K25 FL30 SQLPart No. 773 251Clamping rangeMax. short-circuit current Ik 0.06 sDB material No.PU

Universal Clamp, T Pin ShaftØ25 mm

• PK2 anti-rotation element, with M10 bolt

774 251 UK K25 FL30 HG

774 251 4013364006003 5-5-2 955 g 1 pc(s)

Type UK K25 FL30 HGPart No. 774 251Clamping rangeMax. short-circuit current Ik 0.06 sDB material No.PU

Universal Clamp with HandleØ25 mm

• PK2 anti-rotation element, with M10 bolt



EaS

Dev

ices

Earthing sticks or earthing handle for installing portable earthing and short-circuiting devices ( single-pole/three-pole devices and short-cir-cuiting bars) to power installations or installations up to 1000 V in accordance with EN 50110 (DIN VDE 0105-100).

Earthing Sticks for Switchgear Installations

761 010 ES SK 1000761 015 ES SK 1500

761 010 4013364000155 5-3-3 980 g 1 pc(s)761 015 4013364000162 5-3-3 1.35 kg 1 pc(s)

Type ES SK 1000 ES SK 1500Part No. 761 010 761 015Total length (lG)Length (handle) (IH)Max. load on the operating headPU

For Hexagon Shafts• Handle termination with end cap

761 011 ES SQ 1000761 016 ES SQ 1500

761 011 4013364000230 5-3-3 1.05 kg 1 pc(s)761 016 4013364000247 5-3-3 1.36 kg 1 pc(s)

Type ES SQ 1000 ES SQ 1500Part No. 761 011 761 016Total length (lG)Length (handle) (IH)Max. load on the operating headPU

For T Pin Shafts• Handle termination with end cap

761 001 ES SK STK 1000761 003 ES SK STK 2000

761 001 4013364125179 5-3-3 400 g 1 pc(s)761 003 4013364134348 5-3-3 840 g 1 pc(s)

Type ES SK STK 1000 ES SK STK 2000Part No. 761 001 761 003Total length (lG)Length (handle) (IH)Max. load on the operating headPU

For Hexagon Shafts, Plug-in Coupling• Handle termination with plastic plug-in coupling for extending

the handle

761 002 ES SQ STK 1000761 004 ES SQ STK 2000

761 002 4013364125186 5-3-3 400 g 1 pc(s)761 004 4013364134355 5-3-3 1.99 kg 1 pc(s)

Type ES SQ STK 1000 ES SQ STK 2000Part No. 761 002 761 004Total length (lG)Length (handle) (IH)Max. load on the operating headPU

For T Pin Shafts, Plug-in Coupling• Handle termination with plastic plug-in coupling for extending

the handle

761 070 EST SK STK 920

761 070 4013364136212 5-3-3 800 g 1 pc(s)

Type EST SK STK 920Part No. 761 070Total length (lG)Length (handle) (IH)Max. load on the operating headPU

Two-part, for Hexagon Shafts• Handle termination with plastic plug-in coupling for extending

the handle

761 075 EST SQ STK 920

761 075 4013364136229 5-3-3 800 g 1 pc(s)

Type EST SQ STK 920Part No. 761 075Total length (lG)Length (handle) (IH)Max. load on the operating headPU

Two-part, for T Pin Shafts• Handle termination with plastic plug-in coupling for extending

the handle



4. E

aS D

evic

es

765 001 AD ES SQ SK

765 001 4013364051805 5-1-8 189.8 g 1 pc(s)

Type AD ES SQ SKPart No. 765 001LengthPU

Accessories for Earthing Sticks for Switchgear Installations

Suitable for insertion into earthing sticks with coupling for T pin shafts (bayonet locking mechanism) to accept clamps with hexagon shaft.

765 006 AD ES SQ SQL

765 006 4013364156104 5-1-8 315 g 1 pc(s)

Type AD ES SQ SQLPart No. 765 006LengthPU

Suitable for insertion into earthing sticks with aluminium cone coupling for T pin shafts (bayonet locking mechanism) to accept clamps with T pin shaft.

Earthing sticks for mounting portable earthing and short-circuiting devices (single-pole/three-pole devices) on outdoor switchgear installa-tions and overhead lines in accordance with EN 50110 (DIN VDE 0105-100).• • • Positive aluminium threaded coupling

Earthing Sticks for Overhead Lines

769 400 ESTC SQL 4000769 500 ESTC SQL 5000

769 400 4013364080881 5-4-2 3.68 kg 1 pc(s)769 500 4013364080904 5-4-2 4.68 kg 1 pc(s)

Type ESTC SQL 4000 ESTC SQL 5000Part No. 769 400 769 500Total length (lG max / IG min)Length (handle) (IH)Max. load on the operating head (lG max / IG min)DiameterPU

Telescopic, for T Pin Shafts

769 300 ESTC SQL STK 3000

769 300 4013364080867 5-4-2 2.8 kg 1 pc(s)

Type ESTC SQL STK 3000Part No. 769 300Total length (lG max / IG min)Length (handle) (IH)Max. load on the operating head (lG max / IG min)DiameterPU

Telescopic, for T Pin Shafts, Plug-in Coupling

769 503 EST KS SQL 1500

769 503 4013364003996 5-4-2 1.64 kg 1 pc(s)

Type EST KS SQL 1500Part No. 769 503Total length (lG)DiameterPU

Multi-part, Top Section

1 Permissible loads for the earthing sticks:

Length lG Pos. No. Max. load on the

operating head

6000 mm 1+2+2+3 8 kg4500 mm 1+2+3 15 kg3000 mm 1+3 30 kg1500 mm 1 35 kg



EaS

Dev

ices

769 506 EST SQL RW 4915 TA

769 506 4013364120938 5-5-2 6.5 kg 1 pc(s)

Type EST SQL RW 4915 TAPart No. 769 506Total length (lG max / IG min)Max. load on the operating head (lG max / IG min)DB material No.PU

Six-part, for T Pin Shafts, with Plastic CouplingFor threaded T pin shafts (bayonet locking mechanism).

Kit includes:Pos. Part No. Pos. Part No.1 1x 766 074 4 1x 766 0792 2x 766 076 5 1x 766 8893 1x 766 078 6 1x 769 509For more detailed information

on these products,

2

3

769 504 EST ZS 1500

769 504 4013364004559 5-4-2 1.6 kg 1 pc(s)

Type EST ZS 1500Part No. 769 504Total length (lG)DiameterPU

Multi-part, Intermediate SectionWith aluminium threaded coupling, connector with nut and bushing.

769 505 EST ES 1500

769 505 4013364004566 5-4-2 1.46 kg 1 pc(s)

Type EST ES 1500Part No. 769 505Total length (lG)DiameterPU

Multi-part, End Fitting

Permissible loads for the earthing sticks:

Length lG Pos. No. Max. load on the

operating head

6000 mm 1+2+2+3 8 kg4500 mm 1+2+3 15 kg3000 mm 1+3 30 kg1500 mm 1 35 kg

Earthing Sticks for Railway Applications

769 352 ESTC SQL RW 3500769 502 ESTC SQL RW 5000

769 352 4013364007345 5-5-2 4.8 kg 1 pc(s)769 502 4013364004542 5-5-2 5.6 kg 1 pc(s)

Type ESTC SQL RW 3500 ESTC SQL RW 5000Part No. 769 352 769 502Total length (lG max / IG min)Max. load on the operating head (lG max / IG min)DB material No.PU

Telescopic Earthing Stick for T PinsFor threaded T pin shafts (bayonet locking mechanism).

769 508 ESTC SQL H RW 5000

769 508 4013364052383 5-5-2 4.5 kg 1 pc(s)

Type ESTC SQL H RW 5000Part No. 769 508Total length (lG max / IG min)Max. load on the operating head (lG max / IG min)DB material No.PU

Telescopic Earthing Stick for T Pins with Cable EntryFor threaded T pin shafts (bayonet locking mechanism).

1

2

2

3

465



4. E

aS D

evic

es

769 515 EST SQL RW 4855 TA

769 515 4013364157361 5-5-2 6.9 kg 1 pc(s)

Type EST SQL RW 4855 TAPart No. 769 515 +Total length (lG max / IG min)Max. load on the operating head (lG max / IG min)PU

Six-part, for T Pin Shafts, Aluminium CouplingFor threaded T pin shafts (bayonet locking mechanism).

Earthing and Short-Circuiting DevicesEaS Configurator:

www.dehn.de/en/euk

1800 mm

600 mm

1

2

2

3

45

Kit includes:Pos. Part No. Pos. Part No.1 1x 769 516 4 1x 769 5192 2x 769 517 5 1x 769 5093 1x 769 518For more detailed information

on these products,

Available again

VGJD2QX EKV3+1 16 G VGJD2QXVRDSN66 EKV3+1 16 G VGJD2QXV3WJMYY EKV3+1 35 G V3WJMYYVU8P6LE EKV3+1 50 G VU8P6LEVCEY1U6 EKV3+1 70 G VCEY1U6VA3926U EKV3+1 95 G VA3926UVAB3PJV EKV3+1 120 G VAB3PJVV1KPXFR EKV3+1 150 G V1KPXFR

VGJD2QX 4013364165373 5-4-0 10 kg 1 pc(s)VRDSN66 4013364165373 5-4-0 10 kg 1 pc(s)V3WJMYY 4013364163676 5-4-0 3.65 kg 1 pc(s)VU8P6LE 4013364165380 5-4-0 4.38 kg 1 pc(s)VCEY1U6 4013364165397 5-4-0 5.33 kg 1 pc(s)

V1KPXFR 4013364165427 5-4-0 9.85 kg 1 pc(s)

Type EKV3+1 16 G VGJD2QX

EKV3+1 16 G VGJD2QX

EKV3+1 35 G V3WJMYY

EKV3+1 50 G VU8P6LE

Variant No. VGJD2QX VRDSN66 V3WJMYY VU8P6LEPhase cable end

ØCable cross-section 2 2 2 2


EaS Configurator:

www.dehn.de/en/euk

General technical data:Earth cable end

Three-pole, same Cable Cross-Section with Ball Head Caps

Type EKV3+1 70 G VCEY1U6

EKV3+1 95 G VA3926U

EKV3+1 120 G VAB3PJV

EKV3+1 150 G V1KPXFR

Variant No. VCEY1U6 VA3926U VAB3PJV V1KPXFRPhase cable end

ØCable cross-section 2 2 2 2




EaS

Dev

ices

1800 mm

600 mm

V8MCNWM EKV3+1 16 G V8MCNWMV8VF7CP EKV3+1 25 G V8VF7CPV5VN56Z EKV3+1 35 G V5VN56ZVPH98CT EKV3+1 50 G VPH98CTVMLM2BZ EKV3+1 70 G VMLM2BZVE9HQHJ EKV3+1 95 G VE9HQHJVKZLVU3 EKV3+1 120 G VKZLVU3

V8MCNWM 4013364165441 5-4-0 10 kg 1 pc(s)V8VF7CP 4013364165458 5-4-0 6.29 kg 1 pc(s)V5VN56Z 4013364165465 5-4-0 4.81 kg 1 pc(s)VPH98CT 4013364165472 5-4-0 6.29 kg 1 pc(s)VMLM2BZ 4013364165489 5-4-0 6.47 kg 1 pc(s)VE9HQHJ 4013364165496 5-4-0 7.91 kg 1 pc(s)VKZLVU3 4013364165502 5-4-0 7.9 kg 1 pc(s)

Type EKV3+1 16 G V8MCNWM

EKV3+1 25 G V8VF7CP

EKV3+1 35 G V5VN56Z

EKV3+1 50 G VPH98CT

Variant No. V8MCNWM V8VF7CP V5VN56Z VPH98CTCable cross-section 2 2 2 2


EaS Configurator:

www.dehn.de/en/euk

General technical data:Phase cable endEarth cable end

ØFor T pins with a collar width ofRd / Fl clamping range

Three-pole, same Cable Cross-Section with Universal Clamp

1800 mm

s)) 600 mm

VD28FAD EKV3+1 50 R VD28FADVQYP8B2 EKV3+1 70 R VQYP8B2V5SVXPH EKV3+1 95 R V5SVXPHVTSY9XH EKV3+1 120 R VTSY9XHVHBWUNH EKV3+1 150 R VHBWUNH

VQYP8B2 4013364163195 5-4-0 7.15 kg 1 pc(s)V5SVXPH 4013364164727 5-4-0 6.33 kg 1 pc(s)VTSY9XH 4013364163621 5-4-0 6.4 kg 1 pc(s)VHBWUNH 4013364163645 5-4-0 7.86 kg 1 pc(s)

Type EKV3+1 50 R VD28FAD

EKV3+1 70 R VQYP8B2

EKV3+1 95 R V5SVXPH

Variant No. VD28FAD VQYP8B2 V5SVXPHPhase cable end

ØCable cross-section 2 2 2


EaS Configurator:

www.dehn.de/en/euk

General technical data:Earth cable end

Three-pole, reduced Cable Cross-Section with Ball Head Caps

Type EKV3+1 120 R VTSY9XH EKV3+1 150 R VHBWUNHVariant No. VTSY9XH VHBWUNHPhase cable end

ØCable cross-section 2 2


Type EKV3+1 70 G VMLM2BZ

EKV3+1 95 G VE9HQHJ

EKV3+1 120 G VKZLVU3

Variant No. VMLM2BZ VE9HQHJ VKZLVU3Cable cross-section 2 2 2




4. E

aS D

evic

es

VMBDCM1 EKV3+1 50 R VMBDCM1V4RJ7A2 EKV3+1 70 R V4RJ7A2VRAB9WB EKV3+1 95 R VRAB9WBVACNLP8 EKV3+1 120 R VACNLP8

VMBDCM1 4013364165519 5-4-0 5.09 kg 1 pc(s)

Type EKV3+1 50 R VMBDCM1

EKV3+1 70 R V4RJ7A2

EKV3+1 95 R VRAB9WB

EKV3+1 120 R VACNLP8

Variant No. VMBDCM1 V4RJ7A2 VRAB9WB VACNLP8Phase cable endEarth cable end

ØFor T pins with a collar width ofRd / Fl clamping rangeCable cross-section 2 2 2 2


EaS Configurator:

www.dehn.de/en/euk

Three-pole, reduced Cable Cross-Section with Universal Clamp

1800 mm

600 mm

5000 mm

VE5E8FZ EKV1+1 16 VE5E8FZVF33XR2 EKV1+1 25 VF33XR2V43FCV8 EKV1+1 35 V43FCV8V2KWXUL EKV1+1 50 V2KWXULVRP32FL EKV1+1 70 VRP32FLV2WPYVF EKV1+1 95 V2WPYVFVG4GXHQ EKV1+1 120 VG4GXHQ

VE5E8FZ 4013364165557 5-4-0 10 kg 1 pc(s)VF33XR2 4013364165564 5-4-0 10 kg 1 pc(s)V43FCV8 4013364165571 5-4-0 10 kg 1 pc(s)V2KWXUL 4013364165588 5-4-0 10 kg 1 pc(s)VRP32FL 4013364165595 5-4-0 10 kg 1 pc(s)V2WPYVF 4013364165601 5-4-0 8.06 kg 1 pc(s)VG4GXHQ 4013364165618 5-4-0 10 kg 1 pc(s)

Type EKV1+1 16 VE5E8FZ

EKV1+1 25 VF33XR2

EKV1+1 35 V43FCV8

EKV1+1 50 V2KWXUL

Variant No. VE5E8FZ VF33XR2 V43FCV8 V2KWXULPhase cable endEarth cable endClamping range ØCable cross-section 2 2 2 2


EaS Configurator:

www.dehn.de/en/euk

Single-pole with Phase Screw Clamp

Type EKV1+1 70 VRP32FL

EKV1+1 95 V2WPYVF

EKV1+1 120 VG4GXHQ

Variant No. VRP32FL V2WPYVF VG4GXHQPhase cable endEarth cable endClamping range ØCable cross-section 2 2 2




EaS

Dev

ices

5000 mm

Earthing and short-circuiting devices in accordance with EN/IEC 61230 (DIN VDE 0683-100) for earthing and short-circuiting electrical instal-lations at the work location in accordance with EN 50110 (DIN VDE 0105-100).

Kits for Railway Applications

Parts list:Pos. Part No. Pos. Part No.1 784 755 11 750 2022 773 251 12 740 1243 784 352 13 769 5024 772 320 14 769 5085 792 450 15 769 5066 792 453 16 769 3527 774 251 17 761 0158 751 085 18 785 1119 751 120 19 700 000

10 751 040

750 210 BEV OL NPF K750 218 BEV OL NPF R

750 210 4013364123793 5-5-0 13.44 kg 1 pc(s)750 218 4013364157224 5-5-0 14.73 kg 1 pc(s)

Type BEV ... OL NPF K OL NPF RPart No. 750 210 750 218DesignCable cross-section 2 2

Cable lengthDB material No. —PU


Tommy bar (K) or ratchet (R)EKV K 50 8500 1x 751 086 1+5+8EKV R 50 8500 1x 751 087 1+6+8

ESTC SQL RW 5000 1x 769 502 13

1

13

8

5

6

VMZDL8N EKV1+1 16 VMZDL8NVB1DETL EKV1+1 25 VB1DETLV8PPJEF EKV1+1 35 V8PPJEFVQY44GL EKV1+1 50 VQY44GLVFZ17TJ EKV1+1 70 VFZ17TJVWBDMPS EKV1+1 95 VWBDMPSV3CM9FR EKV1+1 120 V3CM9FR

VMZDL8N 4013364165625 5-4-0 10 kg 1 pc(s)VB1DETL 4013364165632 5-4-0 10 kg 1 pc(s)V8PPJEF 4013364165649 5-4-0 10 kg 1 pc(s)VQY44GL 4013364165656 5-4-0 10 kg 1 pc(s)VFZ17TJ 4013364165663 5-4-0 10 kg 1 pc(s)VWBDMPS 4013364165670 5-4-0 10 kg 1 pc(s)V3CM9FR 4013364165687 5-4-0 8.32 kg 1 pc(s)

Type EKV1+1 16 VMZDL8N

EKV1+1 25 VB1DETL

EKV1+1 35 V8PPJEF

EKV1+1 50 VQY44GL

Variant No. VMZDL8N VB1DETL V8PPJEF VQY44GLCable cross-section 2 2 2 2


EaS Configurator:

www.dehn.de/en/euk

General technical data:Phase cable endEarth cable end

ØFor T pins with a collar width ofRd / Fl clamping range

Single-pole with Universal Clamp

Type EKV1+1 70 VFZ17TJ

EKV1+1 95 VWBDMPS

EKV1+1 120 V3CM9FR

Variant No. VFZ17TJ VWBDMPS V3CM9FRCable cross-section 2 2 2




4. E

aS D

evic

es

750 211 BEV OL PF K750 219 BEV OL PF R

750 211 4013364123809 5-5-0 15.55 kg 1 pc(s)750 219 4013364157231 5-5-0 16.87 kg 1 pc(s)

Type BEV ... OL PF K OL PF RPart No. 750 211 750 219DesignCable cross-section 2 2


*)


Tommy bar (K) or ratchet (R)EKV K H 50 12000 1x 751 121 1+5+9+12EKV R H 50 12000 1x 751 122 1+6+9+12ESTC SQL RW 5000 1x 769 502 13

1

13

9

12

5

6

750 196 BEV OL NPF PKW K750 216 BEV OL NPF PKW R

750 196 4013364123823 5-5-0 26.58 kg 1 pc(s)750 216 4013364157255 5-5-0 26.58 kg 1 pc(s)

Type BEV ... OL NPF PKW K OL NPF PKW RPart No. 750 196 750 216DesignCable cross-section 2 2


For technical emergency service and emergency managementTelescopic earthing stick kit consisting of six elements, pluggable (max. 5 m long).



1x 769 506 15STT 55 27 30 1x 785 111 18

1

15

8

5

6

18



EaS

Dev

ices

750 214 BEV OL PF V2 K750 221 BEV OL PF V2 R

750 214 4013364123816 5-5-0 15.6 kg 1 pc(s)750 221 4013364157248 5-5-0 15.51 kg 1 pc(s)

Type BEV ... OL PF V2 K OL PF V2 RPart No. 750 214 750 221DesignCable cross-section 2 2


*)

Telescopic earthing stick with cable entry and suspension hook (max. 5 m long).



ESTC SQL H RW 5000 1x 769 508 14

1

14

9

5

6

750 200 BEV OL PF PKW K750 217 BEV OL PF PKW R

750 200 4013364123830 5-5-0 16.95 kg 1 pc(s)750 217 4013364157262 5-5-0 17.08 kg 1 pc(s)

Type BEV ... OL PF PKW K OL PF PKW RPart No. 750 200 750 217DesignCable cross-section 2 2

Cable lengthPU

*)

For technical emergency service and emergency managementTelescopic earthing stick kit consisting of six elements, pluggable (max. 5 m long).


Tommy bar (K) or ratchet (R)EKV K H 50 12000 2x 751 121 1+5+9+12EKV R H 50 12000 2x 751 122 1+6+9+12

2x 769 506 15STT 55 27 30 1x 785 111 18

1

15

9

5

6

12

18



4. E

aS D

evic

es

750 215 BEV WHA ZVA

750 215 4013364123878 5-6-3 7.3 kg 1 pc(s)

Type BEV ... WHA ZVAPart No. 750 215Cable cross-section 2

DB material No.PU

For voltage detectors for electric point heating systems, please refer to the PHE voltage detector chapter.

Kit for electric Point and Train Pre-Heating SystemsFor the initial equipment of a transformer of electric point and train pre-heating systems.

Kit includes:Type Part No. Pos. Nr.

EKV2 50 KKH 600 1800 2x 751 150 4 (3x)+11ES SK 1500 1x 761 015 17

HV EKV ES30 1x 700 000 19

4

44

19

11

17

750 212 BEV US OL ST

750 212 4013364123847 5-5-1 13 kg 1 pc(s)

Type BEV ... US OL STPart No. 750 212Cable cross-section 2

Cable lengthDB material No.PU

Kit for Transformers at Overhead Line TowersFor earthing on fuse carriers


EKV UK 50 4000 2x 750 041 2+7+10ESTC SQL RW 3500 1x 769 352 16

2

16

710

750 213 BEV SVUL

750 213 4013364123861 5-5-1 8.76 kg 1 pc(s)

Type BEV ... SVULPart No. 750 213Cable cross-section 2

Cable lengthDB material No.PU

Kit for Supply Lines, Line Feeders, Bypass Lines and other Types of LinesFor earthing the supply line and traction current lines


EKV LK 50 4000 1x 750 042 3+7+10ESTC SQL RW 3500 1x 769 352 16

3

16

710



EaS

Dev

ices


Earthing and Short-Circuiting Devices for Railway Applications

751 086 EKV K 50 8500751 126 EKV K 50 12000751 121 EKV K H 50 12000752 086 EKV FD K 70 8500AL752 126 EKV FD K 70 12000AL752 121 EKV FD K H70 12000AL

751 086 4013364126626 5-5-0 8.99 kg 1 pc(s)751 126 4013364126664 5-5-0 10.88 kg 1 pc(s)751 121 4013364126640 5-5-0 11.14 kg 1 pc(s)752 086 4013364230217 5-5-0 7.02 kg 1 pc(s)752 126 4013364230262 5-5-0 8.05 kg 1 pc(s)752 121 4013364230316 5-5-0 8.32 kg 1 pc(s)

Type EKV K 50 8500 EKV K 50 12000 EKV K H 50 12000Part No. 751 086 751 126 751 121Material (cable) Cu Cu CuCable cross-section 2 2 2

Cable lengthHook — — 3

DB drawing No.PU

With Earth Clamp for Overhead Contact Lines and Clamp for Railway Tracks with Tommy BarParts list:Pos. Part No. Pos. Part No.1 784 755 8 Cu 751 0852 773 251 8 752 0853 784 352 9 Cu 751 1204 772 320 9 752 1205 792 450 10 751 0406 792 453 11 750 2027 774 251 12 740 124

1

512

1

6

8/9

8/912

Type EKV FD K 70 8500AL

EKV FD K 70 12000AL

EKV FD K H70 12000AL

Part No. 752 086 + 752 126 + 752 121 +Material (cable) Al Al AlCable cross-section 2 2 2


DB drawing No.PU

751 087 EKV R 50 8500751 127 EKV R 50 12000751 122 EKV R H 50 12000752 087 EKV FD R 70 8500AL752 127 EKV FD R 70 12000AL752 122 EKV FD R H70 12000AL

751 087 4013364126633 5-5-0 9.13 kg 1 pc(s)751 127 4013364126671 5-5-0 11.01 kg 1 pc(s)751 122 4013364126657 5-5-0 11.41 kg 1 pc(s)752 087 4013364230422 5-5-0 7.21 kg 1 pc(s)752 127 4013364230439 5-5-0 8.21 kg 1 pc(s)752 122 4013364230453 5-5-0 8.48 kg 1 pc(s)

Type EKV R 50 8500 EKV R 50 12000 EKV R H 50 12000Part No. 751 087 751 127 751 122Material (cable) Cu Cu CuCable cross-section 2 2 2


DB drawing No.PU

With Earth Clamp for Overhead Contact Lines and Clamp For Railway Tracks with Ratchet

Type EKV FD R 70 8500AL

EKV FD R 70 12000AL EKV FD R H70 12000AL

Part No. 752 087 + 752 127 + 752 122 +Material (cable) Al Al AlCable cross-section 2 2 2


DB drawing No.PU



4. E

aS D

evic

es

750 041 EKV UK 50 4000752 041 EKV UKQ UKH70 4000AL

750 041 4013364126688 5-5-1 4.22 kg 1 pc(s)752 041 4013364230569 5-5-0 3.18 kg 1 pc(s)

Type EKV UK 50 4000 EKV UKQ UKH70 4000ALPart No. 750 041 752 041 +Material (cable) Cu AlCable cross-section 2 2

Cable lengthDB drawing No.PU

750 042 EKV LK 50 4000752 042 EKV LK UKH 70 4000AL

750 042 4013364126695 5-5-1 3.89 kg 1 pc(s)752 042 4013364230576 5-5-0 3.06 kg 1 pc(s)

Type EKV LK 50 4000 EKV LK UKH 70 4000ALPart No. 750 042 752 042 +Material (cable) Cu AlCable cross-section 2 2


751 150 EKV2 50 KKH 600 1800

751 150 4013364084520 5-3-0 4.53 kg 1 pc(s)

Type EKV2 50 KKH 600 1800Part No. 751 150Material (cable) CuCable cross-section 2

Cable lengthDB drawing No.DB material No.PU

Ø

751 191 BEV MF SE K751 193 BEV BM HZ BDW K752 191 BEV UKH K 70 8500AL752 193 BEV UKH K 70 12000AL

751 191 4013364126602 5-5-1 8.82 kg 1 pc(s)751 193 4013364123892 5-5-1 10.28 kg 1 pc(s)752 191 4013364230330 5-5-0 6.34 kg 1 pc(s)752 193 4013364230538 5-5-0 7.38 kg 1 pc(s)

Type BEV MF SE K BEV BM HZ BDW K BEV UKH K 70 8500AL

BEV UKH K 70 12000AL

Part No. 751 191 751 193 752 191 + 752 193 +Material (cable) Cu Cu Al AlCable cross-section 2 2 2 2


58/9

4

2

44

11

3

7

7

7

10

10



EaS

Dev

ices

751 196 BEV MF SE R751 197 BEV BM HZ BDW R752 196 BEV UKH R 70 8500AL752 197 BEV UKH R 70 12000AL


Type BEV MF SE R BEV BM HZ BDW R BEV UKH R 70 8500AL

BEV UKH R 70 12000AL

Part No. 751 196 751 197 752 196 + 752 197 +Material (cable) Cu Cu Al AlCable cross-section 2 2 2 2


751 192 BEV MF LTE752 192 BEV 2XUKH 70 8500AL

751 192 4013364123885 5-5-1 6.68 kg 1 pc(s)752 192 4013364230590 5-5-0 4.66 kg 1 pc(s)

Type BEV MF LTE BEV 2XUKH 70 8500ALPart No. 751 192 752 192 +Material (cable) Cu AlCable cross-section 2 2


740 124 EHH BEV OL

740 124 4013364051072 5-5-2 255 g 1 pc(s)

Type EHH BEV OLPart No. 740 124DB material No.PU

Suspension Hook

751 040 EKS 50 BEV 4M751 085 EKS 50 BEV 8.5M751 120 EKS 50 BEV 12M751 130 EKS 50 BEV 13M751 140 EKS 50 BEV 14M752 040 EKS B10.5 70 4000AL752 085 EKS B10.5 70 8500AL752 120 EKS B10.5 70 12000AL752 130 EKS B10.5 70 13000AL752 140 EKS B10.5 70 14000AL

751 040 4013364006041 5-5-2 2.6 kg 1 pc(s)751 085 4013364006058 5-5-2 4.98 kg 1 pc(s)751 120 4013364006065 5-5-2 6.86 kg 1 pc(s)751 130 4013364041776 5-5-2 7.39 kg 1 pc(s)751 140 4013364018570 5-5-2 7.93 kg 1 pc(s)752 040 4013364230187 5-5-0 1.09 kg 1 pc(s)752 085 4013364230637 5-5-0 2.32 kg 1 pc(s)752 120 4013364230644 5-5-0 3.28 kg 1 pc(s)752 130 4013364245594 5-5-2 3.5 kg 1 pc(s)752 140 4013364245617 5-5-2 3.83 kg 1 pc(s)

Type EKS 50 BEV 4M EKS 50 BEV 8.5M EKS 50 BEV 12M EKS 50 BEV 13M EKS 50 BEV 14MPart No. 751 040 751 085 751 120 751 130 751 140Material Cu Cu Cu Cu CuCable cross-section 2 2 2 2 2

Cable lengthDB material No. — —PU

Accessories for Earthing and Short-Circuiting Devices for Railway Applications

General technical data:Crimped cable lug PK2 (Ø

Single-pole Earthing and Short-Circuiting Cable, unequippedWith red and white marking and cable lug with borehole Ø10 mm.

68/9

7

7 78

Type EKS B10.5 70 4000AL

EKS B10.5 70 8500AL

EKS B10.5 70 12000AL

EKS B10.5 70 13000AL

EKS B10.5 70 14000AL

Part No. 752 040 + 752 085 + 752 120 + 752 130 + 752 140 +Material Al Al Al AlCable cross-section 2 2 2 2 2

Cable lengthPU



4. E

aS D

evic

es


• For copper or aluminium busbars up to a thickness of 25 mm•

• • Other busbar and earthing cable lengths can be selected online via the

Short-Circuiting Bar

EaS Configurator:

www.dehn.de/en/euk

VYKJW2W KS60 8SK C VYKJW2WVCS8GYU KS60 12SK C VCS8GYUV1TDM78 KS60 8SQ C V1TDM78VU2EWNF KS60 12SQ C VU2EWNF

VYKJW2W 4013364211407 5-4-0 10 kg 1 pc(s)VCS8GYU 4013364165304 5-4-0 4.96 kg 1 pc(s)V1TDM78 4013364165311 5-4-0 10 kg 1 pc(s)VU2EWNF 4013364165328 5-4-0 10 kg 1 pc(s)

Type KS60 ... 8SK C VYKJW2W 12SK C VCS8GYU 8SQ C V1TDM78 12SQ C VU2EWNFVariant No. VYKJW2W VCS8GYU V1TDM78 VU2EWNFCoupling mechanism


Rigid ball head cap (Part No. 772 312) on the earth cable end.

VUZ656W KS60 8SK A VUZ656WVLUZZB9 KS60 12SK A VLUZZB9VUQ18JL KS60 8SQ A VUQ18JLVNYHZGF KS60 12SQ A VNYHZGF

VUZ656W 4013364165335 5-4-0 10 kg 1 pc(s)VLUZZB9 4013364165342 5-4-0 10 kg 1 pc(s)VUQ18JL 4013364165359 5-4-0 10 kg 1 pc(s)VNYHZGF 4013364165366 5-4-0 10 kg 1 pc(s)

Type KS60 ... 8SK A VUZ656W 12SK A VLUZZB9 8SQ A VUQ18JL 12SQ A VNYHZGFVariant No. VUZ656W VLUZZB9 VUQ18JL VNYHZGFCoupling mechanism


Rigid ball head cap (Part No. 772 312) on the earth cable end.

795 040 KLFP M12 KSS

795 040 4013364077393 5-4-1 890 g 1 pc(s)

Type KLFP M12 KSSPart No. 795 040TypePU

Accessories for Short-Circuiting Bar

Fixed Clamping Point for Busbars

795 214 SA KLFP SK

795 214 4013364051799 5-4-1 117.5 g 1 pc(s)

Type SA KLFP SKPart No. 795 214Total length (lG)PU

SK Screw-Type Adapter

795 213 SA KLFP SQ

795 213 4013364053243 5-4-1 114 g 1 pc(s)

Type SA KLFP SQPart No. 795 213Total length (lG)PU

SQ Screw-Type Adapter

T pin shaft (bayonet coupling mechanism).

Two coupling mechanisms are required for a total length > 1000 mm.

on page 154 and send it to us.



EaS

Dev

ices

Earthing and short-circuiting device in accordance with EN/IEC 61230 (DIN VDE 0683-100) for earthing and short-circuiting electrical instal-lations at the work location as equipotential bonding measure in accordance with EN 50110 (DIN VDE 0105-100).• Fully insulated (VI), shock-proof version• Fully equipped kits for cable distribution cabinets•

Earthing a. Short-Circuiting Devices (fully insulated) f. Low-Voltage Cable Distribution Cabinets

EaS Configurator:

www.dehn.de/en/euk

745 903 EKS VI 2F KVS KK

745 903 4013364093577 5-6-3 7 kg 1 pc(s)

Type EKS VI 2F KVS ... KKPart No. 745 903Variant No. of the earthing and short-circuiting device V162LDM

DimensionsPU

Kit in Plastic Case

745 901 EKS VI 2F KVS SBK

745 901 4013364083530 5-6-3 6.89 kg 1 pc(s)

Type EKS VI 2F KVS ... SBKPart No. 745 901Variant No. of the earthing and short-circuiting device V162LDM

DimensionsPU

Kit in Sheet Metal Case

Kit includes:Pos. Part No. Pos. Part No.1 1x 745 902 5 6x 745 9103 2x V162LDM 6 1x 745 9224 3x 745 905For more detailed information

on these products,

4

1

5

6

3

Kit includes:Pos. Part No. Pos. Part No.2 1x 745 900 5 6x 745 9103 2x V162LDM 6 1x 745 9224 3x 745 905For more detailed information

on these products,

2

5

6

4

3

745 902 KKL EKS VI KVS

745 902 4013364093591 5-6-2 1.62 kg 1 pc(s)

Type KKL EKS VI KVSPart No. 745 902DimensionsPU

Single Parts Earthing a. Short-Circuiting Devices (fully insulated) f. Low-Voltage Cable Distribution Cabinets

Plastic Case, emptyWith foam padding.

745 900 SBKL EKS VI KVS

745 900 4013364082731 5-6-2 3.71 kg 1 pc(s)

Type SBKL EKS VI KVSPart No. 745 900DimensionsPU

Sheet Metal Case, emptyWith foam padding.

745 952 KK 56 41 17 EK VI TI

745 952 4013364137066 5-6-2 4.9 kg 1 pc(s)

Type KK 56 41 17 EK VI TIPart No. 745 952DimensionsPU

Plastic Case, emptyWith foam padding and hook-and-loop fastener.

1

2



4. E

aS D

evic

es

V162LDM EKV3 25VI DG V162LDMVE5K3HM EKV3 35VI DG VE5K3HM

V162LDM 4013364162655 5-4-0 1.38 kg 1 pc(s)VE5K3HM 4013364162679 5-4-0 1.53 kg 1 pc(s)

Type EKV3 25VI DG V162LDM EKV3 35VI DG VE5K3HMVariant No. V162LDM VE5K3HMCable cross-section 2 2



PU


VMRSJWD EKV3 25VI EK VMRSJWDVEH4JQY EKV3 35VI EK VEH4JQY

VMRSJWD 4013364163805 5-4-0 1.1 kg 1 pc(s)VEH4JQY 4013364163850 5-4-0 10 kg 1 pc(s)

Type EKV3 25VI EK VMRSJWD EKV3 35VI EK VEH4JQYVariant No. VMRSJWD VEH4JQYCable cross-section 2 2



PU

745 503 KK TA 0 24 SK10

745 503 4013364133570 5-6-1 154 g 1 pc(s)

Type KK TA 0 24 SK10Part No. 745 503Clamping rangeMax. short-circuit current Ik 0.5 s


PU

Spring-loaded compact Clamp

745 905 EP NH00 VI TA

745 905 4013364082021 5-6-1 75 g 1 pc(s)

Type EP NH00 VI TAPart No. 745 905SizeMax. short-circuit current Ik 0.5 s


PU

NH 00 Earthing CartridgesWith T connection for installation into NH fuse holders and blocks of size NH 00.For use with VI earthing handle.

745 910 EP NH1 3 VI TA

745 910 4013364082038 5-6-1 190 g 1 pc(s)

Type EP NH1 3 VI TAPart No. 745 910SizeMax. short-circuit current Ik 0.5 s


PU

NH 1 ... 3 Earthing CartridgesWith T connection for installation into NH fuse holders and blocks of size NH 1 ... 3.For use with VI earthing handle.

VZPW9LG EKV3 16VI EK VZPW9LG

VZPW9LG 4013364163751 5-4-0 0.68 kg 1 pc(s)

Type EKV3 16VI EK VZPW9LGVariant No. VZPW9LGCable cross-section 2

Max. short-circuit current Ik 0.5 sMax. short-circuit current Ik 1 s

PU

3

4

5



EaS

Dev

ices

745 915 EP NH4A VI TA

745 915 4013364082045 5-6-1 420 g 1 pc(s)Type EP NH4A VI TAPart No. 745 915SizeMax. short-circuit current Ik 0.5 s


PU


NH 4a Earthing Cartridges

745 922 EG 00 4A VI

745 922 4013364082434 5-6-2 220 g 1 pc(s)

Type EG 00 4A VIPart No. 745 922LengthPU

VI Earthing HandleWith dual function.• For installing earthing cartridges with T connection into NH fuse holders• For connecting VI earthing and short-circuiting devices to earthing cartridges

745 921 DGF EKV VI

745 921 4013364082069 5-6-2 220 g 1 pc(s)

Type DGF EKV VIPart No. 745 921LengthPU

With magnetic socket wrench insert.For connecting spring-loaded earth clamps.

6

Earthing and short-circuiting device in accordance with EN/IEC 61230 (DIN VDE 0683-100) for earthing and short-circuiting electrical instal-lations at the work location as equipotential bonding measure in accordance with EN 50110 (DIN VDE 0105-100).• Partly insulated (TI) version• Fully equipped kits for cable distribution cabinets•

Earthing a. Short-Circuiting Devices (partly insulated) f. Low-Voltage Cable Distribution Cabinets

EaS Configurator:

www.dehn.de/en/euk

766 302 EKS TI KVS SBK

766 302 4013364051317 5-6-3 4.38 kg 1 pc(s)

Type EKS TI ... KVS SBKPart No. 766 302Variant No. of the earthing and short-circuiting device VSUN6NV

DimensionsPU

Kit I in Sheet Metal Case

Kit includes:Pos. Part No. Pos. Part No.1 1x 766 300 6 3x 745 0183 1x VSUN6NV 9 1x 745 400For more detailed information

on these products,

745 500 EKS TI 2F KVS SBK

745 500 4013364007888 5-6-3 7.57 kg 1 pc(s)

Type EKS TI ... 2F KVS SBKPart No. 745 500Variant No. of the earthing and short-circuiting device VUKMT58

DimensionsPU

Kit II in Sheet Metal Case

Kit includes:Pos. Part No. Pos. Part No.2 1x 766 298 7 3x 745 2024 2x VUKMT58 8 2x 745 6025 3x 745 302 9 1x 745 4006 6x 745 018For more detailed information

on these products,

9

6 13

56

7

48

92



4. E

aS D

evic

es

VSUN6NV EKV3 25TI DG VSUN6NVVSHDQZB EKV3 35TI DG VSHDQZB

VSUN6NV 4013364163782 5-4-0 1.56 kg 1 pc(s)VSHDQZB 4013364163836 5-4-0 1.71 kg 1 pc(s)

Type EKV3 25TI DG VSUN6NV EKV3 35TI DG VSHDQZBVariant No. VSUN6NV VSHDQZBCable cross-section 2 2



PU

V3RQASE EKV3 16TI HK V3RQASEVUKMT58 EKV3 25TI HK VUKMT58VDZ2VDX EKV3 35TI HK VDZ2VDX

VUKMT58 4013364163799 5-4-0 1.25 kg 1 pc(s)VDZ2VDX 4013364163843 5-4-0 1.38 kg 1 pc(s)

Type EKV3 16TI HK V3RQASE

EKV3 25TI HK VUKMT58

EKV3 35TI HK VDZ2VDX

Variant No. V3RQASE VUKMT58 VDZ2VDXCable cross-section 2 2 2



PU

For installation of earth clamps Part No. 745 602 or 745 502, for cable distribution cabinets.

766 300 SBKL EKS TI KVS

766 300 4013364007628 5-6-2 1.2 kg 1 pc(s)

Type SBKL EKS TI KVSPart No. 766 300DimensionsPU

Single Parts Earthing a.Short-Circuiting Devices (partly insulated) f. Low-Voltage Cable Distribution Cabinets

Sheet Metal Case, empty

766 298 SBKL EKS TI KVS 2F

766 298 4013364007864 5-6-2 3.7 kg 1 pc(s)

Type SBKL EKS TI KVS 2FPart No. 766 298DimensionsPU

Sheet Metal Case, empty With foam padding.

745 952 KK 56 41 17 EK VI TI

745 952 4013364137066 5-6-2 4.9 kg 1 pc(s)

Type KK 56 41 17 EK VI TIPart No. 745 952DimensionsPU

Plastic Case, emptyWith foam padding and hook-and-loop fastener.

V1RC3P2 EKV3 NH00 TI V1RC3P2

V1RC3P2 4013364163737 5-4-0 0.59 kg 1 pc(s)

Type EKV3 NH00 TI V1RC3P2Variant No. V1RC3P2Cable cross-section 2



PU

1

2

3

4



EaS

Dev

ices

5

VSB29AH EKV3 16TI EK VSB29AH

Type EKV3 16TI EK VSB29AHVariant No. VSB29AHCable cross-section 2



PU


screw-on cable lugs with M10 hexagon pin on the phase cable end, to be screwed onto earthing cartridges with M10 connection of service entrance boxes.

745 302 EP NH00 TI M10

745 302 4013364052024 5-6-1 110 g 1 pc(s)

Type EP NH00 TI M10Part No. 745 302SizeMax. short-circuit current Ik 0.5 s


PU

NH 00 Earthing CartridgesWith M10 connection for insertion into NH fuse holders and blocks of size NH 00.For use with TI earthing handle.

745 018 EP NH1 3 TI M10

745 018 4013364052048 5-6-1 271 g 1 pc(s)

Type EP NH1 3 TI M10Part No. 745 018SizeMax. short-circuit current Ik 0.5 s


PU

NH 1 ... 3 Earthing CartridgesWith M10 connection for insertion into NH fuse holders and blocks of size NH 1 ... 3.For use with TI earthing handle.

745 016 EP NH4A TI M10

745 016 4013364052000 5-6-1 467 g 1 pc(s)

Type EP NH4A TI M10Part No. 745 016SizeMax. short-circuit current Ik 0.5 s


PU

NH 4a Earthing CartridgesWith M10 connection for insertion into NH fuse holders and blocks of size NH 4a.

745 017 EP NH1 3 TI GL M10

745 017 4013364052017 5-6-1 277.1 g 1 pc(s)

Type EP NH1 3 TI GL M10Part No. 745 017SizeMax. short-circuit current Ik 0.5 s


PU

NH 1 ... 3 Earthing Cartridges with Grip LugsWith M10 connection for use with TI earthing handle or NH fuse handle with sleeve (Part No. 785 645).

745 201 ESE E27 TI M10745 202 ESE E33 TI M10

745 201 4013364008007 5-6-1 65 g 1 pc(s)745 202 4013364007871 5-6-1 90 g 1 pc(s)

Type ESE E27 TI M10 ESE E33 TI M10Part No. 745 201 745 202SizeMax. short-circuit current Ik 0.5 s


PU

Screw-in Earthing Insert with M10 Connection, insulatedInsulated thread.To be screwed into E27 and E33 threaded fuse holders using a TI earthing handle.

6

7



4. E

aS D

evic

es

745 203 ESE E27 KBI M10745 204 ESE E33 KBI M10

745 203 4013364008014 5-6-1 102 g 1 pc(s)745 204 4013364018655 5-6-1 145 g 1 pc(s)

Type ESE E27 KBI M10 ESE E33 KBI M10Part No. 745 203 745 204SizeMax. short-circuit current Ik 0.5 s


PU


Screw-in Earthing Insert with M10 ConnectionConductive thread.To be screwed into E27 and E33 threaded fuse holders using a TI earthing handle.

745 602 EK I FL20 DGF

745 602 4013364072220 5-6-1 580 g 1 pc(s)

Type EK I FL20 DGFPart No. 745 602Clamping rangePU

To be connected to the earth cable end of earthing and short-circuiting devices for cable distribution cabinets, with M8 pin, anti-rotation element and nut.

745 502 EK FL20 FS

745 502 4013364072213 5-6-1 360 g 1 pc(s)

Type EK FL20 FSPart No. 745 502Clamping rangePU

Bare Earth Clamp with Wing BoltTo be connected to the earth cable end of earthing and short-circuiting devices for cable distribution cabinets, with M8 pin, anti-rotation element and nut.

745 508 KK M8 0 24 SK 10

745 508 4013364149366 5-6-1 137 g 1 pc(s)

Type KK M8 0 24 SK 10Part No. 745 508Clamping rangeMax. short-circuit current Ik 0.5 s Max. short-circuit current Ik 1 s PU

Spring-loaded Compact ClampWith threaded bolt M8 x 12 mm and hexagon locking screw (wrench size 10).

745 400 EG TI EKV

745 400 4013364006959 5-6-2 250 g 1 pc(s)

Type EG TI EKVPart No. 745 400LengthPU

TI Earthing HandleWith dual function.• For installing earthing cartridges or screw-in earthing inserts with M10 connection• For connecting TI earthing and short-circuiting devices to earthing cartridges (wrench size 19)

745 921 DGF EKV VI

745 921 4013364082069 5-6-2 220 g 1 pc(s)


With magnetic socket wrench insert.For connecting spring-loaded earth clamps.

9

8



EaS

Dev

ices

Earthing and short-circuiting device in accordance with EN/IEC 61230 (DIN VDE 0683-100) for earthing and short-circuiting electrical instal-lations at the work location as equipotential bonding measure in accordance with EN 50110 (DIN VDE 0105-100).•

Earthing and Short-Circuiting Devices for Crane Conductor Bars

EaS Configurator:

www.dehn.de/en/euk

VH8QTCZ EKV3 25IS ZK VH8QTCZVKB2Q6J EKV3 35IS ZK VKB2Q6JVP6YV4T EKV3 50IS ZK VP6YV4T

VH8QTCZ 4013364163775 5-4-0 5.43 kg 1 pc(s)VKB2Q6J 4013364163829 5-4-0 5.58 kg 1 pc(s)VP6YV4T 4013364162686 5-4-0 6.13 kg 1 pc(s)

Type EKV3 ... 25IS ZK VH8QTCZ 35IS ZK VKB2Q6J 50IS ZK VP6YV4TVariant No. VH8QTCZ VKB2Q6J VP6YV4TClamping rangeCable cross-section 2 2 2


With Screw Clamps for Insulated Conductor Bars

VQKTK4T EKV3 25BS ZK VQKTK4TVN63A91 EKV3 35BS ZK VN63A91

VQKTK4T 4013364163768 5-4-0 5.23 kg 1 pc(s)

Type EKV3 ... 25BS ZK VQKTK4T 35BS ZK VN63A91Variant No. VQKTK4T VN63A91Clamping rangeCable cross-section 2 2


With Screw Clamps for Uninsulated Conductor Bars

771 230 ZK55 IS771 231 ZK55 IS BL

771 230 4013364144392 5-7-1 1.05 kg 1 pc(s)771 231 4013364144408 5-7-1 1.05 kg 1 pc(s)

Type ZK55 IS ZK55 IS BLPart No. 771 230 771 231Clamping rangePU

Accessories for Earthing and Short-Circuiting Devices for Crane Conductor Bars

Screw Clamps for insulated Conductor BarsWith M12 bolt.

771 232 ZK85 BS771 233 ZK85 BS BL

771 232 4013364144415 5-7-1 1.05 kg 1 pc(s)771 233 4013364144422 5-7-1 1.05 kg 1 pc(s)

Type ZK85 BS ZK85 BS BLPart No. 771 232 771 233Clamping rangePU

Screw Clamps for bare Conductor BarsWith M12 bolt.

The clamp for the PEN conductor is marked in blue.

... BL

... BL



4. E

aS D

evic

es

Earthing and short-circuiting device in accordance with EN/IEC 61230 (DIN VDE 0683-100) for earthing and short-circuiting electrical instal-lations at the work location as equipotential bonding measure in accordance with EN 50110 (DIN VDE 0105-100).

Earthing and Short-Circuiting Device for Street Lighting Systems

745 105 EKV ÜGK MB S

745 105 4013364104457 5-6-3 1.83 kg 1 pc(s)

Type EKV ÜGK MB SPart No. 745 105DimensionsPU

Kit in Plastic Case

Kit includes:Pos. Part No. Pos. Part No.1 1x 745 106 4 1x 745 1092 2x 745 107 5 1x 745 9213 6x 745 108For more detailed information

on these products,

1

2

5

3

4

745 106 KKL EKV ÜGK MB

745 106 4013364104495 5-6-2 890 g 1 pc(s)

Type KKL EKV ÜGK MBPart No. 745 106DimensionsColour Grey1PU

Single Parts for Earthing and Short-Circuiting Device for Street Lighting Systems

Plastic Case, emptyWith foam padding

745 107 EKV ÜGK MB

745 107 4013364104501 5-6-0 286 g 1 pc(s)

Type EKV ÜGK MBPart No. 745 107Cable cross-section 2

PU

Part No. 745 921)

745 108 RED E27 E14 ÜGK MB

745 108 4013364104518 5-6-2 20 g 1 pc(s)

Type RED E27 E14 ÜGK MBPart No. 745 108Dimensions ØMaterial AluminiumPU

E27 / E14 AdapterReducing insert for converting from E27 to E14 threads

745 109 PSS DII

745 109 4013364104525 5-6-2 18.2 g 1 pc(s)

Type PSS DIIPart No. 745 109Dimensions ØMaterial PlasticPU

Installation AdapterFor installing E27 / E14 adapters and gauge rings for D-fuses DII and DIII

745 921 DGF EKV VI

745 921 4013364082069 5-6-2 220 g 1 pc(s)


With magnetic socket wrench insertFor connecting spring-loaded earth clamps

1

2

3

4

5



EaS

Dev

ices

Earthing handle for attaching portable earthing and short-circuiting devices (single-pole/three-pole devices and short-circuiting bars) at power installations up to 1000 V in accordance with EN 50110 (DIN VDE 0105-100).

Earthing Handle for Low-Voltage Installations

745 415 EG SK STK 400

745 415 4013364116092 5-4-2 275 g 1 pc(s)

Type EG ... SK STK 400Part No. 745 415Total length (lG)PU

Earthing Handle for hexagon Shafts, plug-in Coupling• Handle termination with plastic plug-in coupling for extending the handle

745 414 EG SQ STK 400

745 414 4013364116085 5-4-2 285 g 1 pc(s)

Type EG ... SQ STK 400Part No. 745 414Total length (lG)PU

Earthing Handle for T Pin Shafts, plug-in Coupling•


5. Provide Protection against adjacent Live Parts – Insulating Protective Shutters

5. In

sula

ting

Pro

tect

ive

Shut

ters

Guide rails and other accessories are listed in our template.

Insulating protective shutters in accordance with DIN VDE 0682-552 provide protection against accidental contact with live parts of an installation at the work location in accordance with EN 50110 (DIN VDE 0105-100).• For indoor use• Four different designs for switchgear installations in accordance with DIN VDE 0101• Template (form No. 2090) for specifying the dimensions and design

Insulating Protective Shutters

763 211 ISP 36 PVC A1...

763 211 4013364081567 5-2-3 0 g 1 pc(s)

Type ISP 36 PVC ... A1...Part No. 763 211Rated voltage (Ur)Material Rigid PVCPU

Type A1• Safety distance provides protection when inserting and removing insulating protective shutters

763 221 ISP 36 PVC A2...

763 221 4013364081574 5-2-3 0 g 1 pc(s)


Type A2• Protective part provides protection when inserting and removing insulating protective shutters

763 231 ISP 36 PVC A3...

763 231 4013364081581 5-2-3 0 g 1 pc(s)


Type A3• Operating sticks provide protection when inserting and removing insulating protective shutters

763 241 ISP 36 PVC A4...

763 241 4013364081598 5-2-3 0 g 1 pc(s)


Type A4• Protective device installed on the installation provides protection when inserting and removing insulating protective shutters

Note:

DEHN protects.


Cleaning Equipment

Clea

ning

Equ

ipm

ent

Cleaning Equipment

Live Working

German Employer‘s Liability Insurance Association for the Energy, Textiles, Electric and Media Industry (BGETEM).The TRS NS dry cleaning -

Association for the Energy, Textiles, Electric and Media Industry (BGETEM).• • Not suitable for use in wet weather conditions• For indoor and outdoor installations• Equipment for suction cleaning under live conditions• For dry cleaning of cable distribution

cabinets, open indoor installations and control cabinets

• Specially adapted operating heads for intensive cleaning

• Plug-in coupling system allows fast replacement of operating heads

• Regulation of intake air in the handle area• Delivered in a suitable transport case

TRS NS Dry Cleaning Kit

785 502 TRS NS

Type TRS NSPart No. 785 502Total length

TRS NS Dry Cleaning KitFully equipped plastic case.

785 506 KKL TRS NS

Type KKL TRS NSPart No. 785 506Total length

Single Parts for TRS NS Dry Cleaning Kit

Plastic Case, emptyWith retaining clips.

785 520 SRH 400 NS

Type SRH 400 NSPart No. 785 520Total length

Intake Tube with HandleFor use as operating tube with handle and hand guard, with top and lower connecting part

785 521 SRV 200 NS785 522 SRV 300 NS785 523 SRV 400 NS

Type SRV 200 NS SRV 300 NS SRV 400 NSPart No. 785 521 785 522 785 523DiameterTotal length

ExtensionInsulating tube, with top and lower connecting part

785 530 SRW V NS

Type SRW V NSPart No. 785 530DiameterTotal length

Adjustable AngleLockable, adjustable due to 15° gearing, with top and lower connecting part

Kit includes:Pos. Part No. Pos. Part No.1 785 506 12 785 5602 785 520 133 785 521 14 785 5704 785 522 15 785 5505 16 785 5556 17 785 5157 785 540 18 785 2008 785 541 19 785 5959 785 542 20 785 596

10 785 590 21 785 58011 785 591 22 785 585

For more detailed information on these products, see single parts.

1

2345 6

7

17

18198

9

10

1113

1214

15

16

20

21

22

1

2

3-5

6


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 541 FD 35 NS

Type FD 35 NSPart No. 785 541DiameterTotal length

Flat Cleaning Head 35

785 542 FD 35 S NS

Type FD 35 S NSPart No. 785 542DiameterTotal length


785 590 FD 35 P NS

Type FD 35 P NSPart No. 785 590DiameterTotal length


785 591 FD 35 W P NS

Type FD 35 W P NSPart No. 785 591DiameterTotal length


785 560 RD 25 S NS

Type RD 25 S NSPart No. 785 560DiameterTotal length

Round Cleaning HeadWith scraper (50 mm).

785 543 QD 35 W NS

Type QD 35 W NSPart No. 785 543DiameterTotal length

Cross Cleaning Head 35

785 540 FD 55 NS

Type FD 55 NSPart No. 785 540DiameterTotal length


Flat Cleaning Head 55Width: 55 mm.

7

8

9

10

11

12

13


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 550 STB 85 Z NS

Type STB 85 Z NSPart No. 785 550DiameterTotal length

Tubular Brush 85 mmCylindrical bristles.

785 555 STB 85 K NS

Type STB 85 K NSPart No. 785 555DiameterTotal length

Tubular Brush 85 mmConical bristles.

785 515 SRA NS

Type SRA NSPart No. 785 515DiameterTotal length

Intake Tube AdapterFor brushes and cleaning heads (Ø25 mm).

785 200 SSA W D

Type SSA W DPart No. 785 200Diameter

Intake Hose AdapterØ

785 570 RD 25 P NS

Type RD 25 P NSPart No. 785 570DiameterTotal length


Round Cleaning HeadWith brush.

785 595 EP 25 K NS

Type EP 25 K NS EP 25 L NSPart No. 785 595 785 596Total length

Spare Brush

785 596 EP 25 L NS

785 580 RB 40 NS

Type RB 40 NS RB 20 NSPart No. 785 580 785 585DiameterTotal length

Cleaning BrushFor individual kit parts (Ø40 mm and Ø25 mm).

785 585 RB 20 NS

14

15

16

17

18

19

20

21 22


Cleaning Equipment

Clea

ning

Equ

ipm

ent

-

Industry (BGETEM).In accordance with DIN VDE 0682-621• Not suitable for use in wet weather conditions• For indoor and outdoor installations• Equipment for live cleaning by means of suction• For dry cleaning of transformers and switchgear installations• Transparent intake tubes ensure enhanced safety• Specially adapted operating heads for intensive cleaning• Plug-in coupling system allows fast replacement of operating heads• Delivered in a suitable transport case

TRS MS Dry Cleaning Kit2021

Wiederholungsp

rüfung

Nächste

785 100 TRS MS

Type TRS ... MSPart No. 785 100Dimensions

TRS MS Dry Cleaning Kit Fully equipped GRP case.

785 112 TRS MS V1

Type TRS ... MS V1Part No. 785 112Dimensions

TRS MS V1 Dry Cleaning Kit Fully equipped GRP case.

Kit includes:Pos. Part No. Pos. Part No.1 19 785 1405 20 785 1506 21 785 1707 25 785 220

10 785 120 26 785 22115 2x 785 121 39 785 20016 2x 785 122 42 785 18017 2x 44 785 19018 785 160


Kit includes:Pos. Part No. Pos. Part No.1 21 785 1705 22 785 1716 23 785 1727 25 785 220

10 785 120 26 785 22115 2x 785 121 39 785 20016 2x 785 122 40 785 21217 42 785 18018 785 160 44 785 19019 785 140 47 785 210


Note: The Pos. Nos. highlighted in grey indicate the differences between the dry cleaning kits.

1

4416

16

5

197

47

18

6

10

15

39

1721

15

25 26

20

17

42

1

441616

5

197

47

18

6

10

15

39

1721

15

25 26

23

40

42 22


Cleaning Equipment

Clea

ning

Equ

ipm

ent

• Based on DIN VDE 0681-1 and DIN VDE 0682-621• Not suitable for use in wet weather conditions• For indoor and outdoor installations• Damp cleaning equipment for use under live conditions with special cleaning liquid• • • Delivered in a suitable transport case

FRS ZK MS Damp Cleaning Kit 2021

Wiederholungsp

rüfung

Nächste

785 940 FRS ZK MS

Type FRS ZK MSPart No. 785 940Dimensions

FRS ZK MS Damp Cleaning KitFully equipped GRP case.

Kit includes:Pos. Part No. Pos. Part No.2 785 229 328 33

11 3412 35 785 27413 36 785 27514 37 785 27930 38 785 28031


8

1333

35 3736

2

38

32

11

14

34

30 31

12


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 950 TFRS MS

Type TFRS MSPart No. 785 950Dimensions (bag)Dimensions (case)

TFRS MS Combined Cleaning KitFully equipped GRP case and leather bag.

Employer‘s Liability Insurance Association for the Energy, Textiles, Electric and Media Industry (BGETEM).• Based on DIN VDE 0681-1 (damp cleaning)• In accordance with DIN VDE 0682-621 (dry cleaning)• Not suitable for use in wet weather conditions• For indoor and outdoor installations• Combined dry and damp kit for cleaning under live conditions• Transparent intake tubes for enhanced safety• Specially adapted operating heads for intensive cleaning• • • Delivered in a suitable transport case

TFRS MS Combined Cleaning Kit 2021

Wiederholungsp

rüfung

Nächste

5

3 26

13

3112

21

34

40

2544

39

15

2035-38

4 9

47

4810

49

14143311

323016

17

17

27

22

23

28

2918

41

4543

246

46

7

19

Parts list:Pos. Part No. Pos. Part No.1 26 785 2212 785 229 273 785 951 28 785 5514 785 952 29 785 5525 306 317 328 339 34

10 785 120 35 785 27411 36 785 27512 37 785 27913 38 785 28014 39 785 20015 785 121 40 785 21216 785 122 41 785 25917 42 785 18018 785 160 43 785 18119 785 140 44 785 19020 785 150 4521 785 170 46 785 22422 785 171 47 785 21023 785 172 48 785 58524 785 151 49 785 10925 785 220


Kit – Bag:Pos. Part No. Pos. Part No.4 785 952 47 785 2109 48 785 585

10 785 120 49 785 109For more detailed information

on these products, see single parts.

Kit – Case:Pos. Part No. Pos. Part No.3 785 951 275 28 785 5516 29 785 5527 30

11 3112 3213 3314 2x 3415 785 121 35 785 27416 785 122 36 785 27517 2x 37 785 27918 785 160 38 785 28019 785 140 39 785 20020 785 150 40 785 21221 785 170 41 785 25922 785 171 43 785 18123 785 172 44 785 19024 785 151 4525 785 220 46 785 22426 785 221


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 301 KKL TRS MS

Type KKL TRS MSPart No. 785 301Colour Blue1Dimensions

Single Parts for MS Cleaning Kit

GRP Case, emptyWith retaining clips and printed top and bottom insert.

785 229 KKL FRS ZK MS

Type KKL FRS ZK MSPart No. 785 229Colour Blue1Dimensions

GRP Case, emptyWith retaining clips and printed bottom insert.

785 951 KKL TFRS MS

Type KKL TFRS MSPart No. 785 951Colour Blue1Dimensions

GRP Case, emptyWith retaining clips and printed top and bottom insert.

785 952 KLT 140 28

Type KLT 140 28Part No. 785 952Colour Black1Dimensions

With zip and shoulder strap.

785 131 SRW 90 MS

Type SRW 90 MSPart No. 785 131DiameterDimensions

90° angled Intake Tube

785 132 SRW 135 MS

Type SRW 135 MSPart No. 785 132DiameterDimensions

135° angled Intake Tube

785 130 SRW V MS

Type SRW V MSPart No. 785 130DiameterDimensions

Angled Intake TubeLockable, adjustable due to 15° gearing, for positioning the cleaning heads.

1

2

3

4

5

6

7


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 315 IS T 36 ZK STK 1300

Type IS T 36 ZK STK 1300Part No. 785 315DiameterTotal length


Insulating Stick with Handle and plug-in CouplingModularFor use as operating stick with handle, hand guard, insulating element, red ring and extension, extendible handle

785 325 IS 36 ZK STK 1300

Type IS 36 ZK STK 1300Part No. 785 325DiameterTotal length

Insulating Stick with Handle and plug-in CouplingConsisting of one element

785 120 SRH 1180 MS

Type SRH 1180 MSPart No. 785 120DiameterTotal length

Intake Tube with HandleFor use as operating tube with handle, hand guard, insulating element, red ring and extension

785 316 ISV 220 ZK MS785 317 ISV 320 ZK MS785 318 ISV 420 ZK MS785 319 ISV 820 ZK MS

Type ISV 220 ZK MS ISV 320 ZK MS ISV 420 ZK MS ISV 820 ZK MSPart No. 785 316 785 317 785 318 785 319DiameterTotal length

Extension

785 121 SRV 200 MS785 122 SRV 400 MS785 123 SRV 800 MS

Type SRV 200 MS SRV 400 MS SRV 800 MSPart No. 785 121 785 122 785 123DiameterTotal length

Extension

785 160 REB 1095 MS

Type REB 1095 MSPart No. 785 160DiameterDimensions

Rectangular Brush

785 140 HRB 120 MS785 150 HRB 190 MS

Type HRB 120 MS HRB 190 MSPart No. 785 140 785 150Diameter

Half-round BrushFor cleaning insulators as well as horizontal and vertical openings. The brush can be attached to SRW V MS angled intake tubes that can be adjusted to lead the brush around the complete insulator.

785 151 BB 245 MS

Type BB 245 MSPart No. 785 151DiameterDimensions

Round Head Brush

8

9

10

11-14

15-17

18

19-20

24


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 170 STB 120 MS

Type STB 120 MS STB 80 MSPart No. 785 170 785 171DiameterTotal length


Tubular Brush 130 mm and 85 mmCylindrical bristles.

785 171 STB 80 MS

785 172 STB 80 K MS

Type STB 80 K MSPart No. 785 172DiameterTotal length

Tubular Brush 85 mm Conical bristles.

785 220 FD 60 MS

Type FD 60 MSPart No. 785 220DiameterTotal length

Cleaning Head 55Width: 55 mm.

785 221 FD 110 MS



785 223 FD 210 MS



785 551 FD 35 S MS

Type FD 35 S MSPart No. 785 551DiameterTotal length


21 22

23

25

26

27

28

785 552 FD 35 W P MS

Type FD 35 W P MSPart No. 785 552DiameterTotal length

Flat Cleaning Head

29


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 321 RP 15 ZK MS

Type RP 15 ZK MSPart No. 785 321DiameterTotal length

Round Brush

785 324 AK RS S ZK MS

Type AK RS S ZK MSPart No. 785 324DiameterTotal length

Rigid Operating HeadFor attaching cleaning sponges.

785 322 AK RS ZK MS

Type AK RS ZK MSPart No. 785 322DiameterTotal length

Single Operating HeadFlexible, for attaching cleaning sponges.

785 323 AK RS 2 ZK MS

Type AK RS 2 ZK MSPart No. 785 323DiameterTotal length

Dual Operating HeadFlexible, for attaching cleaning sponges.

785 274 RS 1544 MS

Type RS 1544 MS RS 1574 MSPart No. 785 274 785 275Dimensions

Rectangular Cleaning Sponge

785 275 RS 1574 MS

785 279 RS 15104 Z MS

Type RS 15104 Z MSPart No. 785 279Dimensions

Rectangular Cleaning Sponge, serrated

785 280 RSD 15104 Z MS

Type RSD 15104 Z MSPart No. 785 280Dimensions

Triangular Cleaning Sponge, serrated

30

31

32

33

34

35

36

37

38

785 320 S 30 ZK MS

Type S 30 ZK MSPart No. 785 320DiameterTotal length

Scraper



Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 212 SRA MS

Type SRA MSPart No. 785 212DiameterTotal length

Intake Tube AdapterFor brushes and cleaning heads (Ø25 mm).

785 259 AKA TF ZK MS

Type AKA TF ZK MSPart No. 785 259DiameterTotal length

Operating Head AdapterØ40 mm).

785 180 DHTM

Type DHTMPart No. 785 180Dimensions

Digital Hygrometer / ThermometerFor verifying the climatic conditions that must be adhered to, measuring range: – 20 °C ... + 70 °C (temperature), 10 ... 95 % (relative air humidity).

785 181 DHTM T 625

Type DHTM T 625Part No. 785 181Dimensions

Digital Hygrometer / ThermometerDigital hygrometer/thermometer for verifying the climatic conditions that must be adhered to, measuring range: -10 °C ... +60 °C (tempera-ture), 0 ...100 % (relative air humidity).

785 190 ISP 135 ZK MS

Type ISP 135 ZK MSPart No. 785 190Diameter

Insulating MirrorFor visual inspection of hidden electrical components.

785 953 SF FRF MS

Type SF FRF MSPart No. 785 953Capacity

Spray BottleFor cleaning liquids.

39

40

41

42

43

44

45

785 200 SSA W D

Type SSA W DPart No. 785 200Diameter

Intake Hose AdapterØ


785 224 EP 25 L MS

Type EP 25 L MSPart No. 785 224Dimensions

Spare Brush

46


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 585 RB 20 NS

Type RB 20 NSPart No. 785 585DiameterTotal length

Cleaning BrushFor individual kit parts (Ø25 mm).

785 109 AS MS

Type AS MSPart No. 785 109Total length

Barrier RodModular, for use as visible working limit.

47

48

49

Accessory for NS and MS Cleaning Kits785 310 HISC 1400

Type HISC 1400Part No. 785 310Dimensions

Industrial Vacuum CleanerFor dry and combined cleaning kits

Equipment:The industrial vacuum cleaner consists of a 25 l plastic container, 2 large wheels, 2 guide wheels with locking brakes, handle and cable

2 = 8600 cm2, dust collection capacity in accordance with BIA, class C, cord length: 8 m

Technical data:• Intake hose with straight connecting adapter (Ø

785 213 RSI 32785 214 RSI 34785 215 RSI 35785 216 RSI 38785 217 RSI 45785 218 RSI 51785 219 RSI 58

Type RSI 32 RSI 34 RSI 35 RSI 38Part No. 785 213 785 214 785 215 785 216Diameter

General technical data:Dimensions

Reducing InsertsFor connection between SSA W D intake hose adapter and intake hoses from other manufacturers with different diameters and straight connecting adapter.

785 210 RB 50 MS

Type RB 50 MSPart No. 785 210DiameterTotal length

Cleaning BrushFor individual kit parts (Ø40 mm), modular.


Type RSI 45 RSI 51 RSI 58Part No. 785 217 785 218 785 219Diameter


Cleaning Equipment

Clea

ning

Equ

ipm

ent

785 592 FWD 35 P NS

Type FWD 35 P NSPart No. 785 592DiameterTotal length

For TRS NS dry cleaning kits

785 119 SRH 1180 IS 650 MS

Type SRH 1180 IS 650 MSPart No. 785 119DiameterTotal length

Intake Tube with HandleFor TRS MS and TFRS MS cleaning kits

766 335 HV STK 30 710

Type HV STK 30 710Part No. 766 335DiameterTotal length

HV STK Extension HandlePlug-in coupling at both ends for extending the handle

785 111 STT 55 27 30

Type STT 55 27 30Part No. 785 111Colour 1

Dimensions

Canvas Bag, emptyWith two separate internal pockets and carrier handleFor intake hose and cover

785 225 FD 60 MS SN7271

Type FD 60 MS SN7271Part No. 785 225 +DiameterTotal length

Accessory for NS and MS Cleaning Kits

Cleaning Head 55 with Scraper


Cleaning Equipment

Clea

ning

Equ

ipm

ent

• Insulating stick kit for cleaning the windscreens of electric locomotives• For nominal voltages up to 7.5 kV / d.c. and 25 kV / a.c.• For use in wet weather conditions• • Protection against accidental contact with live parts (e.g. overhead contact lines)• Inclination angle of the operating head can be adjusted

Insulating Stick Kit for Cleaning the Windscreens of Electric Locomotives2021

Wiederholungsp

rüfung

Nächste

766 340 IS 25 ZK RK 3160

Type IS 25 ZK RK 3160Part No. 766 340Total length (lG)

Insulating Stick Kit for Cleaning Windscreens

123

4

Parts list:Pos. Part No. Pos. Part No.1 766 048 3 766 0562 766 055 4 766 057For more detailed information



Insurance Association for the Energy, Textiles, Electric and Media Industry (BGETEM).• Based on DIN VDE 0681-1 and DIN VDE 0682-621• Not suitable for use in wet weather conditions• For indoor and outdoor installations• • •

2021

Wiederholungsp

rüfung

Nächste

785 260 NFG MS

Type NFG MSPart No. 785 260Dimensions

785 261 INFL MS

Type INFL MSPart No. 785 261DiameterTotal length

785 264 OEB NFG MS785 295 RFB NFG MS

Type OEB NFG MS RFB NFG MSPart No. 785 264 785 295Capacity (heating element)Dimensions

ReservoirMade of stainless steel, with cover and adjustable ventilation.

785 299 KKL B NFG MS

Type KKL B NFG MSPart No. 785 299Colour Blue1Dimensions

GRP Case, emptyMax. capacity:


785 399 HOEL 36 20 1100

Type HOEL 36 20 1100Part No. 785 399 +

N)Total length (lG)Volume (oil container)

Hand Oiler

785 398 VL HOEL 20 500

Type VL HOEL 20 500Part No. 785 398 +

N)Total length (lG)Diameter

Accessories for Hand Oiler for Switchgear Installations

Extension for Hand Oiler

-

Liability Insurance Association for the Energy, Textiles, Electric and Media Industry (BGETEM).• Based on DIN VDE 0681-1• Not suitable for use in wet weather conditions• For indoor and outdoor installations• For loosening and tightening screw plugs on cable sealing ends under live conditions• With interchangeable operating heads (straight and angled)• Delivered in a suitable transport case

MS Screw Driver Kit 2021

Wiederholungsp

rüfung

Nächste

785 265 SDS KEV MS

Type SDS KEV MSPart No. 785 265Dimensions

Screw Driver KitFully equipped plastic case

Further insulating element extensions, operating heads and special bits are available on request.

1

2

34

58

67

• • Transparent insulating hand oiler ensures increased safety• • If required, the insertion depth of the hand oiler can be increased by means of optional extensions

Hand Oiler for Switchgear Installations2021

Wiederholungsp

rüfung

Nächste

Parts list:Pos. Part No. Pos. Part No.1 785 298 5 785 2682 785 266 6 785 2693 7 785 2714 785 267 8 785 272For more detailed information

on these products, see single parts.


785 272 BIT 8 SD KEV MS

785 298 KKL SDS KEV MS

Type KKL SDS KEV MSPart No. 785 298Colour Black1Dimensions

Single Parts for MS Screw Driver Kit

Plastic Case, emptyWith foam padding.

785 266 BS SD KEV MS 1120

Type BS SD KEV MS 1120Part No. 785 266DiameterDimensions

Operating Stick with adjustable HandleWith plug-in coupling for extending the handle, hand guard, insulating element, red ring and extension.

785 273 VL 350 SD KEV MS

Type VL 350 SD KEV MSPart No. 785 273DiameterDimensions

ExtensionFor operating sticks.

785 267 AK SD KEV MS

Type AK SD KEV MSPart No. 785 267DiameterDimensions

Straight Operating HeadWith hexagon socket for attaching special bits and special screw plugs.

785 268 AK SD W30 KEV MS

Type AK SD W30 KEV MSPart No. 785 268DiameterDimensions

30° angled Operating HeadWith hexagon socket for attaching special bits and special screw plugs.

785 269 AK SD W70 KEV MS

Type AK SD W70 KEV MSPart No. 785 269DiameterDimensions

70° angled Operating HeadWith hexagon socket for attaching special bits and special screw plugs.

785 271 BIT 13 SD KEV MS

Type BIT 13 SD KEV MS BIT 8 SD KEV MSPart No. 785 271 785 272DiameterTotal length

Special Bit 13 mm and 8 mmWith safety plug-in system suitable for AK SD ... operating heads.

1

2

3

4

5

6

7 8


For cable sealing ends• Not suitable for use in wet weather conditions• For indoor and outdoor installations• • For use with AK SD ... operating heads• With safety plug-in system•

Special Screw Plugs

Special screw plugs for cable sealing ends from other manufacturers are available on request.

785 281 VS F&G M22 F

Type VS ... F&G M22 FPart No. 785 281Dimensions

Special Screw Plug (F & G)For cable sealing ends.

785 282 VS KOET M10

Type VS ... KOET M10Part No. 785 282Dimensions

Special Screw Plug (Köttgen)For cable sealing ends.

785 283 VS RAY M14

Type VS ... RAY M14Part No. 785 283Dimensions

Special Screw Plug (Raychem)For cable sealing ends.

785 284 VS GOW M12

Type VS ... GOW M12Part No. 785 284Dimensions

Special Screw Plug (GOW)For cable sealing ends.


Protective and Auxiliary Equipment

Prot

ecti

ve a

nd A

uxili

ary

Equi

pmen

t

PPE – Personal Protective Equipment

785 427 SSC ASH NS

785 427 4013364086838 5-8-2 300 g 1 pc(s)

Type SSC ASH NSPart No. 785 427Nominal voltage up to (UN)SizeVisible Light Transmittance (VLT)PU

Face Shield with Strap• In accordance with DIN EN 166 • Arc-fault-tested in accordance with GS-ET-29 test principle • High Visible Light Transmittance (VLT)• Coating on both sides prevents misting up, polished edges, 1.5 mm thick• The face shield can be locked into the use and non-use position• Suitable for all standard safety helmets for electricians

785 645 NHS AG 00 3 NS

785 645 4013364086869 5-8-2 420 g 1 pc(s)

Type NHS AG 00 3 NSPart No. 785 645Nominal voltage up to (UN)PU

NH Fuse Puller with Sleeve• In accordance with DIN VDE 0680-4 and GS-ET-38• For fuses sizes NH00, 1, 2 and 3

785 491 IHS 00 M 9 NS785 492 IHS 00 M 10 NS785 493 IHS 0 M 9 NS785 494 IHS 0 M 10 NS

785 491 4013364088306 5-8-2 140 g 1 Pa785 492 4013364086883 5-8-2 140 g 1 Pa785 493 4013364088894 5-8-2 160 g 1 Pa785 494 4013364088320 5-8-2 160 g 1 Pa

Type IHS 00 M 9 NS IHS 00 M 10 NS IHS 0 M 9 NS IHS 0 M 10 NSPart No. 785 491 785 492 785 493 785 494Nominal voltage up to (UN)SizePU

Insulating Gloves, Category M• In accordance with EN 60903 (DIN VDE 0682-311)

785 495 IHS 00 RC 9 NS785 496 IHS 00 RC 10 NS

785 495 4013364088900 5-8-2 290 g 1 Pa785 496 4013364088917 5-8-2 290 g 1 Pa

Type IHS 00 RC 9 NS IHS 00 RC 10 NSPart No. 785 495 785 496Nominal voltage up to (UN)SizePU

Insulating Gloves, Category RC• In accordance with EN 60903 (DIN VDE 0682-311)

785 490 AT IHS NS

785 490 4013364086890 5-8-2 240 g 1 pc(s)

Type AT IHS NSPart No. 785 490Colour Brown1DimensionsPU

Accessories for PPE – Personal Protective Equipment

Storage Bag, emptyWith hook-and-loop fastener and hook

785 497 PHSP NS

785 497 4013364088924 5-8-2 660 g 1 pc(s)

Type PHSP NSPart No. 785 497Colour Grey1PU

Pneumatic Glove TesterFor performing tests required by the standard



Prot

ecti

ve a

nd A

uxili

ary

Equi

pmen

t

Based on DIN VDE 0681-1• For live maintenance and repair work on airport lighting systems

Insulating Equipment for Airport Lighting Systems

785 408 IW 17.5 890 650 180

785 408 4013364117914 5-8-1 9.8 kg 1 pc(s)

Type IW 17.5 890 650 180Part No. 785 408Nominal voltage up to (UN)DimensionsPU

IW Insulated Platform• For insulating the operating location• For inset lights up to a maximum diameter of 255 mm•

• Two removable kneeling cushions for comfortable working• Replacable skids for easy positioning and transport

785 440 IE UF LF 150785 441 IE UF LF 200

785 440 4013364127524 5-8-1 2.25 kg 1 pc(s)785 441 4013364127531 5-8-1 2.2 kg 1 pc(s)

Type IE UF LF 150 IE UF LF 200Part No. 785 440 785 441Nominal voltage up to (UN)DiameterDimensionsPU

Insulating Insert for Inset Lights• For use as protection to earth• For use as tool tray

785 445 IV VK13 SW17 1000

785 445 4013364127548 5-8-1 1.07 kg 1 pc(s)

Type IV VK13 SW17 1000Part No. 785 445Nominal voltage up to (UN)LengthPU

Insulating Extension• For installation work (without IW insulating platform for standing surface insulation) on inset lights

• Protection against accidental and direct contact with live parts• For covering adjacent live parts• Available in different lengths, widths, thicknesses and colours• Insulating rubber mats for insulating the operating location

Covering Material and Insulating Mats

785 465 ATK 135 50M NS785 466 ATK 135 ..M NS

785 465 4013364088733 5-8-2 41.5 kg 1 pc(s)785 466 4013364088030 5-8-2 0.83 g 1 mm

Type ATK 135 50M NS ATK 135 ..M NSPart No. 785 465 785 466Nominal voltage up to (UN)Length Any up to 50 m *)

WidthThicknessColourPU

Covering Material (Crystal Clear Plastic)According to EN/IEC 61112 (DIN VDE 0682-511).



Prot

ecti

ve a

nd A

uxili

ary

Equi

pmen

t

785 467 ATK 120 25M NS785 468 ATK 120 ..M NS

785 467 4013364088740 5-8-2 38 kg 1 pc(s)785 468 4013364088757 5-8-2 1.64 g 1 mm

Type ATK 120 25M NS ATK 120 ..M NSPart No. 785 467 785 468Nominal voltage up to (UN)Length Any up to 25 m *)

WidthThicknessColourPU

Covering Material (Transparent Plastic)In accordance with EN/IEC 61112 (DIN VDE 0682-511).

785 471 ATN 140 10M NS785 472 ATN 140 ..M NS

785 471 4013364088764 5-8-2 20 kg 1 pc(s)785 472 4013364087057 5-8-2 1.95 g 1 mm

Type ATN 140 10M NS ATN 140 ..M NSPart No. 785 471 785 472Nominal voltage up to (UN)Length Any up to 10 m *)

WidthThicknessColour Red1 Red1PU

Covering Material (EPDM Elastomer)In accordance with EN/IEC 61112 (DIN VDE 0682-511).

785 646 WBN 200 2,5M NS

785 646 4013364089174 5-8-2 760 g 1 pc(s)

Type WBN 200 2,5M NSPart No. 785 646Nominal voltage up to (UN)LengthWidthThicknessColour Red1PU

Wrapping Tape (EPDM Elastomer) According to EN/IEC 61112 (DIN VDE 0682-511).For covering insulators.

785 455 IMG SI 1M NS785 457 IMG SI 10M NS785 456 IMG SI ..M NS

785 455 4013364088337 5-8-2 3.6 kg 1 pc(s)785 457 4013364087880 5-8-2 36 kg 1 pc(s)785 456 4013364086821 5-8-2 3.6 g 1 mm

Type IMG SI 1M NS IMG SI 10M NS IMG SI ..M NSPart No. 785 455 785 457 785 456Nominal voltage up to (UN)Length Any up to 10 m *)

WidthThicknessColour Grey1 Grey1 Grey1PU

Insulating Rubber Mats for Insulating the Operating LocationIn accordance with EN/IEC 61112 (DIN VDE 0682-511).

785 459 IMG SAN 1M 10M785 458 IMG SAN 1M ..M

785 459 4013364115057 5-8-2 56 kg 1 pc(s)785 458 4013364115064 5-8-2 5.8 g 1 mm

Type IMG SAN 1M 10M IMG SAN 1M ..MPart No. 785 459 785 458Nominal voltage up to (UN)Length Any up to 10 m *)

WidthThicknessColour Grey1 Grey1PU

Insulating Mats up to 50 kVFor use in electrical switch and test rooms.Dielectric strength of 50 kV, tested according to DIN VDE 0303-21.

*)



Prot

ecti

ve a

nd A

uxili

ary

Equi

pmen

t

785 647 KK 35 NS

785 647 4013364087040 5-8-2 73 g 1 pc(s)

Type KK 35 NSPart No. 785 647Max. clamping rangeDimensionsMaterial PlasticPU

Accessories for Covering Material and Insulating Mats

ClipWith insulated steel spring.

785 648 HK 8 NS

785 648 4013364088047 5-8-2 19 g 1 pc(s)Type HK 8 NSPart No. 785 648Dimensions ØMaterial PlasticPU

Hook

785 649 OEK 12 NS

785 649 4013364088054 5-8-2 2 g 1 pc(s)

Type OEK 12 NSPart No. 785 649Dimensions ØMaterial PlasticPU

EyeConsists of two elements


Passive Arc Fault Protection – DEHNcare®

Pass

ive

Arc

Fau

lt P

rote

ctio

n


Arc Fault Protection

• For maintenance and repair work on electrical installations• For protection against thermal and mechanical risks according to DIN EN 407 and DIN EN 388• Arc-fault-tested: Box test, class 2*) (423 kJ/m2) according to EN 61482-1-2 (DIN VDE 0682-306-1-2)• ATPV: 32.8 cal/cm2 (leather), 45 cal/cm2 (interlock knitwear, coated) in accordance with IEC 61482-1-1

(DIN VDE 0682-306-1-1)• • • •

DEHNcare® APG

785 808 APG 8 L785 809 APG 9 L785 810 APG 10 L785 811 APG 11 L785 812 APG 12 L

785 808 4013364242265 5-8-0 250 g 1 Pa785 809 4013364242296 5-8-0 270 g 1 Pa785 810 4013364242302 5-8-0 290 g 1 Pa785 811 4013364242319 5-8-0 310 g 1 Pa785 812 4013364242326 5-8-0 330 g 1 Pa

Type APG ... 8 L 9 L 10 LPart No. 785 808 + 785 809 + 785 810 +Total lengthSizePU

*)

Arc-Fault-Tested Protective Gloves with long Gauntlet

Measure correctly

Glove size

SizeCircumferencearound your

knuckles 8 20.3 cm 9 22.9 cm10 25.4 cm11 27.9 cm12 30.5 cm

785 796 APG 8785 797 APG 9785 798 APG 10785 799 APG 11785 800 APG 12

785 796 4013364124912 5-8-0 163 g 1 Pa785 797 4013364124936 5-8-0 169 g 1 Pa785 798 4013364124943 5-8-0 180 g 1 Pa785 799 4013364124950 5-8-0 196 g 1 Pa785 800 4013364131019 5-8-0 202 g 1 Pa

Type APG ... 8 9 10Part No. 785 796 785 797 785 798Total lengthSizePU

Arc-fault-tested Protective Gloves

Type APG ... 11 12Part No. 785 799 785 800Total lengthSizePU

Type APG ... 11 L 12 LPart No. 785 811 + 785 812 +Total lengthSizePU



Pass

ive

Arc

Fau

lt P

rote

ctio

n

785 755 APC 48 50785 756 APC 52 54785 757 APC 56 58785 758 APC 60 62


Type APC 48 50 APC 52 54 APC 56 58 APC 60 62Part No. 785 755 785 756 785 757 785 758 +Direct incident energy (Eio) 2 2 2 2

Extended direct incident energy (Eio)(class 2*)

2(class 2*)

2(class 2*)

2(class 2*)

2

Arc energy (Warc)SizePU

*)

Arc-Fault-Tested Protective Coat• Reinforced stand-up collar• Useful side arm pockets• Zip and hook-and-loop fasteners

• • Flame-retardant zip and hook-and-loop fasteners• •

DEHNcare® APJ, APT and APC

785 769 APJ 46785 770 APJ 48785 771 APJ 50785 772 APJ 52785 773 APJ 54785 774 APJ 56785 775 APJ 58

785 769 4013364152007 5-8-0 1.67 kg 1 pc(s)785 770 4013364149458 5-8-0 1.71 kg 1 pc(s)785 771 4013364149465 5-8-0 1.86 kg 1 pc(s)785 772 4013364149472 5-8-0 1.89 kg 1 pc(s)785 773 4013364149489 5-8-0 1.9 kg 1 pc(s)785 774 4013364149502 5-8-0 1.94 kg 1 pc(s)785 775 4013364149519 5-8-0 1.96 kg 1 pc(s)

Type APJ 46 APJ 48 APJ 50 APJ 52Part No. 785 769 785 770 785 771 785 772SizePU

*)

General technical data:Direct incident energy (Eio) 2

Extended direct incident energy (Eio) 2

Arc energy (Warc)

Arc-Fault-Tested Protective Jacket• Reinforced stand-up collar• Useful side arm pockets• Zip and hook-and-loop fastener

785 779 APT 46785 780 APT 48785 781 APT 50785 782 APT 52785 783 APT 54785 784 APT 56785 785 APT 58

785 779 4013364151994 5-8-0 1.49 kg 1 pc(s)785 780 4013364149526 5-8-0 1.54 kg 1 pc(s)785 781 4013364149533 5-8-0 1.63 kg 1 pc(s)785 782 4013364149540 5-8-0 1.66 kg 1 pc(s)785 783 4013364149557 5-8-0 1.76 kg 1 pc(s)785 784 4013364149564 5-8-0 1.8 kg 1 pc(s)785 785 4013364149571 5-8-0 2.04 kg 1 pc(s)

Type APT 46 APT 48 APT 50 APT 52Part No. 785 779 785 780 785 781 785 782SizePU

*)

General technical data:Direct incident energy (Eio) 2

Extended direct incident energy (Eio) 2

Arc energy (Warc)

Arc-Fault-Tested Protective Trousers• • Pockets for knee pads•

Type APJ 54 APJ 56 APJ 58Part No. 785 773 785 774 785 775SizePU

Type APT 54 APT 56 APT 58Part No. 785 783 785 784 785 785SizePU



Pass

ive

Arc

Fau

lt P

rote

ctio

n

785 788 APA B

785 788 4013364149588 5-8-0 112 g 1 pc(s)

Type APA BPart No. 785 788Colour Black1PU

Accessories for DEHNcare® APJ, APT and APC

Pair of Braces

785 789 APA KP

785 789 4013364149595 5-8-0 75 g 1 Pa

Type APA KPPart No. 785 789Material FoamPU

Knee Pads

Part No. SizeA

Body heightB

Chest circumferenceC

Waist circumferenceD

Hip circumferenceE

Inner leg length

Arc-Fault-Tested Protective Jacket and Trousers

785 769 / 785 779 46 / S 169-174 cm 92-95 cm 79-82 cm 92-95 cm 77.5-80 cm785 770 / 785 780 48 / M 172-177 cm 96-100 cm 83-86 cm 96-99 cm 79-81.5 cm785 771 / 785 781 50 / M 175-180 cm 101-103 cm 87-90 cm 100-103 cm 80.5-83 cm785 772 / 785 782 52 / L 178-183 cm 104-107 cm 91-94 cm 104-107 cm 82-84.5 cm785 773 / 785 783 54 / XL 180-185 cm 108-111 cm 95-98 cm 108-111 cm 83-85.5 cm785 774 / 785 784 56 / XXL 182-187 cm 112-115 cm 99-102 cm 112-115 cm 84-86.5 cm785 775 / 785 785 58 / XXXL 184-189 cm 116-119 cm 103-107 cm 116-119 cm 85-87.5 cm

Arc-Fault-Tested Protective Coat

785 755 48 / 50 172-180 cm 96-103 cm 83-90 cm — —785 756 52 / 54 178-185 cm 104-111 cm 91-98 cm — —785 757 56 / 58 182-189 cm 112-119 cm 99-107 cm — —785 758 60 / 62 186-191 cm 120-127 cm 108-117 cm — —

A Body height

Stand without shoes, e.g. at a wall and measure from tip to toe.

B Chest circumference

Measure horizontally at the largest width of chest.

C Waist circumference

Measure horizontally around the waist.

D Hip circumference

E Inner leg length

Measure along the leg from crotch to the ground.

B

D

CA

E

Measure correctly



Pass

ive

Arc

Fau

lt P

rote

ctio

n

• High wearing comfort• • • Face shield with clip for easy insertion into the helmet •

DEHNcare® ESH and APS

785 740 ESH 1000 S Y785 741 ESH 1000 S W785 742 ESH 1000 S O785 743 ESH 1000 S B785 744 ESH 1000 S R

785 740 4013364138360 5-8-0 336 g 1 pc(s)785 741 4013364138377 5-8-0 336 g 1 pc(s)785 742 4013364138384 5-8-0 336 g 1 pc(s)785 743 4013364138391 5-8-0 336 g 1 pc(s)785 744 4013364138407 5-8-0 336 g 1 pc(s)

Type ESH 1000 S Y ESH 1000 S W ESH 1000 S O ESH 1000 S B ESH 1000 S RPart No. 785 740 785 741 785 742 785 743 785 744Colour Yellow1 White2 Orange1 Blue1 Red1PU

Safety Helmet for Electricians• Electrically insulating safety helmet for electricians (EN 50365)• • With slot for APS ... SC face shield• • • ABS plastic shell

785 746 APS CL2 SC785 747 APS 12C SC

785 746 4013364138414 5-8-0 379 g 1 pc(s)785 747 4013364138421 5-8-0 379 g 1 pc(s)

Type APS CL2 SC APS 12C SCPart No. 785 746 785 747

2 2

— 2

PU

Arc-fault-tested Face Shield with Clip and Chin Protector• In accordance with DIN EN 166 and EN 170 • Arc-fault-tested in accordance with GS-ET-29 and ASTM F2178• • High degree of protection and wear resistance• • Fits the slot in the ESH safety helmet for electricians

785 748 APS CL2 FS785 749 APS 12C FS

785 748 4013364138438 5-8-0 388 g 1 pc(s)785 749 4013364138445 5-8-0 388 g 1 pc(s)

Type APS CL2 FS APS 12C FSPart No. 785 748 785 749

2 2

— 2

PU

Arc-fault-tested Face Shield with Strap and Chin Protector• In accordance with DIN EN 166 and EN 170 • Arc-fault-tested in accordance with GS-ET-29 and ASTM F2178 • • High degree of protection and wear resistance• •

785 751 KR ESH 1000

785 751 4013364157279 5-8-2 16 g 1 pc(s)

Type KR ESH 1000Part No. 785 751TypePU

Accessories for DEHNcare® ESH and APS

Chin Strap

785 752 SB ESH 1000 S

785 752 4013364245082 5-8-0 67.8 g 1 Sa

Type SB ESH 1000 SPart No. 785 752 +Material Hydro-Flock (S31F) PVC (S31P)PU

SweatbandReplacement part for ESH 1000 ... safety helmet for electricians.

785 753 VH SC APS

785 753 4013364245143 5-8-0 103 g 1 pc(s)

Type VH SC APSPart No. 785 753 +Material PlasticPU

Visor Holder with ClipFor arc-fault-tested face shields with clip.


Active Arc Fault Protection

Act

ive

Arc

Fau

lt P

rote

ctio

n

Arc fault protection system DEHNshort for detecting and extinguishing arc faults.

Fixed Arc Fault Protection System DEHNshort

782 030 DSRT DD CPS BACA782 031 DSRT DD CPS AACA

782 030 4013364245792 5-8-5 1.2 kg 1 pc(s)782 031 4013364245815 5-8-5 1.2 kg 1 pc(s)

Type DSRT ... DD CPS BACA DD CPS AACAPart No. 782 030 + 782 031 +Min. / max. voltage (UN)Degree of protection (front side)Degree of protection (rear side)Dimensions of the front plate (H x W)Mounting dimensions (H x W x D)

Sensor inputs S1, S2, S3, S4 (3 sensors (DSRT PS) can beconnected per channel)

S1, S2, S3, S4 (3 sensors (DSRT PS) can beconnected per channel)

Current inputs 1 A / 5 A (IL1, IL2, IL3, Io) 1 A / 5 A (IL1, IL2, IL3, Io)Binary inputs 24 V d.c., 3 mA (BI1, BI2) 24 V d.c., 3 mA (BI1, BI2)Tripping relay Up to 250 V a.c./d.c. 5 A (T1, T2, T3, T4) Up to 250 V a.c./d.c. 5 A (T1, T2, T3, T4)High-speed outputs Up to 250 V a.c./d.c. 2 A (HS01, HS02) Up to 250 V a.c./d.c. 2 A (HS01, HS02)Short-circuiter outputsBinary outputOperating temperature range (TU)Tripping time of the relay 7 ms 7 msTripping time HSO < 2 ms < 2 ms

< 2 ms < 2 msTripping time until short-ciruit < 5 ms with DSRT QD < 5 ms with DSRT QDPU

Detection Device (Current+Light)DSRT DD CPS .... detection device for current and light detection (DSRT PS point sensors) including output for directly connecting two DSRT QD short-circuiter units.

782 040 DSRT DD PS BACA782 041 DSRT DD PS AACA

782 040 4013364245822 5-8-5 776 g 1 pc(s)782 041 4013364245839 5-8-5 776 g 1 pc(s)

Type DSRT ... DD PS BACA DD PS AACAPart No. 782 040 + 782 041 +Min. / max. voltage (UN)Degree of protection (front side)Degree of protection (rear side)Dimensions of the front plate (H x W)Mounting dimensions (H x W x D)

Sensor inputs S1, S2, S3, S4 (3 sensors (DSRT PS) can beconnected per channel)

S1, S2, S3, S4 (3 sensors (DSRT PS) can beconnected per channel)

Binary inputs 24 V d.c., 3 mA (BI1, BI2) 24 V d.c., 3 mA (BI1, BI2)Tripping relay Up to 250 V a.c./d.c. 5 A (T1, T2, T3, T4) Up to 250 V a.c./d.c. 5 A (T1, T2, T3, T4)Short-circuiter outputsBinary outputOperating temperature range (TU) -35 °C ... +70 °CTripping time of the relay 7 ms 7 ms

< 2 ms < 2 msTripping time until short-ciruit < 5 ms with DSRT QD < 5 ms with DSRT QDPU

Detection Device (Point Sensor)DSRT DD PS .... detection device for light detection (DSRT PS point sensors) including output for directly connecting two DSRT QD short-cir-cuiter units.

782 050 DSRT DD FS BAAA782 051 DSRT DD FS AAAA

782 050 4013364245846 5-8-5 844 g 1 pc(s)782 051 4013364245853 5-8-5 844 g 1 pc(s)

Type DSRT ... DD FS BAAA DD FS AAAAPart No. 782 050 + 782 051 +Min. / max. voltage (UN)Degree of protection (front side)Degree of protection (rear side)Dimensions of the front plate (H x W)Mounting dimensions (H x W x D)

Sensor inputs can be connected per channel) connected per channel)

Binary inputs 24 V d.c., 3 mA (BI1, BI2) 24 V d.c., 3 mA (BI1, BI2)Tripping relay Up to 250 V a.c./d.c. 5 A (T1, T2, T3, T4) Up to 250 V a.c./d.c. 5 A (T1, T2, T3, T4)Binary outputOperating temperature range (TU) -35 °C ... +70 °CTripping time of the relay 7 ms 7 msTripping time until short-ciruit < 5 ms with DSRT QD < 5 ms with DSRT QDPU

Detection Device (Loop)



Act

ive

Arc

Fau

lt P

rote

ctio

n

782 060 DSRT PS

782 060 4013364245860 5-8-5 27 g 1 pc(s)

Type DSRT ... PSPart No. 782 060 +Dimensions (L x W x H)

Arc current threshold (Iparc) 5 kADetection radius 90° (180°)Arc current distance max. 2 m (0.5 m)Sensor wiring Two cores and shielding

Twisted pair, 0.75 mm², shieldedMax. sensor cable length per sensor cableDegree of protectionOperating temperature range (TU)PU

Point SensorDSRT PS point sensor for arc detection. Serial connection of max. 3 sensors at each sensor input of DSRT DD CPS and DSRT DD PS devices.

782 075 DSRT FS 5782 080 DSRT FS 10782 090 DSRT FS 15

782 075 4013364245877 5-8-5 34 g 1 pc(s)782 080 4013364245884 5-8-5 67 g 1 pc(s)782 090 4013364245891 5-8-5 101 g 1 pc(s)

Type DSRT ... FS 5 FS 10 FS 15Part No. 782 075 + 782 080 + 782 090 +Sensor lengthDiameterBending radiusArc current threshold (Iparc) 5 kA 5 kA 5 kADetection radiusArc current distance max. 2 m max. 2 m max. 2 mOperating temperature range (TU)PU

Fibre Optic Sensor

782 000 DSRT QD

782 000 4013364239401 5-8-5 4.03 kg 1 pc(s)

Type DSRT ... QDPart No. 782 000 +Min. / max. voltage (UN) 400 V (-20% / + 10%) 50 HzDimensions (H x W x D)Prospective short-circuit current 5-80 kA (factor 2.2)

Max. short-circuit time 50 ms (at 80 kA), 70 ms (at 50 kA)Degree of protectionPU

Short-CircuiterShort-circuiter unit for direct connection to DSRT DD CPS and DSRT DD PS detection devices or to external detection devices via the DSRT

782 020 DSRT LWL 0.75782 022 DSRT LWL 2.00782 024 DSRT LWL 4.00782 028 DSRT LWL 8.00

782 020 4013364236509 5-8-5 10 g 1 Sa782 022 4013364236516 5-8-5 20 g 1 Sa782 024 4013364237193 5-8-5 36 g 1 Sa782 028 4013364237223 5-8-5 66 g 1 Sa

Type DSRT ... LWL 0.75 LWL 2.00 LWL 4.00 LWL 8.00Part No. 782 020 + 782 022 + 782 024 + 782 028 +LengthDiameterPU

Fibre Optic Cable

optic converters and DSRT QD short-circuiter units.1 set = 2 pieces

782 010 DSRT LWL U

782 010 4013364230804 5-8-5 105 g 1 pc(s)

Type DSRT ... DSRT LWL UPart No. 782 010 +Supply voltageDegree of protectionOperating temperature range (TU)PU

Fibre Optic Converter

DSRT QD short-circuiter units.



Act

ive

Arc

Fau

lt P

rote

ctio

n

Modular arc fault protection system DEHNarc for low-voltage distribution boards in transformer stations.

Consisting of:• Three sensor supports mounted in the installation• Special NH fuse switch disconnector mounted in the installation• Two short-circuiting cartridges and disconnecting blade (mobile)• Control unit with three sensors (mobile)

Mobile Arc Fault Protection System DEHNarc

781 000 DARC STG

781 000 4013364151086 5-8-4 12 kg 1 pc(s)

Type DARC ... STGPart No. 781 000Nominal voltage (UN)Degree of protectionPU

Control Unit• Visual detection of an arc fault by means of three sensors and activation of the short-circuiting cartridges• Visual and acoustic indication of the activation• Self-testing element

781 020 DARC KSP

781 020 4013364148451 5-8-4 1.36 kg 1 pc(s)

Type DARC ... KSPPart No. 781 020Nominal voltage (UN)Prospective short-circuit currentMin. short-circuit time at 25 kADynamic short-circuit strengthSizeDegree of protectionPU

Short-Circuiting Cartridge• Short-circuiting cartridge with disconnector cover for use in fuse switch disconnectors and for short-circuiting after receiving the signal

of the control unit

781 010 DARC TRM

781 010 4013364148444 5-8-4 516 g 1 pc(s)

Type DARC ... TRMPart No. 781 010Nominal voltage (UN)Prospective short-circuit currentMin. short-circuit time at 25 kADynamic short-circuit strengthSizeDegree of protectionPU

Disconnecting Blade• Disconnecting blade with disconnector cover for use in fuse switch disconnectors. Galvanic connection between the busbar and the

control unit.

781 030 DARC KST

781 030 4013364149113 5-8-4 1.4 kg 1 pc(s)

Type DARC ... KSTPart No. 781 030Tightening torquePU

Junction Piece• Mounted in the fuse block to ensure mechanical connection between the short-circuiting cartridges and the disconnecting blade

781 230 DARC PK KSP

781 230 4013364153813 5-8-4 18.9 kg 1 pc(s)

Type DARC ... PK KSPPart No. 781 230Nominal voltage (UN)Degree of protectionPU

Test Kit• Test kit for testing the short-circuiting cartridges and the disconnecting blade for correct operation

Note: The disconnecting blades must be ordered separately.



Act

ive

Arc

Fau

lt P

rote

ctio

n

781 100 DARC LSDH

781 100 4013364148437 5-8-4 355 g 1 pc(s)

Type DARC ... LSDHPart No. 781 100DesignLengthPU

Light Sensor Spacer with plug-in Coupling

781 110 DARC HV STG

781 110 4013364149120 5-8-4 105 g 1 pc(s)

Type DARC ... HV STGPart No. 781 110Material PlasticPU

Retaining Device for the Control UnitThe retaining device is connected to the DIN rail by means of the two plastic locking bolts.

781 130 DARC VL 4 1000781 150 DARC VL 4 1500

781 130 4013364152144 5-8-4 67.3 g 1 pc(s)781 150 4013364152175 5-8-4 93.8 g 1 pc(s)

Type DARC ... VL 4 1000 VL 4 1500Part No. 781 130 781 150Cable cross-section 2 2

LengthPU

Connecting Lines Control Unit – Short-Circuiting CartridgeConnecting lines between the DARC STG control unit and the DARC KSP short-circuiting cartridge.

781 170 DARC VL 10 500781 190 DARC VL 10 1000

781 170 4013364152182 5-8-4 104.4 g 1 pc(s)781 190 4013364152199 5-8-4 166.6 g 1 pc(s)

Type DARC ... VL 10 500 VL 10 1000Part No. 781 170 781 190Cable cross-section 2 2

LengthPU

Connecting Lines Control Unit – Disconnecting BladeConnecting lines between the DARC STG control unit and the DARC TRM disconnecting blade.

781 220 DARC TK

781 220 4013364151666 5-8-4 12.97 kg 1 pc(s)

Type DARC TKPart No. 781 220Degree of protectionDimensionsPU

Accessories for Mobile Arc Fault Protection System DEHNarc

Transport Case

With wheels and foam padding.



Act

ive

Arc

Fau

lt P

rote

ctio

n

Light Sensor Supports and Support Rails for DEHNarc

781 085 DARC LSH WB

781 085 4013364148420 5-8-4 383 g 1 pc(s)

Type DARC ... LSH WBPart No. 781 085Type With four bolts ans plastic dowelLengthPU

Wall-mounted Light Sensor Support with Plug-in CouplingTo be mounted in the upper part of the low-voltage equipment cabinet on a vertical wall.

781 090 DARC LSH SB

781 090 4013364148413 5-8-4 230 g 1 pc(s)

Type DARC ... LSH SBPart No. 781 090Type With M10 threaded pin and nut for C-railsLengthPU

Light Sensor Support with CouplingTo be mounted on the lower C-rail of the low-voltage equipment cabinet.

781 080 DARC LSH M10

781 080 4013364148284 5-8-4 270 g 1 pc(s)

Type DARC ... LSH M10Part No. 781 080Type With M10 threaded pin and nutLengthPU

Light Sensor Support with Plug-in CouplingTo be mounted in the hole of the light sensor support rail.

781 040 DARC LSHS L 940

781 040 4013364148390 5-8-4 894 g 1 pc(s)

Type DARC ... LSHS L 940Part No. 781 040TypeLengthPU

Light Sensor Support Rail, leftTo be mounted to the DIN rail in the upper part of the low-voltage equipment cabinet by means of a knurled nut.

781 060 DARC LSHS R 940

781 060 4013364148406 5-8-4 906 g 1 pc(s)

Type DARC ... LSHS R 940Part No. 781 060TypeLengthPU

Light Sensor Support Rail, rightTo be mounted to the DIN rail in the upper part of the llow-voltage equipment cabinet by means of a knurled nut.

No. 1804.

DEHN protects.


Service and Safety

Serv

ice

and

Safe

tyService and Safety

Further Equipment

• Regular maintenance tests ensure that your devices are in a good order and condition• Maintenance tests in DEHN + SÖHNE’s high-voltage test laboratory for operating and earthing sticks, voltage detectors, phase compara-

tors, devices for voltage detecting systems, earthing and short-circuiting devices• Test is documented on the device and in a separate test report

If the repair costs do not exceed € 100.00 net, we will automatically repair the device!

Contact

DEHN + SÖHNE Standort 2Service Centre (returns)Am Ludwigskanal 192360 MühlhausenE-Mail [email protected]

Periodic Tests for Safety Devices at DEHN + SÖHNE

Part No. Item

Periodic tests of ...

799 971 Passive voltage detector for nominal voltages up to 30 kV (all brands) *

799 950 Voltage detector for nominal voltages up to 30 kV (all brands) *

799 951 Voltage detector for nominal voltages exceeding 30 kV [up to 132 kV / 50 Hz] (all brands) *

799 952 Voltage detector for overhead contact lines for nominal voltages up to 15 kV (all brands) *

799 953 Voltage detector for voltage ranges up to 30 kV (all brands) *

799 954 Voltage detector for voltage ranges exceeding 30 kV [up to 132 kV / 50 Hz] (all brands) *

799 955 Voltage detector for voltage ranges up to 30 kV – switchable / standby / test kit (all brands) *

799 956 Voltage detector for voltage ranges exceeding 30 kV [up to 132 kV / 50 Hz] – switchable / standby (all brands) *

799 957 Distance voltage detector (D+S devices only)

799 958 Capacitive voltage detecting system (all brands) Note: Passive voltage indicators are not tested!

799 959 Two-pole resistive phase comparator up to 36 kV (D+S devices only) **

799 960 Single-pole capacitive phase comparator up to 36 kV (D+S devices only) *

799 961 Single-pole capacitive phase comparator (switchable) up to 36 kV (D+S devices only) *

799 962 Resistive d.c. voltage detector with one stick (D+S devices only)

799 963 Resistive d.c. voltage detector with two sticks (D+S devices only)

799 964 Operating stick [fuse tong, insulating stick, switching stick and rescue rod] (all brands)

799 965 Operating stick kit (all brands)

799 966 Additional test prod for voltage detectors and two-pole phase comparators

799 967 Test probe

Periodic tests (visual and technical) of ...

799 990 Single-pole earthing and short-circuiting device

799 991 Three-pole earthing and short-circuiting device

Technical test of ...

799 992 Earthing stick (all brands)

799 993 Test adapter / measuring impedance for capacitive voltage detecting system (all brands)

* including one test prod / ** including two test prods

2021

Wiederholungsp

rüfung

Nächste

DEHN protects.


Measuring Devices

Mea

suri

ng D

evic

es

• Mobile measuring system for periodic technical tests of portable earthing and short-circuiting devices (EaS)• For determining minimum ohmic resistances of earthing and short-circuiting devices and the quality of electrical connections e.g. in case

of conductor rails or switch contacts• Electronic transfer of measured values to the evaluation software via USB interface• Software-aided procedure and automatic documentation of results • Acoustic signal as soon as the limit values are exceeded• Calibrated when delivered• Software update via USB interface

799 100 MOMS LORE EUK

799 100 4013364237094 5-7-6 12.2 kg 1 pc(s)

Typ Part No. +

Measuring rangeMin. resolutionMeasuring accuracyType of measurementMeasuring currentInterfaceDimensions (case) (H x W x D)Weight (with accessories)Temperature rangePU

DEHN protects.


Voltage Limiting Devices

SDS

Spark-gap-based voltage limiting device for use in electric railways.• Electrical isolation of insulated track sections and earthed parts of installations• Safe equipotential bonding in case of a short circuit or earth fault at the overhead contact line due to high-current-resistant welding of

the electrodes• Discharge of overvoltage without short-circuit formation

Voltage Limiters

923 110 SDS 1

923 110 4013364092426 5-7-4 40 g 10 pc(s)

Type SDS ... 1Part No. 923 110Power frequency sparkover voltage (Uaw)d.c. sparkover voltage (Uag)Impulse sparkover voltage

Safe short-circuit due to welding of the electrodes in case of alternating currents Safe short-circuit due to welding of the electrodes in case of direct currentsShort-circuit withstand capability rms rms

PU

SDS 1

923 117 SDS 2

923 117 4013364093478 5-7-4 42 g 10 pc(s)

Type SDS ... 2Part No. 923 117d.c. sparkover voltage (Uag)Impulse sparkover voltage

Safe short-circuit due to welding of the electrodes in case of direct currentsShort-circuit withstand capability rms rms

PU

SDS 2Voltage limiting device for a d.c. sparkover voltage of 350 V.

923 116 SDS 3

923 116 4013364085978 5-7-4 42 g 10 pc(s)


Short-circuit withstand capability rms

PU


923 118 SDS 4

923 118 4013364104969 5-7-4 38.3 g 10 pc(s)



PU



Voltage Limiting Devices

SDS

923 119 SDS 5

923 119 4013364104976 5-7-4 38.3 g 10 pc(s)



PU


723 199 MA SDS M12

723 199 4013364151703 5-7-4 750 g 1 pc(s)

Type MA SDS M12Part No. 723 199Dimensions of the threaded pinMaterial BrassDegree of protection of the inner enclosurePU

Accessories for Voltage Limiting Devices

Mast Adapter for SDS Voltage Limiting Devices


Barriers

Barr

iers

700 099 AB 32 46 RW K L...

700 099 4013364157415 5-1-8 1.28 g 1 mm

Type AB 32 46 RW K L...Part No. 700 099Material Glass-fibre reinforced polyester Dimensions (W x H) 32 x 46 mmLength Any up to 6000 mm *) PU 1 mm

*) Length must be specified when ordering!

BarrierRobust design, suitable for indoor and outdoor installations.

700 098 H AB 32 46 K

700 098 4013364157422 5-1-8 180.3 g 1 Sa

Type H AB 32 46 KPart No. 700 098Material Plastic PU 1 Set

Barrier Holder1 set = 2 pieces

Barriers and Accessories

DEHN protects.


Discharge Devices

Dis

char

ge D

evic

es

Single-pole earthing and discharge devices for earthing and short-circuiting statically charged electrical installations at the work location in accordance with EN 50110 (DIN VDE 0105-100).

Single-pole Earthing and Discharge Devices

758 020 EV TES 465 EK

758 020 4013364098992 5-7-2 1.34 kg 1 pc(s)Type EV ... TES 465 EKPart No. 758 020Cable cross-section 2

Total length (lG)Clamping rangePU

Discharge Device with Handle and Earth Clamp with Wing Bolt

758 021 EV TES 465 EZ

758 021 4013364099005 5-7-2 1.1 kg 1 pc(s)Type EV ... TES 465 EZPart No. 758 021Cable cross-section 2


Discharge Device with Handle and Spring-loaded Earth Clamp

758 022 EV TES 465 KS10

758 022 4013364099012 5-7-2 650 g 1 pc(s)

Type EV ... TES 465 KS10Part No. 758 022Cable cross-section 2

Total length (lG)PU

Discharge Device with Handle and Cable Lug at the Earth Cable EndHole (Ø8.4 mm) and silicone cable.

758 001 EV TS 2000 EK

758 001 4013364004030 5-7-2 2.22 kg 1 pc(s)

Type EV ... TS 2000 EKPart No. 758 001Cable cross-section 2


Discharge Device with Earth Clamp with Wing Bolt

758 003 EV TS 2000 EZ

758 003 4013364004047 5-7-2 1.95 kg 1 pc(s)

Type EV ... TS 2000 EZPart No. 758 003Cable cross-section 2


Discharge Device with Spring-loaded Earth Clamp


Discharge Devices

Dis

char

ge D

evic

es

758 015 EV EH 1725 EK

758 015 4013364041608 5-7-2 2.62 kg 1 pc(s)

Type EV ... EH 1725 EKPart No. 758 015Cable cross-section 2


Earthing Device with Earth Clamp with Tommy BarFor round conductors (Ø12 ... 26.5 mm) of electrostatic precipitator systems

758 025 EV TES STK 1500 KS

758 025 4013364127838 5-7-2 1.49 kg 1 pc(s)

Type EV ... TES STK 1500 KSPart No. 758 025Cable cross-section 2

Total length (lG)PU

Discharge Device with Contact and Coupling Electrode and Cable Lug at the Earth Cable EndPK1 anti-rotation crimped cable lug (hole Ø12.5 mm).

758 031 EV TS 1470 SN7685

758 031 4013364229853 5-7-2 2.1 kg 1 pc(s)

Type EV ... TS 1470 SN7685Part No. 758 031 +Cable cross-section 2

Total length (lG)PU

Discharge Device with Contact Electrode and Cable Lug at the Earth Cable EndPK1 anti-rotation crimped cable lug (hole Ø12.5 mm).

758 028 EV EHB 1600 SN7114

758 028 4013364132450 5-7-2 4.16 kg 1 pc(s)Type EV ... EHB 1600 SN7114Part No. 758 028 +Cable cross-section 2

Total length (lG)PU

Discharge Device with Clamp and Cable Lug at the Earth Cable EndPK1 anti-rotation crimped cable lug (hole Ø12.5 mm).

Ø110 mm


Storage Bags and Transport Cases

Stor

age

Bags

and

Tra

nspo

rt C

ases

Sheet Metal Case767 701 SKL 95 21 10

767 701 4013364071292 5-1-7 5.7 kg 1 pc(s)

Type SKL 95 21 10Part No. 767 701DimensionsColour Blue1PU

Sheet Metal Case for PHE III

766 703 SKL 92 16 10766 603 SKL 116 16 10

766 703 4013364080379 5-1-7 5.03 kg 1 pc(s)766 603 4013364005860 5-1-7 6 kg 1 pc(s)

Type SKL 92 16 10 SKL 116 16 10Part No. 766 703 766 603DimensionsColour Blue1 Blue1PU

Sheet Metal Case for PHE

759 003 SKL 95 21 10 V2

759 003 4013364105942 5-1-7 6.2 kg 1 pc(s)

Type SKL 95 21 10 V2Part No. 759 003DimensionsColour Blue1PU

Sheet Metal Case for PHV

745 900 SBKL EKS VI KVS766 298 SBKL EKS TI KVS 2F766 300 SBKL EKS TI KVS


Type SBKL EKS VI KVS SBKL EKS TI KVS 2F SBKL EKS TI KVSPart No. 745 900 766 298 766 300DimensionsColour Blue1 Blue1 Blue1PU

Sheet Metal Case for Earthing and Short-Circuiting Device VI/TI Optionally available with foam padding

Plastic Case767 997 KKL PHE3767 999 KKL PHE3 L

767 997 4013364115682 5-1-7 2.42 kg 1 pc(s)767 999 4013364115262 5-1-7 3.4 kg 1 pc(s)

Type KKL PHE3 KKL PHE3 LPart No. 767 997 767 999DimensionsColour Black1 Black1PU

Plastic Case for PHE IIIWith foam padding

766 036 KKL PK PHE3 L

766 036 4013364105584 5-1-7 968 g 1 pc(s)

Type KKL PK PHE3 LPart No. 766 036DimensionsColour Grey1PU

Plastic Case for PHE III Indicator with Test ProdWith foam padding



Stor

age

Bags

and

Tra

nspo

rt C

ases

766 998 KKL PHE3 60 110

766 998 4013364115286 5-1-7 3.36 kg 1 pc(s)

Type KKL PHE3 60 110Part No. 766 998DimensionsColour Black1PU

Plastic Case for PHE III – KitWith foam padding.

766 997 KKL PHE766 999 KKL PHE L

766 997 4013364115699 5-1-7 2.39 kg 1 pc(s)766 999 4013364115279 5-1-7 3.32 kg 1 pc(s)

Type KKL PHE KKL PHE LPart No. 766 997 766 999DimensionsColour Black1 Black1PU

Plastic Case for PHEWith foam padding.

759 999 KKL PHV759 998 KKL PHV1

759 999 4013364115293 5-1-7 2.38 kg 1 pc(s)759 998 4013364115309 5-1-7 3.32 kg 1 pc(s)

Type KKL PHV KKL PHV1Part No. 759 999 759 998DimensionsColour Black1 Black1PU

Plastic Case for PHVWith foam padding.

767 107 KKL DCA767 106 KKL 26 22 5

767 107 4013364105577 5-1-7 880 g 1 pc(s)767 106 4013364073487 5-1-7 375 g 1 pc(s)

Type KKL DCA KKL 26 22 5Part No. 767 107 767 106DimensionsColour Grey1 Black1PU

Plastic Case for DEHNcapWith foam padding.

745 952 KK 56 41 17 EK VI TI745 902 KKL EKS VI KVS

745 952 4013364137066 5-6-2 4.9 kg 1 pc(s)745 902 4013364093591 5-6-2 1.62 kg 1 pc(s)

Type KK 56 41 17 EK VI TI KKL EKS VI KVSPart No. 745 952 745 902DimensionsColour Black1 Black1PU

Plastic Case for Earthing and Short-Circuiting Device VI/TI With foam padding.

745 953 KK 56 41 17 EK HK

745 953 4013364137073 5-6-2 4.95 kg 1 pc(s)

Type KK 56 41 17 EK HKPart No. 745 953DimensionsColour Black1PU

Plastic Case for Earthing StickWith retaining springs for two-part earthing stick.



Stor

age

Bags

and

Tra

nspo

rt C

ases

767 996 KLT 101 30 10766 996 KLT 133 34 10

767 996 4013364120181 5-1-7 2.3 kg 1 pc(s)766 996 4013364128170 5-1-7 4 kg 1 pc(s)

Type KLT ... 101 30 10 133 34 10Part No. 767 996 766 996DimensionsColour Black1 Black1PU

With shoulder strap and carrier handle.

766 602 KLT 247 10 22

766 602 4013364056626 5-1-7 1.31 kg 1 pc(s)

Type KLT ... 247 10 22Part No. 766 602DimensionsColour Black1PU

With carrier handle.

766 601 KLT 121 25 16

766 601 4013364056596 5-1-7 319 g 1 pc(s)

Type KLT ... 121 25 16Part No. 766 601DimensionsColour Black1PU


766 614 KLT 160 17

766 614 4013364056916 5-6-2 600 g 1 pc(s)

Type KLT ... 160 17Part No. 766 614Dimensions ØColour Black1PU


767 574 KLT 104 9

767 574 4013364125971 5-1-7 500 g 1 pc(s)

Type KLT ... 104 9Part No. 767 574Dimensions ØColour Black1PU




Stor

age

Bags

and

Tra

nspo

rt C

ases

766 704 STT 120 30 15

766 704 4013364069749 5-1-8 720 g 1 pc(s)

Type STT ... 120 30 15Part No. 766 704DimensionsColour Olive1PU


766 039 STT 180 20

766 039 4013364105362 5-1-7 711.8 g 1 pc(s)

Type STT ... 180 20Part No. 766 039Dimensions ØColour Olive1PU


769 509 STT 110 15

769 509 4013364068230 5-1-8 358.3 g 1 pc(s)

Type STT ... 110 15Part No. 769 509Dimensions ØColour Olive1DB drawing No.PU


785 111 STT 55 27 30

785 111 4013364070257 5-1-8 612 g 1 pc(s)

Type STT ... 55 27 30Part No. 785 111DimensionsColour Olive1DB drawing No.PU

With two separate interal pockets and carrier handle.

785 442 AT 50 30

785 442 4013364152847 5-8-0 280 g 1 pc(s)

Type AT 50 30Part No. 785 442Dimensions ØColour Red1 / Black1PU

®

With side handle, carrying strap and string.

785 443 ARS 65 40

785 443 4013364152854 5-8-0 520 g 1 pc(s)

Type ARS 65 40Part No. 785 443DimensionsColour Red1 / Black1PU

Storage Rucksack for complete DEHNcare® Protective EquipmentWith carrying straps and side net pocket with string.



Stor

age

Bags

and

Tra

nspo

rt C

ases

Note: All storage bags and transport cases are delivered without content.

Storage Bags and Transport

CasesSafety Equipment

Sheet Metal Case Plastic Case

767

701

766

703

766

603

759

003

745

900

766

300

766

298

767

997

767

999

766

036

766

997

766

999

766

998

759

999

759

998

767

107

745

953

745

952

745

902

745

106

767

996

766

602

766

996

767

574

767

500

766

614

766

543

766

601

766

704

766

039

769

509

785

111

785

442

785

443

PHE IIIup to lG 1675 mm

PHE III ZK Indicator with Test ProdPHE III VoltageDetector Kit

* up to 1270 mm*

PHEup to lG 1460 mm

PHEfrom lG 1565 mm

for Part No. 766 616

ASP* for Part No. 767 573 *

HSA

* for Part No. 767 656,767 652

*Voltage Detectors for LV Installations

PHV

PHV I

DEHNcap

Earthing and Short- Circuiting Device

EaS Kit for LV Installations

EaS Kit Street LightingInsulating Stick

Insulating Stick Kit

Earthing Stick

DEHNcare®

DEHNcare®

for complete protective equipment

Easy Choice

DEHN protects.


Accessories

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

With M8 thread, to be screwed onto the test prods of PHE III, PHE voltage detectors and PHV phase comparators.

Electrodes

766 913 EL M8 SZ PHE PHV

766 913 4013364051836 5-1-8 42.3 g 1 pc(s)

Type EL M8 ... SZ PHE PHVPart No. 766 913Nominal voltage (UN)Material Brass/gal CuSnPU

Onion-shaped ElectrodeFor contacting varnished busbars.

766 925 EL M8 S PHE PHV

766 925 4013364091672 5-1-8 10 g 1 pc(s)

Type EL M8 ... S PHE PHVPart No. 766 925Nominal voltage (UN)Material Stainless steelPU

Pin-shaped ElectrodeFor contacting varnished busbars.

766 927 EL M8 V PHE PHV

766 927 4013364097452 5-1-8 15 g 1 pc(s)

Type EL M8 ... V PHE PHVPart No. 766 927Nominal voltage (UN)Material Cu/gal SnPU

V-shaped ElectrodeFor contacting round conductors.

766 923 EL M8 H PHE

766 923 4013364074590 5-1-8 83.5 g 1 pc(s)

Type EL M8 ... H PHEPart No. 766 923ApplicationMaterial Steel/gal ZnPU

Hook-shaped ElectrodeFor contacting overhead line conductors.

766 924 EL M8 G PHE

766 924 4013364094840 5-1-8 46 g 1 pc(s)

Type EL M8 ... G PHEPart No. 766 924ApplicationMaterial Stainless steelPU

Fork-shaped ElectrodeFor contacting overhead line conductors.

766 915 EL M8 MAG PHE PHV

766 915 4013364088207 5-1-8 220 g 1 pc(s)

Type EL M8 ... MAG PHE PHVPart No. 766 915Nominal voltage (UN)Material Brass/gal CuSn, PVCPU


Accessories

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

Other types are available on request.

767 768 S63 PS PHE 8CK

767 768 4013364113190 5-1-8 445 g 1 pc(s)

Type S63 PS PHE 8CKPart No. 767 768Total length (l )PU

For Siemens 8CK Switchgear InstallationsCategory “S“

767 767 S65 M PS PHE 905

767 767 4013364090378 5-1-8 440 g 1 pc(s)

Type S65 M PS PHE 905Part No. 767 767Total length (l )PU

For Mipak Switchgear InstallationsCategory “S“

With M8 thread, to be screwed on the test prods of PHE III and PHE voltage detectors.

Test Probes

766 916 PSO M8 PHE

766 916 4013364106840 5-1-8 125 g 1 pc(s)

Type PSO M8 ... PHEPart No. 766 916Nominal voltage (UN)Total length (l )PU

Straight Test ProbeFor switchgear installations with limited access (e.g. Calor Emag/Isopond and Krone/KES).• Not for use in wet weather conditions

766 960 PSO M8 PHE L800

766 960 4013364109629 5-1-1 310 g 1 pc(s)

Type PSO M8 ... PHE L800Part No. 766 960Nominal voltage (UN)Total length (l )PU

Straight Test Probe, 800 mmFor transformer stations and switchgear installations that require a greater insertion depth.• Also for use in wet weather conditions

766 940 PSO M8 W25 PHE

766 940 4013364080485 5-1-8 145 g 1 pc(s)

Type PSO M8 ... W25 PHEPart No. 766 940Nominal voltage (UN)Total length (l )PU

25° angled Test ProbeFor switchgear installations with limited access. • Not for use in wet weather conditions

Test Prods


Accessories

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

766 941 PSO M8 W45 PHE

766 941 4013364080478 5-1-8 150 g 1 pc(s)


45° angled Test ProbeFor switchgear installations with limited access. • Not for use in wet weather conditions

766 950 PSO M8 W90 PHE

766 950 4013364090668 5-1-1 339 g 1 pc(s)


90° angled Test ProbeFor switchgear installations with limited access and remotely situated contacts.• Not for use in wet weather conditions

Test probes for other special switchgear installations are available on request.

Adapters and End Fittings

766 313 AD HV STK SQ

766 313 4013364115040 5-1-8 413 g 1 pc(s)

Type AD HV STK SQPart No. 766 313Total length (l )PU

Adapter (Plug-In Coupling / T Pin Shaft)

766 888 A STK

766 888 4013364125209 5-1-8 63 g 1 pc(s)

Type A STKPart No. 766 888

Total length (l )PU

STK End FittingFor use as termination and protection.

766 889 AR STK

766 889 4013364125193 5-1-8 172 g 1 pc(s)

Type AR STKPart No. 766 889

Total length (l )PU

STK End Fitting with EyeFor use as protection and transport eye when working on overhead lines.


Accessories

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

• For earthing and short-circuiting devices and sticks• Material: Steel, painted grey • Wall-mounted

Storage Devices

700 006 HV P ST D24700 007 HV P ST D30700 008 HV P ST D40 45

700 006 4013364004177 5-3-4 780 g 1 pc(s)700 007 4013364004184 5-3-4 780 g 1 pc(s)700 008 4013364004191 5-3-4 802.6 g 1 pc(s)

Type HV ... P ST D24 P ST D30 P ST D40 45Part No. 700 006 700 007 700 008For stick diameters

— —PU

For a Voltage Detector and an Earthing StickFor a voltage detector and an earthing stick of any length. Hole spacing: 290/390 mm, holes: Ø7 mm.

700 000 HV EKV ES30700 002 HV EKV ES40

700 000 4013364004122 5-3-4 1.16 kg 1 pc(s)700 002 4013364004139 5-3-4 1.15 kg 1 pc(s)

Type HV ... EKV ES30 EKV ES40Part No. 700 000 700 002For stick diameters

—PU

For an Earthing and Short-Circuiting Device and an Earthing StickFor an earthing and short-circuiting device and an earthing stick of any length.Hole spacing: 424 mm, holes: Ø7 mm.

700 003 HV EKV ES30 1500

700 003 4013364004146 5-3-4 700 g 1 pc(s)

Type HV ... EKV ES30 1500Part No. 700 003For stick diameters

PU

For an Earthing and Short-Circuiting Device and an Earthing Stick up to 1.5 mFor an earthing and short-circuiting device and an earthing stick with a length up to 1.5 m.Hole spacing: 104 mm, holes: Ø7 mm.

700 005 HV 3HH ET700 004 HV 3HH SZ ET

700 005 4013364004160 5-3-4 706.9 g 1 pc(s)700 004 4013364004153 5-3-4 1 kg 1 pc(s)

Type HV ... 3HH ET 3HH SZ ETPart No. 700 005 700 004ForPU

Note: Two storage devices are required!

For HH Fuses and a Fuse Tong – Single PartsWall-mounted, holes Ø7 mm.

700 015 HV 3HH700 014 HV 3HH SZ

700 015 4013364007192 5-3-4 1.41 kg 1 pc(s)700 014 4013364007208 5-3-4 1.71 kg 1 pc(s)

Type HV ... 3HH 3HH SZPart No. 700 015 700 014ForPU

For HH Fuses and a Fuse Tong – KitWall-mounted, holes Ø7 mm.

Kit includes:Kit Type Kit Part No. consisting of: Pos. No.HV 3HH 700 015 700 005 1

HV 3HH SZ 700 014 700 005700 004

12

1 2

1 2


Accessories

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

Installation Devices561 925 SKS M12X25 V2A561 930 SKS M12X30 V2A561 935 SKS M12X35 V2A561 931 SKS M16X30 V2A

561 925 4013364056244 1-6-1 34.7 g 1 pc(s)561 930 4013364053298 1-6-1 39 g 1 pc(s)561 935 4013364056053 1-6-1 42.4 g 1 pc(s)561 931 4013364053311 1-6-1 77.1 g 1 pc(s)

Type SKS M12X25 V2A SKS M12X30 V2A SKS M12X35 V2A SKS M16X30 V2APart No. 561 925 561 930 561 935 561 931

PU

524 912 FR A12 V2A524 913 FR A16 V2A

524 912 4013364039360 1-6-1 3.5 g 1 pc(s)524 913 4013364053250 1-6-1 8.4 g 1 pc(s)

Type FR A12 V2A FR A16 V2APart No. 524 912 524 913

PU

Spring Washers

525 912 SCH A13 V2A525 916 SCH A17 V2A

525 912 4013364053267 1-6-1 5.4 g 1 pc(s)525 916 4013364053274 1-6-1 9.8 g 1 pc(s)

Type SCH A13 V2A SCH A17 V2APart No. 525 912 525 916

PU

Washers

525 001 DP 40 40 B13 AL525 002 DP 50 50 B17 AL

525 001 4013364004986 5-3-1 18.9 g 10 pc(s)525 002 4013364004993 5-3-1 36.9 g 10 pc(s)

Type DP 40 40 B13 AL DP 50 50 B17 ALPart No. 525 001 525 002

PU

Square spring-loaded Pressure Plate

Pressure plates must be installed on both ends of the busbar.


Spare Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

766 038 AH ISMTC

766 038 4013364105355 5-2-1 275 g 1 pc(s)Type AH ISMTCPart No. 766 038Suitable forPU

Support

766 105 KS SG BLS 8

766 105 4013364125988 5-1-8 10 g 1 pc(s)Type KS SG BLS 8Part No. 766 105Suitable forTotal length (l )PU

Plastic Star Grip Screw

767 779 DR PS PHE3767 778 DR PHV

767 779 4013364093942 5-1-8 2.7 g 1 pc(s)767 778 4013364094239 5-1-8 2.9 g 1 pc(s)

Type DR PS PHE3 DR PHVPart No. 767 779 767 778Suitable forPU

Sealing Ring

767 777 FSG PHG2 PHV

767 777 4013364096493 5-1-8 46 g 1 pc(s)Type FSG PHG2 PHVPart No. 767 777Suitable forPU

Protective Rubber for PHG II and PHV

767 776 FSG PHE

767 776 4013364096486 5-1-8 58.3 g 1 pc(s)Type FSG PHEPart No. 767 776Suitable forPU

Protective Rubber for PHE

767 712 EB 9V LI767 713 EB 9V AL

767 712 4013364074699 5-1-8 37 g 1 pc(s)767 713 4013364094925 5-1-8 44.3 g 1 pc(s)

Type EB 9V LI EB 9V ALPart No. 767 712 767 713

PU

Block Battery

766 611 MZ 1.5V L91 FR6 LI 4766 618 MZ 1.5 IEC LR6 AL

766 611 4013364146549 5-1-8 94 g 1 Sa766 618 4013364148277 5-1-8 24.5 g 1 pc(s)

Type MZ 1.5V L91 FR6 LI 4 MZ 1.5 IEC LR6 ALPart No. 766 611 766 618

PUPU

Mignon Battery

766 605 GL 3.5V 0.2A E10

766 605 4013364054370 5-1-8 2.1 g 1 pc(s) Type GL 3.5V 0.2A E10Part No. 766 605

Suitable forPU

Electric Bulb


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

Test Prods767 760 S60 PS PHE 285767 761 S61 PS PHE 435767 762 S62 PS PHE 620767 763 S63 PS PHE 780767 764 S64 PS PHE 880

767 760 4013364072947 5-1-8 177 g 1 pc(s)767 761 4013364072954 5-1-8 282 g 1 pc(s)767 762 4013364072961 5-1-8 352.9 g 1 pc(s)767 763 4013364072978 5-1-8 528.8 g 1 pc(s)767 764 4013364072114 5-1-8 506 g 1 pc(s)

Type S60 PS PHE 285 S61 PS PHE 435 S62 PS PHE 620Part No. 767 760 767 761 767 762Total length (I )Insertion depth (IO)PU

For PHE III up to 30 kV / Category “S“Category “S“

767 771 S66 PS PHE 880

767 771 4013364115118 5-1-8 600 g 1 pc(s)

Type S66 PS PHE 880Part No. 767 771Total length (I )Insertion depth (IO)PU

For PHE III above 30 kV / Category “S“Category “S“

767 766 L71 PS PHE 185

767 766 4013364091696 5-1-8 129 g 1 pc(s)

Type L71 PS PHE 185Part No. 767 766Total length (I )Insertion depth (IO)PU

For PHE III up to 30 kV / Category “L“

767 772 L72 PS PHE 405

767 772 4013364115101 5-1-8 280 g 1 pc(s)

Type L72 PS PHE 405Part No. 767 772Total length (I )Insertion depth (IO)PU

For PHE III above 30 kV / Category “L“

766 619 PS PHE 15 16.7

766 619 4013364120488 5-1-8 600 g 1 pc(s)

Type PS PHE 15 16.7Part No. 766 619Total length (I )PU

For PHE 15 kV / 16.7 Hz

Indicators / Indicators with Test Prod

766 677 PHE A 15 16.7

766 677 4013364120495 5-1-2 1.4 kg 1 pc(s)

Type PHE A 15 16.7Part No. 766 677Nominal voltage (UN)Total length (l )

PU

PHE (Voltage Detector for Overhead Lines)

Other versions are available on request.

Type S63 PS PHE 780 S64 PS PHE 880Part No. 767 763 767 764Total length (I )Insertion depth (IO)PU


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

767 972 PHE3 A 30 60 S767 974 PHE3 A 30 60 L767 734 PHE3 A 60 110 S767 726 PHE3 A 60 110 L767 963 PHE3 A 60 110 S IT767 732 PHE3 A 60 132 SL767 129 PHE3 A 110 132 S

767 972 4013364143807 5-1-1 574.52 g 1 pc(s)767 974 4013364143722 5-1-1 574.52 g 1 pc(s)767 734 4013364115149 5-1-1 420 g 1 pc(s)767 726 4013364136007 5-1-1 235 g 1 pc(s)767 963 4013364136106 5-1-1 400 g 1 pc(s)767 732 4013364115156 5-1-1 589.32 g 1 pc(s)767 129 4013364139435 5-1-1 400 g 1 pc(s)

Type PHE3 A 30 60 S PHE3 A 30 60 L PHE3 A 60 110 S PHE3 A 60 110 LPart No. 767 972 767 974 767 734 767 726Nominal voltage (UN)CategoryPU

General technical data:Total length (l )

PHE III, with M12 threaded Pin

767 722 PHE3 A 20 SL ZK

767 722 4013364113183 5-1-1 474.3 g 1 pc(s) Type PHE3 A 20 SL ZKPart No. 767 722Nominal voltage (UN)CategoryTotal length (l )PU

Indicator with Gear Coupling

767 965 PHE3 A 10 30 S ZK30767 735 PHE3 A 60 132 SL ZK

767 965 4013364136120 5-1-1 474.3 g 1 pc(s)767 735 4013364115163 5-1-1 589.32 g 1 pc(s)

Type PHE3 A 10 30 S ZK30 PHE3 A 60 132 SL ZKPart No. 767 965 767 735Nominal voltage (UN)CategoryTotal length (l )PU

PHE III, with Gear Coupling

767 564 ASP A 110 132 16.7 L767 591 ASP A 110 420 L ZK767 592 ASP A 110 420 S ZK767 593 ASP A 110 420 SL ZK


Type ASP A 110 132 16.7 L

ASP A 110 420 L ZK

ASP A 110 420 S ZK

ASP A 110 420 SL ZK

Part No. 767 564 767 591 767 592 767 593Nominal voltage (UN)CategoryTotal length (l )PU

ASP, with Gear Coupling

766 678 PHE PK 15 16.7

766 678 4013364126107 5-1-2 1.6 kg 1 pc(s)

Type PHE PK 15 16.7Part No. 766 678Nominal voltage (UN)Total length (l )

PU

PHE Indicator (Voltage Detector for Overhead Lines)

Type PHE3 A 60 110 S IT PHE3 A 60 132 SL PHE3 A 110 132 SPart No. 767 963 767 732 767 129Nominal voltage (UN)CategoryPU


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

• For use in wet weather conditions

Field Sensor

767 576 EFS L 127

767 576 4013364124998 5-1-9 214 g 1 pc(s)

Type EFS ... L 127Part No. 767 576CategoryTotal length (l )PU

Category L

767 577 EFS S 167

767 577 4013364125001 5-1-9 380 g 1 pc(s)

Type EFS ... S 167Part No. 767 577CategoryTotal length (l )PU

Category S

Operating Heads766 164 SSK 36 STK 560

766 164 4013364121751 5-2-1 400 g 1 pc(s)

Type SSK 36 STK 560Part No. 766 164

Total length (l )PU

STK Switching Stick Head

766 365 AK 36 SQ STK 360

766 365 4013364121768 5-2-1 200 g 1 pc(s)

Type AK 36 SQ STK 360Part No. 766 365

Total length (l )PU

STK Operating Head / T Pin ShaftPlastic plug-in coupling (bayonet locking mechanism) for indoor use.

766 074 ES SQL STK 43 1045

766 074 4013364120952 5-4-2 1.2 kg 1 pc(s)

Type ES SQL STK 43 1045Part No. 766 074

Total length (l )

PU

SQL Operating Head

766 465 AK SQL STK 365

766 465 4013364121775 5-2-1 800 g 1 pc(s)

Type AK SQL STK 365Part No. 766 465

Total length (l )PU

STK Operating Head / long T Pin ShaftAluminium cone coupling with adjusting ring (bayonet locking mechanism) for earthing and short-cir-cuiting in outdoor installations.


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

769 516 ES SQL ALSTK 1035

769 516 4013364157378 5-5-2 1.22 kg 1 pc(s)

Type ES SQL ALSTK 1035Part No. 769 516

Total length (l )PU

SQL Operating Head with Aluminium Plug-In Coupling

766 049 AK AH ZK ISMTC

766 049 4013364108059 5-2-1 165 g 1 pc(s)

Type AK AH ZK ISMTCPart No. 766 049Total length (l )PU

Contacting AidFor telescopic insulating sticks.

766 056 RK 230 100 AS25

766 056 4013364125070 5-2-1 204 g 1 pc(s)

Type RK 230 100 AS25Part No. 766 056

PU

Cleaning Head

766 057 RP 250 115 20

766 057 4013364125087 5-2-1 75 g 1 Sa Type RP 250 115 20Part No. 766 057

PU

Accessories for Operating Heads

Rectangular Cleaning Pad

Insulating Sticks

766 331 IS M12 STK 640766 328 IS M12 AK 635

766 331 4013364115002 5-2-1 375 g 1 pc(s)766 328 4013364135765 5-2-1 840 g 1 pc(s)

Type IS M12 STK 640 IS M12 AK 635Part No. 766 331 766 328

Total length (l )PU

Insulating Stick with M12 Threaded Bushing

End cap (Part No. 766 328).

766 369 IS ZK STK HS 670

766 369 4013364125025 5-2-1 388 g 1 pc(s)

Type IS ZK STK HS 670Part No. 766 369

Total length (l )PU

For ASP, with universal Gear Coupling


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

766 368 IS ZK STK 670

766 368 4013364115026 5-2-1 340 g 1 pc(s)

Type IS ZK STK 670Part No. 766 368Nominal voltage (UN)Total length (l )PU

For PHE III, with universal Gear Coupling

766 037 ISMTC N 36 ZK 10600

766 037 4013364125940 5-2-1 6.56 kg 1 pc(s)

Type ISMTC N 36 ZK 10600Part No. 766 037Nominal voltage (UN)Total length (l / I )PU

For PHE III Indicator with Test Prod, with universal Gear CouplingWith scale for measuring the ground clearance, mounted support included.

766 363 IS 36 STK 30 1280766 463 IS 36 STK 43 1280

766 363 4013364121737 5-2-1 600 g 1 pc(s)766 463 4013364121744 5-2-1 1 kg 1 pc(s)

Type IS 36 STK 30 1280 IS 36 STK 43 1280Part No. 766 363 766 463

Total length (l )PU

For IS STK, with plug-in Coupling

766 367 ISN 36 STK 30 1280766 468 ISN 36 STK 43 1280

766 367 4013364137042 5-2-1 600 g 1 pc(s)766 468 4013364137059 5-2-1 2.45 kg 1 pc(s)

Type ISN 36 STK 30 1280 ISN 36 STK 43 1280Part No. 766 367 766 468

Total length (l )PU

ISN 36 STK Insulating Stick with Silicon Rubber Insulator

766 072 IS M12 STK 30 720766 075 IS M12 STK 30 1060

766 072 4013364126114 5-2-1 400 g 1 pc(s)766 075 4013364120471 5-2-1 520 g 1 pc(s)

Type IS M12 STK 30 720 IS M12 STK 30 1060Part No. 766 072 766 075

Total length (l )

PU

For PHE (Voltage Detectors for Overhead Lines)

766 048 IS 25 ZK 2885

766 048 4013364120433 5-2-1 2.6 kg 1 pc(s)

Type IS 25 ZK 2885Part No. 766 048

Total length (l )PU

For IS for cleaning Windscreens


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

Insulating Elements766 114 IT M12 STK 30 700766 115 IT M12 STK 30 1150

766 114 4013364143739 5-2-1 400 g 1 pc(s)766 115 4013364136038 5-2-1 725 g 1 pc(s)

Type IT M12 STK 30 700 IT M12 STK 30 1150Part No. 766 114 766 115Nominal voltage (UN)

Total length (l )PU

Insulating Element with M12 threaded Bushing

766 128 IT STK 43 1280

766 128 4013364136045 5-2-1 1.3 kg 1 pc(s)

Type IT STK 43 1280Part No. 766 128Nominal voltage (UN)

Total length (l )PU

Insulating Element with plug-in Coupling

766 358 IT ZK30 STK 30 360

766 358 4013364136137 5-1-8 200 g 1 pc(s)

Type IT ZK30 STK 30 360Part No. 766 358

Total length (l )PU

Insulating Element with Gear CouplingWith plug-in coupling.Angle of the gear coupling: – 30° / 0° / + 30°.

Adapter766 352 AD M12 STK 30 350

766 352 4013364136069 5-1-8 250 g 1 pc(s)

Type AD M12 STK 30 350Part No. 766 352

Total length (l )PU

Adapter with M12 threaded BushingWith plug-in coupling.

766 359 AD ZK STK 30 360

766 359 4013364134379 5-1-8 200 g 1 pc(s)

Type AD ZK STK 30 360Part No. 766 359

Total length (l )PU

Adapter with Gear Coupling

766 055 AD ZK 25 200

766 055 4013364125063 5-2-1 120 g 1 pc(s)

Type AD ZK 25 200Part No. 766 055

PU

Adapter with cone-shaped SupportWith gear coupling and cone-shaped support, accommodates cleaning sponges (Part No. 766 056).


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

Handle / Extensions766 120 H STK 43 800

766 120 4013364136052 5-2-1 690 g 1 pc(s)

Type H STK 43 800Part No. 766 120

Total length (l )PU

Handle

766 356 ISV 36 STK 30 910766 366 ISV 36 STK 30 1280

766 356 4013364121799 5-2-1 400 g 1 pc(s)766 366 4013364121782 5-2-1 600 g 1 pc(s)

Type ISV 36 STK 30 910 ISV 36 STK 30 1280Part No. 766 356 766 366

Total length (l )PU

766 335 HV STK 30 710766 456 HV STK 43 910766 466 HV STK 43 1280

766 335 4013364115033 5-2-1 400 g 1 pc(s)766 456 4013364121812 5-2-1 800 g 1 pc(s)766 466 4013364121805 5-2-1 1 kg 1 pc(s)

Type HV STK 30 710 HV STK 43 910 HV STK 43 1280Part No. 766 335 766 456 766 466

Total length (l )PU

766 079 HV STK RW 43 975766 078 HV STK RW 43 1045

766 079 4013364120976 5-2-1 1 kg 1 pc(s)766 078 4013364120969 5-2-1 1 kg 1 pc(s)

Type HV STK RW 43 975 HV STK RW 43 1045Part No. 766 079 766 078

Total length (l )

PU

766 077 HV STK 43 975766 076 HV STK 43 1045766 073 HV STK 43 2350

766 077 4013364120457 5-2-1 740 g 1 pc(s)766 076 4013364120464 5-2-1 800 g 1 pc(s)766 073 4013364126121 5-2-1 1.6 kg 1 pc(s)

Type HV STK 43 975 HV STK 43 1045 HV STK 43 2350Part No. 766 077 766 076 766 073

Total length (l )

PU


Kit Parts

Acc

esso

ries

, Spa

re P

arts

, Kit

Par

ts

769 517 HV ALSTK 1035

769 517 4013364157385 5-5-2 1.15 kg 1 pc(s)

Type HV ALSTK 1035Part No. 769 517 +

Total length (l )PU

769 519 HV ALSTK AK RW 1035

769 519 4013364157408 5-5-2 1.15 kg 1 pc(s)

Type HV ALSTK AK RW 1035Part No. 769 519 +

Total length (I )PU

769 518 HV ALSTK RW 1035

769 518 4013364157392 5-5-2 1.29 kg 1 pc(s)

Type HV ALSTK RW 1035Part No. 769 518 +

Total length (l )PU


Inde

x

Part No. / GTIN* / PG / Weight / PU / VE / Page

336 020 003941 5-3-1 118 g 1 pc(s) 35336 025 003958 5-3-1 252 g 1 pc(s) 35 524 912 039360 1-6-1 4 g 1 pc(s) 127524 913 053250 1-6-1 8 g 1 pc(s) 127 525 001 004986 5-3-1 19 g 10 pc(s) 127525 002 004993 5-3-1 37 g 10 pc(s) 127525 912 053267 1-6-1 5 g 1 pc(s) 127525 916 053274 1-6-1 10 g 1 pc(s) 127 561 925 056244 1-6-1 35 g 1 pc(s) 127561 930 053298 1-6-1 39 g 1 pc(s) 127561 931 053311 1-6-1 77 g 1 pc(s) 127561 935 056053 1-6-1 42 g 1 pc(s) 127 644 000 030268 3-7-1 4.45 kg 1 pc(s) 46 700 000 004122 5-3-4 1.16 kg 1 pc(s) 126700 002 004139 5-3-4 1.15 kg 1 pc(s) 126700 003 004146 5-3-4 700 g 1 pc(s) 126700 004 004153 5-3-4 1 kg 1 pc(s) 126700 005 004160 5-3-4 707 g 1 pc(s) 126700 006 004177 5-3-4 780 g 1 pc(s) 126700 007 004184 5-3-4 780 g 1 pc(s) 126700 008 004191 5-3-4 803 g 1 pc(s) 126700 014 007208 5-3-4 1.71 kg 1 pc(s) 126700 015 007192 5-3-4 1.41 kg 1 pc(s) 126700 098 157422 5-1-8 180 g 1 Set 113700 099 157415 5-1-8 1.28 kg 1 m 113 705 500 000025 5-3-1 122 g 1 pc(s) 35705 501 003927 5-3-1 152 g 1 pc(s) 35705 504 008021 5-3-1 183 g 1 pc(s) 35705 510 089587 5-3-1 240 g 1 pc(s) 35 706 200 004276 5-3-1 172 g 1 pc(s) 34706 235 004290 5-3-1 219 g 1 pc(s) 34706 300 003675 5-3-1 129 g 1 pc(s) 33706 600 004283 5-3-1 158 g 1 pc(s) 34706 645 004306 5-3-1 274 g 1 pc(s) 34 707 200 004368 5-3-1 204 g 1 pc(s) 34707 235 004382 5-3-1 259 g 1 pc(s) 34707 600 004375 5-3-1 191 g 1 pc(s) 34707 645 004399 5-3-1 299 g 1 pc(s) 34 712 001 011823 5-3-0 1.23 kg 1 m 41 715 001 011830 5-3-0 1.52 kg 1 m 41715 312 150386 5-4-1 1.5 kg 1 pc(s) 42 716 001 010406 5-3-0 184 g 1 m 41 720 010 077935 5-3-1 314 g 1 pc(s) 34720 012 077942 5-3-1 347 g 1 pc(s) 34720 014 077959 5-3-1 329 g 1 pc(s) 34720 016 003729 5-3-1 309 g 1 pc(s) 34720 018 077973 5-3-1 296 g 1 pc(s) 34720 020 077980 5-3-1 276 g 1 pc(s) 34 723 199 151703 5-7-4 750 g 1 pc(s) 112 725 001 011793 5-3-0 207 g 1 m 41725 010 003750 5-3-1 410 g 1 pc(s) 34725 012 003767 5-3-1 400 g 1 pc(s) 34

725 014 003774 5-3-1 385 g 1 pc(s) 34725 016 003781 5-3-1 365 g 1 pc(s) 34725 018 078048 5-3-1 345 g 1 pc(s) 34725 020 003804 5-3-1 320 g 1 pc(s) 34 728 312 128712 5-3-1 270 g 1 pc(s) 45728 313 157132 5-3-1 612 g 1 pc(s) 45728 501 079618 5-5-2 900 g 1 pc(s) 36728 502 079571 5-5-2 708 g 1 pc(s) 37728 503 079564 5-5-2 453 g 1 pc(s) 37728 506 147904 5-3-1 867 g 1 pc(s) 36728 516 147898 5-3-1 1.44 kg 1 pc(s) 36728 522 147874 5-3-1 676 g 1 pc(s) 36728 526 147881 5-3-1 934 g 1 pc(s) 36728 620 147843 5-3-1 985 g 1 pc(s) 36728 625 147867 5-3-1 984 g 1 pc(s) 36 731 011 004771 5-4-3 690 g 1 pc(s) 37731 013 004795 5-4-3 850 g 1 pc(s) 37731 015 004801 5-4-3 1 kg 1 pc(s) 37731 027 004818 5-4-3 1.97 kg 1 pc(s) 37731 037 005044 5-4-3 2.66 kg 1 pc(s) 37 735 001 011847 5-3-0 366 g 1 m 41 740 124 051072 5-5-2 255 g 1 pc(s) 62 745 016 052000 5-6-1 467 g 1 pc(s) 68745 017 052017 5-6-1 277 g 1 pc(s) 68745 018 052048 5-6-1 271 g 1 pc(s) 68745 105 104457 5-6-3 1.83 kg 1 pc(s) 71745 106 104495 5-6-2 890 g 1 pc(s) 71745 107 104501 5-6-0 286 g 1 pc(s) 71745 108 104518 5-6-2 20 g 1 pc(s) 71745 109 104525 5-6-2 18 g 1 pc(s) 71745 201 008007 5-6-1 65 g 1 pc(s) 68745 202 007871 5-6-1 90 g 1 pc(s) 68745 203 008014 5-6-1 102 g 1 pc(s) 69745 204 018655 5-6-1 145 g 1 pc(s) 69745 302 052024 5-6-1 110 g 1 pc(s) 68745 400 006959 5-6-2 250 g 1 pc(s) 69745 414 116085 5-4-2 285 g 1 pc(s) 72745 415 116092 5-4-2 275 g 1 pc(s) 72745 500 007888 5-6-3 7.57 kg 1 pc(s) 66745 502 072213 5-6-1 360 g 1 pc(s) 69745 503 133570 5-6-1 154 g 1 pc(s) 65745 508 149366 5-6-1 137 g 1 pc(s) 69745 602 072220 5-6-1 580 g 1 pc(s) 69745 900 082731 5-6-2 3.71 kg 1 pc(s) 117745 901 083530 5-6-3 6.89 kg 1 pc(s) 64745 902 093591 5-6-2 1.62 kg 1 pc(s) 118745 903 093577 5-6-3 7 kg 1 pc(s) 64745 905 082021 5-6-1 75 g 1 pc(s) 65745 910 082038 5-6-1 190 g 1 pc(s) 65745 915 082045 5-6-1 420 g 1 pc(s) 66745 921 082069 5-6-2 220 g 1 pc(s) 66745 922 082434 5-6-2 220 g 1 pc(s) 66745 952 137066 5-6-2 4.9 kg 1 pc(s) 118745 953 137073 5-6-2 4.95 kg 1 pc(s) 118 750 001 011809 5-3-0 535 g 1 m 41750 041 126688 5-5-1 4.22 kg 1 pc(s) 61750 042 126695 5-5-1 4.06 kg 1 pc(s) 61750 196 123823 5-5-0 26.58 kg 1 pc(s) 57750 200 123830 5-5-0 16.95 kg 1 pc(s) 58750 210 123793 5-5-0 13.44 kg 1 pc(s) 56

Part No. GTIN* PG Weight PU VE Page Part No. GTIN* PG Weight PU VE Page


Inde

x


750 211 123809 5-5-0 15.55 kg 1 pc(s) 57750 212 123847 5-5-1 13 kg 1 pc(s) 59750 213 123861 5-5-1 8.76 kg 1 pc(s) 59750 214 123816 5-5-0 15.6 kg 1 pc(s) 58750 215 123878 5-6-3 7.3 kg 1 pc(s) 59750 216 157255 5-5-0 26.58 kg 1 pc(s) 57750 217 157262 5-5-0 17.08 kg 1 pc(s) 58750 218 157224 5-5-0 14.73 kg 1 pc(s) 56750 219 157231 5-5-0 16.87 kg 1 pc(s) 57750 221 157248 5-5-0 15.51 kg 1 pc(s) 58750 500 000032 5-3-1 250 g 1 pc(s) 35 751 040 006041 5-5-2 2.6 kg 1 pc(s) 62751 085 006058 5-5-2 4.98 kg 1 pc(s) 62751 086 126626 5-5-0 9 kg 1 pc(s) 60751 087 126633 5-5-0 9.13 kg 1 pc(s) 60751 120 006065 5-5-2 6.86 kg 1 pc(s) 62751 121 126640 5-5-0 11.14 kg 1 pc(s) 60751 122 126657 5-5-0 11.41 kg 1 pc(s) 60751 126 126664 5-5-0 10.88 kg 1 pc(s) 60751 127 126671 5-5-0 11.01 kg 1 pc(s) 60751 130 041776 5-5-2 7.39 kg 1 pc(s) 62751 140 018570 5-5-2 7.93 kg 1 pc(s) 62751 150 084520 5-3-0 4.53 kg 1 pc(s) 61751 191 126602 5-5-1 8.82 kg 1 pc(s) 61751 192 123885 5-5-1 6.68 kg 1 pc(s) 62751 193 123892 5-5-1 10.28 kg 1 pc(s) 61751 196 157767 5-5-1 8.53 kg 1 pc(s) 62751 197 157774 5-5-1 14.41 kg 1 pc(s) 62 752 040 230187 5-5-0 10 kg 1 pc(s) 62752 041 230569 5-5-0 — 1 pc(s) 61752 042 230576 5-5-0 — 1 pc(s) 61752 085 230637 5-5-0 — 1 pc(s) 62752 086 230217 5-5-0 7.02 kg 1 pc(s) 60752 087 230422 5-5-0 7.21 kg 1 pc(s) 60752 120 230644 5-5-0 — 1 pc(s) 62752 121 230316 5-5-0 8.32 kg 1 pc(s) 60752 122 230453 5-5-0 8.48 kg 1 pc(s) 60752 126 230262 5-5-0 8.05 kg 1 pc(s) 60752 127 230439 5-5-0 8.21 kg 1 pc(s) 60752 130 245594 5-5-2 — 1 pc(s) 62752 140 245617 5-5-2 — 1 pc(s) 62752 191 230330 5-5-0 6.34 kg 1 pc(s) 61752 192 230590 5-5-0 — 1 pc(s) 62752 193 230538 5-5-0 7.38 kg 1 pc(s) 61752 196 230545 5-5-0 6.52 kg 1 pc(s) 62752 197 230552 5-5-0 7.55 kg 1 pc(s) 62754 200 004207 5-3-1 131 g 1 pc(s) 33754 205 097865 5-3-1 137 g 1 pc(s) 33754 235 004221 5-3-1 184 g 1 pc(s) 33754 600 004214 5-3-1 116 g 1 pc(s) 33754 645 004238 5-3-1 287 g 1 pc(s) 33 755 200 000087 5-3-1 220 g 1 pc(s) 33755 225 004498 5-3-1 265 g 1 pc(s) 33755 245 000070 5-3-1 278 g 1 pc(s) 33755 501 003934 5-3-1 298 g 1 pc(s) 35755 600 000094 5-3-1 204 g 1 pc(s) 33755 626 079625 5-5-2 301 g 1 pc(s) 33755 627 077768 5-5-2 311 g 1 pc(s) 33755 636 079670 5-5-2 310 g 1 pc(s) 33755 645 000100 5-3-1 319 g 1 pc(s) 33755 646 079632 5-5-2 330 g 1 pc(s) 33 756 200 004313 5-3-1 357 g 1 pc(s) 34

756 245 004337 5-3-1 434 g 1 pc(s) 34756 300 003682 5-3-1 212 g 1 pc(s) 33756 600 004320 5-3-1 356 g 1 pc(s) 34756 645 004344 5-3-1 470 g 1 pc(s) 34 757 200 004405 5-3-1 395 g 1 pc(s) 34757 245 004429 5-3-1 454 g 1 pc(s) 34757 600 004412 5-3-1 370 g 1 pc(s) 34757 645 004436 5-3-1 491 g 1 pc(s) 34 758 001 004030 5-7-2 2.22 kg 1 pc(s) 115758 003 004047 5-7-2 1.95 kg 1 pc(s) 115758 015 041608 5-7-2 2.62 kg 1 pc(s) 116758 020 098992 5-7-2 1.34 kg 1 pc(s) 115758 021 099005 5-7-2 1.1 kg 1 pc(s) 115758 022 099012 5-7-2 650 g 1 pc(s) 115758 025 127838 5-7-2 1.49 kg 1 pc(s) 116758 028 132450 5-7-2 4.16 kg 1 pc(s) 116758 031 229853 5-7-2 2.1 kg 1 pc(s) 116 759 003 105942 5-1-7 6.2 kg 1 pc(s) 117759 111 010376 5-1-6 200 g 1 pc(s) 27759 121 013971 5-1-6 154 g 1 pc(s) 27759 300 125964 5-1-6 1.2 kg 1 pc(s) 27759 603 097469 5-1-6 205 g 1 pc(s) 27759 604 097537 5-1-6 349 g 1 pc(s) 28759 605 097476 5-1-6 336 g 1 pc(s) 27759 606 097322 5-1-6 1.63 kg 1 pc(s) 28759 608 097544 5-1-6 295 g 1 pc(s) 28759 610 097483 5-1-6 405 g 1 pc(s) 27759 611 097551 5-1-6 346 g 1 pc(s) 28759 612 097339 5-1-6 1.8 kg 1 pc(s) 28759 615 097520 5-1-6 400 g 1 pc(s) 27759 616 097353 5-1-6 1.9 kg 1 pc(s) 28759 620 097490 5-1-6 340 g 1 pc(s) 27759 621 097513 5-1-6 370 g 1 pc(s) 28759 622 097568 5-1-6 425 g 1 pc(s) 28759 624 097346 5-1-6 1.8 kg 1 pc(s) 28759 998 115309 5-1-7 3.32 kg 1 pc(s) 118759 999 115293 5-1-7 2.38 kg 1 pc(s) 118 761 001 125179 5-3-3 400 g 1 pc(s) 50761 002 125186 5-3-3 400 g 1 pc(s) 50761 003 134348 5-3-3 840 g 1 pc(s) 50761 004 134355 5-3-3 1.99 kg 1 pc(s) 50761 010 000155 5-3-3 980 g 1 pc(s) 50761 011 000230 5-3-3 1.05 kg 1 pc(s) 50761 015 000162 5-3-3 1.35 kg 1 pc(s) 50761 016 000247 5-3-3 1.36 kg 1 pc(s) 50761 070 136212 5-3-3 800 g 1 pc(s) 50761 075 136229 5-3-3 800 g 1 pc(s) 50 763 100 125155 5-2-0 600 g 1 pc(s) 10763 111 137226 5-2-0 580 g 1 pc(s) 10763 150 125162 5-2-0 600 g 1 pc(s) 10763 180 134263 5-2-0 850 g 1 pc(s) 10763 181 137240 5-2-0 2.54 kg 1 pc(s) 11763 211 081567 5-2-3 — 1 pc(s) 73763 221 081574 5-2-3 — 1 pc(s) 73763 231 081581 5-2-3 — 1 pc(s) 73763 241 081598 5-2-3 — 1 pc(s) 73763 510 137172 5-2-0 520 g 1 pc(s) 10763 511 137189 5-2-0 660 g 1 pc(s) 10763 512 137196 5-2-0 820 g 1 pc(s) 10763 610 003286 5-2-0 962 g 1 pc(s) 10763 611 076921 5-2-0 610 g 1 pc(s) 10



Inde

x


763 612 078635 5-2-0 800 g 1 pc(s) 10763 615 003309 5-2-0 1.42 kg 1 pc(s) 10763 620 003316 5-2-0 800 g 1 pc(s) 10 765 001 051805 5-1-8 190 g 1 pc(s) 51765 005 051775 5-2-0 117 g 1 pc(s) 10765 006 156104 5-1-8 315 g 1 pc(s) 51765 009 051782 5-2-0 145 g 1 pc(s) 10765 040 093751 5-2-2 2.13 kg 1 pc(s) 11765 041 093768 5-2-2 2.28 kg 1 pc(s) 11765 042 093775 5-2-2 2.59 kg 1 pc(s) 11765 050 093782 5-2-2 2.15 kg 1 pc(s) 11765 051 093799 5-2-2 2.29 kg 1 pc(s) 11765 052 093805 5-2-2 2.59 kg 1 pc(s) 11 766 001 017825 5-2-1 416 g 1 pc(s) 8766 002 017832 5-2-1 810 g 1 pc(s) 8766 036 105584 5-1-7 968 g 1 pc(s) 117766 037 125940 5-2-1 6.56 kg 1 pc(s) 133766 038 105355 5-2-1 275 g 1 pc(s) 128766 039 105362 5-1-7 712 g 1 pc(s) 120766 040 113046 5-2-1 820 g 1 pc(s) 12766 041 113053 5-2-1 1 kg 1 pc(s) 12766 042 113060 5-2-1 1.12 kg 1 pc(s) 12766 048 120433 5-2-1 2.6 kg 1 pc(s) 133766 049 108059 5-2-1 165 g 1 pc(s) 132766 055 125063 5-2-1 120 g 1 pc(s) 134766 056 125070 5-2-1 204 g 1 pc(s) 132766 057 125087 5-2-1 75 g 1 Set 132766 072 126114 5-2-1 400 g 1 pc(s) 133766 073 126121 5-2-1 1.6 kg 1 pc(s) 135766 074 120952 5-4-2 1.2 kg 1 pc(s) 131766 075 120471 5-2-1 520 g 1 pc(s) 133766 076 120464 5-2-1 800 g 1 pc(s) 135766 077 120457 5-2-1 740 g 1 pc(s) 135766 078 120969 5-2-1 1 kg 1 pc(s) 135766 079 120976 5-2-1 1 kg 1 pc(s) 135766 100 125117 5-2-1 400 g 1 pc(s) 9766 105 125988 5-1-8 10 g 1 pc(s) 128766 111 137295 5-2-1 560 g 1 pc(s) 9766 114 143739 5-2-1 400 g 1 pc(s) 134766 115 136038 5-2-1 725 g 1 pc(s) 134766 120 136052 5-2-1 690 g 1 pc(s) 135766 122 134249 5-2-1 800 g 1 pc(s) 9766 128 136045 5-2-1 1.3 kg 1 pc(s) 134766 164 121751 5-2-1 400 g 1 pc(s) 131766 210 137257 5-2-1 480 g 1 pc(s) 8766 211 137271 5-2-1 480 g 1 pc(s) 8766 215 137264 5-2-1 640 g 1 pc(s) 8766 216 137288 5-2-1 640 g 1 pc(s) 8766 222 137301 5-2-1 2.36 kg 1 pc(s) 9766 298 007864 5-6-2 3.7 kg 1 pc(s) 117766 300 007628 5-6-2 1.2 kg 1 pc(s) 117766 301 125124 5-2-1 400 g 1 pc(s) 9766 302 051317 5-6-3 4.38 kg 1 pc(s) 66766 310 137318 5-2-1 560 g 1 pc(s) 9766 311 017856 5-2-1 419 g 1 pc(s) 8766 313 115040 5-1-8 413 g 1 pc(s) 125766 315 008281 5-2-1 820 g 1 pc(s) 8766 322 134256 5-2-1 800 g 1 pc(s) 9766 323 125865 5-2-1 5.8 kg 1 pc(s) 7766 324 137004 5-2-0 4.5 kg 1 pc(s) 7766 325 125872 5-2-1 5.6 kg 1 pc(s) 7766 326 137011 5-2-1 4.3 kg 1 pc(s) 7766 328 135765 5-2-1 840 g 1 pc(s) 132766 331 115002 5-2-1 375 g 1 pc(s) 132

766 332 137325 5-2-1 2.38 kg 1 pc(s) 9766 335 115033 5-2-1 400 g 1 pc(s) 135766 340 125056 5-2-1 3 kg 1 pc(s) 88766 352 136069 5-1-8 250 g 1 pc(s) 134766 356 121799 5-2-1 400 g 1 pc(s) 135766 358 136137 5-1-8 200 g 1 pc(s) 134766 359 134379 5-1-8 200 g 1 pc(s) 134766 363 121737 5-2-1 600 g 1 pc(s) 133766 364 128262 5-2-1 240 g 1 pc(s) 8766 365 121768 5-2-1 200 g 1 pc(s) 131766 366 121782 5-2-1 600 g 1 pc(s) 135766 367 137042 5-2-1 600 g 1 pc(s) 133766 368 115026 5-2-1 340 g 1 pc(s) 133766 369 125025 5-2-1 388 g 1 pc(s) 132766 371 139909 5-2-1 560 g 1 pc(s) 12766 372 139916 5-2-1 1.24 kg 1 pc(s) 12766 450 125889 5-4-2 7.6 kg 1 pc(s) 8766 451 137028 5-4-2 6.2 kg 1 pc(s) 8766 452 125896 5-2-1 6.6 kg 1 pc(s) 7766 453 137035 5-2-1 5.3 kg 1 pc(s) 7766 456 121812 5-2-1 800 g 1 pc(s) 135766 463 121744 5-2-1 1 kg 1 pc(s) 133766 465 121775 5-2-1 800 g 1 pc(s) 131766 466 121805 5-2-1 1 kg 1 pc(s) 135766 468 137059 5-2-1 2.45 kg 1 pc(s) 133766 469 139893 5-2-1 3.42 kg 1 pc(s) 12766 542 051706 5-1-3 71 g 1 pc(s) 26766 543 051683 5-1-7 148 g 1 pc(s) 26766 544 156111 5-1-3 415 g 1 pc(s) 26766 548 156128 5-1-3 417 g 1 pc(s) 26766 601 056596 5-1-7 319 g 1 pc(s) 119766 602 056626 5-1-7 1.31 kg 1 pc(s) 119766 603 005860 5-1-7 6 kg 1 pc(s) 117766 605 054370 5-1-8 2 g 1 pc(s) 128766 611 146549 5-1-8 94 g 1 Set 128766 614 056916 5-6-2 600 g 1 pc(s) 119766 616 126091 5-1-2 5.09 kg 1 pc(s) 22766 617 101760 5-1-2 4.95 kg 1 pc(s) 22766 618 148277 5-1-8 25 g 1 pc(s) 128766 619 120488 5-1-8 600 g 1 pc(s) 129766 677 120495 5-1-2 1.4 kg 1 pc(s) 129766 678 126107 5-1-2 1.6 kg 1 pc(s) 130766 703 080379 5-1-7 5.03 kg 1 pc(s) 117766 704 069749 5-1-8 720 g 1 pc(s) 120766 706 094307 5-1-0 800 g 1 pc(s) 24766 710 094314 5-1-0 1.7 kg 1 pc(s) 24766 720 094321 5-1-0 1.7 kg 1 pc(s) 24766 888 125209 5-1-8 63 g 1 pc(s) 125766 889 125193 5-1-8 172 g 1 pc(s) 125766 913 051836 5-1-8 42 g 1 pc(s) 123766 915 088207 5-1-8 220 g 1 pc(s) 123766 916 106840 5-1-8 125 g 1 pc(s) 124766 923 074590 5-1-8 84 g 1 pc(s) 123766 924 094840 5-1-8 46 g 1 pc(s) 123766 925 091672 5-1-8 10 g 1 pc(s) 123766 927 097452 5-1-8 15 g 1 pc(s) 123766 940 080485 5-1-8 145 g 1 pc(s) 124766 941 080478 5-1-8 150 g 1 pc(s) 125766 950 090668 5-1-1 339 g 1 pc(s) 125766 960 109629 5-1-1 310 g 1 pc(s) 124766 996 128170 5-1-7 4 kg 1 pc(s) 119766 997 115699 5-1-7 2.39 kg 1 pc(s) 118766 998 115286 5-1-7 3.36 kg 1 pc(s) 118766 999 115279 5-1-7 3.32 kg 1 pc(s) 118 767 101 069541 5-1-4 60 g 1 pc(s) 29



Inde

x


767 102 074064 5-1-4 62 g 1 pc(s) 29767 106 073487 5-1-7 375 g 1 pc(s) 118767 107 105577 5-1-7 880 g 1 pc(s) 118767 110 070905 5-1-4 119 g 1 pc(s) 29767 112 074361 5-1-4 150 g 1 pc(s) 29767 122 074385 5-1-4 185 g 1 pc(s) 30767 125 130319 5-1-1 1.26 kg 1 pc(s) 15767 129 139435 5-1-1 400 g 1 pc(s) 130767 131 139411 5-1-1 6.2 kg 1 pc(s) 20767 132 073005 5-1-4 640 g 1 pc(s) 30767 133 073494 5-1-4 85 g 1 pc(s) 31767 135 077720 5-1-4 85 g 1 pc(s) 31767 136 081109 5-1-4 65 g 1 pc(s) 31767 139 136953 5-1-4 820 g 1 pc(s) 30767 150 139473 5-1-4 1.94 kg 1 pc(s) 31767 403 094024 5-1-1 2.14 kg 1 pc(s) 21767 406 094031 5-1-1 1.3 kg 1 pc(s) 21767 410 135635 5-1-1 1.4 kg 1 pc(s) 21767 413 128750 5-1-1 1.77 kg 1 pc(s) 21767 415 081116 5-1-1 1.52 kg 1 pc(s) 22767 416 084247 5-1-2 2.62 kg 1 pc(s) 22767 418 094048 5-1-1 1.2 kg 1 pc(s) 21767 420 093980 5-1-1 2.38 kg 1 pc(s) 21767 428 094055 5-1-1 1.4 kg 1 pc(s) 21767 430 093997 5-1-1 1.5 kg 1 pc(s) 21767 433 094000 5-1-1 1.5 kg 1 pc(s) 21767 438 135628 5-1-1 1.6 kg 1 pc(s) 21767 500 105676 5-1-8 280 g 1 pc(s) 30767 542 086616 5-1-9 5.35 kg 1 pc(s) 24767 552 115736 5-1-9 2 kg 1 pc(s) 24767 564 143784 5-1-9 464 g 1 pc(s) 130767 565 143760 5-1-9 2.03 kg 1 pc(s) 23767 571 124967 5-1-9 1.99 kg 1 pc(s) 23767 572 124974 5-1-9 2.01 kg 1 pc(s) 23767 573 134270 5-1-9 3.57 kg 1 pc(s) 23767 574 125971 5-1-7 500 g 1 pc(s) 119767 576 124998 5-1-9 214 g 1 pc(s) 131767 577 125001 5-1-9 380 g 1 pc(s) 131767 591 146785 5-1-9 809 g 1 pc(s) 130767 592 146792 5-1-9 465 g 1 pc(s) 130767 593 146808 5-1-9 471 g 1 pc(s) 130767 637 155879 5-1-5 2.1 kg 1 pc(s) 26767 639 155817 5-1-5 2.4 kg 1 pc(s) 26767 645 156067 5-1-5 2.6 kg 1 pc(s) 26767 647 156081 5-1-5 2.1 kg 1 pc(s) 26767 652 157088 5-1-5 4.2 kg 1 pc(s) 25767 656 157101 5-1-5 4.2 kg 1 pc(s) 25767 666 157071 5-1-5 2.2 kg 1 pc(s) 25767 671 156807 5-1-5 2.6 kg 1 pc(s) 25767 701 071292 5-1-7 5.7 kg 1 pc(s) 117767 703 070899 5-1-1 1.01 kg 1 pc(s) 15767 706 070837 5-1-1 1.01 kg 1 pc(s) 15767 710 070851 5-1-1 1.01 kg 1 pc(s) 15767 711 070820 5-1-1 1.16 kg 1 pc(s) 15767 712 074699 5-1-8 37 g 1 pc(s) 128767 713 094925 5-1-8 44 g 1 pc(s) 128767 720 070844 5-1-1 1.07 kg 1 pc(s) 15767 721 070868 5-1-1 1.23 kg 1 pc(s) 15767 722 113183 5-1-1 474 g 1 pc(s) 130767 724 125902 5-1-1 4.22 kg 1 pc(s) 18767 725 125919 5-1-1 9.1 kg 1 pc(s) 18767 726 136007 5-1-1 235 g 1 pc(s) 130767 730 070813 5-1-1 1.13 kg 1 pc(s) 15767 731 070875 5-1-1 1.29 kg 1 pc(s) 15767 732 115156 5-1-1 590 g 1 pc(s) 130767 733 070882 5-1-1 1.29 kg 1 pc(s) 16

767 734 115149 5-1-1 420 g 1 pc(s) 130767 735 115163 5-1-1 590 g 1 pc(s) 130767 740 071063 5-1-1 1.45 kg 1 pc(s) 16767 750 071070 5-1-1 1.51 kg 1 pc(s) 16767 760 072947 5-1-8 177 g 1 pc(s) 129767 761 072954 5-1-8 282 g 1 pc(s) 129767 762 072961 5-1-8 353 g 1 pc(s) 129767 763 072978 5-1-8 529 g 1 pc(s) 129767 764 072114 5-1-8 506 g 1 pc(s) 129767 766 091696 5-1-8 129 g 1 pc(s) 129767 767 090378 5-1-8 440 g 1 pc(s) 124767 768 113190 5-1-8 445 g 1 pc(s) 124767 771 115118 5-1-8 600 g 1 pc(s) 129767 772 115101 5-1-8 280 g 1 pc(s) 129767 776 096486 5-1-8 58 g 1 pc(s) 128767 777 096493 5-1-8 46 g 1 pc(s) 128767 778 094239 5-1-8 3 g 1 pc(s) 128767 779 093942 5-1-8 3 g 1 pc(s) 128767 903 134737 5-1-1 992 g 1 pc(s) 15767 906 134744 5-1-1 992 g 1 pc(s) 15767 910 134751 5-1-1 992 g 1 pc(s) 15767 920 134768 5-1-1 1.1 kg 1 pc(s) 15767 921 097360 5-1-1 1.65 kg 1 pc(s) 17767 922 097384 5-1-1 1.07 kg 1 pc(s) 17767 930 134775 5-1-1 1.17 kg 1 pc(s) 15767 931 097377 5-1-1 1.08 kg 1 pc(s) 17767 932 097391 5-1-1 1.07 kg 1 pc(s) 17767 940 134829 5-1-1 1.38 kg 1 pc(s) 16767 941 134782 5-1-1 1.17 kg 1 pc(s) 16767 950 134836 5-1-1 1.44 kg 1 pc(s) 16767 951 134799 5-1-1 1.26 kg 1 pc(s) 16767 960 134812 5-1-1 1.32 kg 1 pc(s) 16767 961 134805 5-1-1 1.32 kg 1 pc(s) 16767 963 136106 5-1-1 400 g 1 pc(s) 130767 965 136120 5-1-1 474 g 1 pc(s) 130767 970 143746 5-1-1 5.8 kg 1 pc(s) 18767 972 143807 5-1-1 575 g 1 pc(s) 130767 974 143722 5-1-1 575 g 1 pc(s) 130767 975 143708 5-1-1 5.42 kg 1 pc(s) 19767 980 125926 5-1-1 5.98 kg 1 pc(s) 19767 981 125933 5-1-1 5.66 kg 1 pc(s) 19767 982 125841 5-1-1 7.4 kg 1 pc(s) 19767 983 125858 5-1-1 6.38 kg 1 pc(s) 20767 984 136083 5-1-1 6.2 kg 1 pc(s) 20767 996 120181 5-1-7 2.3 kg 1 pc(s) 119767 997 115682 5-1-7 2.42 kg 1 pc(s) 117767 999 115262 5-1-7 3.4 kg 1 pc(s) 117 769 300 080867 5-4-2 2.8 kg 1 pc(s) 51769 352 007345 5-5-2 4.8 kg 1 pc(s) 52769 400 080881 5-4-2 3.68 kg 1 pc(s) 51769 500 080904 5-4-2 4.68 kg 1 pc(s) 51769 502 004542 5-5-2 5.6 kg 1 pc(s) 52769 503 003996 5-4-2 1.64 kg 1 pc(s) 51769 504 004559 5-4-2 1.6 kg 1 pc(s) 52769 505 004566 5-4-2 1.46 kg 1 pc(s) 52769 506 120938 5-5-2 6.5 kg 1 pc(s) 52769 508 052383 5-5-2 4.5 kg 1 pc(s) 52769 509 068230 5-1-8 358 g 1 pc(s) 120769 515 157361 5-5-2 6.9 kg 1 pc(s) 53769 516 157378 5-5-2 1.22 kg 1 pc(s) 132769 517 157385 5-5-2 1.15 kg 1 pc(s) 136769 518 157392 5-5-2 1.29 kg 1 pc(s) 136769 519 157408 5-5-2 1.15 kg 1 pc(s) 136 770 001 011762 5-3-0 753 g 1 m 41



Inde

x


771 230 144392 5-7-1 1.05 kg 1 pc(s) 70771 231 144408 5-7-1 1.05 kg 1 pc(s) 70771 232 144415 5-7-1 1.05 kg 1 pc(s) 70771 233 144422 5-7-1 1.05 kg 1 pc(s) 70771 316 150393 5-4-1 418 g 1 pc(s) 43 772 310 057593 5-4-1 469 g 1 pc(s) 42772 311 057586 5-4-1 482 g 1 pc(s) 42772 312 054431 5-4-1 480 g 1 pc(s) 48772 313 054448 5-4-1 400 g 1 pc(s) 48772 314 080171 5-4-1 446 g 1 pc(s) 45772 320 057432 5-4-1 785 g 1 pc(s) 42772 321 057449 5-4-1 756 g 1 pc(s) 42772 322 054455 5-4-1 747 g 1 pc(s) 48772 323 054462 5-4-1 876 g 1 pc(s) 48772 324 080188 5-4-1 719 g 1 pc(s) 45772 330 069220 5-4-1 560 g 1 pc(s) 42772 331 066304 5-4-1 566 g 1 pc(s) 42772 340 057456 5-4-1 878 g 1 pc(s) 42772 341 057425 5-4-1 902 g 1 pc(s) 42 773 034 114562 5-4-1 634 g 1 pc(s) 43773 130 057722 5-4-1 801 g 1 pc(s) 43773 234 114555 5-4-1 661 g 1 pc(s) 43773 236 114579 5-4-1 714 g 1 pc(s) 45773 251 005990 5-5-2 901 g 1 pc(s) 49773 330 057760 5-4-1 830 g 1 pc(s) 43773 331 069244 5-4-1 793 g 1 pc(s) 45 774 034 114586 5-4-1 662 g 1 pc(s) 47774 130 057739 5-4-1 780 g 1 pc(s) 47774 234 114593 5-4-1 772 g 1 pc(s) 47774 251 006003 5-5-2 955 g 1 pc(s) 49774 330 057715 5-4-1 941 g 1 pc(s) 47774 434 114609 5-4-1 712 g 1 pc(s) 47774 530 057746 5-4-1 700 g 1 pc(s) 47 775 621 102545 5-4-4 311 g 1 pc(s) 48775 626 102569 5-4-4 343 g 1 pc(s) 48775 631 102552 5-4-4 290 g 1 pc(s) 48775 636 102576 5-4-4 350 g 1 pc(s) 48 781 000 151086 5-8-4 12 kg 1 pc(s) 103781 010 148444 5-8-4 516 g 1 pc(s) 103781 020 148451 5-8-4 1.36 kg 1 pc(s) 103781 030 149113 5-8-4 1.4 kg 1 pc(s) 103781 040 148390 5-8-4 894 g 1 pc(s) 105781 060 148406 5-8-4 906 g 1 pc(s) 105781 080 148284 5-8-4 270 g 1 pc(s) 105781 085 148420 5-8-4 383 g 1 pc(s) 105781 090 148413 5-8-4 230 g 1 pc(s) 105781 100 148437 5-8-4 355 g 1 pc(s) 104781 110 149120 5-8-4 105 g 1 pc(s) 104781 130 152144 5-8-4 67 g 1 pc(s) 104781 150 152175 5-8-4 94 g 1 pc(s) 104781 170 152182 5-8-4 104 g 1 pc(s) 104781 190 152199 5-8-4 167 g 1 pc(s) 104781 220 151666 5-8-4 12.97 kg 1 pc(s) 104781 230 153813 5-8-4 18.9 kg 1 pc(s) 103 782 000 239401 5-8-5 4.03 kg 1 pc(s) 102782 010 230804 5-8-5 105 g 1 pc(s) 102782 020 236509 5-8-5 10 g 1 Set 102782 022 236516 5-8-5 20 g 1 Set 102782 024 237193 5-8-5 36 g 1 Set 102

782 028 237223 5-8-5 66 g 1 Set 102782 030 245792 5-8-5 1189 g 1 pc(s) 101782 031 245815 5-8-5 1189 g 1 pc(s) 101782 040 245822 5-8-5 776 g 1 pc(s) 101782 041 245839 5-8-5 776 g 1 pc(s) 101782 050 245846 5-8-5 844 g 1 pc(s) 101782 051 245853 5-8-5 844 g 1 pc(s) 101782 060 245860 5-8-5 279 g 1 pc(s) 102782 075 245877 5-8-5 34 g 1 pc(s) 102782 080 245884 5-8-5 67 g 1 pc(s) 102782 090 245891 5-8-5 101 g 1 pc(s) 102 784 032 018679 5-4-1 969 g 1 pc(s) 44784 038 138452 5-4-1 1.01 kg 1 pc(s) 44784 085 018686 5-4-1 872 g 1 pc(s) 44784 201 006591 5-4-1 880 g 1 pc(s) 43784 301 006553 5-4-1 1.7 kg 1 pc(s) 43784 352 006072 5-5-2 806 g 1 pc(s) 46784 401 006614 5-4-1 1.3 kg 1 pc(s) 43784 461 118799 5-4-1 1.28 kg 1 pc(s) 44784 463 118805 5-4-1 1.62 kg 1 pc(s) 45784 480 054479 5-4-1 600 g 1 pc(s) 44784 490 118812 5-4-1 533 g 3 pc(s) 44784 501 006560 5-4-1 1.95 kg 1 pc(s) 43784 755 054202 5-5-2 1.54 kg 1 pc(s) 46784 756 230118 5-5-2 — 1 pc(s) 46 785 100 087606 5-8-1 18 kg 1 pc(s) 78785 109 098176 5-8-1 504 g 1 pc(s) 86785 111 070257 5-1-8 612 g 1 pc(s) 120785 112 106550 5-8-1 17.8 kg 1 pc(s) 78785 119 098213 5-8-1 700 g 1 pc(s) 87785 120 087613 5-8-1 700 g 1 pc(s) 82785 121 087620 5-8-1 110 g 1 pc(s) 82785 122 087637 5-8-1 220 g 1 pc(s) 82785 123 087644 5-8-1 430 g 1 pc(s) 82785 130 087651 5-8-1 130 g 1 pc(s) 81785 131 087668 5-8-1 160 g 1 pc(s) 81785 132 087675 5-8-1 150 g 1 pc(s) 81785 140 087682 5-8-1 340 g 1 pc(s) 82785 150 087699 5-8-1 320 g 1 pc(s) 82785 151 087705 5-8-1 260 g 1 pc(s) 82785 160 087712 5-8-1 90 g 1 pc(s) 82785 170 087729 5-8-1 255 g 1 pc(s) 83785 171 082106 5-8-1 105 g 1 pc(s) 83785 172 082113 5-8-1 100 g 1 pc(s) 83785 180 073869 5-8-1 150 g 1 pc(s) 85785 181 106413 5-8-1 195 g 1 pc(s) 85785 190 110359 5-8-1 389 g 1 pc(s) 85785 200 087354 5-8-1 180 g 1 pc(s) 85785 210 087743 5-8-1 260 g 1 pc(s) 86785 212 082120 5-8-1 71 g 1 pc(s) 85785 213 090279 5-8-1 320 g 1 pc(s) 86785 214 090286 5-8-1 320 g 1 pc(s) 86785 215 090293 5-8-1 320 g 1 pc(s) 86785 216 090309 5-8-1 320 g 1 pc(s) 86785 217 090316 5-8-1 320 g 1 pc(s) 86785 218 090323 5-8-1 320 g 1 pc(s) 86785 219 090330 5-8-1 320 g 1 pc(s) 86785 220 087750 5-8-1 82 g 1 pc(s) 83785 221 087767 5-8-1 200 g 1 pc(s) 83785 223 098183 5-8-1 290 g 1 pc(s) 83785 224 106482 5-8-1 11 g 1 Set 85785 225 136434 5-8-1 140 g 1 pc(s) 87785 229 106260 5-8-1 6 kg 1 pc(s) 81785 259 094789 5-8-1 320 g 1 pc(s) 85



Inde

x


785 260 110304 5-8-1 21.5 kg 1 pc(s) 89785 261 110298 5-8-1 760 g 1 pc(s) 89785 264 098206 5-8-1 2.5 kg 1 pc(s) 89785 265 097049 5-8-1 7.29 kg 1 pc(s) 90785 266 097056 5-8-1 709 g 1 pc(s) 91785 267 097063 5-8-1 291 g 1 pc(s) 91785 268 097070 5-8-1 293 g 1 pc(s) 91785 269 097087 5-8-1 292 g 1 pc(s) 91785 271 097100 5-8-1 17 g 1 pc(s) 91785 272 097117 5-8-1 21 g 1 pc(s) 91785 273 097124 5-8-1 270 g 1 pc(s) 91785 274 100015 5-8-1 33 g 1 Set 84785 275 100022 5-8-1 63 g 1 Set 84785 279 100060 5-8-1 68 g 1 Set 84785 280 100039 5-8-1 60 g 1 Set 84785 281 095724 5-8-1 15 g 12 pc(s) 92785 282 095731 5-8-1 7 g 12 pc(s) 92785 283 095748 5-8-1 8 g 12 pc(s) 92785 284 095755 5-8-1 7 g 12 pc(s) 92785 295 114999 5-8-1 2.5 kg 1 pc(s) 89785 298 115316 5-8-1 3.41 kg 1 pc(s) 91785 299 115071 5-8-1 5.4 kg 1 pc(s) 89785 301 106246 5-8-1 6 kg 1 pc(s) 81785 310 092013 5-8-1 12.7 kg 1 pc(s) 86785 315 106277 5-8-1 632 g 1 pc(s) 82785 316 106284 5-8-1 95 g 1 pc(s) 82785 317 106291 5-8-1 130 g 1 pc(s) 82785 318 106307 5-8-1 152 g 1 pc(s) 82785 319 106314 5-8-1 247 g 1 pc(s) 82785 320 106321 5-8-1 88 g 1 pc(s) 84785 321 106338 5-8-1 97 g 1 pc(s) 84785 322 106345 5-8-1 132 g 1 pc(s) 84785 323 106352 5-8-1 182 g 1 pc(s) 84785 324 106369 5-8-1 89 g 1 pc(s) 84785 325 106581 5-8-1 600 g 1 pc(s) 82785 398 146532 5-8-1 156 g 1 pc(s) 90785 399 146525 5-8-1 757 g 1 pc(s) 90785 408 117914 5-8-1 9.8 kg 1 pc(s) 94785 427 086838 5-8-2 300 g 1 pc(s) 93785 440 127524 5-8-1 2.25 kg 1 pc(s) 94785 441 127531 5-8-1 2.2 kg 1 pc(s) 94785 442 152847 5-8-0 280 g 1 pc(s) 120785 443 152854 5-8-0 520 g 1 pc(s) 120785 445 127548 5-8-1 1.07 kg 1 pc(s) 94785 455 088337 5-8-2 3.6 kg 1 pc(s) 95

785 456 086821 5-8-2 3.6 kg 1 m 95785 457 087880 5-8-2 36 kg 1 pc(s) 95785 458 115064 5-8-2 5.8 kg 1 m 95785 459 115057 5-8-2 56 kg 1 pc(s) 95785 465 088733 5-8-2 41.5 kg 1 pc(s) 94785 466 088030 5-8-2 830 g 1 m 94785 467 088740 5-8-2 38 kg 1 pc(s) 95785 468 088757 5-8-2 1.64 kg 1 m 95785 471 088764 5-8-2 20 kg 1 pc(s) 95785 472 087057 5-8-2 1.95 kg 1 m 95785 490 086890 5-8-2 240 g 1 pc(s) 93785 491 088306 5-8-2 140 g 1 Pair 93785 492 086883 5-8-2 140 g 1 Pair 93785 493 088894 5-8-2 160 g 1 Pair 93785 494 088320 5-8-2 160 g 1 Pair 93785 495 088900 5-8-2 290 g 1 Pair 93785 496 088917 5-8-2 290 g 1 Pair 93785 497 088924 5-8-2 660 g 1 pc(s) 93785 502 087347 5-8-1 7.2 kg 1 pc(s) 75785 506 081444 5-8-1 5.3 kg 1 pc(s) 75785 515 087361 5-8-1 68 g 1 pc(s) 77785 520 087378 5-8-1 240 g 1 pc(s) 75785 521 087385 5-8-1 107 g 1 pc(s) 75785 522 087408 5-8-1 157 g 1 pc(s) 75785 523 087415 5-8-1 211 g 1 pc(s) 75785 530 087422 5-8-1 118 g 1 pc(s) 75785 540 087439 5-8-1 100 g 1 pc(s) 76785 541 087446 5-8-1 41 g 1 pc(s) 76785 542 087453 5-8-1 42 g 1 pc(s) 76785 543 087460 5-8-1 43 g 1 pc(s) 76785 550 087477 5-8-1 104 g 1 pc(s) 77785 551 106468 5-8-1 34 g 1 pc(s) 83785 552 106543 5-8-1 47 g 1 pc(s) 83785 555 087484 5-8-1 100 g 1 pc(s) 77785 560 087491 5-8-1 52 g 1 pc(s) 76785 570 087507 5-8-1 47 g 1 pc(s) 77785 580 106574 5-8-1 48 g 1 pc(s) 77785 585 106567 5-8-1 21 g 1 pc(s) 86785 590 087538 5-8-1 50 g 1 pc(s) 76785 591 087545 5-8-1 47 g 1 pc(s) 76785 592 087552 5-8-1 50 g 1 pc(s) 87785 595 087569 5-8-1 15 g 1 Set 77785 596 087576 5-8-1 18 g 1 Set 77785 637 100701 5-8-2 14 g 10 pc(s) 13785 638 086920 5-8-2 6 g 10 pc(s) 13



Inde

x


785 639 087019 5-8-2 15 g 10 pc(s) 13785 640 087026 5-8-2 55 g 10 pc(s) 13785 641 087897 5-8-2 55 g 10 pc(s) 13785 642 087903 5-8-2 75 g 10 pc(s) 13785 643 087910 5-8-2 80 g 10 pc(s) 13785 644 087927 5-8-2 80 g 10 pc(s) 13785 645 086869 5-8-2 420 g 1 pc(s) 93785 646 089174 5-8-2 760 g 1 pc(s) 95785 647 087040 5-8-2 73 g 1 pc(s) 96785 648 088047 5-8-2 19 g 1 pc(s) 96785 649 088054 5-8-2 2 g 1 pc(s) 96785 650 106536 5-8-2 22 g 10 pc(s) 13785 652 111479 5-8-2 9 g 10 pc(s) 13785 740 138360 5-8-0 336 g 1 pc(s) 100785 741 138377 5-8-0 336 g 1 pc(s) 100785 742 138384 5-8-0 336 g 1 pc(s) 100785 743 138391 5-8-0 336 g 1 pc(s) 100785 744 138407 5-8-0 336 g 1 pc(s) 100785 746 138414 5-8-0 379 g 1 pc(s) 100785 747 138421 5-8-0 379 g 1 pc(s) 100785 748 138438 5-8-0 388 g 1 pc(s) 100785 749 138445 5-8-0 388 g 1 pc(s) 100785 751 157279 5-8-2 16 g 1 pc(s) 100785 752 245082 5-8-0 — 1 Set 100785 753 245143 5-8-0 — 1 pc(s) 100785 755 152861 5-8-0 2.35 kg 1 pc(s) 98785 756 152878 5-8-0 2.5 kg 1 pc(s) 98785 757 152885 5-8-0 2.7 kg 1 pc(s) 98785 758 245150 5-8-0 2.9 kg 1 pc(s) 98785 769 152007 5-8-0 1.67 kg 1 pc(s) 98785 770 149458 5-8-0 1.71 kg 1 pc(s) 98785 771 149465 5-8-0 1.86 kg 1 pc(s) 98785 772 149472 5-8-0 1.89 kg 1 pc(s) 98785 773 149489 5-8-0 1.9 kg 1 pc(s) 98785 774 149502 5-8-0 1.94 kg 1 pc(s) 98785 775 149519 5-8-0 1.96 kg 1 pc(s) 98785 779 151994 5-8-0 1.49 kg 1 pc(s) 98785 780 149526 5-8-0 1.54 kg 1 pc(s) 98785 781 149533 5-8-0 1.63 kg 1 pc(s) 98785 782 149540 5-8-0 1.66 kg 1 pc(s) 98785 783 149557 5-8-0 1.76 kg 1 pc(s) 98785 784 149564 5-8-0 1.8 kg 1 pc(s) 98785 785 149571 5-8-0 2.04 kg 1 pc(s) 98785 788 149588 5-8-0 112 g 1 pc(s) 99785 789 149595 5-8-0 75 g 1 Pair 99

785 796 124912 5-8-0 163 g 1 Pair 97785 797 124936 5-8-0 169 g 1 Pair 97785 798 124943 5-8-0 180 g 1 Pair 97785 799 124950 5-8-0 196 g 1 Pair 97785 800 131019 5-8-0 202 g 1 Pair 97785 808 242265 5-8-0 250 g 1 Pair 97785 809 242296 5-8-0 270 g 1 Pair 97785 810 242302 5-8-0 290 g 1 Pair 97785 811 242319 5-8-0 310 g 1 Pair 97785 812 242326 5-8-0 330 g 1 Pair 97785 940 106253 5-8-1 10.85 kg 1 pc(s) 79785 950 106383 5-8-1 27.3 kg 1 pc(s) 80785 951 106390 5-8-1 21.2 kg 1 pc(s) 81785 952 106406 5-8-1 1.43 kg 1 pc(s) 81785 953 106451 5-8-1 121 g 1 pc(s) 85 790 150 005365 5-4-1 450 g 1 pc(s) 48790 160 018693 5-4-1 737 g 1 pc(s) 48790 250 089495 5-3-1 193 g 1 pc(s) 35790 251 089501 5-3-1 248 g 1 pc(s) 35790 260 089518 5-3-1 180 g 1 pc(s) 35790 261 089525 5-3-1 277 g 1 pc(s) 35 792 030 005853 5-4-1 610 g 1 pc(s) 49792 190 068315 5-4-1 1.2 kg 1 pc(s) 49792 450 051744 5-5-2 2.95 kg 1 pc(s) 49792 451 230170 5-5-2 — 1 pc(s) 49792 453 054226 5-5-2 2.95 kg 1 pc(s) 49792 454 230194 5-5-2 — 1 pc(s) 49 795 001 011816 5-3-0 1 kg 1 m 41795 040 077393 5-4-1 890 g 1 pc(s) 63795 213 053243 5-4-1 114 g 1 pc(s) 63795 214 051799 5-4-1 118 g 1 pc(s) 63 799 006 157347 5-1-8 4 kg 1 pc(s) 47799 009 123298 5-4-4 5.1 kg 1 pc(s) 46799 019 123304 5-4-4 328 g 1 pc(s) 46799 100 237094 5-7-6 12.2 kg 1 pc(s) 109 923 110 092426 5-7-4 40 g 10 pc(s) 111923 116 085978 5-7-4 42 g 10 pc(s) 111923 117 093478 5-7-4 42 g 10 pc(s) 111923 118 104969 5-7-4 38 g 10 pc(s) 111923 119 104976 5-7-4 38 g 10 pc(s) 112



Inde

x

Variant No. / GTIN* / PG / Weight / PU / VE / Page

V11E77B 163515 5-4-0 5.52 kg 1 pc(s) 39V162LDM 162655 5-4-0 1.38 kg 1 pc(s) 65V18JQHQ 163546 5-4-0 1.91 kg 1 pc(s) 39V1KPXFR 165427 5-4-0 9.85 kg 1 pc(s) 53V1RC3P2 163737 5-4-0 590 g 1 pc(s) 67V1TDM78 165311 5-4-0 10 kg 1 pc(s) 63V27E2GP 163980 5-4-0 10 kg 1 pc(s) 40V291ZZT 163997 5-4-0 10 kg 1 pc(s) 40V2KWXUL 165588 5-4-0 10 kg 1 pc(s) 55V2WPYVF 165601 5-4-0 8.06 kg 1 pc(s) 55V3CM9FR 165687 5-4-0 10 kg 1 pc(s) 56V3NCSHX 164031 5-4-0 10 kg 1 pc(s) 40V3RQASE 163744 5-4-0 10 kg 1 pc(s) 67V3WJMYY 163676 5-4-0 3.65 kg 1 pc(s) 53V43FCV8 165571 5-4-0 10 kg 1 pc(s) 55V4RJ7A2 165526 5-4-0 5.76 kg 1 pc(s) 55V4YPRGE 165243 5-4-0 1.14 kg 1 pc(s) 38V5SVXPH 164727 5-4-0 6.33 kg 1 pc(s) 54V5VN56Z 165465 5-4-0 4.81 kg 1 pc(s) 54V6VE249 164185 5-4-0 10 kg 1 pc(s) 40V7265NS 163355 5-4-0 10 kg 1 pc(s) 38V76D5TH 164178 5-4-0 10 kg 1 pc(s) 40V797FE6 163188 5-4-0 6.65 kg 1 pc(s) 38V7GN8WU 162389 5-4-0 4.62 kg 1 pc(s) 40V8115WA 163508 5-4-0 4.6 kg 1 pc(s) 39V8D4AQ2 163485 5-4-0 6.04 kg 1 pc(s) 39V8MCNWM 165441 5-4-0 10 kg 1 pc(s) 54V8PPJEF 165649 5-4-0 10 kg 1 pc(s) 56V8VF7CP 165458 5-4-0 6.29 kg 1 pc(s) 54V93UVAP 164024 5-4-0 10 kg 1 pc(s) 40V9JF26K 163294 5-4-0 2.09 kg 1 pc(s) 38VA3926U 165403 5-4-0 6.81 kg 1 pc(s) 53VAB3PJV 165410 5-4-0 7.8 kg 1 pc(s) 53VABRSSE 164048 5-4-0 10 kg 1 pc(s) 40VACNLP8 165540 5-4-0 7.51 kg 1 pc(s) 55VAM7M6H 165267 5-4-0 4.25 kg 1 pc(s) 38VB1DETL 165632 5-4-0 10 kg 1 pc(s) 56VB53TC9 163270 5-4-0 10 kg 1 pc(s) 38VCEY1U6 165397 5-4-0 5.33 kg 1 pc(s) 53VCS8GYU 165304 5-4-0 10 kg 1 pc(s) 63VD28FAD 165434 5-4-0 3.94 kg 1 pc(s) 54VDXTBGF 164192 5-4-0 10 kg 1 pc(s) 40VDZ2VDX 163843 5-4-0 1.38 kg 1 pc(s) 67VE5E8FZ 165557 5-4-0 10 kg 1 pc(s) 55VE5K3HM 162679 5-4-0 1.53 kg 1 pc(s) 65VE5MT89 163522 5-4-0 10 kg 1 pc(s) 39VE9HQHJ 165496 5-4-0 7.91 kg 1 pc(s) 54VEH4JQY 163850 5-4-0 10 kg 1 pc(s) 65VF33XR2 165564 5-4-0 10 kg 1 pc(s) 55VFV1Z7K 163331 5-4-0 10 kg 1 pc(s) 38VFZ17TJ 165663 5-4-0 10 kg 1 pc(s) 56VG3V6T2 165298 5-4-0 7.32 kg 1 pc(s) 39VG4GXHQ 165618 5-4-0 10 kg 1 pc(s) 55VGCMAA5 162518 5-4-0 10 kg 1 pc(s) 40

VGJD2QX 165373 5-4-0 10 kg 1 pc(s) 53VGM214B 164017 5-4-0 10 kg 1 pc(s) 40VGUVRRG 164000 5-4-0 1.67 kg 1 pc(s) 40VH8QTCZ 163775 5-4-0 5.43 kg 1 pc(s) 70VH95BZZ 165274 5-4-0 3.54 kg 1 pc(s) 39VHBWUNH 163645 5-4-0 7.86 kg 1 pc(s) 54VHV1NKR 164147 5-4-0 10 kg 1 pc(s) 40VJ13VWW 162136 5-4-0 2.26 kg 1 pc(s) 38VJ7VGZD 163553 5-4-0 2.67 kg 1 pc(s) 39VKB2Q6J 163829 5-4-0 5.58 kg 1 pc(s) 70VKZLVU3 165502 5-4-0 7.9 kg 1 pc(s) 54VLB2F3G 163607 5-4-0 3.83 kg 1 pc(s) 39VLL6JWS 163348 5-4-0 6.08 kg 1 pc(s) 38VLUZZB9 165342 5-4-0 10 kg 1 pc(s) 63VM2J7S3 165281 5-4-0 5.05 kg 1 pc(s) 39VMBDCM1 165519 5-4-0 5.09 kg 1 pc(s) 55VMLM2BZ 165489 5-4-0 6.47 kg 1 pc(s) 54VMRSJWD 163805 5-4-0 1.1 kg 1 pc(s) 65VMZDL8N 165625 5-4-0 10 kg 1 pc(s) 56VN35H5D 163560 5-4-0 2.19 kg 1 pc(s) 39VN63A91 163812 5-4-0 5.4 kg 1 pc(s) 70VNC1S9W 163539 5-4-0 1.56 kg 1 pc(s) 39VNYHZGF 165366 5-4-0 10 kg 1 pc(s) 63VP6YV4T 162686 5-4-0 6.13 kg 1 pc(s) 70VPH98CT 165472 5-4-0 6.29 kg 1 pc(s) 54VPHPZV2 163379 5-4-0 10 kg 1 pc(s) 38VPZBBSL 163317 5-4-0 4 kg 1 pc(s) 38VQ7PF5A 164154 5-4-0 10 kg 1 pc(s) 40VQKTK4T 163768 5-4-0 5.23 kg 1 pc(s) 70VQY44GL 165656 5-4-0 10 kg 1 pc(s) 56VQYP8B2 163195 5-4-0 4.62 kg 1 pc(s) 54VRAB9WB 165533 5-4-0 6.72 kg 1 pc(s) 55VRDSN66 163669 5-4-0 10 kg 1 pc(s) 53VRJG23Y 163300 5-4-0 2.93 kg 1 pc(s) 38VRP32FL 165595 5-4-0 10 kg 1 pc(s) 55VSB29AH 162662 5-4-0 800 g 1 pc(s) 68VSHDQZB 163836 5-4-0 1.71 kg 1 pc(s) 67VSUN6NV 163782 5-4-0 1.56 kg 1 pc(s) 67VSY71K4 163287 5-4-0 980 g 1 pc(s) 38VTCS2XV 163584 5-4-0 2.84 kg 1 pc(s) 39VTJKEZU 165250 5-4-0 10 kg 1 pc(s) 38VTSY9XH 163621 5-4-0 6.4 kg 1 pc(s) 54VU2EWNF 165328 5-4-0 10 kg 1 pc(s) 63VU8P6LE 165380 5-4-0 10 kg 1 pc(s) 53VUKMT58 163799 5-4-0 1.25 kg 1 pc(s) 67VUQ18JL 165359 5-4-0 10 kg 1 pc(s) 63VUZ656W 165335 5-4-0 10 kg 1 pc(s) 63VVL7AKP 164130 5-4-0 10 kg 1 pc(s) 40VWBDMPS 165670 5-4-0 10 kg 1 pc(s) 56VYKJW2W 211407 5-4-0 10 kg 1 pc(s) 63VZC3FST 163324 5-4-0 5.48 kg 1 pc(s) 38VZKQZB5 164161 5-4-0 10 kg 1 pc(s) 40VZL6TGH 163362 5-4-0 1.31 kg 1 pc(s) 38VZPW9LG 163751 5-4-0 680 g 1 pc(s) 65

Variant No. GTIN* PG Weight PU VE Page Variant No. GTIN* PG Weight PU VE Page


Inde

x

A STK 766 888 125AB 32 46 RW K L... 700 099 113AD ES SQ SK 765 001 51AD ES SQ SQL 765 006 51AD HV STK SQ 766 313 125AD M12 STK 30 350 766 352 134AD ZK 25 200 766 055 134AD ZK STK 30 360 766 359 134AH ISMTC 766 038 128AK 25 ESH STK SN7361 766 372 12AK 36 SK STK 330 766 364 8AK 36 SQ STK 360 766 365 131AK AH ZK ISMTC 766 049 132AK RS 2 ZK MS 785 323 84AK RS S ZK MS 785 324 84AK RS ZK MS 785 322 84AK SD KEV MS 785 267 91AK SD W30 KEV MS 785 268 91AK SD W70 KEV MS 785 269 91AK SQL STK 365 766 465 131AKA TF MS 785 259 85APA B 785 788 99APA KP 785 789 99APC 48 50 785 755 98APC 52 54 785 756 98APC 56 58 785 757 98APC 60 62 785 758 98APG 8 785 796 97APG 8 L 785 808 97APG 9 785 797 97APG 9 L 785 809 97APG 10 785 798 97APG 10 L 785 810 97APG 11 785 799 97APG 11 L 785 811 97APG 12 785 800 97APG 12 L 785 812 97APJ 46 785 769 98APJ 48 785 770 98APJ 50 785 771 98APJ 52 785 772 98APJ 54 785 773 98APJ 56 785 774 98APJ 58 785 775 98APS 12C FS 785 749 100APS 12C SC 785 747 100APS CL2 FS 785 748 100APS CL2 SC 785 746 100APT 46 785 779 98APT 48 785 780 98APT 50 785 781 98APT 52 785 782 98APT 54 785 783 98APT 56 785 784 98APT 58 785 785 98AR STK 766 889 125ARS 65 40 785 443 120AS MS 785 109 86AS SCHR M12 55 705 500 35AS SCHR M12 M12 40 705 504 35AS SCHR M16 55 M12 705 510 35AS SCHR M16 65 750 500 35AS SCHW M12 336 020 35AS SCHW M12 25 705 501 35AS SCHW M16 336 025 35AS SCHW M16 30 755 501 35

ASP A 110 132 16.7 L 767 564 130ASP A 110 420 L ZK 767 591 130ASP A 110 420 S ZK 767 592 130ASP A 110 420 SL ZK 767 593 130ASPS 110 132 16.7 L 767 565 23ASPS 110 420 L 767 571 23ASPS 110 420 S 767 572 23ASPS 110 420 S L 767 573 23ASS 36 STK 30 766 325 7ASS 36 STK 30 43 766 452 7ASSN 36 STK 30 766 326 7ASSN 36 STK 43 766 453 7AT 50 30 785 442 120AT IHS NS 785 490 93AT SPN II 766 543 26ATK 120 ..M NS 785 468 95ATK 120 25M NS 785 467 95ATK 135 ..M NS 785 466 94ATK 135 50M NS 785 465 94ATN 140 ..M NS 785 472 95ATN 140 10M NS 785 471 95

BB 245 MS 785 151 82BEV 2XUKH 70 8500AL 752 192 62BEV BM HZ BDW K 751 193 61BEV BM HZ BDW R 751 197 62BEV MF LTE 751 192 62BEV MF SE K 751 191 61BEV MF SE R 751 196 62BEV OL NPF K 750 210 56BEV OL NPF PKW K 750 196 57BEV OL NPF PKW R 750 216 57BEV OL NPF R 750 218 56BEV OL PF K 750 211 57BEV OL PF PKW K 750 200 58BEV OL PF PKW R 750 217 58BEV OL PF R 750 219 57BEV OL PF V2 K 750 214 58BEV OL PF V2 R 750 221 58BEV SVUL 750 213 59BEV UKH K 70 8500AL 752 191 61BEV UKH K 70 12000AL 752 193 61BEV UKH R 70 8500AL 752 196 62BEV UKH R 70 12000AL 752 197 62BEV US OL ST 750 212 59BEV WHA ZVA 750 215 59BIT 8 SD KEV MS 785 272 91BIT 13 SD KEV MS 785 271 91BS SD KEV MS 1120 785 266 91

DARC HV STG 781 110 104DARC KSP 781 020 103DARC KST 781 030 103DARC LSDH 781 100 104DARC LSH M10 781 080 105DARC LSH SB 781 090 105DARC LSH WB 781 085 105DARC LSHS L 940 781 040 105DARC LSHS R 940 781 060 105DARC PK KSP 781 230 103DARC STG 781 000 103DARC TK 781 220 104DARC TRM 781 010 103DARC VL 10 500 781 170 104DARC VL 10 1000 781 190 104DARC VL 4 1000 781 130 104

DARC VL 4 1500 781 150 104DGF EKV VI 745 921 66DHTM 785 180 85DHTM T 625 785 181 85DP 40 40 B13 AL 525 001 127DP 50 50 B17 AL 525 002 127DR PHV 767 778 128DR PS PHE3 767 779 128DSRT DD CPS AACA 782 031 101DSRT DD CPS BACA 782 030 101DSRT DD FS AAAA 782 051 101DSRT DD FS BAAA 782 050 101DSRT DD PS AACA 782 041 101DSRT DD PS BACA 782 040 101DSRT FS 5 782 075 102DSRT FS 10 782 080 102DSRT FS 15 782 090 102DSRT LWL 0.75 782 020 102DSRT LWL 2.00 782 022 102DSRT LWL 4.00 782 024 102DSRT LWL 8.00 782 028 102DSRT LWL U 782 010 102DSRT PS 782 060 102DSRT QD 782 000 102

EAB RN 16 FS 790 150 48EAB RN 16 SKN 790 160 48EAP 2 25 KKH HG 728 501 36EAP 2 25 MA US OL 728 502 37EAP 25 SIT US OL 728 503 37EAPA 3 KFP 20 B13 728 522 36EAPA 3 KFP 20 KKH 728 620 36EAPA 3 KFP 25 B13 728 526 36EAPA 3 KFP 25 KKH 728 625 36EAPA 3 RN 16 B13 728 506 36EAPA 3 RN 16 EAB 728 516 36EAS EK FM 12 775 621 48EAS EK FM 16 775 631 48EAS EK FS 12 775 626 48EAS EK FS 16 775 636 48EB 9V AL 767 713 128EB 9V LI 767 712 128EFK FL30 SKN 792 030 49EFK FL40 SKN 792 190 49EFP 16 RN M12 790 250 35EFP 16 RN M12 35 SSM 790 251 35EFP 16 RN M16 790 260 35EFP 16 RN M16 45 SSM 790 261 35EFS L 127 767 576 131EFS S 167 767 577 131EG 00 4A VI 745 922 66EG SK STK 400 745 415 72EG SQ STK 400 745 414 72EG TI EKV 745 400 69EH1 PK FV ZK 784 461 44EH3 PK FV SQL 784 463 45EHH BEV OL 740 124 62EK FL20 FS 745 502 69EK I FL20 DGF 745 602 69EKS 50 BEV 4M 751 040 62EKS 50 BEV 8.5M 751 085 62EKS 50 BEV 12M 751 120 62EKS 50 BEV 13M 751 130 62EKS 50 BEV 14M 751 140 62EKS B10.5 70 4000AL 752 040 62EKS B10.5 70 8500AL 752 085 62

Type / Part No. / Page

Type Part No. Page Type Part No. Page Type Part No. Page


Inde

x

EKS B10.5 70 12000AL 752 120 62EKS B10.5 70 13000AL 752 130 62EKS B10.5 70 14000AL 752 140 62EKS TI KVS SBK 766 302 66EKS TI 2F KVS SBK 745 500 66EKS VI 2F KVS KK 745 903 64EKS VI 2F KVS SBK 745 901 64EKV FD K 70 8500AL 752 086 60EKV FD K 70 12000AL 752 126 60EKV FD K H70 12000AL 752 121 60EKV FD R 70 8500AL 752 087 60EKV FD R 70 12000AL 752 127 60EKV FD R H70 12000AL 752 122 60EKV K 50 8500 751 086 60EKV K 50 12000 751 126 60EKV K H 50 12000 751 121 60EKV LK 50 4000 750 042 61EKV LK UKH 70 4000AL 752 042 61EKV R 50 8500 751 087 60EKV R 50 12000 751 127 60EKV R H 50 12000 751 122 60EKV ÜGK MB 745 107 71EKV ÜGK MB S 745 105 71EKV UK 50 4000 750 041 61EKV UKQ UKH70 4000AL 752 041 61EKV1+0 16 V4YPRGE V4YPRGE 38EKV1+0 25 VSY71K4 VSY71K4 38EKV1+0 35 V9JF26K V9JF26K 38EKV1+0 50 VRJG23Y VRJG23Y 38EKV1+0 70 VPZBBSL VPZBBSL 38EKV1+0 95 VZC3FST VZC3FST 38EKV1+0 120 V797FE6 V797FE6 38EKV1+0 150 VB53TC9 VB53TC9 38EKV1+1 16 VE5E8FZ VE5E8FZ 55EKV1+1 16 VMZDL8N VMZDL8N 56EKV1+1 25 VB1DETL VB1DETL 56EKV1+1 25 VF33XR2 VF33XR2 55EKV1+1 35 V43FCV8 V43FCV8 55EKV1+1 35 V8PPJEF V8PPJEF 56EKV1+1 50 V2KWXUL V2KWXUL 55EKV1+1 50 VQY44GL VQY44GL 56EKV1+1 70 VFZ17TJ VFZ17TJ 56EKV1+1 70 VRP32FL VRP32FL 55EKV1+1 95 V2WPYVF V2WPYVF 55EKV1+1 95 VWBDMPS VWBDMPS 56EKV1+1 120 V3CM9FR V3CM9FR 56EKV1+1 120 VG4GXHQ VG4GXHQ 55EKV2 50 KKH 600 1800 751 150 61EKV2+0 16 G V7265NS V7265NS 38EKV2+0 25 G VZL6TGH VZL6TGH 38EKV2+0 35 G VPHPZV2 VPHPZV2 38EKV2+0 50 G VJ13VWW VJ13VWW 38EKV2+0 70 G VTJKEZU VTJKEZU 38EKV2+0 95 G VAM7M6H VAM7M6H 38EKV2+0 120 G VFV1Z7K VFV1Z7K 38EKV2+0 150 G VLL6JWS VLL6JWS 38EKV3 16TI EK VSB29AH VSB29AH 68EKV3 16TI HK V3RQASE V3RQASE 67EKV3 16VI EK VZPW9LG VZPW9LG 65EKV3 25BS ZK VQKTK4T VQKTK4T 70EKV3 25IS ZK VH8QTCZ VH8QTCZ 70EKV3 25TI DG VSUN6NV VSUN6NV 67EKV3 25TI HK VUKMT58 VUKMT58 67EKV3 25VI DG V162LDM V162LDM 65EKV3 25VI EK VMRSJWD VMRSJWD 65EKV3 35BS ZK VN63A91 VN63A91 70

EKV3 35IS ZK VKB2Q6J VKB2Q6J 70EKV3 35TI DG VSHDQZB VSHDQZB 67EKV3 35TI HK VDZ2VDX VDZ2VDX 67EKV3 35VI DG VE5K3HM VE5K3HM 65EKV3 35VI EK VEH4JQY VEH4JQY 65EKV3 50IS ZK VP6YV4T VP6YV4T 70EKV3 NH00 TI V1RC3P2 V1RC3P2 67EKV3+0 16 G VE5MT89 VE5MT89 39EKV3+0 25 G VNC1S9W VNC1S9W 39EKV3+0 35 G V18JQHQ V18JQHQ 39EKV3+0 50 G VJ7VGZD VJ7VGZD 39EKV3+0 70 G VH95BZZ VH95BZZ 39EKV3+0 95 G VM2J7S3 VM2J7S3 39EKV3+0 120 G V8D4AQ2 V8D4AQ2 39EKV3+0 150 G VG3V6T2 VG3V6T2 39EKV3+0 50 R VN35H5D VN35H5D 39EKV3+0 70 R VTCS2XV VTCS2XV 39EKV3+0 95 R VLB2F3G VLB2F3G 39EKV3+0 120 R V8115WA V8115WA 39EKV3+0 150 R V11E77B V11E77B 39EKV3+1 16 G V8MCNWM V8MCNWM 54EKV3+1 16 G VGJD2QX VGJD2QX 53EKV3+1 25 G V8VF7CP V8VF7CP 54EKV3+1 25 G VRDSN66 VRDSN66 53EKV3+1 35 G V3WJMYY V3WJMYY 53EKV3+1 35 G V5VN56Z V5VN56Z 54EKV3+1 50 G VPH98CT VPH98CT 54EKV3+1 50 G VU8P6LE VU8P6LE 53EKV3+1 70 G VCEY1U6 VCEY1U6 53EKV3+1 70 G VMLM2BZ VMLM2BZ 54EKV3+1 95 G VA3926U VA3926U 53EKV3+1 95 G VE9HQHJ VE9HQHJ 54EKV3+1 120 G VAB3PJV VAB3PJV 53EKV3+1 120 G VKZLVU3 VKZLVU3 54EKV3+1 150 G V1KPXFR V1KPXFR 53EKV3+1 50 R VD28FAD VD28FAD 54EKV3+1 50 R VMBDCM1 VMBDCM1 55EKV3+1 70 R V4RJ7A2 V4RJ7A2 55EKV3+1 70 R VQYP8B2 VQYP8B2 54EKV3+1 95 R V5SVXPH V5SVXPH 54EKV3+1 95 R VRAB9WB VRAB9WB 55EKV3+1 120 R VACNLP8 VACNLP8 55EKV3+1 120 R VTSY9XH VTSY9XH 54EKV3+1 150 R VHBWUNH VHBWUNH 54EKV4U0 16 G VGUVRRG VGUVRRG 40EKV4U0 25 G VGM214B VGM214B 40EKV4U0 35 G V93UVAP V93UVAP 40EKV4U0 50 G V3NCSHX V3NCSHX 40EKV4U0 70 G V7GN8WU V7GN8WU 40EKV4U0 95 G VABRSSE VABRSSE 40EKV4U0 120 G V27E2GP V27E2GP 40EKV4U0 150 G V291ZZT V291ZZT 40EKV5+0 16 G VQ7PF5A VQ7PF5A 40EKV5+0 25 G VZKQZB5 VZKQZB5 40EKV5+0 35 G V76D5TH V76D5TH 40EKV5+0 50 G V6VE249 V6VE249 40EKV5+0 70 G VDXTBGF VDXTBGF 40EKV5+0 95 G VGCMAA5 VGCMAA5 40EKV5+0 120 G VVL7AKP VVL7AKP 40EKV5+0 150 G VHV1NKR VHV1NKR 40EL M8 G PHE 766 924 123EL M8 H PHE 766 923 123EL M8 MAG PHE PHV 766 915 123EL M8 S PHE PHV 766 925 123EL M8 SZ PHE PHV 766 913 123EL M8 V PHE PHV 766 927 123

EP 25 K NS 785 595 77EP 25 L MS 785 224 85EP 25 L NS 785 596 77EP NH00 TI M10 745 302 68EP NH00 VI TA 745 905 65EP NH1 3 TI GL M10 745 017 68EP NH1 3 TI M10 745 018 68EP NH1 3 VI TA 745 910 65EP NH4A TI M10 745 016 68EP NH4A VI TA 745 915 66ERO BSP ASSM10 1000 STTZN 644 000 46ES 3P FL ER 799 009 46ES SK 1000 761 010 50ES SK 1500 761 015 50ES SK STK 1000 761 001 50ES SK STK 2000 761 003 50ES SQ 1000 761 011 50ES SQ 1500 761 016 50ES SQ STK 1000 761 002 50ES SQ STK 2000 761 004 50ES SQL ALSTK 1035 769 516 132ES SQL STK 43 1045 766 074 131ES YM2 16 716 001 41ES YM2 25 725 001 41ES YM2 35 735 001 41ES YM2 50 750 001 41ES YM2 70 770 001 41ES YM2 95 795 001 41ES YM2 120 712 001 41ES YM2 150 715 001 41ESE E27 KBI M10 745 203 69ESE E27 TI M10 745 201 68ESE E33 KBI M10 745 204 69ESE E33 TI M10 745 202 68ESH 1000 S B 785 743 100ESH 1000 S O 785 742 100ESH 1000 S R 785 744 100ESH 1000 S W 785 741 100ESH 1000 S Y 785 740 100ESP HVS 1500 799 006 47ESS 3P M10 FM 799 019 46ESS STK 43 766 450 8ESSN STK 43 766 451 8EST ES 1500 769 505 52EST KS SQL 1500 769 503 51EST SK STK 920 761 070 50EST SQ STK 920 761 075 50EST SQL RW 4855 TA 769 515 53EST SQL RW 4915 TA 769 506 52EST ZS 1500 769 504 52ESTC SQL 4000 769 400 51ESTC SQL 5000 769 500 51ESTC SQL H RW 5000 769 508 52ESTC SQL RW 3500 769 352 52ESTC SQL RW 5000 769 502 52ESTC SQL STK 3000 769 300 51EV EH 1725 EK 758 015 116EV EHB 1600 SN7114 758 028 116EV TES 465 EK 758 020 115EV TES 465 EZ 758 021 115EV TES 465 KS10 758 022 115EV TES STK 1500 KS 758 025 116EV TS 1470 SN7685 758 031 116EV TS 2000 EK 758 001 115EV TS 2000 EZ 758 003 115




Inde

x

FD 110 MS 785 221 83FD 210 MS 785 223 83FD 35 NS 785 541 76FD 35 P NS 785 590 76FD 35 S MS 785 551 83FD 35 S NS 785 542 76FD 35 W P MS 785 552 83FD 35 W P NS 785 591 76FD 55 NS 785 540 76FD 60 MS 785 220 83FD 60 MS SN7271 785 225 87FEK 4 15 TS FSQL 784 755 46FEK4 15 TS FSQL AB29 784 756 46FR A12 V2A 524 912 127FR A16 V2A 524 913 127FRS ZK MS 785 940 79FSG PHE 767 776 128FSG PHG2 PHV 767 777 128FWD 35 P NS 785 592 87

GL 3.5V 0.2A E10 766 605 128

H AB 32 46 K 700 098 113H STK 43 800 766 120 135HISC 1400 785 310 86HK 8 NS 785 648 96HOEL 36 20 1100 785 399 90HRB 120 MS 785 140 82HRB 190 MS 785 150 82HSA194 110 420 16.7 767 542 24HSA205 U 1 420 STK 767 552 24 HV 3HH 700 015 126HV 3HH ET 700 005 126HV 3HH SZ 700 014 126HV 3HH SZ ET 700 004 126HV ALSTK 1035 769 517 136HV ALSTK AK RW 1035 769 519 136HV ALSTK RW 1035 769 518 136HV EKV ES30 700 000 126HV EKV ES30 1500 700 003 126HV EKV ES40 700 002 126HV P ST D24 700 006 126HV P ST D30 700 007 126HV P ST D40 45 700 008 126HV STK 30 710 766 335 135HV STK 43 1045 766 076 135HV STK 43 1280 766 466 135HV STK 43 2350 766 073 135HV STK 43 910 766 456 135HV STK 43 975 766 077 135HV STK RW 43 1045 766 078 135HV STK RW 43 975 766 079 135HVTC STK 4100 SN7359 766 469 12

IE UF LF 150 785 440 94IE UF LF 200 785 441 94IHS 0 M 9 NS 785 493 93IHS 0 M 10 NS 785 494 93IHS 00 M 9 NS 785 491 93IHS 00 M 10 NS 785 492 93IHS 00 RC 9 NS 785 495 93IHS 00 RC 10 NS 785 496 93IMG SAN 1M ..M 785 458 95IMG SAN 1M 10M 785 459 95IMG SI ..M NS 785 456 95IMG SI 1M NS 785 455 95

IMG SI 10M NS 785 457 95INFL MS 785 261 89IS 25 ZK 2885 766 048 133IS 25 ZK RK 3160 766 340 88IS 36 SK 1000 766 001 8IS 36 SK 1500 766 002 8IS 36 SK STK 1000 766 100 9IS 36 SQ 1000 766 311 8IS 36 SQ 1500 766 315 8IS 36 SQ STK 1000 766 301 9IS 36 STK 30 1280 766 363 133IS 36 STK 43 1280 766 463 133IS 36 ZK STK 1300 785 325 82IS 123 SK STK 2000 766 122 9IS 123 SQ STK 2000 766 322 9IS M12 AK 635 766 328 132IS M12 STK 30 720 766 072 133IS M12 STK 30 1060 766 075 133IS M12 STK 640 766 331 132IS T 36 ZK STK 1300 785 315 82IS ZK STK 670 766 368 133IS ZK STK HS 670 766 369 132ISMTC N 36 ZK 10600 766 037 133ISN 123 SK STK 2500 766 222 9ISN 123 SQ STK 2500 766 332 9ISN 25 STK 900SN7360 766 371 12ISN 36 SK 1000 766 210 8ISN 36 SK 1500 766 215 8ISN 36 SK STK 1000 766 111 9ISN 36 SQ 1000 766 211 8ISN 36 SQ 1500 766 216 8ISN 36 SQ STK 1000 766 310 9ISN 36 STK 30 1280 766 367 133ISN 36 STK 43 1280 766 468 133ISP 135 ZK MS 785 190 85ISP 36 PVC A1... 763 211 73ISP 36 PVC A2... 763 221 73ISP 36 PVC A3... 763 231 73ISP 36 PVC A4... 763 241 73ISV 220 ZK MS 785 316 82ISV 320 ZK MS 785 317 82ISV 36 STK 30 910 766 356 135ISV 36 STK 30 1280 766 366 135ISV 420 ZK MS 785 318 82ISV 820 ZK MS 785 319 82IT M12 STK 30 700 766 114 134IT M12 STK 30 1150 766 115 134IT STK 43 1280 766 128 134IT ZK30 STK 30 360 766 358 134IV VK13 SW17 1000 785 445 94IW 17.5 890 650 180 785 408 94

KFP 20 M10 754 205 33KFP 20 M12 754 200 33KFP 20 M12 35 SSM 754 235 33KFP 20 M16 754 600 33KFP 20 M16 45 SSM 754 645 33KFP 20 RL 10 720 010 34KFP 20 RL 12 720 012 34KFP 20 RL 14 720 014 34KFP 20 RL 16 720 016 34KFP 20 RL 18 720 018 34KFP 20 RL 20 720 020 34KFP 20 S AL 12 706 300 33KFP 20 W45 M12 706 200 34KFP 20 W45 M12 35SSM 706 235 34

KFP 20 W45 M16 706 600 34KFP 20 W45 M16 45SSM 706 645 34KFP 20 W90 M12 707 200 34KFP 20 W90 M12 35SSM 707 235 34KFP 20 W90 M16 707 600 34KFP 20 W90 M16 45SSM 707 645 34KFP 25 M12 755 200 33KFP 25 M12 25 SSM 755 225 33KFP 25 M12 35 SKM 755 627 33KFP 25 M12 45 SSM 755 245 33KFP 25 M16 755 600 33KFP 25 M16 25 755 636 33KFP 25 M16 25 SKM 755 626 33KFP 25 M16 45 SKM 755 646 33KFP 25 M16 45 SSM 755 645 33KFP 25 RL 10 725 010 34KFP 25 RL 12 725 012 34KFP 25 RL 14 725 014 34KFP 25 RL 16 725 016 34KFP 25 RL 18 725 018 34KFP 25 RL 20 725 020 34KFP 25 S AL 12 756 300 33KFP 25 W45 M12 756 200 34KFP 25 W45 M12 45SSM 756 245 34KFP 25 W45 M16 756 600 34KFP 25 W45 M16 45SSM 756 645 34KFP 25 W90 M12 757 200 34KFP 25 W90 M12 45SSM 757 245 34KFP 25 W90 M16 757 600 34KFP 25 W90 M16 45SSM 757 645 34KK 35 NS 785 647 96KK 56 41 17 EK HK 745 953 118KK 56 41 17 EK VI TI 745 952 64KK M8 0 24 SK 10 745 508 69KK TA 0 24 SK10 745 503 65KKH 20 D SK 772 330 42KKH 20 D SQ 772 331 42KKH 20 FS 772 312 48KKH 20 HG 772 313 48KKH 20 SK 772 310 42KKH 20 SQ 772 311 42KKH 20 SQL 772 314 45KKH 25 D SK 772 340 42KKH 25 D SQ 772 341 42KKH 25 FS 772 322 48KKH 25 HG 772 323 48KKH 25 SK 772 320 42KKH 25 SQ 772 321 42KKH 25 SQL 772 324 45KKL 26 22 5 767 106 118KKL B NFG MS 785 299 89KKL DCA 767 107 118KKL EKS VI KVS 745 902 118KKL EKV ÜGK MB 745 106 71KKL FRS ZK MS 785 229 81KKL PHE 766 997 118KKL PHE L 766 999 118KKL PHE3 767 997 117KKL PHE3 60 110 766 998 118KKL PHE3 L 767 999 117KKL PHV 759 999 118KKL PHV1 759 998 118KKL PK PHE3 L 766 036 117KKL SDS KEV MS 785 298 91KKL TFRS MS 785 951 81KKL TRS MS 785 301 81




Inde

x

KKL TRS NS 785 506 75KLFP M12 KSS 795 040 63KLT 101 30 10 767 996 119KLT 104 9 767 574 119KLT 121 25 16 766 601 119KLT 133 34 10 766 996 119KLT 140 28 785 952 81KLT 160 17 766 614 119KLT 23 16 4 767 500 30KLT 247 10 22 766 602 119KR ESH 1000 785 751 100KS SG BLS 8 766 105 128KS60 8SK A VUZ656W VUZ656W 63KS60 8SK C VYKJW2W VYKJW2W 63KS60 8SQ A VUQ18JL VUQ18JL 63KS60 8SQ C V1TDM78 V1TDM78 63KS60 12SK A VLUZZB9 VLUZZB9 63KS60 12SK C VCS8GYU VCS8GYU 63KS60 12SQ A VNYHZGF VNYHZGF 63KS60 12SQ C VU2EWNF VU2EWNF 63

L71 PS PHE 185 767 766 129L72 PS PHE 405 767 772 129LK 4 40 TS SQL 784 352 46

MA DCA HR LRM 767 133 31MA DCA LR LRM 767 136 31MA DCA XC LRM 767 135 31MA SDS M12 723 199 112MOMS LORE EUK 799 100 109MZ 1.5 IEC LR6 AL 766 618 128MZ 1.5V L91 FR6 LI 4 766 611 128

NFG MS 785 260 89NHS AG 00 3 NS 785 645 93

OEB NFG MS 785 264 89OEK 12 NS 785 649 96

PAP 2 M12 SSM B13 728 312 45PAP 3 M12 SSM B13 RB 728 313 45PAS EK SQ 16 771 316 43PFP 11 33 AL 60 82 731 011 37PFP 11 33 CU 60 82 731 027 37PFP 34 48 AL 60 98 731 013 37PFP 34 48 CU 60 98 731 037 37PFP 49 70 AL 60 126 731 015 37PHE 3 S 767 403 21PHE 6 S 767 406 21PHE 10 S 767 418 21PHE 20 S 767 428 21PHE 30 S 767 438 21PHE 3 10 S 767 410 21PHE 3 20 S FU 1P 767 416 22PHE 6 20 S 767 420 21

PHE 6 20 S 16.7 1P 767 415 22PHE 15 16.7 4T TA 766 616 22PHE 15 16.7 6T TA 766 617 22PHE 15 16.7 BEL STK 767 413 21PHE 15 30 S 767 430 21PHE A 15 16.7 766 677 129PHE PK 15 16.7 766 678 130PHE U 3 30 S 767 433 21PHE3 10 30 S 767 731 15PHE3 10 30 S ZK 767 961 16PHE3 10 30 SL 767 750 16PHE3 10 30 SL ZK 767 950 16PHE3 3 S 767 703 15PHE3 6 S 767 706 15PHE3 10 S 767 710 15PHE3 20 S 767 720 15PHE3 30 S 767 730 15PHE3 3 S ZK 767 903 15PHE3 6 S ZK 767 906 15PHE3 10 S ZK 767 910 15PHE3 20 S ZK 767 920 15PHE3 30 S ZK 767 930 15PHE3 25 S 50 1P 767 125 15PHE3 3 10 S 767 711 15PHE3 3 10 S ZK 767 941 16PHE3 6 20 S 767 721 15PHE3 6 20 S ZK 767 951 16PHE3 6 20 SL 767 740 16PHE3 6 20 SL ZK 767 940 16PHE3 A 10 30 S ZK30 767 965 130PHE3 A 110 132 S 767 129 130PHE3 A 20 SL ZK 767 722 130PHE3 A 30 60 L 767 974 130PHE3 A 30 60 S 767 972 130PHE3 A 60 110 L 767 726 130PHE3 A 60 110 S 767 734 130PHE3 A 60 110 S IT 767 963 130PHE3 A 60 132 SL 767 732 130PHE3 A 60 132 SL ZK 767 735 130PHE3 PK10 30 L SB ZK 767 932 17PHE3 PK10 30 S SB ZK 767 931 17PHE3 PK6 20 L SB ZK 767 922 17PHE3 PK6 20 S SB ZK 767 921 17PHE3 U 3 30 S 767 733 16PHE3 U 3 30 S ZK 767 960 16PHE3S 10 110 S 767 984 20PHE3S 110 132 S 767 131 20PHE3S 20 L ZK 767 725 18PHE3S 20 S ZK 767 724 18PHE3S 30 60 L 767 975 19PHE3S 30 60 S 767 970 18PHE3S2 60 110 L 767 981 19PHE3S2 60 110 S 767 980 19PHE3S2 60 132 SL 767 982 19PHE3S2 60 132 SL ZK 767 983 20

PHEG1.FD P SN7544 767 652 25PHEG1.FD P SN7647 767 656 25PHEG1.S P SN7401 767 666 25PHEG2 P SN7194 767 637 26PHEG2 P SN7259 767 645 26PHEG2 P SN7346 767 639 26PHEG2 P SN7552 767 647 26PHEG2.P SN7517 767 671 25PHG2 10 766 710 24PHG2 20 766 720 24PHG2 6 766 706 24PHSP NS 785 497 93PHV 3 36 STK 759 300 27PHV1 6 12 759 606 28PHV1 12 24 759 612 28PHV1 24 36 759 624 28PHV1 U 6 36 759 616 28PK FV 4 25 784 490 44PS 3 3.6 PHV 759 603 27PS 3 3.6 PHV W90 759 604 28PS 5 7.2 PHV 759 605 27PS 5 7.2 PHV W90 759 608 28PS 10 12 PHV 759 610 27PS 10 12 PHV D11 759 111 27PS 10 12 PHV W90 759 611 28PS 10 17.5 PHV 759 615 27PS 15 24 PHV 759 620 27PS 15 24 PHV L880 759 621 28PS 15 24 PHV W90 759 622 28PS 20 24 PHV D11 759 121 27PS DCA HR LRM 767 150 31PS PHE 15 16.7 766 619 129PSK 10 32 SQL 784 032 44PSK 10 32 SQL SB 784 038 44PSK 10 65 SQL 784 301 43PSK 10 65 SQL EH 784 501 43PSK 10 85 SQL 784 085 44PSK 4 30 SQL 784 201 43PSK 4 30 SQL EH 784 401 43PSK FV 4 30 SQL 784 480 44PSO M8 PHE 766 916 124PSO M8 PHE L800 766 960 124PSO M8 W25 PHE 766 940 124PSO M8 W45 PHE 766 941 125PSO M8 W90 PHE 766 950 125PSS DII 745 109 71PV DCA PC LRM 767 132 30PV DCA PC LRM T 767 139 30

QD 35 W NS 785 543 76

RB 20 NS 785 585 77RB 40 NS 785 580 77RB 50 MS 785 210 86RBK 35 SQ 715 312 42




Inde

x

RD 25 P NS 785 570 77RD 25 S NS 785 560 76REB 1095 MS 785 160 82RED E27 E14 ÜGK MB 745 108 71RFB NFG MS 785 295 89RK 230 100 AS25 766 056 132RP 15 ZK MS 785 321 84RP 250 115 20 766 057 132RS 15104 Z MS 785 279 84RS 1544 MS 785 274 84RS 1574 MS 785 275 84RSD 15104 Z MS 785 280 84RSI 32 785 213 86RSI 34 785 214 86RSI 35 785 215 86RSI 38 785 216 86RSI 45 785 217 86RSI 51 785 218 86RSI 58 785 219 86RST 36 1000 766 040 12RST 36 1500 766 041 12RST 36 2000 766 042 12

S 30 ZK MS 785 320 84S60 PS PHE 285 767 760 129S61 PS PHE 435 767 761 129S62 PS PHE 620 767 762 129S63 PS PHE 780 767 763 129S63 PS PHE 8CK 767 768 124S64 PS PHE 880 767 764 129S65 M PS PHE 905 767 767 124S66 PS PHE 880 767 771 129SA KLFP SK 795 214 63SA KLFP SQ 795 213 63SAG DCA A LRM 767 112 29SAG DCA P HR GA 767 101 29SAG DCA P LRM GA 767 102 29SAK PFE KN 792 450 49SAK PFE KN AB29 792 451 49SAK PFE RA 792 453 49SAK PFE RA AB29 792 454 49SB ESH 1000 S 785 752 100SBKL EKS TI KVS 766 300 117SBKL EKS TI KVS 2F 766 298 117SBKL EKS VI KVS 745 900 117SCH A13 V2A 525 912 127SCH A17 V2A 525 916 127SCS 36 1000 763 610 10SCS 36 1500 763 611 10SCS 36 2000 763 612 10SCS 72 1500 763 615 10SCS 72 2000 763 620 10SCS 36 STK 1000 763 100 10SCS 72 STK 1500 763 150 10

SCS 123 STK 2000 763 180 10SCSN 36 1000 763 510 10SCSN 36 1500 763 511 10SCSN 36 2000 763 512 10SCSN 36 STK 1000 763 111 10SCSN 123 STK 2800 763 181 11SCSS 36 STK 30 766 323 7SCSSN 36 STK 30 766 324 7SDS 1 923 110 111SDS 2 923 117 111SDS 3 923 116 111SDS 4 923 118 111SDS 5 923 119 112SDS KEV MS 785 265 90SE E14 785 639 13SE E18 785 650 13SE E27 E33 785 640 13SE NH0 785 642 13SE NH00 785 641 13SE NH1 785 643 13SE NH2 3 785 644 13SE REG 1TE 785 638 13SE REG 2TE 785 652 13SE REG 3TE 785 637 13SF FRF MS 785 953 85SKL 116 16 10 766 603 117SKL 92 16 10 766 703 117SKL 95 21 10 767 701 117SKL 95 21 10 V2 759 003 117SKS M12X25 V2A 561 925 127SKS M12X30 V2A 561 930 127SKS M12X35 V2A 561 935 127SKS M16X30 V2A 561 931 127SPG DCA IT LRM 767 122 30SPN 500PR 766 544 26SPN 1000PR 766 548 26SRA MS 785 212 85SRA NS 785 515 77SRH 1180 IS 650 MS 785 119 87SRH 1180 MS 785 120 82SRH 400 NS 785 520 75SRV 200 MS 785 121 82SRV 200 NS 785 521 75SRV 300 NS 785 522 75SRV 400 MS 785 122 82SRV 400 NS 785 523 75SRV 800 MS 785 123 82SRW 90 MS 785 131 81SRW 135 MS 785 132 81SRW V MS 785 130 81SRW V NS 785 530 75SSA W D 785 200 85SSC ASH NS 785 427 93SSK 36 STK 560 766 164 131

SSK M12 765 005 10SSK SQ 765 009 10STB 80 MS 785 171 83STB 120 MS 785 170 83STB 80 K MS 785 172 83STB 85 K NS 785 555 77STB 85 Z NS 785 550 77STT 110 15 769 509 120STT 120 30 15 766 704 120STT 180 20 766 039 120STT 55 27 30 785 111 120SZ HH 1060 765 040 11SZ HH 1250 765 041 11SZ HH 1500 765 042 11SZ HH W20 1070 765 050 11SZ HH W20 1250 765 051 11SZ HH W20 1500 765 052 11

TFRS MS 785 950 80TG DCA 767 110 29TRS MS 785 100 78TRS MS V1 785 112 78TRS NS 785 502 75

UEK 25 FS 774 034 47UEK 25 HG 774 234 47UEK 25 SKN 774 434 47UEK 30 FS 774 130 47UEK 30 HG 774 330 47UEK 30 SKN 774 530 47UK 25 SK 773 034 43UK 25 SQ 773 234 43UK 25 SQL 773 236 45UK 30 SK 773 130 43UK 30 SQ 773 330 43UK 30 SQL 773 331 45UK K25 FL30 HG 774 251 49UK K25 FL30 SQL 773 251 49

VH SC APS 785 753 100VL 350 SD KEV MS 785 273 91VL HOEL 20 500 785 398 89VS 500 SPN II 766 542 26VS F&G M22 F 785 281 92VS GOW M12 785 284 92VS KOET M10 785 282 92VS RAY M14 785 283 92

WBN 200 2,5M NS 785 646 95

ZK55 IS 771 230 70ZK55 IS BL 771 231 70ZK85 BS 771 232 70ZK85 BS BL 771 233 70




Inde

x

Notes

This catalogue 2015 replaces the Safety Equipment Short Form Catalogue 2014.

Since we do not plan systems or parts of systems, our product recom-mendations should be regarded as product information and for advisory purposes only. Our oral and written application proposals are based on

accept any liability in this respect. This particularly applies to the differ-ent conditions of use which are beyond our control. We recommend to check whether the respective DEHN product is suitable for the intended application. Application, use and processing of our products are beyond our control. Therefore, the product is completely subject to the user’s re-sponsibility.

Illustrations are not binding.

*) GTIN (EAN code)

The country and DEHN + SÖHNE code (40 13364) must be put in front of this number.

Abbrevations

PG Product Group

PU Packing Unit

VE Sales Unit (Piece, Meter, Set or Pair)

pc(s) Piece

m Meter

Sa Set

Pa Pair

Weight Weight per sales unit

Trademarks

– BLITZPLANER

– DEHNcare

– Colour trademark: “Rot“ 302 40 296.9

and our brand

are protected by German Trademark, by Community Trademark (EU) and/or are registered trademarks in other countries.


Inde

x

Template – Insulating Protective Shutters

Customer:

Customer No.:

Company:

Address:

Address, Country:

Contact:

Phone / fax: E-mail:

Enquiry: Order: Quantity: pc(s) Signature:

1 Switchgear installation:

Type: Rated voltage:

ISP /

2 Remark:

Created / released by: Signature:

Date:

3 Recorded by:

for internal use only, Name:

Date:

Person in charge:

Dept. Name Date Remark

Sales

Purchasing

The protective shutter(s) has/have been delivered to the above mentioned customer on ________________ (date), according to the information stated in the template.This delivery has been subject to random tests in accordance with DIN VDE 0682-552.

Place, Date Stamp / Signature

DEHN form No. 2090/E/0112 (page 1)

acc. to DIN VDE 0682-552

Material: Rigid PVC

DEHN + SÖHNEGmbH + Co.KG.

Hans-Dehn-Str. 1Postfach 164092306 NeumarktGermany

Tel. +49 9181 906-0Fax +49 9181 [email protected]

Technical Support:Tel. +49 9181 906-1510


Inde

x




Material: Rigid PVC

Thickness: Type/Application * Note:

5 mm Type A4 – The protective device of the installation must ensure full protection when inserting and removing insulating protective shutters! 6 mm

__________ mm With 1 bayonet pin for use with an operating stick (A3)

With 2 bayonet pins for use with an operating stick (A3)

Rotatable shutter for use with an operating stick (A3)

With handle ( A2)

Colour: Type / Insertion Note:

red Standard type (can be inserted into guide rails, Part No. 9030) Two persons are required to insert / remove shutter sizes exceeding 1 m2 !

transparent Rotable shutters (by bearing pin guide)

ISP /

Dimensions: A1: 763 211 A2: 763 221 A3: 763 231 A4: 763 241

W mm

L mm

LS mm

H mm

mm

The angle of the handle can beselected from 70° to 290°.

bayonet net

rotatable

W

WW

W

W


Inde

x




Material: Rigid PVC

Nominal voltage lG lI lH lV

insulating stick

switching stick

operating stick

kit

up to 36 kV 1028 mm 525 mm 350 mm 140 mm 766 311

up to 36 kV 1528 mm 525 mm 500 mm 490 mm 766 315

up to 36 kV 1030 mm 525 mm 370 mm 115 mm 763 610

up to 36 kV 1500 mm 525 mm 550 mm 395 mm 763 611

up to 36 kV 2000 mm 525 mm 700 mm 745 mm 763 612

up to 36 kV 525 mm 560 mm 766 452

IS insulating stick – T pin shaftFor rotable shutters with bayonet pin.For use as operating stick.

SCS switching stickFor rotable shutters with longitudinal hole.For use as operating stick.

lV ll lH

lG

lV ll lH

lG

Accessories:

Bayonet pin

Part No.: 9040

Quantity: _____________ pc(s)

Bearing pins

Part No.: 9010

Quantity: _____________ pc(s)

Ball bearing

Part No.: 9041

Quantity: _____________ pc(s)

Bearing pins

Part No.: 9020

Quantity: _____________ pc(s)

Handle

Part No.: 9050

Quantity: _____________ pc(s)

Guide rails

Part No.: 9030

Quantity: _____________ mm

Keyhole

Part No.: 9070

Quantity: _____________ pc(s)

Magnet holder

Part No.: 9060

Quantity: _____________ pc(s)

45° angled swivelling eye

Part No.: 9080

Quantity: _____________ pc(s)

25

35

35

Cellwall

Cellwall


Inde

x

Template – Short-circuiting Bars

DEHN form No. 2150/E/0413

acc. to IEC/EN 61230 (DIN VDE 0683-100)

EaS Configurator:

www.dehn.de/en/euk

Material current: 0.5 s current: 1 sBar

Copper (E-Cu F20) 100 kA 70 kA 60 x 8 mm

Copper (E-Cu F20) 130 kA 90 kA 60 x 12 mm

Aluminium (AlMgSi 0.5) 60 kA 45 kA 60 x 8 mm

Aluminium (AlMgSi 0.5) 100 kA 70 kA 60 x 12 mm

2 Coupling mechanism:

T pin shaft (bayonet) Hexagon shaft

4 Cable length D (50 mm2):

Standard: D = 2500 mm mm

From 250 up to 25000 mmat intervals of 100 mm

Standard:

Type or KKH 20 FS

Part No. 772 312

see easy choice:

Type

or Part No.

6 Accessories (optional):

3x Part No. 795 040

Part No. 795 213

Part No. 795 214

see easy choice: Earthing Stick

Type or

Part No.

3 Dimensions:

Bar spacing SA(in the installation):

Bar width SB(in the installation):

OR

Total length lG: Bar spacing SA(in the installation):

mm mm mm mm









SA 25

SB

50 mm2

lH

lG

Customer:

Customer No.:

Company:

Address:

Address, Country:

Contact:




Inde

x

1 For use with:

Switchgear Installations Overhead Lines

copper cable:

k

1 s

16 mm2 4.5 kA 3.2 kA

25 mm2 7.0 kA 4.9 kA

35 mm2 10.0 kA 6.9 kA

50 mm2 14.0 kA 9.9 kA

70 mm2 19.5 kA 13.8 kA

95 mm2 26.5 kA 18.7 kA

120 mm2 33.5 kA 23.7 kA

150 mm2 42.0 kA 29.6 kA

4 Cable lengths:

A mm From 200 up to 6000 mmat intervals of 50 mm

B mm From 200 up to 6000 mmat intervals of 50 mm

C mm From 200 up to 6000 mmat intervals of 50 mm

D mm From 300 up to 25000 mmat intervals of 50 mm

E mm From 150 up to 6000 mmat intervals of 50 mm

F mm From 200 up to 6000 mmat intervals of 50 mm

G mm From 200 up to 6000 mmat intervals of 50 mm

5 Phase connecting element (see easy choice):

Type orPart No.

6 Earth connecting element (see easy choice):

Type orPart No.

7 Accessories (optional) (see easy choice):

Earthing stickType orPart No.





Template – Portable Earthing and Short-circuiting devices (EaS)

DEHN form No. 2151/E/0413

acc. to IEC/EN 61230 (DIN VDE 0683-100)

EaS Configurator:

www.dehn.de/en/euk

Customer:

Customer No.:

Company:

Address:

Address, Country:

Contact:



1-pole X Same cable cross-section


3-pole Same cable cross-section

Reduced cable cross-section



A

A

C

D

A F

C

GB

DE

A

C

DB

A F

CB

D

E

mm2)


Inde

x

EaS – Easy Choice – Phase side

Design Type Part No. Length lG

Max. load on operat

ing head


Max. load on operat

ing head

ES SK 1000 761 010 1000 mm 35 kg ES SQ 1000 761 011 1000 mm 35 kg

ES SK 1500 761 015 1500 mm 35 kg ES SQ 1500 761 016 1500 mm 35 kg

ES SK STK 1000 761 001 1000 mm 35 kg ES SQ STK 1000 761 002 1000 mm 35 kg



DesignType Part No.

Clamping rangeØ

Collar widthClamping range

Rd / FlClamping range Max. cable

circuit current

circuit current

SK SQ lK 0.5 s lK 1 s

KKH 20 D SK 772 330 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 20 D SQ 772 331 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 20 SK 772 310 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 20 SQ 772 311 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 25 D SK 772 340 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

KKH 25 D SQ 772 341 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

KKH 25 SK 772 320 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

KKH 25 SQ 772 321 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

UK 25 SK 773 034 Ø20/25 mm 15 mm (-95 mm2) 20 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UK 25 SQ 773 234 Ø20/25 mm 15 mm (-95 mm2) 20 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UK 30 SK 773 130 Ø25/30 mm 18 mm (-95 mm2) 30 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UK 30 SQ 773 330 Ø25/30 mm 18 mm (-95 mm2) 30 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

*)

*)


Inde

x

DesignType Part No.

Clamping rangeØ

Collar widthClamping range

Rd / FlClamping range Max. cable

circuit current

circuit current

SQ lK 0.5 s lK 1 s

PSK 4 30 SQL 784 201 — — Ø4-30 mm 16-70 mm2 19.5 kA 13.8 kA


PSK 4 30 SQL EH 784 401 — — Ø4-30 mm 16-70 mm2 19.5 kA 13.8 kA

PSK 10 65 SQL EH 784 501 — — Ø10-65 mm 16-120 mm2 33.5 kA 23.7 kA

PSK FV 4 30 SQL 784 480 — — Ø4-30 mm 16-70 mm2 19.5 kA 13.8 kA



PSK 10 32 SQL SB 784 038 — — Ø10-32 mm 16-95 mm2 18.7 kA 18.7 kA

KKH 20 SQL 772 314 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 25 SQL 772 324 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

UK 25 SQL 773 236 Ø20/25 mm 15 mm (-95 mm2) 20 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UK 30 SQL 773 331 Ø25/30 mm 18 mm (-95 mm2) 30 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

*)


Max. load on operating head

Design Type Part No. LengthlG max/lG min

Max. load on operating head

EST KS SQL 1500Pos.-No. 1

1x 769 503 1500 mm 35 kg ESTC SQL STK 3000 769 300 3000 mm / 1670 mm

18 / 35 kg

Pos. No. 1 + 31x 769 5031x 769 504 3000 mm 30 kg

Pos. No. 1 + 2 + 3

1x 769 5031x 769 5041x 769 505

4500 mm 15 kg ESTC SQL 4000 769 400 4000 mm / 2170 mm

12 / 35 kg

Pos. No. 1 + 2 + 2 + 3

1x 769 5032x 769 5041x 769 505

6000 mm 8 kg ESTC SQL 5000 769 500 5000 mm / 2670 mm

10 / 35 kg

1

2

3

EaS – Easy Choice – Phase side


Inde

x

Earth Connecting Elements:

Design Type Part No.Clamping range

ØCollar width

Clamping rangeRd / Fl

Clamping range Max. cable

circuit current

circuit current

lK 0.5 s lK 1 s

UEK 25 FS 774 034 Ø20/25 mm 15 mm (-95 mm2) 20 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UEK 30 FS 774 130 Ø25/30 mm 18 mm (-95 mm2) 30 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UEK 25 HG 774 234 Ø20/25 mm 15 mm (-95 mm2) 20 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UEK 30 HG 774 330 Ø25/30 mm 18 mm (-95 mm2) 30 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UEK 25 SKN 774 434 Ø20/25 mm 15 mm (-95 mm2) 20 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

UEK 30 SKN 774 530 Ø30 mm 18 mm (-95 mm2) 30 mm (-70 mm2) 16-120 mm2 33.5 kA 23.7 kA

KKH 20 FS 772 312 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 25 FS 772 322 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

KKH 20 HG 772 313 Ø20 mm — — 16-120 mm2 33.5 kA 23.7 kA

KKH 25 HG 772 323 Ø25 mm — — 16-150 mm2 42.0 kA 29.6 kA

Design Type Part No. Dimensions Fl

Clamping range Max. cable

circuit current

circuit current

lK 0.5 s lK 1 s

EAS EK FM 12 775 621 M12 — 16-150 mm2 42.0 kA 29.6 kA

EAS EK FM 16 775 631 M16 — 16-150 mm2 42.0 kA 29.6 kA

EAS EK FS 12 775 626 M12 x 15 mm — 16-150 mm2 42.0 kA 29.6 kA

EAS EK FS 16 775 636 M16 x 15 mm — 16-150 mm2 42.0 kA 29.6 kA

EAB RN 16 FS 790 150 Ø16 mm — 16-150 mm2 42.0 kA 29.6 kA

EAB RN 16 SKN 790 160 Ø16 mm — 16-150 mm2 29.6 kA 29.6 kA

EFK FL40 SKN 792 190 — 40 mm 16-95 mm2 26.5 kA 18.7 kA

EFK FL30 SKN 792 030 — 30 mm 16-50 mm2 14.0 kA 9.9 kA

*)

*)

*)

*)

Fixed ball pointØ

T PinCollar width

Rd / FlClamping range

Max. cable

tion

circuit current

circuit current

lK 0.5 s lK 1 s

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 16 mm2 4.5 kA 3.2 kA

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 25 mm2 7.0 kA 4.9 kA

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 35 mm2 10.0 kA 6.9 kA

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 50 mm2 14.0 kA 9.9 kA

20 / 25 / 30 mm 15 / 18 mm 20 / 30 mm 70 mm2 19.5 kA 13.8 kA

20 / 25 / 30 mm 15 / 18 mm — 95 mm2 26.5 kA 18.7 kA

— / 25 / 30 mm — — 120 mm2 33.5 kA 23.7 kA

— — — 150 mm2 42.0 kA 29.6 kA

EaS – Easy Choice – Earth side


Inde

x

General Terms of Sale*

1. General, Scope1.1 All deliveries and services in business dealings with entre-

preneurs take place exclusively under our general terms of sale (hereinafter “terms of sale”). We oppose deviating reg-

-tomer, unless we expressly agreed to the validity in writing. Our terms of sale apply even if we complete unconditional delivery to the customer while knowing that the terms of

1.2 Our terms of sale only apply to entrepreneurs within the meaning of section 310, paragraph 1 of the German Civil Code (BGB), to current business relationships and to all fu-ture transactions with the customer.

and Copyright-

ments such as diagrams, drawings and measurements, in particular in print media and online on our website www.dehn-international.com, are only indicative.

-

order, then the customer’s agreement is implied, if he/she does not immediately, at the latest however within 3 busi-

2.3 Any order placed in our web shop shall be regarded as an offer to conclude a sales contract. A sales contract only comes into existence if the customer receives a written or-

rendered.2.4 Our goods are only delivered in the packaging units indi-

cated in the catalogues. If a different number of items is ordered, the amount and price of the next larger packaging unit is considered agreed upon.

progress or are unavoidable based on other circumstances and are reasonable for the customer.

2.6 We reserve ownership and copyright rights to diagrams, drawings, calculations, and other documents; these may not be made available to third parties without our express written consent.

3.1 Our prices are subject to change without notice.3.2 Prices include, insofar as nothing else is arranged, custom-

ary packaging from our plant without value-added tax. On

be reimbursed to us.3.3 The cost of non-customary packaging, e.g., collective or

seaworthy packaging, is invoiced separately. The customer bears the cost of the disposal or return of packaging.

The risk of accidental loss and deterioration passes to the customer upon dispatch to the customer from our ware-house or plant, even if carriage-paid delivery is agreed upon. At the request and expense of the customer, we will insure the delivery against breakage, damage to goods in

5.1 Unless otherwise agreed, invoices are payable net 10 days. The customer shall pay the costs of payment. Discount amounts are deductible only if they have been agreed on with us and all accounts payable due have been paid.

5.2 If the customer is in default with his payments, interest on the outstanding amount shall be payable at the rate of 8 % above the base interest rate. We reserve the right to prove and allege higher default damages. The right of early notice of default remains unchanged. If we are required to advance performance and, if after the execution of the contract, it becomes apparent that our claim, in particular for payment, may be jeopardised by the customer’s inability to perform, we may refuse performance.

5.3 The customer cannot charge counter-claims against our due payment claims or exercise a right of retention, unless the customer is entitled to a claim recognised by declaratory judgement that is not contested by us and if, while exercis-ing the right of retention, the counter-claim from the cus-tomer is based on the same contractual relationship.

5.4 Orders, with the exception of cash sales, for which the net amount (invoiced amount without shipping costs and val-ue-added tax) is less than € 75.00, a small order surcharge of € 25.00 will be charged.

6.1 Delivered goods remain our property until the payment of all open business claims up to the point of invoicing. The claims of the customer including value-added tax from the resale of reserved goods, i.e., from a work performance us-ing our goods, should already be transferred to us in the amount of the open invoice. In the case that the reserved goods from the customer are sold together with other

goods that do not belong to us, whether it be without or after processing, or are delivered within the framework of a working contract, the assignment of the resulting claim of the reserve buyer is calculated in the amount of the value of the reserved goods.

6.2 Should the value of the granted securities exceed the claims by more than 10 %, we are obliged to retransfer or release the securities upon request. We shall select the securities to be released.

6.3 Our goods may only be transferred within the framework of proper business activity. The customer is not allowed to pawn or transfer the ownership of goods that are still in our possession.

6.4 At our request, the customer is obliged to inform us of the purchaser and the arranged price and to show the assign-ment to its debtor.

7. Delivery Period and Date7.1 The start of the delivery period presupposes the involve-

questions.7.2 Delivery periods as well as delivery dates will be appropri-

ately extended if they cannot be adhered to as a result of military mobilisation, war, uprising, strike or lockout, de-layed delivery of raw and auxiliary materials, late delivery by our suppliers, or similar circumstances beyond our con-trol. A lasting obstruction under these circumstances gives us the right to withdraw from the contract without liability for damages.

8.1 We shall assume liability without restriction in compliance with the statutory regulations, provided that the customer asserts claims for damage compensation, which are attrib-utable to wilful intent or gross negligence, including wilful intent and gross negligence on the part of our representa-tives or vicarious agents.

8.2 We shall assume liability without restriction in compliance with the statutory regulations, in case of culpable injury to life, limb or health; this shall also apply to the mandatory liability under the Product Liability Act.

8.3 In so far as a defect of the subject of the contract exists for which we are liable, we shall at our discretion either remedy the defect or deliver a non-defective object of the contract (subsequent performance).

8.4 If said subsequent performance should fail or if it is un-reasonable for the customer, or if we refuse seriously and

unreasonably or if other circumstances prevail, which justify immediate withdrawal or damage compensation, taking account of the interests on both sides, then the customer shall be entitled to reduce the contract price or to withdraw from the contract and/or to demand damage compensation. In the event of only a slight infringement of contract, in par-ticular in the event of only slight defects, the customer shall not be entitled to withdrawal.

8.5 If the customer should choose only damage compensation after the failure of subsequent performance, then the sub-ject of the contract shall remain with the customer, if this can be reasonably expected. Damage compensation shall be restricted - subject to item 8.1 and 8.2 - to the difference between the purchase price (without value added tax) and the value of the defective subject of the contract remaining with the purchaser.

excluded.8.7 The limitation period for claims based on defects, - subject

to item 8.1 and 8.2 - shall be 12 months from delivery of the goods.

8.8 Items 8.1 to 8.7 shall not affect the rights of the customer, if we have fraudulently concealed a defect or have assumed a guarantee for quality.

9.1 Any further liability for compensation than that provided in item 8 - irrespective of the legal nature of the asserted claim - shall be excluded. This shall in particular apply to damage claims for liabilities resulting from culpa in contrahendo, for other breaches of duty or for tortious claims for damage compensation acc. to § 823 BGB (German code civil law).

9.2 Limitation according to 9.1 shall also apply, insofar as the customer claims reimbursement for useless expenditures instead of claiming compensation for damages in place of performance.

9.3 As far as the liability for compensation against us is ex-cluded or restricted, this shall also apply with regard to the personal liability for damages of our employees, workers, representatives and vicarious agents.

10.1 If no legal claim to return exists, delivered goods will be ac-cepted only with previous agreement from us. Returns with-out previous agreement will be send back – postage-due – to the sender without inspection. The customer bears the shipping costs for the return delivery in No. 10.1.

10.2 The goods must still be in the original packaging. Special orders or deliveries dating back further than three months cannot be returned. In order to cover the costs of goods returns, a processing fee of 20 % of the net value of the goods or € 25.00, whichever is the greater, shall be applied, unless the customer can prove to us that we have incurred no or considerably smaller damage. If the goods can no longer be resold at the list price at the time of the return, an additional deduction (old goods deduction) will be made in addition to the processing fee. If we make an exception and agree to accept the return of parts that are unpackaged or that are no longer in their original packaging, an expense remuneration of at least 15 % will be charged for reworking and repackaging in addition to the processing fee and, if applicable, the old goods deduction, unless the customer can prove to us that we have incurred no or considerably smaller damage.

10.3 Returned goods will only be credited to a new invoice. Cred-its cannot be used to clear invoices due at the time of the return.

Our deliveries are intended only for speciality stores or skilled users. Our user information and instructions are limited to the details of each written product information (e.g., installation instructions, catalogues, data sheets). Fur-ther advisory obligations do not exist. Application, use, and processing of the products lie solely in the customer’s realm of responsibility.

12.1 We make our offers without conducting a separate test to ascertain the suitability of the products for the relevant customer project. Our liability is excluded unless we were aware of anything contrary to suitability or we were not so aware due to gross negligence. The customer is responsible for conducting the requisite test.

submitted by the customer without conducting a separate test to ascertain the suitability of the products on an individ-ual basis. Our liability is excluded unless we were aware of anything contrary to suitability or we were not so aware due

customer is responsible for conducting the requisite test.12.3 Our application proposals with product recommendations

are of a general nature and are neither designed for applica-tion to an individual case nor intended to enable such appli-cation. Our application proposals are therefore non-binding. We do not accept any liability in this respect. It is absolutely essential to conduct an appropriate test on an individual ba-sis. The customer is responsible for conducting such a test.

12.4 Our concept proposals with product recommendations do not replace the prevailing recognised engineering stand-ards. The concept proposals with product recommendations do not claim to be exhaustive, unless expressly agreed oth-erwise. We do not plan systems or parts thereof. In particu-lar, our concept proposals with product recommendations

customer’s realm of responsibility. We do not accept any liability in this respect.

12.5 The sole purpose of the seminars we organise for the cus-tomer is to broaden his knowledge and to enable him to check his level of knowledge. We do not monitor and test the knowledge that the customer acquires and applies. We do not accept any liability in this respect. The seminars will always be kept up to date so that they meet the require-ments of the recognised engineering standards.

We use customer data, which concern the business dealings with the customer, in terms of the Federal Data Protection Act.

14. Applicable Law, Jurisdiction14.1 German law applies to the mutual contractual obligations,

their materialisation, interpretation, and implementation as well as all resulting contractual and business relationships. The application of the UN Agreement on Contracts on the International Purchase of Goods and the thereafter enacted laws of the Federal Republic of Germany is excluded.

14.2 Place of performance and jurisdiction for delivery, payment, and for all obligations, including those from exchange and cheque payments – if the customer is a businessperson, le-gal entity of public law or of special fund under public law – is exclusively Nuremberg.

VAT ID No. DE 133251475

DEHN + SÖHNE GmbH + Co.KG. Nürnberg – Neumarkt

Update March 2015


Inde

x

Key Words

Accessory for NS and MS Cleaning Kits 86Adapter 125 / 134

ASP Distance Voltage Detector 23

Ball Head Cap 42, 45, 48Barriers and Accessories 113Battery 128

Canvas Bag 120Clamp for Railway Tracks 49TFRS MS Combined Cleaning Kit 80Conductor Clamp 46Covering Material and Insulating Mats 94

DEHNcap/A Voltage Indicator 29DEHNcap HR-LRM Test Set 31DEHNcap/IT Interface Test Unit 30DEHNcap/P Voltage Indicator 29DEHNcap/PC-LRM Phase Comparator 30DEHNcap Test Adapter / Measuring Impedance 31DEHNcare® APG – Protective Gloves 97DEHNcare® APJ, APT and APC – Protective Suit

and Coat 98DEHNcare® ESH and APS – Safety Helmet 100DEHN – Information 4DEHN – worldwide 3

Easy Choice – Storage Bags and Transport Cases 121

Earth Clamp for Overhead Contact Lines 46Earth Connecting Plates 36Earth Connecting Elements for Railway

Applications 49Earth Connecting Elements for Switchgear

Installations and Overhead Lines 47Earth Spike 47Earthing and Short-Circuiting Cables,

unequipped 38Earthing and Short-Circuiting Devices 53Earthing and Short-Circuiting Devices for

Crane Conductor Bars 70Earthing and Short-Circuiting Devices for

Railway Applications 60Earthing and Short-Circuiting Device for

Street Lighting Systems 71Earthing and Short-Circuiting Devices

(partly insulated) for Low-Voltage Cable Distribution Cabinets 66

Earthing and Short-Circuiting Devices (fully insulated) for Low-Voltage Cable Distribution Cabinets 64

Earthing Handle for Low-Voltage Installations 72Earthing Kit 46Earthing Sticks for Overhead Lines 51Earthing Sticks for Railway Applications 52Earthing Sticks for Switchgear Installations 50EaS – Easy Choice – Earth Connecting

Elements 158EaS – Easy Choice – Phase Connecting

Elements and Earthing Sticks 156Electrodes 123End Fittings 125

Extensions 135

Field Sensor 131Fixed Arc Fault Protection System DEHNshort 101Fixed Ball Points 33Fixed Earthing Points 35Fixed Phase Points 37FRS ZK MS Damp Cleaning Kit 79

General Terms of Sale 159

Hand Oiler for Switchgear Installations 90Handle 135HSA 194 Non-Contact Voltage Detector 24HSA 205 High-Voltage Indicator 24

Ice Removal Rod 12Indicators 129Indicators with Test Prod 129Installation Devices 127Insulating Elements 134Insulating Equipment for

Airport Lighting Systems 94Insulating Gloves 93Insulating Protective Shutters 73Insulating Stick Kit for Cleaning the Windscreens

of Electric Locomotives 88Insulating Sticks 132IS Insulating Sticks 8IS STK Insulating Stick Kit 7IW Insulated Platform 94

Kits for Railway Application 56

Light Sensor Supports and Support Rails for DEHNarc 105

Lock-out Systems 13

Maintenance Test for Safety Devices 107

Mobile Arc Fault Protection System DEHNarc 103MS Screw Driver Kit 90

NH Fuse Puller with Sleeve 93Notes 150

Operating Heads 131

Periodic inspection of safety devices at DEHN 107Phase Connecting Elements for Overhead Lines 43Phase Connecting Elements for Railway

Applications 46Phase Connecting Elements for Switchgear

Installations 42Phase Screw Clamp 43-44PHE III Voltage Detector 15PHE III Voltage Detector Kit 18PHE III ZK Indicator with Test Prod 17PHE Voltage Detector 21PHE Voltage Detector Kit 22PHE/G d.c. Voltage Detector 25PHG II Voltage Detector 24Plastic Bag / Rucksack 120Plastic Case 117Pneumatic Glove Tester 93PPE – Personal Protective Equipment 93

RST Rescue Rods 12

SCS Switching Sticks 10Service 107Sheet Metal Case 117Short-Circuiting Bar 63Single-pole Earthing and Discharge Devices 115Single-pole PHV I Phase Comparator 28Special Screw Plugs 92Storage Devices 126SZ Fuse Tongs 11

Template for – Insulating Protective Shutters 151 – Portable Earthing and Short-circuiting

Devices 155 – Short-circuiting Bars 154Test Probes 124Test Prods 124 / 129Test Unit for DEHNcap/P 29TRS MS Dry Cleaning Kit and Single Parts 78TRS NS Dry Cleaning Kit and Single Parts 75Two-pole PHV Phase Comparator 27Two-pole SPN Voltage Detector 26

Universal Clamp 43, 45, 47, 49

Voltage Limiters 111

Work according to the 5 Safety Rules 6

Product Page Product Page Product Page

“ We are a reliable partner for our customers and employees.“

Dr. Philipp Dehn Managing Partner

Our Promise – DEHN protects.Our family-owned company specialises in surge protection, lightning protection and safety equipment. Therefore, we are doing the utmost to protect lives and assets. Our pionee-

105 years and made us a market leader with more than 1,600 employees. Our market insight, determination and ideas are

As early as in 1923, our founder Hans Dehn started to produce external lightning protection and earthing components to optimise protection of buildings and installations. In 1954, we

Constant further development of these devices ensures safe operation and permanent availability of electrical and electro-nic installations. Also during the 1950s, our third sector, safety equipment, was added to our portfolio.

The Bavarian town of Neumarkt in der Oberpfalz is the heart of our activities where product managers and developers advance our protection technologies. Here we manufacture our high-quality safety products.

Fair partnership for the best solutionOur goal is to be a reliable and fair partner for our industrial, commercial and technical customers all over the world. To this end, we always focus on the best protection solution.

Our sales teams in Germany, our global network of 18 subsi-

partners ensure competent and customer-oriented marketing of our products. Proximity and close contact to our customers is of utmost importance to us, be it on-site support by our experienced team, our telephone hotline or personal contact at trade fairs. In hundreds of seminar, workshops, trainings and conferences held every year throughout the world, we impart practical knowledge on our products and solutions based on

-disation. Our “Lightning Protection Guide” and brochures will broaden your practical knowledge.

DEHN stands for innovation, top quality and consistent custo-mer and market orientation – also in the future.

“ First and foremost, our innova-

Dr. Peter Zahlmann Managing Director

“ We put our customers in the focus of our activities.“

Helmut Pusch Managing Director

Short Form Catalogue valid as of January 1, 2015Short Form Catalogue Safety Equipment Valid as of...

Documents

Transcript of Short Form Catalogue valid as of January 1, 2015Short Form Catalogue Safety Equipment Valid as of...