Circontrol Short Form Catalogue

It’s my pleasure to present you with the rate-catalogue 2012/2013.Circontrol is now 15 years old!!

These have been years with different challenges, changing because of our own situation and the market.We are a spanish manufacturer who, as time passes, continues to promote innovation, internationaliza-tion, quality and customer proximity.

In 2012/2013 we’re offering a world of new products in each of our product ranges:

CirPark (Ef� cient solutions for car park mobility)CirCarLife (Intelligent recharging solutions for electric vehicles)CirFire (Fire and gas detection)CirAccess (Access and presence control systems)CirView (IP video monitoring, CCTV and smart video analysis)

Here at Circontrol we are attracted to challenges and motivated by our goals. Therefore, our professional team works every day with enthusiasm and interest to offer our customers and friends the best solutions for ef� ciency in parking mobility, security, and � re and gas detection.We hope that the products and solutions re� ected in this catalogue are of interest to you and will help you with projects.

Thanks for counting on us,

Joan HinojoGeneral Manager

3

Dear customer and friend,

44

Short Form Catalogue

2012-2013

5

Short Form Catalogue 2012 - 2013

Index

CirParkTotal ef� ciency on car park solutions

Pag. 6

Pag. 40

Pag. 60

Pag. 90

Security Division

CirCarLifeIntelligent recharging solutions for electric vehicles

CirFireFire and gas detection

CirAccessAccess and time & attendance control systems

Mobility Division

CirViewVideo surveillance systems

Pag. 130

CirP

ark

7


The word ef� ciency comes from the Latin ”ef� cientia”, which means, action, strength, production. It is de� ned as the capacity to have something or someone to bring about a given result.Ef� ciency is the capacity to achieve the desired result with the minimum possible number of resources.

CIRCONTROL has developed various Global Ef� ciency Solutions with the goal of providing operators with the tools they require to achieve optimum EFFICIENCY AND SAVINGS in their car park facilities.

CIRCONTROL solutions enable operators to maximise their pro� ts from the operation of the car park, while increasing customer loyalty and improving their reputation, since they have the facilities with the highest added value in the market.To achieve GLOBAL EFFICIENCY, CIRCONTROL has the following tools:s:

• INTELLIGENT PARKING SPACE GUIDANCE AND OCCUPATION SYSTEM: I-PARK • LED INTELLIGENT LIGHTING SYSTEM: LED-PARK • SYSTEM FOR ENERGY EFFICIENCY AND CAR PARK AUTOMATION: GREEN-PARK • NUMBER PLATE RECOGNITION SYSTEM: LPR-PARK • INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRIC VEHICLES: CIRCARLIFE

CirP

ark

8

CirPark - SHORT FORM CATALOGUE 2012-2013

INDEX

P TOTAL EFFICIENCY ON CAR PARK SOLUTIONS

P1. INTELLIGENT PARKING GUIDANCE SYSTEM: I-PARK 11

P1.1 Detection equipment: Free parking space system 11

P1.1.1 Ultrasound parking space detection sensors 11

P1.1.2 Optical parking space detection sensors 12

P1.1.3 Magnetic parking space detection sensors 12

P1.1.4 Indicator lights 12

P1.1.5 Attachment accessory 13

P1.2 Capacity counting and control equipment 15

P1.3 Information panels 16

P1.3.1 Basic interior range 16

P1.3.2 Advanced interior range 17

P1.3.3 Exterior range 18

P1.4 Control equipment: I-PARK 20

P2. INTELLIGENT LED LIGHTING SYSTEM: LED-PARK 21

P2.1 Lighting modules 21

P2.2 Control equipment: LED-PARK 22

P3. SYSTEM FOR ENERGY EFFICIENCY AND CAR PARK AUTOMATION: POWER-PARK 24

P3.1 Energy ef� cient parking 25

P3.2 Automation equipment 25

P3.3 Intelligent management ventilation system 26

P.3.3.1 CO detection control panels 26

New

New

CirP

ark

9

INDEX

P TOTAL EFFICIENCY ON CAR PARK SOLUTIONS

P.3.3.2 CO detectors CirFire 26

P.3.3.3 CO system accessories 27

P.3.3.4 Frecuency converter CirFire 27

P4. CONTROL ELEMENTS AND MANAGEMENT SOFTWARE 28

P4.1 Control equipment 28

P4.2 Management software 29

P4.2.1 Management software: CIRPARK 29

P4.2.2 Capacity control software: CIRPARK-LT 29

P4.3 Training and start-up 30

P5. INSTALLATION ACCESSORIES 31

P5.1 Parking space-parking space system wiring 31

P5.2 LED lighting cabling system 32

P5.3 Attachment elements 32

P6. LICENSE-PLATE RECOGNITION SYSTEM: LPR-PARK 35

P6.1 LPR equipment 36

P6.1.1 Access control & parking solutions 36

P6.2 Accessories 37

P7. INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRIC VEHICLES: CirCarLife 38

CirP

ark

10


CirP

ark

10

“Plug and play” halogen-free wiring

Indicator light

Indicator light

Free parking space

Free parking spacedisabled

Indicator light

Occupied parking space

Parking space detection

sensor

Access controlvia number plate reading

LED-PARKLED Car park lighting

CirCarLife

Intelligent electrical vehicle recharging system

Information panels

Flow detectors

Control equipment

CirPark Scada software

LED-PARKLED Car park lighting lighting

SOneOptical sensor

SM-U / SM-F Magnetic sensor


11

CirP

ark

11

P1.1.1 PARKING SPACE DETECTION SENSORS

SP3 460127Ultrasound sensor for detecting the occupation of parking spaces in car parks. Input power: 24 V DC. Consumption: 0.8 W. Communication: RS-485. Power supply & data con-nectors and external illuminated indicator. Extended temperature range: -10ºC to +50ºC. Remove firmware configuration. Detection distance and brightness intensity adjustable by software. Recommended installation height: 2.30 to 3.5 metres.

SP3-RG 460128Ultrasound sensor for detecting the occupation of parking spaces in car parks. Input power: 24 V DC. Consumption: 1.2 W. Communication: RS-485. Power supply & data con-nectors and external illuminated indicator. Red-green occupation status LEDs (2000 mcd). Extended temperature range: -10ºC to +50ºC. Firmware can be configured remotely. De-tection distance and brightness intensity adjustable by software. Recommended installation height: 2.30 to 3.5 metres.

SP3-RB 460129Ultrasound sensor used for detecting the occupation of parking spaces adapted for the disabled in car parks. Input power: 24 V DC. Consumption: 1.2 W. Communication: RS-485. Power supply & data connectors and external illuminated indicator. Red-blue oc-cupation status LEDs (2000 mcd). Extended temperature range: -10ºC to +50ºC. Firmware can be configured remotely. Detection distance and brightness intensity adjustable by soft-ware. Recommended installation height: 2.30 to 3.5 metres.

P1.1. DETECTION EQUIPMENT: FREE PARKING SPACE SYSTEMTYPE CODE DESCRIPTION

P1. INTELLIGENT PARKING GUIDANCE SYSTEM: I-PARK

Our modern society is increasingly � lled with shopping malls, large entertainment centres, large transport hubs, etc., leading to exponen-tial growth in road traf� c concentrations. The design of solutions to ef� ciently manage these situations has become a priority. In particular, the car park sector has brought about the need to manage and optimise the resources available, adopting different solutions that offer a series of advantages to the end user and can have a direct im-pact on improving car park operations.

The simplicity of � nding spaces will result in greater customer satisfac-tion, who will then reuse the service given the advantages it offers. The guidance system makes it easier for users to � nd a free parking space in the car park.

One of these solutions is the Parking Space Mana-gement System, which quickly and ef� ciently pro-vides information to the user, who is able to � nd a parking space within the shortest possible time. With this system, car parks can become more easily accessible for their users.

The following objectives can be achieved with the guiding system:

• Increased customer loyalty, providing information about free parking spaces and guiding them to these spaces in the shortest possible time, thus improving quality of service in a car park with highly restrictive driving conditions.

• Shorter trips reduce contamination and the use of ventilation systems, which enables energy savings.

• The Operator receives information about the presence of ve-hicles, help with lost tickets, occupation statistics. All in all, the Operator has access to tools that can increase the effi ciency of the operation while optimising parking space occupation.

• Automatic zone occupation, with 100% optimisation of car park resources and facilities, reducing the consumption costs of the various car park systems. The facilities are only lit when nee-ded, so that their consumption is reduced to the bare minimum.

• Write-off studies concerning the investment in the CIRPARK system, in line with optimum management of the car park’s re-sources.

CirP

ark

12


CirP

ark

12

P1.1.2 OPTICAL PARKING SPACE DETECTION SENSORS

SOne 460270 Optical Sensor for detecting the state of occupation of spaces for parking. Power: 48 - 24 Vdc. Consumption: 1 W. Communications: RS-485. Connectors for Power-Data. It has high brightness RGB LEDs for status indication of occupation. Extended temperature range -10 to 50 º C. Remotely configurable firmware. Distance detection and adjustable brightness software. Recommended installation height between 2.30 and 3.5 meters.

P1.1.3 MAGNETIC PARKING SPACE DETECTION SENSORS

SM-U 460271 Magnetic Field Sensor Built for detecting the state of occupation of places. Power: Internal Battery 2 to 7.2 Vdc. Consumption Max: 4 W. 868MHz RF Communications. Exten-ded temperature range -10 to 50 º C. Remotely configurable firmware. IP67. Life 7-10 years. Built on the asphalt. Do not allow battery change.

SM-F 460272 Surface Sensor Magnetic Field for detecting the state of occupation of places. Power: Internal Battery 2 to 7.2 Vdc. Consumption Max: 4 W. 868MHz RF Communications. Exten-ded temperature range -10 to 50 º C. Remotely configurable firmware. IP67. Useful Life 5 years. Allows battery change

P1.1.4 INDICATOR LIGHTS

PP1-RG 460131 Parking space occupation status indicator, visible from 360º, red-green colour (2000 mcd). Input power: 24 V DC. Consumption: 0.7 W. Brightness intensity adjustable via the ultrasound sensor.

PP1-RB 460132 Occupation status indicator for disabled parking spaces, visible from 360º, red-blue colour (2000 mcd). Input power: 24 V DC. Consumption: 0.7 W. Brightness intensity adjus-table via the ultrasound sensor.

PP2-RG PG 460136 Parking space occupation status indicator, visible in one direction only, red-green colour (6000 mcd). Input power: 24 V DC. Consumption: 0.7 W. Brightness intensity adjus-table via the ultrasound sensor.

PP2-RB 460108 Occupation status indicator of disabled parking spaces, visible in one direction only, red-blue colour (6000 mcd). Input power: 24 V DC. Consumption: 0.7 W. Brightness inten-sity adjustable via the ultrasound sensor.

New

New

New

CirP

ark

13

TYPE CODE DESCRIPTION

P1.1.5 ATTACHMENT ACCESSORY

PK-CLIP 460160 Grooved clip used to attach the sensor and light indicators, for metal rails and for sen-sor sockets. Bag of 100 units.

PP3-RG 460118 Parking space occupation status indicator, visible in two-directions, red-green colour (8000 mcd). Input power: 24 V DC. Consumption: 0.8 W. Brightness intensity adjustable via the ultrasound sensor.

PP3-RB 460119 Occupation status indicator of disabled parking spaces, visible in two-directions, red-blue colour (8000 mcd). Input power: 24 V DC. Consumption: 0.8 W. Brightness intensity adjustable via the ultrasound sensor.

PP3-TB-RG 460228 Parking space occupation status Pipe indicator, visible in two-directions, red-green colour (8000 mcd). Input power: 24 V DC. Consumption: 0.8 W. Brightness intensity adjus-table via the ultrasound sensor.

PP3-TB-RB 460229 Occupation status Pipe indicator of disabled parking spaces, visible in two-direc-tions, red-blue colour (8000 mcd). Input power: 24 V DC. Consumption: 0.8 W. Brightness intensity adjustable via the ultrasound sensor.

PP2-TB-RG 460230 Parking space occupation status Pipe indicator, visible in One-direction, red-green colour (8000 mcd). Input power: 24 V DC. Consumption: 0.8 W. Brightness intensity adjus-table via the ultrasound sensor.

PP2-TB-RB 460231 Occupation status Pipe indicator of disabled parking spaces, visible in One-direc-tions, red-blue colour (8000 mcd). Input power: 24 V DC. Consumption: 0.8 W. Brightness intensity adjustable via the ultrasound sensor.

PP-M 460221 Multi-indicator equipment. Can mark two or three parking spaces with a single light indica-tor, receiving the signal from two or three ultrasound sensors. 24 V DC input power.

PP3-TB-RBPP3-TB-RBPP3-TB-RB

PP2-TB-RB

PP2-TB-RG

CirP

ark

14

CirP

ark

15

P1.2 CAPACITY COUNTING AND CONTROL EQUIPMENT

CDU-TCP-PARK 460233 Signal concentrator, with information management and storage capacity, via the equipment control system over the RS485 bus. Four digital inputs and four relay outputs. 10BaseT/100BaseTX Ethernet port. Input power: 230 V AC.

MR4/dp MR4/dp 460111 Flow detector control unit. Input power: 24 V DC. Consumption: 1 W + (No. zones x 1.6 W). Control of four flows and four relay outputs, activated according to occupation. Counter storage memory.

DPF 460114 Vehicle flow detector using infrared photocells. Set of two modules with two photocells each (transmitter-receiver). Input power: 24 V DC. Activation by digital input in MR4/dp.

DPF-M 460251 Vehicle flow detector using infrared photocells with mirror. Set of two modules with one photocell and one mirror. Input power: 24 V DC. Activation by digital input in MR4/dp. Range: 12 m.

DPU 460133 Ultrasound vehicle flow detector. Set of two ultrasound sensors. 24 V DC input power. Consumption: 2 x 0.8 W. Communication: RS-485 with MR4/dp. Socket for installation in tube included.

DLI 140022 Inductive loop detector. Input power: 230 Vac. Consumption: 1.5 VA. Control with one inductive loop. Activates a relay when a detecting a metal mass on the loop. Possibility of adjusting the sensitivity. Adjustable pulse type, during or after detection.

DLI-24 460219 Inductive loop detector. Input power: 24 V DC. Consumption: 1.5 VA. Control with one inductive loop. Activates a relay when a detecting a metal mass on the loop. Possibility of adjusting the sensitivity. Adjustable pulse type, during or after detection.

DLI-PARK 460180 Inductive loop detector. Input power: 230 Vac. Consumption: 1.5 VA. Control of two inductive loops. Activates a relay when detecting a metal mass on the loop. Possibility of adjusting the sensitivity. Adjustable pulse type, during or after detection.

DLI-PARK-24 460220 Inductive loop detector. Input power: 24 V DC. Consumption: 1.5 VA. Control of two inductive loops. Activates a relay when detecting a metal mass on the loop. Possibility of adjusting the sensitivity. Adjustable pulse type, during or after detection.

LC-720 460503 Infrared detector, 90º wall, 1000 W load, 12 m, for pedestrian detection and intelligent management of lighting systems. Input power: 220 V AC.

DLI


CirP

ark

16

P1.3.1 BASIC INTERIOR RANGE

DX3-LI 460226 Three-digit display, indicating free parking spaces. Input power: 24 V DC. Consumption: 2.7 W. Communication: RS-485. Digit colour: amber. Brightness intensity adjustable by software. Digit height: 80 mm.

D4 460153 Four-digit display, indicating free parking spaces. Input power: 24 V DC. Consumption: 3 W. Communication: RS-485. Digit colour: amber. Brightness intensity adjustable by soft-ware. Digit height: 80 mm.

DX3 DI 460110 Three-digit display + left/right green arrows and red cross/arrows, indicating free par-king spaces and direction. Input power:24 V DC. Consumption: 2.5 W. Communication: RS-485. Digit colour: amber. Brightness intensity adjustable by software. Digit height: 80 mm.

DX3 AA 460112 Three-digit display + up/down green arrows and red cross/arrows, indicating free par-king spaces and direction. Input power:24 V DC. Consumption: 2.5 W. Communication: RS-485. Digit colour: amber. Brightness intensity adjustable by software. Digit height: 80 mm.

DX2 DI 460124 Two-digit display + left/right green arrows and red cross/arrows, indicating free par-king spaces and direction. Input power:24 V DC. Consumption: 2 W. Communication: RS-485. Digit colour: amber. Brightness intensity adjustable by software. Digit height: 80 mm.

DX2 AA 460125 Two-digit display + up/down green arrows and red cross/arrows, indicating free par-king spaces and direction. Input power:24 V DC. Consumption: 2 W. Communication: RS-485. Digit colour: amber. Brightness intensity adjustable by software. Digit height: 80 mm.

DX-F DI 460155 One left/right arrow display, indicating direction. Input power: 24 V DC. Consumption: 0.5 W. Communication: RS-485. Arrow colour: green. Cross/arrow colour: red. Brightness intensity adjustable by software. Arrow height: 80 mm.

DX-FF 460154 Two left/right arrow display, indicating direction. Input power: 24 V DC. Consumption: 1 W. Communication: RS-485. Arrow colour: green. Cross/arrow colour: red. Brightness intensity adjustable by software. Arrow height: 80 mm.

P1.3 INFORMATION PANELS

DX3-LI

D4


CirP

ark

17


DX2-VMS 460235 Display - two-colour - alphanumerical - two digits + up/down/left/right arrow and cross, indicating free parking spaces and direction. Input power: 24 V DC. Consumption: 4.3 W. Communication: RS-485. Brightness intensity adjustable by software. Digit height: 120 mm. Indoor installation.

DX3-VMS-6 460236 Display - two-colour - alphanumerical - three digits + up/down/left/right arrow and cross, indicating free parking spaces and direction. Display with up to six characters. Input power: 24 V DC. Consumption: 5.8 W. Communication: RS-485. Brightness intensity adjustable by software. Digit height: 120 mm. Indoor installation.

DX4-VMS-8 460237 Display - two-colour - alphanumerical - four digits + up/down/left/right arrow and cross, indicating free parking spaces and direction. Display with up to eight characters. Input power: 24 V DC. Consumption: 6.7 W. Communication: RS-485. Brightness intensity adjustable by software. Digit height: 120 mm. Indoor installation.

DX-VMS-P 460238 RGB matrix display - three-colour - image customisation. Text by software, scrolling text. Displays up to 15 characters (P + 3 digits). Input power: 24 V DC. Consumption: 22 W. Communication: RS-485. Brightness intensity adjustable by software. Digit height: 120 mm. Indoor installation.

DX-VMS-F 460239 RGB matrix display - three-colour - image customisation. Text by software, scrolling text. Display with up to 15 characters (P + 3 digits + up/down/left/right arrow and cross), indicating free parking spaces and direction. Input power: 24 V DC. Consumption: 24 W. Communication: RS-485. Brightness intensity adjustable by software. Digit height: 120 mm. Indoor installation.

DX-CA 460240 Cross & arrow display, indicating the direction to free parking spaces. Input power: 24 V DC. Consumption: 2.5 W. Communication:RS-485. Arrow colour: green-red. Brightness intensity adjustable by software. Arrow height: 120 mm.

DX-MINUS 460141 Panel with backlit text information, DISABLED PARKING SPACE, indicating the free parking spaces (Two-digit) and direction to free parking spaces. Digit colour: Amber. Blue arrow. Cross/arrow colour: red. 24 V DC input power. Consumption: 2.5 W. Digit height: 80 mm.

DX-CCL 460290 Panel with backlit text information, SPACES FOR CHARGING ELECTRIC VEHICLES, indicating the free parking spaces (Two-digit) and direction to free parking spaces. Digit colour: Amber. Blue arrow. Cross/arrow colour: red. 24 V DC input power. Consumption: 2.5 W. Digit height: 80 mm.

P1.3.2 ADVANCED INTERIOR RANGE

All Information Panels Basic Gamma can be purchased from OEM Integrator Model Type or without enclosure panels of information integration. For any OEM Model, View Price and Delivery Time.

D-TEXT 460213 Panel with backlit text information, FULL , PLEASE CONTINUE - CONTINUE TO FLOOR X, etc. 24 V DC input power. Consumption: 2 W. Control via MR4/dp contact.

D-TEXT

CirP

ark

18


Panel Parking 460187 Panel with information about the capacity of the car park, per floor or overall. 2-3-4 digit displays. Input power: 24 V DC. Consumption: 2.5 - 4 W per panel. Communication: RS-485. Digit colour: amber - red. Brightness intensity adjustable by software.

D2-0D.11 460245 Outdoor panel, indicating the number of parking spaces available, two digits, high-luminosity red LED. Digit height: 110 mm. Dimensions: 335mm x 209mm x 70mm. Con-sumption: 10W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.

D3-OD.11 460145 Outdoor panel, indicating the number of parking spaces available, three digits, high-luminosity red LED. Digit height: 110 mm. Dimensions: 335mm x 209mm x 70mm. Con-sumption: 15W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.

D4-OD.11 460246 Outdoor panel, indicating the number of parking spaces available, four digits, high-luminosity red LED. Digit height: 110 mm. Dimensions: 407mm x 209mm x 70mm. Con-sumption: 20W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.

D2-OD.20 460247 Outdoor panel, indicating the number of parking spaces available, two digits, high-luminosity red LED. Digit height: 200 mm. Dimensions: 514mm x 290mm x 70mm. Con-sumption: 25W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.

D3-OD.20 460232 Outdoor panel, indicating the number of parking spaces available, three digits, high-luminosity red LED. Digit height: 200 mm. Dimensions: 514mm x 290mm x 70mm. Con-sumption: 35W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.


DX2-CA 460241 Display, two modules, cross - arrow, indicating the direction to free parking spaces in two directions. Input power: 24 V DC. Consumption: 5 W. Communication: RS-485. Arrow colour: green-red. Brightness intensity adjustable by software. Arrow height: 120 mm.

All Information Panels Advanced Gamma can be purchased from OEM Integrator Model Type or without enclosure panels of information integration. For any OEM Model, View Price and Delivery Time.

P1.3.3 EXTERIOR RANGE

CirP

ark

19


D2.OD.30 460242 Outdoor panel, indicating the number of parking spaces available, two digits, high-luminosity red LED. Digit height: 300 mm. Dimensions: 676mm x 381mm x 70mm. Con-sumption: 25W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.

D3.OD.30 460243 Outdoor panel, indicating the number of parking spaces available, three digits, high-luminosity red LED. Digit height: 300 mm. Dimensions: 676mm x 381mm x 70mm. Con-sumption: 37W. IP54. Luminosity control via software. Aluminium casing. Communication: RS485. Input power: 230 V AC.


D-VMS-OD 460147 VMS Panel, with information about the car park's capacity and occupation. Full gra-phic panel, yellow colour. Optional text and digits. Text height: 150 mm. Area: 64x16 pixels. Dimensions: 1,100 mm x 380 mm x 185 mm. Consumption: 120 W. IP55. Automatic luminosity control, internal ventilation system. Aluminium casing. Ethernet and RS commu-nication. Input power: 230 V AC.

D2.OD.30

All the information panels in the basic and advanced ranges are available as OEM models for integrators or without a box for integra-tion in information panels.

All information panels in the basic range are available as IP65 models.Please contact us for information about prices and lead times for any OEM or IP65 model.Prices and lead times

Panels by other manufacturers can be integra-ted in the system or instructions can be sent for integrating them.

CirP

ark

20

TCP-PARK+ 460234 Intelligent concentrator of car park guiding devices. RS-485 opto-isolated port. Input power: 230 V AC. Consumption: 2 VA. RS-485 and TCP-IP Ethernet communications. DIN rail.

PSC-240-24 200520 Switched power supply. Input power: 230 V AC. Output voltage: 24 V DC. Power: 240 W. DIN rail.



TCP-RF 460260 Intelligent RF concentrator of car park guiding devices. RS-485 opto-isolated port. Input power: 48 Vcc. Consumption: 2 VA. RS-485, 868 MHz Radiofrequency and TCP-IP Ethernet communications. DIN rail.


P1.4 CONTROL EQUIPMENT I-PARK


TCP-RF 460260

PSC-40-48 460224

CirP

ark

21

P2. INTELLIGENT LED LIGHTING SYSTEM: LED-PARK

BL-PARK 460601 LED lamp module, adjustable 4 W consumption, with support for anchoring the element to the CIRPARK channel and built-in refrigeration plate. Connection via cable with connector.

DL-PARK 460602 Power driver for controlling the LED lighting system. Management capacity, 3 to 4 BL-PARK. Connection input for four BL-PARK and for the connection with CL-PARK.

P2.1 LIGHTING MODULES


CIRCONTROL has developed various Global Ef� ciency So-lutions with the goal of providing operators with the tools they require to achieve optimum EFFICIENCY AND SAVINGS in their car park facilities.CIRCONTROL solutions enable operators to maximise their pro� ts from the operation of the car park, while increasing customer loyalty and improving their reputation, since they have the facilities with the highest added value in the mar-ket.

LED LIGHTING (INTELLIGENT CAR PARK LIGHTING MANAGE-MENT): • New LED lighting concept, integrated with the Car Park Guidance System, with the purpose of designing a car park that offers its users a more pleasant environment, based on the concept of COMFORT and leading to increased customer loyalty.

• Installation of LED lighting systems to achieve energy sa-vings of over 65% compared to facilities using � uorescent lighting systems.

• Ef� cient management of the car park’s lighting systems, according to occupation or the � ow of vehicles, integration with the CIRPARK System, intelligent switching and regula-tion, according to the � ow of vehicles, occupation and � ow of customers.

• Reduction of installation costs. Installation system compatible with the CIRPARK system. The two systems can be installed in a single action, and both systems can be written off together.

• Installation costs written off in three years, with a reduction in electricity and maintenance bills. One 20W � uorescent lamp per parking space 1,000 lumens – One 3W LED per parking space, 800 lumens. Three LEDs per parking space provide much more light with lower consumption.

• Lower maintenance costs, since the useful life of LEDs is 10 times longer than that of � uorescent lamps. Larger investment, lower maintenance costs.

CirP

ark

22

CL-PARK 460604 Header control, used for regulation via 0 - 10 V voltage power control, with RS485 output, for control with the CIRPARK software. One module per F.A.

TCP2RS+ 310029 Industrial RS-485 to TCP-IP Ethernet communication converter. RS-232/RS-485 opto-isolated port. Input power: 230 V AC. Consumption: 2 VA. DIN rail.

PSC-480-48 460603 Switched power supply. Input power: 230 V AC. Output voltage: 48 V DC. Power: 480 W. DIN rail. Power supply for 30 parking spaces.


PK-SAI-LED 460612 UPS Module Super Long Life Ni-MH (nickel-metal hydride). Rated voltage: 43.2 V, in permanent charge voltage: 52.5 V. Permanent load capacity for 1 hour: 400W. Communi-cation with SCADA Software for Battery status knowledge. Extended Temperature Range.

P2.2 CONTROL EQUIPMENT: LED-PARK

TCP2RS+ 310029

PK-SAI-LED 460612


CirP

ark

23

CirP

ark

24

P3. SYSTEM FOR ENERGY EFFICIENCY AND CAR PARK AUTOMATION: POWER-PARK

CIRCONTROL offers the car park market the technology available for optimum management of electric power, reducing consumption to the bare minimum. This process starts with monitoring the consumption of the car park. Once the consumption information is received, the electric resources of the facility can be optimally managed.By means of the CIRFIRE System, CIRCONTROL activates the car park’s ventilation systems, performing intelligent management of all smoke-extraction systems.Finally, CIRCONTROL electronic technology provides all kinds of instruments for monitoring signals and remote or programmed actions, allowing the centralisation of all car park facilities.CIRCONTROL applications can be used with the CIRPARK-Scada, which is fully prepared for integration in TOTAL management applica-tions.

• Ef� cient management of the ventilation systems to avoid sudden starting and stopping of the system. CO detectors send informa-tion to the station, which intelligently manages the movement of fans adapted with a speed regulator via the SCADA control software.

• Monitoring the power supply systems: Implementation of electric current meters, CVM-MINI, to collect up to 54 electricity parame-ters, with the option to display the information in consumption graphs.

• Preparation of energy ef� ciency studies: Energy Saving studies can be drawn up using the parameters detected and the results obtained from optimum management of the ventilation and power mains systems. These offer the car park Operator ef� cient, productive actions that can ve quickly written off.

CirP

ark

25

PK-ENERGY KIT 460188 Car park energy management kit. Can be used to manage and control the consumption and electric power of the car park. Kit made up of one CVM-MINI grid analyser + one three-phase measurement transformer.

TCP2RS+ 310029 Industrial RS-485 to TCP-IP Ethernet communication converter. RS-232/RS-485 opto-isolated port. Input power: 230 V AC. Consumption: 2 VA. DIN rail.

MR44-PARK 460211 Centralisation unit, with four digital inputs and four relay outputs. Input power: 230 V DC. Communication: RS485.

MRA42-PARK 460261 Centralisation unit, with two digital inputs, four analogue inputs and two relay outputs. 230 V DC input power. Communication: RS485.

MR50-TCP-PARK 460262 Control unit used to control automated systems, with 50 digital inputs. Input power: 230 V AC. Consumption: 6 VA. Ethernet connection.

CDU-TCP-PARK 460233 Signal concentrator, with information management and storage capacity, via the equipment control system over the RS485 bus. Four digital inputs and four relay outputs. 10BaseT/100BaseTX Ethernet port. Input power: 230 V AC.

P3.1 ENERGY EFFICIENT PARKING

P3.2 AUTOMATION EQUIPMENT

TCP2RS+


CirP

ark

26

P3.3 INTELLIGENT MANAGEMENT VENTILATION SYSTEM

P3.3.1 CO DETECTION SYSTEM CirFire

FM-C501 560972

One-zone CO detection control panel, expandable to 3 with module FM-M509, fitted in ABS plastic casing, with flush mount option. Each module allows connection of up to 32 detectors connected to 2 wires without polarity, with a maximum distance of 1 km. The system has three programmable level relays, extraction 1, extraction 2 and alarm. The relays can be configured to be activated with a fault. The system of algorithms has two operation types, standard or by line sensing. The system has a test mode for maintaining the installation. Optionally, the system can incorporate the cards FM-TC500 or FM-TC501, which allow you to control a speed regulator connected to a motor, making energy sa-vings. Dimensions 439 x 268 x 112.

FM-C502 560973

Two-zone CO detection control panel, expandable to 3 with module FM-M509, � t-ted in ABS plastic casing, with � ush mount option. Each module allows connection of up to 32 detectors connected to 2 wires without polarity, with a maximum distance of 1 km. The system has three programmable level relays, extraction 1,extraction 2 and alarm. The relays can be con� gured to be activated with a fault. The system of algorithms has two operation types, standard or by line sensing. The system has a test mode for maintaining the installation. Optionally, the system can incorporate the cards FM-TC500 or FM-TC501, which allow you to control a speed regulator connected to a motor, making energy savings. Dimensions 439 x 268 x 112.

FM-C503 560974

Three-zone CO detection control panel, fitted in ABS plastic casing, with flush mount option. Each module allows connection of up to 32 detectors connected to 2 wires without polarity, with a maximum distance of 1 km. The system has three program-mable level relays, extraction 1,extraction 2 and alarm. The relays can be configured to be activated with a fault. The system of algorithms has two operation types, standard or by line sensing. The system has a test mode for maintaining the installation. Optionally, the system can incorporate the cards FM-TC500 or FM-TC501, which allow you to control a speed regulator connected to a motor, making energy savings. Dimensions 439 x 268 x 112.

P3.3.2 CO DETECTOR CirFire

FM-D500 560971

Electrochemical carbon monoxide detector with base and spacer for pipe sight in-cluded. Connection to 2 wires without polarity. Designed for installation on ceilings. Certi� ed according to standard UNE 23300:1984.

FM-DP500 560978

Carbon monoxide detector with electrochemical cell. Designed for installation on pi-llars or walls. Connection to 2 wires without polarity. Certi� ed according to standard UNE 23300:1984.


CirP

ark

27

P3.3.3 CO ACCESSORIES CirFire

FM-TC500 560976

Card for connecting up to 3 speed regulators to control their corresponding motors and obtain optimum performance of the extraction motor, saving on the electricity consumption.

FM-TC501 560977

Card for connecting up to 3 speed regulators to control their corresponding motors and obtain optimum performance of the extraction motor, saving on the electricity consumption. Also includes remote connection via Ethernet, allowing programming, remote management and telemaintenance of the installation.

MONOPHASIC ENERGYFrequency converter for triphasic motors 230V.CIRCONTROL series converters are suitable for the variation of speed through voltage and frequency ventilation by helical and centrifugal triphasic motors 230V.Energy converter: Monophasic 230V. 50/60 Hz.

TYPE CODE INTENSIDAD KW CV

FM-V05M 560650 2,5 0,37 0,5

FM-V2M 560657 8 1,5 2

TRIPHASIC ENERGYFrequency converter for triphasic motors of 400VCIRCONTROL series converters are suitable for the variation of speed through voltage and frequency ventilation by helical and centrifugal triphasic motors 400V Energy converter: Triphasic 400V. 50/60 Hz.

Note: The converter is selected in function of extraction engine capacity.

TYPE CODE INTENSIDAD KW CV

FM-V1T 560652 2,5 0,75 1

FM-V5T 560653 9 4 5,5

FM-V10T 560654 16 7,5 10

FM-V20T 560655 30 15 20

P3.3.4 FRECUENCY CONVERTER CirFire

CirP

ark

28

P4. CONTROL EQUIPMENT AND MANAGEMENT SOFTWARE

P4.1 CONTROL EQUIPMENT

TCP2RS+ 310029 Industrial RS-485 to TCP-IP Ethernet communication converter. RS-232/RS-485 opto-isola-ted port. Input power: 230 V AC. Consumption: 2 VA. DIN rail.

CAR-485 310014 Signal amplifier unit for the RS-485 bus, can be used to increase the number of devices per bus. RS-485 opto-isolated ports. Input power: 24 V DC. Consumption: 1.5 W. DIN rail.

CONEC-PARK 460199 Car park concentrator, used for standalone management of the car park guidance system. Configuration capacity of the parking area and management of the information panels without requiring a PC. Management capacity of up to 500 parking spaces. Input power: 230 V AC.


CirP

ark

29

P4.2 MANAGEMENT SOFTWARE

P4.2.1 MANAGEMENT SOFTWARE: CIRPARK

Software CirPark Scada

610105 SCADA car park management software. Real-time occupation information. The user can enter the map of the facility, screens for viewing the occupation, areas with movement of vehicles/persons, statistics, reports, multi-client software, browser connection, JAVA, XML, RSS server, IP camera monitoring. Energy-saving system, energy-control measurement, CO monitoring. Unlimi-ted number of parking spaces.

Software CirPark Scada 100PL

610105-1 SCADA car park management software. Real-time occupation information. The user can enter the map of the facility, screens for viewing the occupation, areas with movement of vehicles/persons, statistics, reports, multi-client software, browser connection, JAVA, XML, RSS server, IP camera monitoring. Energy-saving system, energy-control measurement, CO monitoring. Mana-gement of up to 100 parking spaces.


610105-2 SCADA car park management Software. Real-time occupation information. The user can enter the map of the facility, screens for viewing the occupation, areas with movement of vehicles/persons, statistics, reports, multi-client software, browser connection, JAVA, XML, RSS server, IP camera monitoring. Energy-saving system, energy-control measurement, CO monitoring. Mana-ges up to 250 parking spaces.


610105-3 SCADA car park management software. Real-time occupation information. The user can enter the map of the facility, screens for viewing the occupation, areas with movement of vehicles/persons, statistics, reports, multi-client software, browser connection, JAVA, XML, RSS server, IP camera monitoring. Energy-saving system, energy-control measurement, CO monitoring. Mana-ges up to 500 parking spaces.

P4.2.2 CAPACITY CONTROL SOFTWARE: CIRPARK-LT

Software CirPark Scada-LT

610111 SCADA car park area management software. Real-time occupation information. The user can enter the map of the facility, screens for viewing the occupation, areas with movement of vehicles/persons, statistics, reports, multi-client software, browser connection, JAVA, XML, RSS server.

Software CirPark Scada LT Basic

610111-1 SCADA car park area management software (basic configuration: one input - one output). Real-time occupation information. The user can enter the map of the facility, screens for viewing the occupation, areas with movement of vehicles/persons, statistics, reports, multi-client software, browser connection, JAVA, XML, RSS server.


CirP

ark

30

Comissioning 460200

Definition, project follow-up, setup, adjustments and start-up support and CIRPARK system trai-ning. User-level training.

Training CirPark Expert 460201

Two-day training course for the installation technician/project manager. Contents: Definition, project follow-up, setup, adjustments, maintenance and start-up of the CIRPARK system. Travel expenses not included. Training certificate.

P4.3 TRAINING AND START-UP


CirP

ark

31

P5. INSTALLATION ACCESSORIES

C-LHS4 460115 3m halogen free hose cable for connection SP3-SP3. 2x1,5 mm2 for power supply + 2x0,34 mm2 twisted pair and shielded for communication bus RS485.

C-LHS4-10 460115L 10m halogen free hose cable for connection SP3-SP3. 2x1,5 mm2 for power supply + 2x0,34 mm2 twisted pair and shielded for communication bus RS485.Special thickness for pipe instalation.

C-SS4-T 460152 3m halogen free hose cable, for SP3-SP3 connection. 2 x 1.5 mm2 power cable + 2 x 0.34 mm2 twisted and shielded cable for the RS-485 bus. Specially designed for installation inside a tube.

C-SS4-T-10 460152L 10m halogen free hose cable, for SP3-SP3 connection. 2 x 1.5 mm2 power cable + 2 x 0.34 mm2 twisted and shielded cable for the RS-485 bus. Specially designed for installation inside a tube.

C-LHP3 460116 3m halogen free hose cable, for sensor-light indicator connection. 3 x 0.75 mm2.

C-LH4 460117 100m halogen free hose cable extending the row of devices. 2 x 1.5 mm2 power cable + 2 x 0.34 mm2 twisted and shielded cable for the RS-485 bus.

P5.1 PARKING SPACE-PARKING SPACE SYSTEM WIRING

P7P7.1


CirP

ark

32

CB-PARK-1 460605 Wiring unit for connecting CL-PARK to DL-PARK, 2 x 0.50 mm2, including halogen-free connectors and wiring. 60 cm.



C-BL 460607 100-m Halogen-free power and control-signal wiring for the DL-PARK systems insta-lled: 2 x 6 mm2 + 1 x 0.34 mm2.

P5.3 ATTACHMENT ELEMENTS

PK-SOCKET 460159 Polycarbonate socket for SP3 tube installations, including a DPU flow detector. 25-mm tube for connecting sensors and 20-mm tube for connecting the light indicator sensor.

PK-CP245 460170 Blind aluminium channel, 48 mm wide and 2.45 m long.

PK-CP245Fe 460170g Blind Galvanised steel channel, 48 mm wide and 2.45 m long.

P5.2 LED LIGHTING SYSTEM WIRING


CirP

ark

33

PK-CP050 460171 Blind aluminium channel, 48 mm wide and 0.5 m long.

PK-TSS 460172 T-shaped galvanised-steel accessory for mounting the parking space detector.

PK-ESS 460179 Galvanised-steel accessory for mounting the parking space detector.

PK-CROSS-LED 460608 X-shaped galvanised-steel accessory for mounting the space indicator, in the LEDPARK system.

PK-ELBOW-LED 460609 T-shaped galvanised-steel accessory for mounting the space indicator, in the LEDPARK system.

PK-ESS-LED 460611 I-shaped galvanised-steel accessory for mounting the space indicator, in the LEDPARK system.

PK-TPPx 460173 Black plastic accessory for mounting the space indicator.

PK-TPP2 460177 Galvanised-steel accessory for mounting the PP2 space indicator.

PK-C 460174 Galvanised-steel accessory at a 90º angle.


CirP

ark

34


PK-E 460175 Galvanised-steel accessory for joining channels.

PK-PUC 460176 Galvanised-steel accessory for attaching the channel to the ceiling.

CirP

ark

35

P6. LICENSE-PLATE RECOGNITION SYSTEM: LPR-PARK

Conventional license-plate recognition systems simply capture an image of the license plate, process it and transfer it to a higher system. CIRCONTROL systems add a whole new range of additional features that offer multiple applications based on vehicle license-plate recognition.All CIRCONTROL solutions have been developed in the � eld of access control systems to guarantee correct management and safety of multiple cases in this sector, where an image can provide a lot of information.

The LPR-PARK system represents major progress in systems that provide an optimum tool to support access control and other applications that require quick and accurate license-plate identi� cation.The system can be installed on a single lane or on as many lanes as necessary according to the client-server structure and the IP cameras used by said structure. No video capture card is required.

It can be very easily installed and con� gured, and includes options such as external database and network integration. In addition, it can be connected to digital video recorders, which associate the license plate with sequences, with GSM-GPRS connectivity for sending alarms and remote-maintenance services. Moreover, it offers the possibility of transferring the read license plates to other operating systems, such as, for example, machines for issuing and validating magnetic tickets at access control points.All in all, the LPR-PARK system is a highly reliable, accurate, � exible system that can produce the expected results in many applications that require an standalone, sturdy license-plate recognition system that can be integrated with other control systems.

The following image-recognition solutions based on the capture of vehicle license plates are used:• LPR-SOFT license plate reading system for integrators• CAS-LPR/ACCESS access control system

CirP

ark

36

P6.1 ACCESS CONTROL & PARKING SOLUTIONS

VMAT-LPR 540104 Video camera for one lane with stopped or moving vehicles. Includes one high-resolu-tion IP camera, for lane widths of up to 3.5 m, mounted in an outdoor casing.

VMAT-MP-LPR 540112 Video camera for one lane with stopped or moving vehicles. Includes one high-resolu-tion IP MEGAPIXEL camera, for lane widths of up to 3.5 m, mounted in an outdoor casing.

The optics may vary depending on the reading distance is needed. The Standard covers optical reading distance of 6 to 12 meters, to other larger or smaller distances check price and delivery time.

LPR-SOFT 610153 Basic licence for operation of the LPR-PARK system, includes CD with setup software and for checking the operation of the system and one HASP USB dongle (licence for one lane) per PC.

LPR-A 610155 Expansion of the LPR-SOFT software licence. Licence for 1 lane on the PC with the basic licence

CAS-LPR 160104 Access-control management software, integrated in all of CIRCONTROL's access and presence control devices. Access-control module, using the licence-plate reading system. Licence for one lane.

CAS-LPR/ACCESS 610149 Expansion of the CAS VSIM/ACCESS software licence. Licence for one lane on the PC for the first lane (can be expanded to eight lanes - please contact us if you need a system to control more lanes)

CAS-LPR/MP 610150 Additional multi-user licence for CAS-LPR/ACCESS


CirP

ark

37

VMAT-ACCESS 540102 Input and output unit. Input power: 110-240 V AC. Consumption: 10 VA. Eight digital inputs (two inputs per lane: 1 and 2 for lane 1.... 7 and 8 for lane 4). Four relay outputs (potential free, NO contacts). RS-485 communications (terminal strip) for connection with the Ethernet converter included in the unit. RS-485-series converter to TCP/IP Ethernet. Input power: 85-240 V AC. Consumption: 2 VA. LED indicators for input power and RX/TX signals. RJ45 connector for Ethernet port.

VMAT-VSOP 540011 Support base used to attach the camera. Made from galvanised steel, with a metallic grey finish.

VMAT-LED 460283 Infrared Focus, 850 nm, for installations without illumination. 230 VAC

DLI 140022 Inductive loop detector. Input power: 230 Vac. Consumption: 1.5 VA. Control with one inductive loop. Activates a relay when a detecting a metal mass on the loop. Possibility of adjusting the sensitivity. Adjustable pulse type, during or after detection.


P6.2 ACCESSORIES


CirP

ark

38

P7. INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRIC VEHICLES: CirCarLife (see section E)

CIRCONTROL, in partnership with various government departments and in response to their needs, has developed a new busi-ness line aimed at providing solutions for all future situations that may arise during the process of rolling out electric vehicles.CIRCONTROL has developed various intelligent systems for charging electric vehicles, which guarantee the optimum EFFICIEN-CY of the facilities.Each one of the solutions designed by CIRCONTROL ful� ls a speci� c function, currently covering the following range of op-tions:

• Intelligent charging system for city streets: o Solution for motorcycles o Solution for vehicle � eets• Intelligent charging system for car parks: o Solution for integration with car park payment systems o Solution for integration with parking meters o Solutions for apartment buildings• Intelligent charging system for city streets: o Solution for Integration with motorway toll-collection systems o Solution for petrol stations

The range of solutions offered by CIRCONTROL takes into account what are considered to be basic needs: charging in cities, public car parks, petrol stations or private car parks (homes).

The intelligent vehicle-charging system has the following objective:

INTELLIGENT CHARGING SYSTEMS FOR CAR PARKS

Public underground car parks or car parks in buildings provide an optimum location for installing vehicle charging systems, since these operate with security or control staff and users feel safer leaving their vehicles plugged in at supervised facilities.

The Spanish government’s “Movele” plan contemplates a total of one million electric vehicles on the road by 2014. According to the Spanish association of car park operators - ASESGA, there are currently 1,200,000 parking spaces available in Spain.

The electric car is a new business for car park operators: • Profi ts, based on a new concept• Savings in maintenance and ventilation• Increased customer loyalty and comfort for customers and em-ployees

• Intelligent charging with the option of charging vehicles during off-peak hours, duration of the charging time and controlled charging to prevent the collapse of the grid.

• Prepaid systems, so that users only pay for the energy their vehicles consume.

• Completely safe, intuitive systems which can be used by any user.

At present there are approximately 27,000,000 vehicles registered in Spain, which means that there will have to be 44,000 parking spaces equipped with these systems by the year 2014 to service all the electric vehicles in circulation.These are theoretical calculations, but it remains a fact that the car park sector must be prepared to serve these users and increa-se their customer loyalty by making a � rm commitment to green vehicles.

CirP

ark

39

www.circontrol.com

40404040

41

CirC

arLi

fe


INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRICVEHICLES

In this catalogue, CIRCONTROL, a leading company in the electric vehicle chargingsector, shows you the safest solutions for charging in:

• Urban roads • Motorcycles • Family homes • Communal blocks • Public car parks • Vehicle fl eets • Rapid charging

42

CirC

arLi

fe

New

New

New

INTELLIGENT RECHARGING SOLUTIONS FOR ELECTRIC VEHICLES

E1. WALLBOX SMART CHARGING SYSTEM FOR CAR PARKS AND COMMUNAL BLOCKS

45

E2. CHARGING SYSTEM FOR CITY STREETS AND INTER-CITY ROADS 46

E2.1 Smart Charging Posts 46

E2.2 F Range Charging Posts 47

E2.3 Basic Range Charging Posts 48

E3. CHARGING SYSTEM FOR 2-WHEEL VEHICLES 49

E4. ULTRA-FAST CHARGING SYSTEM 50

E5. MULTIPOINT SYSTEM 51

E6. COMMUNICATION ACCESSORIES 52

E7. PRE-PAYMENT SOLUTIONS 54

E8. MANAGEMENT AND CONTROL SOFTWARE 55

E9. CHARGING MODES 56

E10. TYPES OF CONNECTORS 57

E11. INSTALLATION DIAGRAMS 58

CirCarLife - SHORT FORM CATALOGUE 2012 -1013

CONTENTS

E

New

New

New

New

43

CirC

arLi

fe

CirCarLife - INSTALLATION EXAMPLES


44

CirC

arLi

fe

ULTRA-FAST CHARGING SYSTEM

ELECTRIC VEHICLE FLEET CHARGING

ELECTRIC VEHICLE CHARGING IN CITY STREETS

ELECTRIC VEHICLE CHARGING IN PUBLIC CAR PARKS (INDOORS)

ELECTRIC VEHICLE CHARGING IN COMMUNAL BLOCKS

ELECTRIC VEHICLE CHARGING IN CAR PARKS

2-WHEEL ELECTRIC VEHICLE CHARGING

USER IDENTIFICATION

Standard solution

Basic solution

RFID Access / Prepayment

Smart solution

Standard solutionMultipoint system

Smart solution

AC/DC Fast charger

AC/DC charging, in accordance with the CHAdeMO standard / IEC 61851

CCL-WBM-SMART

CCL-PM1

CCL-CM

CCL-WBM-SMART

CCL-WB-SL

CCL-PE2 MODE 3

CDU-TCP

CCL-CB3

CCL-WBC

CCL-CARD CCL-TERM

SELECTION TABLE OF CirCarLife DEVICES, BY APPLICATION


4545

CirC

arLi

fe

Ref Code Supply Max. PowerCharging Voltage

Max. Charging Current

Connector typeCharging

ModeLCD Display Timer

EnergyMeter

RFIDEthernet

and RS485

CCL-WBC490074 1P+ N 3kW/7kW 230V 16A/32A Type1 Mode 3 - - - - -

CCL-WB MIX490076 1P+ N or 3P+ N*

7kW or 21kW

230V / 400V

32A Type 2 + Schuko Mode 3 and 1 - - - - -

CCL-WBM490072 1P+ N or 3P+ N*

7kW or 21kW

230V / 400V

32A Type2 Mode 3 - - - - -CCL-WBC SMART

490075 1P+ N 3kW/7kW 230V 16A/32A Type1 Mode 3 • • • • •CCL-WBM SMART 490073 1P+ N 7kW 230V 32A Type2 Mode 3 • • • • •CCL-WBM SMART TRI

490089 3P+ N 21KW 400V 32A Type2 Mode 3 • • • • •CCL-WBS-SMART

490079 1P+ N 3kW 230V 16A Schuko Mode 1

or 2 • • • • •CCL-WB MIX SMART

490077 1P+ N 7kW 230V 16A/32A Type 2 + Schuko Mode 3 and 1 • • • • •

CCL-WB MIX SMART TRI

490090 3P+ N /1P+N 3+21kW230V /400V

16A/32A Type 2 + Schuko Mode 3 and 1 • • • • •

Cable Support

490078 Included with type 1 - - - - - - - - - -

* Depending on the local installation

E1. WallBox smart charging system for car parks and communal blocksDifferent types of car parks have different electric vehicle charging features and requirements. That is why different electric vehicle charging equipment solutions are required for each type of insta-llation.

Circontrol offers a variety of different solutions, adapted to each type of car park, whether in single-family homes, communal re-sidence car parks, public and shopping mall car parks, hotels, etc. These solutions consist of devices that can function standalone and devices with communication ability which enable specific functions via software adapted to each type of installation.

Common technical features Additional technical features of the Smart Series

· Protection degree : IP54.

· Compatible with Mode 3 IEC 61851-1. (Certi� ed). · · Charge status light indicator (blue, green and red) .

· Type I, Type II or Schuko connectors, in compliance with the IEC 62196-2 regulations.

· Simple installation, 4-point wall � xing.

· Self-extinguishing ABS plastic casing.

· Type I support, cable and connector (optional).

· Customised housing � nish and logos.

· Backlight LCD display.

· Integrated energy measurement (Class 1 meter) and Timer.

· Pre-payment and access control with RFID cards.

· Ethernet connection, RS-485 communications and data storage.

· 3G and GPRS communications (optional).

NEW


46

CirC

arLi

fe

Ref Code Type of Network Max. Power Charging Voltage Max. Charging Current Connector type Charging Mode

CCL-PM1 490080 1P+ N 7kW 230V 32A Schuko x 2 Mode 1

CCL-PM3 490081 1P+ N 14kW 230V 64A Type II x2 Mode 3

CCL-PM-MIX 490082 1P+ N 11kW 230V 48A Schuko + Type 2 Mode 1 and Mode 3

CCL-PT3 490083 3P+N 44kW 400V 64A Type II x2 Mode 3

CCL-PT-MIX 490084 1P+ N and 3P+N 25kW 230V/400V 48A Schuko + Type 2 Mode 1 and Mode 3

E2. Charging system for city streets and inter-city roads

Charging systems for city streets require very specific features, es-pecially in terms of robustness, through being exposed to variable environmental conditions, including acts of vandalism. Besides the-se special requirements, they should also have the adequate electric safety measures for equipment with characteristics such as these.

With this in mind, Circontrol provides innovative smart charging so-lutions that are adapted to the special conditions of city streets for all sorts of two and four-wheel vehicles, according to the latest in-ternational charging regulations and offering a variety of solutions for each type of installation.

· Backlight LCD display:

· Kwh consumption in real time.

· Indicators: “Available”, “Reserved”, “Not available”.

· Instructions for use displayed on the screen.

· User ID.

· Compatible with Mode 3 IEC 61851-1 (Certi� ed).

· Type I, Type II or Schuko connectors, in compliance with

the IEC 62196-2 regulations.

· IK10 Vandal-proof polyurethane casing.

· Protection degree : IP54 and anti-graf� ti � nish.

· RFID Identi� cation and pre-payment.

· Mechanical locking of the Type 2 and Schuko socket.

· Self-resetting circuit breaker and earth leakage protection.

· Built-in Ethernet and RS-485 communication systems, 3G (optional).

· Connected to SCADA control software.

· Remote control and monitoring of the unit.

· Integration with third-party software (OCPP,XML,…).

· Built-in internal heater (optional).

· LED RGB to show charging status.

SMART Charging Posts

Common technical features

E2.1 Smart Charging Posts

NEW


4747

CirC

arLi

feRef Code Type of Network Max. Power Charging Voltage

Max. Charge

Connector type Charging ModeTCP-IP Ethernet Communications

CCL-PE1 MODE 3 490040 3P+N 21kW 400V 32A Type 2 Mode 3 -CCL-PE1 IP MODE 3 490041 3P+N 21kW 400V 32A Type 2 Mode 3 •CCL-PE2 MODE 3 490042 3P+N 42kW 400V 32A x 2 Type 2 x 2 Mode 3 -CCL-PE2 IP MODE 3 490043 3P+N 42kW 400V 32A x 2 Type 2 x 2 Mode 3 •CCL-PE2 MIX

490045F 1P+ N and 3P+N 25kW 230V/400V 32A + 16ASchuko +

Type 2Mode 1 and Mode 3 -

CCL-PE2 IP MIX F490046F 1P+ N and 3P+N 25kW 230V / 400V 32A + 16A

Schuko + Type 2

Mode 1 and Mode 3 •

· Backlight display, indicating the available credit.

· Circular stainless steel housing.

· Protection degree: IP54 and anti-graf� ti � nish.


· Type II or Schuko connectors, in compliance with IEC 62196-2 regulations.

· LED RGB Indicators to show the charging status.






· Built-in energy metering system.

Type II or Schuko connectors, in compliance with IEC 62196-2 regulations.

Self-resetting circuit breaker and earth leakage protection.

Built-in Ethernet and RS-485 communication systems, 3G (optional).

E2.2 F Range Charging Posts

The design of the � xed head "F" range charging posts is based on their integration in urban areas and their installation in areas where EVs can be easily charged. The state-of-the-art, slender design and robustness of the metallic cylinder and Polyurethane head have been specially desig-ned to resist acts of vandalism and withstand outdoor conditions.Its LED technology light marker makes it easily to locate in urban areas and it can inform users about the charging status at a glance. CIRCON-TROL has based its system on a Mode 3 semi-fast charging unit, offering its F Range Charging Posts with many different con� gurations that also take into account current market demands.

F Range Charging


NEW


48

CirC

arLi

fe

Ref Code Type of NetworkMax.

PowerCharging Voltage

Max. Charge

Connector type Charging Mode TCP-IP

Ethernet3G

(Optional)RS-485

Circuit breaker protection with

remote reset

CCL-PE1490000 1P+N 3.6kW 230V 16A Schuko

Mode 1 and Mode 2 - - - -

CCL-PE2490001 1P+N 7.2kW 230V 16A x 2 Schuko + Schuko

Mode 1 and Mode 2 - - - -

CCL-PE2 COM

490025 1P+N 7.2kW 230V 16A x 2 Schuko + SchukoMode 1 and

Mode 2 - - • -CCL-PE2 IP


Mode 2 • • • -CCL-PE2 MOV


Mode 2 • • • •

· Backlight display, indicating the available credit.

· Circular stainless steel housing.

· Protection degree : IP54 and anti-graf� ti � nish.

· Type of Connector: Schuko.







· Current socket lock with mobile head.

E2.3 Basic Range Charging Posts

The Charging Posts of the Basic Range have been designed to ca-ter for the current smart electric vehicle charging requirements on public roads and with user safety in mind. Therefore, it has applied the current electrical safety regulations to the design of the system. Likewise, the Charging Posts of the Basic Range have been desig-ned with a metallic cylinder structure and mobile head that protects its sockets, ensuring robustness against vandalism acts and a very simple electrical charging process. They have been designed to be installed in public car parks, offering the basic pre-payment service with proximity cards, which can be completed with a few simple steps. These posts have built-in remote communication devices, so that they can be monitored and parameterised to achieve total control of ener-gy consumed during the charging process.

Basic Range Charging Posts



4949

CirC

arLi

feRef Code

Type of Network

Max. Power

Charging Voltage

Max. Charging Cu-rrent per Socket

Connector typeNumber of sections

RS485 Communications

Ethernet Com-munications

Charging Mode

CCL-CB3490023 1P+ N 9.2kW 230 V 16A Schuko 3 - - Mode 1

CCL-CB3 COM490036 1P+ N 9.2kW 230 V 16A Schuko 3 • - Mode 1

CCL-CB3 IP490037 1P+ N 9.2kW 230 V 16A Schuko 3 - • Mode 1

CCL-CB6490024 1P+ N 18.4kW 230 V 16A Schuko 6 - - Mode 1

CCL-CB6 COM 490038 1P+ N 18.4kW 230 V 16A Schuko 6 • - Mode 1

CCL-CB6 IP490039 1P+ N 18.4k 230 V 16A Schuko 6 - • Mode 1

E3. 2-wheel vehicle charging systemThe 2-wheel vehicle charging solution of the CirCarLife family has been designed to cater for the charging needs of electrical 2-wheel vehicles, such as motorcycles or electric bicycles, in compliance with all electrical safety regulations as well as access and measu-rement safety and consumption management.

This solution comprises a controller that is responsible for mana-ging the pre-payment services of RFID proximity cards, selecting the current socket and managing the consumption of each socket, while offering adequate safety systems to protect vehicles and users.

The support with all current sockets used to charge 2-wheel vehi-cles is part of the controller's structure. Each socket is located at a specific point on the controller so that the vehicle can be comforta-bly parked before being charged.

The robustness of the structure guarantees a long useful life and adequate protection against acts of vandalism. This has been a determining factor when designing the device, while achieving a sleek and elegant look too.

The whole family of CirCarLife products has been designed to pro-vide electric vehicle users with a simple method to charge their ve-hicle where it is parked, so 2-wheel vehicle charging devices have been designed with a simple access and energy payment system that uses contact-less cards, where the whole charging process can be completed in only a few steps by any user, with no need for any sort of technical knowledge.

2-wheel vehicle charging devices have been designed to be ins-talled on public roads or special car parks for motorcycles or bicy-cles. Such a special design means that they are ideal for 2-wheel vehicle parking areas.

· Vandal-proof metallic casing.


· Energy meter.


· Backlight display with an indicator of the available credit.

· Selection push-buttons, with status indicator.

· Circuit breaker and earth leakage protection.

· Communications: Ethernet and RS-485, 3G (optional).

· Charging data storage.

2-wheel EV



50

CirC

arLi

fe

Ref Code Type of Network FrequencyMax.

ConsumptionMax.

Charging Voltage


Connector type Charging Mode

CCL- QP-1490061 3P 50/60 Vdc +/- 5% 50kW 500Vdc 120Adc JEVS G105 Mode 4

CCL- QP-2 490062 3P 50/60 Vdc +/- 5% 50kW x2 500Vdc x2 120Adc x2 JEVS G105 x2 Mode 4

CCL- QP-MIX490063 3P+ N 50/60 Vdc +/- 5% 50kW / 21kW 500Vdc /400Vac 120Adc / 32AIII Type II and JEVS G105

Mode 3 and Mode 4

CCL- QPC-1 4900983P 50/60 Vdc +/- 5% 50kW 500 Vdc 120Adc JEVS G105 Mode 4

CCL- QPC-MIX490099 3P+ N 50/60 Vdc +/- 5% 50kW/21kW 500 Vdc, 400 Vac 120Adc / 32AIII Type II and JEVS G105

Mode 3 and Mode 4

CCL- QPM490064 3P+ N 50/60 Vdc +/- 5% 55kW 500 Vdc 120Adc - Mode 3 and

Mode 4

E4. Ultra-Fast charging systemCIRCONTROL's ultra-fast charging stations offer the fastest way to recharge the current electric vehicles used. The innovative construc-tion design offers a quick charging solution that is easy to use and complies with the current standards (CHAdeMO) for fast electric vehi-cle charging with direct current. Ease of installation and electrical pro-tection to increase user safety are other major factors of consideration in the system design.

Integrated communications in this device enable permanent connec-tion with a remote control station, which monitors the device charging data in real time and activates the device remotely, meaning it can be simply and fully exploited.

· 8” XGA TFT LCD Screen for user interaction.

· Consumption meter, in kWh and in real time.

· Instructions for use displayed on the screen.

· Light indicator of the charging status.

· Start, Stop and Emergency Stop buttons.

· RFID Identi� cation and pre-payment (optional).

· Current socket lock during the charging process.


· Command controller from the EV via the CAN bus.


· Protection degree: IP54 and anti-graf� ti � nish.

· Built-in internal heater (Optional).

· Standard working temperature range: -10ºC to 65ºC.

· IK10 Vandal-proof polyurethane casing

· Remote control and monitoring of the unit via XML, HTML.


· Compatible with Mode 4 IEC (Certi� ed).


Dispenser (1) Power Unit (2)

· Mains switch with line breaker.

· Protection against overloads, short-circuits and insulation faults

with an automatic switch.

· Built-in harmonics � lter (optional).

· Protection degree: IP44 (with optional IP54 Kit).

· Built-in internal heater (Optional).

· Communications: With dispenser, via RS-485.

· Self-diagnosis of the charging point and vehicle, with automatic

circuit disconnection in case a fault is detected.

· Standard working temperature range: -10ºC to 65ºC.

(1) (2)


5151

CirC

arLi

fe

Ref CodeType of Net-

workMax. Power

Charging Voltage


Connector type Charging Mode RFID Receiver

CCL-WB-SL 490091 1P+ N 3.6kW 230V 16A Schuko Mode 1 Multipoint

CCL-WBM-SL 490092 1P+ N 7.2kW 230V 32A Type 2 Mode 3 Multipoint

CCL-WBM-SL TRI 490093 3P+ N 21kW 400V 32A Type 2 Mode 3 Multipoint

CCL-WB-SL MIX490094 1P+ N 7.2kW 230V 32A Schuko + Type 2 Mode 1 and Mode 3 Multipoint

CCL-WB-SL MIX TRI490095 1P+ N /3P+ N 21kW 230V / 400V 32A Schuko + Type 2 Mode 1 and Mode 3 Multipoint

CCL-CM490015 1P+ N - 230V - - - •

E5. Multipoint SystemThe multi-point system of the CirCarLife range has been designed to offer a smart electric vehicle charging solution for car parks with multiple outlet sockets for electrical vehicles.

This solution allows smart electric vehicle charging management of a large number of electric vehicles, controlling different para-meters of the electric network and the vehicles connected to it, as well as user and car park manager preferences. In this way, users can get maximum results from vehicle charging in accordan-ce with user requirements by charging under the most favourable conditions in terms of electricity tariffs or by opting for immediate charging.

Technical features of Multipoint controllersCommon technical features of

WallBox boxes

· Multipoint master controller for 32 sockets.

· Steel metallic body.

· 10.4” XGA TFT LCD Touch screen.

· Access, pre-payment and identi� cation with ISO14443A proximity cards, magnetic band or bar code (optional).

· Ethernet and RS-485 communications.

· Built-in maximum demand management.

· Optional integration with other systems. (Payment systems, utility company meters, power analyzers, harmonics � lters, occupation and guiding systems).

· Management of events, alarms, historical logs and data analysis.

· Harmonic distortion monitoring.



· Compatible with Mode 3 IEC 61851-1. (Certi� ed).

· Charge status light indicator (blue, green and red).

· Type II or Schuko connectors, in compliance with the IEC 62196-2 regulations.

· Simple installation. 4-point wall � xing.

· Self-extinguishing ABS plastic casing.

· Communications: RS-485.

· Customised housing � nish and logos.

· Elegant, aesthetic design.

NEW

Energy efficiency


52

CirC

arLi

fe 3G Modem

Technical features

· Low energy consumption.

· Rigid aluminium box.

· Compact unit.

· High-speed processor (ARM 9).

· 10/100 Mbps Ethernet Port.

· Remote con� guration and management.

· Class 1 Div 2 Certi� ed.

· Supported Technologies (HSUPA, UMTS, EDGE, GPRS (MS-12), GSM).

· Supported Bands:

· Three-band for UMTS/HSDPA/HSUPA.

· 850/1900/2100 MHz.

· Four-band GPRS/EDGE.

· 850/900/1800/1900 MHz”.

· Temperature range: -30ºC to 70º C.

3G communications accessory in models with Ethernet TCP/IP communications.

E6. Communication accessories

The CirCarlife telecommunication accessories can be used to connect all units of the Circarlife range and establish communications networks, even remotely. The user can remotely manage the full display and control all equipment with the use of the CirCarlife Scada control and supervision software and 3G modem. Ideal for improving and reducing communication installations between outdoor and car park devices, where the installation and configuration of cabling elements required for communications networks is not always a simple task.

Ref Code

3G-MODEM 490028

3G Modem


5353

CirC

arLi

fe

CDU-TCPSmart standalonedata centralising unit

The CDU-TCP unit has been designed with the latest CIRCON-TROL technology, based on CirCarLife Scada software. The in-side of the unit has a microprocessor with a 64 Mb memory and routines have been programmed for the drivers of the CIRCON-TROL devices. Up to 10 CIRCONTROL charging points can be connected to the RS-485 communications port. The Ethernet or optional 3G connection can be used to access this bus and its memory via remote communications, such as, for example, the Internet. It records and stores various weeks of data collected from the devices connected to the system in case of a loss of commu-nications with the control system (higher SCADA). Once the com-munications have been established again, the CDU-TCP returns the data stored in the memory to the control system (higher SCA-DA), preventing the loss of data during loss of communications. This unit can be programmed to manage events (alarms), taking into account the parameters of any CIRCONTROL unit connected to the unit.

Technical features

· DIN RAIL Format ABS plastic box.

· Built-in Web and XML server.

· RS-485 Modbus expansion bus.

· 10/100 Base/TX Ethernet connection 3G (optional).

· Controls up to 10 charging points.

· Internal memory to store data.

· 4 digital relay inputs and outputs controlled remotely or via an internal con� guration.


· Embedded Circarlife Software.

· Can function standalone, depending on different actions that can be con� gured.

NEW

Ref Code

CCL-CDU-TCP 490050


54

CirC

arLi

fe

E7. Pre-payment solutions

The autonomous pre-payment systems for electric vehicle charging are at present the simplest, securest and most useful and economical solution as a payment method for electric vehicle charging services. Circontrol offers pre-payment options using proximity cards for any kind of electric vehicle charging device. It also offers a wide range of solutions for card sale and loading. These solutions range from the most basic, such as a preloaded card, to an ATM with a wide range of payment options, using autonomous terminals or computer software.

Ref Code Credit

CCL-CARD 490012 0 C.

CCL-CARD20 490020 20 C.

CCL-CARD50 490021 50 C.

CCL-CARD90 490022 90 C.

CCL-CARD

Technical features

· Internal memory used to store the user's credit.

· Credit and Kwh storage.

· Can be customised with your company's logo.

CirCarLife RFID HF Proximity cards.

Safe system

Ref Code

CCL-TERM 490013

CCL-TERM

Technical features

· Desktop terminal, can be used to con� gure and top up credit in CirCarlife cards.

Autonomous CirCarlife card topping-up terminal.


5555

CirC

arLi

fe

Ref Code

CCL-SCADA 490052

CirCarLife SCADA

Technical features

· Remote equipment monitoring and parameterisation.

· Display of parameters and the status of devices in real time.

· Records and prints historical logs in table or graph format.

· Multipoint Web server and Built-in XML Server.

· Creation of application access pro� les and users with a user and password.

· Very versatile and easy to use.

· Compatible with OPC software for PS/PSS.

· Alarms module (events).

· Creation of customised screens.

· Optional control actions can be performed on units.

· Report generator and energy bill simulator module, optional emulation of tariffs or hourly periods.

Management and monitoring software.

CCL-SOFT

Technical features

· Assembly composed of PC software and reader, optional credit topping-up with Circarlife cards.

Controller software used to top up cards, with a built-in USB reader.

E8. Management and control softwareCirCarlife Scada represents an integral software solution that focuses on the control and parameterisation of smart electric vehicle charging points and units. Nowadays, companies want centralised control of the whole installation for management and maintenance purposes. CIRCONTROL's CirCarlife Scada software can read the instantaneous values of all CirCarlife units in real time and generate tables and histo-rical logs of data that will be saved in the central processing unit (PC) so that this information can be studied later.

In addition, CirCarlife Scada can download all stored data to units with an internal memory.The user can fully control its charging network, checking information on the installation's status and general consumption in real time. The user can generate custom screens and create alarms, events, reports, tables, etc. with the internal variables of the system.

Ref Code

CCL-SOFT 490014

NEW


56

CirC

arLi

fe

Mode 1

E9. Charging modesThe EV charging process is regulated by the IEC 61851 and IEC 62196 international standards. These standards de� ne the different charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user's safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements.

Technical features

· Standard electrical network connector, non-speci� c for EVs.

· Slow AC charging.

· The installation must be protected with circuit breakers and earth leaka-ge protection elements.

· Maximum 16 A per phase (3.7 kW - 11kW).

Mode 3

Technical features

· Electrical network connector, speci� c for EVs.

· Slow or semi-fast charging in single or three-phase installations.

· Protection elements included in the special infrastructure for EVs.

· Maximum 64 A per phase (14.8 kW - 43 kW).

· Direct connection of the EV to the charging unit.

Mode 4

Technical features

· Electrical network connector, speci� c for EVs.

· Ultra-fast dc charging.

· Charging station, exclusively used for EVs.

· Maximum 400 A per phase (50 kW - 150 kW).

· Control and protection elements installed in the infrastructure.

Technical features

Mode 2

· Standard electrical network connector, non-speci� c for EVs.

· Slow AC charging.

· The installation must be protected with circuit breakers and earth leaka-ge protection elements.

· Maximum 32 A per phase (3.4 kW - 22kW).

· Special cable with an intermediate electronic device, with a control and protection pilot function.


5757

CirC

arLi

fe

Type 1

E10. Types of connectorsThe EV charging process is regulated by the IEC 61851 and IEC 62196 international standards. These standards de� ne the different charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user's safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements.

Technical features

· SAE J1772 Regulation.

· 5 pins (L1, L2/N, PE, CP, CS).

· Maximum 230Vac 32A single-phase (7.3kW).

Technical features

· 7 pins (L1, L2, L3, N, PE, CP, PP).

· Maximum 400Vac 32A three-phase (21kW).

Technical features

· Indirect connection between the EV and DC supply point.

· Control and protection elements installed in the infrastructure.

· 8 pin comunication + 2 Power DC.

Technical features

Type 2

· 7 pins (L1, L2, L3, N, PE, CP, PP).

· Maximum 400Vac 63A three-phase (43kW).

Type 3 Type 4

CirC

arLi

fe


58

CirC

arLi

fe

Diagram for 32 installation points

Diagram with different communication methodDiagram with different communication method

E11. Instalation diagrams

59

CirC

arLi

fe


61

CirF

ire


CirFire SYSTEM

Circontrol, in its desire for growth in the � re sector has added to its pro-duct portfolio, a new range of Fire Detection named CIRFIRE, including the systems conventional, analogue addressable and detection of CO.

The range of products that constitute CirFire family, presents a great quality/price ratio, being appropriate for most installations of the mar-ket, covering from small to large installation. This is a CIRCONTROL cha-llenge to be placed at the forefront of international companies of sector.

CIRCONTROL count with a great human team, formed by engineers from R+D+i, marketing people, technical people and a sales network in many countries, with an extended experience in the security sector. We offer a full collaboration always looking for the best solution for every installation.

The CIRCONTROL’s objective with CirFire range is to cover the needs of its customers, offering a range of carefully selected products, where we can cover totally the installations, offering at any time a product certi-� ed by European Laboratories, and an after-sales quality service.

62

CirF

ire

INDEX

F FIRE AND GAS DETECTION

F1. ANALOGUE ADDRESSABLE SYSTEMS CirFire 64

F2. ANALOGUE ADDRESSABLE REPEATER SYSTEM CirFire 64

F3. ANALOGUE ADDRESSABLE FIRE CONTROL PANELS CONFIGURATION ACCES-SORIES CirFire

65

F4. ANALOGUE ADDRESSABLE DETECTORS ACCESSORIES 200 SERIES CirFire 66

F5. ANALOGUE ADDRESSABLE DETECTORS CirFire 200 SERIES 66

F6. MONITORING AND CONTROL MODULES FA-M400 SERIES 68

F7. ADDRESSABLE MANUAL CALL POINT FA-M400 SERIES 70

F8. ADDRESSABLE LOOP POWERED SIREN FA-M400 SERIES 70

F9. CONVENTIONAL SYSTEMS CirFire 71

F10. CONVENTIONAL SYSTEM ACCESSORIES CirFire 72

F11. CONVENTIONAL DETECTORS ACCESSORIES CirFire SERIE 200 72

F12. CONVENTIONAL DETECTORS CirFire SERIE 200 73

F13. DUCT DETECTORS CirFire 73

F14. LINEAR SMOKE DETECTORS CirFire 74

F15. CONVENTIONAL CALL POINTS CirFire 75

F16. LINEAR OPTICAL DETECTORS CirFire 76

CirFire - Short Form Catalogue 2011-2012

63

CirF

ire

FIRE AND GAS DETECTION

F17. FLAME AND HIGH TEMPERATURE DETECTORS CirFire 77

F18. ASPIRATING LASER DETECTORS ACCESSORIES CirFire 78

F19. ASPIRATING LASER DETECTORS ACCESSORIES CIRFIRE 80

F20. STANDALONE GAS DETECTORS CirFire 81

F21. CONVENTIONAL ALARM SIRENS CirFire 81

F22. VISUAL AND ACOUSTIC WARNINGS SIGNS CirFire 82

F23. ELECTROMAGNETIC RETAINERS CirFire 83

F24. CABLES CirFire 84

F25. BATTERIES CirFire 84

F26. POWER SUPPLIES CirFire 85

F27. DETECTOR TESTER CirFire 85

F28. CO DETECTION SYSTEM CirFire 86

F29. CO DETECTOR CirFire 87

F30. CO SYSTEM ACCESSORIES CirFire 87

F31. FREQUENCY CONVERTER CirFire 88

INDEX

F

64

CirF

ire


F1. ANALOGUE ADDRESSABLE SYSTEMS CirFire

FA-C101 560935

Analogue addressable fire alarm control panel for 1 loop not expandable. Mana-gement up to 250 elements per loop (detectors, modules or call points) with 2-wires te-chnology. Heavy-duty enclosure, automatic search function, 20 fire led display zones, historical register up to 1000 events, same direction elements detection, management and setup software, USB setup port, day/night sensivity setting, 2 monitored sounder outputs, 2 programmable voltage free relays. Fitted in ABS plastic casing with flush wall mount option, Multilanguage keyboard. EN54-2 and EN54-4 compliant and certi-fied. Requires batteries, reference FD-BT1207, not included.

FA-C102 560936

Analogue addressable fire alarm control panel for 2 loops not expandable. Mana-gement up to 250 elements per loop (detectors, modules or call points) with 2-wires te-chnology. Heavy-duty enclosure, automatic search function, 20 fire led display zones, historical register up to 1000 events, same direction elements detection, management and setup software, USB setup port, day/night sensivity setting, 2 monitored sounder outputs, 2 programmable voltage free relays. Fitted in ABS plastic casing with flush wall mount option, Multilanguage keyboard. EN54-2 and EN54-4 compliant and certi-fied. Requires batteries, reference FD-BT1207, not included.

FA-C104 560943 Central de detección de incendio compacta 4 lazos. Permite la gestión de 250 ele-mentos por lazo ya sean detectores, módulos o pulsadores. Función auto-búsqueda, 40 zonas de visualización del fuego mediante leds, registro histórico de hasta 4000 eventos, detección de equipos con misma dirección, software de configuración, puer-to configuración USB, configuración día/noche, 2 salidas de sirenas supervisadas, 2 salidas de relés libres de tensión configurables. Cabina metálica, teclado multilingüe. Certificadas según EN54-2 y EN54-4. Precisa baterías FD-BT1218 no incluidas.

FA-C108 560937 Analogue addressable fire alarm control panel expandable from 1 up to 8 loops. Management up to 250 elements per loop (detectors, modules or call points) with 2-wi-res technology. Heavy-duty enclosure, automatic search function, 20 fire led display zones, historical register up to 1000 events, same direction elements detection, mana-gement and setup software, USB setup port, day/night sensivity setting, 2 monitored sounder outputs, 2 programmable voltage free relays. Fitted in metal deck casing, Multilanguage keyboard. EN54-2 and EN54-4 compliant and certified. Requires batte-ries, reference FD-BT1218, not included.

FA-C108 PLUS 560970 Central de detección de incendio analógica ampliamble de 4 a 8 lazos. Permite la gestión de 250 elementos por lazo ya sean detectores, módulos o pulsadores. Función auto-búsqueda, 40 zonas de visualización del fuego mediante leds, registro histórico de hasta 4000 eventos, detección de equipos con misma dirección, soft-ware de configuración, puerto configuración USB, configuración día/noche, 2 salidas de sirenas supervisadas, 2 salidas de relés libres de tensión configurables. Cabina metálica, teclado multilingüe. Certificadas según EN54-2 y EN54-4. Precisa baterías FD-BT1224 no incluidas.

F2. ANALOGUE ADDRESSABLE REPEATER SYSTEM CirFire

FA-R100 560938 Analogue addressable repeater with 4x40 alphanumeric display, multilanguage keyboard and key. Allows the ring or bus network installation. Compatible with all range of analogue adressable fire alarm control panels FA-C100. Fitted in ABS plastic casing with flush wall mount option. EN54-2 y EN54-4 compliant and certified. Requi-res external 230Vdc power supply and batteries, reference FD-BT1207, not included.

65


CirF

ire

F3. ACCESORIOS CONFIGURACIÓN CENTRALES ANALÓGICAS CirFire

FA-TB100 560961

Expansion card for 2 analogue addressable loops with capacity for up to 250 elements per loop. For FA-C108 and FA-C108 PLUS fire alarm control panels.

FA-RE100 560962

Optional network communications card for FA-C100 control panel and FA-R100 re-peater connection.

FA-TE100 560969

Ethernet communication board to connect FA-C100 addressable panels to the net-work.

FA-SC100 560963

Configuration and programming software for FA-C100 fire systems. Allows up/down-loading the fire panel configuration from/to a PC via USB.

FA-SG100 560964

Graphic Software for FA-C100 fire systems. Allows control, monitoring and manage-ment through the fire installation drawings.

FA-CC100 560965

PC configuration USB cable for FA-C100 fire panels.

FA-PD200 560940

Address programmer for analogue addressable detectors 200 series and modules 400 series. Allows to display the analogue value of the detectors and its consecutive programming.

by Circontrol

FA-TB100

66

CirF

ire


F4. ANALOGUE ADDRESSABLE DETECTORS ACCESSORIES 200 SERIES CirFire

FC-Z200 560901

Fire detector connection base for the whole 200 series detectors. Built-in anti-theft system for the detectors, stainless metallic contacts. Fitted in ABS white plastic casing.

FC-Z200B* 560901B

Fire detector connection base for the whole 200 series detectors. Built-in anti-theft system for the detectors, stainless metallic contacts. Fitted in ABS black plastic casing.

FC-ST200 560915

Assembly spacer for insertion of up to 4 conduits of up to 20 mm. Fitted in white ABS plastic casing. The base FC-Z200 fits on top of this accessory.

FC-ST200B* 560915B

Assembly spacer for insertion of up to 4 conduits of up to 20 mm. Fitted in black ABS plastic casing. The base FC-Z200 fits on top of this accessory.

F5. ANALOGUE ADDRESSABLE DETECTORS CirFire 200 SERIES

FA-DT210 560931

Analogue addressable heat detector (58ºC-8ºC/minute). Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-Z200 like the other detectors in series 200. Not included. EN54-5 approved and CDP cerficate.

FA-DT210B* 560931B

Analogue addressable heat detector (58ºC-8ºC/minute). Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-Z200 like the other detectors in series 200. Not included. EN54-5 approved and CDP cerficate. Black color.

* See delivery time

67


CirF

ire

FA-DT215 560932

Analogue addressable high temperature heat detector (78ºC-8ºC/minute). Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connec-tion base FC-Z200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certificate.

FA-DO220 560933

Analogue addressable optical smoke detector. Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-Z200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certicate.

FA-DO220B* 56933B

Analogue addressable optical smoke detector. Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-Z200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certicate. Black color.

FA-DOT230 560934

Analogue addressable dual heat & smoke detector. Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-Z200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certificate.

* See delivery time

68

CirF

ire


F6. MONITORING AND CONTROL MODULES SERIES CIRFIRE FA-M400

FA-M401 560941

1 supervised technical input addressable module for alarm systems monitoring with NC or NO relay needs. Has one address in the loop that is provided through FA-PD200 progra-mmer. Direct power from the loop and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M402 560942

2 supervised technical input addressable module for alarm systems monitoring with NC or NO relay needs. Has two adresses in the loop that are provided through FA-PD200 programmer. Direct power from the loop and includes built-in led status indicators. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or sur-face mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M411 5609441 potential free relay output addressable module, each relay allows for COMMON, NOR-MALLY OPEN and NORMALLY CLOSED contacts non resettable. Has one address in the loop that is provided through FA-PD200 programmer. Direct power from the loop and inclu-des built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M412 560945

2 potential free relay output addressable module, each relay allows for COMMON, NOR-MALLY OPEN and NORMALLY CLOSED contacts non resettable. Has two addresses in the loop that are provided through FA-PD200 programmer. Direct power from the loop and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower con-sumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M421 560947

Monitoring and Control alarm system addressable module with 1 supervised technical input circuit for alarm systems monitoring with NC or NO relay needs and 1 potential free relay output circuit with a NO/C/NC contact non resettable. Has two addresses in the loop that are provided through FA-PD200 programmer. Direct power from the loop and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 sec-tion. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M422 560948

Monitoring and Control alarm system addressable module with 2 supervised technical input circuits for alarm systems monitoring with NC or NO relay needs and 2 potential free relay output circuits with a NO/C/NC contact non resettable. Has four addresses in the loop that are provided through FA-PD200 programmer. Direct power from the loop and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 sec-tion. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M431 560950

24Vdc powered supervised relay output addressable module, to control the activation of optical-acoustical warnings or switch any other output with power supply needs, discrimi-nating between cut fault and short circuit fault on the line. Has one address in the loop that is provided through FA-PD200 programmer. 24 Vdc external power supply needed and in-cludes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

F6

69


CirF

ire

FA-M432 560951

Two 24Vdc powered supervised relay outputs addressable module, to control the acti-vation of optical-acoustical warnings or switch any other output with power supply needs, discriminating between cut fault and short circuit fault on the line. Has two addresses in the loop that is provided through FA-PD200 programmer. 24 Vdc external power supply nee-ded and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 100 x 20. CPD certificate.

FA-M441 560953

1 zone monitor addressable module to control up to 20 conventional devices and/or 32 call points. Discriminates between alarm from call point and detector. Discriminates bet-ween cut fault and short circuit fault on the zone. Has one address in the loop that is pro-vided through FA-PD200 programmer. 24 Vdc external power supply needed and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 sec-tion. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M442 560954

2 zones monitor addressable module to control up to 20 conventional devices and/or 32 call points per zone. Discriminates between alarm from call point and detector. Discrimina-tes between cut fault and short circuit fault on the zone. Has two addresses in the loop that is provided through FA-PD200 programmer. 24 Vdc external power supply needed and in-cludes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 100 x 20. CPD certificate.

FA-M481 560959

230Vac and 5A voltage free relay output module, each relay allows for NC,NO and C contacts non resettable. Has one address in the loop that is provided through FA-PD200 programmer. Direct power from the loop and includes built-in led status indicator. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower consumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M491 560960

Isolator module for short circuit conditions to protect the analogue loop, with built-in led status indicator. Opens the circuit between two isolators when a break in the line is de-tected. Installation is recommended every 20 detectors or modules. Requires no device address. Direct power from the loop. Wiring through removable terminal blocks up to 2,5 mm2 section. DIN rail mount possibility or surface mount with box FA-M499. Lower con-sumption of 300µA idle. Dimensions 100 x 82 x 23. CPD certificate.

FA-M499 560966 Surface mount watertight box for FA-M400 series modules. DIN rail mount possibility.

F6

70

CirF

ire


F7. ADDRESSABLE MANUAL CALL POINT FA-M400 SERIES

FA-M451 560956

Analogue addressable resettable call point with local key test facility, has an address of the loop and gets power supply directly from it. Built in status led indicator. Surface mount, red colour. CPD certificate.

FD-TB20 560284

Hinged transparent swinging plastic protection cover for call points FA-M451 series.

FD-ME20 560283

Flush mount accessory for the resettable call point FA-M451 series.

F8. ADDRESSABLE LOOP POWERED SIREN FA-M400 SERIES

FA-M461 560957

Addressable loop powered siren with direct connection to the loop. 24V powered directly from the loop, low current consumption up to 95 dB sound output. Has an address on the loop. Low current consumption siren 24 Vdc / 5 mA, red color for indoor use. Up to 87,5 dB sound output. CDP certificate.

FA-M462 560967

Addressable loop powered siren with flash and direct connection to the loop. 24V powe-red directly from the loop, low current consumption. Up to 95 dB sound output. Has an address on the loop. Red colour for indoor use. CPD certificate.

71


CirF

ire

F9. CONVENTIONAL SYSTEM CirFire

FC-C102 560906

Conventional fire alarm panel for 2 zones fitted in ABS plastic casing. Flush mount option. It allows you to monitor all ranges of conventional detectors both produced by Circontrol and by the majority of the market. It can discriminate between alarms set off by a detector and by a call point. It has two adjustable supervised siren outputs (1A maximum consumption between both), alarm and fault outputs through voltage free relay, 24 V auxiliary output (500 mA maximum consumption), 24 V resettable output (500 mA maximum consumption) and exterior input. Permits 3 expansion cards, voltage free relays, of supervised sirens and communications (Ethernet, Contact ID) allowing connection to the alarm receptor station. Visual-acoustic indications by area. Multilingual keyboard. Certificated according to stan-dards EN54-2 and EN54-4. Dimensions: 439x268x112 mm. Requires 2 batteries, reference FD-BT1202 or FD-BT1207, not included.

FC-C104 560907

Conventional fire alarm panel for 4 zones fitted in ABS plastic casing. Flush mount option. It allows you to monitor all ranges of conventional detectors both produced by Circontrol and by the majority of the market. It can discriminate between alarms set off by a detector and by a call point. It has two adjustable supervised siren outputs (1A maximum consumption between both), alarm and fault outputs through voltage free relay, 24 V auxiliary output (500 mA maximum consumption), 24 V resettable output (500 mA maximum consumption) and exterior input. Permits 3 expansion cards, voltage free relays, of supervised sirens and communications (Ethernet, Contact ID) allowing connection to the alarm receptor station. Visual-acoustic indications by area. Multilingual keyboard. Certificated according to stan-dards EN54-2 and EN54-4. Dimensions: 439x268x112 mm. Requires 2 batteries, reference FD-BT1202 or FD-BT1207, not included.

FC-C108 560908

Conventional fire alarm panel for 8 zones fitted in ABS plastic casing. Flush mount option. It allows you to monitor all ranges of conventional detectors both produced by Circontrol and by the majority of the market. It can discriminate between alarms set off by a detector and by a call point. It has two adjustable supervised siren outputs (1A maximum consumption between both), alarm and fault outputs through voltage free relay, 24 V auxiliary output (500 mA maximum consumption), 24 V resettable output (500 mA maximum consumption) and exterior input. Permits 3 expansion cards, voltage free relays, of supervised sirens and communications (Ethernet, Contact ID) allowing connection to the alarm receptor station. Visual-acoustic indications by area. Multilingual keyboard.Certificated according to stan-dards EN54-2 and EN54-4. Dimensions: 439x268x112 mm. Requires 2 batteries, reference FD-BT1202 or FD-BT1207, not included.

FC-C112 560909

Conventional fire alarm panel for 12 zones fitted in ABS plastic casing. Flush mount op-tion. It allows you to monitor all ranges of conventional detectors both produced by Circontrol and by the majority of the market. It can discriminate between alarms set off by a detector and by a call point. It has two adjustable supervised siren outputs (1A maximum consump-tion between both), alarm and fault outputs through voltage free relay, 24 V auxiliary output (500 mA maximum consumption), 24 V resettable output (500 mA maximum consumption) and exterior input. Permits 3 expansion cards, voltage free relays, of supervised sirens and communications (Ethernet, Contact ID) allowing connection to the alarm receptor station. Visual-acoustic indications by area. Multilingual keyboard. Certificated according to stan-dards EN54-2 and EN54-4. Dimensions: 439x268x112 mm. Requires 2 batteries, reference FD-BT1207, not included.

72

CirF

ire


F10. CONVENTIONAL CENTRAL UNITS ACCESSORIES CirFire

FC-TR100 560911

Expansion card with 4 voltage free relay outputs for conventional FC-C100 series sys-tems.

FC-TS100 560912

Expansion card with 4 supervised siren outputs, for conventional FC-C100 series sys-tems, allowing four independent outputs for sirens.

F11. CONVENTIONAL DETECTORS ACCESSORIES CirFire SERIE 200

FC-Z200 560901 Fire detector connection base for the whole 200 series detectors. Built-in anti-theft system for the detectors, stainless metallic contacts. Fitted in ABS white plastic casing.

FC-Z200B* 560901B Fire detector connection base for the whole 200 series detectors. Built-in anti-theft system for the detectors, stainless metallic contacts. Fitted in ABS black plastic casing.

FC-ST200 560915 Assembly spacer for insertion of up to 4 conduits of up to 20 mm. Fitted in white ABS plastic casing. The base FC-Z200 fits on top of this accessory.

FC-ST200B* 560915B Assembly spacer for insertion of up to 4 conduits of up to 20 mm. Fitted in black ABS plastic casing. The base FC-Z200 fits on top of this accessory.

FC-KEY-C 560995 Spare key for FC- C100 series stations

73


CirF

ire

F12. CONVENTIONAL DETECTORS CirFire 200 SERIES

FC-DT210 560902 Conventional heat detector (58ºC-8ºC/minute). Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-ZC200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certified. Fitted in ABS white plastic casing.

FC-DT210B* 560902B Conventional heat detector (58ºC-8ºC/minute). Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-ZC200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certified. Fitted in ABS black plastic casing.

FC-DT215 560903 Conventional high temperature heat detector (78ºC-8ºC/minute). Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-ZC200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certified.

FC-DO220 560904 Conventional optical smoke detector. Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-ZC200 like the other detec-tors in series 200. Not included. EN54-5 approved and CPD certified. Fitted in ABS white plastic casing.

FC-DO220B* 560904B Conventional optical smoke detector. Built-in LEDs indicators, output for remote indicator connection and anti-theft system. Requires connection base FC-ZC200 like the other detec-tors in series 200. Not included. EN54-5 approved and CPD certified. Fitted in ABS black plastic casing.

FC-DOT230 560905 Conventional dual heat & smoke detector. Built-in LEDs indicators, output for remote indi-cator connection and anti-theft system. Requires connection base FC-ZC200 like the other detectors in series 200. Not included. EN54-5 approved and CPD certified.

F13. DUCT DETECTOR CirFire

FD-DC700* 560300

Camera for ventilation duct detectors installation. Compatible with all conventional and addressable Cirfire detectors. IP54. Not includes detector and basement. Sampling pipe length: 600mm. Dimensions: 180x253x183mm.

FD-TC700* 560301

Pipe for the duct detector FD-DC700, 1,5 meters length for big size ducts.

FD-BM700 * 560302

Mounting arm for irregular ducts.

* See delivery time

74

CirF

ire


F14. LINEAR SMOKE DETECTORS CirFire

FD-DL50 560310

Infrared beam smoke detector that reflects the light in a mirror, with a maximum coverage of 50 x 15 metres, for installations with very high ceilings. Requires external power supply of 12 to 24 Vdc. Maximum consumption 15mA. VDS and CPD certified.

FD-DL100 560311

Infrared beam smoke detector that reflects the light in a mirror, with a maximum coverage of 100 x 15 metres, for installations with very high ceilings. Requires external power supply of 12 to 24 Vdc. Maximum consumption 15mA. VDS and CPD certified.

FD-DLA50 560313

Self aligning linear infrared smoke detector with a maximum coverage 50 x 15 metres. Power supply 24 Vdc Maximum consumption: 50 mA. Working temperature: -20ºC to 55ºC. IP54. Dimensions and weight of the detector: 135x135x135 mm and 0.5 kg. Dimensions and weight of the controller: 200x235x71 mm and 0.9 kg. Dimensions and weight of the reflector: 100x100x9.5 mm and 0.07 kg. CPD certified.

FD-DLA100 560314

Self aligning linear infrared smoke detector with a maximum coverage from 50 to 100 x 15 metres. Power supply 24 Vdc Maximum consumption: 50 mA. Working temperature: -20ºC to 55ºC. IP54. Dimensions and weight of the detector: 135x135x135 mm and 0.5 kg. Dimen-sions and weight of the controller: 200x235x71 mm and 0.9 kg. Dimensions and weight of the reflector: 100x100x9.5 mm and 0.07 kg. CPD certified.

FD-CD 560875

Additional detector head for infrared linear smoke detectors FD-DLA series. Trasmitter and reciever in one head, including micromotors for aligning and basement. Coverage from 8 to 50 m. Catadioptric mirror included. Protection IP50. Power supply from 14 to 28 Vdc. CPD Certified.

FD-ES 560876

Additional reflecting mirror for linear smoke detectors FD-DL/FD-DLA series.

75


CirF

ire

F15. CONVENTIONAL CALL POINTS CirFire

FD-P20

560280 Red resettable call point, with test key facility, surface mounting, includes resistance of 100 Ohm - 2W.

FD-PW20

560285 Red resettable IP67 call point, with test key facility, surface mounting, includes resistance of 100 Ohm - 2W. Dimensions 98 x 98 x 47 mm.

FD-PP20

560281 Blue resettable call point, extinction stop, surface mounting, with test key facility. Includes resistance of 100 Ohm - 2W.

FD-PPW20

560286 Blue resettable IP67 call point, extinction stop, surface mounting, with test key facility. In-cludes resistance of 100 Ohm - 2W. Dimensions 98 x 98 x 47 mm.

FD-PD20

560282 Yellow resettable call point, extinction activation, surface mounting, with test key facility. Includes resistance of 100 Ohm - 2W.

FD-PDW20

560287 Yellow resettable IP67 call point, extinction activation, surface mounting, with test key faci-lity. Includes resistance of 100 Ohm - 2W. Dimensions 98 x 98 x 47 mm.

FD-TB20

560284 Hinged transparent swinging plastic protection cover for call points FD-P20 series.

FD-ME20

560283 Flush mount accessory for the resettable manual call point FD-P20 series.

FD-KEY-P 560995 Spare key for resettable button.

76

CirF

ire


F16. LINEAR OPTICAL DETECTORS CirFire

FD-BO-10 560921 Optical receiver - 7º range, 24 V



FD-EBO BAT 560924 Transmitter - Power supply: 24 V per Battery

FD-EBO 560925 Transmitter - Power supply: 24 V

FD-EBO AP 560926 High-power transmitter: 24 V

FD-KITBO INST 560927 Installation kit for FD-BO series equipment

77


CirF

ire

F17. FLAME AND HIGH TEMPERATURE DETECTORS

FD-DTA 560340 Thermal/thermovelocimetric detector, NA / NC contact with 4 output cables. Certified for explosive atmospheres.

FD-DLL10 560341 UV (ultra violet) flame detector with CPD EN54-10 certificate. Incorporates micropro-cessor to analyse flame signal, with adjustable multiple alarm levels and manual testing. Alarm and breakdown relay output and optional analogue output of 4-20 mA and Modbus protocol for RS-485.

FD-DLL11 560342 UV (ultraviolet) and IR (infrared) flame detector with CPD EN54-10 certificate. Detects fires from inflammable materials based on hydrocarbon, hydroxide and hydrogen, metal and inorganic materials. Incorporates microprocessor to analyse flame signal, with adjus-table multiple alarm levels. Mounted in fireproof aluminium casing. Alarm and breakdown relay output and optional analogue output of 4-20 mA and Modbus protocol for RS-485.

FD-DLL12 560343 IR3 flame detector (triple infrared) . TRIPLE IR (infrared) flame detector with CPD EN54-10 certificate. Able to detect fire from gasoline containers at a distance from 0.1 m2 to 65 m in under 5 seconds. Incorporates microprocessor to analyse flame signal, with adjustable multiple alarm levels. Mounted in fireproof aluminium casing. Includes alarm, auxiliary and breakdown relay output and 4-20 mA analogue output. Includes heated win-dow to prevent condensation.

FD-DLL13 560344 IR (infrared) flame detector with CPD EN54-10 certificate. Incorporates microprocessor to analyse flame signal, with adjustable multiple alarm levels and manual testing. Detects fire from hydrocarbon fuels and gas fire using an advanced flame analysis system. Alarm and breakdown relay output and optional analogue output of 4-20 mA and Modbus proto-col for RS-485.

78

CirF

ire


F18. ASPIRATING LASER DETECTORS CirFire

FD-DA700 560333 Aspiration Laser Detector of high sensitivity. Dynamic range of 0.005% to 20% obscuration per meter. Two pipe inputs of 25mm (FD-T25) of 100 meters length, to a detection zone. Four programmable alarm levels (Alert, Action and 2 fire levels) with its corresponding voltage free re-lay outputs to perform the maneuvers required. Power supply 24 Vdc / 1A. Ethernet connection is available for web configuration.

FD-DA701 560334 Highly sensitive laser aspiration detector. Dynamic range of 0.005% to 20% of darkening per metre. Tube inlet of 25 mm (FD-T25), 100 m long, for detection zone. 1 programmable alarm level (Alert, action, 2 fire) with voltage-free relay for any appropriate measures. High pressure turbine of 2,000 Pa, adjustable on site. Requires 24 V DC power supply (1 A). Ether-net connection available (optional).

FD-DA701D 560877 Same characteristics as FD-DA701. With Display

FD-DA704 560870 Aspiration Laser Detector of high sensitivity. Dynamic range of 0.005% to 20% obscu-ration per meter. Four pipe inputs of 25mm (FD-T25) of 100 meters length, to a detection zone. Four programmable alarm levels (Alert, Action and 2 fire levels) with its correspon-ding voltage free relay outputs to perform the maneuvers required. High pressure turbine of 2.000 Pascals field adjustable. Power supply 24 Vdc / 1A. Ethernet connection avaliable (optional).


FD-DA706 560871 Aspiration Laser Detector of high sensitivity. Dynamic range of 0.005% to 20% obscura-tion per meter. Six pipe inputs of 25mm (FD-T25) of 100 meters length, to a detection zone. Four programmable alarm levels (Alert, Action and 2 fire levels) with its corresponding vol-tage free relay outputs to perform the maneuvers required. High pressure turbine of 2.000 Pascals field adjustable. Power supply 24 Vdc / 1A. Ethernet connection avaliable (optional).


FD-DA715 560872 Aspiration Laser Detector of high sensitivity. Dynamic range of 0.005% to 20% obscura-tion per meter. Fifteen detection zones through fiftteen micro ducts of 50 meters each one. Four programmable alarm levels (Alert, Action and 2 fire levels) with its corresponding vol-tage free relay outputs to perform the maneuvers required. High pressure turbine of 2.000 Pascals field adjustable. Power supply 24 Vdc / 1A. Ethernet connection avaliable (optional).

FD-DA715D 560880 Same characteristics as FD-DA715. Class A,B,C.

FD-DA710 560335 Aspiration detector, with analysis camera with up to 2 smoke detectors in the CIR-CONTROL 200 series. Samples air in the zone to be controlled and enables detection by redundancy. Tubing of up 100 m long. Supervised air flow. IP50 casing. Dimensions: 254x180x165mm. Power supply 24 V DC. Consumption 460 mA. Exchangeable filter. CPD certified in accordance with EN54-20 Standard. Baseboards and detectors not included.

79


CirF

ire

FD-DA711 560336

Two-channel aspiration detector, with two analysis cameras with up to 2 smoke de-tectors in the CIRCONTROL 200 series. Samples air in the zone to be controlled and enables detection by redundancy. Tubing of up 100 m long. Supervised air flow. IP50 casing. Dimensions: 254x180x165mm. Power supply 24 V DC. Consumption 460 mA. Exchangeable filter. CPD certified in accordance with EN54-20 Standard. Baseboards and detectors not included.

FD-DA712 560337

Aspiration detector, with analysis camera and smoke detector with laser camera for early smoke detection. Tubing of up 50 m long. Supervised air flow. IP50 casing. Dimensions: 254x180x165mm. Power supply 24 V DC. Consumption 460 mA. Exchangeable filter. CPD certified in accordance with EN54-20 Standard.

FD-DA713 560338

Aspiration detector, with analysis camera and two smoke detectors with laser camera for early smoke detection. Samples air in zone to be controlled. Tubing of up 50 m long. Supervised air flow. IP50 casing. Dimensions: 254x180x165mm. Power supply 24 V DC. Consumption 460 mA. Exchangeable filter. CPD certified in accordance with EN54-20 Standard.

80

CirF

ire


FD-U25 560851

Straight union for 25 mm pipes.

FD-C90/25 560852

90 degrees elbow for 25 mm pipes.

FD-C45/25 560853

45 degrees elbow for 25 mm pipes.

FD-TF25 560854

End cap for 25 mm pipe.

FD-UN25 560855

Straight union for 25 mm pipes with screw.

FD-A25 560856

25 mm clamp. Bags of 50 units.

FD-BC25 560857

8 mm bifurcation capillar for 25 mm pipe.

FD-TC25 560858

8 mm capillary pipe, 100m.

F19. ASPIRATING LASER DETECTORS ACCESSORIES CirFire

FD-T25 560850

25mm pipe, red color, 3 meters.

81


CirF

ire

FD-PMC25 560860

Conical sampling point.

FD-UT25 560861

Conical sampling point.

F20. STANDALONE GAS DETECTORS CirFire

FD-DG024 560325

Gas detector with catalytic sensor calibrated to LPG (Licuated Petrol Gas), compo-sed of Prophane, Methane or a mixture from both. Power supply: 12-24 Vdc. Consump-tion: 150 mA. Built in fault led and relay outputs. Dimensions: 75x155x42 mm.

FD-DG230 560326

Gas detector with catalytic sensor calibrated to LPG (Licuated Petrol Gas), com-posed of Prophane, Methane or a mixture from both. Power supply: 230 Vac. Consump-tion: 40 mA. Built in fault led and relay outputs. Dimensions: 75x155x42 mm.

F21. CONVENTIONAL SIRENS CirFire

FD-CC10 560400

6” alarm bell, low energy consumption, 24 Vdc / 11 mA, red, for indoor use. Maximum acoustic power 94 dB.

FD-SI15 560407

Low consumption alarm siren 24 Vcc / 5 mA, red color for indoor use. Up to 87,5 dB sound output.

FD-SI30 560401

Low consumption alarm siren, 24 Vdc / 7 mA, 32 tones, for indoor use. Acoustic power: More than 100 dB.

FD-PMP25 560859

Flat sampling point.

82

CirF

ire


FD-SI25 560408

Low-consumption alarm siren. Consumption: 24 V / 15 mA, for indoor use, with flashing light. Maximum acoustic power of 90 dB. Dimensions: 69.6 x 92 mm

FD-SI20 560402

Low consumption alarm siren, 24 Vdc / 30 mA, 32 tones, for indoor use, with flashing light. Up to 112dB acoustic power. Dimensions: 80xØ92 mm.

FD-BS25 560406

IP66 transformation base for FD-SI15/20/30

FD-SI40 560403

Two-tone alarm siren, 24 V 200 mA, with FIRE sign, red, flashing, especially for outdoor use. Polycarbonate housing. Dimensions: 297x210x75 mm.

F22. VISUAL AND ACOUSTIC WARNINGS SIGNS CirFire

FD-PA45 560404

Action warning light, very low consumption, high luminosity, for direct connection to conventional and analogue addressable fire detectors, with three LEDs indicators. Dimen-sions: 80x80x42 mm.

FD-PE50 560411

Polycarbonate strobe light at 24Vdc / 35mA for indoor or outdoor use. Black basement and red glass.

FD-PE60 560412

Polycarbonate strobe light at 24Vdc / 35mA for indoor or outdoor use. Black basement and blue glass.

FD-PE70 560413

Polycarbonate strobe light at 24Vdc / 35mA for indoor or outdoor use. Black basement and amber glass.

FD-RL90 560405

Iluminated extinguishing waring sign 24V powered.

FD-SI25 560408

FD-SI20 560402

FD-RL90

83


CirF

ire

F23. ELECTROMAGNETIC RETAINERS CirFire

FD-RE100 560500

Electromagnetic retainer for surface mount with manual relaease button integrated. Force N: 400N. Power supply: 24Vcc / 67mA. Magnet IP54, retainer IP42. With moun-ting plate and inverse-polarity protection included. Size: 110x85x38mm.

FD-RE110 560501

Electromagnetic retainer for surface mount. Force N: 400N. Power supply: 24Vcc / 67mA. Magnet IP54, retainer IP42. With mounting plate and inverse-polarity protection included. Size: 55x55x33mm.

FD-RE120 560503

Electromagnetic retainer for flush mount. Force N: 400N. Power supply: 24Vcc / 67mA. Magnet IP54, retainer IP42. With mounting plate and inverse-polarity protection included. Size: 85x85x35mm.

FD-RE130 560504

Electromagnetic retainer for wall mount with manual relaease button integrated. For-ce N: 400N. Power supply: 24Vcc / 67mA. Magnet IP54, retainer IP42. With mounting plate and inverse-polarity protection included. Size: 70x70x65m.

FD-RE140 560509

Electromagnetic retainer for floor mount with manual relaease button integrated. For-ce N: 400N. Power supply: 24Vcc / 67mA. Magnet IP54, retainer IP42. With mounting plate and inverse-polarity protection included. Size: 128x95x91mm.

FD-RE150 560515Electromagnetic retainer for floor, ceiling or wall mount with manual relaease button integrated. The customer can easily turn the anodized aluminium swivel head from wall to floor resp. ceiling mounting. The tube can be shortened to 110 resp. 145 mm so that almost all distances between door and wall can be bridged. Force N: 400N. Power supply: 24Vcc / 67mA. Magnet IP54, retainer IP42. With mounting plate and inverse-polarity protection included. Size: 90x80x150mm with 90 degree or 90x80x175mm with 180º.

FD-RE160/150 560516

Floor or wall mount bracket for retainers FD-RE100 series. Length 150mm.

FD-RE160/300 560517

Floor or wall mount bracket for retainers FD-RE100 series. Length 300mm.

84

CirF

ire


F24. CABLES CirFire

FD-K2 560600

Twisted fire alarm wire of 2 x 1,5 mm2 (halogen free).No flame spreader. Supplied in 100 meters rolls. Temperature range: -20ºC to 85ºC.

FD-K2A 560601

Fire alarm wire with protection and halogen free shield red/black of 3 x 1,5 mm2. Twisted and shielded. No flame spreader. Supplied in 100 meters rolls. Temperature range: -20ºC to 85ºC.

FD-K4A 560602

Fire alarm wire with protection and halogen free shield of 4 x 1,5 mm2 (red). Twisted and shielded. No flame spreader. Supplied in 100 meters rolls. Temperature range: -20ºC to 85ºC.

FD-KRF 560604

Fire alarm wire (fire resistant) 2 x 1,5 mm2 (red). Twisted and shielded. Fire resistant RF90. Supplied in 100 meters rolls. Temperature range: -20ºC to 85ºC.

F25. BATTERIES CirFire

FD-BT1202 560610

Sealed lead battery 12 Vdc 2.3 A.

FD-BT1207 560611

Sealed lead battery 12 Vdc 7,2 A.

FD-BT1218 560612

Sealed lead battery 12 Vdc 18 A.

FD-BT1224 560613

Sealed lead battery 12 Vdc 24 A.

85


CirF

ire

F26. POWER SUPPLIES CirFire

FT-FA902 560981

Power supply, 24Vdc 2 A, with battery charger, fuse protected 24 V output. Conforms to EN-54-4. Mounted in metal box. It has a fault relay that is energised at rest and LEDs indicating the state of the batteries, network input, fuses, and earthing connection. Requires two FD-BT1207 batteries (NOT INCLUDED). Dimensions 315 x 325 x 91.

FT-FA905 560982

Power supply, 24Vdc 5 A, with battery charger, fuse protected 24 V output. Conforms to EN-54-4. Mounted in metal box. It has a fault relay that is energised at rest and LEDs indicating the state of the batteries, network input, fuses, and earthing connection. Requires two FD-BT1207 batteries (NOT INCLUDED). Dimensions 315 x 325 x 91.

F27. DETECTOR TESTERS CirFire

FD-TS800 560631

Smoke detector tester aerosol.

FD-TS805 560632

Carbon monoxide detector tester aerosol.

FD-TS810 560625

Smoke tester kit up to 4 meters. Composed of smoke detectors tester FD-TS825 and telescopic element of 2,5 meters.

FD-TS815 560627

Universal extraction tool.

FD-TS820 560626

Wireless tester for heat detectors.

86

CirF

ire


FD-TS825 560628

Smoke detector tester.

FD-TS830 560629

Fiberglass telescopic pole of 4,5 meters.

FD-TS835 560630

Prolongation fiberglass telescopic pole of 1,2 meters.

F28. CO DETECTION SYSTEM CirFire

FM-C501 560972

One-zone CO detection control panel, expandable to 3 with module FM-M509, fitted in ABS plastic casing, with flush mount option. Each module allows connection of up to 32 detectors connected to 2 wires without polarity, with a maximum distance of 1 km. The system has three programmable level relays, extraction 1, extraction 2 and alarm. The relays can be configured to be activated with a fault. The system of algorithms has two operation types, standard or by line sensing. The system has a test mode for main-taining the installation. Optionally, the system can incorporate the cards FM-TC500 or FM-TC501, which allow you to control a speed regulator connected to a motor, making energy savings. Dimensions 439 x 268 x 112.

FM-C502 560973

Two-zone CO detection control panel, expandable to 3 with module FM-M509, fitted in ABS plastic casing, with flush mount option. Each module allows connection of up to 32 detectors connected to 2 wires without polarity, with a maximum distance of 1 km. The system has three programmable level relays, extraction 1,extraction 2 and alarm. The relays can be configured to be activated with a fault. The system of algorithms has two operation types, standard or by line sensing. The system has a test mode for main-taining the installation. Optionally, the system can incorporate the cards FM-TC500 or FM-TC501, which allow you to control a speed regulator connected to a motor, making energy savings. Dimensions 439 x 268 x 112.

FM-C503 560974

Three-zone CO detection control panel, fitted in ABS plastic casing, with flush mount option. Each module allows connection of up to 32 detectors connected to 2 wires wi-thout polarity, with a maximum distance of 1 km. The system has three programmable level relays, extraction 1,extraction 2 and alarm. The relays can be configured to be activated with a fault. The system of algorithms has two operation types, standard or by line sensing. The system has a test mode for maintaining the installation. Optiona-lly, the system can incorporate the cards FM-TC500 or FM-TC501, which allow you to control a speed regulator connected to a motor, making energy savings. Dimensions 439 x 268 x 112.

87


CirF

ire

FM-M509 560975 CO module for expanding the system. Each module allows connection of up to 32 detec-tors connected to 2 wires without polarity, with a maximum distance of 1 km.

F29. CO DETECTOR CIRFIRE

FM-D500 560971

Electrochemical carbon monoxide detector with base and spacer for pipe sight inclu-ded. Connection to 2 wires without polarity. Designed for installation on ceilings. Certified according to standard UNE 23300:1984.

FM-DP500 560978

Carbon monoxide detector with electrochemical cell. Designed for installation on pi-llars or walls. Connection to 2 wires without polarity. Certified according to standard UNE 23300:1984.

F30. CO SYSTEM ACCESSORIES CIRFIRE

FM-TC500 560976

Card for connecting up to 3 speed regulators to control their corresponding motors and obtain optimum performance of the extraction motor, saving on the electricity con-sumption.

FM-TC501 560977

Card for connecting up to 3 speed regulators to control their corresponding motors and obtain optimum performance of the extraction motor, saving on the electricity con-sumption. Also includes remote connection via Ethernet, allowing programming, remote management and telemaintenance of the installation.

FA-SG100 PLUS 560968

SCADA management system software. Realtime information of gas concentration at the each panel, module on sensor. Relay activation triggered under specific alarm configura-tion. Remote maintenance. Limited to 200 spaces.

88

CirF

ire

F31. FREQUENCY CONVERTER CirFire

SINGLEPHASE ENERGYFrequency converter for triphasic motors 230V.CIRCONTROL series converters are suitable for the variation of speed through voltage and frequency ventilation by helical and centrifugal triphasic motors 230V.Energy converter: Monophasic 230V. 50/60 Hz.

TYPE CODE A KW CV

FM-V05M 560650 2,5 0,37 0,5

FM-V2M 560657 8 1,5 2

TRIPHASE ENERGYFrequency converter for triphasic motors of 400VCIRCONTROL series converters are suitable for the variation of speed through voltage and frequency ventilation by helical and centrifugal triphasic motors 400V Energy converter: Triphasic 400V. 50/60 Hz.

Note: The converter is selected in function of extraction engine capacity.

TYPE CODE A KW CV

FM-V1T 560652 2,5 0,75 1

FM-V5T 560653 9 4 5,5

FM-V10T 560654 16 7,5 10

FM-V20T 560655 30 15 20

89

CirF

ire


91

CirA

cces

s

Note: LF: 125 KHz, HF: 13.56 MHz (Mifare)*Check availability

ACCESS AND TIME & ATTENDANCE CONTROL SYSTEM

The CirAccess line includes a wide range of products developed in-house using RFID technology, biometrics and license plate recognition to cover the needs of any access control, time attendance and identi� cation insta-llation and pre-payment systems.

These products are designed to provide solutions for all types of insta-llations, either using powerful third-party software included in this equi-pment or using standard applications, thereby allowing quick and easy installation.

The installation of access control systems allows the protection of installa-tions and of con� dential information (employees, suppliers, R&D projects, etc.).

Controlling these � les is mandatory in accordance with the data protection law.


92

CirA

cces

s


INDEX

A ACCESS AND ATTENDANCE CONTROL SYSTEMS

A1. ACCESS AND ATTENDANCE (WORKING HOURS) CONTROL SYSTEMS IN TC/IP NETWORK WITH CENTRALISED SOFTWARE

99

A1.1 SECURE ACCESS NET (RFID proximity and radio frequency identifi-cation)

99

A1.2 PICK 800 (RFID proximity identification) 105

A1.3 LPR-PARK (Licence plate recognition) 108

A1.4 CAS SYSTEM 110

A2. WIRELESS ACCESS CONTROL SYSTEM WITH MANAGEMENT SOFT-WARE

115

A3. AUTONOMOUS ACCESS CONTROL TERMINALS (WITHOUT COMMUNICA-TION AND SOFTWARE)

118

A3.1 DNI SECURE ACCESS (RFID proximity and radio frequency identifica-tion)

119

A3.2 BELLBOX 121

A3.4 KEYBOARD (PIN identification) 122

SECURE ACCESS NET (RFID proximity and radio frequency identifi-New

CirAccess - Short from catalogue 2012

A4. MULTI-PURPOSE RFID KIT FOR SYSTEM AND DEVICE ACTIVATION 123

A5. ADD-ONS AND ACCESSORIES 125

A5.1 RFID identification elements (cards, key rings, bracelets, radio control, "hands free" remote control, etc.)

125

A5.2 Power supplie 127

DNI SECURE ACCESS (RFID proximity and radio frequency identifica-New

9393


CirA

cces

s

Access and time & attendance control systems“General concept”


94

CirA

cces

s


Access and time & attendance control systems“A quality solution for every need”

9595


CirA

cces

s

Access and time & attendance control systems

What is an access control for?

Access control is becoming increasingly necessary in today’s competitive and aggressive society to provide security to the people who work or live in a place, to protect confidential in-formation and the knowledge of a business (know-how), to restrict access to files and personal databases (in accordance with data protection law that is mandatory - LOPD) preventing its loss or theft, ensure the integrity of buildings, property, faci-lities and their contents (IT material, multimedia, laboratories, warehouses, etc.).An access control is not only physical (doors, barriers or turns-tiles) but can also be computer-based, in other words, it ma-nages the access to the IT system, files, programs and data in digital format. It may be of interest to some organisations to also have this type of control (access rights configurable by computer, user, working hours, etc.) as well as an activity history in order to be able to trace back if necessary, all of this combined with the physical access control, using the same means of identification for both.

And also attendance control?

On the other hand, attendance (working hours) control of the employees, to record the hours worked and late arrivals, redu-ces absenteeism and unpunctuality, improving company pro-ductivity and profitability (ROE). This is now as necessary in a large organisation as it is in any other business with a smaller turnover (businesses, offices, factories, workshops, etc.). The greatest asset and the most significant expense of any com-pany is its workforce.These are solutions to different problems (security and human resources), and therefore only one of the two is usually imple-mented or this is done independently. However, in the event that they converge, the system must allow for all the informa-tion to be centralised in a single database, while still making it possible to manage each system independently and in a de-centralised manner.

In a network yes, but how?

To confer the utmost security and reliability to the operation of the entire system, the network controller must offer the possibi-lity of working in online mode (in the event that there is a guard or supervisor) and in offline mode, in which each controller acts in an automatic and independent manner on its accesses according to the parameters configured in its memory and it saves the records (events) to be subsequently transferred into the central database. In the event of offline operation, it is most important to take different factors of the controller into account: its capacity for users, its events memory and its fully indepen-dent control of each access that depends on it.


The software links it all.

The management software is what is going to enable the end user of the system to have full, simple and effective control of all the required functionalities (monitoring, events search, registering of users, configuration of access rights, the im-porting of external databases, data backup and restoration, etc.). It is important that it allows for client and client-server architecture that offers centralised management at remo-te sites, or otherwise distributed management (with multi-station computers with a central database on the server). It must also be able to grow if user requirements increase, and so a good solution is software with combinable modules that can be activated as necessary to add new identification mo-des and even with the possibility of access and attendance (working hours) control in a single database.

Open hardware: A great added value.

In conclusion, it must be mentioned that an access control system must allow fast and easy integration by other com-panies specialising in software development or integrators, providing them with the necessary IT tools and technical su-pport.

96

CirA

cces

s


GENERAL TABLE OF PRODUCT SELECTION (ACCESS AND ATTENDANCE CONTROL)

Product Functio-nality (*)

Type of System

Man

agem

ent s

oftw

are

No. of accesses Number Users

Number Events

Comu-nication with PC

TC

P/IP

US

B

Acc

ess

Atte

ndan

ce

In n

etw

ork

Aut

onom

ous

Har

dwar

e (*

*)

Sof

twar

e

Har

dwar

e

Sof

twar

e

Har

dwar

e

Sof

twar

e

SECURE ACCESS NET - - 2 unlimited 20.000 unlimited 1.000 unlimited -

SECURE ACCESS NET OEM

- - 2 unlimited 20.000 unlimited 1.000 unlimited -

CIRPASS - - 1 512 - unlimited 2.500 unlimited -

PICK 800 - - - - - -10.000 unlimited -

PICK 800HF - - - - - -10.000 unlimited -

LPR-PARK - - 1 unlimited - unlimited - unlimited -

KIT DNI 1-PI LF - - - 2 - 500 - - - - -

KIT DNI 2-PI - - - 2 - 500 - - - - -

KIT DNI 2-PE - - - 2 - 500 - - - - -

KIT DNI 2-PG - - - 2 - 500 - - - - -

KIT DNI 1-PI HF - - - 2 - 500 - - - - -

TA-LS - - - 1 - 200 - - - - -

KIT BELLBOX 1 PI - - - 1 - 24 - - - - -

KIT BELLBOX 1 PG - - - 1 - 24 - - - - -

97

CirA

cces

s


Dis

play

Access Method Type of powe supply (**)R

FID

125

KH

zpo

r un

idad

RF

ID 1

3.56

K

Hz

prox

imid

ad

RF

ID M

ando

Rad

io 8

68 M

Hz

Key

pad

LP

R

1,5

V B

atte

ries

12 V

cc (

***)

12 V

ca

24 V

cc

24 V

ca

230

Vca

(*) May require extra management software (**) May require an extra reader(***) Includes power source (excepting: Secure Access Net OEM and TA-LS)

- - - - - - -

- - - - - - -

- - - - - - - - - -

- - - - - - - - -

- - - - - - - -

- - - - - - - - - -

- - - - - - - - -

- - - - - - - - -

- - - - - - - - -

- - - - - - - -

- - - - - - - - -

- - - -

- - -

- - - - - - - - -

- - - - - - - - -

98

CirA

cces

s


9999


CirA

cces

s

A1.1 SECURE ACCESS NET Network access control (identi� cation by RFID proximity, radio control and remote control)

A1. ACCESS AND ATTENDANCE CONTROL SYSTEMS (TIME/ATTENDANCE) DISTRIBUTED IN TCP/IP NETWORK WITH CENTRALISED MANAGEMENT SOFTWARE

SECURE ACCESS NET is an effective solution to the access control needs of any organisation. The controller is fast, robust and powerful, based on native TCP/IP communication and an em-bedded ARM Linux microprocessor. Installation is via computer network, with an easily scalable distributed architecture.

The RFID readers offer secure, comfortable and maintenance-free identification, using different elements (proximity cards, key rings or bracelets and radio remote or “hands free” remote control).

The basic QUICK ACCESS software for centralised system ma-nagement, provides a practical and simple user interface. Conti-nuous software use is unnecessary; once the controller is configu-red, it autonomously controls accesses offline.

SECURE ACCESS NET is the ideal solution for access con-trol and consultation of related data.

Nota: LF: 125 KHz, HF: 13,56 MHz (Mifare)

CirAccessAccess and attendance control systems

New

100

CirA

cces

s



ONLINE/OFFLINE CONTROLLER IN TCP/IP NETWORK

SECURE ACCESS NET 160002

Secure Access NET is an access control unit for 2 doors, which can operate Online (software) and Offline (autonomous). Its operational architecture enables the creation of a totally scalable system, making it a reliable, robust solution for both small and medium-sized facilities and for large projects. The entire system will be controlled via the IT network. The access control switchboard is mounted inside a casing (power supply included) and has TCP/IP communications, making it possible to manage up to 2 readers and 2 relays. Each reader has 1 relay and 2 digital inputs associated by default.

Characteristics:

• Scalable access control.• Distributed installation, centralised management.• Multiple technologies: RFID readers (125 KHz / Mifare), Radio.• Storage capacity for up to 20,000 different tags and 1,000 events.• 6 Digital inputs: 4 Inputs associated with the RS-485 ports (2 inputs for each one) + 1 Tam-per + 1 External battery activation detector. • 2 Switched (NA/NC) relay outputs (5 A, 250 V AC).• TCP/IP communication (10/100 auto-detectable).Online/Offline system operation.• Management of 1 or 2 readers via independent RS-485 ports: up to 1,200 m. • 2 independent power supply outputs for each reader: 12 V DC, 0.5A. • Antipassback Functionality • Connection terminal strips via connectable terminals. • Supply: 88-264 V AC. • Consumption : 19 VA. Working temperature: -10ºC to +60ºC. • Dimensions : 230 x 205 x 67 mm. • Fast and easy start up.

SECUREACCESS NET OEM

160001

The OEM Secure Access NET controller has the same features as the Secure Access NET apart from:

• Supply: 12 V DC +/- 20% (power supply not included). • Consumption: 25 W• Dimensions: 160 x 100 x 25 mm. • Electronic board without casing or power supply. • Supports for DIN rail. • Possibility of programming event notifications via DLL.• Encryption via AES/Rijndael in CBC encrypted mode with 256 bits and explicit IV.• HMAC/SHA-1 Authentication via 160 bit signatures and 256 bit keys.• Possibility of configuring REX (Request to Exit).• Supply of DLL or library for Linux that enables media abstraction or solely packet enco-ding and decoding.

.

Faststart up

Linux Embedded

Maintenance free

101


CirA

cces

s


RS-485 RFID READERS FOR PEDESTRIAN ACCESS (CARDS, KEY RINGS OR BRACELETS)

CP-DT LF 160006

Terminal with proximity reader with keypad and display. RS-485 output for connection to controller. Supply 12 V DC +/- 20%. Consumption 250 mA. Reading distance 5 cm (maximum range with Circard card). The identification method is “Card + PIN” (2 actions are required and in this particular order).

• 2 Digital inputs: voltage-free contacts, functionality according to Standard or Integrat-ed software. Relay outputs (2) voltage-free contacts, 250 V AC 5 A, NO/NC switched, availability according to Standard or Integrated software. Dimensions 209.58 x 144.58 x 47.5 mm. Wall/Surface mounted. For indoor installation (IP41). Working temperature: -30ºC to +50ºC.

CP-DT HF 160007

The CP-DT HF terminal has the same features as the CP-DT LF, with the difference that it incorporates an RFID HF (Mifare) reader.

CP-L 130059

LF proximity reader with RS-485 output. Power supply 12/24 Vdc. Consumption 50 mA. Reading distance 13 cm (maximum range with Circard card). Dimensions 136x70x12.5 mm Surface mounting. IP65 protection for outdoor installation (working temperature: -10ºC to +50ºC).

CP-LH 130060

HF proximity reader with RS-485 output. Power supply 12 Vdc. Consumption 110 mA. Reading distance 5 cm (maximum range with Circard-HF card). Dimensions 136x70x12.5 mm Surface mounting. IP65 protection for outdoor installation (working temperature: -10ºC to +50ºC).

CP-LR

130202 Radio proximity reader with RS-485 output. Power supply 12/24 Vdc. Consumption 40 mA. Maximum range 50 m. Frequency 868 MHz. Dimensions 136x70x15.6 mm Sur-face mounting. IP65 protection for outdoor installation (working temperature: -10ºC to +50ºC). Operation with radio control tag.

102

CirA

cces

s



CP-A 130033 LF proximity reader with RS-485 output. Power supply 12/24 Vdc. Consumption 140 mA. Reading distance 28 cm (maximum range with Circard card). Dimensions 163x163x31 mm. Surface mounting. IP65 protection for outdoor installation (working temperature: -10ºC to +50ºC).

CONVERSOR RS-485 PARA LECTORES WIEGAND

CRS-485WT 310027 Transparent Wiegand to RS-485 converter. Wiegand input 26, 34, 36 and 37 selector. Assembled in IP65 case. Allows for connection of identification peripherals from other manufacturers to the Secure Access Net controller (HID, Tag Master, proximity, UHF, active tags, etc.). Offers the possibility of using Wiegand devices with the advan-tages of RS-485 (distance 1,200 m with just one twisted pair and two way communication supervised by the controller). Consult tried and tested equipment (other equipment requires a sample for prior compatibility testing in Circontrol).

USB RFID READERS

CP-LF/USB 130054

LF proximity card reader with USB connection. Includes CD with drivers.Desktop equipment.

CP-HF/USB 130056

HF proximity card reader/writer with USB connection. Includes CD with drivers, libraries and documentation for integration. Desktop equipment.

103


CirA

cces

s


BASIC CENTRALISED MANAGEMENT SOFTWARE FOR SECURE ACCESS NET ACCESS CONTROL SYSTEM

QUICK ACCESS SQL 610100 Basic access control management software, for SECURE ACCESS NET and SECURE ACCESS NET OEM network controllers. Unlimited number of users (in the software data-base, maximum 20,000 per controller) and unlimited number of network controllers. Easy, intuitive use. Requirements: Windows XP or 7 Professional 32 Bits. Minimum PC: 256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other operating systems or configurations).

Characteristics:

• User configuration: Expiry date, public holidays, belonging to groups, assignment of multi-ple tags (cards, key rings, radio controls), various text fields (editable title pages).

• Access points: RFID, radio, proximity readers etc., grouped in rooms. • Creation of groups with rooms and access times (applicable to all user associated access points).

• Events screen: Monitors clocking in and out in real time.

• Configuration of devices: Communications port, controller, RS-485 readers, USB reader for proximity tag registration (cards, key rings, bracelets).

• Antipassback* Input/Output Function: For user to clock in and out in the right order: Input/Output/Input, etc.

• Creation of user accounts (to protect access to QuickAccess software): Limited or admi-nistrator type authorisations.

Highly robust and reliable SQL Server database. IMPORTANT: Software start-up and user registration in the database should be completed in the PC managing the installation.

• Backup copy and system restore (database and configuration files).

• Importation of users from CSV file.

• Includes QuickReport module for offline clocking in and out management. Two types of consultation: Clocking and out / User status (outside, inside, undefined). Several filters applied to clocking in and out consultations: User, group, room, type of access, time period, time slot. Printout of consultation results.

• Exportation of information to external file (TXT / MDB). Deletion of selected clockings in and out.

* Antipassback only with CP-LH readers (RFID Mifare reader, 13.56 MHz) among different controllers in system network (Secure Access NET or Secure Access NET OEM). Secure Antipassback information (does not depend on the network, software or intermediate devi-ces); the Antipassback status is saved in the Mifare card memory.

104

CirA

cces

s


RFID IDENTIFICATION ELEMENTS (CARDS, KEY RINGS, BRACELETS, RADIO REMOTE, "HANDS FREE" REMOTE CONTROL, ETC.)

SEE SECTION A5.1

POWER SUPPLIES

SEE SECTION A5.2

105

CirA

cces

s


A1.2 PICK 800 (RFID proximity identi�cation)Time & Attendance Control SystemPICK 800 is an effective solution to the working hours control needs of any organisation. PICK 800 is integrated into the client’s IT system, pro-viding a powerful and easy to use interface with the user. PICK 800 is the ideal solution for working hours control and consultation of related data.The PICK 800 Terminal enables clocking in and out without incidents sim-ply by presenting the card or clocking in and out with incidents, in which case the incident code should be entered by keyboard prior to the cloc-king in or out.The working hours control system also has the CirAccess Soft CAS-P ma-nagement software.

WORKING HOURS CONTROL IN NETWORK

Large screenInstallation in network

Shift change siren relay

106

CirA

cces

s



RFID TERMINALS

PICK 800 140081 RFID (LF) data capture terminal with TCP/IP communication. Input power: 85-240 V AC. Consumption: 25 VA. Integrated LF proximity reader. Memory for 10,000 events. 128x240 point LCD display. TCP/IP communication (RJ45 connector ) for management from the PC via PickMemory software. 3x4 numeric keyboard + 1x4 functions (access to configuration menu, password protected). 1 configurable relay output (250 V AC 5 A) (connection to siren to announce breaks, shift changes, etc.). 1 relay output (250 V AC 5 A) activated with each reading (connected to lighting element or buzzer so user is sure that he has clocked in or out). Surface mounted. Dimensions 220x180x63 mm. For Indoor installation (working tem-perature: -10ºC to 55ºC).perature: -10ºC to 55ºC).

PICK 800 HF 140082

RFID (LF/HF) data capture terminal with TCP/IP communication. Input power: 85-240 V AC. Consumption: 25 VA. Integrated LF and HF proximity readers. Memory for 10,000 events. 128x240 point LCD display. TCP/IP communication (RJ45 connector) for management with PickMemory software. 3x4 numeric keyboard + 1x4 functions (access to configuration menu, password protected). 1 configurable relay output (250 V AC 5 A) (connection to siren to announce breaks, shift changes, etc.). 1 relay output (250 V AC 5 A) activated with each reading (connected to lighting element or buzzer so user is sure that he has clocked in or out). Surface mounted. Dimensions 220 x 180 x 63 mm. For Indoor installation (working temperature: -10ºC to 55ºC).temperature: -10ºC to 55ºC).

USB RFID READERS

CP-LF/USB 130054

LF proximity card reader with USB connection. Includes CD with drivers.Desktop equipment.Desktop equipment.

CP-HF/ USB 130056HF proximity card readers/writers with USB connection. Includes CD with drivers. Desktop equipment.

PICK800 TIME CONTROL BASIC CENTRALISED MANAGEMENT SOFTWARE

PICKMEMORY 610068 Basic time/attendance control management software, for terminals in PICK 800 network. Unlimited number of users (in the software database, the terminal only registers clockings in and out) and unlimited number of terminals in network. Easy, intuitive use. Requirements: Windows XP or 7 Professional 32 Bits. Minimum PC: 256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other configurations).

Characteristics:

• Two types of working time: Schedule (defined time: Entry/Exit), Flexitime (times not defined: no. of hours worked).• Three types of time: Normal, Daylight overtime, Nocturnal overtime.• Definition of personal events: number code + description, the appropriate time is deducted from Hours Worked that particular day.• Several types of consultation: clocking in and out, hours worked, events (personal exits, late-ness, manual clocking in and out, etc), user status.• Exportation (TXT/MDB), printout and deletion of clocking in and out.• Possibility of activating two types of user account (alphanumeric password) to protect access to software: Administrator (total access to software), User (only permitted to consult ‘user status’).

107


CirA

cces

s


RFID IDENTIFICATION ELEMENTS (CARDS, KEY RINGS AND BRACELETS)

SEE SECTION A5.1

108

CirA

cces

s


A1.3 LPR-PARK Network access control (Identi� cation via licence plate recognition)Network access control (identification via licence plate recognition)

The LPR-PARK system, developed and manufactured by CIRCONTROL, uses licence plate reading as an effective solution to the access control needs of any organisation or car park.

The system captures the image with a native IP camera, specially prepared for licence pla-te images, which integrates a filter and infrared light to obtain the best quality in any situation (indoors or outdoors). It immediately processes the image with powerful OCR algorithms developed by experts in artificial neuronal vision, thus obtaining an instant image of the li-cence plate. The data is sent to the CAS station, which opens the access depending on the authorisations of each user.

The LPR-PARK system is fast, robust and powerful, based on TCP/IP communication. Ins-tallation is via the computer network, with an easily scalable, distributed architecture with centralised system management, via a practical, simple user interface.

IP camera

VMAT-LPR 540104

Video camera for one lane with stopped or moving vehicles. Includes one high-resolution IP camera, for lane widths of up to 3.5 m, mounted in an outdoor casing. Input for inductive loop connection and Output for barrier connection.

VMAT-MP-LPR 540112

Video camera for one lane with stopped or moving vehicles. Includes one high-resolution IP MEGAPIXEL camera, for lane widths of up to 3.5 m, mounted in an outdoor casing. Input for inductive loop connection and Output for barrier connection.

LPR-SOFT 610153

Basic licence for operation of the LPR-PARK system includes CD with setup software and for checking the operation of the system and one HASP USB dongle (licence for one lane) per PC.

P1.3.1 LPR EQUIPMENT

Neuronal OCR

Easy integration


109


CirA

cces

s


A1.4

LPR-A 610155 Expansion of the LPR-SOFT software licence. Licence for 1 lane on the PC with the basic licence

VMAT-VSOP 540011 Support base used to attach the camera. Made from galvanised steel, with a metallic grey finish.

VMAT-LED 460283 Infrared Focus, 850 nm, for installations without illumination. 230 VAC

DLI 140022 Inductive loop detector (magnetic). Power supply 220 Vac. Consumption 2 VA. 2 Relay outputs 2 A, 250 Vac (Pulse/Presence). 2 Indicator LEDs:power supply, presence. Configuration by microswitch (sensitivity, frequency, etc.). Manu-factured in self-extinguishing ABS box UL94 for mounting on 46277 DIN rail with an Unde-cal base (included). Working temperature: -40ºC to +85ºC. Dimensions 124x45x82mm.


LPR-PARK ACCESS CONTROL SOFTWARE

SEE SECTION A.1.4

110

CirA

cces

s


The CAS SYSTEM is an advanced control station that permits global, centralised management of different CIRCONTROL systems, combined in the same installation. Offers a multi-face-ted solution for the different systems in a CIRCONTROL network*: SECURE ACCESS NET, PICK 800, VIRDI and LPR-PARK. Also provides a solution to unified management of access and atten-dance control (time/attendance).

Manages different CIRCONTROL systems from one single central system, distributed in the same installation with TCP/IP communi-cation, and also from different control points in the network (multi-user). Incorporates a powerful consultation engine, with customi-sable filters and reports. Thanks to its structure in combinable modules, the system only uses the modules required for the pro-ject; other modules can be activated later with a licence.

THE CAS SYSTEM is a solution for access and/or attendance control projects that combine different CIRCONTROL sys-tems in the network.

* Only integrates the main features of each system (ask about project requirements beforehand).

Save Start Up

Combinable modules

New

A1.4 CAS SYSTEMCIRCONTROL global systems manage-ment (with combinable access control and attendance modules)

111


CirA

cces

s


CAS SYSTEM STATIONS

CAS station for access control. Allows different systems in the CIRCONTROL network to be combined in the same installation: SECURE ACCESS NET and VIRDI. Multiple identification technologies according to the system connected in the network: fingerprint and RFID (LF and HF proximity cards, radio control and MoveAccess-TRX "hands free" remote control). Includes CAS-A/SD module activated licence (up to 20 users). To increase features, the equipment has all the CAS system modules pre-installed (only activation with appropriate licence is required). Multi-station management in the network of the system requires CAS-A/MP software in each PC. Tower/desktop casing (ask about rack casing option). Power supply 230 V AC.

Characteristics:

• User configuration: Expiry date, access group, identification method, photo, additional in-formation.• Definition of individual "Access Points" or grouped into “Families”.• Clocking in and out logs with configurable multiple parameters for display: Person, access, start/end date, start/end time, card, ID, notes, valid, etc.).• Creation of “Attributes” to identify different types of clocking in and out using colours (valid, invalid, modified, start/end date, start/end time, etc).• Possibility of creating ‘Filters’ (fixed/dynamic) to show only specific types of clocking in and out that fulfil a number of conditions (Person, Access, Start/End Date, Start/End Time, Card, ID, Notes, Valid, etc.).• Possibility of creating ‘Analysis Reports’ using a ‘Filter’ to graphically display this informa-tion, enabling print outs in multiple formats (printer, PDF, XLS, CSV, RTF, XML, etc.).• Configuration of devices: Network parameters, authentication method, etc.• Online Antipassback Functionality between Input/Output access points (even between controllers and terminals of different types).• User Importation based on CSV files.• Creation of user profiles with limited authorisations to access the CAS controller.• Database backup copy and restore (licence activation required, CAS-Tools not included).

112

CirA

cces

s



CAS-P 160102 CAS station for attendance control (time/attendance). Allows different systems in the CIRCONTROL network to be combined in the same installation: PICK 800 and VIRDI. Mul-tiple identification technologies according to the connected system in the network: Finger-prints and RFID (LF and HF proximity cards). Includes activated licence of CAS-P/SD module (up to 20 users). To increase features, the device has all the CAS system modules pre-installed (only activation with appropriate licence is required). Multi-station management of the system in the network requires CAS-P/MP software in each PC. Tower/desktop casing (ask about rack casing option). Power supply 230 V AC.

Characteristics:

• User configuration: Expiry date, access group, identification method, additional informa-tion.• Definition of “Working schedules”, types of “Day”, types of “Time”, “Shifts”, “Times” and “Schedules”.• Clocking in and out logs with configurable multiple parameters for display: Person, ac-cess, start/end date, start/end time, card, ID, notes, valid, etc.).• Creation of “Attributes” to identify different types of clocking in and out using colours (va-lid, invalid, modified, start/end date, start/end time, etc).• Possibility of creating ‘Filters’ (fixed/dynamic) to show only specific types of clocking in and out that fulfil a number of conditions (Person, Access, Start/End Date, Start/End Time, Card, ID, Notes, Valid, etc.).• Possibility of creating ‘Analysis Reports’ using a ‘Filter’ to graphically display this informa-tion, enabling print outs in multiple formats (printer, PDF, XLS, CSV, RTF, XML, etc.).• Several predefined “Reports”: Differences (comparison real/theoretical hours), Attendan-ce, Absenteeism, Incidents, Absences, etc.• Printout of “Working Schedule” of employees for information panels.• Configuration of devices: Network parameters, authentication method, etc.• User Importation based on CSV files.• Creation of user profiles with limited authorisations to access the CAS controller.• Database backup copy and restore (licence activation required, CAS-Tools not included).

CAS-AP 160103 CAS station for access and attendance control (time/attendance). Same features as the CAS-A + CAS-P. Allows different systems in the CIRCONTROL network to be combined in the same installation: SECURE ACCESS NET, PICK 800 and VIRDI. Multiple identification technologies according to the system connected in the network: fingerprint and RFID (LF and HF proximity cards, radio control and MoveAccess-TRX "hands free" remote control). Includes activated licence of CAS-AP/SD module (up to 20 users). To increase features, the device has all the CAS system modules pre-installed (only activation with appropriate licence is required). Multi-station management of the system in the network requires CAS-AP/MP software in each PC. Tower/desktop casing (ask about rack casing option). Power supply 230 V AC.

CAS-LPR 160104 CAS station for access control with LPR-PARK licence plate reading system. Includes activated licence of CAS-LPR/ACCESS module for 1 lane. To increase features, the de-vice has all the CAS system modules pre-installed (only activation with appropriate licence is required). Multi-station management of the system in the network requires CAS-LPR/MP software in each PC. Tower/desktop casing (ask about rack casing option). Power supply 230 V AC.

113


CirA

cces

s


SAT ONLINE CAS 190110 Remote configuration and settings of the CAS station by our specialist technical person-nel. Requires Internet connection with the CAS station in the installation and that the entire system assembly is completed, correctly installed and checked.

CAS MULTI-STATION SYSTEM LICENCES AND SOFTWARE

CAS-A/SD 610157 Activates the CAS-A/SD basic module for access control at any CAS station (up to 20 users).

CAS-A/LT 610140 Activates the extension of the CAS-A/SD access control module to the CAS-A/LT module (20 to 40 users) at any CAS station.

CAS-A/SR 610141 Activates the extension of the CAS-A/LT access control module to the CAS-A/SR module (from 40 to unlimited number of users) at any CAS station.

CAS-A/MP 610142 Software for multi-station management of the access control module with the CAS sta-tion. The CAS-A/SD basic module in the station should be previously activated. Multi-sta-tion software activation with licence (for each PC). Requirements: Windows XP or 7, 32 Bits. Minimum PC: 256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other operating systems or configurations).

CAS-P/SD 610160 Activates the CAS-P/SD basic module for attendance control (time/attendance) at any CAS station (up to 20 users).

CAS-P/LT 610143 Activates the extension of the CAS-P/SD attendance control module (time/attendance) to the CAS-P/LT module (20 to 40 users) at any CAS station.

CAS-P/SR 610144 Activates the extension of the CAS-P/LT attendance control module (time/attendance) to the CAS-P/SR module (from 40 to unlimited number of users) at any CAS station.

CAS-P/MP 610145 Software for multi-station management of the attendance control module(time/attendan-ce) with the CAS station. The CAS-P/SD basic module in the station should be previously activated. Multi-station software activation with licence (for each PC). Requirements: Win-dows XP or 7, 32 Bits. Minimum PC: 256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other operating systems or configurations).

114

CirA

cces

s



CAS-AP/SD 610158 Activates the CAS-AP/SD basic module for access and attendance control (time/attendan-ce) at any CAS station (up to 20 users).

CAS-AP/LT 610146 Activates the extension of the CAS-AP/SD attendance control module (time/attendance) to the CAS-AP/LT module (20 to 40 users) at any CAS station.

CAS-AP/SR 610147 Activates the extension of the CAS-P/LT access and attendance control module (time/attendance) to the CAS-P/SR module (from 40 to unlimited number of users) at any CAS station.

CAS-AP/MP 610148 Software for multi-station management of the access and attendance control modu-le (time/attendance) with the CAS station. The CAS-AP/SD basic module in the station should be previously activated. Multi-station software activation with licence (for each PC). Requirements: Windows XP or 7, 32 Bits. Minimum PC: 256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other operating systems or configurations).

CAS-LPR/ACCESS 610149 Activates the extension of lanes in the CAS-LPR/ACCESS station (one licence per lane). Can be extended up to 8 lanes (ask about more lanes).

CAS-LPR/MP 610150 Software for multi-station management with the CAS-LPR/ACCESS station. The CAS-LPR/ACCESS basic module (minimum one lane) in the station should be previously acti-vated. Multi-station software activation with licence (for each PC). Requirements: Windows XP or 7, 32 Bits. Minimum PC: 256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other operating systems or configurations).

CAS-DB/TOOLS 610154 Activates the tools module for database backup copies and restoration for the CAS station (configuration, users, clocking in and out, etc.). Allows for manual or programmed automa-tic management.

115

CirA

cces

s


A2. OFFLINE ACCESS CONTROL SYSTEM WITH MANAGEMENT SOFTWARE

CIRPASS is an innovative CABLE-FREE access control system, based on the advantages of Mifare security identification technology. It is an effective solution to access control needs for locations that are isolated or difficult to wire. It also provides considerable savings in installation time and costs.

With the CIRPASS system, private authorisations for each user are re-gistered in the access card itself (no limit to users). This way there is no need for the control points to communicate with each other or with the management station software. Installation is fast, economic, easy and scalable.

The system offers advanced control features: Selection of authorised control points (up to 512) and time, expiry (date, quantity of accesses or passes through reader), antipassback (input/output or time), access registry for later consultation, user black list, etc.

A CIRPASS kit is assembled at each control point, consisting of a controller and Mifare reader/writer (only requires power supply and relay connection to the opening mechanism). The RFID reader/writer offers a secure, comfortable and maintenance-free identifi-cation system. SOFT PASS software, with a practical and user friendly interface, allows the system to be managed (user creation, control points, card recording and events consultations) by using a Mifare USB reader/writer.

Complicated access control applications are made easy with the CIRPASS system: Isolated locations (rural houses, transformer substations, wind farms, telecommunications antennae, ski resorts, etc) or others that are difficult for wiring (sports complexes, tourist complexes, historic buildings, seaports, universities, museums, etc).

The Mifare card is also available in key ring or bracelet format. It is also compatible with other CIRCONTROL access control (network or autonomous) and time/attendance control systems, and can be used as a unique identification element in all of them.

A2

ControllerCIRPASS

ControllerCIRPASS

(...)

Software SoftPass CP-HF / USBReader writer card

Reader CP-LH Reader CP-LH

(...)

New

INNOVATION

COSTSAVINGS

COSTS

CONTROL ISOLATED,

HISTORIC OR COMPLEX

LOCATIONS

116

CirA

cces

s



KIT CIRPASS

CIRPASS 140066 Advanced HF access control system: CP-LH reader + Cirpass controller. * CP-LH reader: HF proximity reader with RS-485 output. Power supply 12 Vdc. Consumption 110 mA. Dimensions 136x70x12.5 mm Surface moun-ting. Reading distance 5 cm (maximum range for Circard-HF card). IP65 protection for outdoor installation (working temperature: -10ºC to +50ºC)protection for outdoor installation (working temperature: -10ºC to +50ºC)

* Cirpass Controller: Power supply 110-230 Vac. Consumption: 4.6 VA. USB port for connection to PC (time stamp download and configuration). 1 Relay output (potential free, NO contact). RS-485 communication (terminal block) and 12 Vdc voltage outputs for CP-LH reader. Memory for 2,500 time stamps. Dimensions 36x85x65 mm. Mounting on rail DIN 46277. For indoor installation (working temperature: 0ºC to +50ºC).

Every access point (Cirpass: reader + controller) must be configured with a door number (reader no. in Softpass software) and shall be independent of the others, i.e., they do not need to be wired to each other. The Softpass software, the CP-HF/USB reader (adding users) and the tags (Circard-H cards / Cirkey-HF keyrings) complete the system.

MANAGEMENT SOFTWARE FOR CONTROL OF CIRPASS ACCESS

SOFTPASS 610088 Management software for the CIRPASS access control system. Requirements: Windows XP or 7, 32 Bits. Minimum PC:

Characteristics:256MB RAM, Pentium 3 or higher, 1GB hard disk (ask about other operating systems or confi-gurations)• Two working modes: Basic / Advanced.• No limit to number of users (authorisations are stored in the user’s card).• Three types of expiry (date/time, number of accesses and passes through a reader).• Up to 3 different time slots for each user (same time for all the authorised access points).• Clocking in and out downloads and exportation.• Configuration of access points: door number, relay time, antipassback. Maximum of 512 CIRPASS control points per installation.• Recording using a USB reader/writer of the user and function cards (configuration, events download, black list, blocking/unblocking of control point, etc).•Direct USB connection between the PC with SOFTPASS software and the CIRPASS con-troller (one controller at a time) for programming the door number and date/time or for down-loading all the events in the memory (2,500).• Highly robust and reliable SQL Server database. IMPORTANT: Software start-up and user registration in the database should be completed in the PC managing the installation.

117


CirA

cces

s


CIRPASS IDENTIFICATION ELEMENTS

Circard-HF 110017

HF proximity card (Mifare). ISO format. 1-kB capacity. Read/Write.

Cirkey-HF 120035

HF proximity key ring in a “water drop” format. Read/Write. Includes chain with ring.

CT-RHF* 120036

HF (Mifare) proximity tag in “Bracelet” format. Reading/Writing.

CIRPASS USB READER/WRITER

CP-HF/ USB 130056

HF proximity card reader/writer with USB connection. Includes CD with drivers, libraries and documentation for its integration. Desktop unit.

IMPORTANT: Recording the Mifare card is a delicate process, which can damage it if not done correctly. Just leave the card loose on the reader/writer until the process ends (software noti� cation).

POWER SUPPLIES

SEE SECTION A.5.2

118

CirA

cces

s


A3. AUTONOMOUS ACCESS CONTROL TERMINALS

At CIRCONTROL we develop and make simple access control solutions with au-tonomous devices, sufficient for many users who are not looking for more complex solutions. Network installations with software are not always necessary if they do not provide more advantages than the ones that are needed. Simpler installation and use solutions are often much better, while at the same time they provide enough security for real control needs.

Autonomous terminals do not need to be connected to the IT network, nor do they re-quire a PC with configuration and management software. They have their own internal menu. with the necessary settings for start-up and use. All this also results in conside-rable cost savings.

We have autonomous terminals with RFID identification (proximity card, key ring or bracelet, or even radio control for vehicles), fingerprint and PIN. These identification elements are also compatible with other CIRCONTROL systems for access and time/attendance control, and can be used as a unique identification element in all of them.

CIRCONTROL autonomous devices are recommended for a large number of access control applications, such as: rented storage rooms and offices, IT equipment data centre rooms, warehouses and workshops, tourist apartments and rural houses, priva-te residences and neighbourhood associations, businesses, bars and restaurants, etc.

New

Simple national ID card mana-

gementInnovation

Large user

capacity

119

CirA

cces

s


CONTROL TERMINALS (UP TO TWO ACCESSES)

KIT DNI 1-PI LF 160003

For 1 indoor pedestrian access. Consists of a Secure Access DNI LF autonomous terminal, with integrated LF RFID proximity reader. Permits connection to an RS-485 external reader to extend it to 2 accesses (not included). Capacity for up to 500 users (250 users if all of them have card or key ring and radio control). Configuration via a simple, intuitive multi-language menu (protected with Administrator card or PIN). The main feature is the possibility of linking users' tags (proximity card, key ring or bracelet) to their own national ID card or passport number. This way a user can be eliminated from the system without having to have his/her tag physically present or interfering with other users; this data is simply used in the "Removal" function. The device has 2 digital inputs to activate 2 relays using a button. The elegant design, ease of insta-llation (surface/embedded) and simple handling, make it the right solution for many autonomous access control applications. Indoor use. Supply 12 V DC (external source included). Dimensions: 209x144x47 mm.

Optional reader for extension to two accesses:

CP-ES, CP-E, CP-L, CP-A (pedestrian access with LF card, key ring or bracelet identi-fication).CP-LR (garage access with radio control identification)

KIT DNI 2-PI 140120

For 2 indoor pedestrian accesses. Consists of a Secure Access DNI LF autonomous terminal and CP-ES external reader. Same operational features as the DNI 1-PI LF KIT. The terminal includes an LF RFID proximity reader for 1 access. Includes an LF RFID CP-ES external reader (RS-485) for the second interior access. Terminal for indoor use: Supply 12 V DC (external source included). Dimensions: 209x144x47 mm. External reader for indoor use: Supply 12 V DC (directly from terminal). Dimensions: 84x84x17 mm (surface mounted).

A3.1 SECURE ACCESS DNI Autonomous access control for up to 2 doors and 500 users (RFID proximity card and radio control identi� cation)

CIRCONTROL has developed an innovative autonomous access control terminal. Thanks to its intuitive menu, the device is easy to ins-tall and configure using the built-in screen and touch pad. Menu use is protected by an Administrator card or PIN. The integrated RFID reader offers a secure, comfortable and maintenance-free identification system (proximity card, key ring or bracelet, or even radio control for vehicles).

Capacity for up to 500 users. The terminal has an innovative functio-nality to give it greater value: it allows the user’s national ID card or passport number (8 digits) to be linked, and with just this data the user can be removed from the device, with no need to have the card or radio control physically available and without interfering with other users!

It also has 2 relays, which can manage control of 2 accesses, simply by connecting an external reader to the terminal (for indoor and outdoor use or with radio control for garages). It is provided in pre-prepared kits for each application.

Installation just requires wall mounting (surface or embedded), power supply and connection of the relay to the door opening mecha-nism. Practical but elegant design. Does not require connection to IT network or PC with software.

KIT DNI 2-PI


120

CirA

cces

s



KIT DNI 2-PE 140121

For 2 pedestrian accesses, one indoor and one outdoor. Consists of a Secure Access DNI LF autonomous terminal and CP-L external reader. Same operational features as the DNI 1-PI LF KIT. The terminal includes an LF RFID proximity reader for 1 access. Includes an LF RFID CP-L external reader(RS-485) for the second outdoor access. Terminal for in-door use: Supply 12 V DC (external source included). Dimensions: 209x144x47 mm. Exter-nal reader for outdoor use: Supply 12 V DC (directly from terminal). Dimensions: 136x70x12 mm (surface mounted, IP54 protection).

KIT DNI 2-PG 140122

For 2 accesses, one indoor pedestrian access and another for garage door (with radio control). Consists of a Secure Access DNI LF autonomous terminal and CP-LR external reader. Same operational features as the DNI 1-PI LF KIT. The terminal includes an LF RFID proximity reader for 1 pedestrian access. Includes an LF RFID CP-LR external reader (RS-485) for the second access to garage with radio control (radio control not in-cluded). Terminal for indoor use: Supply 12 V DC (external source included). Dimensions: 209x144x47 mm. External reader for garage use with radio control: Supply 12 V DC (directly from terminal). Dimensions: 136x70x12 mm (surface mounted, IP54 protection).

KIT DNI 1-PI HF 160004

For 1 indoor pedestrian access. Same operational features as the DNI 1-PI LF KIT, except for type of RFID reader. Includes HF (Mifare) proximity reader. Permits connection to an RS-485 external reader to extend it to 2 accesses (not included). Indoor use. Supply 12 V DC (external source included). Dimensions: 209x144x47 mm..

Optional reader for extension to two accesses:

• CP-LH (pedestrian access with HF card, key ring or bracelet identi� cation).• CP-LR (garage door access with radio control identi� cation).

EDS 320025 Electric door strike. Power supply 8/14 V AC/V DC. Unlocks when voltage is applied. Wall mounted. Dimensions 160 x 25 x 28 mm. Anti-panic security lock (door unlocks in absence of voltage).

RFID IDENTIFICATION ELEMENTS (CARDS, KEY RINGS, BRACELETS AND RADIO CONTROL)

See section A5.1

POWER SUPPLIES

See section A5.2

KIT DNI 2-PE

121

CirA

cces

s


A3.2 BELLBOX Autonomous access control of 1 door and 24 users(RFID proximity card and radio control identi� cation)

The BELLBOX controller is outstanding for its simplicity in installation and handling. It is a highly practical and economic solution for controlling access for one door for up to 24 users. The Pedestrian Kit also allows for use of a bell with different melodies, included in the RFID reader itself and which can be heard from the controller. The device is quick and easy to install and configure with just 4 buttons! RFID identification is a secure, comfortable and maintenance-free identification sys-tem (proximity card, key ring and bracelet, or even with radio control).

Installation just requires wall mounting, power supply and connection of the relay to the door opening mechanism.

Does not require connection to IT network or PC with software. An ideal solution for small access control installations (residences, com-mercial premises, offices, etc).

BELLBOX KITS

KIT BELLBOX 1-PI 140010

For 1 indoor pedestrian access. Consists of a BellBox terminal and an LF RFID exter-nal reader. Capacity for up to 24 users. Easy to configure and handle with just 4 buttons. Identification with proximity card, key ring or bracelet. Reader includes a bell button, surface or embedded mounting in standard casing: 45x45mm. Controller includes a loudspeaker for the bell with different selectable melodies. Indoor use. Power supply 230 V AC. Dimensions: 135x110x50 mm.

KIT BELLBOX 1-PG 140010G

For 1 access to garage or commercial premises (with radio control). Consists of a BellBox terminal and a CP-LR external reader. Capacity for up to 24 users. Easy to con-figure and handle with just 4 buttons. Identification with radio control. Indoor use. Power supply 230 V AC. Dimensions: 135x110x50mm. CP-LR external reader: Supply 12 V DC (directly from terminal). Dimensions: 136x70x12 mm (surface mounted, outdoor use, IP54 protection).

RFID IDENTIFICATION ELEMENTS (CARDS, KEY RINGS, BRACELETS AND RADIO CONTROL)

See section A5.1

POWER SUPPLIES

See section A5.2


122

CirA

cces

s



A3.3 KEYBOARD

DESCRIPCIÓN

AUTONOMOUS ACCESS CONTROL FOR 1 DOOR (NUMBER CODE IDENTIFICATION)

TA-LS* 340511

Keypad for Basic Access Control (Stand-alone). Power supply 12/24 V DC/ V AC. 12 keys. Memory for 200 users (user code length: 4 - 8 digits). 1 relay output (potential-free). Switch contact: N.A./N.C.). 1 digital input for manual operation (button). Programming via “Master” code and function codes. 2 status indicator LEDs (con� guration, access granted/denied). Made with capacitive technology (high durability). Dimensions: 45 x 180 x 25 mm. Anti-vandal casing. Surface mounted. IP68 protection for outdoor insta-llation.


123

CirA

cces

s


A4. RFID MULTI-PURPOSE KIT FOR SYSTEM ACTIVATIONThe CP-S Kit is a simple solution for controlling the use of any type of device or system that needs the security of being activated only by authorised users. Easy to install and handle, the LF RFID reader is directly connected to the control unit. Requires no maintenance, communications or PC with software.

Only authorised users can activate the device or system simply by placing their perso-nal card close to the reader. Identification elements (card, key ring or bracelet) are not affected by electromagnetic fields, dust or damp. A simple bistable relay to the output makes it possible to even change the mechanism at each activation (ON/OFF).

The Kit permits multiple applications in sectors such as security, industry and energy saving:

• OFFICES: Photocopiers, lights, alarm, air-conditioning, computers, Data Centres, lifts, private offices, management, etc• INDUSTRY: Start up of machines, PLCs, fork lift trucks, etc• LABORATORIES AND SURGERIES: Medication cabinets, medical equipment, clini-cal history files and confidential information, etc• RETAILERS: Display cases, doors and blinds, lights etc.• HOUSES: Private pedestrian accesses, residential enclosures (swimming pools, gar-dens, etc), lifts, etc.• BARS AND RESTAURANTS: Stock rooms, management offices, doors and blinds, lights, etc.

or any other device or system that can be activated via a relay contact!

CP-S MULTI-PURPOSE ACTIVATION KIT

CP-S 140062

RFID LF multi-purpose kit for System Activation: CP-S controller + CP-S reader + program-ming card (‘Master’). Autonomous System (without communications). Programming (Regis-tration/Removal) via “Master” card.

* CP-S controller: Power supply 12 V DC/V AC. Consumption 1.5 W (at 12 V DC) / 2.5 W (at 12 V AC). Memory for 150 users. 1 relay output (contact-free, contact NO, 250 V AC 6A) timed (2 sec). RS-422 power and communication output for CP-S reader. Mounted on 46277 DIN rail. For indoor installation (working temperature): 0ºC to +50ºC).

* CP-S reader: LF proximity reader with RS-422 output. Power supplied by CP-S controller. Reading distance 8 cm (maximum range with Circard card). For indoor installation (working temperature): 0ºC to +50ºC). Surface mounted. Programming via “Master” card. Maximum distance between reader and controller 10 m.

* Applications: activation/deactivation of lighting systems (corridor/department/entire buil-ding), air conditioning, furnaces, industrial machinery, photocopiers, pedestrian accesses, etc.

CPS IDENTIFICATION ELEMENTS

ShellCard 110011

LF proximity card. Thickness 1.5 mm. Rectangular die-cut hole at one end for clips. Reading.


PRACTICAL AND ECONOMICAL

SOLUTION

MULTIPLE APPLICATIONS

124

CirA

cces

s



Circard 110010

LF proximity card. ISO format. Reading.

CirKey-S 120028

LF proximity key ring. Reading. Diameter 30 mm with die cut flange.

CT-R* 120027

LF proximity tag in “Bracelet” format. Reading. On request.

125

CirA

cces

s


A6.2

RFID IDENTIFICATION ELEMENTS FOR ACCESS AND ATTENDANCE CONTROLMinimum purchase: 10 units. Check special prices for bulk purchases

A5. COMPONENTS AND ACCESSORIES

CIRCONTROL complements its own products with accessories and solutions from leading specialist manufacturers. These selected Partners offer quality, innovation and technology, and maintain a close, ongoing relationship with the CIRCONTROL technical and sales teams.

Our RFID identification elements, for access and time controls offer maximum quality. Thanks to our considerable experience since 1997 in this type of product, with thousands of installations operating every day. Other less common RFID iden-tification elements are regularly supplied to our integrator clients for every type of application.

Security locks are an essential accessory for any access control installation (people or vehicles). There are a wide variety of models and products for all types of doors and the particular needs of each project. for this reason our specialist external co-llaborators use their experience to advise our clients and help them to choose the best solution for each case.

CIRCONTROL can provide the complete system in any installation for access, time and identification control.

Ask our technical/sales team.

A5.1 RFID identi� cation elements (cards, key rings, bracelets and radio control) “hands free” remote control

Shellcard 110011

LF proximity card. Thickness 1.5 mm. Rectangular die-cut hole at one end for clips. Rea-ding.

Circard 110010

LF proximity card. ISO format. Reading.

Circard-HF 110017

HF (Mifare) proximity card. ISO format. Capacity 1 Kb. Reading / Writing.

110090

PVC card sublimation printing (85x54 mm). Check price (according to design characte-ristics): B/W or colour, photographs, corporate logo, numbering, text (name and surname, company, department, etc.), coloured background, one or two sides, etc. Limited to cards in the Circard range.


126

CirA

cces

s



Cirkey-S 120028

“Tear drop” shaped HF proximity key ring. Reading/Writing. Chain with ring included.

Cirkey-HF* 120035

LF proximity key ring. Reading. Diameter 30 mm with die cut flange.

CT-R * 120027

LF proximity tag in “Bracelet” format. Reading. On request.

CT-RHF* 120036

HF (Mifare) proximity tag in “Bracelet” format. Reading/Writing.

Mando Radio 110400

Remote control (single code) for CP-LR reader. 2 channels. Frequency 868 MHz

Shellcard-W* 110015

LF proximity card (125KHz). Reading/Writing. Thickness: 1.5 mm. Perforated for use with clip (not included).

Circard-M* 110012

Dual-technology card: LF Proximity (125KHz) Reading and Magnetic Strip (high-coercivi-ty) Reading/Writing. ISO format.

CT-R *

RFID IDENTIFICATION ELEMENTS FOR OTHER APPLICATIONSMinimum purchase: 10 units. Check special prices for bulk purchases

127


CirA

cces

s


Circard-W* 110013

LF proximity card (125KHz). Reading/Writing. ISO format.

Circard-MW* 110014

Dual-technology card: LF Proximity (125KHz) Reading/Writing and Magnetic Strip (high-coercivity) Reading/Writing. ISO format.

Circard-MHF* 110017

Dual-technology card: LF Proximity (13.561KHz Mifare 1Kb) Reading/Writing and Magne-tic Strip (high-coercivity) Reading/Writing. ISO format.

CT-30* 120025

LF proximity disk (125KHz). Reading. Diameter: 30 mm. Central perforation for surface fixing.

CT-G* 120029

LF proximity "glass tube" (125KHz). Reading. Diameter: 3 mm. Usual applications: Iden-tification of animals, integrated into devices and objects, etc.

A5.2 POWER SUPPLY UNITS

PS-12ac 200496

Linear power supply. Power supply 230 Vac. Voltage output 12 Vac. Power 8 W. Galvanic insulation between input and output. mounted on rail DIN 46277. Dimensions 85x52x70 mm.

PS-12dc 200495

Linear power supply. Power supply 220 Vac. Voltage output 12 Vdc. Power 8 W. Galvanic insulation between input and output. mounted on rail DIN 46277. Dimensions 85x52x70 mm.

PS-24dc 200497

Linear power supply. Power supply 220 Vac. Voltage output 24 Vdc. Power 8 W. Galvanic insulation between input and output. mounted on rail DIN 46277. Dimensions 85x52x70 mm.

PS-12ac

128

CirA

cces

s



PSC-18-12dc 200512

Switched-mode power supply. 85-265 VAC power supply (50 ~ 60 Hz). Adjustable 12 VDC output (-10% ~ +15%). 18 W of power. 1.5 A of current. Internal protection fuse (250 VAC, 2 A) on the input. 2 LED status indicators. Mounted on a rail, DIN 46277. Dimensions of 90 x 22.5 x 115 mm. It is advisable to leave 25 mm of free space on each side for correct ventilation of the power supply.

PSC-18-24dc 200513

Switched power supply. Power supply 85-265 V AC (50 ~ 60 Hz). Output voltage 12 V DC adjustable (-10% ~ +15%). Power 18 W. Intensity 0.75 A. Internal safety fuse (250 V AC 2A) in input. 2 status indicator LEDs. DIN 46277 rail attachment. Dimensions: 90x22.5x115 mm. 25 mm free space is recommended on each side for adequate ventilation of the power source.

PSC-120-12dc 200518

Switched power supply. Power supply 85-265 V AC (50 ~ 60 Hz). Output voltage 12 V DC adjustable (-10% ~ +15%). Power 120 W. Intensity 10 A. Internal safety fuse (250 V AC 4A) in input. 2 status indicator LEDs. DIN 46277 rail attachment. Dimensions: 142x63.5x126 mm. 25 mm free space is recommended on each side for adequate ventilation of the power source.

PSC-120-24dc 200519

Switched power supply. Power supply 85-265 V AC (50 ~ 60 Hz). Output voltage 12 V DC adjustable (-10% ~ +15%). Power 120 W. Intensity 5 A. Internal safety fuse (250 V AC 4A) in input. 2 status indicator LEDs. DIN 46277 rail attachment. Dimensions: 142x63.5x126 mm. 25 mm free space is recommended on each side for adequate ventilation of the power source.

129

CirA

cces

s


www.circontrol.com

131 CirV

iew

*Check availability **Opportunity: Stock liquidation

INTELLIGENT VIDEO ANALYSIS SYSTEM

CIRCONTROL supplements its own products with systems and solutions from leading specialised manufacturers. These selected Partners offer quality, innovation and technology, and maintain a close, ongoing relationship with the CIRCONTROL technical and sales teams.

Since 2004, VGUARD (Video Guard), our technology Partner for perimeter intrusion detection, has been the leading Spanish manufacturer of intelligent video analysis systems. Their R & D & i team is comprised of engineers and experts in artificial vision and neural analysis. They hold the prestigious i-LIDS Primary Certification issued by the United Kingdom Home Office (which guarantees their quality and reliability).

Their innovative video analysis system continuously analyses the images provided by security cameras and immediately sends an alarm to the Control Centre in an intrusion situation. It acts as a "virtual guard".

Their perimeter detection system is currently used in several countries, with over 5000 channels in operation controlled by over 40 ARCs(Alarm Receiving Centres). One factor that sets it apart is its ease of implementation, thanks to its automatic configuring technology, thus providing significant savings on installation costs.

CirViewIP and CCTV Video Surveillance

132CirV

iew


CONTENTS

V VIDEO SURVEILLANCE SYSTEMS

V1. VGUARD SYSTEM 133

V1.1. VGUARD VIDEO ANALYSIS SERVERS (DETECTION) 134

V1.2. VIDEO VERIFICATION AND ALARM MANAGEMENT (CONTROL CENTRE OR ARC)

136

V2 . THERMAL CAMERAS FOR SAFETY APPLICATIONS 137

CirView - CIRCONTROL 2012 PRICE LIST

133 CirV

iew


By applying complex image-analysis algorithms, the VGUARD system immediately detects perimeter intrusion. It constantly analyses images obtained from analogue CCTV cameras or network IP digital cameras. Existing CCTV installations can be used for active intrusion surveillance at no additional cost. It's like having a “VIRTUAL GUARD”.

Scalable system (combining equipment with 2, 4, 6 and 8 channels). It allows multiple detection zones, rules and alarm schedules to be configured, and is able to distinguish between people and vehicles. It has an automatic configuration assistant for quick and easy implementation. It is the ideal solution for protecting open spaces and external perimeters, without the need to install additional perimeter sensors, resulting in substantial savings on installation and civil works. It reinforces the work of local or remote security personnel (ARC or Control Centre) with an effective system that never rests. A detection system based on video analysis provides better protection because it cannot be avoided.

The detection sequences are logged (pre/post alarm) and the ARC or Control Centre is automatically notified immediately. The alarm is received with the associated image (framing the detected intruder), which enables easy and instant confirmation by security personnel. If the review confirms that the alarm is positive, quick and effective action can be taken. The end client perceives better security because he is only informed following positive video confirmation, which also avoids important sanctions for reporting false alarms to police.

Examples of applications: warehouses for construction, copper wiring, machinery, vehicle compounds, solar or wind farms, industry, transformer stations, gas tanks, vineyards, universities, outdoor car parks, neighbourhoods, industrial parks, properties, high-class residences, military compounds, public administrations, embassies, ports, airports, etc.

Main features:

• Identifies protected external perimeter intrusion as it occurs, enabling on-time reaction• Distinguishes between people and vehicles • Detects the crossing of virtual barriers, with configurable passage directions• Automatically filters elements in the surroundings (lighting changes, moving plants, rain, etc.)• Greater detection coverage than physical sensors Does not require other detectors to be installed• No false alarms: The security guard or the ARC only reports real incidents (video verification)• Privacy: Only allows operator connection when there is an alarm• Rapid and effective preventive action: Remote relays and audio can be activated during an alarm• Simple handling: Alarms can be activated and deactivated with a conventional keyboard

Simple configu-ration

100% CCTV compati-

ble

Impenetrable and Effective

No sensors or civil works

V1. VGUARD SYSTEM

134CirV

iew


HYBRID VGUARD FOR ANALOGUE VIDEO OR IP NETWORK CAMERAS

VGUARD-200* 550958 Advanced Video Analyser for 2 coax analogue cameras with BNC or digital IP network cameras. Incorporates powerful virtual-vision and neural-analysis algorithms. Quick and easy implementation thanks to its intuitive configuration assistant. It is able to distinguish between detected intrusions and persons or vehicles. Each camera has unlimited security rules, according to schedules or calendars (passage direction, perimeter, linear barrier, etc.). It can be connected to a monitor for local (security guard) and remote alarm management via TCP/IP (LAN/Internet) to an ARC or control centre. Equipped with 4 digital inputs. Supports digital input from IP cameras. Optional internal or external module with relay outputs for triggering manoeuvres (including remotely). Rack mounted or desktop. 230 VAC Power supply .

VGUARD-400* 550959 Same features as the VGUARD-200, but with 4 channels.



AL-4-INT* 550962 Internal module with 4 relay outputs. Only compatible with hybrid servers.

AL-8-INT* 550963 Internal module with 8 relay outputs. Only compatible with hybrid servers.

AL-4-EXT* 550955 Internal module with 4 relay outputs. Compatible with hybrid or IP servers.

V1.1. VGUARD VIDEO ANALYSIS SERVERS (DETECTION)


135


CirV

iew


AL-8-EXT* 550956 External module with 8 relay outputs. Compatible with hybrid or IP servers.


VGUARD IP FOR DIGITAL NETWORK VIDEO CAMERAS

VGUARD-200-I* 550951 Advanced Video Analyser for 2 IP network cameras. Incorporates powerful virtual-vision and neural-analysis algorithms. Quick and easy implementation thanks to its intuitive con-figuration assistant. It is able to distinguish between intrusion detection and persons or vehicles. Each camera has unlimited security rules, according to schedules or calendars (passage direction, perimeter, linear barrier, etc.). It can be connected to a monitor for local (security guard) and remote alarm management via TCP/IP (LAN/Internet) to an ARC or control centre. Supports digital input from IP cameras. Optional external module with relay outputs for triggering manoeuvres (including remotely). Rack mounted or desktop. 230 VAC power supply.

VGUARD-400-I* 550952 Same features as the VGUARD-200-I, but with 4 channels.





136

TYPE CODE DESCRIPTIONCi

rVie

w



VGUARD-CAR* 550999 Professional software for centralised receiving, verifying and managing video alarms. Easy, quick and intuitive to use in 3 clicks. Automatically receives the VGUARD analyser intrusion alarm via TCP/IP (LAN/Internet), with the image of the detection and the target intruder framed. Enables instant video verification and effective reaction to a real alarm. In the event of an alarm, the operator can request the video sequence of the intrusion detec-tion (with pre-alarm) from the system and save a copy. To give an immediate dissuasive response during an alarm, the operator can connect to see the live video and act remotely with the VGUARD equipment relays, and even transmit audio (only during an alarm). In-cludes a license for 10 ARC subscribers (regardless of the number of units connected in a single installation). Subscriber data management. It can be integrated directly into the ARC software (consult previous integrations).

VGUARD-CRA/L* 550999 License for increasing the number of subscribers.

V1.2. VIDEO VERIFICATION AND ALARM MANAGEMENT ( CONTROL CENTRE OR ARC)

137 CirV

iew


V2. THERMAL IMAGING CAMERAS FOR SECURITY APPLICATIONS

NEW

The family of thermal cameras includes equipment for fixed or motorised installation, assemblies comprising a thermal imaging camera, TV camera and positioner, with IP communications and H.264 video encoding, or serial communication with PelcoD protocol, and analogue video outlets.

A thermal imaging camera has the following advantages over a conventional TV camera:

• Can see in total darkness

• Does not require additional lighting of any type

• Sees through smoke and the most adverse meteorological conditions: rain, snow, certain fog conditions, etc.

• Easily integrated into conventional CCTV systems

• Very reduced consumption

• Has a greater detection range than cameras using IR or conventional lamps

• Practically non-existent maintenance

• When used with video analysis systems, it provides greater efficiency, improves detection range, and notably reduces false alarms.

138CirV

iew


www.circontrol.com

139

NOTES

140

NOTES

Nº 6002038

CIRCONTROL has a network of distributors and representative agents all over de the world, for further information contact with:

CIRCONTROL S.A. (Headquarter)C/ Innovació, 3 - Industrial Park CAN MITJANS08232 – VILADECAVALLS (Barcelona)Spain

Tel.: +34 937 362 940Fax.: +34 937 362 941

[email protected]@circontrol.comwww.circontrol.com

Circontrol Short Form Catalogue

Documents

Transcript of Circontrol Short Form Catalogue