SOLIDWORKS: Lesson 1 - Basics and Modeling Fundamentals Introduction to Robotics.
Session 4 - Modeling Using Solidworks
-
Upload
lina-abd-el-salam -
Category
Documents
-
view
230 -
download
3
description
Transcript of Session 4 - Modeling Using Solidworks
-
SOLID WORKSBy: AbdEl-Rahman Bedir
-
Solid Works Course Content:
1. SolidWorks Essentials.
2. Part Modeling.
3. Assembly Modeling.
4. SolidWorks Drawings.
5. Video editing (+Motion analysis).
6. Photo view 360.
-
Promo
-
SolidWorks Essentials
Sketching entities.
Sketching tools.
Adding Dimensions.
Adding Relations.
Application.
-
REMEMBER
1. Before opening a new sketch, it is a must to select the drawing plan.
2. Keep eyes on status bar to differentiate between editing part and
editing sketch modes.
3. Adjust model view to facilitate drawing (Press space).
4. Control creating new sketch or editing existing one.
-
2D Sketching
Sketching Entities
Line.
Rectangle
Circle.
Arc.
Slots.
Sketching Tools
Trim.
Extend.
Offset.
Mirror.
Linear Pattern.
Circular Pattern.
-
2D Sketching
Colors Shown in the graphic window:
Push approval button to close and apply changes in a sketch
Try different sketches in the same drawing plan.
Color Meaning Color Meaning
Blue Opened Sketch (Under Defined)
Red / Yellow Opened Sketch (Error found)
Black Opened Sketch (FullyDefined)
Shiny Orange Mouse moved over (Design Tree)
Gray Closed Sketch Shiny Blue Sketch Selected from (Design Tree)
-
2D Sketching
Adding Relations
Point Point.
Point Line.
Line Line.
Arc Line.
Arc Point.
Arc Arc.
Adding Dimensions
Smart dimension tool:
Line length (Straight Horizontal Vertical)
Angle.
Arc radius.
Point location.
-
3D Modeling
Extrude (Base/Boss).
Extrude (Cut).
Fillets and Chamfers.
Mirror.
Linear and Circular patterns.
Reference planes.
-
WORK SHOP
Gripper Parts drawing.
-
Assembly