Salwa malik professional experience

Salwa Malik - CV 19 December 2012

Director - alphaplus architecture

Qualifications

Bachelor of Architecture – Alexandria University

Professional Experience

August 2010 Director - alphaplus architecture

2009-2010 Principal - Group GSA Australia

1987-2009 Senior Design Architect / Principal - Moore + Cashell Architects Australia

1979-1987 Senior Architect - WBTL: Basil Cairo/New York/Washington DC

1977-1979 Senior Architect - Warner Burns Toan & Lunde (WBTL), New York

1975-1977 Junior Architect - Ministry of Aviation, Cairo

Through work with Moore & Cashell Architects for over 22 years, and her role as a principal for the

Pharmaceutical & Life science unit of Group GSA, Salwa Malik has gained extensive experience,

specializing in all aspects of clean room, life science and hi-tech pharmaceutical facilities; working on

projects in every Australian state and in the South Pacific Region.

Salwa has participated in a broad range of architectural practices, involving feasibility studies, master

planning, design, documentation and construction management. Through her practical experience,

Salwa has become an unmatched contender and a connoisseur in her field.

Due to her exemplary communication skills, Salwa can successfully extract and interpret key

information from clients, as well as thoroughly understand the complexities of statutory codes and

regulations required for GMP facilities. Salwa strives to provide excellence in design that is

contemporary and innovative, flexible and user friendly, as well as economically & environmentally

responsible. Salwa is now a director of alphaplus architecture.

Director - alphaplus architecture September 2010 – present

Clean Room Design

Baxter Healthcare - Queensland Compounding Facility

Alphaplus is successfully leading a group of consultants to

deliver a full design for Baxter’s compounding facility in

Queensland. The facility consists of 2 large class B suites

served by Class C/B change rooms & class D/C

preparation rooms, one suite is for compounding under

Laminar Flow and the other is a containment suite. The

facility also includes a receiving warehouse, a temp

controlled store & cool room, packaging & despatch,

micro & QC testing, admin areas, staff amenities and a

Canteen.

Project Budget - 4M.

Completed May 2012

Baxter Healthcare - Auckland Compounding Facility

The facility is for the preparation of aseptically prepared

IV additives, narcotics, chemotherapeutic and parenteral

nutrition products. 2 Class B suites: one Containment suite

to accommodate 8 cytotoxic drug safety cabinets and

one for compounding under Laminar flow. Each suite is

served by class C & Class D areas.

The facility also includes a temp controlled store & cool

room, packaging & despatch, micro & QC testing, admin

areas and staff amenities.

Baxter Healthcare - Perth Compounding Facility Expansion

Salwa Malik


Corporate Design

Eli Lilly pharmaceuticals

DCOE offices: the design adopts the philosophy of

integrated work space. It includes a large open plan

workstation area designed to encourage collaboration &

interaction between functional groups, focus rooms that

provide a quite environment for focus time/solo work and

media hubs which facilitate collaboration with virtual

teams. The area also includes a number of facilities for

informal small group discussions.

Completed October 2011

Upgrade of existing staff canteen and kitchen expansion.

The upgrade provides pleasant outdoor dining areas with

the vision that these areas will encourage outdoor

informal meetings as well as group collaboration &

discussions.

Completed April 2012

Upgrade of site facilities for pedestrian and vehicle traffic,

including all 3 main gates, gate house and visitors & staff

parking.

Completed May 2012

Site Master Plan - to implement the philosophy of an

integrated work space to the entire site, approx 5200 m2

Marketing group area upgrade

HR + LnD group area upgrade

Finance group area upgrade


Warehouse

Waste management building & storage of dangerous

goods – Baxter Healthcare Toongabbie NSW

The facility is for the sorting & storage of the site’s waste

materials.

In addition to storage racking and large classified bins, it

accommodates granulation of plastic pour bottles, shrink

wrap bailers, EPS materials melting & compressing,

storage Stackable liquid waste, an automatic bin washer, flammable & solvent liquid waste storage, corrosive

material waste storage and Clinical waste.

The site will also house 2 large general & cardboard

waste compactors, in addition to the large timber bin.

Senior Design Architect – Principal Moore & Cashell Australia

1987-2009

Principal - Group GSA / Moore & Cashell 2009-2010

Clean room design

Compounding Facilities

Salwa had the principal role of designing and

successfully leading the consultant teams for the

completion of Baxter healthcare’s 4 new

Compounding facilities for the preparation of

aseptically prepared IV additives, narcotics and

chemotherapeutic & parenteral nutrition products in

Perth, Adelaide, Melbourne & Sydney.

Sydney’s compounding facility is the largest, a 3500 m2

stand alone building in Toongabbie. The site

accommodates 12 cytotoxic drug safety cabinets,

plus 2 x Robotic IntraVenous Automation equipment,

in addition to 13 laminar flow cabinets plus 3 x Robotic

Intra-Venous Automation equipment in class B spaces

served by class C & Class D areas.

Fresenious Kabi’s new Compounding facility in

Brisbane for the compounding of hazardous &

sensitizing IV drugs in Class II, and cytotoxic Drug

Safety cabinets & parenteral products in Class I.

Laminar flow cabinets in class B rooms are served by

class C & D preparation & change rooms.


Pharmaceutical manufacturing Facilities

Parke Davis Warner Lambert – New Solid Dose Facility in

Sydney, Australia. It involved the relocation of the entire

Solid Dose Process from the Wellcome facility in Sydney

which was being decommissioned as part of Wellcome’s

merge with Glaxo. The facility was a Class C multi level

gravity feed facility consisting of granulation, drying, a

3000kg cone blender, compression and encapsulation,

coating and packaging areas.

Glaxo SmithKline - Granulation suite. The facility is a Class

C suite for the granulation, milling, blending, pressing &

packaging of tablets. It involved the installation of

complex & extremely precise equipment.

Glaxo SmithKline Class D packaging room.

Parke-Davis Warner Lambert - high volume liquids facility.

Class C production & packaging for toothpaste, syrups &

mouthwash. The facility was class 2 hazardous due to the

large percentage of alcohol in mouthwash production. It

also involved complex reticulation of process pipes and

services, including CIP plant, PW plant, alcohol bulk

storage and sugar bulk storage.

Merck Sharpe & Dohme – Vioxx pressing & Packaging

class C suite complex gravity feed facility.

Reckitt & Colman - New toiletries manufacturing complex

including raw material warehousing, sampling &

dispensing, manufacturing, packaging and a finished

goods warehouse.

Grunenthal – ZhongShan China. New Manufacturing

complex including raw material warehousing, laminar

flow sampling & dispensing facilities, blending, tablet

pressing, packaging and finishing goods & finished goods

warehousing. The facility also included QA & micro

laboratories. IPQC, admin offices, staff canteen & plant

rooms.

Malayan pharmaceutical Factory – Malaysia. New solid

dose manufacturing building.

Raza pharmaceuticals – Malaysia. New Class B

Raza pharmaceuticals – Malaysia. Solid dose

manufacturing upgrade.

Parnell – Sydney. New Sterile facility for the production of

veterinary injectables.

Milpharma – Sydney. Liquids manufacturing upgrade.

Pitman Moore – Sydney. New veterinary production

complex, including warehousing, sampling, dispensing,

production, packaging, QC & Microbiology laboratory

plantrooms and an admin building.

Johnson & Johnson – Sydney. Sterilisation plant & sutures

packaging.


API (Active Pharmaceutical Ingredient)

Production facilities

Phebra – Sydney. A new facility for the production of

fluorescein Sodium EP 5.2 in class B areas. The facility is

classified as zone 1 & 2 hazardous due to the inclusion of

ethanol in the process as a carrier.

Biotechnology production facilities

Incubation Centre – ZGC life science park innovation

centre. North Beijing, China. 42,000 m2 complex for

flexible and adaptable Biotech Research Development

and Testing.

The facility includes 3 wings of individual PC2 & PC3 cell

culture laboratories for fermentation and purification

operations around a core of shared, specialised

equipment and support functions such as instrument

rooms, media-prep, washing, autoclaving, consumables

store, cool rooms, etc.

The facility includes pilot plants in each wing

incorporating inoculums preparations, dispensaries,

fermentation, purification, vial filling, packaging, change

rooms, etc.

Other common laboratories are located between the

wings includes QC laboratories, an instrument room,

instrument calibration, stability testing, sterility testing, DNA

testing, peptide, electron microscope & dark room,

HPLC’s. The facility is served by administration offices, a

library, an auditorium, meeting rooms, canteen and staff

accommodation

Seeinglong – Shanghai China. One way traffic of

materials & personnel. Class B Xeno-transplantation

Facility for the production of Acheless pain relief, a new

human therapy prepared from Bovine Adrenal Glands.

The product is a living encapsulated cell that is implanted

into terminal cancer patient’s spinal cord for long term

pain relief.

The process involves the extraction of cells under class A

laminar flow, disinfecting & sterilizing, cell separation,

incubation, micro encapsulation, formulation, vials filling

& capping, sterilisation and packaging & warehousing.

The facility also included alcohol dispensing, clean steam,

WFI, CIP, PW & PFW generation systems, sterile gas

distribution and storage & disposal of sterile waste.

Biotech Australia – Sydney. Manufacturing facility for

Human therapeutic products derived from recombinant

gene technology.


Pharmaceutical sampling & dispensing

facilities

Sandoz – Sydney Australia. High volume raw materials

dispensing in class A laminar flow booths.

Parke-Davis - Caringbah Sydney. Liquids dispensary

including dispensing of alcohol.

Pfizer – Caringbah Sydney. Contains raw material

sampling in a class A room and a laminar flow booth

in a class B room, as well as a sampling QA laboratory

and Quarantine.

Pfizer – Caringbah Sydney. A class B dispensary facility

including 3 class A laminar flow booths.

Glaxo SmithKline – Sydney. New class B Dispensing

facility with class A laminar flow booths.

Milpharma – Sampling & dispensary

Laboratories

Glaxo SmithKline – QC laboratory including general

testing area, instrument room, Fume hood room, cool

room, flammable liquids store, wash room,

administration offices, etc.

Research & development laboratory.

Astrazeneca - Microbiology & Sterility testing lab

including testing, media prep, washroom, cool room,

hot rooms, laminar flow and administrative offices.

Sterility lab includes 2 class B rooms for sterility testing,

prep & change rooms and washing & sterilization

rooms.

Parke-Davis Warner Lambert – QC laboratory including

general testing area, instrument room, Fume hood

room, cool room, flammable liquids store, wash room,

incubators and administration offices.

Sterilizing, laminar flow & bio-hazard safety cabinets.

Microbiology lab includes media prep, testing and

washing.

Burns philp – QA laboratories microbiology lab and

research & development lab.

Pax Australia – microbiology laboratory

Wyeth Pharmaceuticals - QC lab refurbishment.

Parnell – new QA & micro lab.

Raza Manufacturing Malaysia – QC, Micro and

research & development labs.

Hoe Pharmaceuticals Malaysia – QC laboratory.

CCM Pharma Malaysia - research & development lab

and pilot plant.


National Bio-research Institute – ZGC life science park,

Beijing China. Master plan study for a 45,000 m2 new

National Centre for Biological Research in plants,

animal & zebra fish.

Apart from research laboratories the design includes

Plant Growth rooms and Green House, animal housing

suites, Zebra fish tank, Common labs such as cell

culture labs, DNA sequencing, Histology, Virology,

Immunology, Microscopy, Radiology, electron

microscopy, etc.

The design also includes a central hub that

accommodates amenities, meeting rooms, training

rooms, video conferencing, administrative offices,

information centre, library, canteen, lounge &

common areas, accommodation for 30 visiting

scientists and senior laboratory researchers and single

accommodation in student type apartments.

Beijing Laboratory Animal Research Centre - Beijing

China. The14,000 m2 facility will produce 1-2 million

specific pathogen free rodents per year,

microbiologically and genetically defined for use by

veterinary, medical and scientific research groups to

enhance the validity and reproducibility of scientific

results.

The facility includes an Animal Production Building

where animals are housed in IVC - class 100

individually ventilated cages, in class B rooms served

by change rooms, prep rooms & autoclaves for the

sterilisation of food & beddings, animal testing

laboratories, quality control laboratories and

administrative functions.


Warehousing

Parke-Davis Warner Lambert – finished goods

warehouse, high bay (12m) for 5000 pallets and South

East Asia container dock.

Parke-Davis Warner Lambert – packaging material

warehouse reorganization.

Parke-Davis Warner Lambert – Dangerous goods store.

Merck Sharpe & Dohme – Flammable liquids

warehouse – Ivomec.

Merck Sharpe & Dohme - finished goods Warehouse,

High Bay (13M) for 3,500 Pallets, Cool Storage, Pick

and Pack, Sampling, Loading Dock, Warehouse

Offices and Engineering Work Shop.

Merck Sharpe & Dohme – Raw & Packaging materials

Warehouse, High Bay (13M) Warehouse for 3,500

Pallets, Sampling, Loading Dock, Packaging Materials

Assembly, Label Storage and Pallet Washing and

Warehouse Offices.

Sandoz – Narrow Isle Warehouse, high bay (14m) for

3,000 Pallets. Turret Truck operated warehouse fully

bunded, Receiving and Despatch, Order Picking and

Packing, Solvent storage and Aerosols storage.

Sandoz – Agro dangerous chemicals warehouse fully

bunded


Corporate Design

Eli Lilly West Ryde Cisco Tele Conference Centre

accommodating a CTS 3200 and 3 x 65” high

definition plasma screens. walls & ceilings were

sound insulated to achieve STC of 60 & sound

reverberation of 60.

Eli Lilly Elanco group offices

GlaxoSmithKline Australia, Ermington NSW

o R+D Offices

o Customer Services Offices

o Production Offices

Sandoz Corporate Centre, North Ryde NSW

Merck Sharp & Dohme, South East Asia Offices &

MMD training centre.

Parke Davis, Caringbah NSW Administration Offices

and Training Centre.

Baxter, Toongabbie Training Centre

Baxter, Toongabbie Gibbon Road Customer

Cervices Offices

Baxter, Toongabbie Existing Office Refurbishment

Baxter, Toongabbie New Corporate Centre

Masterplan.

Roche Office Fitout

Raza Offices, Malaysia

American Home Products Offices

Pittman Moore Administration Offices

Milpharma New Administration Offices

Botany Bay Shipping, North Sydney Offices


Other Facilities

Eli Lilly, West Ryde - Wellness centre accommodating

Gym equipment, including weights area, Games room,

sport courts, aerobic class area and amenities.

Baxter Healthcare Training Centre

Sydney University, Carslaw Building - New Computer

Library

Sydney University, Wolstenholme Computer Library &

Study Facility, Merewether Building

Sydney University Transient Building - Psychology Clinic

Sydney University Chemistry Building - Laboratory Upgrade

Parke-Davis Warner Lambert Tennis Court, Caringbah

NSW

Garden of Remembrance

Mr Glenn Baker House Expansion, Kenthurst NSW

Mr & Mrs Robert Bell House Expansion, Tasmania


Senior Architect Warner Burns Toan & Lunde, New York/Cairo

1977-1987

Nile Hilton Expansion, Cairo, Egypt

Nile Hilton Shopping Centre Upgrade + Expansion,

Cairo Egypt

Ramses Hilton, 850 Rooms, Cairo, Egypt

Ramses Hilton Shopping Centre, Cairo Egypt

Port Said Hilton, 450 Rooms, Port Said, Egypt

Port Said Hilton Business Centre, Port Said, Egypt

Administration Offices, Training Rooms and

Conference Centres

Helwan New Community – town planning for 110

Hectares, 10 Neighbourhoods for 110,000 low income

industrial workers

Zallaq Resort Beach, 132 hectares, Balrain

Orphanage & Aged Care Complex

Junior Architect Ministry of Aviation Cairo 1975-1977

Cairo International Airport

New Boeing 737 + 747 Simulator Building

Egypt Air Catering Building

Duty Free Refurbishment


Testimonials

To Salwa – Director alphaplus architecture

Just a quick note to say how wonderful the design of the new workspace has turned out!!! I

have arrived back in Sydney to see the elevated drawings and the panel of colours and

materials. Everything looks absolutely fabulous and I can't wait until e can move in to the new

space.

Thanks so much for your vision and excellent taste.

Amber Burns, PhD Scientific Communications Consultant

Group Leader - Biomedicines (non-neuroscience) and Oncology, Asia

Pacific Medical Communications

Eli Lilly Pharmaceuticals

August 2011

To Salwa – Principal Architect Moore & Cashell architects

Just to let you know, all visitors to the site are taken through the Laboratory and are quite

impressed with the design and lay-out and the site Lab design is viewed as best in practice in

the GSK world, thanks to you.

Zoran Stanic

Quality Control Manager GlaxoSmithKline Australia

December 2010

To Salwa - Principal architect Group GSA

May I say that it has been a pleasure to deal with you and learn from your extensive

experience in Australia. Your impact on the project has been significant and your legacy will

live on in the design and functionality of the facility.

On a personal note, I have enjoyed working with you and found your style engaging and

highly professional.

Iain Rosekilly

Operations Director

Fresenius Kabi Australia Pty Limited

July 2010

To Salwa – Principal architect Moore & Cashell / Group GSA

You have made an enormous contribution to Baxter Pharmacy over the last few years.

You have been an absolute pleasure to work with and I thank you for all your hard work and

expertise.

Derek Bonner

Pharmacy Operations Development Manager

Baxter Healthcare Pty Ltd

July 2010

“

”

”

”

“

“

“ ”

Salwa malik professional experience

Design

Transcript of Salwa malik professional experience