salt spray chember - SR Lab Instruments (I) Pvt....

2
AN ISO 9001 : 2008 CERTIFIED & CE CERTIFIED CO. S. R. LAB INSTRUMENTS SALT SPRAY CHAMBER

Transcript of salt spray chember - SR Lab Instruments (I) Pvt....

Page 1: salt spray chember - SR Lab Instruments (I) Pvt. Ltd.srlabinstruments.com/.../03/salt-spray-chember-2.pdf · SALT SPRAY CHAMBER Windows based software for Data Logging and for operation

AN ISO 9001 : 2008 CERTIFIED & CE CERTIFIED CO.

S. R. LAB INSTRUMENTS

SALT SPRAY CHAMBER

Page 2: salt spray chember - SR Lab Instruments (I) Pvt. Ltd.srlabinstruments.com/.../03/salt-spray-chember-2.pdf · SALT SPRAY CHAMBER Windows based software for Data Logging and for operation

Test Space Volume 450 - 600 Ltrs

Temperature Range 0 035 C to 50 C

Humidity Range 95% to 98% will be provided during salt spray Depending on saturation ofsalt Solution.

Temp. Control Accuracy Better than + / - 1 Deg . C.

Housing The Chamber will be mono block construction that comprise all system necessary for operation. The exterior surface is made up of non corrosive material.

Test Space Made up of FRP or PP Non corrosive material.

Air and Solution Piping Made up nylon or Poly – urethane material

InsulationThe Insulation material will be low k factor, high density and non Hygroscopic nature of mineral fiber.

Door

The door will be made of non corrosive acrylic with hinges in the rear. The door willbe designed having inclined ceiling provided with side wall baffles to avoid dropletsfalling on to specimen as per ASTM Standard, Option of pneumatic Door lifting arrangement of user comfort for sample loading and unloading.

Air Regulator A moisture and oil filter cum regulator ranging for 0-30 psi.

AtomizerNon corrosive trouble free atomizer capable of producing a fine fog 20-30 microMoles size with repeatable test results.

Fog collection Rate 1-2ml / hr / 80cm area.

SaturatorA temperature controlled non corrosive saturator with built in automatic water levelcontroller and immersion heater will be provided.

Specimen placement FRP Acrylic blocks will be provided for hanging the specimen

Heating of Test SpaceThe heating of the chamber will be done by using tape heaters of suitable capacity.The heaters will be embedded in the chamber such that there is uniformity.

Instrumentation

The Chamber will be provided with dual temperature indicator cum controller . The display of set values & actual value of Temperature Automatic water level controller with heater protection system. Pt-100 sensor will be provided with non corrosive glass.

Refrigeration Suitable capacity cooling system for below ambient conditions.

Accessories Intermittent spray operation system, Timer, time totalizer, Air purging sys.

Optional Accessories

SALT SPRAY CHAMBER SALT SPRAY CHAMBER

Windows based software for Data Logging and for operation from PC. Suitable Compressor for above

Due to continuos development & improvements in design, we reserve the right to change the specification without notice.

Test Standard As per - JIS-Z2317, DIN 50021, IS 5528, IS 6910, ISO 3768