Revision 4 - Atlanta Attachment Co.€¦ · manual before attempting to operate the machine....

Revision 4.1Updated: February 28, 2008

Atlanta Attachment Company, Inc.Confidential And Proprietary Information

The materials contained herein are confidential and proprietary information of Atlanta Attachment Company. In addition to any confidentiality and non-disclosure obligations that currently exist between you and Atlanta Attachment Company, your use of these materials serves as an acknowledgment of the confidential and proprietary nature of these materials and your duty not to make any unauthorized use or disclosure of these materials.

All materials contained herein are additionally protected by United States Copyright law and may not be used, disclosed, reproduced, distributed, published or sold without the express written consent of Atlanta Attachment Company, which consent may be withheld in Atlanta Attachment Company’s sole discretion. You may not alter or remove any copyright, trademark or other notice from copies of these materials.

Patents & Patents Pending

The sale of this product does not sell or otherwise transfer any license or other rights under any U.S. Patent or other corresponding foreign patent.This equipment is protected by one or more of the following patents: US patents:4,038,933; 4,280,421; 4,432,294; 4,466,367; 4,644,883; 4,886,005; 5,134,947; 5,159,889; 5,203,270; 5,307,750; 5,373,798; 5,437,238; 5,522,332; 5,524,563; 5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202; 5,865,135; 5,899,159; 5,915,319; 5,918,560; 5,924,376; 5,979,345, 6,035,794Foreign patents - 2,084,055; 2,076,379; 2,177,389; 2,210,569; 4-504,742; 8-511,916; 9-520,472; 0,537,323; 92,905,522.6; 95,935,082.8; 96,936,922.2; 5,159,889; 5,203,270.Other U.S. and Foreign Patents Pending.

Atlanta Attachment Company 362 Industrial Park Drive

Lawrenceville, Georgia 30045Phone:(770) 963-7369Fax:(770) 963-7641

Email:[email protected]

© 2006-2008 Atlanta Attachment Company. All rights reserved.

!! I M P O R T A N T!! I M P O R T A N TIt is important to read and understand the information contained within thismanual before attempting to operate the machine. Atlanta Attachment Co., Inc.shall not be held liable for damage resulting from misuse of the informationpresented within, and reserves the right to change the information containedwithin, without prior notification.

Table Of Contents

Assembly Drawings & Parts Lists ...........................................................................................................111393C Main Assembly ...........................................................................................................................31389060 Exit Roller Assembly ................................................................................................................41389078 Material Sensor Assembly ........................................................................................................51389113 Cross Cut Assembly ..................................................................................................................71389170 Pulley Assembly ........................................................................................................................81389172 Lift Roller Sensor Assembly .....................................................................................................91389212 Back Panel Electrical Assembly .............................................................................................111389224 Dancer Bar Assembly ..............................................................................................................121389245 Winder Assembly ....................................................................................................................131389258 Panel Table Assembly .............................................................................................................141389860 Slitter Assembly ......................................................................................................................151393029 Slitter Sharpener Assembly .....................................................................................................161393058 Cradle Assembly .....................................................................................................................171393125 Eye Adjustment Assembly ......................................................................................................181389896 Slitter Sharpener Assembly .....................................................................................................191393160 Rear Guard Assembly .............................................................................................................201393230 Lubrication Assembly .............................................................................................................211393282 Sharpener Assembly ................................................................................................................221393310 Table Stop Assembly ..............................................................................................................231393312 Lock Pin Valve Assembly .......................................................................................................241393372 Dancer Bar Switch Assembly .................................................................................................251393381 Solenoid Assembly ..................................................................................................................261393394 Regulator Assembly ................................................................................................................271393407 Clamp Weldment Assembly ....................................................................................................281393676 Encoder Assembly ...................................................................................................................291393751 Edge Cutter Assembly .............................................................................................................301393770 Front Guard Assembly ............................................................................................................311393842 Left Edge Cut Assembly .........................................................................................................331393852 Right Edge Cut Assembly .......................................................................................................351393C-PD1 Pneumatic Diagram ............................................................................................................361393C-WD1 Wiring Diagram ................................................................................................................371393C-WD2 Wiring Diagram ................................................................................................................381393C-WD3 Wiring Diagram ................................................................................................................391393C-WD4 Wiring Diagram ................................................................................................................401393C-WD5 Wiring Diagram ................................................................................................................411393C-WD6 Wiring Diagram ................................................................................................................421393C-WD7 Wiring Diagram ................................................................................................................431393C-WD8 Wiring Diagram ................................................................................................................441393C-WD9 Wiring Diagram ................................................................................................................451393C-WD10 Wiring Diagram ..............................................................................................................46

Assembly Drawings & Parts Lists

1393C Parts Book

1


The materials contained herein are confidential and proprietary information of Atlanta Attachment Company. In addition to any confidentiality and non-disclosure obligations that currently exist between you and Atlanta Attachment Company, your use of these materials serves as an acknowledgment of the confidential and proprietary nature of these materials and your duty not to make any unauthorized use or disclosure of these materials.

1393C Parts Book


2


1393C Parts Book

3

11393C Main Assembly

1 1389060 EXIT ROLLER ASSEMBLY 1 42 1389078 MATERIAL SENSOR, X CUT 1 53 1389087 GUIDE 24 1389094 ROD CLEVIS 25 1389100 BOOSTER CYLINDER MNT 26 1389113 CROSS CUT, DUAL MOTOR 1 77 1389114 PIVOT PIN 28 1389120 SENSOR BRACKET 19 1389122 CYLINDER MOUNT 210 1389123 NUT PLATE, ADDITIONAL 211 1389128 TOP ROLLER ASSEMBLY 112 1389148 PIVOT PIN 213 1389151 WASHER, PIVOT PIN 414 1389172 LIFT ROLLER SENSOR 1 915 1389178 STRUT, FRAME 116 1389184 BOLSTER PLATE 117 1389212 BACK PANEL ELEC ASM 1 1118 1389224 DANCER ASSY 1393 1 1219 1389229 MOLEX MANAFOLD 120 1389245 WINDER ASSEMBLY 1 1321 1389258 PANEL TABLE ASSEMBLY 1 1422 1389415 TOOL, POSITIONING 123 1389605 PULLEY, SLITTER MOTOR 124 1389606 PULLEY, SLITTER MOTOR 125 1389610 MOTOR MOUNT, MOD 126 1389716 COVER,TRANSFORMER 227 1389738 CLIP,SHIPPING 428 1389743 CYLINDER MOD ASSEMBLY229 1389860 SLITTER ASBLY 1 1530 1389896 SHARPENER ASBLY 1 1931 1393-001 BACK PLATE,LABEL 132 1393-LAB1 LABLES,CONTROL PANEL -33 1393-LAB2 LABLES,MISC -34 1393-LAB3 BACK PLATE,LABEL -35 1393-LAB4 LABLES,DOORS CLOSED -36 1393096 LINKAGE, TOP 237 1393098 LINKAGE, LOWER 238 1393100 MOUNTING WELDMENT 239 1393109 PIVOT, BOLT ON 240 1393133 PIVOT PIN 641 1393160 REAR GUARD 1 2042 1393186 GUARD, EXIT, LEFT 143 1393199 GUARD, EXIT 144 1393201 GUARD, SIDE TABLE 245 1393230 LUBRICATION,12 1 2146 1393240 ARM STOP WELDMENT 147 1393256 STOP ASSEMBLY 248 1393282 SHARPENER ASSY 1 2249 1393310 TABLE STOP ASSY 1 2350 1393312 LOCK PIN VALVE ASSY 3 2451 1393347 BRACKET, SHOW MNT 252 1393360 TABLE PIVOT ASST 253 1393372 DANCER BAR, PROX ASM 1 2554 1393381 SOLENOID ASSEMBLY 1 26

55 1393394 SHARPENER, KNIFE 1 2756 1393407 CLAMP WELDMENT 1 2857 1393425 LADDER, EXTENDED 258 1393615 GRABBER TOOL, 36 159 1393676 ENCODER ASSEMBLY 1 2960 1393711 CYLINDER BKT, MOUNTING 261 1393716 CYLINDER BRIDGE, LEFT 262 1393719 PLATE, ATTACHMENT 463 1393751 EDGE CUTTER 1 3064 1393770 FRONT GUARD ASSY 1 3165 1393C-PD1 PNEUMATIC DIAGRAM - 3666 1393C-WD1 DIAGRAM,WIRING - 3767 1393C-WD10 DIAGRAM,WIRING - 4668 1393C-WD2 DIAGRAM,WIRING - 3869 1393C-WD3 DIAGRAM,WIRING - 3970 1393C-WD4 DIAGRAM,WIRING - 4071 1393C-WD5 DIAGRAM,WIRING - 4172 1393C-WD6 DIAGRAM,WIRING - 4273 1393C-WD7 DIAGRAM,WIRING - 4374 1393C-WD8 DIAGRAM,WIRING - 4475 1393C-WD9 DIAGRAM,WIRING - 4576 AACDNC50150PPVCYLINDER,AIR,50B,150S 277 AACDNC50200PPVACYLINDER,AIR,ISO,50B 278 AACM3112DXP CYLINDER,AIR,2" BORE 279 AAFD2313 CLEVIS, AIR CYL 7/16-20 280 AAFD620 REAR PIVOT BRKT 281 AAFSGM16X1.5 CLEVIS ROD M16X1.5 382 AAFSNC50 FLANGE, SWIVEL 483 AAFSNCS50 CLEVIS SINGLE REAR 484 AAVHV410M VALVE, HAND 2 POS, 1/4" 185 BBNAP205-25 BEARING, PILLOWBLOCK 286 BBTRA613 WASHER,THRUST,STL, .375 487 CCCL10F CLAMP COLLAR- 5/8 ID 288 CCCLMSP20F CLAMP COLLAR- M20 889 CJ-2 MAIN ASSY AR 90 CJ-2-1-000 CJ-2 FRAME MODIFIED 191 EE14-4 CABLE,4 COND,14 AWG 192 EE18-2 BLACK TWO COND. CABLE 193 EE194EE631753 63AMP DISCON 194 EE194EE63PE GROUND TERMINAL 195 EE194LHE6N175 DISCONNECT HANDLEL 196 EE601612 GREY MULTI COND. CABLE25 FT97 FF3200 STRAIN RELIEF, 1/2 NPT 198 FF8463 NUT,LOCK,1/2NPT,NYLON 199 FF9912-2 WIRE,STR,#12,PVC,RED 50 FT100 MM1910A25 RULER,SILVER MYLAR 108 1101 MM9565K8 PLUG,BLACK 2" SQ, RIBBED19102 MM98335A04 SPRING CLIP, .06 WIRE 16103 MMT9945 TAPE,REFLECTIVE,2" WIDE 1104 MMY90S-4 MOTOR 1.1KW, 1800 RPM 1105 NNH3/8-16 3/8-16 HEX NUT 1106 SSHC25224F 3/8-16 X 3-1/2 HEX HEAD 1107 ZX5031 V-BELT,1/2X31 1AAC Drawing Number 9000787 Rev. 8

# Part # Description Qty Pg # Part # Description Qty Pg

1393C Parts Book


4

1389060 Exit Roller Assembly

1 1389058 PIVOT ARM WELDMENT RT 12 1389059 PIVOT ARM WELDMENT LT 13 1389063 BEARING KEEPER 44 1389132 BEARING KEEPER 2

5 BB60042RS BEARING,BALL,20 ID,42 OD 26 BB62022RS BEARING,RADIAL,SEALED 27 SSBCM6X10 M6 X 10MM BUT HEAD 48 CJ-2-15-001 EXIT ROLLER ARRev. 1



1393C Parts Book

5

1389078 Material Sensor Assembly

1 1389075 EYE MOUNTING BRACKET 12 FFRK44T-4 CABLE,EYE,12',NO END 1

3 FFSM312LVQ BANNER MINI-BEAM 1Rev. 0


1393C Parts Book


6


1393C Parts Book

7

1389113 Cross Cut Assembly

1 1389095 DUAL MOTOR PLATE 12 1389163 PULLEY ASSY, DUAL 13 1389170 PULLEY ASSY 24 1389333 CLOSURE PLATE 15 1389334 CLOSURE PLATE 16 1389335 DUAL BELT GUARD RT 17 1389340 DUAL BELT GUARD LEFT 18 1389342 TAB, JOINER 19 1393390 HUB CAP, BLADE RETAINER110 1393403 SPACER, TEMP 111 1393432 COVER, MOTOR J BOX 212 BB6002-ZZ BEARING,BALL,.590B 213 BBLBD200P BUSHING, BALL LINEAR 4

14 CJ-2-14-003C BEARING BLOCK 115 CJ-2-14-010 BRACKET, ALIGNMENT 216 CJ-2-14-01C-M CROSS CUT BLADE MTG 117 CJ-2-14-06C COLLAR, SET RETAINER 218 CJ-2-9-020 BLADE, 280MM SLITTER 119 GG210XL050 BELT,GEAR,1/5P,1/2W,105T 220 MM7310K32 STRAIN RELIEF, 12mm 221 MMJW6314 MOTOR 1400 RPM 222 SSBCM4X8 M4 X 8MM BUT HEAD 223 SSBCM5X8 M5 X 8MM BUT HEAD 224 SSBCM6X12 M6 X 12MM BUT HEAD 425 SSFCM8X20 M8-1.0 X 20 FLAT ALLEN 326 WWFM6 6MM FLAT WASHER 4Rev. 2


1393C Parts Book


8

1389170 Pulley Assembly

1 1389171 PULLEY, 1/5P, 24T, 1/2" B 12 1389173 FLANGE, PULLEY 24T 2

3 SSBCM4X8 M4 X 8MM BUT HEAD 64 SSSSM4X8 M4-0.7X8 CUP PT. SS 2Rev. 0



1393C Parts Book

9

1389172 Lift Roller Sensor Assembly

1 1389125 BRACKET, SENSOR 12 1393373 PLATE, NUT, 4-40 1

3 EENI5Q18AN6X SENSOR, PROX. NPN 14 SSSC70048 #4-40 X 3/4 SOC CAP 2Rev. 0


1393C Parts Book


10


1393C Parts Book

11

1389212 Back Panel Electrical Assembly

1 1-035 BACK PANEL AR2 AAFP0-C32T-A CONTROLLER,PLC,W/32 I/OAR3 AAFP0-E32T-A EXPANSION UNIT, PLC AR4 EEASK1 BLOCK, FUSE,TERMINAL 45 EECN11I6-NC CONTACTOR,IEC,230VAC 26 EECN11I6-NO CONTACTOR,IEC,230VAC AR7 EECN25RI6 CONTACTOR,IEC,230VAC AR8 EEDC1LG DUCT,WIRE COVER,1 AR9 EEDC3LG DUCT,WIRE COVER,3 AR10 EEDF1X2 DUCT,WIRE,1X2 AR11 EEDF3X2 DUCT,WIRE,3X2 AR12 EEDPA51CM44 MONIT, RELAY, 3 PHASE AR13 EEDR12024 POWER SUPPLY, 24VDC 114 EEEK2535 TERMINAL BLOCK, EK2.5/35415 EEEK635 TERMINAL BLOCK, EK2.6/35216 EEEPF2 END PLATE, FUSE BLOCK 117 EEP18524DC RELAY, INTERFACE 24VDC 8

18 EERHN1015A RELAY,OVERLOAD,1.0-1.5 219 EERHN1021A RELAY,OVERLOAD,1.4-2.1A 320 EERHN1036A RELAY,OVERLOAD,2.4-3.6A AR21 EERHN105A RELAY,OVERLOAD,3.5-5.0A 122 EESAK25EN TERMINAL BLOCK, SAK2.5 623 EESAK6EN TERMINAL BLOCK, SAK6/EN624 EETS35X7.5 DIN RAIL AR25 FFL7101C CIRCUIT BREAKER,THERM AR26 FFL7161C CIRCUIT BREAKER,THERM AR27 FFL721C CIRCUIT BREAKER,THERM AR28 FFL7323C CIRCUIT BREAKER,THERM AR29 FFL741C CIRCUIT BREAKER,THERM AR30 FFL761C CIRCUIT BREAKER,THERM AR31 MM6986K617 FUSE,2A,250VAC 432 NAIS-IN16P INTERFACE, INPUT, 16B AR33 WTBM00220 TERMINAL, FORK,14-16GA 100Rev. 4


1393C Parts Book


12

1389224 Dancer Bar Assembly

1 1389110 ROLLER, BSW 12 1389225 GRIPPER ASSY, WIRE 43 1389441 STANDOFF, CABLE 14MM 14 1389442 STANDOFF, CABLE 5MM 15 1393805 STAND-OFF, DANCER , TOP 26 BB618002RS BEARING,10mm, 19mmOD 47 BB62052RS BEARING,25mm ID, 52mm 28 BB6262RS BEARING,6mm ID, 19mm 29 BBNAP205-25 BEARING, P BLOCK, 25MM 210 CJ-2-8-002A ROLLER, DANCER AR

11 CJ-2-8-007 FLOATING BEARING ROD AR12 CJ-2-8-008A BEARING MOUNT, DANCER AR13 CJ-2-8-009 BUSHING, DANCER AR14 CJ-2-8-011A-1 FIXTURE, LOWER AR15 CJ-2-8-012 CABLE PULLEY AR16 CJ-2-8-015 STANDOFF, CABLE PULLEY AR17 CJ-2-8-016 BEARING RETAINER AR18 CJ-2-8-019B-1 BRACKET, 8-019B-1 AR19 CJ-2-8-019B-2 BRACKET, 8-019B AR20 MM3458T46 ROPE,WIRE,SS,3/32" 44'Rev. 3



1393C Parts Book

13

1389245 Winder Assembly

1 1389241 DRIVE SUPPORT WLDMNT 12 1389250 ROD SUPPORT WELDMENT13 1389261 COVER, MOTOR WINDER 14 1389263 BELT GUARD, INNER 15 1389472 CLOSURE PLATE,GUARD 16 1389491 TRAY ASSEMBLY 17 1393058 CRADLE ASSY 2 178 1393139 TAKE UP DRIVE ROD 19 1393260 DRIVE DOG 110 1393301 TABLE LOCKING ASSY 211 1393333 CLUTCH SHAFT 112 1393334 BLOCK,BEARING,30MM 113 1393357 SHAFT, OUTPUT 114 1393364 RETAINER WASHER 115 1393365 KEY, CLUTCH 116 1393366 KEY, DRIVE DOG 117 1393368 KEY, SMALL PULLEY 118 1393369 KEY, GEARMOTOR 119 1393491 BRKT,ANTI-ROTATION 120 1961-331 MOUNT, MOTOR 1

21 AA2001F-03 FLOW CONTROL,INLINE 122 AAMSR20008 REG,0-140 W/GAUGE 123 AAQME-4-4 ELBOW, MALE,1/4X1/4NPT 224 AAQMEL-5-8 QUICK MALE ELBOW,LONG 125 MM2419K15 CONNECTOR 126 MM805275 CLUTCH,AIR,1.0 B,370 IN-L 127 MM9307K63 GROMMET,1/2ID 228 MM9307K69 GROMMET,5/8,1.125,.125GV129 MM9565K8 PLUG,BLACK, 2" SQ 330 MMD35 (32"LG) CHAIN,STEEL, DBL #35-2 32"31 MMD35B22M1 SPROCKET,22T,DBL,NO35 132 MMD35B48M1 SPROCKET,48T,DBL,NO35 133 MMD35CL MASTER LINK,DBL,#35 134 MMRV0501-30 MOTOR, 3PH, 1-30 GEAR 135 SSSC01048 1/4-20 X 3/4 SOC CAP 436 SSSCM10X75 CAP SCREW 10MM X 75MM 437 SSSCM8X120 SOCKET HEAD SCREW 238 SSSCM8X25 M8-1.25 X 25 SOC CAP 439 SSSCM8X70 SCREW,SOC CAP,M8X25 440 WWFS1/4 WASHER FLAT, 1/4 4Rev. 6


1393C Parts Book


14

1389258 Panel Table Assembly

1 1389256 TOP PANEL, RIGHT 12 1389259 TOP PANEL, LEFT 13 1389706 PIVOT, TABLE 24 1393091 TOP PANEL, CENTER 15 1393095 EXIT TABLE WELDMENT 1

6 1393125 EYE ADJUSTMENT ASSY 1 187 1393300 LEVER, EYE ADJUSTMENT 18 MM1910A23 RULER,SILVER MYLAR 36 19 MM1910A43 RULER,SILVER MYLAR 36 110 SSAS024024 3/8 X 3/8 X 5/16-18 SHLD 2Rev. 1



1393C Parts Book

15

1389860 Slitter Assembly

1 1389079 BLADE RETAINER 112 1389857 DRIVE SHAFT,2300MM 13 1389858 DRIVE SHAFT, 300MM 24 1389859 COUPLING,30MM X 4 IN 2

5 1389873 BLADE HOLDER 116 1389874 MOUNT,ANGLE,BEARING 27 BBUCP206 BEARING, PILLOWBLOCK 28 CJ21100900 BLADE,40MM ID,205MM OD 11Rev. 0


1393C Parts Book


16

1393029 Slitter Sharpener Assembly

1 1393003 SHARPENER STONE MT 22 1393028 BRKT,STONE MTG 13 1393030 NUT,FLOATING,M6 14 1393031 ROD,GUIDE,6MM DIA 25 1393032 BRKT,CYL MTG 16 AAC7S-.5 CYLINDER,AIR,SA 1

7 AAQMC-4-8 QUICK MALE CONN,1/4X1/8 18 NNJ1/4-28 1/4-28 HEX JAM NUT 19 SSSCM4X16 M4-0.7 X 16 SOC CAP 410 SSSSM4X4 M4 SET SCREW, 4MM L 211 WWFS1/4 WASHER FLAT, 1/4 1Rev. 4



1393C Parts Book

17

1393058 Cradle Assembly

1 1393057 SUPPORT,REWIND SHAFT 12 BBMCYR10SX CAM FOLLOWER,10 ID 6

3 SSASM10M16M SHOULDER BOLT 10mm 6Rev. 1


1393C Parts Book


18

1393125 Eye Adjustment Assembly

1 1393122 MOUNTING BLOCK, EYE 52 1393123 GLIDE ROD, EXIT EYE 23 1393124 POSITION ROD, EXIT EYE 14 1393130 PIVOT BLOCK 15 1393297 POINTER, EYE ADJUST 1

6 EESS20N4A SENSOR,PHOTOELECTRIC 57 MM6324K170 M6 X 16mm 58 SSSCM4X20 M4-0.7 X 20 SOC CAP 129 WWFS1/4 WASHER FLAT, 1/4 1Rev. 1



1393C Parts Book

19

1389896 Slitter Sharpener Assembly

1 1389875 MOUNT, END, 30MM SHAFT 22 1389877 ROD,30MMX2720,60 CASE 1

3 1389879 TUBE SUPPORT, 30MM 14 1389884 SHARPENER ASBLY 2Rev. 0


1393C Parts Book


20

1393160 Rear Guard Assembly

1 1393598 SPACER, LOCKOUT AR2 1393899 REAR,GUARD 13 MM3042T33 U-BOLT,GUILLOTINE,ZINC 14 MM65665K32 SAFETY SWITCH 25 MMELH149 LATCH HANDLE 2

6 NNH10-32 #10-32 HEX NUT 47 NNH3/8-16 3/8-16 HEX NUT 28 SSSC98096 #10-32 X 1-1/2 SOC CAP 49 WWFS10 WASHER, FLAT #10 410 WWL10 #10 LW 4Rev. 4



1393C Parts Book

21

1393230 Lubrication Assembly

1 AAQMC-5-8 QU. MALE CONN 5/32X1/8 12 AAQME-4-8U QUICK MALE ELBOW,1/4 13 AAQME-5-8 QUICK MALE ELBOW 14 AAQME-M4-M6 QUICK ELBOW CONN 115 AAQUY-5-5 QUICK UNION Y, 5/32 4

6 AATP4X2MW TUBING,NYLON,5/32OD 75 FT7 MM34237-402 PLUG,PORT 18 MM78035PL INJECTOR,YELLOW.025CC 119 MMXGS4012 PUMP,GREASE,12 STATION 1Rev. 1


1393C Parts Book


22

1393282 Sharpener Assembly

1 1393029 SLITTER SHARPENER ASY 1 162 1393281 BRKT, MTG SHARPENER 13 1393402 NUT PLATE 14 SSSCM5X14 SCREW,SOC CAP,M5-0.8 2

5 SSSCM6X20 M6-1.0 X 20 SOC CAP 26 WWFS1/4 WASHER FLAT, 1/4 27 WWL1/4 1/4 LW 28 WWL8 #8 LW 2Rev. 1



1393C Parts Book

23

1393310 Table Stop Assembly

1 1393240M ARM STOP WELDMENT 12 AAQMC-5-8 QU. MALE CONN 5/32X1/8 13 AAQME-5-8 QUICK MALE ELBOW 14 AAV41-P34T VALVE,SPOOL,4-WAY 15 MM4554K11 PLUG, 1/8" PIPE 16 NNH3/8-16 3/8-16 HEX NUT 1

7 NNHM3X0.5 NUT,HEX,M3-0.5 68 SSHC25224F 3/8-16 X 3-1/2 HEX HEAD 19 SSSCM3X30 M3-0.5 X 30 SOC CAP 310 WWF4 WASHER, FLAT #4 611 WWL4 #4 LW 3Rev. 1


1393C Parts Book


24

1393312 Lock Pin Valve Assembly

1 1393311 MOUNTING BRACKET 12 AAQMC-4-8 QUICK MALE CONN,1/4X1/8 13 AAQMC-5-8 QU. MALE CONN 5/32X1/8 14 AAQME-4-8 ELBOW,QUICK MALE,1/4 35 AAV341A HUMPHREY VALVE 2

6 AAV41-PP HUMPHREY VALVE,4 WAY 17 NNHM3X0.5 M3 X 0.5 HEX NUT 38 SSSCM3X25 M3-0.5 X 25 SOC CAP 39 WWFS6 WASHER, FLAT, #6 610 WWL6 WASHER,LOCK,6 3Rev. 1



1393C Parts Book

25

1393372 Dancer Bar Switch Assembly

1 1393371 BRACKET, SENSOR 12 1393373 PLATE, NUT, 4-40 1

3 EENI5Q18AN6X SENSOR, PROX. NPN 14 SSSC70048 #4-40 X 3/4 SOC CAP 2Rev. 0


1393C Parts Book


26

1393381 Solenoid Assembly

1 1393377 SOLENOID,6 VALVE ASM 12 1393378 SOLENOID,6 VALVE ASM 13 AAN103X235 MUFFLER,1/4" PUSH IN 14 AAN8MM MUFFLER,8MM PUSH IN 15 AAQBU-3-3 Bulkhead Union 1

6 AAQMF-144 6-STATION AIR MANIFOLD 17 AAQUT-3-3 QUICK UNION T 3/8X3/8 38 AAVF51FM1B AIR/ELEC PRESSURE SW 19 CJ-2-1-017A PLATE, VALVE MOUNT 1Rev. 4



1393C Parts Book

27

1393394 Regulator Assembly

1 1393392 BRACKET, VALVE MOUNTING12 AAMSR20008 REG,0-140 W/GAUGE& BRKT2

3 AAQME-4-4 ELBOW, MALE,1/4X1/4NPT 4Rev. 4


1393C Parts Book


28

1393407 Clamp Weldment Assembly

1 1389062 PIVOT SHAFT 22 1389161 CROSS CUT CLAMP 13 1393710 LEVER ARM WELDMENT 2

4 MM5109K24 FOAM SILICONE 3/32 X 15’ 20’5 SSSCM10X30 M10-1.5 X 30 SOC CAP 2Rev. 0



1393C Parts Book

29

1393676 Encoder Assembly

1 13-005 12 1389794 CABLE, ENCODER 13 1393668 COUNTER ARM, MOVING 14 1393670 BRACKET, STAND-OFF 1

5 1393675 PIVOT PIN ASSEMBLY 16 NNHM4X0.7 M4 X 0.7 HEX NUT 27 RRLE030CD7 SPRING,EXT,.030X.31X2.0 18 SSSCM4X16 M4-0.7 X 16 SOC CAP 2Rev. 2


1393C Parts Book


30

1393751 Edge Cutter Assembly

1 1389611 MOTOR,STEPPER,W/CORD 22 1389780 RAIL,LINEAR, SIDE TRIM 13 1389913 CABLE, ASSEMBLY 24 1393702 OFF-SET SPACER 65 1393703 SPACER BLOCK 67.7mm 46 1393733 BKT, SENSOR MOUNTING 2

7 1393842 EDGE CUT LEFT 1 338 1393852 EDGE CUT RIGHT 1 359 CJ-2-9-010 210 CJ-2-9-014 MOTOR MOUNT ANGLE 211 CJ-2-9-100 EDGE CUTTER SUPPORT 112 SN05-N SENSOR 2Rev. 3



1393C Parts Book

31

1393770 Front Guard Assembly

1 1393762 UPPER FRNT GUARD WELD12 1393763 DOOR,GUARD,LH 13 1393764 DOOR,GUARD,RH 1

4 FF3210 STRAIN RELIEF, 9MMHUB 25 MM65665K32 SAFETY SWITCH 26 MMELH149 LATCH HANDLE 2Rev. 0


1393C Parts Book


32


1393C Parts Book

33

1393842 Left Edge Cut Assembly

1 1389206 PULLER ASSEMBLY 12 1389535 SPACER, EDGE CUTTER AR3 1389753 MOTOR PLATE, EDGE CUT 14 1389756 BELT GUARD, EDGE CUT 15 1389786 TRIM BLADE BEARING ASM46 1389895 PULLEY ASSY 17 1393247 DEFLECTOR PLATE, LEFT 18 1393390 HUB CAP, BLADE RETAINER19 1393481 MOUNT FIXTURE WLDMNT 110 1393619 FLAG, SENSOR 1

11 1393694 SPACER 112 1393695 SPACER 55mm 413 1393700 BEARING BLOCK 114 1393715 BLADE MOUNT, EDGE CUT 115 1393722 FOOT, EDGE CUTTER 116 1393745 DRIVE BRACKET WLDMNT 117 BB60032RS BEARING,17MM ID, 35MM 218 GG210XL050 BELT,GEAR,1/5P,1/2W,105T 119 MMJW7124 MOTOR 120 SSFCM8X16 FLAT HEAD SCREW 3Rev. 2


1393C Parts Book


34


1393C Parts Book

35

1393852 Right Edge Cut Assembly

1 1389206 PULLER ASSEMBLY 12 1389535 SPACER, EDGE CUTTER AR3 1389753 MOTOR PLATE, EDGE CUT 14 1389759 BELT GUARD, EDGE CUT 15 1389786 TRIM BLADE BEARING ASM46 1389895 PULLEY ASSY 17 1393246 DEFLECTOR PLATE, RIGHT 18 1393390 HUB CAP, BLADE RETAINER19 1393480 MOUNT FIXTURE WLDMNT 110 1393619 FLAG, SENSOR 111 1393694 SPACER 1

12 1393695 SPACER 55mm 413 1393700 BEARING BLOCK 114 1393715 BLADE MOUNT, EDGE CUT 115 1393722 FOOT, EDGE CUTTER 116 1393745 DRIVE BRACKET WLDMNT 117 BB60032RS BEARING,17MM ID, 35MM 218 GG210XL050 BELT,GEAR,1/5P,1/2W,105T 119 MMJW7124 MOTOR 120 SSFCM8X16 FLAT HEAD SCREW 321 SSSSM5X6 M5-0.8X6 CUP PT. SS 2Rev. 3


1393C Parts Book


36

1393C-PD1 Pneumatic Diagram


1393C Parts Book

37

1393C-WD1 Wiring Diagram

1393C Parts Book


38



1393C Parts Book

39


1393C Parts Book


40



1393C Parts Book

41


1393C Parts Book


42



1393C Parts Book

43


1393C Parts Book


44



1393C Parts Book

45


1393C Parts Book


46


Atlanta Attachment Company (AAC)Statement of Warranty

Manufactured ProductsAtlanta Attachment Company warrants manufactured products to be free from defects in material and workmanship for a period of eight hundred (800) hours of operation or one hundred (100) days which ever comes first. Atlanta Attachment Company warrants all electrical components of the Serial Bus System to be free from defects in material or workmanship for a period of thirty six (36) months.

Terms and Conditions:• AAC Limited Warranty becomes effective on the date of shipment.• AAC Warranty claims may be made by telephone, letter, fax or e-mail. All verbal claims must be con-

firmed in writing. • AAC reserves the right to require the return of all claimed defective parts with a completed warranty

claim form.• AAC will, at its option, repair or replace the defective machine and parts upon return to AAC. • AAC reserves the right to make the final decision on all warranty coverage questions. • AAC warranty periods as stated are for eight hundred (800) hours or one hundred (100) days which

ever comes first. • AAC guarantees satisfactory operation of the machines on the basis of generally accepted industry

standards, contingent upon proper application, installation and maintenance.• AAC Limited Warranty may not be changed or modified and is not subject to any other warranty

expressed or implied by any other agent, dealer, or distributor unless approved in writing by AAC in advance of any claim being filed.

What Is Covered• Electrical components that are not included within the Serial Bus System that fail due to defects in

material or workmanship, which are manufactured by AAC are covered for a period of eight hundred (800) hours.

• Mechanical parts or components that fail due to defects in material or workmanship, which are manu-factured by AAC.

• Purchased items (sewing heads, motors, etc.) will be covered by the manufacturer's (OEM) warranty. • AAC will assist in the procurement and handling of the manufacturer's (OEM) claim.

What Is Not Covered• Parts that fail due to improper usage, lack of proper maintenance, lubrication and/or modification.• Damages caused by; improper freight handling, accidents, fire and issues resulting from unauthorized

service and/or personnel, improper electrical, plumbing connections.• Normal wear of machine and parts such as Conveyor belts, "O" rings, gauge parts, cutters, needles, etc.• Machine adjustments related to sewing applications and/or general machine operation.• Charges for field service. • Loss of time, potential revenue, and/or profits.• Personal injury and/or property damage resulting from the operation of this equipment.

Atlanta Attachment Company (AAC)Declaración de Garantia

Productos ManufacturadosAtlanta Attachment Company garantiza que los productos de fabricación son libre de defectos de material y de mano de obra durante un periodo de ochociento (800) horas de operación or cien (100) dias cual llega primero. Atlanta Attachment Company garantiza que todos los componentes del bus serie son libre de defectos de material y de mano de obra durante un periodo de treinta y seis (36) meses.

Términos y Condiciones:• La Garantia Limitada de AAC entra en efecto el dia de transporte. • Reclamos de la Garantia deAAC pueden ser realizados por telefono, carta, fax o correo electrónico.

Todo reclamo verbal tiene que ser confirmado via escrito.• AAC reserva el derecho para exigir el retorno de cada pieza defectousa con un formulario de reclamo

de garantia.• AAC va, según su criterio, reparar o reemplazar la máquina o pieza defectuoso devuelto para AAC. • AAC reserva el derecho para tomar la decisión final sobre toda question de garantia.• Las garantias de AAC tiene un validez de ococientas (800) horas o cien (100) dias cual llega primerlo. • AAC garantiza operación satisfactoria de sus máquinas en base de las normas aceptadas de la indus-

tria contigente en la instalación y mantenimiento adecuada.• La garantia de AAC no puede ser cambiado o modificado y no está sujeto a cualquier otra garantia

implicado por otro agente o distribuidor menos que sea autorizado por AAC antes de cualquier rec-lamo.

Lo Que Está Garantizado• Componentes eléctricos que no está incluidos dentro del sistema Bus Serie que han sido manufactura-

dos por AAC son garantizados por un periodo de ochocientas (800) horas.• Mechanical parts or components that fail due to defects in material or workmanship, which are manu-

factured by AAC. • Componentes comprados (Motores, Cabezales, ) son protegidos debajo de la garantia del fabricante.• AAC asistirá con el manejo de todo reclamo de garantia bajo la garantia del fabricante.

Lo Que No Está Garantizado• Falla de repuestos al raiz de uso incorrecto, falta de mantenimiento, lubricación o modificación.• Daños ocuridos al raiz de mal transporte, accidentes, incendio o cualquier daño al resultado de servi-

cio por personas no autorizados o instalaciones incorrectas de conecciones eléctricas o neumáticas. • Desgaste normal de repuestos como correas, anillos de goma, cuchillos, agujas, etc. • Ajustes de la máquina en relación a las aplicaciones de costura y/o la operación en general de la

máquina.• Gastos de reparaciones en el campo. • Pérdida de tiempo, ingresos potenciales, y/o ganancias. • Daños personales y/o daños al propiedad al resultado de la operacion de este equipo.

© 2008 Atlanta Attachment Company. All rights reserved.

© 2008 Atlanta Attachment Company. Derechos reservados.

Atlanta Attachment Company, Inc.11393C Main Assembly1393029 Slitter Sharpener Assembly1393058 Cradle AssemblyAssembly Drawings & Parts Lists1393125 Eye Adjustment Assembly1393160 Rear Guard Assembly1389896 Slitter Sharpener Assembly1393230 Lubrication Assembly1389113 Cross Cut Assembly1393310 Table Stop Assembly1393372 Dancer Bar Switch Assembly1393381 Solenoid Assembly1393751 Edge Cutter Assembly1393394 Regulator Assembly1389212 Back Panel Electrical Assembly1393407 Clamp Weldment Assembly1389224 Dancer Bar Assembly1393770 Front Guard Assembly1393C-PD1 Pneumatic Diagram1393C-WD1 Wiring Diagram1393C-WD2 Wiring Diagram1393C-WD3 Wiring Diagram1393C-WD4 Wiring Diagram1393C-WD5 Wiring Diagram1393C-WD6 Wiring Diagram1393C-WD7 Wiring Diagram1393C-WD8 Wiring Diagram1393C-WD9 Wiring Diagram1393C-WD10 Wiring Diagram1393282 Sharpener Assembly1389060 Exit Roller Assembly1389078 Material Sensor Assembly1389170 Pulley Assembly1389172 Lift Roller Sensor Assembly1389245 Winder Assembly1393842 Left Edge Cut Assembly1393852 Right Edge Cut Assembly1389258 Panel Table Assembly1389860 Slitter Assembly1393312 Lock Pin Valve Assembly1393676 Encoder Assembly

Revision 4 - Atlanta Attachment Co.€¦ · manual before attempting to operate the machine....

Documents

Transcript of Revision 4 - Atlanta Attachment Co.€¦ · manual before attempting to operate the machine....