G R E E N L I N E

www.pezzolato.itVia Prov. Revello 89, Envie (CN)Tel. +39 0175 278077 - Fax +39 0175 278421 - info@pezzolato.it

Pezzolato SpA

Plank LineRed LineGreen Line

PTH 900/820 E

PTH 30.70

Drum wood chipper with big feeding hopper

Drum ChipperPTH 30.70

2

PTH 30.70It’s the basic model of the range, however, it is appreciated for the typically robust structure of Pezzolato drum chippers, ensuring reliability and excellent performance.The machine has been designed to ensure for operator the ease of use and to minimize maintenance costs. The wear parts of all machines are cost effective

and simple to replace in short maintenance times.Powered by tractor Power Take Off or provided with autonomous diesel engine.The big hopper, the upper roller of large dimensions and the lower roller facilitate the material’s inlet in the chipping apparatus. The machine can be fed either manually or with

Space saving during transportation Big feeding hopper

3

PTH 30.70

Multi-knives system drum These chippers guarantees the production of calibrated chips

mechanical means. For manual feeding the chipper is equipped with a robust safety bar that provides safety using the machine.The cutting system characterized by the closed drum and the sieving grid that is interchangeable depending on the requirements, allow to obtain a uniform and homogeneous wood chips even for the boilers of domestic use.

The fan with a large diameter allows to eject the chips through the discharge pipe fitted, at the end, of adjustable deflector.The NO STRESS electronic device, supplied as standard, automatically regulates the in-feed of material according to the available power.

www.pezzolato.it

www.pezzolato.itVia Prov. Revello 89, Envie (CN)Tel. +39 0175 278077 - Fax +39 0175 278421 - info@pezzolato.it

Pezzolato SpA

Plank LineRed LineGreen Line

PTH 900/820 E

Pezzolato Officine Costruzioni Meccaniche SpA Via Provinciale Revello, 89 | 12030 Envie (CN) ITALIATel. +39 0175 278077 | Fax +39 0175 278421 | info@pezzolato.it

NO STRESS electronic device, available on all standard machines, automatically regulates the in-feed of material according to the available power

Sieving grids for chip calibration with different sizes, easy to replace

Radio or cable remote control, to manage the chippers main activities at a distance

Removable security bar, for hand or crane feeding

Low- or high-speed towing trailer, with air or hydraulic brakes

Forestry cranes, with or without cabin, in customized configuration

“M version” machine, driven by Diesel engine

EXTRAS AND CONFIGURATIONS

Sieving gridsForestry cranes

Radio remote control

TECHNICAL DATA PTH 30.70

Minimum tractor power: Hp 70

Maximum tractor power: Hp 130

Diesel engine power: Hp 126

Maximum inlet passage: mm 640 x 300

Knives: n° 3

Maximum chipping diameter*: mm 300

Drum width: mm 640

Drum diameter: mm 520

Upper and lower roller width: mm 640

Hourly troughthput*: m3/h 18 - 25

PTH

 30.

70 |

07 •

18 |

ENG

DEALER

Prog

ress

and

con

stan

t res

earc

h m

ay m

odify

som

e te

chni

cal d

ata

and

desc

riptio

ns a

s des

crib

ed in

this

leafl

et, w

ithou

t Pez

zola

to S

pA w

arni

ng it

s rea

ders

.

Driven by Diesel engine

* Diameters and declared production are variable according to the available power, wood type and chip size.