BENEFITS• The heavy-duty Morbark PTO brush chippers are ideal for landscapers, golf

course owners, private land-owners and others who have access to a commercial tractor.

• Morbark PTO brush chippers are available in 8", 12" and 15" chipping capacities.

• Mounted on a heavy-duty pedestal stand for even weight distribution, these durable chippers have a feed rate of up to 103 feet per minute.

• Important features include a folding infeed tray (optional on M12R), self-contained hydraulics, Morthane paint system and multiple positions to attach a category 1, 2 or 3 three-point hitch.

• Like all Morbark equipment, the Beever PTO is a long-lasting, durable machine backed by a world-class parts and service support team.

Universal 3-Point HitchThe PTO’s universal 3-point mount fits most tractor manufacturers.

360o Swivel Discharge360o swivel discharge provides controlled chip direction to put chips right where they're needed.

Self-Contained Hydraulic SystemPTO models are equipped with a self-contained hydraulic system with lockable reservoir, shut-off valve, sight gauge, drain plug and clean-out cover.

Folding Infeed TrayThe folding infeed tray shortens transport lengths and increases maneuverability (optional on M12R).

SPECIFICATIONS SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS 10/10/14

MORBARK® BEEVER™ PTO BRUSH CHIPPERS

800.831.0042989.866.2381www.morbark.com

PO Box 10008507 S. Winn Rd.Winn, MI 48896

General M8D PTO M12R PTO M15R PTOChipping capacity ...................................8" ......................................12" .................................... 15"Height .................................................7'2" ................................. 8'7 ½" ................................8'6 7/8" Width ...............................................3'11" ................................. 7'7 ½" ...............................7'9 3/16"Length ............................................ 6'1 ½" ............................... 5'11 ¼" ................................5'4 7/8"Weight (approximate) ..................2,100 lbs. .............................3,520 lbs. ........................... 4,800 lbs.Infeed opening ............. 33 ½" w x 24 ½" h ...............48 ¾" w x 30 ¾" h .................... 45" w x 33" hThroat opening ............. 12" wide x 8" high ............ 15" wide x 12" high ........20½" wide x 15" highChipper type ....................................... Disc ....................................Drum ..................................DrumDisc or Drum ............1 ¼" thick x 28" diam ........ 14 ½" w x 21 3/8" diam. .......23 ¾" w x 21 3/8" diam.Tractor horsepower ..................... 25–50 HP .......................... 50–100 HP .......................100–150 HPPTO speed ................................... 540 RPM ................540 or 1,000 RPM .............. 540 or 1,000 RPMHydraulic oil capacity ....................9 gallons .............................. 9 gallons .......................... 11 gallonsFeed Rate ...................................... 75 FPM .............................. 103 FPM .............................103 FPM

Equipment HighlightsMorthane Paint System: A chemically cured, electrostatically applied urethane coating with high-gloss finish, built-in UV protection, chip and chemical resistance and corrosion protection

Feed wheel compression system with spring-assisted down pressure (M12R and M15R have hydraulic lift assist and manually applied hydraulic down pressure at the valve handle)

Disc with 4" x 3/8" dual-edged chipper knives and four full-length, bolt-on, chip throwing paddles (M8D)

Drum with two dual-edged chipper knives and integrated air impeller system (M12R and M15R)

Options IncludeVariable speed flow controlAutomatic feed systemCustom paint and logo packages