Programme overview Interior - Approved...
Transcript of Programme overview Interior - Approved...
Sto AG | Interior
Programme overview
Interior
Sto Building with conscience.
Creative interior finishes | Page 22
Contents | Interior coatings overview
3
Introduction | Page 4
Ecology and the environment | Page 6
The StoSystem | Page 10
Substrate primers | Page 11
Interior plasters | Page 12
Interior paints | Page 16
Interior profiles | Page 20
Acoustic systems | Page 30
StoColor System | Page 8
Interior coatings overview | Introduction
4
When designing an interior space, the unification of function and
aesthetics is essential. Sto interior products are tailored towards
this holistic approach. Easy and economic application as well as
respect for the environment in the use of plasticizers and solvents
are all considered by Sto to ensure a healthy atmosphere and ensure
better quality of life.
More room for quality of life.
Promoting wellbeingIn contrast to the past, we now spend most of ourtime indoors: We live and work indoors, and evenour leisure time is spent for the most part inside.More than ever, individual and stylish design is ofkey importance to wellbeing and quality of life. Awell considered approach to the use of form, colourand materials ensures compliance with high qualityrequirements.
Sto AG’s response to this new lifestyle is a uniqueprogramme of high-quality interior coatings andfinishes. These products meet all technical require-ments, provide for a healthy environment and openup vast scope for creative design.
Only the best is good enoughAesthetic and functional coatings for interiors aresubject to a variety of demands. Sto has a suitableinterior coating to meet every need. This ensuresthat building owners, planners, tradesmen andcraftsmen can always be provided with the idealsolution for their specific requirement. Individualtaste plays a decisive role when it comes to interior
design. Other influencing factors include currenttrends, historical terms of reference and regionalpeculiarities. Different functions and modes of usefor spaces and different types of substrate are alsoinstrumental in determining the right choice ofinterior coating.
Safe investmentSto’s ongoing development of its interior productsand systems guarantees the very highest standardsof material quality and workability. This results incrucial added value: For building owners, theassurance that their investment is economicallyviable. For planners, craftsmen and tradesmen,increased efficiency and know-how to enable them to cope with increasingly tight time and costconstraints at the construction site and to increasethe added value of their work.
5
Mercedes-Benz branch, Germany.
Environmentally-friendly construction materials which present
no health hazards are a central requirement today. Sto pursues
a pragmatic approach here: Intensive research and development,
the best natural raw materials and systematic quality assurance.
A complete range of non-toxic interior products.
Environment-friendliness takes priorityA key aspect of Sto’s research efforts focuses onreconciling product quality with environmentalcompatibility. In cases of doubt, Sto decides infavour of the environment. The monitored selectionof raw materials guarantees cadmium- and lead-freeinterior coatings. Sto’s coatings are low on emis-sions and totally free of solvents and plasticizers.
The pacesetter for products free of harmfulsubstancesSto developed the first solvent- and plasticizer-freeproducts 15 years ago. The ongoing developmentwork gives rise to outstanding results: Today, Stooffers arguably the most comprehensive range ofnon-toxic interior products, all of which meet thestringent requirements of the Federal EnvironmentAgency. The products are tested by the GermanTÜV (Technical Control Board) on a regular basis.
What is E.L.F.?E.L.F. is a German abbreviation which stands for“emission- and solvent-free”. The term originatesfrom the 1980s, and is no longer considered to beapt. The term neglects the volatile compounds(VOC) which were already known when “E.L.F.”first came into usage. The term “low-emission” isthus more accurate. The legislative bodies and testinstitutes also use the term “low-emission”.
Effectively countering the fogging effectE.L.F. qualities set standards not only in terms ofcompatibility with environmental and healthrequirements. Plasticizer-free products are alsorecommendable on aesthetic and economicgrounds. They are proven to reduce the risk of the so-called fogging effect, which takes the formof soot-like, black-grey deposits on the walls andceilings of old and new buildings.
A complete programmeBuilding owners, craftsmen and tradesmen canalways rely on the TÜV-approved interior productsfrom Sto. The complete system of primers, paints,plasters and decorative interior finishes underlinesSto’s pioneering role in the field of environmentalawareness.
Interior coatings from Stoare based on natural rawmaterials and reduce the so-called fogging effect.
Ecology and the environment | Interior coatings overview
7
Wall coatings which arecertified to be free of harmful
substances are particularlyrecommendable for rooms
which are used by children.
Children’s aftercare clinicTannheim, Germany.
1
2
3
4
5
6
12341
23
41
23
41 2 3 4
1
23
41
23
4
yellow
orangered
violet
blue
gree
n
8
Far from being a random matter, the well-aimed use of colour
in a manner which complements the architecture is subject to
specific laws. The StoColor System provides a clear framework
and a systematic approach to colour design based on subtly
nuanced colour concepts to provide high aesthetic appeal.
A systematic approach to colour design.
A structured system offering enormous varietyThe StoColor System is a unique planning instru-ment for the use of colour. A total of 800 differentcolours establish a sound foundation for creativeand pioneering colour concepts.
The StoColor System eschews colorimetric logic infavour of the human perception of colour. It isbased primarily on the colours yellow, orange, red,violet, blue and green. These six sections are thenmixed to form the 24 basic tones which correspondto the 24-part colour wheel.
Each basic tone is assigned five colour rows whichembody the principle of the same-colour triangle.This guarantees the StoColor System’s high degreeof functionality – designed in line with the aestheticcolour requirements in construction.
Interior coatings overview | StoColor System
StoColor System | Interior coatings overview
9
Colour fileThe A4 format colour file displays all 800 colours of the StoColor System, accompanied by key itemsof information, such as the lightness value or thefeasibility of the colour in the appropriate binder.The colour file is suited to initial orientation andselection of individual colours and colour areas.
Colour fanThe classic tool for planners and craftsmen. Allcolours are arranged according to the six colourperception areas. Coloured index leaves simplifyorientation.
Colour editionThe professional design tool for architects andplanners: Six handy colour fans containing all thecolours of the system. As a supplement, each fanincludes the grey rows and represents these, likethe colours, over entire card surfaces. All the fansare stored in a stable box with integrated carryhandle.
Colour sample boxThe colour sample box contains 800 cards in A5format which are particularly useful for collages orcomprehensive colour schemes. If the entire spec-trum of colour samples is not required, individualcolour leaves can be ordered via the colour sampleservice, which is also able to supply additional cardsfor the sample box.
Product sample serviceSample boards in A3 format facilitate decisions on site. They are available in every colour. For thecreation of display surfaces small containers ofmixed original material can be ordered.
StoDesignStoDesign was founded in 1977 as one of the firstprofessional colour studios at the headquarters ofSto AG. Today the central location for the nowinternational network of StoDesigners can be found here. StoDesign views itself as a partner forbuilding-owners, planners and applicators who seek to realise unified and harmonious architecture.
European Parliament, France.
The elements of theStoColor System – uniqueplanning instruments forcreative colour design.
Researching realityEvery room is different. Optimum results are dependent on the large variety of products andsystems which Sto is able to offer on the basis ofextensive development work and intensive testing.Conversely, all findings and experience from prac-tical operations at the building are fed back to theSto research centre. This input makes a valuablecontribution to continuous product optimisation.
More than 100 qualified staff pursue the ongoingdevelopment of all Sto products, employing state-of-the-art measuring and testing equipmentto this end.
Supplying high-quality interior coatings is a crucial task. Ensuring that
these coatings achieve optimum overall results for each project poses
a different, far more complex challenge. And as the overall result is
the overriding priority for Sto, all product systems are backed up by
unique services relating to the areas of planning and application.
StoSystem: an all-encompassing proposition.
Materials and machineryA perfectly co-ordinated range of innovative machinery and application equipment togethereffectively exploits the additional potential forincreased efficiency. Sto implements new, moreeffective technical processes in a swift and profes-sional manner in conjunction with equipmentmanufacturers and the sister company Inotec GmbH.
Research, development and testing are conducted at Sto’s laboratories.
Sto | Service
Sto
| Log
istics
Sto
| Pro
duct
s
Sto | Engineering and technology
Interior coatings overview | The StoSystem
Substrate primers | Interior coatings overview
Only when the substrate fulfils certain criteria is it possible to
apply the final coating quickly, effectively and in the desired quality.
Substrate coatings from Sto guarantee reliable, system-tested
preparation for every wall.
In harmony with the substrate.
Options to suit all needsSto offers a value-retaining and durable solution for the preparation of interior walls and ceilings to meet the needs of every application. From theregulation of absorption and adhesion capacitythrough to the levelling of uneven areas.
PrimersThe primers for interior applications are of majorimportance in preparing the substrate for subse-quent coatings. A substrate which is too absorbentis equally as unsuitable as a substrate which has noabsorption capacity whatsoever. The comprehen-sive range of primers from Sto ensures the idealpreparation for every type of substrate.
Intermediate plastersThe intermediate plasters from Sto offer outstand-ing application properties. The classic StoLevell In is available as an organically bound manual inter-mediate plaster and as an organically bound sprayplaster. Airless equipment and a spiral pump guarantee efficient application. The programme is rounded off by the inorganically bound inter-mediate plaster StoLevell In Fill for smoothing andfilling.
Eurosoft company, France.
Optimum substrate treatment is a vital prerequisite for durable final coatings.
Interior coatings overview | Interior plasters
12
The interior plasters from Sto open up vast design scope for virtually
any room scenario. Elegant surfaces offering high standards of
technical quality: first-class water vapour diffusion values, minimal
maintenance requirements and good resistance to mechanical strain.
Lively structures between shadow and light.
Everything you need for creative interior designThe structures of plaster are shown off to besteffect under the influence of light and shadow. Its appearance changes continually, depending onthe angle of vision and the incidence and intensityof light. Stippled, rilled and free-style structuralplasters in various grain sizes enable countlessindividual variations. Further scope is provided by the possibility of combination with the coloursand creative finishes from Sto.
A complete programmeStoDecolit is the name of the all-rounder for interiorsurfaces. The high-quality, organically bound finish-ing plaster is solvent- and plasticizer-free and lowon emissions. StoDecolit guarantees a high level ofresistance to mechanical stress combined with amaximum resistance to soiling. StoDecolit alsoprovides plenty of scope for design: The tried andtested interior finishing plaster is available with astippled or rilled structure, in various grain sizes oras a free-style structural plaster for a rustic effect. Itcan be through-coloured individually in accordancewith the StoColor System.
The interior plasters programme is rounded off byStoMiral Kalk, the inorganically bound, ready-to-uselime plaster.
Natural stone plasters collectionThe extremely hard wearing natural stone plasters,StoRoccolit and StoGranit, are also organicallybound. They fulfil the same quality standards asStoDecolit and are available in diverse colourranges.
Materials in proven qualityIn addition to the huge variety, the interior plastersalso offer exceptional technical and functionalqualities. First-class water vapour diffusion valueskeep walls dry. Their physiologically harmless rawmaterials guarantee a healthy and pleasant indoorenvironment. Easy care, good resistance to mecha-nical stress and excellent fire properties round offthe merits of the interior plasters programme.
13
“Opera du Rhin”,Strasbourg.
14
The tried and tested interior plasters from Sto enable visually
appealing, technically sound and durable solutions to be developed
for any room. Sto has an appropriate product to meet every
requirement. The tables opposite provide a concise overview.
From coarse to fine in every colour.
Stippled structure
Rilled plaster
Free-stylestructural plaster
StoDecolit
StoMiral Kalk
Interior plasters | Appearance
* for StoDecolit only
Colour variety with the interior plasters in accordance with the StoColor System.
Grain size1,0*/1,5/2,0/3,0 mm
Grain size1,5/2,0/3,0 mm
Interior plasters | Interior coatings overview
15
RC 400 RC 410 RC 420 RC 430 RC 440 RC 450
RC 460 RC 470 RC 480 RC 490 RC 500 RC 510
RC 520 RC 530 RC 540 RC 550
ColoursStoRoccolit
Natural stone plasters | Appearance
824 837 838 839
800 801 802 803 804 806
808 809 812 813 814 821
ColoursStoGranit
*For technical reasons relating to the printing process, the depicted colours may differ from the original colours.
Colours have a direct effect, arouse emotions and play a greater role
than other design elements in defining the atmosphere of rooms.
Sto’s comprehensive colour range provides the necessary scope for
the most extravagant interior designs.
Colour concept with the feel-good factor.
Diverse colour needsGood colour design for interiors requires a profes-sional and versatile range of resources, as require-ments vary enormously: The appropriate colouringfor workplaces differs from that for homes. A child-ren’s nursery requires different colours to a hospital.
A complete rangeThe paints from Sto cover all functional and designrequirements for interior applications. The rangecomprises a large number of organically bounddispersion and latex paints with an excellent andlong-standing track record. There are silicate- andinorganically bound interior paints. The programmeis rounded off by interior stains and lacquers andfull-colour and tinting dispersion paints.
Interior coatings overview | Interior paints
Interior paints | Interior coatings overview
17
User benefitsThe entire spectrum of colours from Sto offers excellent hiding power. Regular tests confirm theproducts’ environment-friendliness. Sto’s tintingservice obviates the need for users to carry outtheir own complicated and time-consuming mixingoperations.
Crescent House, Great Britain.
18
High standards in terms of application properties, physical characteri-
stics and aesthetic appeal make the interior paints from Sto the ideal
coating method for every room concept. As diverse as the require-
ments are, a paint from the Sto programme is always the right choice.
Proven quality for all requirements.
StoColor RapidPhysiologically harmless, matt, organically bound,single-coat dispersion paint with excellent hidingpower and high whiteness (wet abrasion category 3in accordance with DIN EN 13 300). Solvent- andplasticizer-free, low-emission. Seal of approval fromthe German TÜV (Technical Control Board). Free ofactive fogging substances and totally hygienic withregard to interior air requirements.
StoColor InWashable, organically bound, filling dispersion paint in accordance with DIN 53 778. High degreeof whiteness and excellent coverage. Solvent andplasticizer free as well as low on emissions with theGerman TÜV seal of approval. Free from foggingsubstances, matt white, off-white, tintable inaccordance with the StoColor System.
StoSil InMatt silicate paint in accordance with DIN 18 363,free of preservatives. High whiteness, very goodhiding power. Solvent- and plasticizer-free, low-emission. Seal of approval from the German TÜV(Technical Control Board). Free of active foggingsubstances (wet abrasion category 3 in accordancewith DIN EN 13 300).
StoColor LatexAn environmentally friendly range of scrubbablelatex paints with good covering power and highwhiteness. Solvent- and plasticizer-free, low-emission. Seal of approval from the TÜV (TechnicalControl Board). Free of active fogging substances and totally hygienic with regard to interior air requirements (wet abrasion category 2 in accor-dance with DIN EN 13 300). StoColor Latex 3000(matt, filling), StoColor Latex 4000 (silk matt,filling), StoColor Latex 5000 (silk gloss, structure-retaining), StoColor Latex 9000 (gloss, structure-retaining).
StoColor Isol WWater-based, isolating, organically bound dispersionpaint for problematic substrates (e.g. nicotine, soot,lignin). High whiteness, good hiding power, tension-free (wet abrasion category 2 in accordance withDIN EN 13 300). Matt, white, off-white AW11/AW15, limited suitability for tinting in accordancewith the StoColor System.
StoColor ProtectFungicidal, acrylate-based dispersion paint to pre-vent mildew. Very good hiding power, good fillingcapacity. Solvent- and plasticizer-free (wet abrasioncategory 2 in accordance with DIN EN 13 300).Matt, white, off-white, tintable in accordance withthe StoColor System. Certified for food-processingcompanies.
StoPuran ColorTwo-component, solvent-free, water-dilutablepolyurethane varnish paint, decontaminable andresistant to disinfectants, weak acids and alkalis and mineral lubricants. For high mechanical stress(e.g. on glass fibre mesh, concrete, gypsum). Forkitchens, bathrooms, toilets, hospitals. Excellentcolour stability. Silk finish. White, tintable in accor-dance with the StoColor System.
Economy and good hiding power are the hallmarks of the interior paints from Sto.
Interior paints | Interior coatings overview
Organically bound dispersion paints
StoColor Rapid | matt | | | |
StoColor In | matt | | | |
StoColor | | | | |DIN white WM matt |
Organically bound latex paints
StoColor | | | | |Latex 3000 matt
StoColor | | | | |Latex 4000 silk matt finish
StoColor | | | | |Latex 5000 silk gloss finish
StoColor | | | | |Latex 9000 gloss
Organically bound special paints
StoColor Isol W | matt | | | |
StoColor Isol | matt | | | |
StoColor Protect | matt | | | |
StoPuran Color | silk matt finish | | | |
Silicate-bound paints
StoSil In | matt | | | |
Inorganically bound paints
Sto-Warofix Interior | matt | | | |
Colour choice Gloss level Hiding power Whiteness Scrub resistance TÜV seal of approval
Characteristics | Interior paints
very high/very good
high/good
low
no/unsuitable
all colours of the StoColor System
certain colours of the StoColor System
natural colour only/white only
20
Whether you go for the classic, modern or avant-garde look:
StoDeco Art is the perfect system for stylish interior detailing.
The high-quality material offers an outstanding combination of
low weight, high compressive strength and easy application. The
exclusively mineral structure guarantees a healthy environment.
StoDeco Art: Interior profiles for stylish living.
Contemporary decorative featuresEmbellishing decorative features have been theepitome of stylish living for centuries and remainhighly popular to this day. There are good reasonsfor designing these features with StoDeco Art. The high-quality design elements in the granularmaterial Verofill are extremely shock-proof andimpact-resistant. Their low weight facilitatesinstallation.
Fast and simple installationThe decorative profiles from Sto are supplied to the building site in prefabricated form. This savesproduction and adaptation work. The very lightcomponents can be quickly and simply attached to ceilings and walls with the aid of the systemadhesive, and combine harmoniously with existingstucco elements where necessary. In addition to allthe required accessories for fixing purposes, Stoalso supplies the appropriate installation tools.
Design varietyThe StoDeco Art programme covers a comprehen-sive range of standard profiles: Wall and ceilingdado profiles, corner tracks and rosettes, rectan-gular columns and capitals, plinth profiles, lightingelements and mirrors. On request, Sto is also ableto produce special profiles, such as precision profilesegments for listed historical buildings. Sto alsosupports planners in the area of design details andcolouring.
Ceiling and wall profiles
Plinth profiles
Mirrors
Rectangularcapitals/skirtings
Rosettes
Corner profiles
Rectangularcolumns
Interior coatings overview | Interior profiles
Interior profiles | Interior coatings overview
21
Versatility to the fore – StoDeco Artis a unique system for stylish interiordesign.
Creative surface finishes are currently enjoying enormous popularity.
Their special character helps to define a room’s atmosphere. The
decorative coatings from Sto offer plenty of lively variety, providing
planners and building owners with virtually boundless design scope.
Decorative finishes for individual demands.
Lucrative field of workUp-market interior design is a boom area. Theprestigious design of wall and ceiling surfaces offerscraftsmen an opportunity to make their mark. The diversity of creative finishes from Sto opens upparticularly attractive areas of work.
High-quality, elegant solutions are available to cover various design wishes. All products combinehigh technical requirements with complete designfreedom.
Key focus on varietySto’s creative Linea di calce plasters are the undis-puted highlight. The ready to use wall and ceilingfinishes allow for particularly efficient working.They are sprayed on, without any joints. The effectinterior coatings in metallic style or with reflectivecomponents provide further highlights. The durabledecorative glass weave coverings for walls andceilings round off the programme.
Interior coatings overview | Creative interior finishes
23
Creative interior finishes | Interior coatings overview
Linea di calce offers a quality of wall covering to meet the requirements of exquisite suites and elegant apartments.
24
Sto’s high-quality Linea di calce product system is based on the
natural raw materials marble, lime and water. It offers fascinating
possibilities for designing rooms with a unique ambience.
Atmospheric interiors with Mediterranean flair.
Traditional decorative materialThe raw materials marble, lime and water on whichLinea di calce is based were already known as build-ing and decorative materials in ancient Greece andEgypt. In the more recent past, the use of thesematerials has been developed and refined above allin northern Italy, the home of carrara marble. Lineadi calce from Sto represents a continuation of thistradition offering unique design variations.
Aesthetic and functionalThe Linea di calce product system from Sto consistsof three basic components and a supplementarysystem glaze. The components offer great scope forcombination.
StoLook Mamorino. The pinnacle of refinement. Apurely organically bound, lime-based intermediateplaster containing the finest marble powder. StoLook Marmorino may be applied in thin layers toproduce extremely smooth surfaces displaying greatbrilliance of colour and fascinating depth effects.
StoLook Fondo. The inorganically bound smoothintermediate plaster, based on lime and fine marblepowder. The coating can be felted, smoothed or structured as desired with modelling tools toproduce elegant, matt surface finishes.
StoLook Effetto. Produces mineral matt surfaceswith exclusive gold glimmer effects. The surfacesproduce fascinating visual highlights under theeffect of light.
StoLook Lasura. This transparent, tintable stainwash complements the Linea di calce system fromSto. Can be applied to StoLook Fondo to producetypically Venetian or Tuscan mural effects, forexample.
Hotel Cantera. The interior’sMediterranean charm stemsfrom the wall and ceilingcoating with Linea di calcefrom Sto.
Interior coatings overview | Creative interior finishes
Creative interior finishes | Interior coatings overview
25
StoLook Marmorino
StoLook Fondo
StoLook Effetto
StoLook Lasura
26
Design variety, safety and economical use are the key merits of the
wall and ceiling coatings from Sto. These decorative, hard-wearing
coatings are available in numerous colours.
Ready to use wall and ceiling coatings featuring
attractive textures.
Fascinating highlightsThe play of light and shadow of structured wallfinishes enlivens interiors. The changing light revealsan endless array of different tones and textures. Thehard-wearing wall finishes can be applied manuallyor sprayed for increased efficiency.
StoLook DecoperlWashable, matt ceiling coating with a pronouncedsurface structure. High whiteness. Contains rigidfoam granules, sprayable. Solvent- and plasticizer-free, low-emission. Seal of approval from the TÜV (Technical Control Board). Free of active foggingsubstances.
StoLook DecorWashable, structured coating. Solvent- and plasti-cizer-free, low-emission. Seal of approval from theTÜV (Technical Control Board). Free of active foggingsubstances. Available in three different structures,tintable, sprayable.
StoLook StrukturTexturing dispersion paint for all forms of appli-cation, e.g. brush, sponge, etc. (wet abrasioncategory 2 in accordance with DIN EN 13 300).Solvent- and plasticizer-free, low-emission. Seal of approval from the TÜV (Technical Control Board).Free of active fogging substances, tintable.
The special-effect wall and ceiling coatings from Sto are also ideal for rooms which are subject to heavy use.
Interior coatings overview | Creative interior finishes
Creative interior finishes | Interior coatings overview
27
The effect and multicolour coatings from Sto provide for coloured
highlights on interior walls. They employ special colouring pigments,
reflective, glittering mica chips, coloured flakes or multicolour chips
to produce extraordinary mural effects.
Effect coatings:
A fascinating interplay of light and colour.
StoLook OnyxTransparent dispersion coating containing coarse,mother of pearl-type reflective mica chips. Forcoating effects on existing coatings (wet abrasioncategory 2 in accordance with DIN EN 13 300).
StoLook DiamantTransparent dispersion coating containing tiny,mother of pearl-type reflective mica chips. Forcoating effects on existing coatings (wet abrasioncategory 2 in accordance with DIN EN 13 300).
StoLook PrismaGlazing dispersion coating containing fine, colouredspecial-effect pigments in seven different colours.May be applied in a vast number of techniques(wet abrasion category 2 in accordance with DIN EN 13 300).
StoColor MetallicDispersion coating with metallic look for smoothand rough surfaces. For application with specialSto-Effect roller (wet abrasion category 2 in accor-dance with DIN EN 13 300).
StoLook MaximoMulticolour coating system comprising 29 colours.Scratch- and shock-proof after final coating. Corres-ponds to wet abrasion category 2 in accordancewith DIN EN 13 300. Solvent- and plasticizer-free,low-emission. Seal of approval from the TÜV (Tech-nical Control Board). Free of active fogging sub-stances. Comprising adhesive, coloured flakes andtransparent protective finish (matt and silk glossfinish).
StoLook PiccoloReady-to-apply, silk matt finish, multicolour chipscoating system in 78 colours, combinable with theDiamant, Gold and Silver effects. Of limited com-bustibility, scratch- and shock-proof and resistant to cleaners and disinfectants.
StoLook MaximoStoLook Piccolo
StoLook Prisma
StoLook Onyx
StoLook Piccolo
Attractive, versatile and extremely hard-wearing: StoTex decorative
glass weave has proven itself as an appealing, safe and durable
coating for walls and ceilings.
StoTex: Decorative glass weave wall coverings.
Robust and versatileStoTex decorative glass mesh coverings consistingof pure, environmentally neutral glass yarns are rot-resistant, non-combustible, chemical-resistant,odourless and resistant to fungus and bacterialattack. The quality of the product range is evidentin the ease of application. The mesh remains dimen-sionally stable and unaffected by wet, enabling it to be adjusted over a prolonged period. Simple toinstall around corners and edges by means of adouble cut.
The special edge cut and interwoven matchingthreads for difficult patterns guarantee neat, invisible seams. The resultant wall coverings appearto consist of one single piece. StoTex is also ideal as a reinforcing material to bridge cracks.
StoTex can be coated in a large number of systemvariations. A particularly attractive option is thespecial finish with StoLook Metallic, for example.
Ideal for large wall areas: StoTex decorative glass mesh.
Interior coatings overview | Creative interior finishes
Creative interior finishes | Interior coatings overview
29
Avantgarde 300Block stripe
Avantgarde 305Stripe
Avantgarde 310Stone pattern
Avantgarde 315Dune
Avantgarde 320Wave
Avantgarde 325Wash finish
Decorative glass mesh featuring exclusive structures
Structures
StoTex Avantgarde | Appearance
Avantgarde 330Chequered
Avantgarde 335Square
Avantgarde 340Flame
Avantgarde 345Ice
100Cloth
105, 106 PSuper-fine
110, 111 P, 112 SHFine
115Fine
120, 121 P, 122 SHMedium
125Medium
Decorative glass mesh featuring classic structures
Structures
StoTex Classic | Appearance
130Coarse
135, 136 PSuper-coarse
140, 141 PDouble thread
145, 146 SHFine jute
150Coarse jute
155Dots
160Window
165Fine stripe
170, 171 PHerringbone
Classic 175Diagonal
Classic 180Wickerwork
Classic 185Crepe
30
Acoustic stimuli also influence our perception of space. The multi-
function acoustic systems from Sto optimise the acoustic conditions
in rooms while at the same time providing striking design highlights.
Acoustic systems: A sound proposition.
Acoustics and designThe seamless acoustic systems from Sto improveacoustic conditions in rooms through the specificabsorption or reflection of sound waves. Theyregulate reverberation times and minimise disturb-ing noise.
A further advantage of these high-tech products isthe broad design scope which they offer. Primers,adhesives and special tools round off the compre-hensive acoustic programme.
StoSilent PanelStoSilent Panel, the tried and tested basic panel forsuspended ceiling and wall constructions, achievesan outstanding sound absorption factor of 80 percent on average. This panel is available in a numberof variants and formats, can be installed withoutjoints over an area of up to 200 square metres andmeets the highest design requirements. Apart fromthe stylish elegance of a seamless, even surface,StoSilent Panel can also be used to produce step-ped structures and three-dimensional effects. Therobust Panel enables various types of wall junctionsin the edge area.
For surface design purposes, the sound-permeabletop coat StoSilent Superfein is available in over 460colours from the StoColor System, while the veryfinely textured StoSilent Top coat (with speciallycoordinated system components) comes in white.
StoSilent A-Tec PanelSafety and enhanced fire protection are a primaryconsideration above all for public and semi-publicbuildings such as academic and medical establish-ments and meeting halls and for ceilings over rescue and escape routes.The innovative acoustic element StoSilent A-TecPanel is employed whenever non-combustible wallsand ceiling linings are required (building materialsclass A2 in accordance with DIN 4102).Similarly to the basic element, it can be installedwithout joints over areas of up to 200 square met-res and possesses outstanding acoustics-enhancingproperties at a sound absorption factor averaging85 per cent. The acoustically transparent top coatStoSilent Superfein features a stylish surface finishoffering broad scope for individual colour design.
The Sto Acoustic Systems set the tone in conference rooms, cinemas, concert halls and exhibition halls.
Acoustic systems | Interior coatings overview
Acoustic plastersThe acoustic plasters from Sto are applied directlyto the substrate. They are suitable for use wherevera structural system is not possible for physicalreasons relating to the building structure. Plaster is available for manual application or spraying,depending on the type of surface concerned. A range of surface finishes from fine to rough ispossible.
Acoustic wall coverings and paintsThe Sto-Silentyl acoustic covering reduces reverbe-ration times, thereby optimising effective communi-cation in meeting rooms. Sto-Silentyl is a structured,open-pored glass fibre mesh on an acoustics-enhancing backing of soft foam matting. The broadcolour range offered by StoSilent Color accordingto the StoColor colour card and coloured connec-tion profiles enables numerous design variants.
StoSilent Panel
Sto Acoustic Plaster
Sto Acoustic Spray Plaster
Sto-Silentyl
StoSilent A-Tec Panel
Head Office
Sto Ltd.
2 Gordon Avenue
Hillington Park
Glasgow G52 4TG
Tel +44 (0)141 892 8000
Fax +44 (0)141 404 9001
www.sto.co.uk
Southern Office & Distribution Centre
Sto Ltd.
Antura
Kingsland Business Park
Wade Road
Basingstoke RG24 8EN
Tel +44 (0)1256 332770
Fax +44 (0)1256 810887
Midlands Training & Distribution Centre
Sto Ltd.
Unit 700
Catesby Park
Kings Norton
Birmingham B38 8SE
Tel +44 (0)121 459 5149
Fax +44 (0)121 459 0632
Ireland Office & Distribution Centre
Sto Ltd.
Unit 69
Western Parkway Business Park
Lower Ballymount Road
Dublin 12
Tel +353 (0)1460 2305
Fax +353 (0)1460 2455
www.sto.ie