Automated Intruder Tracking using Particle Filtering and a Network of Binary Motion Sensors
Particle Sensors Comparison 2019 - System Plus€¦ · ©2019 by System Plus Consulting | Particle...
Transcript of Particle Sensors Comparison 2019 - System Plus€¦ · ©2019 by System Plus Consulting | Particle...
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 1
PPD71
22 Boulevard Benoni Goullin44200 NANTES - FRANCE +33 2 40 18 09 16 [email protected] www.systemplus.fr
HPMA115S0-XXX SDS011 PMS 7003 SPS30
GP2Y1010AU0F PPD42NJ
Particle Sensors Comparison 2019Report by Benjamin PussatSeptember 2019 – version 1
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 2
Table of Contents
Overview / Introduction 4
o Executive Summary
o Particle Sensor Market
o Overview
Specifications Comparison 9
o Main Features
o Block Diagrams
o Dimensions
Physical Comparison 28
o Teardown / Part Collection
o Electronic Boards
o Comparison Table : Chipset & other parts
Cost Comparison 64
o BoM Cost
o Added-Value Cost
o Manufacturing Cost
Company Services 82
o Company Services
o Contact
o Legal
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 3
Overview / Introduction• Executive summary• Particle Sensor Market• Overview
Specifications comparison
Physical comparison
Cost comparison
About System Plus
Executive Summary
System Plus Consulting has analyzed, compared and reviewed seven different particle sensors from six manufacturers :
o HPMA115S0-XXX from Honeywell
o SDS011 from Nova Fitness
o PMS 7003 from Plantower
o SPS30 from Sensirion
o GP2Y1010AU0F from Sharp
o PPD42NJ from Shinyei Technology
o PPD71 from Shinyei Technology
These particle sensors use light-scattering principle in order to detect particles and measure their concentration in the air.
This report compares the different sensors features, structure, chipset, optical parts, and then estimates a bill of materialscost, added-value cost and manufacturing cost.
Plus, are available all the teardown photos, components identifications, PCBs characteristics, several IC die photos.
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 4
Overview / Introduction• Executive summary• Particle Sensor Market• Overview
Specifications comparison
Physical comparison
Cost comparison
About System Plus
Particle Sensor Market
© Yole Développement
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 5
Overview / Introduction• Executive summary• Particle Sensor Market• Overview
Specifications comparison
Physical comparison
Cost comparison
About System Plus
Particle Sensor Market
© Yole Développement
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 6
Overview / Introduction• Executive summary• Particle Sensor Market• Overview
Specifications comparison
Physical comparison
Cost comparison
About System Plus
Overview
HPMA115S0-XXX
Main characteristics:• Laser-based light scattering particle
sensing• PM2.5, PM10 output • Concentration range: 0 to 1,000 µg/m3• Max accuracy: +- 15µg/m3• Response time: < 6 s• Lifetime up to 10 years• Ope. temperature: -20°C to +50°C• Dimensions (LxWxH): 43x36x23.7mm
Applications: • HVAC (commercial & residential)• Indoor/handled air quality monitors• Air purifiers (commercial & residential)• Automotive cabin air purifiers• Market introduction : N/A
Datasheet
SDS011
Main characteristics:• Laser-based light scattering particle
sensing• PM2.5 & PM10 output • Concentration range: 0 to 999.9 µg/m3• Max accuracy: +- 10µg/m3• Response time: <10s• Lifetime up to 8,000 working hours• Ope. temperature: -10°C to +50°C• Dimensions (LxWxH): 71x70x23mm
Applications: • HVAC (commercial & residential)• Indoor/handled air quality monitors• Air purifiers (commercial & residential)
• Market introduction : 2015 (estimation)
Datasheet
PMS 7003
Main characteristics:• Laser-based light scattering particle
sensing• PM1.0, PM2.5 & PM10 output
Concentration range: 0 to 1,000 µg/m3• Max accuracy: +- 10µg/m3• Response time: <10 s• Lifetime > 3 years• Ope. temperature: -10°C to +60°C• Dimensions (LxWxH): 48x37x12mm
Applications: • HVAC (commercial & residential)• Indoor/handled air quality monitors• Air purifiers (commercial & residential)
• Market introduction : 2016
Datasheet
SPS30
Main characteristics:• Laser-based light scattering particle • sensing• PM1.0, PM2.5, PM4.0, PM10 output
Concentration range: 0 to 1,000 µg/m3• Max accuracy: +-10µg/m3• Response time: N/A• Lifetime > 8 years• Ope. temperature: -10°C to +70°C• Dimensions (LxWxH): 41x41x12mm
Applications: • HVAC (commercial & residential)• Indoor/handled air quality monitors• Air purifiers (commercial & residential)
• Market introduction : 2018
Datasheet
N/A : Non-available
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 7
SPECIFICATIONSCOMPARISON
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 8
Overview / Introduction
Specifications comparison• Main features• Block Diagrams• Dimensions
Physical comparison
Cost comparison
About System Plus
Block Diagram – Honeywell HPMA115S0
Display Module
PCB Antenna
Laser Diode(on PCB)
BiconvexLens
Air inlet
Air outlet
Photodiode(on PCB)
NPNOpAmp
+ Filtering
Laser DiodePhotodiode
Light trap
MOSFET
PW
M f
eed
bac
k
TX
PCB
MCU(Algorithm)
RX
1 8
Power Conversion(LDO Regulator)
Connector
Fan
Particle
Air flow
Emitted light
Scattered light
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 9
Overview / Introduction
Specifications comparison• Main features• Block Diagrams• Dimensions
Physical comparison
Cost comparison
About System Plus
Dimensions (Sensirion SPS30)
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 10
P H Y S I C A LCOMPARISON
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 11
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Teardown – Plantower PMS 7003
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 12
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Part Collection – Shinyei PPD71
Top Cover(ABS*, 7.1g)
Main Board(Top side)
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 13
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Electronic Board – Plantower PMS 7003 – IC Opening
XXXXXXXXX Logo +
Die part number
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 14
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Electronic Board – Sensirion SPS30
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 15
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Electronic Board – Sensirion SPS30
SunonMF20060V2-1C010-G99
Fan 5V 0.32W 20x20x6mm Wired
Manufacturer Website
Mnfr Not IdentifiedP/N Not IdentifiedLaser Diode Module
15.5x6mm, Aperture 3mm
PCB Manufacturer : Introlines IndustrialPCB Manufacturing Country : Hong KongPCB Characteristics : IT-402M
Electronic Board Assembly/Test Date Code Electronic Board Part Number
PCB Manufacturing Date Code
Flame Rating
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 16
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Comparison table – Chipset N/A : Non-available
Product part : MCU Operational Amplifier Voltage Regulator Photodiode
SharpGP2Y1010AU0F
N/A Brand : SharpPart number : S126Description : ASIC TSSOP16
N/A Brand : SharpPart number : PD413PI2E00FDescription : IR Photodiode 960nm 150mW 90° Radial TH
ShinyeiPPD42NJ
N/A Brand : JRCPart number : NJM2902MDescription : IC OpAmp Quad 500kHz SO14
N/A Brand : Mnfr not identifiedPart number : P/N not identifiedDescription : IR Photodiode Side View with 3mm Diameter lens TH
ShinyeiPPD71
Brand : STMicroelectronicsPart number : STM8S003F3P6TRDescription : IC MCU 8-Bit 16MHz 8KB Flash TSSOP20
Brand : Hamamatsu (estimated)Part number : P/N not identifiedDescription : ASIC Photodiode + amplifier + I²C interface SOP12
Brand : Torex SemiconductorPart number : XC6223A331MR-GDescription : IC LDO Voltage Regulator 3.3V 300mA SOT23-5
Brand : Hamamatsu (estimated)Part number : P/N not identifiedDescription : ASIC Photodiode + amplifier + I²C interface SOP12
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 17
Overview / Introduction
Specifications comparison
Physical comparison• Teardown / Part Collection• Electronic Boards• Comparison Table
Cost comparison
About System Plus
Comparison table – Other parts N/A : Non-available
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 18
C O S TCOMPARISON
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 19
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
BoM Cost – Overview
The material cost corresponds to the purchasing price of the components (either electronic or not), as well asthe mechanical parts, composing the electronic system.
The price search of each reference is realized on the basis of catalogues and web sites of electroniccomponents distributors and manufacturers. It is often necessary to ask for specific quotations for sometargeted references.
Prices found during our researches among distributors and manufacturers are associated to quantities whichmay vary from a few units to several thousands or millions of pieces.
It is therefore mandatory to have reliable simulation rules that can be used for this type of extrapolation. Thesimulation rules used in this study come from previous analyses that have been conducted by System PlusConsulting and take into account parameters such as quantities, different types of distributors andmanufacturers, average profit margin on several types of products. These simulation rules have beenintegrated in the SYScost+ software to conduct the calculations.
When specific prices are given in EUR and USD, the conversion rate used is: 1 USD = 0.89 EUR.
The report details BOM cost for 1,000,000 units.
On the two next slides there is an example of the detailed BoM of a system and its material cost breakdown.
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 20
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
BoM Cost – Honeywell HPMA115S0 – Example
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 21
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
BoM Cost – Comparison table – Chipset N/A : Non-available
Product : MCU Operational Amplifier Voltage Regulator Photodiode
SharpGP2Y1010AU0F
N/A Brand : SharpPart number : S126Description : ASIC TSSOP16
$0.41/unit (1,000,000 units)
N/A Brand : SharpPart number : PD413PI2E00FDescription : IR Photodiode 960nm 150mW 90° Radial TH
$0.179/unit (1,000,000 units)
ShinyeiPPD42NJ
N/A Brand : JRCPart number : NJM2902MDescription : IC OpAmp Quad 500kHz SO14
$0.209/unit (1,000,000 units)
N/A Brand : Mnfr not identifiedPart number : P/N not identifiedDescription : Photodiode Side View with 3mm Diameter lens TH
$0.178/unit (1,000,000 units)
ShinyeiPPD71
Brand : STMicroelectronicsPart number : STM8S003F3P6TRDescription : IC MCU 8-Bit 16MHz 8KB Flash TSSOP20
$0.205/unit (1,000,000 units)
Brand : Hamamatsu (estimated)Part number : P/N not identifiedDescription : ASIC Photodiode + amplifier + I²C interface SOP12
$0.743/unit (1,000,000 units)
Brand : Torex SemiconductorPart number : XC6223A331MR-GDescription : IC LDO Voltage Regulator 3.3V 300mA SOT23-5
$0.099/unit (1,000,000 units)
Brand : Hamamatsu (estimated)Part number : P/N not identifiedDescription : ASIC Photodiode + amplifier + I²C interface SOP12
-
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 22
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
Product : Electronics Cost PCBs Cost Others Cost Total BoM Cost
Honeywell HPMA115S0
$0.88 $0.45 $6.57(Lens/Laser Diode/Fan...) $7.90
Nova Fitness SDS011
$1.08 $0.39 $7.06(Lens/Laser Diode/Fan...) $8.53
PlantowerPMS 7003
$0.77 0.31 $6.77(Lens/Laser Diode/Fan...) $7.85
SensirionSPS30
$1.00 $0.33 $6.55(Lens/Laser Diode/Fan...) $7.88
Sharp GP2Y1010AU0F
$0.74 $0.12 $1.06$1.92
ShinyeiPPD42NJ
$0.85 $0.19 $0.97$2.01
Shinyei PPD71
$1.13 $0.21 $1.13$2.47
BoM Cost – Comparison table – Whole System N/A : Non-available
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 23
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
$6.57 $7.06
$6.77
$6.55
$1.06
$0.97
$1.13
$0.88
$1.08
$0.77$1.00
$0.74
$0.85$1.13
$0.45
$0.39
$0.31 $0.33
$0.12$0.19 $0.21
BoM Cost Breakdown
BoM Cost – BreakdownOther parts BoM Cost
Electronics BoM Cost
PCB Cost
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 24
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
Added-Value Cost – Overview
Assembly
- The added-value cost of a product is the total cost of the operations for assembling and testing this product.
As shown below, it depends of several parameters as energy used, machine cost depreciation, labor cost, consumables, among many others.
- On the two next slides there is an example of the detailed hypotheses made for added-value cost calculation.
Consumables
Energy
Labor
Factory Deprec.
Machine Deprec.
MaterialsAssembled
Product
Maintenance
Rework/WasteYield
Added-value CostBoM Cost Manufacturing Cost+ =
…
…
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 25
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
Added-Value Cost – Honeywell HPMA115S0 – Electronic Board (Example) Step n° Step name Step Code Inline step? Side Auto/Manual Step Time (s) Equipment number Equip. Price (USD) Remark
1 Material preparation MP No - M 30s / reference 1 5,000
2 Storage buffer SB No - - 5s / board 1 20,000
3 Stencil printing SP Yes 2 A 20s / panel 1 200,000
4 Solder paste inspection SPI Yes 2 A 0.003s / pin 1 250,000
5 Chipshooter CS Yes 2 A 0.1-0.2s/comp. 1 900,000
6 Pick and place SMT P&P Yes 2 A 0.1-7.2s/comp. 1 450,000
7 Automated optical inspection AOI Yes 2 A 5s / panel 1 250,000
8 Reflow RF Yes 2 A 24s / panel 1 90,000
9 Automated optical inspection AOI Yes 2 A 5s / panel 1 250,000
10 Storage buffer SB No - - 5s / board - - Same machine as step n°2
11 Stencil printing SP Yes 1 A 20s / panel - - Same machine as step n°3
12 Solder paste inspection SPI Yes 1 A 0.003s / pin - - Same machine as step n°4
13 Chipshooter CS Yes 1 A 0.1-0.2s/comp. - - Same machine as step n°5
14 Pick and place SMT P&P Yes 1 A 0.1-7.2s/comp. - - Same machine as step n°6
15 Automated optical inspection AOI Yes 1 A 5s / panel - - Same machine as step n°7
16 Reflow RF Yes 1 A 24s / panel - - Same machine as step n°8
17 Automated optical inspection AOI Yes 1 A 5s / panel - - Same machine as step n°9
18 Storage buffer SB No - - 5s / board 1 20,000
19 In-situ test ICT No 1+2 A 7s / board 1 300,000
20 Functional test FCT No 1+2 A 3s / board 1 200,000
21 Storage buffer SB No - - 5s / board 1 20,000
22 Depaneling DP No 1+2 A 5s / board 1 40,000
23 Manual Assembly + Screwing MA No 1 M 15s / board 6 5,000 Laser Module
24 Manual Soldering MS No 1+2 M 45s / board 6 5,000 Laser Module/Shielding/Fan/Connector
25 Visual Inspection VI No 1+2 M 10s / board 6 5,000
26 Storage buffer SB No - - 5s / board 1 20,000
27 Board conditioning BC No - M 5s / board 1 3,000
Panel size : 78 Boards Total equipment price : $3,400,000
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 26
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
Added-Value Cost – Comparison table
Product : Electronic Board A-V Laser Diode Board A-V System A-V Total Added-Value Cost
Honeywell HPMA115S0
$0.52(Laser Diode+Lens+Spring assembly on this board)
$0.04(Laser diode on PCB
assembly only)
$0.21$0.77
Nova Fitness SDS011
$0.61 $0.19(Laser Diode+Lens+Spring
assembly included)
$0.18$0.98
PlantowerPMS 7003
$0.48 $0.14(Laser Diode+Lens+Spring
assembly included)
$0.18$0.79
SensirionSPS30
$0.28 $0.16(Laser Diode+Lens+Spring
assembly only)
$0.26$0.70
Sharp GP2Y1010AU0F
$0.25 N/A $0.10$0.35
ShinyeiPPD42NJ
$0.19 N/A $0.08$0.27
Shinyei PPD71
$0.30 N/A $0.21$0.51
N/A : Non-available
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 27
Overview / Introduction
Specifications comparison
Physical comparison
Cost comparison• BoM cost• Added-value cost• Manufacturing cost
About System Plus
Manufacturing Cost – Sensirion SPS30 – Example
For each system, a manufacturing cost can be calculated on the assembly/sub-assembly level. The Sensirion SPS30 Particle Sensor is composed of 3 main parts :
- A laser module which costs $4.97 ($4.81 of material & $0.16 of added-value).
- An electronic board which costs $1.74 ($1.46 of material & $0.28 of added-value).
- All the other parts which costs $1.87 ($1.61 of material & $0.27 of added-value).
The $8.58 Total Manufacturing Cost includes the all the Assembly Costs & the BoM Costs.
Article
QtyADDED VALUE
Manufacturing
Duration (s)
Particle Matter Sensor 1 0.26$ 120 1.61$ 1.86$
Electronic Board 1 0.28$ 53 1.46$ 1.74$
Laser Diode Module 1 0.16$ 80 4.81$ 4.97$
0.70$ 253 7.88$ 8.58$
SP19446 - Sensirion SPS30 Particulate Matter
SensorASSEMBLY COST
MATERIAL COST
MANUFACTURING
COSTwithout scrap
& supplying costs
TOTAL
ASSEMBLY
COST
MATERIAL
COST%
3.0% 18.7% 21.7%
3.3% 17.1% 20.3%
1.9% 56.1% 58.0%
8% 92% 100%
Electronic Board
SP19446 - Sensirion SPS30 Particulate Matter
Sensor
Particle Matter Sensor
TOTAL
Laser Diode Module
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 28
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Feedbacks
Linked report
About System Plus
Linked Report
Gas and Particle Sensors 2018
Air quality is breathing life into the sensor market!
Market and Technology Report by Yole Développement
Bundle offer possible with the Particle Sensor Comparison 2019, contact us for more information at [email protected].
Due to increasing air quality levelrequirements, air and gas particulatematter sensing has become an ever-growing market, particularly insemiconductor, indoor depollution andautomotive applications.
Only a few well-known companies sharethis market, which is worth more than$100 million today. Many products havealready been released in differentapplications, for different particle sizes.
However, these particle sensors mustrespect dimensional constraints to beintegrated into other systems. They mustoperate for years without maintenanceand have a reasonable selling price toreach as many areas as possible.
In this comparative report, System PlusConsulting analyzes seven particle sensorsfrom the top main manufacturers:Honeywell’s HPMA115S0-XXX, NovaFitness’ SDS011, Plantower’s PMS 7003,Sensirion’s SPS30, Sharp’sGP2Y1010AU0F, and Shiyei Technology’sPPD42NJ and PPD71.
In this analysis technical choices made bymanufacturers are highlighted, at theprinted circuit boards, electronic
components and hardware levels. Blockdiagrams help readers to understand thecomponent functions and the mechanicaldesign. Different tables compare thecommon chipsets and main partsidentified, their respective costs. Then,combined with manufacturinghypotheses, a manufacturing price isestimated for each system.
For further details on gas and particlesensors market and technology, consultYole Développement’s linked report.
COMPLETE TEARDOWN WITH
• Main features
• Block diagrams
• Teardown
• Printed circuit board characteristics and component identification
• Chipset comparison tables
• Added value comparison table
• Manufacturing cost comparison table
From detection to measurement, discover manufacturers’ technical choices anddevice manufacturing costs.
REVERSE COSTING® – STRUCTURE, PROCESS & COST REPORT
Title: ParticleSensor Comparison
Pages: 85
Date: September 2019
Format: PDF & Excel file
Price: EUR 6,490
Particle Sensor Comparison 2019
IC – LED – RF – MEMS – IMAGING – PACKAGING – SYSTEM – POWER - DISPLAY
TABLE OF CONTENTS
Overview/Introduction
• Executive Summary
• Particle Sensor Market
• Overview
Specification Comparison
• Main Features
• Block Diagrams
• Dimensions
Physical Comparison
• Teardown/Part Collection
• Electronic Boards
• Comparison Table : Chipset and Other Parts
Cost Comparison
• BoM Cost
• Added-Value Cost
• Manufacturing Cost
AUTHOR
PARTICLE SENSOR COMPARISON 2019
Benjamin Pussat has joined System Plus Consulting as a cost technician in 2017, He is incharge of reverse costing with a focus on boards and systems. He previously workds forSercel, Sagem S&D and SEIA where he was in charge of board testing and then hardwareand software development.He holds a Bacherlor's degree in electronics for the University of Nantes (Nantes, FR).
LINKED REPORT
Gas and Particle Sensors 2018 – Air quality is breathing lifeinto the sensor market!
Market and Technology Report by Yole Développement
Bundle offer possible with the Particle Sensor Comparison 2019, contact us for more information at [email protected].
BoM Cost – Comparison Table - Chipset
COSTING TOOLS
REVERSE COSTING® – STRUCTURE, PROCESS & COST REPORT
Process-BasedCosting Tools
ParametricCosting Tools
IC Price+
MEMS CoSim+
MEMS Price+
Power CoSim+
Power Price+
LED CoSim+
3D PackageCoSim+
DisplayPrice+
PCBPrice+
SYSCost+
SYSCost+It provides all component costs estimationincluding PCB, housing and connectors, and asimulation of the assembly cost and test process atthe board and system level.
IC Price+The tool performs the necessary cost simulation ofany Integrated Circuit: ASICs, microcontrollers,memories, DSP, smartpower…
PCB Price+It calculates the real price impacts of change tolayer count, copper thickness, change ofmanufacturing country, or the increasing of rawmaterial costs, such as gold or copper.
Our analysis is performed with our costing tools SYSCost +, IC Price+ and PCB Price+.
System Plus Consulting offers powerful costing tools to evaluate the production cost and selling price from
single chip to complex structures.
WHAT IS A REVERSE COSTING®?
Reverse Costing® is the process of disassembling a device (or asystem) in order to identify its technology and calculate itsmanufacturing cost, using in-house models and tools.
CONTACTS
ABOUT SYSTEM PLUS CONSULTING
System Plus Consulting is specialized
in the cost analysis of electronics
from semiconductor devices to
electronic systems.
A complete range of services and
costing tools to provide in-depth
production cost studies and to
estimate the objective selling price of
a product is available.
Our services:
• STRUCTURE & PROCESS
ANALYSES
• TEARDOWNS
• CUSTOM ANALYSES
• COSTING SERVICES
• COSTING TOOLS
• TRAININGS
www.systemplus.fr
Headquarters22, bd Benoni GoullinNantes Biotech44200 NantesFrance+33 2 40 18 09 [email protected]
Europe Sales OfficeLizzie LEVENEZFrankfurt am MainGermany+49 151 23 54 41 [email protected]
America Sales OfficeSteven LAFERRIEREWestern USA & Canada+1 [email protected]
Chris YOUMANEastern USA & Canada+1 919-607-9839 [email protected]
Asia Sales OfficeTakashi ONOZAWAJapan & Rest of Asia+81 80 4371 [email protected]
Mavis WANGGreater China+886 979 336 [email protected]
Peter OKKorea+82 10 4089 [email protected]
ORDER FORMPlease process my order for “Particle Sensor Comparison 2019” Reverse Costing® – Structure, Process & Cost Report Ref: SP19446
Full Structure, Process & Cost Report : EUR 6,490* Bundle offer possible with the Gas and Particle Sensors 2018
Market and Technology report by Yole Développement, contact us. Annual Subscription offers possible from 3 reports, including this
report as the first of the year. Contact us for more information.
SHIP TO
Name (Mr/Ms/Dr/Pr): .............................................................
Job Title: …….............................................................................
Company: ….............................................................................
Address: …….............................................................................
City: ………………………………… State: ..........................................
Postcode/Zip: ..........................................................................
Country: ……............................................................................
VAT ID Number for EU members: ..........................................
Tel: ……………….........................................................................
Email: .....................................................................................
Date: ......................................................................................
Signature: ..............................................................................
BILLING CONTACT
First Name : ............................................................................
Last Name: …….......................................................................
Email: …..................................................................................
Phone: ……..............................................................................
PAYMENT
By credit card:
Number: |__|__|__|__| |__|__|__|__| |__|__|__|__|
|__|__|__|__|
Expiration date: |__|__|/|__|__|
Card Verification Value: |__|__|__|
By bank transfer:HSBC - CAE- Le Terminal -2 rue du Charron - 44800 St Herblain FranceBIC code: CCFRFRPP• In EUR
Bank code : 30056 - Branch code : 00955 - Account : 09550003234 IBAN: FR76 3005 6009 5509 5500 0323 439
• In USDBank code : 30056 - Branch code : 00955 - Account : 09550003247 IBAN: FR76 3005 6009 5509 5500 0324 797
REVERSE COSTING® – STRUCTURE, PROCESS & COST REPORTPARTICLE SENSOR COMPARISON 2019
Each year System Plus Consultingreleases a comprehensive collectionof new reverse engineering andcosting analyses in various domains.You can choose to buy over 12months a set of 3, 4, 5, 7, 10 or 15Reverse Costing® reports.
Up to 47% discount!
More than 60 reports released eachyear on the following topics(considered for 2018):• MEMS & Sensors: Accelerometer
– Environment - Fingerprint - Gas - Gyroscope - IMU/Combo -Microphone - Optics - Oscillator -Pressure
• Power: GaN - IGBT - MOSFET - Si Diode - SiC
• Imaging: Camera - Spectrometer• LED and Laser: UV LED – VCSEL -
White/blue LED• Packaging: 3D Packaging -
Embedded - SIP - WLP• Integrated Circuits: IPD –
Memories – PMIC - SoC• RF: FEM - Duplexer• Systems: Automotive - Consumer
- Energy - Telecom
ANNUAL SUBSCRIPTIONS
Return order by: FAX: +33 2 53 55 10 59MAIL: SYSTEM PLUS CONSULTING
22, bd Benoni GoullinNantes Biotech44200 Nantes – France
EMAIL: [email protected]
*For price in dollars please use the day’s exchange rate *All reports are delivered electronically in pdf format*For French customer, add 20 % for VAT*Our prices are subject to change. Please check our new releases and price changes on www.systemplus.fr. The present document is valid 6 months after its publishing date: September2019
1.INTRODUCTIONThe present terms and conditions apply to the offers, sales and deliveries of services managed by System PlusConsulting except in the case of a particular written agreement.Buyer must note that placing an order means an agreement without any restriction with these terms and conditions.
2.PRICESPrices of the purchased services are those which are in force on the date the order is placed. Prices are in Euros andworked out without taxes. Consequently, the taxes and possible added costs agreed when the order is placed will becharged on these initial prices.System Plus Consulting may change its prices whenever the company thinks it necessary. However, the companycommits itself in invoicing at the prices in force on the date the order is placed.
3.REBATES and DISCOUNTSThe quoted prices already include the rebates and discounts that System Plus Consulting could have granted accordingto the number of orders placed by the Buyer, or other specific conditions. No discount is granted in case of earlypayment.
4.TERMS OF PAYMENTSystem Plus Consulting delivered services are to be paid within 30 days end of month by bank transfer except in thecase of a particular written agreement.If the payment does not reach System Plus Consulting on the deadline, the Buyer has to pay System Plus Consulting apenalty for late payment the amount of which is three times the legal interest rate. The legal interest rate is thecurrent one on the delivery date. This penalty is worked out on the unpaid invoice amount, starting from the invoicedeadline. This penalty is sent without previous notice.When payment terms are over 30 days end of month, the Buyer has to pay a deposit which amount is 10% of the
total invoice amount when placing his order.
5. OWNERSHIPSystem Plus Consulting remains sole owner of the delivered services until total payment of the invoice.
6.DELIVERIESThe delivery schedule on the purchase order is given for information only and cannot be strictly guaranteed.Consequently any reasonable delay in the delivery of services will not allow the buyer to claim for damages or tocancel the order.
7.ENTRUSTED GOODS SHIPMENTThe transport costs and risks are fully born by the Buyer. Should the customer wish to ensure the goods against lost ordamage on the base of their real value, he must imperatively point it out to System Plus Consulting when theshipment takes place. Without any specific requirement, insurance terms for the return of goods will be the carriercurrent ones (reimbursement based on good weight instead of the real value).
8.FORCE MAJEURESystem Plus Consulting responsibility will not be involved in non execution or late delivery of one of its dutiesdescribed in the current terms and conditions if these are the result of a force majeure case. Therefore, the forcemajeure includes all external event unpredictable and irresistible as defined by the article 1148 of the French CodeCivil?
9.CONFIDENTIALITYAs a rule, all information handed by customers to system Plus Consulting are considered as strictly confidential.A non-disclosure agreement can be signed on demand.
10.RESPONSABILITY LIMITATIONThe Buyer is responsible for the use and interpretations he makes of the reports delivered by System Plus Consulting.Consequently, System Plus Consulting responsibility can in no case be called into question for any direct or indirectdamage, financial or otherwise, that may result from the use of the results of our analysis or results obtained usingone of our costing tools.
11.APPLICABLE LAWAny dispute that may arise about the interpretation or execution of the current terms and conditions shall be resolvedapplying the French law.It the dispute cannot be settled out-of-court, the competent Court will be the Tribunal de Commerce de Nantes.
TERMS AND CONDITIONS OF SALES
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 29
COMPANYSERVICES
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 30
Overview / Introduction
Teardown Analysis
Cost Analysis
Selling Price Analysis
Feedbacks
About System Pluso Company serviceso Contacto Legal
Business Models Fields of Expertise
Custom Analyses(>130 analyses per year)
Reports(>40 reports per year)
Costing Tools
Trainings
©2019 by System Plus Consulting | Particle Sensors Comparison 2019 31
Overview / Introduction
Teardown Analysis
Cost Analysis
Selling Price Analysis
Feedbacks
About System Pluso Company serviceso Contacto Legal
Contact
Europe Sales OfficeLizzie LEVENEZFrankfurt am MainGERMANY+49 151 23 54 41 [email protected]
www.systemplus.fr
Asia Sales OfficeTakashi [email protected]
Mavis WANGGREATER [email protected]
NANTESHeadquarter
FRANKFURT/MAINEurope Sales Office
LYONYOLE HQ
TOKYOYOLE KK
GREATER CHINAYOLE
PHOENIXYOLE Inc.
America Sales OfficeSteve LAFERRIEREEastern [email protected]
Troy BLANCHETTEWestern [email protected]
KOREAYOLE
Headquarters22 Boulevard Benoni Goullin44200 NantesFRANCE+33 2 40 18 09 [email protected]