omt tool Installation
-
Upload
reese-morse -
Category
Documents
-
view
38 -
download
1
description
Transcript of omt tool Installation
OMT TOOL INSTALLATION
INSTALLATION/REGISTRATION
Part I: Download Tool Using WebPart II: Download Tool Using CD PartIII: Installation for Windows
PART I: DOWNLOAD TOOL USING WEB
This tool needs to be installed on your terminal before you start the registration process.
The tool can be downloaded from the web or can be installed through a CD.
This section explains the process of installation using a web interface.
The precise steps and screen-shots for installation are provided
hereafter
NOTE: While using data card, the LAN card should be enable for the MAC address.
1. LOGIN USING CSC ID AND PASSWORD
Using the Internet you need to access the CSC online monitoring website and authenticate yourself, for authentication your SCA will provide your CSC ID and password. .
2. YOUR CSC REGISTRATION STATUS
Once CSC user logs in using his/her CSC-ID and password the CSC Registration Status gets displayed as shown below:
Various Status messages that can appear on the screen are indicated in the table below:
STATUS REASON
Commissioned A CSC has been commissioned with an CSC-ID and password but has not installed the tool on any IT terminals.
Registered (Partial)
A CSC has been commissioned with an CSC-ID and password and has installed the tool on some or few of its IT terminals.
Re-Register A CSC has been Registered, but it needs to Re-register installer on its IT terminal.
3. CHOOSE APPROPRIATE DOWNLOAD OPTION
Once you are successfully logged in, your Registration status will appear on the screen, the system will prompt you to download the installer in either of the Operating Systems (Windows/Linux).
5. Run the Download Client
Proceed for Installation hereafter depending on your choice of Operating System.
For Install Process Windows click here III: Installation for Windows OS
PART II: DOWNLOAD TOOL USING CD
This tool needs to be installed on your terminal before you start the registration process.
The tool can be downloaded from the Web or can be installed through a CD.
This section explains the process of installation using an installer CD. Using the CD is preferable if the bandwidth speed is low.
The precise process for installation is provided hereafter
For Windows click here III : Installation for Windows OS
PART III : INSTALLATION PROCESS WINDOWS
This tool needs to be installed on your terminal before you start the registration process. The tool can be downloaded from the Web or can be installed through a CD. This section explains the process of installation using Windows OS. The precise steps and screen-shots for installation are provided hereafter.
1.Install CSC Setup
Once the client has been successfully saved on your computer or once the CD has been inserted on your machine, a self installer pop-up would prompt you to click 'Next' to complete the installation process. Further keep clicking 'Next'/'OK'/ 'Install'/'Yes' whenever prompted.
2.PROCEED FOR CSC CLIENT REGISTRATION
After successful installation process the system will automatically take you to a registration process! Click here to proceed to Registration
PART IV: REGISTRATION PROCESS
To complete registration execute the following steps.
1. Fill in your CSC ID and Password
On the CSC Registration screen provide your valid CSC Login-ID and Password to register
2.Wait Until ConfirmationWait until registration process is under progress.
3.Registration CompleteOnce you have registration your system will restart.
4.Restart your ComputerOnce the system restarts login to the online monitoring tool. The Registration Status would now show 'Registered'.
PART V: RE-INSTALLATION PROCESS
Re-Installation process is meant to down load the installer once again on the machine on which you have successfully installed the Tool. These exceptional
events are: CSC terminal is reformatted CSC terminal suffers from a virus attack CSC hard drive is reformatted Any critical component is replaced causing change of MAC address of a
terminal A newer version of this tool is published
Once a CSC is set to Re-Registration mode the system is ready for Re-Installation