NOW New range… IN Bijur Delimon STOCK … Products 2018...lubricating cutting tools during various...
Transcript of NOW New range… IN Bijur Delimon STOCK … Products 2018...lubricating cutting tools during various...
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
New range… Bijur DelimonLubrication Equipment
• Pumps• Distribution
elements• Controllers• Monitoring• Accessories
Minimise downtime and maximise production with Bijur Delimon’s range of highly reliable lubrication products and components.
Deliver the right quantity of lubricant to the right place at the right time, while the machine is in operation.
NOW NOW NOW NOW NOW NOW NOW NOW NOW IN IN IN IN IN IN
STOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCKSTOCK
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
The G Lubricator is a sealed piston pump that can be fed from an independent oil reservoir. In normal operation, oil is gravity fed from the reservoir to the pump. The unit may be operated by an eccentric cam or a reciprocating part of the machinery being lubricated, with no electric or alternative power required. The G Lubricator is ideal for small gearbox and pinion applications, using the gearbox oil as the supply.
Tech Sheet 68041
G Lubricator, Sealed Piston Pump
0502
21346 662.85
The L18P Lubricator is a reliable, cost effective manual pump for machine tool applications. A low pressure system for use with SLR proportioning valves for sliders, bearings and bushes, and is suitable for up to 73 lubrication points.
Lubrication Inlet Filter: 40 micron particle separation.
Maximum Working Pressure:5 bar
Tech Sheet 68044
L18P Manual Pump
0502
L18P 1 Litre 119.30
Tech Sheet 68046
L2P Lubricator, Manual One Shot
0502
C2988C 0.2 Litre 67.45
The L2P Lubricator is a low pressure, manually operated, spring return piston pump. Used with SLR proportioning valves in single line systems, and suitable for up to 10 lubrication points.Lubrication Inlet Filter: 40 micron particle separation.
Lubrication Pumps
DA Lubricators are manual grease and oil, double-action piston, high pressure pumps for bearings that require an application of lubricant infrequently. A manually-operated pumping unit is used, and may be located on the machine or at any convenient point nearby. Widely used in steel plants, mines and heavy industrial applications.Internal Filter: standard on all models.Pressure Gauge: standard on all models.Level Indicator: standard on all models.
DA Grease Lubricators, Dual Line
0502
DA5101AC 4kg 1550.55DA6101AC 6kg 775.05
DA Grease Lubricator, Single Line
0502
DA5120AC 4kg 760.65
Tech Sheet 68037
Working Temperature:-20°C to +80°C Maximum Working
Pressure:25 bar
Working Temperature:-20°C to +20°C
Working Temperature:-20°C to +80°C
Maximum Working Pressure:21 bar
Working Temperature:-20°C to +80°C
Working Pressure:6 to 12 bar
For lubrication at friction points on presses, stamping presses, machine tools, conveyors, etc.• Multi-line pump• Hand lever actuation• Output volume max. 0.5 cm3/stroke• Discharge pressure max. 25 bar• Lubricant: grease
Working Temperature:-20°C to +80°C
Tech Sheet 68141
TBD Hand Pumps
0503
TBH04A01OA00 0.25 Litre 705.25TBH05A01OB00 0.65 Litre 796.75TBH08A01OA00 0.25 Litre 705.25TBH08A01OB00 0.65 Litre 796.75
The lubrication pump type VB-B are reservoir pumps with a single-action plunger operated by a hand lever. The lubricant reservoir has a capacity of 1, 1.6 or 4 litre. Pump of type VB-B are intended for grease and semifl uid grease. Type VB-B grease lubrication pumps have an anti-cavitation plate with a level indicator projecting through the reservoir cover.When the hand lever is in the pressure release position, the delivery outlet is connected to the pumps suction compartment. The pump can be used as a fi lling pump, or it can be used for single-line, dual-line or progressive systems. When used for dual-line systems, a 4/2-way valve available as an accessory, must be screwed into the delivery connection. In systems, which do not require de-pressurisation (progressive systems, fi lling and greasing systems), de-pressurisation can be prevented by installing a non-return valve in the main delivery line.• With follower piston and optical contents indication• Discharge pressure max.: 120 bar• Lubricant: grease, liquid grease
Working Temperature:-20°C to +70°C
Tech Sheet 68142
VB-B Hand Pumps
0503
VBB01A01OA00 1 Litre 705.25VBB01A01OB00 4 Litre 2063.85VBB01A01OB01 4 Litre 2709.30VBB01A01OC00 1.6 Litre 2024.35
Maximum Working Pressure:120 bar
Refer to tech sheet for output variations
GREASING & LUBRICATION EQUIPMENT
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
Lubrication PumpsThe Airmatic Lubricator is a simple economic unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is easily adjusted to suit a wide variety of industrial centralised lubrication needs. The unit is for use with cyclic oil lubrication systems, and can be used with single line resistance (SLR), positive displacement injector (PDI), and progressive distribution and injector systems.
Working Temperature:5°C to +50°C
Airmatic Lubricators
0502
AIR1AAA 1 Litre SLR 552.25AIR1BBH 1 Litre PDI 875.45AIR4ABA 4 Litre SLR 844.25AIR4BBB 4 Litre PDI 1143.00AIR12BBA 12 Litre PDI 1643.70
Tech Sheet 68033
The MPA Micro Pump is a pneumatically operated miniature piston pump used to deliver lubricant in small, metered quantities. This pump has applications in lubricating cutting tools during various machining operations including drilling, reaming and broaching.
Working Temperature:0°C to +80°C
Tech Sheet 68048
MPA Micro Pump, Single Injector
0502
5107811E 132.70
MPA Micro Pump, 3 Way Injector, Group Actuation
0502
5107831E 185.85
MPA Micro Pump, 3 Way Injector, Individual Actuation
0502
5107832E 190.55
The PulseFire Lubricator is a hydraulically operated, spring return piston pump. It is operated from the hydraulics of the host machine and is typically plumbed into the line of a hydraulic actuator which is regularly operated on the machine.Multiple Outlets: 1-8.
Working Pressure:60 to 200 bar
PulseFire Lubricator
0502
70000 1/8” M8 x 1 309.15
The TB-D Pneumatic Pump supports lubrication at friction points for applications such as presses, stamping presses, machine tools and conveyors. The TB-D Pneumatic Pump is suitable for progressive and single line injector systems.Discharge Pressure: 100 bar (max).Air Pressure: 2 to 6.5 bar.
Working Temperature:-20°C to +80°C
Tech Sheet 68049
TB-D Pneumatic Pumps, 0.5cm3 Output, BSPP
0503
TBP01A01OA00 1.6 Litre 1277.50TBP01A01OB00 4 Litre 1334.00
TB-D Pneumatic Pumps, 4.5cm3 Output
0503
TBP10A01OA00 1.6 Litre 1277.50TBP10A01OB00 4 Litre 1334.00
The Spray Mist Lubricator Unit is perfectly adapted for use with different liquids, for applications such as metal cutting, drilling, grinding, cooling or wetting processes and chain lubrication. It comprises a fi lter with drain, a pressure regulator, an electric solenoid valve, which can be synchronised to the machine or equipment being operated, and a pressurised reservoir with an integrated fi lter. Separate lines carry air and liquid to jet assemblies.
Working Pressure:1 to 3 bar
Tech Sheet 68052
Mist Lubricator, BSPP
0502
UBABB 1/4” 1/4” 4 Litre 24V DC 1606.00
Maximum Working Pressure:150 bar
Working Temperature:0°C to +80°C
Working Pressure:100 bar
Maximum Working Pressure:6.5 bar
GREASING & LUBRICATION EQUIPMENT
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
TM-1 Lubricators are a cost effective and economical electric oil pump for use with up to 20 lubrication points from one pump. Ideally suited for SLR systems.Discharge Pressure: 1.5 bar to 3.5 bar.Lubrication Inlet Filter: 40 micron particle separation.
Tech Sheet 68047
TM-1 Lubricator Pumps with Level Switch
0502
C2895 115/230V AC 0.57 Litre 404.65D3094 115/230V AC 1 Litre 435.60
TM-1 Lubricator Pumps without Level Switch
0502
C2798 115/230V AC 0.57 Litre 393.40D3109 115V AC 1 Litre 408.30
Tech Sheet 68045
TM-5 Lubricator Pumps with Level Switch
0502
CycleTime
D2986 5/16-24 1 Litre 6.4 Minutes 538.25D2992 5/16-24 1 Litre 128 Minutes 570.75
TM-5 Lubricator Pumps without Level Switch
0502
CycleTime
D2994 1 Litre 6.4 Minutes 528.20D3189 1 Litre 64 Minutes 521.50
The TM-5 Lubricator Pump is a motor-driven piston pump, spring discharge type. It is extensively used in machine tool applications such as lathes, drilling machines, presses, etc. TM-5 Lubricators are a cost effective and economical electric oil pump for use with up to 50 lubrication points from one pump.Discharge Pressure: 4.1 bar (max).Lubrication Inlet Filter: 40 micron particle separation.Power: 115/230 V AC.
Lubrication PumpsThe SureFire II Pump is an automatic, robust and durable electric motor-driven gear pump. Its compact size is designed to fi t your space requirements and lubrication demands, and can adapt to a broad range of production machinery.SLR version handles oil.
Working Temperature:+5°C to +40°C
Maximum Working Pressure:31 bar
Tech Sheet 68051
SureFire II Pump, SLR, BSPP
0502
SFX2PASNNNAXB 2 Litre 24V DC 1111.90
SureFire ll Pumps, PDI, BSPP
0502
SFX2PBSNNNCXC 2 Litre 100/115V AC 1491.90SFX3PBSNNNAXD 3 Litre 200/230V AC 1039.70
PDI version handles oil and fl uid greases.
Tech Sheet 68051
The EC-L Lubricator is a multipurpose all electrical oiler system, which is capable of depositing a measured volume of oil from each nozzle (in solid drop form) directly onto a moving part such as the link pin of a roller chain.
Working Temperature:-25°C to +70°C
Tech Sheet 68140
EC-L Lubricator
0503
1000380 1/4” 2033.35
Maximum Working Pressure:25 bar
Maximum Working Pressure:3 bar
Working Temperature:+5°C to +20°C
Working Temperature:+5°C to +40°C
Maximum Working Pressure:31 bar
Working Temperature:-5°C to +20°C
Maximum Working Pressure:3 bar
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
The Multiport Lubricator is a compact, rugged, low maintenance, motor-driven electric lubricator with high pressure capabilities, equipped with fi xed or adjustable output pumping elements to discharge grease or oil over a wide operating range. Low level switches are optional on this compact unit.
Working Temperature:-18°C to +50°C
Maximum Working Pressure:Grease: 240 barOil: 180 bar
Tech Sheet 68050
Multiport Lubricators
0502
MULTI2AA 2 Litre 12V DC 390.20MULTI4BB 4 Litre 24V DC 646.00MULTI4BE 4 Litre 220-380V AC 831.25MULTI8BB 8 Litre 24V DC 801.95MULTI8BD 8 Litre 220V AC 977.10
Lubrication Pumps
The Dynamis Pump has been developed and designed as a multifunction pump for centralised lubrication systems. Due to its compact construction and implementation of the modular system, this pump can be used not only for wind turbines but also in industry, commercial vehicle lubrication and spray lubrication applications such as gears and pinions.
Working Temperature:-40°C to +75°C
Maximum Working Pressure:160 bar
Tech Sheet 68053
Dynamis Lubricator Pumps
0502
DYNMLA11AD20404 2 Litre 24V DC 1445.95DYNMLA11AH10807 4 Litre 12V DC 1465.85DYNMLA11AH20404 4 Litre 24V DC 1504.85DYNMLA11AH40807 4 Litre 230V AC 1601.75
Dynamis Maxx Lubricators are electrically driven piston pumps designed for use with series progressive dividers, single line injectors and multi-line confi guration. Dynamis Maxx Lubricators are ideally suited for on-road and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in conditions found in the construction, mining and forestry industries.
Working Temperature:-30°C to +75°C
Tech Sheet 68038
Dynamis Maxx Lubricators with Follower Plate
0502
DYXMLA200F21900 4 Litre 24V DC 1793.85DYXMLA333G40407 8 Litre 230V AC 2762.30DYXMLA220I40407 15 Litre 230V AC 2803.10
Dynamis Maxx Lubricator without Follower Plate
0502
DYXMLA200P21208 4 Litre 24V DC 1596.30
The Mul-T-Shot Pump is an air operated pump with multiple lube outlets to serve more than one lubrication point. Designed as an economical means of providing lubricant to several points. Once the number of lube points has been determined, simple modifi cation to the lube piston stop dictates the number of active lube delivery points. Equal and measured amounts of lubricants are dispensed from each outlet independent of outlet back pressure.Features & Benefi ts• Multiple pump outlets. Can handle 1 to 12 lube points through simple
pump modifi cation.• Outlets are independent of each other, a broken lube line will not affect the
other lubrication points being supplied.• Equal quantity of lubricant is supplied to each point, regardless of outlet
back pressure.• Can be used with oil.• Independent lube outlet ports allows for different lubricant pressures to
be developed.
Tech Sheet 68139
Mul-T-Shot
0503
Ratio
1000192 M8 x 1 M12 x 1 25:1 619.95
Working Temperature:-5°C to +45°C
Air Pressure:6 bar
Maximum Working Pressure:300 bar
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
The FZ-A Lubricator is primarily designed for direct feed applications, for servicing up to 12 lubrication points. These unique lubricators are supplied with pump bodies comprising either a single row of outlets (1-6) or a double row of outlets (1-12). Discharge is adjustable, from 100% to 25% for each outlet or set of outlets via adjusting spindles at the top of the pump body.
Working Temperature:-20°C to +80°C
Tech Sheet 68039
FZ-A Lubricator, BSPP
0503
Drive
FZA01A01OA00 8 Litre Shaft 1 1488.70FZA12A01OD00 2.5 Litre Shaft 12 1867.05FZA04A12AA00 8 Litre Motor 4 2222.20FZA01A12AA03 8 Litre Motor 1 2977.40FZA02A11EA03 8 Litre Motor 2 2573.00
Tech Sheet 68040
FZ-B Lubricator, BSPP
0503
Drive
FZB01A02OA00 8 Litre Shaft 2023.60FZB01A10AC01 30 Litre Motor 2980.30FZB01A12AA03 8 Litre Motor 3251.40
Working Temperature:-20°C to +80°C
FZ-B Lubricators are typically driven by a fl anged, geared motor or via the machine being lubricated through either a ratchet or rotary drive. Maximum permissible speed of the piston plunger is 10 rpm for the rotary drive lubricators and 6 rpm for the ratchet drive. A wide range of transmission ratios are available, making this lubricator adaptable to meet a diversity of machine requirements.
Lubrication Pumps
The ZP-6000 Pumps are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as a delivery pump for lubricant in progressive systems.Pipe Connection for Feed Line: M14 x 1.5
Working Temperature:-30°C to +60°C
Maximum Working Pressure:160 bar
Tech Sheet 68042
ZP-6000 Pump
0503
ZP616B04LC00 30 Litre 16 3794.05ZP632B01RC00 30 Litre 16 + 16 5030.95
ZP-6000 Pumps with Ultrasonic Level Switch
0503
ZP616B02LB01 20 Litre 16 4435.00ZP61RB01RC01 30 Litre 16 4354.00
Where electrical power is available, the BM-B Pump is ideally suited at the heart of a lubrication system. These pumps are robust for harsh and severe applications, and their compact construction of high-grade steel gives them a long service life. A pressure relief valve is incorporated in to the BM-B Pump. This can be adjusted to control the operating pressure to the centralised lubricating system and protect the pump against excessive back pressures.
BM-B Lubricator
0503
BMB01A01OA00 8 Litre 0.18 3758.70
BM-B Lubricators with Level Switch
0503
BMB01A01OA01 8 Litre 0.18 4413.95BMB01A04OB01 15 Litre 0.37 4857.50
BM-B Lubricator with Level Switch & Pressure Gauge
0503
BMB01A03OB03 15 Litre 0.37 5022.75
The BS-B Lubricator is primarily used in dual line lubrication systems, where there are a high number of lubrication points, often in highly challenging and extreme operating environments such as steel mills and power stations. The BS-B is highly reliable and can be supplied complete with a geared motor.
Working Temperature:-20°C to +80°C
Maximum Working Pressure:400 bar
BS-B Lubricator
0503
BSB01A01OA00 60 Litre 0.75 7315.95
BS-B Lubricator with Pressure Gauge
0503
BSB01A03OA02 60 Litre 1.5 8158.20
BS-B Lubricators with Level Switch & Pressure Gauge
0503
BSB01A02OB03 100 Litre 0.75 8298.80BSB01A04OB03 100 Litre 1.5 9142.45
Tech Sheet 68035
Tech Sheet 68036
Working Temperature:-20°C to +75°C
Maximum Working Pressure:400 bar
Maximum Working Pressure:400 bar
Maximum Working Pressure:200 bar
Please refer to tech sheet for fl ow rates and voltage options
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Distribution ElementsMeter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system dispenses known amounts of oil to the distribution network and meter units deliver this oil in varying amounts to the bearing points.
Tech Sheet 68147
FJB Meter Units, UNF
0502
B2494 5/16” 5/16” 13.95B2495 5/16” 5/16” 14.25B2496 5/16” 5/16” 11.75B2497 5/16” 5/16” 14.90B2498 5/16” 5/16” 14.65B2499 5/16” 5/16” 16.10B2500 5/16” 5/16” 16.05B6548 5/16” 5/16” 14.25
ASA Meter Units, BSPT
0502
17841-0 M8 x 1 1/8” 18.2517841-00 M8 x 1 1/8” 18.4517841-1 M8 x 1 1/8” 18.4017841-2 M8 x 1 1/8” 18.8517841-3 M8 x 1 1/8” 18.6017841-3/0 M8 x 1 1/8” 20.4517841-4 M8 x 1 1/8” 20.0517841-5 M8 x 1 1/8” 20.05
FTG Meter Units, UNF
0502
B2759 5/16” 5/32” 19.95B2760 5/16” 5/32” 19.75B2761 5/16” 5/32” 19.50B2762 5/16” 5/32” 20.45B2763 5/16” 5/32” 19.55B2765 5/16” 5/32” 20.40B6553 5/16” 5/32” 20.90
FKA Meter Units, NPT
0502
B3913 1/8” 16.90B3914 1/8” 15.20B3915 1/8” 15.70B3916 1/8” 16.50B3917 1/8” 12.00B3918 1/8” 18.60B3919 1/8” 18.55B7271 1/8” 25.50
The ZE-E Injector is designed for single line centralised lubrication systems, and primarily for moving targets such as chain links and conveyors.
Working Temperature:-20°C to +80°C
Working Pressure:10 to 30 bar
Tech Sheet 68031
ZE-E Injectors
0502
ZEE01A 10 27.50ZEE03A 25 24.95ZEE05A 50 24.95ZEE10A 100 25.90ZEE20A 200 25.90
The ZE-G Injector delivers a fi xed quantity of lubricant at the outlet connection during each discharge cycle. These are available in six discharge rates.
Tech Sheet 68028
ZE-G Injector, Metric
0502
ZEG03A 25 42.70ZEG05A 50 44.50ZEG10A 100 44.50ZEG20A 200 47.30
Working Temperature:-20°C to +80°C
Working Pressure:10 to 30 bar
Flat Spray Nozzle, Straight, without MonitoringThe SDU Spray Nozzle is designed for spraying lubricant onto sliding or moving surfaces. Available in round or fl at spray pattern. Valve heating is required to give improved operation, dependent on viscosity.
With Heating & Fastening Clamp, BSPP
0503
SDU 01 A 00 H 01 1/4” 1569.75
Without Heating with Fastening Clamp, BSPP
0503
SDU 01 A 00 O 01 1/4” 192.80
Tech Sheet 68054
Without Heating or Fastening Clamp, BSPP
0503
SDU 03 A 01 O 00 1/4” 444.45
With Heating & Fastening Clamp
0503
SDU 01 A 03 H 01 1/4” 845.15
• Thread M10 x 1 • Thread M10 x 1
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Distribution Elements
FL-32 / 33 Injectors are perfectly adapted to lubricate all types of machines with a cyclic sequence. Discharge of each injector is adjustable yet delivers a precise amount of lubricant.
Maximum Working Temperature:+176°C
Working Pressure:82 to 238 bar
Tech Sheet 68026
FL Replacement Injectors for Grease, NPT
0502
27163-R 1/8” 61.7027164-RSS 1/4” 122.95
FL-42 / 43 Injectors are perfectly adapted to lubricate all types of machines with a cyclic sequence. Discharge of each injector is adjustable yet delivers a precise amount of lubricant.
Tech Sheet 68027
FL Injectors for Oil, NPT
0502
27166 1/8” 122.1527165 1/4” 85.90
The ZEM series metering elements are positive displacement injectors (PDI) that deliver fi xed quantities of lubricant to the attached friction point. Other confi gurations are available on request.
Working Pressure:15 to 45 bar
Tech Sheet 68029
ZEM Injector
0505
ZEM393PHIH M12 x 1 4 21.20
Maximum Working Temperature:+176°C
Working Pressure:82 to 238 bar
The PVB Distributor accurately meters and dispenses lubricant to as many as 20 outlet lines, at operating pressures up to 300 bar. It is a progressive distributor of solid block design for use with oil or grease applications. PVB Distributors are available in sizes ranging from 6 to 20 outlets.
Working Temperature:-20°C to +120°C
Maximum Working Pressure:With indicator pin: 160 barWithout indicator pin: 300 bar
Tech Sheet 68024
PVB Distributor, BSPP x Metric
0502
PVB06A01AAA02 6 155.25PVB08A01AAAA02 8 155.25PVB14A02AAAAAA03 14 226.45
U-Block Divider valves are especially designed for use in progressive lubrication systems. Several outlet confi gurations are available to allow you to tailor the divider valve to your specifi cations.
Working Temperature:-10°C to +70°C
Maximum Working Pressure:Oil: 60 barGrease: 150 bar
Tech Sheet 68025
U-Block Divider Valves, BSPP
0502
U4R 4 82.70U6R 6 89.30U8R 8 95.90U12R 12 109.15
Working Temperature:-10°C to +70°C
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Distribution ElementsDDM Valves are completely hydraulic in operation and will deliver either oil or grease. These dual line modular valves are also fully and individually adjustable in regard to discharge quantity.• Has only two moving parts• No springs or check valves
Working Temperature:-20°C to +80°C
Maximum Working Pressure:350 bar
Tech Sheet 68020
DDM Modular Valves
0503
Metered Volume
cm³
DDM01A2100 0.1-1 96.85DDM05A2500 0.5-5 111.35DDM15A1500 3-15 225.15
The SDM Modular Valves are the essence of dual line lubrication systems. They are mounted close to the lubrication points and hydraulically operated by pressure from the fi rst and then the second of the two supply lines. Each module can be individually adjusted to suit the bearing requirements.
SDM Modular Valves
0503
Metered Volume
cm³
SDM02A2100 0.2-2 95.25SDM05A2500 1-10 105.45SDM15A1500 6-30 217.20
Adaptors can be permanently fi xed to the lubrication system pipework before valves are fi tted, reducing the possibility of contamination during the installation period. O-ring recesses are fi tted into the top of the adaptor so that the fi tter can observe the condition of the O-rings when fi tting the module.
Tech Sheet 68021
MA1 Manifold Adaptors, to suit DDM 1
0503
17610 2 48.6017620 4 60.5517630 6 71.7517640 8 76.85
MA5 Manifold Adaptors, to suit DDM5
0503
17710 2 56.4517720 4 59.4517730 6 83.8517740 8 108.50
MA15 Manifold Adaptors, to suit MA15
0503
17850 2 99.3017860 4 153.3517870 1 153.70
The ZV-B Distributor is used in dual line systems with a large number of lubrication points and long distances, typically in the steel, mining, paper and power industries.
Working Pressure:10 to 400 bar
Tech Sheet 68057
ZV-B Dual Line Distributors
0503
Metered Volume
cm³
ZVB06A302200 3.0 6 347.15ZVB08A300100 3.0 8 419.60ZVB02A153300 1.5 2 211.40ZVB04A153400 1.5 4 301.20ZVB06A153500 1.5 6 397.60ZVB08A153200 1.5 8 516.20
The ZV-C Distributor is used in dual line systems that usually have a large number of lubrication points and long distances, typically found in the steel, mining, paper and power industries. It is available with 1 to 4 outlets, is zinc nickel plated for extra corrosion protection, and is 1,000 hours salt water proof tested.
ZV-C Distributors
0503
Metered Volume
cm³
ZVC02A15 15 2 805.95ZVC03A15 15 3 1211.85ZVC04A15 15 4 1242.20
DM Valves are completely hydraulic in operation and will deliver either oil or grease. These dual line valves are also fully and individually adjustable in regard to discharge quantity.• Has only two moving parts• No springs or check valves
Working Temperature:-20°C to +90°C
Maximum Working Pressure:350 bar
Tech Sheet 68023
DM Modular Valves, BSPP
0503
Metered Volume
cm³
DMM31A0100 0.2-1.2 1 172.00DMM32A0100 0.2-1.2 2 219.00DMM33A0100 0.2-1.2 3 311.60DMM34A0100 0.2-1.2 4 333.80DMM41A0100 0.6-2.25 1 142.30DMM42A0100 0.6-2.25 2 216.80DMM52A0100 1.5-5.1 2 252.65DMM62A0100 3.0-14.25 2 376.65DMM01A0100 6.0-25.5 1 335.30
Working Temperature:-20°C to +80°C
Maximum Working Pressure:350 bar
Tech Sheet 68020
Maximum Working Pressure:350 bar
Working Temperature:-20°C to +80°C
Working Pressure:10 to 400 bar
Tech Sheet 68022
Working Temperature:-20°C to +120°C
See below for manifolds
See below for manifolds
See tech sheet for thread sizes
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Manifolds
Aluminium Junction, Metric
0502
22653 M10 x 1 M8 x 1 2 2 3.2022654 M10 x 1 M8 x 1 2 3 3.5522655 M10 x 1 M8 x 1 4 2 4.3522656 M10 x 1 M8 x 1 5 2 5.0522657 M10 x 1 M8 x 1 6 2 5.4022658 M10 x 1 M8 x 1 7 2 6.3022659 M10 x 1 M8 x 1 8 2 12.35
Aluminium Junction Bar, Metric
0502
AJ138 M10 x 1 M10 x 1 1 1 6.55AJ139 M10 x 1 M10 x 1 1 1 7.90AJ140 M10 x 1 M10 x 1 1 1 9.10AJ141 M10 x 1 M10 x 1 1 1 11.80AJ142 M10 x 1 M10 x 1 1 1 12.40AJ144 M10 x 1 M10 x 1 1 1 14.90
Tech Sheet 68143
Junction Bars, NPT
0502
B3262 1/8” 1/8” 2 2 3.00
Junction Bar Single Sided, UNF
0502
B3263 5/16” 5/16” 3 2 3.35B3264 5/16” 5/16” 4 2 3.70B3265 5/16” 5/16” 6 2 4.95B4508 5/16” 5/16” 7 2 6.15B3704 5/16” 5/16” 8 2 6.85B3471 5/16” 5/16” 10 2 7.80
Tech Sheet 68144
Junction Bars Single Sided, Metric
0502
20348-10 M8 x 1 M8 x 1 8 2 5.3020348-4 M8 x 1 M8 x 1 2 2 2.7520348-5 M8 x 1 M8 x 1 3 2 2.9020348-6 M8 x 1 M8 x 1 4 2 3.1520348-7 M8 x 1 M8 x 1 5 2 3.80
Tech Sheet 68146
Junction Bar Double Sided, UNF
0502
B3109 5/16” 5/16” 6 2 3.15B3254 5/16” 5/16” 8 2 5.65
Manifolds are for use with Distribution Elements found on page 7. Please refer to tech sheets for more information.
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Controllers & MonitoringThe SA-K Changeover Valve is for dual line and single line central lubrication systems. The design of the 4/2 way valve ensures a permanent exchange of the lubricant in all channels of the appliance. The permanent exchange is to avoid operating troubles resulting from ageing and hardening of the lubricant, which are due to oil separation from the grease and the resulting soap concentration.
Tech Sheet 68019
SA-K Changeover Valve
0503
SAK25A0000 250 993.05SAK35A0000 350 1029.05
SA-K Changeover Valve with Limit Switch
0503
SAK25A0100 3/8” 250 1077.05SAK35A0100 3/8” 350 1113.05
SA-K Changeover Valve with Two Monitoring Switches
0503
SAK25A0200 3/8” 250 1413.10
The DR-4 is a 4 port, 2 position hydraulically operated directional control valve for use with dual line systems (electric and pneumatic). Available with micro switch or proximity switch monitoring.
Working Temperature:-20°C to +100°C
Working Pressure:40 to 350 bar
Tech Sheet 68013
DR-4 Way Dual Line System Valve with Switch
0503
33601 3/8” 896.90
DR-4 Way Dual Line Non-return System Valve, without Switch
0503
33602 3/8” 924.50
The SG-A Switching Device is used as a differential pressure switch in dual line centralised lubrication systems. When the differential pressure is 50 bar, and/or 100 bar, it releases a pulse for the actuation of the directional control valve or for the monitoring of the system.
Tech Sheet 68017
SG-A Switching Devices
0503
SGA05A00 50 613.15SGA10A00 100 655.20
Supplied in a steel cover.Excludes outlet fi ttings.
• Thread size 3/8”
• Thread size 3/8”
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Controllers & MonitoringThe DS405 iPM Lubrication Monitor has 24 confi gurable channels with real-time logging, storage fl ow monitoring at the bearing, and data capture of automatic oil and grease systems. It is typically used across heavy and light industries. Includes external USB for downloading data.Mains Input Power Supply Range: 85-265V AC, 50/60 Hz universal input 0.85a, protection 2 ampControl Voltage Power Supply: 24V DC, protection 2 amp
Tech Sheet 68008
DS405 iPM Lubrication Monitor, Standard Unit
0503
95408 1632.55
DS405 iPM Lubrication Monitor, Bluetooth Unit
0503
95409 1692.65
The 55105 Lube Point Monitor is designed for mounting at or near the lubrication point inlet. The monitoring of the 55105 can be achieved via any PLC. The feedback will ensure that the lubricant has reached the inlet of critical lubrication points.
Working Temperature:-20°C to 70°C
Maximum Working Pressure:700 bar
Tech Sheet 68009
Lube Point Monitor, BSPP
0503
55105-B 462.15
The SC400 Lubrication Controller offers multi-system functionality. Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fi ll system.The SC400 operates in any fi ve system modes:• Positive displacement injector• Single line injector• CE approved
Tech Sheet 68010
SC400 Controller
0503
98000 1142.85
The SMAC Controller is a multipurpose programmable controller used with industrial lubrication systems. Settings are saved whenever power is interrupted. Up to four operating modes can be selected which allows the controller to be used with various lubrication system designs.
Working Temperature:-20°C to +55°C
Tech Sheet 68011
SMAC Controllers
0503
22361-E1 220V AC 204.4522361-E2 110V AC 198.90
The SMDC Controller is a multipurpose programmable controller used with on-board mobile lubrication systems. The unit is energised by the vehicle or machine’s ignition switch. Controller settings are saved whenever power is interrupted. Up to four operating modes can be selected, which allows the controller to be used with various system designs. A voltage selector switch is located inside the enclosure for both 12 and 24V DC service.
Working Temperature:-20°C to +40°C
Tech Sheet 68012
SMDC Controller
0503
33346E 12V DC or 24V DC 175.40
Working Temperature:-10°C to + 55°C
Oval Type Flow Meter
0503
SR10-7844-D 10 1276.50
Oval Type Flow Meters are a complete fl ow measurement and monitoring system for recirculating oil systems.The method of measurement is based on the rotation of special oval designed gears - the speed of which changes in proportion to the fl ow of oil through the meter. This gives a visual indication of the fl ow rate through the transparent cover and also sends electrical pulse signals to an electronic monitor or PLC to provide actual fl ow meters.This also provides information to allow either low or high fl ow monitoring to be provided.Compatible with DS405 iPM Lubrication Monitor.Working
Temperature:-10°C to 55°C
Maximum Working Temperature:+80°C
Maximum Working Pressure:10 bar
Tech Sheet 68209
Maximum Working Pressure:5075 psi (350 bar)
Maximum Working Pressure:5075 psi (350 bar)
Working Temperature:-10°C to + 55°C
Tel: 0845 456 1222 Fax: 0800 298 7230 Email: sales@fl owtechnologyuk.com www.fl owtechnologyuk.com
GREASING & LUBRICATION EQUIPMENT
Models 205 and the 260 feature clear, polycarbonate reservoir and base allows for visual inspection of the unit’s internal workings. Assembled with medium springs; 3 additional light and heavy springs are included in each box of 10. Extra heavy springs (orange) are available for applications requiring the use of an extension or for high pressure fl ushing applications. Model 260 is individually boxed with 2 additional springs (heavy and light).Specifi cations• Polycarbonate domes
and bases. • Thread size is 1/8” N.P.T. • Operating temperature range:
-10ºF to +250ºF (-23ºC to +121ºC)
Pressure Relief ValvesThe SA-G Pressure Relief Valve is preferably used as a safety valve to protect central lubrication systems from over pressure. Two port pressure and return, suitable for oil or grease.
Tech Sheet 68055
2 Port, Pressure & Return, BSPP
0503
SA-G 40 A 00 3/8” 547.55
Working Temperature:-20°C to 80°C
Working Pressure:0 to 400 bar
BrushesBrush assemblies are suitable for lubricating various moving machine components such as chains, cams, open gears, etc. Oil fl ow to each brush must be controlled by a meter unit or a control unit.
Tech Sheet 68056
Round, NPT Female
0502
50955 1/8” Nylon 6.25
Available with nylon and brass bristles.
Figure 1, Female, NPT
0502
B7488 1/8” Nylon 20 x 4 5.55B7488L 1/8” Brass 20 x 4 38.90AR1473 1/8” Nylon 30 x 4 5.80
Figure 2, Male, NPT
0502
80310 1/8” Nylon 48 x 14 7.3080311 1/8” Nylon 25Ø 6.75
Figure 3, Male, Metric
0502
AR1964 M8 x 1 Nylon 20 x 4 33.40AR1966 M8 x 1 Nylon 30 x 4 39.10
Figure 3, Male, UNF
0502
B7491L 5/16”-24 Brass 20 x 4 27.05B7491 5/16”-24 Nylon 20 x 4 23.00
Figure 3, Male, NPT
0502
B7492 1/8” Nylon 25Ø 19.90AR1531 1/8” Nylon 20 x 4 28.35AR1584 1/8” Nylon 48 x 14 28.45AR1586 1/8” Nylon 30 x 4 33.40
Working Temperature:-30°C to 95°C
Tech Sheet 68056
Tech Sheet 68056
Tech Sheet 68056
Tech Sheet 68056
Tech Sheet 68056
90° Elbow Brush AssemblyBrush assemblies are suitable for lubricating various moving machine components such as chains, cams, open gears, etc. Oil fl ow to each brush must be controlled by a meter unit or a control unit. Available with nylon and brass bristles.
Working Temperature:-30°C to 95°C
Tech Sheet 68056
Figure 1, Female, NPT
0502
B7490 1/8” Nylon 13.90
Spring Greasers
Refi llable
0524
205 56 66.50260 170 97.20