NCC Schedule

8/6/2019 NCC Schedule

1/23

ESTATE CIVIL HEAD OFFICE

IIT KHARAGPUR

Name of the work : Construction of New Building for N.C.C.

CIVIL WORKS

Item Description Unit Qty. Rate Amount(Rs.)

No.

1

Depth of excavation not exceeding 1500mm. Cum 750.00

Cum 50.00

2

Cum 10.00

3

Cum 765.48

Earth work in excavation of foundation trenches ordrains in all sorts of soil (including mixed soil butexcluding laterites or sandstone) includingremoving, spreading or stacking the soiles within alead of 75m as directed. The item includingnecessary trimming the sides of trenches, levelling,dressing & ramming the bottom, bailing out water as

requried complete.

Depth of excavation for additional depth beyond1500mm and upto 3000mm but not requried shorting

Earth work filling in foundation trencheds or plinthwith good earth in layer not exceeding 150mmincluding watering and ramming etc. layer by layercomplete. With earth obtained from excavation of

foundation

Filling in foundation or plinth by silver sand inlayers not exceeding 150mm as directed andconsolidating same by thorough satruration withwater ramming complete including the cost ofsupply of sand . Do by fine sand.


2/23

4

Sqm 2030.00

5

Cum 196.00

6

upto P.L.(+600 Lvl.)

Cum 257.00

Ground floor

Cum 237.00

First floor

Cum 54.98

Above first floor

Cum 63.50

7

upto P.L.(+600 Lvl.)Sqm 906.00

Ground floor

Sqm 2300.00

Single brick flat soling of picked jhama brickincluding ramming and dressing bed to proper leveland filling joints with powdered earth or local sand

Cement concrete with garded stone ballast (40mmsize excluding shuttering. In ground floor. 6:3:1ro ortion

Ordinary cement concrete (mix 3:1.5:1) M-20 withgarded stone chips (20mm down excludingshuttering and reinforcement, if any ground floor asper directed IS 456-2000 (Pakur/Chandil Varity)

Hire and labour charges for shuttering with centeringand necessary staging upto 4 m using approved stout props and thick hard wood planks of approvedthickness with requried bracing for concrete slabs, beams, column, lintels curved or straight out aftercompletion of work (upto roof of ground floor).Steel shuttering or 9 to 12mm thick approved quality

ply board shuttering in any concrete work.


3/23

First floorSqm 624.00

Above first floorSqm 115.00

8

upto P.L.(+600 Lvl.)MT 35.29

Ground floorMT 37.19

First floor

MT 10.65

Above first floor

MT 1.81

9

Cum 75.00

10

Ground floor

Cum 113.49

First floor

Cum 58.84

Above first floor

Cum 20.00

Reinforement for reinforced concrete work in allsorts of structure including distruibution bars,stirrups, binders etc. including supply of rods,

initials straightening & removal of loose rust, cuttingto requisite length, hooking and bending to correctshape, placing in proper position & binding with 16guage black anneled wire at every intersection,complete as per drawing & direction. For works infoundation, basement & roof of ground floor. Torsteel or Mild steel.

Brick work with 1st class bricks in cement mortar( 4 : 1 ). In foundation & plinth.

Brick work with 1st class bricks in cement mortar( 6 : 1 ). In superstructure ground floor.


4/23

11

Ground floor

Sqm 120.35

first floorSqm 75.63

Above first floor

Sqm 10.00

12

Sqm 70.00

13

Ground floor

Sqm 10.00

First floor

Sqm 10.00Above first floor

Sqm 5.00

14

Sqm 65.00

15

Ground floor

125mm thick brick work with 1st class brick incement mortar (4:1) in ground floor.

Extra for using approved H.B. netting in every thirdlayer in any floor.

75mm thick brick work with 1st class brick incement mortar (4:1) in ground floor.including H.B.netting in every alternate layer.

25mm thick damp proof course with cementconcrete with stone chips (4:2:1) & admisture ofwater proofing compound as per manufacturer'sspecification over a coat of polymer based paint,double chequred complete as directed .

Plaster (to wall, floor, ceiling etc.) with sand andcement mortar including rounding off or chamfering

corners as directed and raking out joints orroughening of concrete surface, including throating,noising and drip course where necessary (groundfloor). With 6:1 cement mortar.


5/23

20mm thick plaster

Sqm 591.82

15mm thick plaster

Sqm 2286.40

First floor

20mm thick plaster

Sqm 591.25

15mm thick plaster

Sqm 485.63

Above first floor

20mm thick plaster

Sqm 192.00

15mm thick plaster

Sqm 50.00

16

Ground floor

Sqm 840.91first floor

Sqm 212.93

17

Sqm 250.00

Plaster (to wall, floor, ceiling etc.) with sand andcement mortar including rounding off or chamferingcorners as directed and raking out joints orroughening of concrete surface, including throating,noising and drip course where necessary (groundfloor). With 4:1 cement mortar. 10mm thick plaster.

Neat cement punning about 1.5mm thick in walldado, window, sills, floor , drain etc.


6/23

18

Ground floor

Sqm 868.00

First floor

Sqm 213.00

19

Sqm 10.00

Artificial stone floor, dado, staircase etc. withcement concrete (4:2:1) with stone chips, laid inpanels as directed with toping made with ordinary orwhite cement (as necessary) and marbel dust in proportion (2:1) including smooth finishing androunding off corners and including application ofcement slurry before flooring works, using cement

@1.75 kg/sq.m all complete including all materialsand labour. 3 mm. thk topping. 25 mm thick.

Supplying, fitting & fixing 1st quality ceramic tilesof any size having mat finish in walls & floorsincluding borders to match with the existing work,set in sand cement mortar 4:1 including backingconcrete (1:2:4) & 4nos. of key stone (10mm) fixedwith areldite at the back of each tile & finishing the joints with white cement mixed with coulouringoxide of requried to match the colour of tiles. White.


7/23

20

Ground floorKg 119.70

First floorKg 140.00

21

Supplying fitting and fixing door frame with M.S.angle as per drawing & direction of requried section.But hings will have to be supplied as necessary& the holes for counter sunk machine screw andnuts will be such as to fit 8 to10 mm. iron screw.The counter sunk nut to be welded and suchscrews and nuts are to be supplied by the

contractor. The nuts are to be welded after carefulchecking with screw . All welding spots should be properly filed or rounded smooth includingcost of welding hinges for hinge cleates includingsupplying the same & also lugs for hasp bolt,socket bolts etc. and necessary M.S clamps of40mm. X 6mm. flat 225mm. long as perdirection welded to the frame includingsupplying & fixing clamps with cement concerete4:2:1 complete.

Supplying solid flush type doors of commercialsquality,the timber frame consisting of top & bottomrails & side styles of well seasoned timber 65mmwide each & the entire frame fitted with 37.5mmwide battens, placed both wayes in order to makethe door of solid core & internal leaping with Garjanor similar wood Veneers using phenol formaldehydeas glue etc. complete including fitting, fixingshutters in position but excluding the cost of hinges& other fittings in ground floor. 35mm thickshutters (in single leaf)


8/23

Ground floor

Sqm 13.23

first floor

Sqm 15.50

22

Sqm 118.50

23

Sqm 5.00

24

Qntl. 12.00

Supplying, fitting and fixing steel rolling shutterprofile type with 18 B.G. of approved type, steel to

the section 75 mm. wide , fitted with coil wire springto necessitate the fitting of required No. of C.I. pullyes on heavy type solid drawn seamless steeltube complete with locking arrangements both insideand outside specially built up side guide chennelsincluiding providing a hood for the steel rollingshutter in the room, painting two coats of approvedaluminium paint over a coat of red lead primercomplete.

Collapsible gate with 40 mm. x40mm.x 6mm. Tee astop and bottom guide rail 20 mm. x 10mmx 2 mmvertical channels 100 mm apart in fully stetcchdf position 20mm x 5 mm. MS flats as collapsiblebracing properly rivetted and washered including 38mm steel rollers including locking arrangements,fitted and fixed in position with lugs set in cementconcrete and including cutting necessary holes,chasing etc. in walls, floors etc. and making gooddamages complete.

MS gate of jail type as per approved design made ofstrong MS frame work, intermediate stiffeners &round/square bars or angle MS sheet (not less than14 gauge)gusset cleats atc. Including necessaryriveting, bolting, welding, locking & hangingarrangements, fitting & fixing complete as perdirection of the Engineer-in-charge.


9/23

25

Ground floor

Sqm 85.10First floor

Sqm 25.90

26 Top hung ventilators as per IS size 580mm Sqm 2.50

27

Ground floor Kg 1276.50

First floor Kg 388.50

28

Ground floor

Sqm 85.10

First floor

Sqm 25.90

Supplying, fitting and fixing windows & ventilatorswith or without integrated grills conforming to IS1038-1975 & manifacture from rolled steel sectionconforming to IS 7452-1974 with non friction projecting type, box type hinges, glazing clips ,lugs , locking bracket , handle plate etc. includinghoisting in position strightening if requried , fixing

lugs in cement concrete (4:2:1) with stone chips19mm down cutting holes & mending goodsdamages to match with existing surface complete inall respect excluding glazing. In ground floor.

Openable steel windows as per I.S sizes with sidehung shutters and horizontal glazing bars ,with orwithout fixed type ventilators.

MS integrated grills as per approved designedintergeted with steel window or ventilators jointscountinously welded with MS flat & bars.

Supply best Indian sheet glass panes set in putty andfitted and fixed with nails and putty complete in allfloors.(4 mm thick.)


10/23

29

Mtr. 5.00

Supplying fitting and fixing in position approvedP.V.C door frame made of extruded PVCmultichamber hollow section having dimensions60mm x 50mm / 60mm x 53mm and suitablyreinforced, horizontal section will be joined withvertical section by steel screws after inserting twonumber steel brackets as reinforcement makingsuitable for placing hinges,one steel tube 40mm x20mm x 18 gauge will be inserted on one fullvertical side of the frame ( hinge side ) asreinforcement, the frame will then be fixed in theopening with the help of PVC expandable fastenerand steel screw including cost of all materials andlabour, hire charges of tool andappliances,carriage of all materials taxes and allother incidental charges complete.


11/23

30

Sqm 3.80

31

Each 6.00

32

Each 39.00

Supplying fitting and fixing P.V.C door shutterofapproved quality & shade in position, the style &railof the P.V.C door shutter will be made of rigidP.V.C multicavity hollow chamber of suitablesizeand section with 2.5 mm wall thickness,thesection will have 2 no. built in beads , horizontal &vertical section shall be fixed to each other by self

tapping screws and 2 no. of M.S tubulargalvanised brackets of length 200mm x 80mmand other 100mm x 100mm both 18 gauge in eachcorner of shutter frame for placing hinges, polymerbased multicavity hollow section of 25mm thicknesswill be fitted in the middle with aluminium cleat andbe fitted in by polymer based panels of suitablesize and 2 no. of 6 mm dia bright rod will beinserted horizontally with both side check and nutsystem and streches were fixing of hinges/haspbolt/tower bolt/ door ring are required to be strongenough to with stand wear and tear. The rate isinclusive of cost of 100 mm .Anodised alluminiumhinges and cost of all materials and labour, hire oftools and plants and appliances.

Carriage of all materials taxes and allother incidental charges complete. 30mm thickshutter with 25mm thick panel (wall thickness

M.S. Clamp for fixing door and window framemade flat bent bar, end bifurcated, fixed incement concrete with stone chips(4:2:1) fittedand fixed complete as per direction(Cost of cement concrete will be paid separately)40mm x 6 mm above, 125 mm upto 170mm

length (the concreting will have to be done forequivalent thickness of 2 layers of brick workand for the entire width of the wall. Nodeduction on brick work will be made)

Iron butt hinges of approved quality fitted & fixedwith steel screw with ISI mark. 50mm x 40mm x2.5mm


12/23

33

Each 26.00

34

Each 13.00

35

Each 26.00

36

Each 17.00

37

Ground floor

Sqm 3127.31

First floor

Sqm 698.5638

Sqm 1375.00

Anodised aluminium barrel/ tower/socket bolt(fullcovered ) of approved quality manufactured fromextruded section conforming to IS 204/74 fitted andfixed with cdmium plated screw :200mm long x10mm dia. Bolt

Anodised aluminium Aldrop/ Siliding bolt of approved

quality manufactured from extruded sectionconforming to IS 2681/66 fitted and fixed withcomplete :250mm long x 19mm dia. Bolt

Anodised aluminium D-Type handle of approvedquality manufactured from extruded sectionconforming to I.S. specification (I.S 230/72)fittedand fixed complete. 100mm grip x 12mm diarod.With contineous plate base Hexagonal or round

Supplying fitting fixing fan hook for ceiling with 1mtr long 16mm dia rod complete including mending

damages.

Oil bound distemper (synthetic) to interior wallceiling with a coat of priming (as manufacturer'sspecification) including cleaning & smoothening thesurface (Two coats)

Applying decorative cement based paint of approvequality after preparing the surface including scrapingthe same thoroughly (plastered or concrete surface)as per manufacturer's specification. In ground floor.Two coat on new surface.


13/23

39

Ground floor

Sqm 34.40

First floor

Sqm 40.17

Ground floor

Sqm 450.00

First floor

Sqm 60.00

40

Mtr. 85.0041

Each 25.00

Painting with best quality synthitic enemel paint ofmake & brand including smoothening surface bysand papering etc. including using of approved puttyetc. on the surface of necessary

On Timber or Plastered surface (with super gloss)Two coats with any shade except white.

On steel or other metal surface (with super gloss)Two coats with any shade except white.

Supplying, fitting & fixing high density polythelenedown pipes with HDPE granules as specified inIS7328/1974 manufacturer's as per IS 4984-1987 &fitted with all necessary clamps nails includingmaking holes in walls, floor etc. & cutting trenchesin any soil, through masonary concrete structure etc.if necessary & mending good damages includingjointing with jointing materils complete. 100mm dia.

Supplying, fitting approved type ventilators in position after cutting holes in walls, setting incement mortar, mending damages to wall & plaster& two coats of paint of approved brand &shade.RCC ventilators of 20mm thick. Upto 0.10sq.m area


14/23

42

Minimum guarantee 10 years.

Sqm 1050.00

43 Vertical expansion joint.

Rmt 20.00

44 Horizontal Expension joint.

Roof treatment by cleaning of surface by removingloose materials dust etc.and apply 1st coat of sikaTop-seal 107(2 components acrylic compound) thenlaying of one layer of e-glass fibre. Aplly 2nd coatof sika-Top seal 107 above this 50 mm. averagethick screed concrete (1:2:4) and mix it with plasticizing admioxmuture Sika plastocrete Super

lais in slope (1 in 200) with chicken wire mesh andin panels.

a) Prepartion of joint:- Remove old plaster andformation of expension gap of 40 mm width. Renderwith non-shrink agent including Acryl and cure for 7days.

b) Fixing protective cover providing and fixing 22SWG(0.7mm thick)"U" shaped Aluminium sheetfixed with 4 mm dia Bolt and Washer Fixers withspacing not more than 300mm c/c, includingbnsealing all joints between aluminium and plastersurface, laps (100 mm ) between to strip, bolt headwith Polysulphide sealent etc. all complete.


15/23

Rmt 15.00

a) Prepartion of joint:- Taking out old coveringsystem of the expension gap and formation of 40mm wide expension gap including necessaryrendering with non-shrink cement morter.Providingand fixing (anchoring) aluminium "U" stripincluding seal;ing all joints between concrete,aluminium laps, bolt head etc with Polysulphide

sealent.

b) Covering the expension gap with 125 mm thick brick work in C.M. (1:4) of 300 mm to 500 mmaverage height keeping 250 mm apart from thecentre line of the expension gap including 12mmplastering the brick work with C.M (1:4)n and levelsmooth top finishing at one end brick work.Covering the top of expension gap with precastconcrete block with reinforcement 6 mm bothways@ 150 mm c/c 725 mm wide and Avg. 50 mm thick

and 1 m long. Over a bond course of C.M. (1:4) atone end and over a course of plastic sandwichedbituminous layer with a provision of lapn joint grove20 mm and 20 mm at the free edge.

c) Sealing the joints between covering slab and brickgroove with Polysulphide sealent conforming to IS:12110 and BS-4254 including necessary priming,bond breaking etc. all complete.

d) plastering the top R.C.C. slab with C.M. (1:4)including providing dripcourse at the end.


16/23

45

Rmt 10.00

Supplying with fitting and fixing Strips-Aluminiumfluted 3.15 mm thick and 150 mm wide vertical andhorizontal expansion joints of interior partion withnecessary screws.


17/23


18/23

6

Each 8.00

7

Each 2.00

8

Each 8.00

9

Each 12.00

10

15mm dia. Medium quality

Mtr. 20.00

25mm dia. Medium quality

Mtr. 28.00

Supplying fitting & fixing approved brand PVCconnector white flexiable with both ends couplingwith heavy brass CP nut 15mm dia. (i) 600mmlong

Supplying fitting fixing peets valves full way gummatel pattern best quality of approed brand

bearing ISI marking with fittings (tested to 21Kg /sqcm.). 25mm dia.

Supplying fitting fixing gun metal stop cock/bibcock of approve make & brand teated to 21Kg/Sq.cm.15mm dia.

Supplying, fitting & fixing CP bib cock or stopcock of approve make and brand tested toitem.Ordinary light 15mm dia.

Supplying , fitting & fixing G.I. pipes of TATA

make with all necessary accessories special vizsocket bent tee, union cross ,elbow, nipple, longscrew reducing tee, short pice etc. fitted withholder bates clamps including cutting pipesmaking threads fitting fixing etc. compete in alrespect including cost of all necessary fittings asrequried, jointings materials & two coats of painting with approved paints in any positionabove ground.


19/23

11

Mtr. 20.00

12

Each 4.00

13

Each 6.00

14

Each 4.00

15

Each 4.00

16

Each 2.00

Cast iron soil pipe only conforming to IS3989/1970 & IS 1729/196 with bobbins , nails etcincluding making holes in the wall, flor etc. &cutting trench etc. in any floor through masonaryconcrete & mending good damages withnecessary jointing materials & pinting two coatsto the exposed surface with approve dpaintcomplete. With lead caulked joints 100mm dia.

HCI bend with door conforming to ISS including jointing complete with lead caulked joint with100mm dia.

HCI bend without door conforming to ISSincluding jointing complete with lead caulked

joint with 100mm dia.

Supplying, fitting & fixing cast iron 'P' or 'S' trapconforming to IS 3989/1972 & 1729/1964including lead caulked joints & painting two coatsto the exposed surface.. P_trap100mm dia.

Cast Iron for Soil pipe line conforming to IS1729/1970 including jointing & fitting &fixing in position & painting two coats to theexposed surface complete including cost of allmaterials & labours. Single junction of

150mm x 100mm dia. With door. With leadcaulked joint.

Supplying, fitting & fixing CI Grating (round)100mm dia.


20/23

17

Each 1.00

18

Mtr. 30.00

Approved patent vent cowl ICI conforming to IS100mm dia.

Open joint stone ware pipe 100mm dia. Supplied,laid & fitting in position duly encircled all round by 150mm thick layer jhama metal (38mm to50mm size) including excavation of earth in any

soil upto requried depth including refilling trenchwatering & ramming complete.


21/23

19

Each 1.00

Each 4.00

20

(A) Constructing Inspection pit of insidemeasurement 600 mm x 600mm x upto 600 mm(depth) with 250mm thick at 1st class brick workin cement mortar (6:1) on all sides, bottom of the

pit consisting of 100 rom thick cement concrete(6:3: 1) withjhama khoa over a layer of jhama

brick flat soling, 12 mm thick (4: I) cement plasterto inside walls and out-side walls upto G.L. and20 mm. thick (4: I) plaster to bottom of the pit,

providing necessary invert with cement concrete(4:2: I) with jhama chips as per direction, neatcement finishing to entire internal surfaces, top ofthe pit cover with 100 mm thick R.C. C. slab (4:2:1) with stone chips and necessary reinforcementsupto 1 % and shuttering including 6 mm thickcement plaster (4: I) in all external surface of theSlab & one 560 mm. dia. R. C. C. manhole coverof approved makes supplied fitted & fixed in theslab with necessary fittings,necessary earth workin excavation sorts of soil, filling sides of pit, withearth and removing spoils after work complete inall respect.

Extra for each additional depth of 150 mm or partthereof beyond initial 600 mm depth.

Construction of Septic tank of differentcapacities as per approved drawing with 1 stclass brick work in cement mortar (4: 1)including two 560 mm dia. R.C.C. manholecover of approved make supplied. fitted andfixed in the top slab with necessary fittings. 19


22/23

Each 1.00

21

Each 2.00

22

Each 2.00

23

Each 2.00

cement finish to the internal surface and 12mm thick cement plaster (4: 1) to outside wallupto 200 mm below G. L. floor finished with25 mm thick grey artificial stone includingsupplying, fitting and fixing all necessaryspecials, fittings. S. W. tees., C.I. foot rest etc.including excavating earth in all sorts. of soil,

shoring, bailing and pumping out water asnecessary, ramming, dressing the bed andrefilling the sides of the tank with earth,removing spoils, filling, up the chamber withclearwater, removing foreign, materials fromthe chamber and including, constructing,attached inspection pit as per approveddrawing and connecting all necessary pipes,joints etc. with internal plaster work andartificial stone flooring to be done withadmixture of water proofing compound

5% by weight by cement, complete in allrespect as per direction of Engineer-in-charge. For 30 Users.

Supplying , fitting & fixing best quality Indianmake mirror 5.5mm thick silvering as per IS3438/1965 together with brass CP hinges. 550mmx 400mm

Supplying , fitting & fixing liquied soap holder.Cromium plated.

Supplying , fitting & fixing towel rail with twobrackets. Aluminium. 25mm dia. & 450mm long.


23/23

25

4.00465 mm x355mmx265mm

26

8.00

Flat back urinal (Half stall urinal) in whgiteviterous chinawire of approved make suppliedfitted and fixed in position with brass screws on75 mm.x 75mm.x75mm. Wooden blockscomplete.

Suppling fitting and fixing approved brand P.V.C.waste pipe with coupling at one end fitted withC.P. over brass nut 32 mm dia 750 mm long.

NCC Schedule

Documents

Transcript of NCC Schedule