Monthly Notifications Register

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2011-10-01 to 2011-10-31

Register issued on : 2011-11-02

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102478/0001 Project EstablishedICS :National Ref : BS 8581Title : Exchanging course related information. Course advertising profile

Relatedness :National : New

Subsector : A99 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102480/0001 Project EstablishedICS :National Ref : BS 8415:2005+A2Title : Monuments within burial grounds and memorial sites. Specification. Amendment


Subsector : A99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175957/0001 Project EstablishedICS :National Ref : PR NF X50-823Title : Industrial tourism - General quality service requirements


Subsector : A99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175958/0001 Project EstablishedICS :National Ref : PR NF X50-842Title : Economic relations between the protected area and adapted and principals


** End of Subsector **

** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 0206D120/0001 Project EstablishedICS : 93.025National Ref : E0206D120Title : Water wells - Design and constructionScope : This standard defines the general requirements to be fulfilled for what that matters wells

designing and building; in particular this standard deals with: - geological and hydro geological background check in the area; - litho-stratigraphic data analysis; - aquifer hydraulic parameters evaluation; - evaluation of the client's water needs; - designing; - individuation of the perforation technique compatible with both the target and the environmental problems; - well dimensional verification and technical compatibility with the scheduled procedures; - assistance to perforation; - advance test; - collecting of stratigraphic, hydraulic and perforation logs; - well's working designing; - environmental safety of the operations; - flow tests and working test of the well - building site; - handling of perforation residuals; - draining waters; - different perforation techniques; - mud technology; - parameters of the different perforation techniques; - terrain sampling; - advance test; - tubular products; - welding, tightening, centralizers; - replenishment and insulating products; - replenishment products laying; - cementation; - development techniques; - turbidity and sand content; - raising implants for flow tests; - flow tests execution; - testing; - perforation report; - correspondance certificate to design and standards.


Subsector : B02 Registration Date : 2011-10-31Organization : BDSCountry : Bulgaria Latest Date for Comments : 2012-12-31

Project ID : BG056050/0001Draft for public

enquiry

ICS :91.010.30, 91.080.10, 91.080.40, 93.040

National Ref : BDS EN 1994-2:2006/prNATitle : Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules

and rules for bridges - National AnnexScope : BDS EN 1994-2:2006/prNA establishes national determined parameters for design of

structures according BDS EN 1994-2 in Bulgaria.

Relatedness :National : REV/AMD BDS EN 1994-2:2006

Subsector : B02 Registration Date : 2011-10-31Organization : BDSCountry : Bulgaria Latest Date for Comments : 2012-12-31Project ID : BG056051/0001 Draft for public enquiryICS : 53.020.20, 91.010.30, 91.080.10National Ref : BDS EN 1993-6:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures - National

AnnexScope : BDS EN 1993-6:2007/prNA establishes national determined parameters for design of

structures according BDS EN 1993-6 in Bulgaria.

Relatedness :National : REV/AMD BDS EN 1993-6:2007


Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2011-10-18Organization : SUTNCountry : SlovakiaProject ID : 72103111/0001 Project EstablishedICS : 91.100.60National Ref : STN 72 7221-3Title : Thermal insulation products for building application – Part 2: Factory made products of

extruded polystyrene (XPS)Scope : This standard determines required values of properties of factory made products of

extruded polystyrene (XPS) by classes, levels or threshold values. It is applied for design and execution of buildings, standard types of constructions and categories of application.


Subsector : B03 Registration Date : 2011-10-31Organization : UNMZ Draft Issue Date : 2012-02-01Country : Czech Republic Latest Date for Comments : 2012-03-31Project ID : 73011111/0001 Project EstablishedICS :National Ref :Title : Execution of concrete structuresScope : The aim of the modification of National Annex on CSN EN 13670 is unification of

contemporary legislation and related Czech Standards. Use of new information for execution of concrete structures.

Relatedness :National : REV/AMD CSN EN 13670 (2010)

Subsector : B03 Registration Date : 2011-10-03Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-12Project ID : P0036966/0002 Draft for public enquiryICS :National Ref : PNE-EN 12390-8:2009/1MTitle : Testing hardened concrete - Part 8: Depth of penetration of water under pressureScope : This Standard includes a national annex which specifies a method for determining the mean

depth of penetration of water under pressure on hardened concrete.



Subsector B04: CEMENT

Subsector : B04 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175892/0001 Project EstablishedICS :National Ref : PR NF S61-937-11Title : Fire safety equipment - Operated safety systems - Part 11: Transfer fire-valves


Subsector : B04 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038479/0001 Project EstablishedICS :National Ref : PNE 80305Title : White cements.Scope : This standard revises the current standard of white cements to include new requirement for

the colour of these cements. The reference standards have also been updated.

Relatedness :National : REV/AMD UNE 80305:2011

Subsector : B04 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038480/0001 Project EstablishedICS :National Ref : PNE 80117Title : Methods of testing cements. Physical analysis. Colour determination in white cements.

Scope : This standard revises the current version concerning the determination of the colour.



Subsector B05: FIRE TESTS

Subsector : B05 Registration Date : 2011-10-31Organization : UNMZ Draft Issue Date : 2012-04-01Country : Czech Republic Latest Date for Comments : 2012-07-31Project ID : 73011411/0001 Project EstablishedICS :National Ref :Title : Fire protection of buildings - UndergroundScope : The aim of the new standard is unification of requirements for fire safety engineering of

underground



Subsector B07: GLASS

Subsector : B07 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00515879/0001 Project EstablishedICS :National Ref : 00515879Title : Glass in Building - Design and construction rules - Part 3:Point fixed glazing


Subsector : B07 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00515880/0001 Project EstablishedICS :National Ref : 00515880Title : Glass in Building - Design and construction rules - Part 4: Additional requirements for

anti-drop device


Subsector : B07 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00515881/0001 Project EstablishedICS :

National Ref : 00515881Title : Glass in Building - Design and construction rules - Part 5: Accessible glazing



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 0205C593/0001 Project EstablishedICS : 91.140.30National Ref : E0205C593Title : Energy performance of buildings - Part 3: Evaluation of primary energy need and of

system efficiencies for space cooling Scope : The technical specification provides data and methods for evaluating:

- systems efficiencies and the energy need for air conditioning systems - primary energy need for air conditioning systems The technical specification only applies to stationary systems for air conditioning with electrically operated machinery or absorption machinery The technical specification applies to newly design systems, retrofitting or to existing systems: - for cooling only; - for air conditioning systems The technical specification does not apply to individual components of the summer air conditioning systems for which instead refers to the specific product standards.

Relatedness :National : REV/AMD UNI/TS 11300-3:2010


Subsector B11: METAL STRUCTURES

Subsector : B11 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-15Project ID : CH110025/0001 Draft for public enquiryICS : 91.080.10National Ref : SIA 263Title : Steel structures

Relatedness :National : REV/AMD SIA 263 (2003)

Subsector : B11 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-15Project ID : CH110026/0001 Draft for public enquiryICS : 91.080.10National Ref : SIA 263/1Title : Steel Structures - Supplementary Specifications

Relatedness :National : REV/AMD SIA 263/1 (2003)


Subsector B12: MASONRY

Subsector : B12 Registration Date : 2011-10-26Organization : LSTCountry : LithuaniaProject ID : 10001011/0001 Project EstablishedICS : 91.100.10National Ref :Title : Mortar. Test methods. Determination of frost resistance of plaster and other finishes on

one sided freezingScope : This Lithuanian standard specifies the one-sided freezing method of determining the frost

resistance of concrete, ceramic and silicate blocks, bricks, reinforced concrete and structural elements with different strains of plaster and any (ceramic and glass tiles, natural stone slabs and etc.) inorganic finishing layers and identifies the operating conditions of the category.



Subsector B19: CERAMIC TILES

Subsector : B19 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102570/0001 Project EstablishedICS :National Ref : BS 5385-1Title : Wall and floor tiling. Part 1. Design and installation of ceramic, natural stone and mosaic

wall tiling in normal internal conditions. Code of practice


Subsector : B19 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102571/0001 Project EstablishedICS :National Ref : BS 5385-3Title : Wall and floor tiling. Part 3. Design and installation of internal and external ceramic and

mosaic floor tiling in normal conditions. Code of practice


Subsector : B19 Registration Date : 2011-10-03

Organization : BSICountry : United KingdomProject ID : 01102572/0001 Project EstablishedICS :National Ref : BS 5385-4Title : Wall and floor tiling. Part 4. Design and installation of ceramic and mosaic tiling in

special conditions. Code of practice


Subsector : B19 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102573/0001 Project EstablishedICS :National Ref : BS 5385-5Title : Wall and floor tiling. Part 5. Design and installation of terrazzo, natural stone and

agglomerated stone tile and slab flooring. Code of practice



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 (Secondary Subsector)

Registration Date : 2011-10-03

Organization : BSICountry : United KingdomProject ID : 01102479/0001 Project EstablishedICS :National Ref : BS 8582Title : Code of practice for surface water flood risk management


Subsector : B20 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-30Country : Switzerland Latest Date for Comments : 2011-12-02Project ID : CH110028/0001 Draft for public enquiryICS : 91.140.80National Ref : SN 592000Title : Building drainage - planning and execution

Relatedness :National : REV/AMD SN 592000 (2002)


Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 03200578/0001 Project EstablishedICS :National Ref : 03200578Title : Hose assemblies of stainless steel for gas - Safety requirements, testing, marking



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2011-10-05Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-14Project ID : P0038110/0002 Draft for public enquiryICS :National Ref : PNE 135334Title : Vertical signs. Retroreflective sheetings with glass beads. Characteristics and test

methodsScope : This project revises the previous version (which specifies the characteristics and test

methods for retroreflective sheetings with glass beads used in vertical signs) in order to align it with the corresponding European standard.


Subsector : B26 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038341/0001 Project EstablishedICS :National Ref : PNE 135340:2010/1MTitle : Vertical signs: Microprismatic polymeric retroreflecting sheetings. Characteristics and

test methods.Scope : This modification to the original standard incorporates the requirement to be applied to

colour sheetings obtained by screen printing.



Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024179/0001 Project EstablishedICS : 91.060.20National Ref : ÖNORM B 3418Title : Design and construction of snow protection systems on roofs

Scope : This Austrian Standard regulates the design and construction of snow protection systems for all sloped or curved roofs up to a slope of roof of 60° and with all roofing and waterproofing. The snow protection systems are against the sliding of snow and ice (calculated with ÖNORM B 1991-1-3 and EN 1991-1-3) and are fixed as protection for the roofings and waterproofing. This Austrian Standard refers to the execution of various types of snow protection systems, which have to be adapted to the roof substructure and the roofing and applicable for the different combinations.


Subsector : B27 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-30Project ID : CH110027/0001 Draft for public enquiryICS : 91.100.50National Ref : SIA 281Title : Waterproof sheeting

Relatedness :National : REV/AMD SIA 281 (2006)


Subsector B30: FLOOR AND SURFACING



Organization : BSICountry : United KingdomProject ID : 01102573/0001 Project EstablishedICS :National Ref : BS 5385-5Title : Wall and floor tiling. Part 5. Design and installation of terrazzo, natural stone and

agglomerated stone tile and slab flooring. Code of practice



Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2011-10-31Organization : UNMZ Draft Issue Date : 2012-02-01Country : Czech Republic Latest Date for Comments : 2012-03-31Project ID : 73011211/0001 Project EstablishedICS :National Ref :Title : Prefabricated reinforced components of lightweight aggregate concrete with open

structure with structural or non-structural reinforcementScope : The aim of the completion of National Annex on CSN EN 1520 ed. 2 is use of new

information for prefabricated reinforced components of lightweight aggregate concrete with open structure

Relatedness :National : REV/AMD CSN EN 1520 ed.2 (2011)


Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2011-10-18Organization : SIS Draft Issue Date : 2011-10-18Country : Sweden Latest Date for Comments : 2011-12-18Project ID : 00627801/0001 Draft for public enquiryICS : 03.080.20National Ref : 627801Title : Cleaning quality - System for the establishment and assessment for cleaning qualityScope : This standard is a Swedish translation of the Internordic standard INSTA 800:2010. The

system to describe and evaluate cleaning quality according to the framework laid down in EN 13549:2000, prepared by the dormant Technical committee CEN/TC 328 - Standard Measurement System for Cleaning Performance. The standard is the result of a collaborative effort of representatives from cleaning contractors, public and private property owners, empoyers' associations, research institutes and trade unions in Denmark Sweden and Norway


Subsector : B99 Registration Date : 2011-10-03Organization : BSICountry : United KingdomProject ID : 01102479/0001 Project EstablishedICS :National Ref : BS 8582Title : Code of practice for surface water flood risk management




Organization : BSICountry : United KingdomProject ID : 01102480/0001 Project EstablishedICS :National Ref : BS 8415:2005+A2Title : Monuments within burial grounds and memorial sites. Specification. Amendment


Subsector : B99 Registration Date : 2011-10-03Organization : BSICountry : United Kingdom

Project ID : 01102568/0001 Project EstablishedICS :National Ref : BS 3632Title : Specification for residential park homes


Subsector : B99 Registration Date : 2011-10-31Organization : UNMZCountry : Czech RepublicProject ID : 73009411/0001 Project EstablishedICS :National Ref :Title : Dressing rooms and facilities for hygieneScope : The aim of this revision is to update the content concerning mainly accessibility, but also

space requirements and relation to legislation.

Relatedness :National : REV/AMD CSN 73 4108

Subsector : B99 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-30Project ID : CH110023/0001 Draft for public enquiryICS : 91.060.20National Ref : SIA 312Title : Greening of rooftops


Subsector : B99 Registration Date : 2011-10-04Organization : SNV Draft Issue Date : 2011-09-23Country : Switzerland Latest Date for Comments : 2011-11-30Project ID : CH110024/0001 Draft for public enquiryICS : 91.060.20National Ref : SIA 118/312Title : General conditions for greening of rooftops


Subsector : B99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA176218/0001 Project EstablishedICS :National Ref : NF P14-010Title : Sustainable Development in Business Districts - Part 1 : General Principles

Relatedness :

National : New


** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 05701563/0001 Project EstablishedICS :National Ref : 05701563Title : Bake-off-Station in food retailing - Hygienic requirements for design and handling of a

bake-off-station in food retailing


Subsector : C01 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001683/0001 Project EstablishedICS : 67.100.10National Ref : NEN 6821:2011 nlTitle : Pasteurised milk and liquid milk products - Determination of contaminating bacteriaScope : This standard describes a method for the detection of contaminating bacteria in

pasteurised milk and non-acid milk products.


Subsector : C01 Registration Date : 2011-10-04Organization : UNMZ Draft Issue Date : 2011-10-30Country : Czech Republic Latest Date for Comments : 2011-11-30Project ID : 56000811/0001 Published StandardICS :National Ref :Title : Guides of good hygiene and manufacture practice - Eggs and egg productsScope : This technical standard provides rules and recommendations for implementation and

compliance with the principles of good hygiene and manufacturing practices in the production of eggs and egg products during manufacturing.

Relatedness :National : REV/AMD CSN 56 9603:2006

Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175889/0001 Project EstablishedICS :National Ref : PR NF V09-502Title : Sensory analysis - General guidance for the control, by sensory analysis, of the quality

of a product during its processing


Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175890/0001 Project EstablishedICS :National Ref : PR NF U47-105Title : Animal health analysis methods - Isolation and identification of Brucella spp., except B.

ovis and B. canis


Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175891/0001 Project EstablishedICS :National Ref : PR NF U47-008Title : Animal health analysis methods - Detection of antibodies against Ovine epididymitis by

the Complement Fixation Test


Subsector : C01 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175893/0001 Project EstablishedICS :National Ref : PR NF U47-310Title : Animal health analysis methods - Biological reagent control for the immunological

techniques used in animal health



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2011-10-03Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-02Project ID : P0034419/0002 Draft for public enquiryICS :National Ref : PNE 84766Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract cucumber (Cucumis

sativus L.)Scope : This standard determines the specifications required by the hydroglycolic extract of

cucumber in cosmetic uses.


Subsector : C03 Registration Date : 2011-10-03Organization : AENORCountry : Spain Latest Date for Comments : 2011-11-12Project ID : P0035816/0002 Draft for public enquiryICS :National Ref : PNE 84771Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract nasturtium (Tropaelum

majus L.)Scope : This standard establishes the specifications required by the hydroglycolic extract of

nasturtium (Tropaelum majus L.) in cosmetic uses.


Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038347/0001 Project EstablishedICS :National Ref : PNE 84660Title : Cosmetic raw materials. Plant extracts. Oat hydroglycolic extract (Avena sativa L.)Scope : This standard determines the specifications required by the OAT HYDROGLYCOLIC

EXTRACT in cosmetic uses.


Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038348/0001 Project EstablishedICS :National Ref : PNE 84658Title : Cosmetic raw materials. Plant extracts. Bladderwrack hydroglycolic extrac (Fucus

vesiculosus L.)Scope : This standard determines the specifications required by the bladderwrach hydroglycolic

extract in cosmetic uses.


Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038349/0001 Project EstablishedICS :National Ref : PNE 84659Title : Cosmetic raw materials. Plant extracts. Butchersbroom hydroglycolic extract (Ruscus

aculeatus L.)Scope : This standard determines the specifications required by the butchersbroom hydroglycolic

extract in cosmetic uses.

Relatedness :

National : REV/AMD UNE 84659:2006

Subsector : C03 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038500/0001 Project EstablishedICS :National Ref : PNE 84719Title : Cosmetic raw materials. Dentifrices. Tetrapotassium pyrophosphate. Determination of

phosphorus pentoxide content.Scope : This standard specifies a method for the determination of the content of phosphorous

pentoxide used in dentifrices.



Subsector C04: LABORATORY GLASSWARE

Subsector : C04 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175959/0001 Project EstablishedICS :National Ref : PR NF X15-221Title : Emergency safety showers - Part 5 : Plumbed-in body showers and water tank showers

for sites other than laboratories



Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175953/0001 Project EstablishedICS :National Ref : PR NFU42-002-1Title : Fertilizers - Fertilizers with declared micronutrient(s) content(s) for application to the soil

- Part 1 : micronutrient(s) under mineral chemical combination(s) form, exclusively


Subsector : C13 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175954/0001 Project EstablishedICS :National Ref : PR NFU42-003-1

Title : Fertilizers - Fertilizers with declared micronutrient(s) content(s) for leaf spraying - Part 1 : micronutrient(s) under mineral chemical combination(s) form, exclusively



Subsector C17: TREES AND PLANTS

Subsector : C17 Registration Date : 2011-10-17Organization : SUTNCountry : SlovakiaProject ID : 48000111/0001 Project EstablishedICS : 13.020.01, 65.020.99, 65.060.80National Ref : STN 48 2711Title : Forest protection. Forest protection against main bark borers on spruceScope : The object of the standard is the determination of ways on prevention, presence and

protection checking against the main bark borers on spruce, which are these kinds of bark beetle: Ips typhographus (L.), Pityogeneses chalcographus (L.) and Ips duplicatus (Sahlb.). There is added new kind of pest and the latest knowledge on bionomy of listed pests and on ways of checking and protection against them.

Relatedness :National : REV/AMD STN 48 2711


** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F02: UNITS & SYMBOLS

Subsector : F02 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001684/0001 Project EstablishedICS : 01.080.30National Ref : NEN 1414:2011 Concept nlTitle : Symbols for safety precautions on escape and rescue plansScope : This standard describes symbols for safety precautions on escape a nd rescue plans. It also

contains information about the making of a plan. The standard is applicable to plans which are a part of evacuation schemes; assault plans used by fire brigades or other aid bodies;business emergency plans for use by buildingmanagers of consultancies.


Subsector : F02 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001685/0001 Project EstablishedICS : 01.070National Ref : NEN 3011:2012 Concept nlTitle : Safety colours and safety signs in workplaces and public areasScope : This standard is applicable to safety colours and safety signs in workplaces and public areas

and replaces NEN 6088.


Subsector : F02 Registration Date : 2011-10-05Organization : NENCountry : NetherlandsProject ID : 50001686/0001 Project EstablishedICS : 47.020.30National Ref : NEN 3050:2011 Concept nlTitle : Identification colours for pipes conveying fluids in liquid or gaseous condition in land

installations and on board shipsScope : Identification colours for pipes conveying fluids in liquid or gaseous condition in land

installations and on board ships



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038506/0001 Project EstablishedICS :National Ref : PNE 71507

Title : Guidelines for the implementation of Organic Law 15/1999, of 13 December, on the protection of personal data in Small and Medium Size organizations

Scope : This standard provides guidelines to help Small and Medium Size organizations to implement the Organic Law 15/1999, of 13 December, on the protection of personal data. The scope applies to personal data recorded on a physical support which makes them capable of processing and to any type of subsequent use of such data by the public and private sectors.



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175949/0001 Project EstablishedICS :National Ref : PR NF X50-259Title : Risk management - Business continuity plan - Guidelines



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2011-10-13Organization : LST Draft Issue Date : 2011-10-17Country : Lithuania Latest Date for Comments : 2011-12-16Project ID : 10000969/0001 Draft for public enquiryICS : 01.120National Ref :Title : Standardization - Part 3: Structure and presentation of standards and other publications

- Chapter 3: Aspects for conformity assessmentScope : This Lithuanian standard defines recommendations for presentation of comformity

assessment aspects in the Lithuanian product standards ant other publications. This document is not applied for drafting of the documents by industry associations, purchasers, regulators, consumers and non-government groups, accreditation bodies, conformity assessment bodies, conformity assessment scheme owners and other interested parties, e.g. insurance organizations


Subsector : F99 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 15202309/0001 Project EstablishedICS :National Ref : 15202309Title : Fundamentals of maintenance



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024154/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 7794Title : Cross-country skis - Ski-binding screws - Requirements Scope : This International Standard specifies the dimensions, mechanical properties, mounting and

fastening characteristics of screws used for mounting ski bindings on cross-country skis.


Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024157/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 7331Title : Ski-poles for alpine skiing - Requirements and test methodsScope : This Standard defines the minimum requirements for safety in ski-poles for alpine skiing

and specifies test methods to check conformity with these requirements.


Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024176/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 10228Title : Cross-country skis - Binding mounting area - Requirements for test screws Scope : This International Standard specifies the dimensions, mechanical properties and fastening

characteristics of test screws used for testing the binding mounting area of cross-country skis.


Subsector : H04 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024194/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 7795Title : Cross-country skis - Ski-binding screws - Test methodsScope : This International Standard specifies test methods for determining the mounting and

fastening characteristics of screws that are intended for fastening ski binding to cross-country skis.



Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2011-10-14Organization : NSAICountry : IrelandProject ID : 01078880/0001 Project EstablishedICS : 91.060.50National Ref : I.S. 386Title : Industry guidance for the protection of children from strangulation and asphyxiation by

corded window products.Scope : Guidance on the procurement of assembled and sub-assembled blinds, draperies and

components (including the safety of corded window products).

Relatedness :National : REV/AMD I.S. 386


** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024163/0001 Project EstablishedICS : 21.060.30National Ref : ÖNORM M 1621Title : Retention of bolted assemblies - GeneralScope : This ÖNORM defines the retention of bolted assemblies in the mechanical engineering. It

contains the reasons for the loss of the pretensioning force of bolted assembolies and possioble counteractions. It also gives recommendations for the use of prevailing torque type elements and their properties.


Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701948/0001 Project EstablishedICS :National Ref : 06701948Title : Slotted pan head screws with small head


Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701949/0001 Project EstablishedICS :National Ref : 06701949Title : Slotted pan head screws with small head and full dog point


Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701950/0001 Project EstablishedICS :National Ref : 06701950Title : Slotted pan head screws with shoulder


Subsector : I02 Registration Date : 2011-10-11Organization : DIN

Country : GermanyProject ID : 06701951/0001 Project EstablishedICS :National Ref : 06701951Title : Slotted raised countersunk head screws with full dog point


Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701952/0001 Project EstablishedICS :National Ref : 06701952Title : Slotted countersunk head screws with full dog point


Subsector : I02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 06701953/0001 Project EstablishedICS :National Ref : 06701953Title : Slotted shoulder screws



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 12800231/0001 Project EstablishedICS :National Ref : 12800231Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part

175: Inserts, indexable


Subsector : I09 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 12800237/0001 Project EstablishedICS :National Ref : 12800237

Title : Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming



Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)

Subsector : I17 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 0207D100/0001 Project EstablishedICS : 13.020.01National Ref : E0207D100Title : Major hazards process plants - Safety management systems - Essential requirementsScope : The standard specifies the basic requirements for the safety management systems

applicable to all the plant life cycle phases and the specific requirements to carry out the operational activities.

Relatedness :National : REV/AMD UNI 10617:2009

Subsector : I17 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 10600471/0001 Project EstablishedICS :National Ref : 10600471Title : Conveyors for feed tables in textile industry


Subsector : I17 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 5001B190/0001 Project EstablishedICS : 43.180National Ref : U5001B190Title : Safety of machinery - Car wash - Safety requirements, test methodsScope : This standard deal with the hazards, hazardous situations and events and specifies the safety

requirements, the protective measures and the test methods relevant to gantry carwash machines (single or multiple), tunnel carwash machines and self-service carwash machines for washing motor vehicles. This standard takes into account / considers the intended use and reasonably foreseeable misuse (of the mentioned carwash machines) and nor it deals with no-brush high-pressure carwash machines. This standard does not deal with single brush handle controlled carwash machines, nor it deals with drive-through carwash machines and no-brush high-pressure carwash machines for washing motor vehicles. This standard does not deal with the safety requirements relevant to the equipments

Scope : installed to service the carwash machines, nor it deals with carwash machines installed into potentially explosive areas.



Subsector I18: MINING

Subsector : I18 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00802222/0001 Project EstablishedICS :National Ref : 00802222Title : Mine plans - Deep mining - Part 6: Safekeeping of mining produced hollows


Subsector : I18 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00802228/0001 Project EstablishedICS :National Ref : 00802228Title : Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions,

requirements


Subsector : I18 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 00802229/0001 Project EstablishedICS :National Ref : 00802229Title : Rock drilling - Round thread connections for percussive drilling equipment - Dimensions,

design



Subsector I23: PUMPS

Subsector : I23 Registration Date : 2011-10-19Organization : TSECountry : TurkeyProject ID : t0011146/0001 Project EstablishedICS : 23.100.10

National Ref :Title : Submersible Pumps for Clean WaterScope : This standard covers submersible pumps with one inlet apening, coupled with an electric

motor and used generally in deep wells for supplying dean water.



Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 01200348/0001 Project EstablishedICS :National Ref : 01200348Title : Dispense systems for draught beverages - Part 5: Testing


Subsector : I99 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 08000020/0001 Project EstablishedICS : 03.040National Ref : U08000020Title : Non-regulated professions - Extrajudicial counsellor for compensation for damage -

Definition of knowledge, skill and competence requirementsScope : This standard specifies the requirements for the activity of compensation for damage in its

wider acceptation, i.e. resulting from any contractual or extra-contractual liability. The requirements for the extrajudicial counsellor are defined in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF.


Subsector : I99 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 08000187/0001 Project EstablishedICS :National Ref : 08000187Title : Medical X-ray equipment up to 300 kV - Rules of construction for structural radiation

protection



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M15: METALLIC CORROSION

Subsector : M15 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175946/0001 Project EstablishedICS :National Ref : PR NF A05-301Title : Aluminium alloys - Stress corrosion cracking of thick products



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2011-10-24Organization : HZNCountry : CroatiaProject ID : 00028289/0001 Draft for public enquiryICS : 75.160.20National Ref : nHRN DIN 51603-1Title : Liquid fuels -- Fuel oils -- Part 1: Fuel oils EL, Specifications (DIN 51603-1:2011)


Subsector : N03 Registration Date : 2011-10-19Organization : TSECountry : TurkeyProject ID : t1012154/0001 Project EstablishedICS : 75.100National Ref :Title : Lubricants-Used in textile machines Scope : This standard specifies lubricating oils used for textile machines.



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038499/0001 Project EstablishedICS :National Ref : PNE 53270Title : Plastics. Barcol hardness test.Scope : This standard specifies a method for the determination of hardness for plastics using the

procedure proposed by Barber and Coleman


Subsector : N09 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038501/0001 Project EstablishedICS :National Ref : PNE 53126Title : Plastics. Determination of coefficient of linear thermal expansionScope : This standard specifies a method for the determination of coefficient of linear thermal

expansion


Subsector : N09 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038502/0001 Project EstablishedICS :National Ref : PNE 53316Title : Plastics. Glass reinforced plastics. Determination of chemical resistanceScope : This standard specifies a method for the determination of chemical resistance of the glass

reinforced plastics



Subsector N10: CORK

Subsector : N10 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175882/0001 Project EstablishedICS :National Ref : PR NF B57-110Title : Agglomerated Cork stoppers or agglomerated cork stoppers with one washer of natural

corkwood for sparkling wines and gasified wines and sparkling beverages - Mechanical and physical test methods


Subsector : N10 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175883/0001 Project EstablishedICS :National Ref : PR NF B57-120Title : Agglomerated Cork stoppers or agglomerated cork stoppers with two washers of natural

corkwood for sparkling wines, quality sparkling wines, quality aromatic sparkling wines and aerated sparkling wines - Mechanical and physical test methods



Subsector N11: WOOD-BASED PANELS

Subsector : N11 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024162/0001 Project EstablishedICS : 79.060.99National Ref : ÖNORM B 3023

Title : Solid wood panels - Three-ply formwork panels - Types and requirementsScope : This Austrian Standard is to be used on three-ply formwork panels with a nominal thickness

of 18 mm to 27 mm. This Standard describes the types and defines the requirements. Essential modifications applies to upgrading the thickness range, incorporate of instructions for the use of panels for the production of fair-faced concrete.



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2011-10-12Organization : ASICountry : Austria

Project ID : 00024164/0001Project

Established

ICS :23.040.20, 23.040.45, 91.140.80, 93.030

National Ref : ÖNORM B 5166-3Title : Plastic piping systems for renovation of underground non-pressure drainage and

sewerage networks - Part 3: Complementary provisions concerning the proof of conformity for lining with cured-in-place pipes according to ÖNORMEN EN ISO 11296-1 and -4

Scope : Additionally to ÖNORM EN ISO 11296-1 and -4 this standard includes provisions, which have to be fullfilled according the procedure given in the national foreword of ÖNORM EN ISO 11296-4, to proof conformity of products according § 3 (2) of the Federal Act on Standardization of 1971. This standard is valid for lining with cured-in-place pipes for renovation of underground nonpressure drainage and sewerage networks.


Subsector : N14 Registration Date : 2011-10-12Organization : ASICountry : AustriaProject ID : 00024177/0001 Project EstablishedICS : 23.040.20, 23.040.45, 93.025National Ref : ÖNORM B 5168-2Title : Plastics piping systems for renovation of underground water supply networks - Proof of

conformity with standards - Part 2: Supplementary provisions for lining with close-fit pipes according to ÖNORM EN ISO 11298-1 and ÖNORM EN ISO 11298-3

Scope : Additionally to ÖNORM EN ISO 11298-1 and -3 this standard includes provisions, which have to be fullfilled according the procedure given in the national foreword of ÖNORM EN ISO 11298-3, to proof conformity of products according § 3 (2) of the Federal Act on Standardization of 1971. This standard is valid for pipes polyethylen (PE) and fittings of PE to build up lining system for renovation of underground water supply networks. Is is applicable for plastic lining systems, which are used for a service temperatur of 20 °C as reference temperature.


Subsector : N14 Registration Date : 2011-10-12Organization : ASICountry : Austria

Project ID : 00024178/0001Project

Established

ICS :23.040.20, 23.040.45, 91.140.80, 93.030

National Ref : ÖNORM B 5166-2Title : Plastic piping systems for renovation of underground nonpressure drainage and

sewerage networks - Part 2: Complementary provisons concerning the proof of conformity for lining with close-fit pipes according to ÖNORMEN EN ISO 11296-1 und -3

Scope : Additionally to ÖNORM EN ISO 11296-1 and -3 this standard includes provisions, which have to be fullfilled according the procedure given in the national foreword of ÖNORM EN ISO 11296-3, to proof conformity of products according § 3 (2) of the Federal Act on Standardization of 1971. This standard is valid for pipes with homogeneous wall of polyethylen (PE) or unplasticized poly(vinyl chloride) (PVC-U) and fittings of PE or PVC-U to build up lining system for renovation of underground nonpressure drainage and sewerage networks. Is is applicable for plastic lining systems, which are used for a service temperatur of 20 °C as reference temperature.


Subsector : N14 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 05401365/0001 Project EstablishedICS :National Ref : 05401365Title : Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions

and technical delivery conditions



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2011-10-20Organization : SNCountry : NorwayProject ID : NOT11018/0001 Project EstablishedICS : 91.120.20National Ref : prNS 8175Title : Acoustic conditions in buildings - Sound classification of various types of buildingsScope : This standard specifies limit values for sound quality classes in the form of: airborne sound

insulation; impact sound insulation; sound level (noise level); room acoustic measures (reverberation time, reverberation time related to room height, average acoustic absorption coefficient, STI etc. ).In this standard, limit values are given for dwellings, constructions for public and work buildings and handles in special schools and other buildings used for teaching, day-care facilities for schoolchildren, first-year classrooms, hospitals and care institutions, overnight accommodation, offices, etc. For each type of building or area of use, the limit values are divided into four sound quality classes according to expected use and requirements regarding the building at normally furnished units. All the different criteria for acoustic conditions given for a sound quality class shall be satisfied for a building or parts of a building to be classified in a class. The guidelines for assessing compliance are presented in annex B (informative).To take care of accessibility for all (universal design), criteria are given, in addition to room and building acoustics, to use of sound transmission systems (induction coil, sound amplification systems and similar) or other individual technical aids when needed, cf. Technical Building Regulations. Sound reflecting characteristics of buildings support the visually disabled to orientate. This standard can be used to classify buildings or parts of buildings according to the acoustic conditions in the building, to lay down requirements regarding acoustic conditions for all or parts of buildings that are higher than the minimum requirements pursuant to the Building Technical Regulations. It allows producers to declare the sound quality classification of buildings and provides instructions for compliance with the sound requirements pursuant to the Building Technical Regulations. This standard also represents an opportunity to set standardised



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 01102479/0001 Project EstablishedICS :National Ref : BS 8582Title : Code of practice for surface water flood risk management


Subsector : S09 Registration Date : 2011-10-25Organization : AFNOR

Country : FranceProject ID : FA175951/0001 Project EstablishedICS :National Ref : PR XP T90-223Title : Water quality - Determination of some medicinal residues in the dissolved fraction of

waters - Solid-phase extraction method and liquid chromatography-mass spectrometry (MS/MS) analysis



Subsector S22: ENERGY SAVING

Subsector : S22 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175950/0001 Project EstablishedICS :National Ref : PR NF X30-418Title : Waste - Determination of the permeability of a ground by opened type, double ring

infiltrometer test



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 11903280/0001 Project EstablishedICS : 13.080.20National Ref : DIN 19683-9Title : Soil quality - Physical laboratory tests - Part 9: Determination of the saturated hydraulic

water conductivity in the cylindrical core-cutter



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2011-10-19Organization : DS Draft Issue Date : 2007-07-16Country : Denmark Latest Date for Comments : 2012-01-01Project ID : 0M221038/0001 Project EstablishedICS : 11.020National Ref : DSF/DS 2451-5:2011Title : Infection control in the health care sector - Part 5: Requirements for prevention of

surgical site infectionsScope : This standard specifies requirements for infection preventive actions in the perioperative

course and includes: - preoperative preparation of patients before operation - the

Scope : microbial cleaness of the air in the operation room - pressure conditions in the operation room - behaviour of the personnel - working clothes and barrier clothes - bandage - antibiotic prophylaxis



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13202240/0001 Project EstablishedICS :National Ref : 13202240Title : Exhaust gas lines on ships - Gaskets - Part 1: For flanged connections heavy design


Subsector : T01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13202241/0001 Project EstablishedICS :National Ref : 13202241Title : Exhaust gas lines on ships - Gaskets - Part 2: For flanged connections light design


Subsector : T01 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13202369/0001 Project EstablishedICS :National Ref : 13202369Title : Recessed handholes and footholes in chain lockers


Subsector : T01 Registration Date : 2011-10-27Organization : UNICountry : ItalyProject ID : 81041480/0001 Project EstablishedICS : 47.020.01National Ref : U81041480Title : End-of-life treatment of marine units, yachts, small crafts and equipmentsScope : This standard defines the requirements for the end-of-life treatment of marine units,

yachts, small crafts and equipments and the connected activities. It also defines the relationship between owners and the subjects responsible of the management of the end-of-life procedures.



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2011-10-11Organization : DINCountry : GermanyProject ID : 13114754/0001 Project EstablishedICS : 49.025.30National Ref : DIN 65083Title : Aerospace - Heat treatment of castings of titanium and titanium alloys



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2011-10-18Organization : LST Draft Issue Date : 2011-11-01Country : Lithuania Latest Date for Comments : 2012-01-01Project ID : 10000996/0001 Draft for public enquiryICS : 43.040.20National Ref :Title : Special service vehicles - Colouring, distinctive marks, special light and sound signals -

Technical requirementsScope : The standards specifies technical reguirements for colouring schemes, distinctive marks,

such as emblems, inscriptions, special light and sound signals for special service vehicles



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2011-10-31Organization : AENORCountry : SpainProject ID : P0038387/0001 Project EstablishedICS :National Ref : PNE 199121-4:2010/1MTitle : Road traffic management equipment. Cinemometers. Stationary cinemometers. Part 4:

Functional specifications and applying protocolsScope : It introduces modifications regarding metrology in the standard, that comprises both

functioning specifications and applying communication protocols related to equipments for measuring road vehicles speed (cinemometers) and operating statically; that is to say, placed in stationary locations enabling connectivity and exchange of information on a regular basis with one or several control centres as well as defining functioning characteristics of the equipment itself. Specifications for moving cinemometers are also included.

Relatedness :National : REV/AMD UNE 199121-4:2010

Subsector : T19 Registration Date : 2011-10-31Organization : AENOR

Country : SpainProject ID : P0038400/0001 Project EstablishedICS :National Ref : PNE 199092-2Title : Road traffic management equipment. Video devices. Video manager. Part 2:

Communication Protocol for IP Video ManagersScope : This standard defines the communication commands Video Manager with computers and

video encoders video decoders for use in control centers



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2011-10-25Organization : AFNORCountry : FranceProject ID : FA175835/0001 Project EstablishedICS :National Ref : PR NF Z67-137Title : Exchange format in maritime and transport insurance

Relatedness :National : REV/AMD NF Z67-137:201105 (Z67-137)


** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

Monthly Notifications Register

Documents

Transcript of Monthly Notifications Register