Information procedure - ISS · 2015-01-16 · Information procedure Page 1 Monthly Notifications...

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2014-12-01 to 2014-12-31

Register issued on : 2015-01-06

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A04: TRANSPORTATION SERVICES

Subsector : A04 Registration Date : 2014-12-12Organization : SNCountry : Norway

Project ID : NOT14014/0001 Project Established

ICS :National Ref : prNS 11031Title : Universal design - Passenger transport - Technical requirements for buses Scope : This Standard provides requirements to universal design of buses in class I, II and III. The

standard includes requirements to buses and to a limited degree to infrastructure.

Relatedness :National : New :



ICS :National Ref : prNS 11032Title : Universal design - Passenger transport - Passengers rights Scope : The standard includes operational requirements for passengers' rights in the field of road

transport, rail transport, air transport and maritim transport. It includes requirements to universal design related to ticketing, assistance, information, rights in case of delays and complaints.




ICS :National Ref : prNS 11033Title : Universal design - Passenger transport - Transport servicesScope : The standard includes requirements to staff-implemented services the field of public

transport.It includes requirements to services in road transport, rail transport, air transport and maritim transport. The standard includes requirements to the design of services and to perform services


** End of Subsector **

Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2014-12-22Organization : UNI

Country : Italy

Project ID : 49010741/0001 Project Established

ICS : 03.100.10National Ref : U49010741Title : Maintenance - Guidelines for management of maintenance materials - Part 1: General

aspects and organizational problemsScope : This standard presents general aspects of material management for maintenance and gives

some examples on the function "management of technical materials" in a factory organigramme and its possible links with other internal functions, in order to address to a choice.

Relatedness :National : REV/AMD UNI 10749-1:2003 :

Subsector : A05 Registration Date : 2014-12-22Organization : UNICountry : Italy


ICS : 03.100.10National Ref : U49010742Title : Maintenance - Guidelines for management of maintenance materials - Part 2: Criteria

for classification, codification and standardization Scope : This standard provides the criteria for classification, coding and standardization in order to

allow the homogeneous groups of objects or entities and their analysis.





for the choice of materials to be managed Scope : This standard provides guidance on the criteria for the selection of technical materials to be

managed for the maintenance and illustrates the internal and external factors that influence these criteria.




ICS : 03.100.10National Ref : U49010744

Title : Maintenance - Guidelines for management of maintenance materials - Part 4: Criteria for operational management

Scope : This standard provides guidance on the criteria of technical materials management for maintenance and the methods that can be used for the definition of management parameters that contribute to the consistency of inventories. This standard gives criteria to manage and to appraise stock materials.





for purchasing, tests and final checkScope : This standard provides guidance for the procurement, testing and checking of technical

materials for maintenance.




ICS : 03.100.10National Ref : U49010746Title : Maintenance - Guidelines for management of maintenance materials - Part 6:

Administrative criteriaScope : This standard provides guidance on the methods and criteria that can be used for the

determination of unit values of loading, unloading and storage of materials in stock.



Subsector A09: FACILITY MANAGEMENT


Project ID : NOT14012/0001 Draft for public enquiry

ICS : 91.060.01National Ref : prNS 6425Title : Requirements and recommendations for the provision of operation and maintenance

services for buildings and propertyScope : This Standard gives requirements and recommendations for the provision of operation- and

maintenance services for buildings and property, in public and private sector, internal or

external terms. It provides a framework and a reference system for procurement in the field of operational and maintenance services for buildings and property. The scope of the standard does not include transfer of personnel, cf. business transfers legislation.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2014-12-08Organization : AFNORCountry : France


ICS :National Ref : PR NF S62-250Title : Firefighting equipment - Flexible tanks for external firefighting - Rules for installation,

delivery acceptance and maintenance




ICS :National Ref : PR NF S62-200Title : Firefighting equipment - Pillar hydrants and flush hydrants - Rules for installation, delivery

acceptance and maintenance




ICS :National Ref : PR NF S61-240Title : Firefighting equipment ¿ Suction devices for external firefighting ¿ Requirements and test

methods


Subsector : B01 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS : 23.040.60National Ref : DIN 14368Title : Branchpipe-holder for nominal pressure 16




ICS : 13.220.10National Ref : DIN 14822-1Title : Coupling spanner for fire fighting fittings - Part 1: Coupling spanner type BC




ICS : 13.220.10National Ref : DIN 14822-2Title : Coupling spanner for fire fighting fittings - Part 2: Coupling spanner type ABC




ICS :National Ref : 03100974Title : Firefighting and rescue service vehicles - Part 3: Coloration and special markings




ICS :National Ref : 03100975Title : Working light for low voltage



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2014-12-04

Organization : BASCountry : Bosnia and Herzegovina


ICS : 91.010.30National Ref : prBAS EN 1990/NA:2015Title : Eurocode - Basis of structural design - National annexScope : This document constitutes the National Annex to BAS EN 1990:2014, "Eurocode: Basis of

structural design". The European Standard EN 1990 allows national safety parameters to be specified for a number of points. These national determined parameters (NDP) cover alternative procedures, the provision of individual values, and the selection of classes from designated classification systems. The relevant parts of the text are identified in the European Standard by references to the possibility of national choice.



Subsector B03: CONCRETE



ICS :National Ref : PR NF P98-139Title : Asphalt. Wearing course : bitumen emulsion asphalt concrete. Definition. Classification.

Characteristics. Manufacturing. Laying.



Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2014-12-18Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8213-4Title : Windows, doors and rooflights. Part 4: Code of practice for the survey and

installation of windows and external doorsets


Subsector : B08 Registration Date : 2014-12-18Organization : BSICountry : United KingdomProject ID : 01403599/0001 Project

EstablishedICS :National Ref : BS 4873Title : Aluminium alloy windows and doorsets. Specification


Subsector : B08 Registration Date : 2014-12-22Organization : UNICountry : Italy


ICS : 91.060.50National Ref : U87007740Title : Windows, doors and shutters - Roles, responsibilities and contractual indications in the

installationScope : The standard defines roles and responsibilities of the stakeholders involved in the

installation process, from design to final control, of windows, external and internal doors and shutters.

Relatedness :National : REV/AMD UNI 10818:1999 :


Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2014-12-02Organization : SIS Draft Issue Date : 2014-12-02Country : Sweden Latest Date for Comments : 2015-02-02

Project ID : 024300-1/0001 Project Established

ICS :National Ref : 24300-1Title : Energy performance of buildings - Part 1: Power classification of space heatingScope : Procedure for determining indicator values, limits and rules for power rating and content of

certificates




ICS :National Ref : 24300-2Title : Energy performance of buildings - Part 2: Classification of energy useScope : Indicators to express the energy performance - Prcedure for determining the energy values,

limits and rules for the energy classification and content for certificates for classification of energy use.




ICS :National Ref : 24300-2Title : Energy performance of buildings - Part 4: Classification of domestic or business energy

use Scope : Indicators to express classificaton of household and business electricity and operational

procedure for the determination of indicator values, limits and rules for energy classification and contents of certificates for classificaton of household and business energy



Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2014-12-22Organization : UNICountry : Italy


ICS : 79.040National Ref : U40006592Title : Structural timber - Visual strength grading for structural timbers - Part 2: Visual strength

grading rules and characteristics values for structural timber populationScope : The standard indicates the rules for the visual strength grading of Italian structural timber



Subsector B13: SOLAR ENERGY

Subsector : B13 Registration Date : 2014-12-03Organization : NENCountry : Netherlands


ICS :27.160, 91.060.10, 91.060.20

National Ref : NEN 7250:2014/A1:2014 Concept nlTitle : Solar energy systems - Integration in roofs and facades - Building aspectsScope : This document contains amandments of NEN 7250:2014.


Subsector : B13 Registration Date : 2014-12-04Organization : AENORCountry : Spain Latest Date for Comments : 2015-01-13

Project ID : P0042311/0002 Draft for public enquiry

ICS :National Ref : PNE 206010Title : Tests for the verification of the performance of solar thermal power plants with parabolic

trough collector technology.Scope : The purpose of this standard is to provide procedures and guidelines for acceptance testing

of complete parabolic-trough collector (PTC) solar thermal power plants on the uncertainty level given in the ISO/IEC Guide 98-3, “Guide to the Expression of Uncertainty in Measurement.” It is applicable to acceptance testing in such power plants, as well as in any other scenario in which their features must be known. This standard establishes the measurement instrumentation and techniques for determining the following parameters required for acceptance of complete solar thermal power plant features: • Available solar radiation • Plant electricity consumptions • Net electricity generation • Non-solar energy • Net plant performance Other parameters that characterize the solar thermal power plant system features are not dealt with in this standard, but are the subject of other complementary standards. This standard is applicable to solar thermal power plants of any size that employ parabolic-trough collector concentrating systems, where the Sun is the main source of energy, and all elements and systems are operative. Such power plants may optionally have non-solar energy sources, such as natural gas or other renewable energies, and a thermal storage system.



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 01.040.13, 13.060.30National Ref : ÖNORM B 2500Title : Waste water management - Formation and disposal of waste water - Terms, definitions

and symbolsScope : This standard contains terms, definitions and symbols in addition to ÖNORM EN 16323,

which are additionally used in the area of sanitation and wastewater engineering.


Subsector : B20 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 23.040.01, 93.020, 93.040National Ref : ÖNORM B 2503Title : Drain and sewer systems - Design, construction, testing, operation - Complementary

provisions concering ÖNORM EN 476, EN 752 and EN 1610Scope : The present standard contains requirements for the design, implementation and testing of

drain and sewer systems, which are not given in ÖNORM EN 1610 or other applicable European standards. In the line of ÖNORM EN 1610 national specifications regarding health and safety are taken into account to obtain the state of the art in Austria. This standard has to be applied together with ÖNORMEN EN 476, EN 752 and EN 1610. This standard applies to the testing of newly constructed and renovated sewage pipes, manholes, inspection openings and containers. It contains requirements for the inspection of pipelines with air or water. Also guidelines for the examination of manholes, inspection openings and containers with water are given in this standard.




ICS :National Ref : PR NF P16-006Title : Design of private (independent) sewerage systems


Subsector : B20 Registration Date : 2014-12-15Organization : NBNCountry : Belgium

Project ID : BE061247/0001 Project Established

ICS :23.040.50, 91.100.30, 93.030

National Ref : prNBN B 21-106/A1, ed 1Title : Concrete pipes and fittings, unreinforced, steel fibre and reinforced

Relatedness :National : NewEuropean : Not Equivalent to EN 1916:2002

Subsector : B20 Registration Date : 2014-12-15Organization : NBNCountry : Belgium

Project ID : BE061249/0001 Project Established

ICS : 91.100.30, 93.030

National Ref : prNBN B 21-101/A1, ed 1Title : Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced -

National supplement to NBN EN 1917:2002

Relatedness :National : NewEuropean : Not Equivalent to EN 1917:2002


Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT



ICS : 91.140.40National Ref : NPR 3378-0:2014 Concept nlTitle : Guidelines for gas installations - Part 0: GeneralScope : NPR 3378-0 gives indications and examples how to meet the regulations for gas installations




ICS : 23.040.20, 93.030National Ref : NTA 8032:2014 Concept enTitle : Renovation cast iron piping systemswith pipe liner method Scope : NTA 8032 contains agreements concerning design, construction, maintenance and quality

assurance of the pipe liner method for the renovation of cast iron piping systems.



Subsector B30: FLOOR AND SURFACING



ICS : 91.060.30, 97.150National Ref : NEN 7909:2014 Concept nlTitle : Slip resistance of floorings - Requirement and determination methodScope : NEN 7909 gives the requirement and determination method for slip resistance of horizontal

or slope flooring in a public or working space. The dynamic friction coefficient is a measure for the slip resistance and gives an indication of the foot trafficking. The flooring may exist of one or more products. The actual slip resistance can be measured any time with the methods of NEN 7909 on location or in a laboratory.



Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS

Subsector : B34 Registration Date : 2014-12-02Organization : SNCountry : Norway


ICS : 91.060.20National Ref : prNS 3840-1Title : Green roofing - planning, design, execution and maintenance - Part 1 Extensive roofsScope : This Norwegian standard gives requirements and recommendations for planning, design,

execution and maintenance of extensive roofs. It describes terminology and defines minimum requirements which facilitates green roof that is well designed and aesthetically pleasing and durable over time. This standard is for extensive vegetation, such as Sedum spp. This standard applies in all climate zones of Norway. In this standard green roof is in the meaning of vegetation on a construction without contact with the subsoil. This standard does not cover semi intensive or intensive green roofing.


Subsector : B34 Registration Date : 2014-12-12Organization : SNCountry : Norway


ICS : 91.040.99National Ref : prNS 3720Title : Method for greenhouse gas calculations for buildingsScope : The standard shall define an unique method for calculations of emission gases (green house

gas) for buildings such as different models/tools which are used will be comparable.



Subsector B99: UNDETERMINED



ICS :National Ref : 32271Title : Byggritningar – RitningsnumreringScope : Denna standard redovisar principer och koder för numrering av ritningar som används i

bygg- och förvaltningsprocesserna. Den omfattar ritningar för husbyggnader med tillhörande

installationer, inredning och utrustning samt markarbeten. Standardens ramverk ger även utrymme för tillämpning inom anläggningsområdet. Ritningsnumreringen tjänar primärt för identifiering och särskiljande av enskilda dokument. Ritningsnumret skall därför vara unikt i det sammanhang numret används, vilket kan vara ett projekt eller en delprocess i bygg- och förvaltningsprocesserna. Identifieringsbehovet ställer inga krav på strukturerade beteckningar. Ritningsnumret tjänar även för sortering av utskrivna dokument likväl som datafiler. Därför innehåller numret koder som karakteriserar ritningen – dess typ och innehåll. Betydelsen av dessa koder skall vara uppenbar för en någorlunda rutinerad användare. Det medför kravet att kodernas komplexitet skall vara låg och att ritningsnumret skall innehålla ett begränsat antal tecken. Avsikten är inte att uttömmande beskriva ritningens egenskaper eller beteckna de objekt som ritningen representerar. För det ändamålet fordras mer sofistikerat stöd, till exempel elektronisk dokumenthantering.




ICS : 91.140.50National Ref : NEN 1010:2014 Concept nlTitle : Safety requirements for low-voltage installationsScope : NEN 1010 is the guideline for the installation, expansion and adaption of low-voltage

installations. The standard can also be used for controls and inspections of new projects.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2014-12-08Organization : AFNORCountry : France


ICS :National Ref : PR NF U 47-110Title : Animal health analysis methods - Emphasis of presumptive Taylorella equigenitalis by

immunofluorescence from Equidae genital sampling


Subsector : C01 Registration Date : 2014-12-03Organization : LSTCountry : Lithuania


ICS : 67.100.99National Ref :Title : Whey - General quality requirementsScope : This standard contains whey (excluding whey powder) from the production of cottage

cheese, cheese and casein general quality requirements.


Subsector : C01 Registration Date : 2014-12-22Organization : UNICountry : Italy


ICS : 03.040National Ref : U59009500Title : Non-regulated professions - Sensory Project Manager - Requirements of knowledge,

skills and competenceScope : The scope of this standard is to define the requirements of knowledge, skills and

competence of the Sensory Project Manager


Subsector : C01 Registration Date : 2014-12-19Organization : TSECountry : Turkey

Project ID : t1000979/0001 Project Established

ICS : 67.120.10National Ref :Title : Salami Scope : This standard specifies salam. Which is defined in clause 0.2.12 it does not cover. Salami

which is produced with chicken, turkey and poultry and camel meat.


Subsector : C01 Registration Date : 2014-12-19Organization : TSECountry : Turkey

Project ID : t2000980/0001 Project Established

ICS : 67.120.10National Ref :Title : Sausage Scope : This standard spcifies sausage. İt does not cover sausages which is conserved in brine or meat

which is not mentioned in clause 0.2.1.



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS : 87.040National Ref : DIN 55653Title : Paints and varnishes - Determiantion of settling




ICS : 27.120.01National Ref : DIN 53233Title : Paints and varnishes - Determination of abraison behaviour




ICS : 27.120.01

National Ref : DIN 53781Title : Coating materials - Methods for testing the resistance of coatings to ionizing radiation in

nuclear plants




ICS : 27.120.01National Ref : DIN 55991-1Title : Paints and varnishes - Coatings for nuclear facilities - Part 1: Requirements and test

methods




ICS : 27.120.01National Ref : DIN 55991-2Title : Paints and varnishes - Coatings for nuclear facilities - Part 2: Identity testing of coating

materials




ICS : 27.120.01National Ref : DIN 55991-3Title : Paints and varnishes - Coatings for nuclear facilities - Part 3: Coating work, planning and

procedure



Subsector C17: TREES AND PLANTS

Subsector : C17 Registration Date : 2014-12-10Organization : INSCountry : Moldova, Republic of Latest Date for Comments : 2015-02-10Project ID : MD000001/0001 Draft for public

enquiryICS : 65.020.20National Ref : SM 155Title : Nursery stock. Grafted trees of pome and stone species. Technical conditionsScope : Clasification, detection of quality technical requirements, determination of rules and

methods of assesment the quality, as well as conditions of packaging, labling, delivering, transport and storage of grafted trees of pome and stone species


Subsector : C17 Registration Date : 2014-12-10Organization : INSCountry : Moldova, Republic of Latest Date for Comments : 2015-02-10

Project ID : MD000002/0001 Draft for public enquiry

ICS : 65.020.20National Ref : SM 156Title : Nursery stock. Rootstocks for fruit trees. Technical conditionsScope : Clasification, detection of quality technical requirements, determination of rules and

methods of assesment the quality, as well as conditions of packaging, labling, delivering, transport and storage of fruit rootstocks culture




ICS : 65.020.20National Ref : SM 157Title : Nursery stock. Scionwood and graftwood of fruit cultures and bacciferous cultures

cuttings. Technical conditionsScope : Clasification, detection of quality technical requirements, determination of rules and

methods of assesment the quality, as well as conditions of packaging, labling, delivering, transport and storage of scionwood and graftwood of fruit cultures and bacciferous culture cuttings




ICS : 65.020.20National Ref : SM 313Title : Nursery stock. Almond nursery trees. Technical conditionsScope : Clasification, detection of quality technical requirements, determination of rules and

methods of assesment the quality, as well as conditions of packaging, labling, delivering,

transport and storage of almond nursery trees



Subsector C99: UNDETERMINED



ICS :National Ref : 06234658Title : Fuels for vegetable oil compatible combustion engines - Fuel from rapeseed oil -

Requirements and test methods




ICS :National Ref : 06234660Title : Fuels for vegetable oil compatible combustion engines - Fuel from vegetable oil -

Requirements and test methods



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 91.140.10National Ref : ÖNORM M 5930Title : Calculation of heating costsScope : This ÖNORM points to an objectively well-founded way to charge costs for heating and hot

water, taking into consideration the Heizkostenabrechnungsgesetz (HeizKG) about the efficient use of energy through consumption-based detection, measurement and distribution. It was in the interest of all parties to ensure the highest level of legal certainty and to provide users and consumers a viable, understandable and easy to use heating expenses.


Subsector : F05 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS : 17.040.30National Ref : DIN 2271Title : Geometrical product specifications (GPS) - Pneumatic length measurement -

Characeristics of instruments, requirements, testing



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2014-12-03Organization : NENCountry : Netherlands


ICS : 03.120.10, 35.240.80National Ref : NTA 7515:2014 Concept nlTitle : Conformity assessment - Requirements for bodies providing audits for certification of

information security management systems in healthcareScope : NTA 7515 gives requirements and guidelines for institutions which execute audits and

certifications of information security management systems in healthcare beside the requirements in ISO/IEC 17021:2011 and NEN 7510:2011. This technical agreement is primarily for the support of accreditation activities of institions performing ISMS-certifications.



Subsector F15: MATERIAL TESTING IN GENERAL



ICS :National Ref : 06234634Title : Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer

- Part 1: Viscometer specification and measurement procedure




ICS :National Ref : 06234635Title : Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer

- Part 4: Viscometer calibration and determination of the uncertainty of measurement




ICS :National Ref : 06234655Title : Atomic absorption spectrometry (AAS) - Vocabulary




ICS :National Ref : 06234665Title : Determination of linear thermal expansion of solids - Part 2: Testing of fired fine ceramic

materials using the dilatometer method




ICS :National Ref : 06234666Title : Determination of linear thermal expansion of solids - Part 3: Testing of non-fired fine

ceramic materials using the dilatometer method




ICS :National Ref : 06234670Title : Testing of materials for semiconductor technology - Methods for characterizing

photoresists - Part 1: Determination of coating thickness with optical methods



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2014-12-08Organization : AFNORCountry : France


ICS :National Ref : FD X50-300Title : Organisation and management of the industrial production - Industrial subcontracting -

Vocabulary.

Relatedness :National : REV/AMD FD X50-300:198711 (X50-300) :


** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2014-12-08Organization : AFNORCountry : France


ICS :National Ref : PR XP S54-215Title : Playground surfacing - HIC (Head Injury Criterion) test apparatus validation and

monitoring method



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS :National Ref : 04200900Title : Wood paving



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I03: LIMITS & FITS

Subsector : I03 Registration Date : 2014-12-22Organization : UNICountry : Italy

Project ID : 0203F140/0001 Project Established

ICS : 23.040.10National Ref : E0203F140Title : Penstocks - Assessment of integrity of in-service penstocksScope : The standard defines how to perform an assessment of integrity of in-service penstocks for

power production. The assessment deals with: a) Metallic components included for example more critical components and welded joints b) Civil engineering components (e.g. saddles, anchorings) c) Protective equipment and related components d) Geological framework (topographic survey of fixed components, land survey/mapping due to landslide and landfall) e) Reporting.



Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2014-12-12Organization : TSECountry : Turkey

Project ID : tst07739/0001 Project Established

ICS : 13.060.10National Ref :Title : Irrigation WaterScope : This standard applies to irrigation water used in the culture of vegetable production, such as

water of rivers, lakes, brooks, artesians, spring and other water sources. It does not apply water used for the purpose of drinking and commercial use.



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2014-12-18Organization : BSICountry : United Kingdom


ICS :National Ref : BS 4311-1:2007/COR 1Title : Gauge blocks manufactured to imperial specification. Part 1: Specification and

validation. Corrigendum

Relatedness :National : New

:

Subsector : I09 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS :National Ref : 12102605Title : Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank



Subsector I11: MACHINE TOOLS



ICS :National Ref : 03100976Title : Firefighting equipment - Portable generating set - Part 2: Portable generating set

<kleiner> 5 kVA



Subsector I18: MINING



ICS : 13.340.50National Ref : DIN 23311-2Title : Knee pads for mining - Part 2: Plastic knee pads




ICS :National Ref : 00802327Title : Shaft sinking - Pulleys for flat winding ropes - Safety requirements and testing



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2014-12-18Organization : BSICountry : United Kingdom


ICS :National Ref : BS 4094-1:1966 COR1Title : Recommendation for data on shielding from ionizing radiation. Shielding from

gamma radiation. Corrigendum



Subsector I32: FLANGES



ICS :National Ref : 08201179Title : Line blanks



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 23.040.10, 23.040.40National Ref : ÖNORM B 5640Title : Non-alloy steel tubes and fittings for drinking water supply pipelines with surface

protectionScope : This ÖNORM applies to non-alloy steel tubes and fittings for the drinking water supply

outside of buildings with inner and outer coatings or linings, respectively, and contains additional provisions to ÖNORM EN 10224 for fittings/components, surface protection and quality assurance.



Subsector M05: WELDING

Subsector : M05 Registration Date : 2014-12-22Organization : UNICountry : Italy


ICS : 25.160.10National Ref : U28001000Title : Manual Gas welding equipment - Periodic verification of equipmentScope : The standard provides guidelines for periodic testing of the manuals equipment for gas

welding, cutting and allied processes , connected downstream of the cylinder valve or, in case of centralized distribution, of the mobile equipments downstream of the point of use. The standard applies to equipment that use compressed gases up to 300 bar (30 MPa), dissolved acetylene, liquefied petroleum gas (LPG), methylacetylene mixtures -proadiene (MPS) and carbon dioxide (CO2) and their eventual mixtures.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2014-12-19Organization : TSECountry : Turkey


ICS : 85.060National Ref :Title : Corrugated boards-Weight of wax applied during curtain coating operationScope : This standard covers the determination of the weight of hot melt coating applied to

corrugated board by curtain coating for routine process control in the plant

Relatedness :National : NewInternational : Modified ASTM D 3708:2010


Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS : 81.060.10National Ref : DIN 54387-2Title : Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron

nitride, other metal borides and elemental boron - Part 2: Determination of total boron, soluble boron compounds, HNO<(Index)3>-soluble boron in B<(Index)4>C, H<(Index)2>O<(Index)2> soluble and insoluble fractions in amorphous boron and HF/HNO<(Index)3> insoluble fractions in titanium boride


Subsector : N04 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS : 81.060.10National Ref : DIN 54387-3Title : Testing of ceramic raw and basic materials - Chemical analysis of boron carbide, boron

nitride, other metal borides and elemental boron - Part 3: Determination of the non-metallic major and minor constituents total carbon, total oxygen and total nitrogen as well as of free carbon in B<(Index)4>C and of loss on drying of amorphus boron



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2014-12-22Organization : UNI

Country : Italy


ICS : 59.080.30National Ref : U95000570Title : Textiles - Raw silk - Classification, specifications and test methodsScope : This standard defines a classification system of the raw silk batches specifying the qualitative

assessment characteristics of batch of a raw silk yarn and the relevant test methods to determine these characteristics



Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2014-12-18Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8417:2011+A1:2014 COR1 CorrigendumTitle : Preservation of wood. Corrigendum



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 83.060National Ref : ÖNORM ISO 4649Title : Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a

rotating cylindrical drum device (ISO 4649:2010)Scope : This International Standard specifies two methods for the determination of the resistance of

rubber to abrasion by means of a rotating cylindrical drum device. The methods involve determination of the volume loss due to the abrasive action of rubbing a test piece over a specified grade of abrasive sheet. Method A is for a non-rotating test piece and method B for a rotating test piece. For each method, the result can be reported as a relative volume loss or an abrasion resistance index.


Subsector : N09 Registration Date : 2014-12-12Organization : TSECountry : Turkey


ICS :National Ref :Title : Pad, energy dissipator (for military use) Scope : This specification covers the performance and acceptance requirements for a pad which

dissipates the energy at impact of items that are airdropped

Relatedness :National : NewInternational : Modified STANAG 3929 ED.6:2011


Subsector N21: GASEOUS FUELS AND COMBUSTIBLE GAS

Subsector : N21 Registration Date : 2014-12-18Organization : ASROCountry : Romania


ICS : 75.060National Ref : SR 13406:2014Title : Natural Gas Odorization. General technical condition

Scope : This standard specifies general requirements for natural gas odorization.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 01.040.13, 13.060.01National Ref : ÖNORM ISO 6107-1Title : Water quality - Vocabulary - Part 1 (ISO 6107-1:2004) (multilingual version: de/en/fr/ru)Scope : The ÖNORM ISO 6107 consists of a series of nine parts, under the general title Water quality

- Vocabulary. And defines terms used in certain fields of water quality characterization. In addition to the terms and definitions in the three official ISO languages (English, French and Russian), this part of ISO 6107 gives the equivalent terms and their definitions in the German language. The definitions are not necessarily identical to those in standard scientific text books or dictionaries. These definitions have been formulated for technical purposes, as well as for the understanding and benefit of the non-expert in the field.




ICS : 01.040.13, 13.060.01National Ref : ÖNORM ISO 6107-3Title : Water quality - Vocabulary - Part 3 (ISO 6107-3:1993 + Amendment 1:2001) (multilingual

version: de/en/fr/ru)Scope : The ÖNORM ISO 6107 consists of a series of nine parts, under the general title Water quality






- Vocabulary. And defines terms used in certain fields of water quality characterization. In addition to the terms and definitions in the three official ISO languages (English, French and Russian), this part of ISO 6107 gives the equivalent terms and their definitions in the German language. The definitions are not necessarily identical to those in standard scientific text

books or dictionaries. These definitions have been formulated for technical purposes, as well as for the understanding and benefit of the non-expert in the field.














ICS : 01.040.13, 13.060.01National Ref : ÖNORM ISO 6107-7Title : Water quality - Vocabulary - Part 7 (ISO 6107-7:2006) (multilingual version: de/en/fr/ru)

Scope : The ÖNORM ISO 6107 consists of a series of nine parts, under the general title Water quality - Vocabulary. And defines terms used in certain fields of water quality characterization. In addition to the terms and definitions in the three official ISO languages (English, French and Russian), this part of ISO 6107 gives the equivalent terms and their definitions in the German language. The definitions are not necessarily identical to those in standard scientific text books or dictionaries. These definitions have been formulated for technical purposes, as well as for the understanding and benefit of the non-expert in the field.



Subsector S99: UNDETERMINED



ICS : 95.020National Ref : ONR 191391Title : Revolver and pistol cartridges - Dimensions and gas pressureScope : This ONR specifies the maximum dimensions for cartridges and the small dimensions of the

cartridge chamber as well as the maximum allowable gas pressure or the maximum energy of the cartridge, which must be complied with in the production of weapons and ammunition. Compliance with these values is examined during the testing of cartridges and weapon proof.




ICS : 95.020National Ref : ONR 191392-2Title : Rimless cartridges - Dimensions and gas pressure - Part 2: Calibres in inchesScope : This ONR specifies the maximum dimensions for cartridges and the small dimensions of the





ICS : 95.020National Ref : ONR 191393-1Title : Rimmed cartridges - Dimensions and gas pressure - Part 1: Metric calibresScope : This ONR specifies the maximum dimensions for cartridges and the small dimensions of the





ICS : 95.020National Ref : ONR 191392-1Title : Rimless cartridges - Dimensions and gas pressure - Part 1: Metric calibresScope : This ONR specifies the maximum dimensions for cartridges and the small dimensions of the





ICS : 95.020National Ref : ONR 191393-2Title : Rimmed cartridges - Dimensions and gas pressure - Part 2: Calibres in inchesScope : This ONR specifies the maximum dimensions for cartridges and the small dimensions of the



Subsector : S99 (Secondary Subsector)

Registration Date : 2014-12-03

Organization : NENCountry : Netherlands


ICS : 03.120.10, 35.240.80National Ref : NTA 7515:2014 Concept nlTitle : Conformity assessment - Requirements for bodies providing audits for certification of

information security management systems in healthcareScope : NTA 7515 gives requirements and guidelines for institutions which execute audits and

certifications of information security management systems in healthcare beside the requirements in ISO/IEC 17021:2011 and NEN 7510:2011. This technical agreement is primarily for the support of accreditation activities of institions performing ISMS-certifications.


Subsector : S99 Registration Date : 2014-12-03Organization : NENCountry : Netherlands


ICS :National Ref : NEN 5623:2014 Concept nlTitle : Radioactivity measurements - Determination of the activity of gamma ray emitting

nuclides in a counting sample by semiconductor gammaspectrometryScope : Describes a method for the determination of the activity of gamma ray emitting nuclides in

counting samples of different compoundings and sources.




ICS :National Ref : NEN 5694:2014 Concept nlTitle : Radioactivity measurements - Methods for radiochemical determination of polonium-210

(210Po) and lead-210 210Pb)Scope : This standard describes a method for the determination of activity concentration of

polonium-210 and lead-210 with alfa-spectrometry. This standard is applicable to organic, inorganic, silicon containing materials as well as deposition and watery solutions.




ICS :National Ref : NEN 5622:2014 Concept nlTitle : Radioactivity measurements - Determination of massic gross-alpha activity of a solid

counting sample by the thick source methodScope : The standard describes a method for the determination of the gross-beta activity of a solid

counting sample with a homogeneous activity distribution and in such manner areïeke mass that maximum self absorption is reach (thick source method). The standard is applicable of a solid counting sample of different origines.




ICS :National Ref : NEN 5627:2014 Concept nlTitle : Radioactivity measurements - Determination of massic gross-bèta activity and massic

rest-bèta-activity of a solid counting sampleScope : The standard describes a method for the determination of the specific gross-beta activity

and specific rest-beta-activity of a solid counting sample with a homogeneous activity distribution and a specified areïke mass. This standard is applicable of solid counting samples of different origins.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2014-12-11Organization : DINCountry : Germany


ICS : 47.060National Ref : DIN 80000Title : Inland navigation vessels - Safety role and safety plan for passenger vessels




ICS : 23.040.10National Ref : DIN 86009Title : Exhaust gas lines on ships - Steel tubes




ICS : 47.020.50National Ref : DIN 81850Title : Stud link anchor chain cables, grade K4 - End links; Text in German and English




ICS : 25.140.30National Ref : DIN 87310Title : Multi-purpose keys with inner square and flat ends


Subsector : T01 Registration Date : 2014-12-11Organization : DIN

Country : Germany


ICS : 25.140.30National Ref : DIN 87312Title : Flat-ended keys for deck screw caps for filling and sounding pipes



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2014-12-18Organization : BSICountry : United Kingdom


ICS :National Ref : BS 4A 114:1999+A2Title : Specification for corrosion-resisting steel, mushroom-headed, slotted-drive,

bolts, strength class 880 MPa. Amendment




ICS :National Ref : BS SP 22-27:1950+A3Title : BS Specification for B.A. Washers. For aircraft purposes (primarily

forinstrument use). Amendment




ICS :National Ref : BS 2SP 101-104:1956+A3Title : BS Specifications for Turnbarrels, tension rods and swaged

cable-end connections (Unified threads), cadmium plated, for aircraft. Amendment




ICS :National Ref : BS 4A 104:2002+A3Title : Specification for corrosion-resisting steel bolts (Unified hexagons

andUnified threads), strength class 880 MPa, for aircraft. Amendment




ICS :National Ref : BS 4T 45:1972+A2Title : Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mmoutside

diameter and greater) (weldable). Amendment




ICS :National Ref : BS 3SP 1:2013/Cor 1Title : Specification. Shackles, carbon steel, cadmium plated for aircraft.

Corrigendum




ICS :National Ref : BS SP 119-120:1957+A2:2012/Cor 1 CorrigendumTitle : Joints (Unified threads). For aircraft. Corrigendum


Subsector : T02 Registration Date : 2014-12-18Organization : BSI

Country : United Kingdom


ICS :National Ref : BS SP59 AND 60:1955+A1:2012/CorrigendumTitle : Specifications for Spring catches for aeronautical purposes.

Corrigendum



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2014-12-10Organization : LVS Draft Issue Date : 2014-12-12Country : Latvia Latest Date for Comments : 2015-01-15

Project ID : 00DG1006/0001 Draft for public enquiry

ICS : 43.020National Ref : LVS 63:2009/prA3Title : State revenue service, customs service vehicles, their painting and equipmentScope : Standard sets additional requirements for state revenue service cars and cars working in the

sphere of customs services

Relatedness :National : REV/AMD LVS 63 :


Project ID : 03100912/0001 Draft for public enquiry

ICS : 29.160.40National Ref : DIN 14660Title : Firefighting equipment - Personal protective devices 230 V/16 A and 400 V/16 A for

rescue teams


Subsector : T03 Registration Date : 2014-12-12Organization : TSECountry : Turkey


ICS : 43.060.30National Ref :Title : Road Vehicles-Rubber Tubes and Hoses-Internal Combustion Engine Cooling Systems

for Use On Passenger Cars and Light Commercial VehiclesScope : This standard covers rubber tebes and hoses for internal combustion engine cooling systems

for use on passenger cars and light commercial vehicles.

Relatedness :

National : NewInternational : Modified ISO 4081:2010



ICS : 43.040.40National Ref :Title : Road Vehicles-Pneumatic Braking Connections Between Motor Vehicles and Towed

Vehicles - İnterchangeabilityScope : This standard covers pneumatic braking connections between motor vehicles and towed

vehicles for road vehicles.

Relatedness :National : NewInternational : Modified ISO 1728:2006



ICS : 43.040.40National Ref :Title : Road Vehicles-Pneumatic Braking Connections Between Motor Vehicles and Towed

Vehicles - İnterchangeabilityScope : This standard covers pneumatic braking connections between motor vehicles and towed

vehicles for road vehicles.

Relatedness :National : NewInternational : Modified SAEJ 318:2013


Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2014-12-19Organization : ASICountry : Austria


ICS : 93.080.30National Ref : ÖNORM V 1318Title : Road traffic noise reducing devices - Specifications - Rules for the implementation of

ÖNORM EN 14388Scope : This ÖNORM defines parameters for which values shall be declared depending on the type

of road traffic noise reduction device. This ÖNORM supports the implementation of ÖNORM EN 14388 with which it shall be applied jointly.


Subsector : T19 Registration Date : 2014-12-04

Organization : BAS Draft Issue Date : 2013-10-09Country : Bosnia and Herzegovina Latest Date for Comments : 2013-12-09

Project ID : 00069326/0001 Published Standard

ICS : 93.080.30National Ref : BAS 1050:2014Title : Vertical road traffic signs - Technical requirementsScope : This standard specifies the general technical requirements for vertical road traffic signs, with

surfaces which may be made of regular materials (paint) or retroreflective material (reflection of light), as well as externally and internally illuminated signs.


Subsector : T19 Registration Date : 2014-12-04Organization : BAS Draft Issue Date : 2013-10-09Country : Bosnia and Herzegovina Latest Date for Comments : 2013-12-09


ICS : 93.080.30National Ref : BAS 1051:2014Title : Vertical road traffic signs - Danger warning signsScope : This standard defines the shape and dimensions of traffic signs - danger warning signs.




ICS : 93.080.30National Ref : BAS 1052:2014Title : Vertical road traffic signs - Prohibitory or restrictive signsScope : This standard defines the shape and dimensions of traffic signs - prohibitory or restrictive

signs




ICS : 93.080.30National Ref : BAS 1055:2014Title : Vertical road traffic signs - Additional panelsScope : This standard defines the shape and dimensions of additional panels for vertical traffic signs.

Relatedness :National : New

:



ICS : 93.080.30National Ref : BAS 1054:2014Title : Vertical road traffic signs - Advance direction road traffic signsScope : This standard defines the shape and dimensions of traffic signs - advance direction road

traffic signs.




ICS : 93.080.30National Ref : BAS 1053:2014Title : Vertical road traffic signs - Information signs Scope : This standard defines the shape and dimensions of traffic signs - informatory signs.


Subsector : T19 Registration Date : 2014-12-22Organization : UNICountry : Italy


ICS : 93.080.20National Ref : U71012490Title : Guideline for the definition of the technical-functional requirements of road marking worksScope : This Guideline is inspired by the need to frame in a single document the Italian and European

technical standards, which cover the performance of road markings, currently in force, which are contained in or may be included, together with the requirements related to mandatory standards, in particular specifications, procurement of public works which constitute the discipline of detail and technique. The document is developed in order to provide to anyone who works in road marking works a simple tool containing the right technical information to learn about the products on the market, understand how these are built up and which performances can give.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

Information procedure - ISS · 2015-01-16 · Information procedure Page 1 Monthly Notifications...

Documents

Transcript of Information procedure - ISS · 2015-01-16 · Information procedure Page 1 Monthly Notifications...