Monthly Notifications Register - IPQ · Monthly Notifications Register Notifications registered at...

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2014-05-01 to 2014-05-31

Register issued on : 2014-06-06

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2014-05-21Organization : TSECountry : TurkeyProject ID : tst09881/0001 Project EstablishedICS : 03.080.30, 43.020National Ref :Title : This standard includes, rules for vehicle parking placesScope : This standard includes rules for structural characteristics, operating, personal of rules for

vehicle parking places

Relatedness :National : New

Subsector : A99 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst13287/0001 Project EstablishedICS : 13.030.30National Ref :Title : Workplaces-Rules for providig services about cleaning drinkable or usable

waterstoragesScope : This standard includes rules for structural characteristics, operating, personal and technical

eguipment of providig services about cleaning drinkable or usable waterstorages


Subsector : A99 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst93686/0001 Project EstablishedICS : 13.030.50National Ref :Title : Workplaces-Rules for vegetable oil waste recycling facilitiesScope : This standard includes rules for structural characteristics, operating, personal, technical

eguipment and safety of vegetable oil waste recycling facilities


** End of Subsector **

** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401124/0001 Project EstablishedICS :National Ref : BS 9990Title : Code of practice for non-automatic firefighting systems in buildings


Subsector : B01 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401125/0001 Project EstablishedICS :National Ref : BS 9991Title : Fire safety in the design, management and use of residential buildings. Code of

practice


Subsector : B01 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 03100956/0001 Project EstablishedICS :National Ref : 03100956Title : Firefighting and rescue service vehicles - Part 2: Additional provisions to DIN EN 1846-2

and DIN EN 1846-3 (Proposal for an European Standard)


Subsector : B01 Registration Date : 2014-05-28Organization : UNMZ Draft Issue Date : 2014-05-31Country : Czech Republic Latest Date for Comments : 2014-06-30Project ID : 38001214/0001 Project EstablishedICS :National Ref :Title : Fire-fighting couplingsScope : The aim of the modification is unification of related Czech standards using new European

standards.

Relatedness :National : REV/AMD CSN 38 9427 (2003)

Subsector : B01 Registration Date : 2014-05-30Organization : UNI

Country : ItalyProject ID : 70001804/0001 Project EstablishedICS : 13.220.20National Ref : U70001804Title : Smoke and heat control systems - Part 4: Engineering methods for the design of smoke

and heat exhaust ventilation systemsScope : The technical specification concerns the smoke and heat exhaust ventilation systems

designed by means of performance based approach, to address the design of such systems in complex buildings and infrastructures, and/or when they are not within the scope of application of deterministic standards, where the engineering approach is considered appropriate. This standard is aimed at defining guidelines, limits and base parameters to be used for the design as well as the performance criteria to be verified by means of a performance based approach.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00517138/0001 Project EstablishedICS :National Ref : 00517138Title : Cladding for external walls - Part 1: Tiles fixed with mortar, principles of design and

application


Subsector : B02 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401224/0001 Project EstablishedICS :National Ref : BS 8081Title : Ground anchorages. Code of Practice


Subsector : B02 Registration Date : 2014-05-21Organization : SUTNCountry : SlovakiaProject ID : 73401214/0001 Project EstablishedICS : 91.040.99National Ref : STN 73 1605Title : Air-supported structures, structural design, construction and operationScope : Air-supported structures in terms of this standard are defined as structural works which

completely or partly dispose with a space defining outer layer made of a flexible cover, which is carried by air in the inner space set under overpressure via a blower. The aim of

Scope : this task is to adapt the DIN 4134 and the extension regarding the modern implementation in areas like gasholders, air-supported structures for advertisement etc.

Relatedness :National : REV/AMD DIN 4134:1983


Subsector B05: FIRE TESTS

Subsector : B05 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00516287/0001 Project EstablishedICS : 13.220.50National Ref : DIN 4102-4Title : Fire behaviour of building materials and building components - Part 4: Synopsis and

application of classified building materials, components and special components


Subsector : B05 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00517150/0001 Project EstablishedICS :National Ref : 00517150Title : Fire safety engineering - Part 1: Basic rules for its application



Subsector B07: GLASS

Subsector : B07 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst11445/0001 Project EstablishedICS : 37.020, 95.020National Ref :Title : Eyepiece (Lens Assembly)- For night vision gogglesScope : This standard covers eyepice (lens assembly)- for night vision goggles.

Relatedness :National : NewInternational : Modified MIL-PRF-49156B NOT1:2013


Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2014-05-13Organization : DIN

Country : GermanyProject ID : 00517035/0001 Project EstablishedICS :National Ref : 00517035Title : Thermal insulation for closed livestock buildings - Thermal insulation and ventilation

forced - Part 1: Principles for planning and design for closed ventilated livestock buildings



Subsector B12: MASONRY

Subsector : B12 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401367/0001 Project EstablishedICS :National Ref : BS 4551:2005 CorrigendumTitle : Mortar. Methods of test for mortar and screed. Chemical analysis and physical

testing. Corrigendum



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2014-05-08Organization : NENCountry : NetherlandsProject ID : 50001884/0001 Project EstablishedICS : 91.160.10National Ref : NEN 1891:2014 Concept nlTitle : lighting and luminance - Measurement and determination of luminance performance in

practiceScope : NEN 1891 gives procedures for the measurement of the lightning intensity, illuminance and

the diffuse reflection factors of surfaces. This standard gives specifications how to carry out the measurement assignment, the content of the measurement report and the necessary devies.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2014-05-29Organization : BSI Draft Issue Date : 2014-04-11Country : United Kingdom Latest Date for Comments : 2014-06-30Project ID : 01200042/0001 Draft for public enquiryICS :

National Ref : BS 7967Title : Guide for the use of electronic portable combustion gas analysers for

the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances. Amendment


Subsector : B25 Registration Date : 2014-05-08Organization : NENCountry : NetherlandsProject ID : 50001883/0001 Project EstablishedICS : 23.040.10National Ref : NEN 3656:2014 Concept nlTitle : Requirements forsubmarine pipeline systems in stealScope : NEN 3656 gives minimal requirements for the design, construction, use, management and

taking out of order of piping systems for the transportation of materials at sea. The scope of this standard applies to piping systems of Group I for the transportation of hazardous materials.


Subsector : B25 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst02170/0001 Project EstablishedICS : 23.040.10, 91.140.40, 91.140.60National Ref :Title : Rules for Laying Underground Water and Gas PipesScope : This standard specifies the rules for laying underground water and gas pipes (except natural

gas pipes).

Relatedness :National : NewEuropean : Not Equivalent to CP 2010-2:1970


Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2014-05-22Organization : ASRO Draft Issue Date : 2014-07-31Country : Romania Latest Date for Comments : 2014-09-30Project ID : 48392014/0001 Project EstablishedICS : 91.140.10National Ref : SR 4839:2014Title : Heating installations. Annual number of degrees-days Scope : This standard specifies the calculation of the annual number of degree-days for the period

of heating the building in over Romania

Relatedness :National : REV/AMD SR 4839:1997

Subsector : B31 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst02164/0001 Project EstablishedICS : 91.140.10National Ref :Title : Principles For the Prefaration of the Projects of the Central Heating SystemsScope : This standard covers principles for the prefaration of the projects of the central heating

systems.

Relatedness :National : NewEuropean : Not Equivalent to DIN V 4701-10:2003


systems.

Relatedness :National : NewEuropean : Not Equivalent to DIN V 4701-12:2004+B1:2008


systems.

Relatedness :National : NewInternational : Not Equivalent to ASHRAE Handbook:2013


systems.

Relatedness :National : NewInternational : Not Equivalent to ISO 2531:2009


Subsector B33: BUILDING DESIGN

Subsector : B33 Registration Date : 2014-05-07Organization : UNMZ Draft Issue Date : 2014-05-15Country : Czech Republic Latest Date for Comments : 2014-07-01Project ID : 73004414/0001 Project EstablishedICS :National Ref :Title : Filling StationScope : Sanitary, technical and technological requirements for designing filling stations and

requirements for their location are given in this standard. The aim of the revision is unification with national regulations.

Relatedness :National : REV/AMD Revision of ČSN 73 6060 (2006)

Subsector : B33 Registration Date : 2014-05-16Organization : IPQ Draft Issue Date : 2014-05-15Country : Portugal Latest Date for Comments : 2014-06-14Project ID : C1861401/0001 Draft for public enquiryICS : 03.080, 03.120.10, 11.020National Ref : prNP 4530Title : Senior citizen social care services management system - RequirementsScope : This standard is intended to contribute to the implementation of a management system of

social care services to elder people, as well as to improve the performance of social responses to the elderly in context: residential, home and community


Subsector : B33 Registration Date : 2014-05-16Organization : IPQ Draft Issue Date : 2014-05-15Country : Portugal Latest Date for Comments : 2014-06-14Project ID : C1861434/0001 Draft for public enquiryICS : 03.080, 03.120.10National Ref : prNP 4531Title : Social care and social monitoring response management system - RequirementsScope : This standard was developed to structure the answering service and social care services.

This standard contains a system for managing social service response and social support that allows an organization to develop and implement a policy, objectives and actions consistent, taking into account the legal, regulatory requirements and other requirements to which the organization subscribes



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2014-05-15Organization : SNV Draft Issue Date : 2014-05-13

Country : Switzerland Latest Date for Comments : 2014-06-24Project ID : CH140009/0001 Draft for public enquiryICS : 93.080.01National Ref : SN 641611Title : Concept Design of the cost structure of infrastructure assets

Relatedness :National : REV/AMD SN 641700 (1993)


** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2014-05-28Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-26Project ID : 00048596/0001 Draft for public enquiryICS : 67.200National Ref : naSRPS E.K1.020:2014Title : Crude sunflower oilScope : This standard specifies the characteristics for identification and quality requirements of raw

sunflower oil intended for production of refined edible vegetable oil, mixture edible refined vegetable oils and mixture edible vegetable oils.


Subsector : C01 Registration Date : 2014-05-28Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-26Project ID : 00048597/0001 Draft for public enquiryICS : 67.200National Ref : naSRPS E.K1.022:2014Title : Low erucic acid crude rapeseed oil Scope : This standard specifies the characteristics for identification and minimum quality

requirements of low erucic acid crude rapeseed oil intended for production of refined edible vegetable oil, mixture edible refined vegetable oils and mixture edible vegetable oils.


Subsector : C01 Registration Date : 2014-05-28Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-26Project ID : 00048598/0001 Draft for public enquiryICS : 67.200National Ref : naSRPS E.K1.025:2014Title : Degummed soybean oilScope : This standard specifies the characteristics for identification and quality requirements of

degummed soybean oil intended for the production of edible refined vegetable oil, mixture edible refined vegetable oils and mixture edible vegetable oil.


Subsector : C01 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 05701736/0001 Project EstablishedICS :National Ref : 05701736Title : Analysis of honey - Determination of saccharase activity - Part 1: Siegenthaler method

Relatedness :

National : New

Subsector : C01 Registration Date : 2014-05-12Organization : LST Draft Issue Date : 2014-05-03Country : Lithuania Latest Date for Comments : 2014-07-02Project ID : 10001647/0001 Project EstablishedICS : 67.160.10National Ref :Title : Ethyl alcohol and spirit drinks of agricultural origin. Routine methods of analysisScope : This standard specifies routine methods of analysis of ethyl alcohol and spirit drinks of

agricultural origin to be used in determining the: - concentration of ethyl alcohol; - filling completeness; - colour, clarity, taste, smell; - clarity of rectified ethyl alcohol; - general quantity of foreign organic matter; - quantity of aldehydes; - quantity of higher alcohols; - quantity of acids; - quantity of esters; - quantity of volatile basic nitrogen; - quantity of methyl alcohol; - fixed residue; - quantitative furfural; - grain brandy alkalinity; - general quantity of extract; - colour; - quantity of sugar; - iron.


Subsector : C01 Registration Date : 2014-05-12Organization : LST Draft Issue Date : 2014-05-03Country : Lithuania Latest Date for Comments : 2014-07-02Project ID : 10001648/0001 Project EstablishedICS : 67.160.10National Ref :Title : Wine and other fermented beverages. Routine methods of analysis Scope : This standard specifies routine methods of analysis of wine and other fermented beverages

to be used in determining the concentration of ethyl alcohol, quantities of sugar, sulphur dioxide, iron, filling completeness, carbon dioxide and colour.


Subsector : C01 Registration Date : 2014-05-20Organization : SNCountry : NorwayProject ID : NOT14003/0001 Published Standard

ICS : 67.120.10National Ref : prNS9443Title : Norwegian minke whale - Requirements on treatment, production and distribution of

meatScope : This standard specifies quality requirements on whaling of Norwegian minke (whale) and

further handling of whale meat for retailing. The standard provides quality citeria for whale meat, and requriements to handling and production of whale meat in all parts from catcher to distributor. The standard provides also requirements to production of blubber from minke


Subsector : C01 Registration Date : 2014-05-02Organization : TSECountry : TurkeyProject ID : t1003415/0001 Project EstablishedICS : 67.060National Ref :Title : CornScope : This standard comprise corn. It doesn't comprise the corn mentioned seed in the

document.


Subsector : C01 Registration Date : 2014-05-02Organization : TSECountry : TurkeyProject ID : t2000353/0001 Project EstablishedICS : 67.120.30National Ref :Title : Canned fishScope : This standard, covers canned fish. This standard does not specify salted, smoked and

deepfrozen fish.


Subsector : C01 Registration Date : 2014-05-02Organization : TSECountry : TurkeyProject ID : t2007359/0001 Project EstablishedICS : 67.120.10National Ref :Title : Canned meat Scope : This standard, cavers canned meat


Subsector : C01 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst09267/0001 Project EstablishedICS : 67.120.10National Ref :Title : Offal- Edible- Rules for Refrigerating, Freezing, Conservating, Transporting and

DerostingScope : This standard applies to rules of edible offal for refrigerating, freezing, conservating,

transporting and derosting


Subsector : C01 Registration Date : 2014-05-02Organization : TSECountry : TurkeyProject ID : tst10052/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Lamb Starter FeedScope : This standard applies to lamb starter feeds. It does not apply to the other kind of lamb

feeds.



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2014-05-23Organization : UNMZ Draft Issue Date : 2014-06-30Country : Czech Republic Latest Date for Comments : 2014-08-30Project ID : 65001214/0001 Project EstablishedICS : 75.160.10, 75.160.20National Ref : CSN DIN 51900-3Title : Testing of solid and liquid fuels - Determination of gross calorific value by the bomb

calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket Scope : This standard specifies a method of determination the gross calorific value using an

adiabatic bomb calorimeter and of calculating the net calorific value of solid and liquid fuels.

Relatedness :National : NewEuropean : Identical to DIN 51900-3


calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods

Scope : This standard specifies a method of determination the gross calorific value of solid and liquid fuels using a bomb calorimeter and of calculating the net calorific value.



calorimeter and calculation of net calorific value - Part 2: Method using isoperibol or static-jacket calorimeter

Scope : This standard specifies a method of determination the gross calorific value of solid and liquid fuels using an isoperibol or static-jacket calorimeter and of calculating the net calorific value.



Subsector C19: CHEMICAL ANALYSIS

Subsector : C19 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 06234311/0001 Project EstablishedICS : 01.040.71National Ref : DIN 51418-2Title : X-ray spectrometry - X-ray emission and X-ray fluorescence analysis (XRF) - Part 2:

Definitions and basic principles for measurements, calibration and evaluation of results



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 06234500/0001 Project EstablishedICS :National Ref : 06234500Title : Rheometry - Measurement of rheological properties using rotational rheometers - Part 4:

Oscillatory rheology



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2014-05-30Organization : UNICountry : ItalyProject ID : 14D20060/0001 Project EstablishedICS : 35.080National Ref : E14D20060Title : Guidance to clinical software and network management in healthcare-related contexts -

Part 1: Software managementScope : Define essential guidelines for the correct implementation by healthcare enterprises of

both technical norms regarding software used in clinical contexts and published by SDO’s and applicable legislation (European directives and Italian laws).



Subsector F16: GRAPHICAL SYMBOLS

Subsector : F16 Registration Date : 2014-05-26Organization : SUTNCountry : SlovakiaProject ID : 01403014/0001 Project EstablishedICS : 01.080, 43.150National Ref : STN 01 8028Title : Cyclo-touristic marking Scope : The revision of the standard sets out basic requirements for the marking of the shapes,

dimensions, colours, design and ways of using of cyclo-tourists marking, cyclo-tourists trails and routes according to national and international rules.

Relatedness :National : REV/AMD STN 01 8028:2000


Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2014-05-29Organization : BSI Draft Issue Date : 2014-04-23Country : United Kingdom Latest Date for Comments : 2014-06-30Project ID : 01301192/0001 Draft for public enquiryICS :National Ref : BS 8583Title : Biodiversity. Guidance for businesses on managing the risks and

opportunities



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2014-05-08Organization : NENCountry : NetherlandsProject ID : 50001885/0001 Project EstablishedICS : 03.120.10National Ref : NPR 9036:2014 Concept nlTitle : Guidance for the integration of SR due diligence in an excisting management systemScope : NPR 9036 provides organizations (and primarily companies) guidance for the integration of

SR Due Diligence in their existing management system. In this way they can take their social responsiblity and also avoid violations of human and labor rights.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2014-05-29Organization : BSI Draft Issue Date : 2014-05-20Country : United Kingdom Latest Date for Comments : 2014-07-31Project ID : 01301275/0001 Draft for public enquiryICS :National Ref : BS 4190Title : ISO metric black hexagon bolts, screws and nuts. Specification


Subsector : I02 Registration Date : 2014-05-21Organization : TSECountry : TurkeyProject ID : tst00082/0001 Project EstablishedICS : 25.100.50National Ref :Title : For general purposes screwing tapsScope : This standard specifies screwing taps for general purposes

Relatedness :National : NewEuropean : Modified DIN 2181:2003


Relatedness :National : NewEuropean : Modified DIN 2184-1:2003



Subsector : I02 Registration Date : 2014-05-21Organization : TSECountry : Turkey

Project ID : tst00082/0001 Project EstablishedICS : 25.100.50National Ref :Title : For general purposes screwing tapsScope : This standard specifies screwing taps for general purposes








Subsector : I02 Registration Date : 2014-05-21Organization : TSECountry : TurkeyProject ID : tst00082/0001 Project EstablishedICS : 25.100.50National Ref :

Title : For general purposes screwing tapsScope : This standard specifies screwing taps for general purposes




Subsector : I02 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst04069/0003 Project EstablishedICS : 21.060.20National Ref :Title : Nuts With Holes MetricScope : This standard covers nuts with holes metric





Relatedness :

National : NewEuropean : Modified DIN 548:2006









Subsector : I02 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst079-1/0001 Project EstablishedICS : 21.060.30National Ref :Title : Washers – Part 1: General specificationScope : This standard specifies general specifications for washers


Subsector : I02 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst079-5/0001 Project EstablishedICS : 21.060.30National Ref :Title : Washers – Part 5: Spring washersScope : This standard specifies requirements for spring washers .

It does not cover washers made from nonmetal material and special form washers and washers used in aviation.







Relatedness :

National : NewEuropean : Modified DIN 6796:2009




Subsector : I02 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst079-8/0001 Project EstablishedICS : 21.060.30National Ref :Title : Washers – Part 8: Sealing washersScope : This standard specifies requirements for sealing washers .

NOTE Such washers are used for sealing holes in castings or other processes or as oil seals in engine blocks. It does not cover washers made from nonmetal material and special form washers and washers used in aviation.



Subsector I05: IRON PIPES

Subsector : I05 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00300591/0001 Project EstablishedICS :National Ref : 00300591Title : Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions,

materials



Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2014-05-30Organization : UNI

Country : ItalyProject ID : 0203B44B/0001 Project EstablishedICS : 23.020.30National Ref : E0203B44BTitle : Pressure equipment - Putting into service and use of pressure equipment and

assemblies - Assessment procedure of the service and use of pressure equipment and assemblies under fatigue

Scope : The technical specification provides the assessment procedure of the service and use of pressure equipment and assemblies, or components, under thermic and/or mechanic fatigue.



Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 02001010/0001 Project EstablishedICS :National Ref : 02001010Title : Garden tools - Non-motorized tools for using in soil - Digging fork


Subsector : I08 Registration Date : 2014-05-23Organization : TSECountry : TurkeyProject ID : tst06424/0001 Project EstablishedICS : 65.060.30National Ref :Title : Test Methods for Precision DrillsScope : This standard applies to precision drill test methods.


Subsector : I08 Registration Date : 2014-05-23Organization : TSECountry : TurkeyProject ID : tst06425/0001 Project EstablishedICS : 65.060.30National Ref :Title : Test Methods Seed Drills for In LinesScope : This standard applies to seed drills in lines test methods.



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 12102477/0001 Project EstablishedICS :National Ref : 12102477Title : Screwing taps - Technical delivery conditions for ground high-speed steel taps


Subsector : I09 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 12102478/0001 Project EstablishedICS :National Ref : 12102478Title : Screwing taps - Technical delivery conditions for ground high-speed steel taps


Subsector : I09 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst11064/0001 Project EstablishedICS : 25.140.30National Ref :Title : Hand tools-Pliers and nippers-NomenclatureScope : This Standard, pliers and nippers them with the Turkish nomenclature in English, French

and German counterparts is concerned.

Relatedness :National : NewInternational : Modified ISO 5742:2004


Subsector I18: MINING

Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802270/0001 Project EstablishedICS : 01.040.73National Ref : DIN 22005-2Title : Investigations of the raw material in hard-coal-mining - Part 2: Terms relating to raw

material


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802293/0001 Project EstablishedICS :National Ref : 00802293Title : Mine support - Part 1: General view


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802294/0001 Project EstablishedICS :National Ref : 00802294Title : Mine support - Part 2: Measurement and identification codes


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802295/0001 Project EstablishedICS :National Ref : 00802295Title : Mine support - Part 3: Requirements


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802296/0001 Project EstablishedICS :National Ref : 00802296Title : Mine support - Part 4: Testing


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802297/0001 Project EstablishedICS :National Ref : 00802297Title : Mine support - Part 5: Marking of parts of mine support


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802298/0001 Project EstablishedICS :National Ref : 00802298Title : Underground mine railways; track gauges and rails; standard types and selection


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802299/0001 Project EstablishedICS :National Ref : 00802299Title : Conveyor belts with textile plies for coalmining - Part 6: Testing


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802300/0001 Project EstablishedICS :National Ref : 00802300Title : Pit railways; rails S 30, butt strap Fl 30


Subsector : I18 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802317/0001 Project EstablishedICS :National Ref : 00802317Title : Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1:

Construction, commissioning and monitoring


Subsector : I18 Registration Date : 2014-05-13Organization : DIN

Country : GermanyProject ID : 00802320/0001 Project EstablishedICS :National Ref : 00802320Title : Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 4:

Hoisting winch brakes



Slewing brakes and overload protecting devices



Examination of ropes and rope end fittings



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00168051/0001 Project EstablishedICS :National Ref : PR NF A89-410Title : Solderability and brazeability definition and use of a testpiece with variable gap


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175012/0001 Project EstablishedICS :National Ref : PR NF X50-783Title : Accessibility - Disability-friendly establishments - Requirements and recommandations

for taking disabilities into account within establishments

Relatedness :National : REV/AMD NF X50-783:201009 (X50-783)

Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175013/0001 Project EstablishedICS :National Ref : PR NF S52-002Title : Light motorized vehicles - Hire karts - Safety requirements


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175201/0001 Project EstablishedICS :National Ref : PR NF E67-010Title : Additive manufacturing Powders Technical specifications

Relatedness :National : REV/AMD XP E67-010:201205 (E67-010)

Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175252/0001 Project EstablishedICS :National Ref : PR NF X06-039-3Title : Statistical techniques and methodology for use in validation of measurement methods

and assays Part 3 : qualitative measurements and assays


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175254/0001 Project EstablishedICS :National Ref : PR NF X06-039-1

Title : Statistical techniques and methodology for use in validation of measurement methods and assays - Part 1 : general principles and definitions


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175259/0001 Project EstablishedICS :National Ref : PR NF X06-039-2Title : Statistical techniques and methodology for use in validation of measurement methods

and assays - Part 2 : quantitative measurements and assays


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175795/0001 Project EstablishedICS :National Ref : PR NF X60-000Title : Maintenance - Maintenance function


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00175993/0001 Project EstablishedICS :National Ref : PR NF X30-440Title : Waste - Silicate glass - Test for determination of the immediatly soluble fraction in

contact with acetic at pH 5


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00176084/0001 Project EstablishedICS :National Ref : PR NF T72-282Title : Methods of steam disinfection of surfaces - Determination of bactericidal, fongicidal,

sporicidal and virucidal activity including bacteriophages


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00176255/0001 Project EstablishedICS :National Ref : PR NF L17-168Title : Aerospace series - Fluorocarbon rubbers - Class 68 - Characteristics


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00176301/0001 Project EstablishedICS :National Ref : PR NF E85-211Title : Portable ladders with integrated working platform


Subsector : I19 Registration Date : 2014-05-02Organization : AFNORCountry : FranceProject ID : 00176310/0001 Project EstablishedICS :National Ref : PR XP P18-467Title : Determination of fibre of density less than 1 of fresh concrete or mortar



Subsector I27: EARTH MOVING AND CONSTRUCTION EQUIPMENT


Calculation principles



Subsector I31: VALVES

Subsector : I31 Registration Date : 2014-05-13

Organization : DINCountry : GermanyProject ID : 00300588/0001 Project EstablishedICS :National Ref : 00300588Title : Fittings of stainless steel for the aseptic, chemical and pharmaceutical industry - Part 1:

Aseptic screwed pipe connection, standard type


Subsector : I31 Registration Date : 2014-05-21Organization : TSECountry : TurkeyProject ID : tst09809/0001 Project EstablishedICS : 23.060.10, 75.200National Ref :Title : Ball Valves For Combustible Gases For Distribution (except pipeline transportation) (for

natural gas and liquified petroleum gas "LPG")-Nominal Diameter (DN) From 65 mm up to 500 mm (included)

Scope : This standard covers ball valves for combustible gases for distribution (except for use on pipeline transportation) which are used for natural gas and liquified petroleum gas "LPG" and which have nominal diameter (DN) from 65 mm up to 500 mm (included)

Relatedness :National : NewEuropean : Not Equivalent to DIN 3230-5:2013

Subsector : I31 Registration Date : 2014-05-21Organization : TSECountry : TurkeyProject ID : tst09809/0001 Project EstablishedICS : 23.060.10, 75.200National Ref :Title : Ball Valves For Combustible Gases For Distribution (except pipeline transportation) (for

natural gas and liquified petroleum gas "LPG")-Nominal Diameter (DN) From 65 mm up to 500 mm (included)

Scope : This standard covers ball valves for combustible gases for distribution (except for use on pipeline transportation) which are used for natural gas and liquified petroleum gas "LPG" and which have nominal diameter (DN) from 65 mm up to 500 mm (included)

Relatedness :National : NewEuropean : Not Equivalent to DIN ISO 3302-1:1999


Subsector I34: NON-FERROUS METALLIC PIPES

Subsector : I34 (Secondary Subsector) Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst02170/0001 Project EstablishedICS : 23.040.10, 91.140.40, 91.140.60National Ref :Title : Rules for Laying Underground Water and Gas Pipes

Scope : This standard specifies the rules for laying underground water and gas pipes (except natural gas pipes).



Subsector I40: INDUSTRIAL PIPING NETWORKS

Subsector : I40 (Secondary Subsector)

Registration Date : 2014-05-08

Organization : NENCountry : NetherlandsProject ID : 50001883/0001 Project EstablishedICS : 23.040.10National Ref : NEN 3656:2014 Concept nlTitle : Requirements forsubmarine pipeline systems in stealScope : NEN 3656 gives minimal requirements for the design, construction, use, management and




Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2014-05-30Organization : UNICountry : ItalyProject ID : 0209E590/0001 Project EstablishedICS : 75.160.30National Ref : E0209E590Title : Plants for the production and the use of gas based on ligno-cellulosic biomass

gasification - Classification, essential requirements, guidelines for construction, trade offer, final order, acceptance tests of the plants

Scope : This standard describes the classification, the guidelines and requisites for construction, the trade offer, final order and acceptance tests of the plants for the production and the use of gas based on ligno-cellulosic biomass gasification for the production, on site, of electricity and/or heat.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00802319/0001 Project EstablishedICS :National Ref : 00802319Title : Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3:

Execution of steel structures


Subsector : M01 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401353/0001 Project EstablishedICS :National Ref : BS 6744Title : Stainless steel bars for the reinforcement of and use in concrete.Requirements

and test methods


Subsector : M01 (Secondary Subsector)

Registration Date : 2014-05-08

Organization : NENCountry : NetherlandsProject ID : 50001883/0001 Project EstablishedICS : 23.040.10National Ref : NEN 3656:2014 Concept nlTitle : Requirements forsubmarine pipeline systems in stealScope : NEN 3656 gives minimal requirements for the design, construction, use, management and




Subsector M16: MECHANICAL TESTS FOR METALS

Subsector : M16 Registration Date : 2014-05-29Organization : BSI Draft Issue Date : 2014-05-27Country : United Kingdom Latest Date for Comments : 2014-07-31Project ID : 01100692/0001 Draft for public enquiryICS :National Ref : BS 8571Title : Method of test for determination of fracture toughness in metallic

materials using single edge notched tension (SENT) specimens



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2014-05-19Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-19Project ID : 00048608/0001 Draft for public enquiryICS : 75.080National Ref : SRPS B.H8.001:2014Title : Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and

Rateometric ColorimetryScope : This test method covers the determination of sulfur in petroleum products in the range

from 0.02 to 10.00 mg/kg. This test method may be extended to higher concentration by dilution. This test method is аpplicable to liquids whose boiling points are between 30 and 371°C (86 and 700°F). Materials that can be analyzed include naphtha, kerosine, alcohol, steam condensate, various distillates, jet fuel, benzene, and toluene. The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Relatedness :National : NewInternational : Identical to ASTM D4045-04(2010)

Subsector : N03 Registration Date : 2014-05-19Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-19Project ID : 00048609/0001 Draft for public enquiryICS : 75.160.20National Ref : SRPS B.H8.003:2014Title : Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends

(Dry Method)Scope : This test method covers and is applicable to gasolines and gasoline-oxygenate blends with a

vapor pressure range from 35 to 100 kPa (5 to 15 psi). This test method, a modification of Test Method D323 (Reid Method), provides two procedures to determine the vapor pressure of gasoline and gasoline-oxygenate blends. NOTE 1—Because the external atmospheric pressure is counteracted by the atmospheric pressure initially present in the air chamber, this vapor pressure is an absolute pressure at 37.8°C (100°F) in kilopascals. This vapor pressure differs from the true vapor pressure of the sample due to some small vaporization of the sample and air in the confined space. NOTE 2—Vapor pressure of gasoline or gasoline-oxygenate blends below 35 kPa (5 psi) or greater than 100 kPa (15 psi) can be determined with this test method. For materials with a vapor pressure greater than 100 kPa (15 psi), use a 0 to 200 kPa (0 to 30 psi) gauge as specified in the annex of D323. Some gasoline-oxygenate blends may show a haze when cooled to 0 to 1°C. The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


Subsector : N03 Registration Date : 2014-05-19

Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-19

Project ID : 00048610/0001Draft for public

enquiryICS : 71.080.60National Ref : SRPS B.H8.004:2014Title : Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas

ChromatographyScope : This test method covers the determination of the purity of methyl tert-butyl ether (MTBE)

by gas chromatography. It also provides a procedure to measure impurities in MTBE such as C4 to C12 olefins, methyl, isopropyl and tert-butyl alcohols, methyl sec-butyl and methyl tert-amyl ethers, acetone, and methyl ethyl ketone. Impurities are determined to a minimum concentration of 0.02 mass %. This test method is not applicable to the determination of MTBE in gasoline. Water cannot be determined by this test method and must be measured by a procedure such as D1364. This test method is inappropriate for impurities that boil at temperatures higher than 180°C or for impurities that cause poor or no response in a flame ionization detector, such as water. The values stated in SI (metric) units of measurement are preferred and used throughout the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


Subsector : N03 Registration Date : 2014-05-19Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-19Project ID : 00048611/0001 Draft for public enquiryICS : 71.080.60National Ref : SRPS B.H8.007:2014Title : Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas

ChromatographyScope : This test method covers the determination of the purity of ethyl tert-butyl ether (ETBE) by

gas chromatography. It also provides a procedure to measure impurities in ETBE such as C4 to C12 olefins, methyl, isopropyl and tert-butyl alcohols, methyl sec-butyl and methyl tert-amyl ethers, acetone, and methyl ethyl ketone. This test method is not applicable to the determination of ETBE in gasoline. Water cannot be determined by this test method and shall be measured by a procedure such as D6304. This test method is inappropriate for impurities that boil at temperatures higher than 180°C or for impurities that cause poor or no response in a flame ionization detector, such as water. The values stated in SI units of measurement are preferred and used throughout the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Relatedness :National : NewInternational : Identical to ASTM D7796-12

Subsector : N03 Registration Date : 2014-05-16Organization : SIS Draft Issue Date : 2014-05-16Country : Sweden Latest Date for Comments : 2014-07-16Project ID : 00155137/0001 Project Established

ICS : 75.080National Ref : 155137Title : Petroleum products – Gas turbine fuels – Determination of sticking temperature of ashScope : This standard specifies a method for the determination of the sticking tempera-ture of ash

from gas turbine fuels. The sticking temperature is normally the same as the initial melting point and provides information on the risk of getting high temperature corrosion. The data provided by the test procedure can also be used to calculate the ash content of the fuel sample at 525 °C.


Subsector : N03 Registration Date : 2014-05-02Organization : TSECountry : TurkeyProject ID : tst06836/0001 Project EstablishedICS : 75.100National Ref :Title : Basic calibration of master viscometers and viscosity oil standards Scope : This standard covers the calibration of master viscometers and viscosity oil standards.

Relatedness :National : NewInternational : Modified ASTM D 2162:2013

Subsector : N03 Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst10650/0001 Project EstablishedICS : 75.100National Ref :Title : General purpose, preservative, lubricating oil (VV-L-800) (For military use)Scope : This standard covers the general purpose, preservative, lubricating oil (VV-L-800) for

military use.

Relatedness :National : NewInternational : Modified MIL-PRF-32033 (Amendment 2) NOT1:2011


Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2014-05-13Organization : TSECountry : TurkeyProject ID : t1011680/0001 Project EstablishedICS : 59.080.30National Ref :Title : Textiles- Curtain (Drapery) Fabrics Lace,Wowen and KnittedScope : This performance specification covers the requirements for all knit, lace, foam back stitch

bonded and sheen woven fabrics to be used in the manufacture of curtains and drapories.


International : Modified ASTM D3691:2009

Subsector : N05 Registration Date : 2014-05-21Organization : TSECountry : TurkeyProject ID : t1011988/0001 Project EstablishedICS : 59.080.60National Ref :Title : Textile floor coverings - Machine made carpetsScope : This Standard covers the spesifications and definition classification, sampling and testing of

machine carpets which is a sub category of textile floor coverings.

Relatedness :National : NewInternational : Modified SASO 1167:1998


Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2014-05-20Organization : ASICountry : AustriaProject ID : 00026154/0001 Project EstablishedICS : 91.120National Ref : ÖNORM B 3802-1Title : Protection of timber used in buildings - Part 1: GeneralScope : This ÖNORM regulates the basic conditions for the protection of timber components in the

construction industry from the adverse effects of the supporting function or destruction by organisms. It contains the grounds of protection of human health and environment, the obligation to consider structural measures and to reduce the chemical wood protection measures to the necessary degree.


Subsector : N07 Registration Date : 2014-05-20Organization : ASICountry : AustriaProject ID : 00026155/0001 Project EstablishedICS : 91.120National Ref : ÖNORM B 3802-2Title : Protection of timber used in buildings - Part 2: Constructional protection of timberScope : This standard describes preventive structural measures for the protection of wooden

constructions from damage by wood-destroying fungi or insects. Requirements are described to avoid strong swelling and shrinking due to high moisture which are not suitable for the timber construction.


Subsector : N07 Registration Date : 2014-05-20Organization : ASICountry : Austria

Project ID : 00026156/0001 Project EstablishedICS : 91.120National Ref : ÖNORM B 3802-3Title : Protection of timber used in buildings - Part 3: Chemical protection of timberScope : This ÖNORM regulates all preventive effective measures relating to the use of wood

preservatives.


Subsector : N07 Registration Date : 2014-05-20Organization : ASICountry : AustriaProject ID : 00026157/0001 Project EstablishedICS : 91.120National Ref : ÖNORM B 3802-4Title : Protection of timber used in buildings - Part 4: Control measures against fungal decay

and insect attack and remediation measuresScope : This ÖNORM specifies requirements that must be observed in the control and remediation

of an existing infestation by wood-destroying fungi or insects.



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 05401553/0001 Project EstablishedICS :National Ref : 05401553Title : Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings;

general quality requirements and testing



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2014-05-20Organization : SNCountry : NorwayProject ID : NOT14001/0001 Published StandardICS : 11.140National Ref : prNS 3371Title : Health service - Unisex Operating Theater Smock (Scrub suit)Scope : The standard gives requirement for unisex theater smocks (scrub suits) for use in the health

care services. It is the same models for females and males.



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 09500399/0001 Project EstablishedICS :National Ref : 09500399Title : Workplace atmospheres - Routine methods for the determination of the dustiness of

bulk materials - Part 1: Basics


Subsector : S08 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 09500400/0001 Project EstablishedICS :National Ref : 09500400Title : Workplaces atmospheres - Routine methods for the determination of dustiness of bulk

materials - Part 3: Dust production in still air


Subsector : S08 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 09500401/0001 Project EstablishedICS :National Ref : 09500401Title : Workplaces atmospheres - Routine methods for the determination of dustiness of bulk

materials - Part 4: Repeated drop in the cross-flow



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00300589/0001 Project EstablishedICS :National Ref : 00300589Title : Stainless steel fittings for the aseptic, chemical and pharmaceutical industries - Part 2:

Aseptic flanged pipe connection, standard type


Subsector : S09 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 00300590/0001 Project EstablishedICS :National Ref : 00300590Title : Stainless steel fittings for the aseptic, chemical and pharmaceutical industries - Part 3:

Aseptic clamp pipe connection, standard type


Subsector : S09 (Secondary Subsector) Registration Date : 2014-05-09Organization : TSECountry : TurkeyProject ID : tst02170/0001 Project EstablishedICS : 23.040.10, 91.140.40, 91.140.60National Ref :Title : Rules for Laying Underground Water and Gas PipesScope : This standard specifies the rules for laying underground water and gas pipes (except natural

gas pipes).



Subsector S16: AIDS FOR THE DISABLED

Subsector : S16 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 06301614/0001 Project EstablishedICS : 11.180.30National Ref : DIN 32981Title : Special devices for blind and partially sighted persons on traffic signals - Requirements



Subsector S17: RESPIRATORY PROTECTIVE DEVICES

Subsector : S17 Registration Date : 2014-05-30Organization : UNICountry : ItalyProject ID : 5002C280/0001 Project EstablishedICS : 13.340.30National Ref : U5002C280Title : Guidelines for selection and use of respiratory protective devicesScope : The standard is intended for those selecting and using respiratory protective devices for

work and rescue purposes.



Subsector S26: ENVIRONMENTAL MANAGEMENT

Subsector : S26 Registration Date : 2014-05-16Organization : IPQ Draft Issue Date : 2014-05-15Country : Portugal Latest Date for Comments : 2014-06-15Project ID : C0461462/0001 Draft for public enquiryICS : 13.220.10, 65.020.99National Ref : prNP 4413:2012/prEmenda 1:2014Title : Fire safety - Maintenance of fire extinguishersScope : This standard applies to companies operating in the maintenance of fire extinguishers and

defines the certification requirements of the fire extinguishers maintenance service. To maintain fire extinguishers, companies must have the certification of such service and register in the National Authority for Civil Protection (ANPC). The inspection of fire extinguishers is covered by this standard only when it is made by the maintenance company, on client’s request. This standard has the following objectives: a) Respond to the legal requirement stablished in paragraph 9 of Article 8. of Annex I of Decree No. 1532/2008 and to Decree No. 773/2009; b) Respond to the legal requirement established in Article 13 of Decree-Law No. 56/2011; c) Establish a benchmark certification service based on a recognized set of requirements and ensure their periodic verification through audits carried out by a certification body; d) Define the requirements that enable service providers to offer their customers adequate solutions to meet their needs, while allowing the client to select his supplier on a specified criteria base; e)Provide a way for companies to demonstrate that they have technical competence to perform the maintenance of fire extinguishers; f) Ensure the various players in the fire safety market (eg, safety managers, insurers, supervisory bodies, among others) that companies complying with this standard are governed by a set of recognized requirements; g) Encourage the continuous improvement of service through the development of competence and quality.



Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS

Subsector : S27 Registration Date : 2014-05-27Organization : ISSCountry : Serbia Latest Date for Comments : 2014-07-23Project ID : 00042025/0001 Draft for public enquiryICS : 13.030.01National Ref : SRPS B.E0.001Title : Waste glass - Cullet - Classification, designation and storage of culletScope : This standard specified classification, designation and storage of cullet, generated as

production scrap only at the location of production as well as waste glass (cullet) after using glass products



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 08000266/0001 Project EstablishedICS :National Ref : 08000266Title : Image quality assurance in diagnostic X-ray departments - Part 15: RöV constancy

testing of X-ray installations for dental radiographic equipment for digital cone-beam computed tomography



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401181/0001 Project EstablishedICS :National Ref : BS 6349-5Title : Maritime works. Part 5: Code of practice for dredging and land reclamation


Subsector : T01 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 13202555/0001 Project EstablishedICS :National Ref : 13202555Title : Visual display performance marine technology - Part 1: Selection of colours, association

of colours, principles of design


Subsector : T01 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 13202556/0001 Project EstablishedICS :National Ref : 13202556Title : Visual display performance marine technology - Part 2: Graphical symbols


Subsector : T01 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 13202557/0001 Project EstablishedICS :National Ref : 13202557Title : Visual display performance-marine technology - Part 3: Working conditions, alarms,

acknowledgements



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2014-05-29

Organization : BSICountry : United KingdomProject ID : 01401419/0001 Project EstablishedICS :National Ref : BS SP 41-46:1951+A5:2012 CorrigendumTitle : Specifications for tab washers for B.A. and B.S.W. hexagons for aircraft.

Corrigendum


Subsector : T02 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401420/0001 Project EstablishedICS :National Ref : BS SP 107-112:1954+A5:2012 CorrigendumTitle : Specifications for tab washers for unified hexagons for aircraft.

Corrigendum


Subsector : T02 Registration Date : 2014-05-29Organization : BSICountry : United KingdomProject ID : 01401421/0001 Project EstablishedICS :National Ref : BS SP 55 and SP 56:1953/AMD1Title : Specifications for double coil spring washers for aircraft. Amendment



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2014-05-13Organization : TSECountry : TurkeyProject ID : tst07405/0001 Project EstablishedICS : 43.040.50National Ref :Title : Clutch Release AssemblyScope : This standard covers clutch release assembly for road vehicles.

Relatedness :National : NewEuropean : Modified BS 3092:1973

Subsector : T03 Registration Date : 2014-05-13Organization : TSECountry : Turkey

Project ID : tst07405/0001 Project EstablishedICS : 43.040.50National Ref :Title : Clutch Release AssemblyScope : This standard covers clutch release assembly for road vehicles.

Relatedness :National : NewInternational : Modified SAEJ 618:2012

Subsector : T03 Registration Date : 2014-05-13Organization : TSECountry : TurkeyProject ID : tst07405/0001 Project EstablishedICS : 43.040.50National Ref :Title : Clutch Release AssemblyScope : This standard covers clutch release assembly for road vehicles.

Relatedness :National : NewInternational : Modified SAEJ 619:2012

Subsector : T03 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst09444/0001 Project EstablishedICS : 43.040.50National Ref :Title : Road Vehicles - Suspension Systems - Ball StudScope : This standard covers ball stud used in suspension systems of road vehicles.

Relatedness :National : NewInternational : Modified SAE J 129:2010



Subsector : T03 Registration Date : 2014-05-16Organization : TSECountry : TurkeyProject ID : tst09444/0001 Project EstablishedICS : 43.040.50National Ref :

Title : Road Vehicles - Suspension Systems - Ball StudScope : This standard covers ball stud used in suspension systems of road vehicles.





Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2014-05-13Organization : TSECountry : TurkeyProject ID : tst10689/0001 Project EstablishedICS : 53.020.30, 53.060National Ref :Title : Pallet Stackers and High-Lift Platform Trucks - Stability TestsScope : This standard covers stability tests for pallet stackers and high lift platform trucks with

capacity up to and inclusive 5000 kg.

Relatedness :National : NewInternational : Modified ISO 22915-4:2009+Amd 1:2013


Subsector T15: CYCLES

Subsector : T15 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 11200942/0001 Project EstablishedICS :National Ref : 11200942Title : Stationary bicycle parking systems - Part 2: Test methods



Subsector T99: UNDETERMINED

Subsector : T99 Registration Date : 2014-05-13

Organization : DINCountry : GermanyProject ID : 11201037/0001 Project EstablishedICS :National Ref : 11201037Title : Roof racks for wheeled vehicle and its trailer - Requirements and test methods


Subsector : T99 Registration Date : 2014-05-13Organization : DINCountry : GermanyProject ID : 11201038/0001 Project EstablishedICS :National Ref : 11201038Title : Rear load carrier for wheeled vehicle and its trailer - Requirements and test methods



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2014-05-30Organization : UNICountry : ItalyProject ID : 14D00010/0001 Project EstablishedICS : 35.020National Ref : E14D00010Title : Unregulated professional activities - Professions in the ICT domain – WEB professional

- Definition of requirements for knowledge, ability and competenceScope : The standardization activity intends to define the general criteria for professionals active in

the ICT domain, establishing the fundamental requirements for the set of knowledge, abilities and competences that characterize them. The project addresses the professions in the ICT domain, regardless of the working methods and contractual issues. The envisaged standard will adopt the European reference framework, competencies definitions and related skills “e_Competence Framework 3.0” and UNI 11506:2013 standard.


Subsector : Z99 Registration Date : 2014-05-20Organization : SNCountry : NorwayProject ID : NOT14002/0001 Published StandardICS : 03.080.99National Ref : prNS 8436Title : General conditions of contract for call centre servicesScope : This standard establishes general conditions of contracts for call centre services



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

Monthly Notifications Register - IPQ · Monthly Notifications Register Notifications registered at...

Documents

Transcript of Monthly Notifications Register - IPQ · Monthly Notifications Register Notifications registered at...