MODUL-iT - mattteo...1.01 Our modules in injection moulded ABS form the basis of the MODUL-iT...

MODUL-iT ISO MODULES IN ABS

make things talk to each other

INJECTION MOULDED ABS

All MODUL-iT ISO modules are manufactured from injection moulded ABS. This in grey as well as transparent. Our choice for ABS is justified by the good performance of ABS in terms of scratch and impact resistance and the better score in terms of chemical resistance compared to Polycarbonate (PC).

DIVIDERS

All MODUL-iT ISO modules can be divided in both di-rections with light grey or transparent separations. Thanks to our unique fastening system, these dividers can be fixed in one movement without any additional accessories. You can also shorten the separations at the predetermined breaking points.


1.01

Our modules in injection moulded ABS form the basis of the MODUL-iT system. All modules have a standard ISO outer dimension of 600x400 mm. They can be exchanged between all cabinets, racks and trolleys of the MODUL-iT or MODU-FLEX system.

Within our assortment of modules there is a choice between trays and baskets, both in light grey (RAL7035) or transparent ABS.

- Trays have a closed base and sides. They are available in heights of 50, 100 and 200 mm. - Baskets have a perforated base and sides. They are available in heights of 100 and 200 mm.

With the MODUL-iT modules and their accessories, all material can be stored in a very efficient and orderly fashion, whether for medication, infusions, nursing or general consumables. The modularity of the MODUL-iT system always offers the most flexible, clear and ergonomic solution with a considerable saving of space.

MODUL-iT ISO MODULES IN ABS

STOP SYSTEM

All MODUL-iT ISO modules can be equipped with a stop system. This allows all modules to be used as a drawer in the various storage and transport elements without the risk of them falling to the ground.


1.02

LABEL HOLDERS

With all MODUL-iT ISO modules, label holders can be attached to the edge of the trays and baskets as well as to the separations inside. With the baskets, the la-bel holders can also be attached to the meshes in the sides.

XY COORDINATES

Numbers and letters are placed on the top of the edge of the modules to easily indicate the XY coordinates of the compartments.

MODUL-iT TRAY 600x400x50 mm - LIGHT GREY - WITH DIVIDERS

Article number Short Description

106405-10100 Tray grey 600x400x50 mm (LxWxH)

124005-11100 Divider grey 400x50 mm (LxH)


MODUL-iT TRAY 600x400x50 mm - TRANSPARENT - WITH DIVIDERS


106405-10101 Tray transparent 600x400x50 mm (LxWxH)

124005-10101 Divider transparent 400x50 mm (LxH)













1.03






MODUL-iT BASKET 600x400x200 mm - LIGHT GREY - WITH DIVIDERS


116420-10100 Basket grey 600x400x200 mm (LxWxH)








MODUL-iT BASKET 600x400x100 mm - LIGHT GREY - WITH DIVIDERS


116410-10100 Basket grey 600x400x100 mm (LxWxH)




1.04

MODUL-iT BASKET 600x400x100 mm - TRANSPARENT - WITH DIVIDERS


116410-10101 Basket transparent 600x400x100 mm (LxWxH)



MODUL-iT SEALABLE LID - LIGHT GREY - FOR ISO MODULES


106401-10100 Grey sealable lid for ISO modules

MODUL-iT BASKET 600x400x200 mm - TRANSPARENT - WITH DIVIDERS


116420-10101 Basket transparent 600x400x200 mm (LxWxH)



MODUL-iT STOP - LIGHT GREY - FOR ISO MODULES


121000-12102 Stop for ISO modules


1.05

MODUL-iT LABEL HOLDERS - SMALL SIZE - WITH PLASTIC CARDS


121001-12102 Label holder portrait 56x42 mm (HxW)

121006-12102 Label holder landscape 38x64 mm (HxW)

121002-16122 Plastic card white 59x39 mm (HxW)

920009-00000 Plastic card red 59x39 mm (HxW)

920009-00001 Plastic card blue 59x39 mm (HxW)

920009-00002 Plastic card yellow 59x39 mm (HxW)

920009-00003 Plastic card green 59x39 mm (HxW)

920009-00004 Plastic card orange 59x39 mm (HxW)

920009-00012 Plastic card “NO ENTRY” 59x39 mm (HxW)

920009-00014 Plastic card grey 59x39 mm (HxW)

920009-00015 Plastic card black 59x39 mm (HxW)

920009-00018 Plastic card transparent 59x39 mm (HxW)

MODUL-iT LABEL HOLDER - CREDIT CARD SIZE - WITH PLASTIC CARDS


121007-12102 Label holder credit card 52x89 mm (HxW)

920009-00005 Plastic card white 54x85 mm (HxW)

920009-00006 Plastic card red 54x85 mm (HxW)

920009-00007 Plastic card blue 54x85 mm (HxW)

920009-00008 Plastic card yellow 54x85 mm (HxW)

920009-00009 Plastic card green 54x85 mm (HxW)

920009-00010 Plastic card orange 54x85 mm (HxW)

920009-00013 Plastic card transparent 54x85 mm (HxW)

920009-00016 Plastic card black 54x85 mm (HxW)

920009-00017 Plastic card grey 54x85 mm (HxW)


1.06

IRIS RFID LABEL HOLDER - FOR IRIS i-ROOM


600000-00008 IRIS RFID label holder 63x85 mm (HxW)

MODUL-iT SHELF IN HPL - WHITE - 600x400x6 mm (LxWxH)


136406-71710 Shelf (ISO) in HPL 600x400x6 mm (LxWxH)

MODUL-iT LABEL HOLDER WITH 3-COLOUR WHEEL (GREEN-YELLOW-RED)


121001-12103 Label holder with wheel 60x54 mm (HxW)

MODUL-iT T-CONNECTOR - FOR SHORTENED DIVIDERS


121005-12102 T-connector for fixation of shortened dividers


1.07

MODUL-iT COVER FOR NARCOTICS DRAWER - WIDTH 600 mm- WITH LOCK


136406-50500 Cover for narcotics drawer with key lock

136406-50501 Cover for narcotics drawer with code lock

MODUL-iT SELF-ADHESIVE LABEL RAIL FOR HANDLE


920013-00001 Self-adhesive label rail 530 mm (L)

920013-00002 Self-adhesive label rail 330 mm (L)

MODUL-iT HANDLE 540 mm - WHITE - FOR ISO MODULES


121009-00002 Straight handle 540 mm (L)

121009-00003 Slant handle 540 mm (L)

MODUL-iT HANDLE 340 mm - WHITE - FOR ISO MODULES


121009-00004 Straight handle 340 mm (L)

121009-00005 Slant handle 340 mm (L)


1.08

MODUL-iT MEDICINE DRAWER - TRANSPARENT - 400x91x81 mm (LxWxH)


150025-10102 Medicine drawer 400x91x81 mm (LxWxH)

150031-11101 Divider for medicine drawer 91x81 mm (WxH)














1.09


1.10

LONG DIVIDER 600 mm

The teeth of the long dividers point upwards. These di-viders must always be placed in the module first. All long dividers can be shortened at the predetermined breaking points.

SHORT DIVIDER 400 mm

The teeth of the short dividers point downwards. The-se dividers must always be placed in the module after the long dividers. All short dividers can be shortened at the predetermined breaking points.

SHORTENED DIVIDER WITH T-CONNECTOR

Shortened dividers are attached to the other dividers by means of a T-connector. This allows you to create compartments of different sizes within the modules.

USE OF DIVIDERS

1) Long divider 600 mm

2) Short divider 400 mm

3) Shortened divider with T-connector

1

2

3


Tel: +32 3 369 11 08Fax: +32 3 311 53 89

Mail: [email protected]: www.mattteo.com

MODUL-iT - mattteo...1.01 Our modules in injection moulded ABS form the basis of the MODUL-iT...

Documents

Transcript of MODUL-iT - mattteo...1.01 Our modules in injection moulded ABS form the basis of the MODUL-iT...