Mims effect

1

2

3-Processing

4

5-Arduino

/* Blink Turns on an LED on for one second, then off for one second, repeatedly. This example code is in the public domain. */ // Pin 13 has an LED connected on most Arduino boards. // give it a name: int led = 13;

// the setup routine runs once when you press reset: void setup() { // initialize the digital pin as an output. pinMode(led, OUTPUT); }

// the loop routine runs over and over again forever: void loop() { digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(led, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second }

6-Blink code

7-Search a code

CODE int sensorPin = A0; int sensorValue = 0;   void setup() { Serial.begin(9600); pinMode(sensorPin, INPUT); } void loop() { sensorValue = analogRead(sensorPin); Serial.println(sensorValue); delay(1500); }

8

9-My code import processing.serial.*;import cc.arduino.*;Arduino arduino; //creates arduino objectcolor back = color(64, 218, 255); //variables for the 2 colorsint sensor= 0;int read;float value;void setup() {size(800, 600);arduino = new Arduino(this, Arduino.list()[0], 57600); //sets up arduinoarduino.pinMode(sensor,

Arduino.INPUT);//setup pins to be input (A0 =0?)

background(back);}

void draw() {read=arduino.analogRead(sensor);background(back);println (read);value=map(read, 0, 500, -200, width*4); //use to callibrateellipse(value, 300,30, 30);}

10

11

12

13

14

15-Errors

16

17

18

Processing.org Arduino.cc PDF Books Google images Wikipedia

19-References

Thanks for listening and

I hope you liked

The End

video mims effect.mp4