Megashor - RMD Kwikform...Features & Benefits Megashor can be assembled into many configurations...

RMD Kwikform QatarMegashor

PRODUCT BROCHURE

Product OverviewMegashor is an incredibly versatile, ultra high-duty modular propping system.

FasterQuality assured manufacturing process, using close-tolerance jigs ensures consistent and accurate fabrication - Excellent assembly alignment on site, saving time, onsite modifications and labour costs

Huge strength capability of Megashor means fewer components are needed and assembly time can be reduced, saving time and money

SaferUnrivaled axial load capacity and high axial stiffness - Megashor will accommodate the rigours of ultra heavy duty propping, cofferdams, bridge bearing replacement and facade retention applications.

Megashor is approved for support of bridges open to live traffic - bridge bearing replacement work can be carried out with minimum disruption to traffic flows.

EasierEight strut sizes, ranging from 15mm to 5400mm, plus a full range of accessories - Megashor can be assembled into props, towers and trusses of almost any length, all from standard components.

RMD Kwikform Superslim Soldiers provide restraint to Megashor and are available in nine lengths from 10mm to 3600mm. This gives ultimate flexibility when planning the sizes of towers and centres of props - minimises the need for custom made equipment.

Megashor Ultra heavy duty modular systemPRODUCT BROCHURE

1

ApplicationsFrom heavy lifting towers to travellers for tunnel formwork, bracing for excavations, shoring and trusses, Megashor can be configured for a huge variety of applications.

Heavy duty propping

Cofferdams

Bridge launching

Bearing replacement

Facade retention

Travelling slab and tunnel formwork

Excavation support


2

Features & BenefitsMegashor can be assembled into many configurations including props, heavy lifting towers, frames and trusses.

Comprehensive range of sizesEight strut sizes, ranging from 15mm to 5400mm, plus a full range of accessories - Megashor can be assembled into props, towers and trusses of almost any length, all from standard components.

Ultra Heavy DutyMegashor will accommodate the rigours of heavy-duty shoring, cofferdams, bridge bearing replacement and facade retention applications.

Megashor is approved for support of bridges open to live trafficBridge bearing replacement work can be carried out with minimum disruption to traffic flows.

Complimented by RMD Kwikform's Superslim Soldier rangeRMD Kwikform Superslim Soldiers provide restraint to Megashor and are available in nine lengths from 10mm to 3600mm. This gives ultimate flexibility when planning the sizes of towers and centres of props - minimises the need for custom made equipment.

Global Logistics chainWhenever and wherever you need it, a rapid response can be assured.

Quality assured manufacturingEnsures consistent and accurate fabrication.


3

In DetailVersatileMegashor is manufactured in eight lengths ranging from 5400mm to 15mm, allowing props of any length to be created.

CompatibilityCombined with Superslim Soldiers, heavy duty towers with almost any plan dimensions can be constructed.

QualityMegashor is manufactured from two, 6mm thick pressed steel channels spaced 110mm apart, with steel batten plates welded to the flanges at 900mm centres along the length of each side of Megashor shaft.

SimpleA 15mm thick end plate is welded to each end of Megashor leg, forming an overall section of 290 x 280 mm. These end plates have six 22mm diameter holes, which are used to bolt the Megashor legs end to end, using M20 x 60 bolts and nuts.


4

ProjectsPROJECTYas Hotel, Innovative Shoring Solutions

REGIONMENA

STRUCTURES

PROJECTDubai Metro

REGIONMENA

STRUCTURESRail

PROJECTREGIONSTRUCTURES

PROJECTREGIONSTRUCTURES

PROJECTLusail Tunnel, Qatar

REGIONMENA

STRUCTURESTunnels


5

Components

Note: Galvanised Megashor Legs also available.

Code Description Weight

MSX10090 Leg 90mm 22.0kg




MSX11800 Leg 1800mm 113.0kg

MSX12700 Leg 2700mm 161.0kg

MSX15400 Leg 5400mm 305.0kg

Legs (Painted)


MSX10012 End Plate 9.5kg

End Plate

SWL: Please refer to Megashor Technical Data Sheets


MSX10011 Screw Jack. Range = 410 - 620mm 65.9kg

Screw Jack

Note: Refer to Megashor Technical Data Sheets for maximum capacities.


MSX10022 Jack Spanner 20.1kg

Jack Spanner

Image not found or type unknown


MSX10021 Megashor Bearing Plate 26.2kg

Bearing Plate 40mm


6

Components


MSX10017 Hydraulic Unit 146.0kg

Hydraulic Unit

Important: When the Rocking Head is used to support a header beam the tapped holes must be connected to the Megashor section NOT THE HEADER BEAM. Header Beams should fully web stiffened adjacent to Rocking Heads. Note: Rocking Heads may be used in either orientation relative to Megashor without reduction in SWL.


MSX10026 Rocking Head 180mm 47.9kg

Rocking Head


MSU10002 Brace Plate 60.3kg

MSX10043 Brace Base Plate 20.0kg

MSX10044 Brace Coupler 3.6kg

Brace Plates


MSX10024 Joint Stiffener 8.4kg

Joint Stiffener


BNX20023 Plate Washer 90 x 90 x 15 x 18mm 0.92kg

Plate Washer


7

Components

AWL - when attached to Megashor leg = 34kN (68kN per pair)


MSU10001 Flat Brace 60 x 8mm alteration -

MSX10003 Flat Brace 60 x 8mm per metre 3.7kg

MSX10005 Vernier Braces Long Outer Galv 11.5kg

MSX10006 Vernier Baraces Long Inner Galv 10.7kg

MSX10033 Vernier Braces Short Inner Galv 5.3kg

MSX10034 Vernier Braces Short Outer Galv 7.2kg

MSU10003 Megashor Plan Brace Cleat 1.5kg

Megashor Fixed & Adjustable Braces


MSX10013 Megashor Half Portal Frame 453.8kg

Half Portal Frame


MSY10001 Megashor Lift Point 50kN 1.79kg

BNX20100 Megashor pin M20 High Yield 0.4kg

SSU10011 Superslim R Clip 5x100mm 0.03kg

Lift Point


MSX10027 Megashor Truss Connector 15.4kg

Truss Connector


MSX10030 Megatruss Node 67.3kg

Megatruss Node


8

Components


MSX10028 Megatruss End Bearer 111.6kg

Megatruss End Bearer


MSX10019 Megatruss Intermediate Bearer 13.2kg

Megatruss Intermediate Bearer


BNX20024 Chord Spacer 60x60x20x22 dia 0.5kg

Chord Spacer


MSU10008 Megashor Pus Pull Jack R/H 74.8kg

MSU10009 Megashor Push Pull Jack L/H 74.8kg

Push Pull Jacks


MSU10007 Megashor Push Pull Tilt Plate 48.9kg

Push Pull Tilt Plate


MSU10005 Megashor 90 Degree Corner 68.8kg

90 Degree Corner


9

Components


MSU10006 Megashor Push Pull Adaptor 19.0kg

Pull Pull Adaptor


MSU20004 Megashor Heavy Duty Tie Beam 39.1kg

Heavy Duty Tie Beam


MSX10009 Megashor Header Beam 950mm 150.3kg




Header Beams


10

Components


BNU10050 Props Brace Pin M24 /M20 0.43kg

BNU12001 Nut - M12 Hexagon Plated 0.01kg

BNU12009 Set Pin - M12x40 Gr8.8 plated 0.05kg

BNU16001 M16 Hexagon Nut - Grade 8.8 ZP 0.03kg

BNU16007 M16x40 Set Pin - Grade 8.8 ZP 0.09kg

BNU16009 M16x60 Bolt - Grade 8.8 ZP 0.11kg

BNU20001 M20 Hexagon Nut - Grade 8.8 ZP 0.06kg

BNU20003 Washer - M20 Round 0.03kg

BNU20005 M20x40 Set Pin - Grade 8.8 ZP 0.27kg

BNU20010 M20x60 Csk Set Pin - Grade 8.8 ZP 0.18kg

BNU20011 M20x60 Bolt - Grade 8.8 ZP 0.28kg

BNU20013 M20x80 Bolt - Grade 8.8 0.29kg

BNU20015 M20x100 Bolt - Grade 8.8 0.32kg

BNU20016 M20x130 Bolt - Grade 8.8 BZP 0.40kg

BNX20027 M20x45 Set Pin - Grade 8.8 BZP Csk 0.17kg

BNX20028 M20x50 Bolt - Grade 8.8 ZP 0.18kg

BNX20030 M20x90 Bolt - Grade 8.8 BZP 0.28kg

BNU24001 M24 Hexagon Nut 0.06kg

BNU24002 M24x110 Bolt - Grade 8.8 BZP 0.1kg

BNU24008 M24x180 - Grade 8.8 BZP Hex Bolt 0.73kg

BNU42001 M42x200 - Grade 8.8 Bolt ZP Short 2.76kg

BNU42002 M42 Nut Gr8 0.59kg

BNX52001 M52 Hex Nut 8.8 Galv 1.07kg

BNX52002 M52x160 Gr 8.8 Socket Cap Screw 3.93kg

Nuts & Bolts


11

ServicesOur value added services set us apart...

Consultancy & DesignOur technical sales staff will work with you to identify project requirements, analyse formwork options, planning, design and safety specifications. Early involvement ensures the best results.

Engineering ExpertiseOur experienced engineering design staff will translate your requirements into cost effective formwork and shoring design solutions, tailored to the exacting needs of the project. By combining our designers knowledge, flair and experience of the capabilities of our equipment range, the systems we design are innovative, practical and cost effective.

Technological AdvancementsRMD Kwikform is proud to be leading the way in the development of technological support. Integrating 3D CAD design throughout the business, coupled with in house design programs specifically for RMD Kwikform products, our customers can now benefit from seeing their vision come to life. We can translate complicated requirements quickly and easily.

On Site Technical AssistanceTrained Site Assistance Technicians can be on hand to provide practical guidance on how best to utilise our equipment in a safe and efficient manner, as well as provide solutions for required design variations due to on site conditions.

Equipment AvailabilityWith dedicated equipment storage yards throughout the Middle East, RMD Kwikform can respond quickly and easily to our customers requirements. With access to the extensive regional network, our customers are able to benefit from availability, flexible delivery and improved equipment storage. A high quality fleet, delivered when its needed, on time, in full.

Live Demonstrations & Training FacilitiesRMD Kwikform Middle East is able to provide customers with product demonstrations, allowing a more detailed understanding of the benefits our equipment can provide. We also offer hands-on practical training in the safe and efficient use of our products, undertaken either at our demonstration facilities or on our customers site ensuring they have all the knowledge they need to work safely with our equipment on site.


ContactsRMD KWIKFORM QATARDOHA OFFICEPO Box 405, Building No. 146, Zone No. 40, Al Muntazah Street, Doha, QatarTel: +974 4465 3034Fax: +974 4465 3282Email: [email protected]

WORLDWIDE CONTACTSRMD KWIKFORM UNITED KINGDOMTel: +44 1922 743743Email: [email protected]

RMD AUSTRALIATel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: [email protected]

RMD NEW ZEALANDTel: +64 9 259 0353Email: [email protected]

RMD KWIKFORM HONG KONGTel: +852 2415 4882Fax: +852 2745 0232Email: [email protected]

RMD KWIKFORM ASIA PACIFICTel: +63 917 5266760Email: [email protected]

RMD KWIKFORM PHILIPPINESTel: +632 696 7635Fax: +632 661 6456Email: [email protected]

RMD KWIKFORM UAETel: +971 6 553 4173Fax: +971 6 553 4327Email: [email protected]

RMD KWIKFORM BAHRAINTel: +973 1738 2724Fax: +973 1738 2624Email: [email protected]

RMD KWIKFORM OMANTel: +968 2413 7828Fax: +968 2413 7998Email: [email protected]

RMD KWIKFORM SAUDI ARABIATel: +966 13 896 8665Fax: +966 13 896 8664Email: [email protected]

RMD KWIKFORM INDIATel: +91 44 6693 3300Email: [email protected]

RMD CHILETel: +56227149800Email: [email protected]

RMD KWIKFORM USATel: +1 303 252 7000Fax: +1 303 252 7319Email: [email protected]

RMD KWIKFORM SOUTH AFRICATel: +27 12 004 1000Email: [email protected]

RMD KWIKFORM IRELANDTel: +353 (0)1 830 2500Fax: +353 (0)1 830 2741Email: [email protected]

RMD KWIKFORM ESPAÑATel: +34 91 555 6104Fax: +34 91 555 4745Email: [email protected]

RMD KWIKFORM DBMETel: +973 1738 2724Fax: +973 1738 2624Email: [email protected]

RMD KWIKFORM PANAMATel: +507 280.0869Email: [email protected]

RMD KWIKFORM COLOMBIATel: +57 321 214 71 18Email: [email protected]


www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.

The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.

An Interserve Company

http://www.rmdkwikform.com

Megashor - RMD Kwikform...Features & Benefits Megashor can be assembled into many configurations...

Documents

Transcript of Megashor - RMD Kwikform...Features & Benefits Megashor can be assembled into many configurations...