Megashor Ultra heavy-duty shoring

Megashor

Heavy duty modular propping system designed

for axial loads of up to 750kN.

Megashor: Features and Benefits

• High Load: Up to 750kN per leg and 3,000kN per tower.

• Unlimited Options: Can be assembled into props, towers, trusses and

various other shapes.

• Flexibility: Superslim Soldiers provide restraint to Megashor and they can be

used at various lengths and angles.

• Accessories: Megashors full range of accessories makes it highly versatile.

• Limiting Disruption: Megashor is approved for support of bridges that are

open to live traffic.

• Quality: Quality assured manufacturing process results in consistent

assembly alignment onsite, saving on modifications and labour cost.

Megashor: Where is it used?

• Heavy Duty Shoring

• New Bridge Construction

• Bridge Launching

• Bearing Replacement

• Façade Retention

• Propping

• Megatruss

• Travelling Slab and

Tunnel Formwork

Megashor: Used on Stadiums

Rectangular Stadium, Melbourne

Stadium Australia, Sydney

Megashor is frequently used in the

construction of stadiums throughout the

world, it is often used to support the

roof or trusses.

Stadium Construction

Suwon

Stadium,

Korea

Megashor: Some of its components

Megashor Legs Having nine leg sizes, ranging from 15 to

5,400mm means that Megashor can be

assembled into props, towers and trusses

of almost any length.

Four Leg

Support Tower Twin Leg Trestle Single Prop

Megashor can be used in single or multiple leg

support applications, both vertically or

horizontally. It can also be configured into

support trusses with varying depths and spans.

Megashor: Other Components

The Megashor Rocking Head is

used to connect components at

an angle.

Rocking Head

RMD Supper Slim Soldiers provide restraint for

Megashor. They are available in ten sizes, from 90 to

3,600mm, which provides the ultimate in flexibility

when planning the sizes of towers and centres of

props.

Super Slim Soldiers

WWL: 550 - 1000kN in

compression depending

upon height.

Range: 410-620mm max.

Screw Jack

Bracing Plate For spreading loads

and connecting

braces.

Header Beam Two sizes of 3,800

and 5,000mm.

Two sizes: long

1520 – 1835mm,

short 915 – 235mm.

Turnbuckles

Megashor: Key Components

• Jack:

420-610mm adjustment.

Carries full 1,000kN load.

• Rocking Head:

Up to 45 degree slope.

• Megatruss Node:

Easy assembly to truss.

• Superslim Soldiers:

Compatibility allows range extension.

The End