MBT Distal Slot Torque Length Slot Torque mm APC Offset...
Transcript of MBT Distal Slot Torque Length Slot Torque mm APC Offset...
Victory Series™ Buccal TubesDesigned for Comfort and Performance
Slot Torque Distal Offset
Length mm APC™
MBT™ SystemArch Aux.
Upper 1st Molar Convertible Single-14 10 3.6 x x
0 0 3.6 x
0 6 3.6 x
-10 7 4.3 x
Upper 1st Non-Convertible-14 10 4.6 x x
Upper 1st Molar Double Convertible Occlusal Headgear Tube
0 0 3.6
0 7 3.6 & 4.3
-10 7 3.6 & 4.3
-10 14 3.6 & 4.3
-14 10 4.6 x
Upper 1st Molar Convertible Double0 0 0 3.6
-10 0 7 3.6
Upper 1st Molar Triple Combination Occlusal Headgear Tube
0 0 0 3.6
0 0 15 4
-10 0 7 3.6
-10 0 14 3.6
-14 0 10 4.3 x
Lower 1st Molar Convertible Single0 0 3.6 x
0 6 3.6 x
-10 0 4.3 x
-20 0 4.3 x x
-25 0 4.3 x
-25 6 3.6 & 4.3
x
Lower 1st Molar Non-Convertible Single – Funneled-20 0 4.6 x
Slot Torque Distal Offset
Length mm APC™
MBT™ SystemArch Aux.
Lower 1st Molar Non-Convertible Single-20 0 4.3 x x
Lower 1st Molar Double0 0 0 3.6 x
-25 0 7 3.6 x
-20 0 0 4.3 x x
Lower 1st Molar Lip Bumper Convertible Double-25 5 4.3
Upper 2nd Molar Non-Convertible Single0 0 3.6 x
0 6 3.6 x
-10 6 3.6 x
-10 10 3.6 x
-14 10 4.3 x x
-19 8 3.9 x x
Lower 2nd Molar Non-Convertible Single0 0 3.6 x
0 6 3.6 x
-10 0 4.3 x x
-25 6 3.6 x
-25 10 3.6 x
-30 6 3.6 x
Upper 2nd Molar Mini Tube0 0 2.5 x
-10 0 2.5 x
-14 0 2.5 x x
Lower 2nd Molar Mini Tube0 0 2.5 x
-10 0 2.5 x x
-25 0 2.5 x
Upper 2nd Bicuspid Tube-7 0 3.1 x x
Lower 2nd Bicuspid Tube-17 2 3.1 x x
Advanced, PreciseSolutions
for Molars
Victory Series™ Buccal Tubes provide you with
a well-designed, reliable and predictable
orthodontic solution, offering a better experience
both chairside and in treatment. Metal-injection
molded for dimension consistency and rounded
surfaces, the tubes have a contoured shape and
hook designed for both practicality and comfort.
Funneled features allow for easier mesial wire
insertion, and deep distal notch provides more
effective wire crimping. Multiple torque and
angulation options meet the varied treatment
needs of different patients.
Your reliable molar appliance solution
3M CanadaHealth Care Division 300 Tartan Dr. London, ON N5V 4M9 CanadaPhone 1-800-443-1661
3M, APC, MBT, and Victory Series are trademarks of 3M. Used under license in Canada. © 3M 2016. All rights reserved. 70-2021-3966-6 1601
3M Oral Care2510 Conway AvenueSt. Paul, MN 55144-1000 USAPhone 1-800-423-4588Web 3M.com/ortho
3
Victory Series™ Buccal TubesDesigned for Comfort and Performance
Slot Torque Distal Offset
Length mm APC™
MBT™ SystemArch Aux.
Upper 1st Molar Convertible Single-14 10 3.6 x x
0 0 3.6 x
0 6 3.6 x
-10 7 4.3 x
Upper 1st Non-Convertible-14 10 4.6 x x
Upper 1st Molar Double Convertible Occlusal Headgear Tube
0 0 3.6
0 7 3.6 & 4.3
-10 7 3.6 & 4.3
-10 14 3.6 & 4.3
-14 10 4.6 x
Upper 1st Molar Convertible Double0 0 0 3.6
-10 0 7 3.6
Upper 1st Molar Triple Combination Occlusal Headgear Tube
0 0 0 3.6
0 0 15 4
-10 0 7 3.6
-10 0 14 3.6
-14 0 10 4.3 x
Lower 1st Molar Convertible Single0 0 3.6 x
0 6 3.6 x
-10 0 4.3 x
-20 0 4.3 x x
-25 0 4.3 x
-25 6 3.6 & 4.3
x
Lower 1st Molar Non-Convertible Single – Funneled-20 0 4.6 x
Slot Torque Distal Offset
Length mm APC™
MBT™ SystemArch Aux.
Lower 1st Molar Non-Convertible Single-20 0 4.3 x x
Lower 1st Molar Double0 0 0 3.6 x
-25 0 7 3.6 x
-20 0 0 4.3 x x
Lower 1st Molar Lip Bumper Convertible Double-25 5 4.3
Upper 2nd Molar Non-Convertible Single0 0 3.6 x
0 6 3.6 x
-10 6 3.6 x
-10 10 3.6 x
-14 10 4.3 x x
-19 8 3.9 x x
Lower 2nd Molar Non-Convertible Single0 0 3.6 x
0 6 3.6 x
-10 0 4.3 x x
-25 6 3.6 x
-25 10 3.6 x
-30 6 3.6 x
Upper 2nd Molar Mini Tube0 0 2.5 x
-10 0 2.5 x
-14 0 2.5 x x
Lower 2nd Molar Mini Tube0 0 2.5 x
-10 0 2.5 x x
-25 0 2.5 x
Upper 2nd Bicuspid Tube-7 0 3.1 x x
Lower 2nd Bicuspid Tube-17 2 3.1 x x
Advanced, PreciseSolutions
for Molars
Victory Series™ Buccal Tubes provide you with
a well-designed, reliable and predictable
orthodontic solution, offering a better experience
both chairside and in treatment. Metal-injection
molded for dimension consistency and rounded
surfaces, the tubes have a contoured shape and
hook designed for both practicality and comfort.
Funneled features allow for easier mesial wire
insertion, and deep distal notch provides more
effective wire crimping. Multiple torque and
angulation options meet the varied treatment
needs of different patients.
Your reliable molar appliance solution
3M CanadaHealth Care Division 300 Tartan Dr. London, ON N5V 4M9 CanadaPhone 1-800-443-1661
3M, APC, MBT, and Victory Series are trademarks of 3M. Used under license in Canada. © 3M 2016. All rights reserved. 70-2021-3966-6 1601
3M Oral Care2510 Conway AvenueSt. Paul, MN 55144-1000 USAPhone 1-800-423-4588Web 3M.com/ortho
3
Victory Series™ Second Molar Buccal TubesVictory Series Upper Second Molar Tubes address treatment issues that arise due to balancing and lingual cusp interference during the finishing stages of treatment. And the funneled design helps ease archwire insertion. The positioning and seating notches are there for better control. This tube offers ample space in the distal notch for wire crimping.
Side Gripping Notches
Distal Notch for easy placement of ligatures
Seating notch
Mesial extended base
No tie-wings to come into occlusion
The Victory Series™ Mini TubeThe Victory Series Mini Tube is an ideal solution for dealing with partially erupted second molars. These tubes have a mesially-extended, compound contoured, micro-etched bonding base that allows for superior fit and bond strength. No other mini tube offers 3M’s combination of advanced hook design, precise base fit, and seating notch.
Victory Series™ 2nd Bicuspid TubesThe design of the Victory Series 2nd Bicuspid Tube eliminates occlusal tie-wings, which can cause occlusal interference and its potential for bond failures.
With the use of the tube rather than a slot, the need for ligatures has been eliminated as well. No ligatures means reduced friction on the archwire, providing enhanced posterior sliding mechanics. Together, the design features of Victory Series 2nd Bicuspid Tubes make treatment more efficient and predictable.
There are advantages for the patient, too. The smooth radiused design improves patient comfort and facilitates better hygiene.
Lower Non-Convertible Single
Upper Convertible Single
Upper Convertible Triple Combination—Occlusal Headgear Tube
Funneled Entry Way
Seating Notch
Radiused Hook
Metal Injection Molded, including integral hook
Chamfered tube opening to assist in wire insertion
Micro-Etched base with offset option
Victory Series™ First Molar Buccal TubesThese buccal tubes are designed to receive the archwire on the first try and reduce occlusal interference. The radiused hook is designed for both comfort and practical function, just as the tubes are contoured for patient comfort. Many First Molar Tubes are also available with a jumbo base option which provides 30% more bonding area when required.
Convertible tubes have a metal-injection-molded convertible cap for consistent, reliable conversion. They provide ample space under the tie wings for effective ligature tying.
Nonconvertible tubes have a smooth rounded hook, and contoured design, assuring greater patient comfort. Seating and gripping notches, distal notches and an expanded mesial funnel entry make placement, ligation and archwire insertions easier.
Upper Convertible Double Combination—Occlusal Headgear Tube
Integral convertible capContoured design
Victory Series™ Molar Bonding BasesYou can achieve a stronger, more consistent bond in every case with the Victory Series Molar Bonding Base. Look closely at its profile and you’ll see a curved anatomical design for optimal tube-to-tooth fit and a buccal indent that naturally conforms to the surface of the molar, making it easier to correctly position the buccal tube in place.
The micro-etched 80 gauge mesh, along with the buccal indent and the correct anatomical fit, are designed for increased bond strength. The buccal indent assists in more accurate tube positioning; a key advantage that can eliminate time consuming archwire adjustments. And with the Victory Series molar bonding base, you’ll never have to worry about tooth separation for band placement.
The APC™ Adhesive Coated Appliance System...is the fastest, most convenient and efficient method you can use for direct bond buccal tube placement. Most orthodontic professionals will agree that “successful bonding” is the single most important factor in keeping a practice and its schedule stress-free. The APC adhesive system not only reduces bonding variables that contribute to bond failure, but goes above and beyond by simplifying the set-up procedure as well as providing an inventory framework that is easy to control and manage.
PreweldingOur welding process uses the latest technology to ensure accurate, consistent welds. Monitoring of the electrical current during welding allows us to know the weld strength of every single weld, instead of testing samples from a group of welds, reducing the chance for variability or weak weld strength within a certain batch.
Separate to prewelding, the bands themselves have unique features:
• Straight interproximal walls for reduced tooth separation
• Reduced gingival/occusal dimensions to reduce the occurrence of interference
• Increased occlusal edge strength for reduced deformation
Victory Series™ Buccal Tubes
Ligature wire channel
Victory Series™ Second Molar Buccal TubesVictory Series Upper Second Molar Tubes address treatment issues that arise due to balancing and lingual cusp interference during the finishing stages of treatment. And the funneled design helps ease archwire insertion. The positioning and seating notches are there for better control. This tube offers ample space in the distal notch for wire crimping.
Side Gripping Notches
Distal Notch for easy placement of ligatures
Seating notch
Mesial extended base
No tie-wings to come into occlusion
The Victory Series™ Mini TubeThe Victory Series Mini Tube is an ideal solution for dealing with partially erupted second molars. These tubes have a mesially-extended, compound contoured, micro-etched bonding base that allows for superior fit and bond strength. No other mini tube offers 3M’s combination of advanced hook design, precise base fit, and seating notch.
Victory Series™ 2nd Bicuspid TubesThe design of the Victory Series 2nd Bicuspid Tube eliminates occlusal tie-wings, which can cause occlusal interference and its potential for bond failures.
With the use of the tube rather than a slot, the need for ligatures has been eliminated as well. No ligatures means reduced friction on the archwire, providing enhanced posterior sliding mechanics. Together, the design features of Victory Series 2nd Bicuspid Tubes make treatment more efficient and predictable.
There are advantages for the patient, too. The smooth radiused design improves patient comfort and facilitates better hygiene.
Lower Non-Convertible Single
Upper Convertible Single
Upper Convertible Triple Combination—Occlusal Headgear Tube
Funneled Entry Way
Seating Notch
Radiused Hook
Metal Injection Molded, including integral hook
Chamfered tube opening to assist in wire insertion
Micro-Etched base with offset option
Victory Series™ First Molar Buccal TubesThese buccal tubes are designed to receive the archwire on the first try and reduce occlusal interference. The radiused hook is designed for both comfort and practical function, just as the tubes are contoured for patient comfort. Many First Molar Tubes are also available with a jumbo base option which provides 30% more bonding area when required.
Convertible tubes have a metal-injection-molded convertible cap for consistent, reliable conversion. They provide ample space under the tie wings for effective ligature tying.
Nonconvertible tubes have a smooth rounded hook, and contoured design, assuring greater patient comfort. Seating and gripping notches, distal notches and an expanded mesial funnel entry make placement, ligation and archwire insertions easier.
Upper Convertible Double Combination—Occlusal Headgear Tube
Integral convertible capContoured design
Victory Series™ Molar Bonding BasesYou can achieve a stronger, more consistent bond in every case with the Victory Series Molar Bonding Base. Look closely at its profile and you’ll see a curved anatomical design for optimal tube-to-tooth fit and a buccal indent that naturally conforms to the surface of the molar, making it easier to correctly position the buccal tube in place.
The micro-etched 80 gauge mesh, along with the buccal indent and the correct anatomical fit, are designed for increased bond strength. The buccal indent assists in more accurate tube positioning; a key advantage that can eliminate time consuming archwire adjustments. And with the Victory Series molar bonding base, you’ll never have to worry about tooth separation for band placement.
The APC™ Adhesive Coated Appliance System...is the fastest, most convenient and efficient method you can use for direct bond buccal tube placement. Most orthodontic professionals will agree that “successful bonding” is the single most important factor in keeping a practice and its schedule stress-free. The APC adhesive system not only reduces bonding variables that contribute to bond failure, but goes above and beyond by simplifying the set-up procedure as well as providing an inventory framework that is easy to control and manage.
PreweldingOur welding process uses the latest technology to ensure accurate, consistent welds. Monitoring of the electrical current during welding allows us to know the weld strength of every single weld, instead of testing samples from a group of welds, reducing the chance for variability or weak weld strength within a certain batch.
Separate to prewelding, the bands themselves have unique features:
• Straight interproximal walls for reduced tooth separation
• Reduced gingival/occusal dimensions to reduce the occurrence of interference
• Increased occlusal edge strength for reduced deformation
Victory Series™ Buccal Tubes
Ligature wire channel
Victory Series™ Second Molar Buccal TubesVictory Series Upper Second Molar Tubes address treatment issues that arise due to balancing and lingual cusp interference during the finishing stages of treatment. And the funneled design helps ease archwire insertion. The positioning and seating notches are there for better control. This tube offers ample space in the distal notch for wire crimping.
Side Gripping Notches
Distal Notch for easy placement of ligatures
Seating notch
Mesial extended base
No tie-wings to come into occlusion
The Victory Series™ Mini TubeThe Victory Series Mini Tube is an ideal solution for dealing with partially erupted second molars. These tubes have a mesially-extended, compound contoured, micro-etched bonding base that allows for superior fit and bond strength. No other mini tube offers 3M’s combination of advanced hook design, precise base fit, and seating notch.
Victory Series™ 2nd Bicuspid TubesThe design of the Victory Series 2nd Bicuspid Tube eliminates occlusal tie-wings, which can cause occlusal interference and its potential for bond failures.
With the use of the tube rather than a slot, the need for ligatures has been eliminated as well. No ligatures means reduced friction on the archwire, providing enhanced posterior sliding mechanics. Together, the design features of Victory Series 2nd Bicuspid Tubes make treatment more efficient and predictable.
There are advantages for the patient, too. The smooth radiused design improves patient comfort and facilitates better hygiene.
Lower Non-Convertible Single
Upper Convertible Single
Upper Convertible Triple Combination—Occlusal Headgear Tube
Funneled Entry Way
Seating Notch
Radiused Hook
Metal Injection Molded, including integral hook
Chamfered tube opening to assist in wire insertion
Micro-Etched base with offset option
Victory Series™ First Molar Buccal TubesThese buccal tubes are designed to receive the archwire on the first try and reduce occlusal interference. The radiused hook is designed for both comfort and practical function, just as the tubes are contoured for patient comfort. Many First Molar Tubes are also available with a jumbo base option which provides 30% more bonding area when required.
Convertible tubes have a metal-injection-molded convertible cap for consistent, reliable conversion. They provide ample space under the tie wings for effective ligature tying.
Nonconvertible tubes have a smooth rounded hook, and contoured design, assuring greater patient comfort. Seating and gripping notches, distal notches and an expanded mesial funnel entry make placement, ligation and archwire insertions easier.
Upper Convertible Double Combination—Occlusal Headgear Tube
Integral convertible capContoured design
Victory Series™ Molar Bonding BasesYou can achieve a stronger, more consistent bond in every case with the Victory Series Molar Bonding Base. Look closely at its profile and you’ll see a curved anatomical design for optimal tube-to-tooth fit and a buccal indent that naturally conforms to the surface of the molar, making it easier to correctly position the buccal tube in place.
The micro-etched 80 gauge mesh, along with the buccal indent and the correct anatomical fit, are designed for increased bond strength. The buccal indent assists in more accurate tube positioning; a key advantage that can eliminate time consuming archwire adjustments. And with the Victory Series molar bonding base, you’ll never have to worry about tooth separation for band placement.
The APC™ Adhesive Coated Appliance System...is the fastest, most convenient and efficient method you can use for direct bond buccal tube placement. Most orthodontic professionals will agree that “successful bonding” is the single most important factor in keeping a practice and its schedule stress-free. The APC adhesive system not only reduces bonding variables that contribute to bond failure, but goes above and beyond by simplifying the set-up procedure as well as providing an inventory framework that is easy to control and manage.
PreweldingOur welding process uses the latest technology to ensure accurate, consistent welds. Monitoring of the electrical current during welding allows us to know the weld strength of every single weld, instead of testing samples from a group of welds, reducing the chance for variability or weak weld strength within a certain batch.
Separate to prewelding, the bands themselves have unique features:
• Straight interproximal walls for reduced tooth separation
• Reduced gingival/occusal dimensions to reduce the occurrence of interference
• Increased occlusal edge strength for reduced deformation
Victory Series™ Buccal Tubes
Ligature wire channel
Victory Series™ Buccal TubesDesigned for Comfort and Performance
Slot Torque Distal Offset
Length mm APC™
MBT™ SystemArch Aux.
Upper 1st Molar Convertible Single-14 10 3.6 x x
0 0 3.6 x
0 6 3.6 x
-10 7 4.3 x
Upper 1st Non-Convertible-14 10 4.6 x x
Upper 1st Molar Double Convertible Occlusal Headgear Tube
0 0 3.6
0 7 3.6 & 4.3
-10 7 3.6 & 4.3
-10 14 3.6 & 4.3
-14 10 4.6 x
Upper 1st Molar Convertible Double0 0 0 3.6
-10 0 7 3.6
Upper 1st Molar Triple Combination Occlusal Headgear Tube
0 0 0 3.6
0 0 15 4
-10 0 7 3.6
-10 0 14 3.6
-14 0 10 4.3 x
Lower 1st Molar Convertible Single0 0 3.6 x
0 6 3.6 x
-10 0 4.3 x
-20 0 4.3 x x
-25 0 4.3 x
-25 6 3.6 & 4.3
x
Lower 1st Molar Non-Convertible Single – Funneled-20 0 4.6 x
Slot Torque Distal Offset
Length mm APC™
MBT™ SystemArch Aux.
Lower 1st Molar Non-Convertible Single-20 0 4.3 x x
Lower 1st Molar Double0 0 0 3.6 x
-25 0 7 3.6 x
-20 0 0 4.3 x x
Lower 1st Molar Lip Bumper Convertible Double-25 5 4.3
Upper 2nd Molar Non-Convertible Single0 0 3.6 x
0 6 3.6 x
-10 6 3.6 x
-10 10 3.6 x
-14 10 4.3 x x
-19 8 3.9 x x
Lower 2nd Molar Non-Convertible Single0 0 3.6 x
0 6 3.6 x
-10 0 4.3 x x
-25 6 3.6 x
-25 10 3.6 x
-30 6 3.6 x
Upper 2nd Molar Mini Tube0 0 2.5 x
-10 0 2.5 x
-14 0 2.5 x x
Lower 2nd Molar Mini Tube0 0 2.5 x
-10 0 2.5 x x
-25 0 2.5 x
Upper 2nd Bicuspid Tube-7 0 3.1 x x
Lower 2nd Bicuspid Tube-17 2 3.1 x x
Advanced, PreciseSolutions
for Molars
Victory Series™ Buccal Tubes provide you with
a well-designed, reliable and predictable
orthodontic solution, offering a better experience
both chairside and in treatment. Metal-injection
molded for dimension consistency and rounded
surfaces, the tubes have a contoured shape and
hook designed for both practicality and comfort.
Funneled features allow for easier mesial wire
insertion, and deep distal notch provides more
effective wire crimping. Multiple torque and
angulation options meet the varied treatment
needs of different patients.
Your reliable molar appliance solution
3M CanadaHealth Care Division 300 Tartan Dr. London, ON N5V 4M9 CanadaPhone 1-800-443-1661
3M, APC, MBT, and Victory Series are trademarks of 3M. Used under license in Canada. © 3M 2016. All rights reserved. 70-2021-3966-6 1601
3M Oral Care2510 Conway AvenueSt. Paul, MN 55144-1000 USAPhone 1-800-423-4588Web 3M.com/ortho
3